3
1 SELECTORIZED STRENGTH TRAINING EQUIPMENT SL30-35 Lying Leg Curl Weight Stack (255 lbs) AK50-WS003-0000 Black Pad Set SL30-FEA02-0P01 Upholstery Hardware SL30-HWARE-0000 Black Cap(15) 0017-00042-0969 Selector Pin SK50-S0151-0000 Lanyard Cord 0017-00009-0938 Decal M051-00270-A000 Shield Trim 0017-00042-0989 Add-On Weight 0K50-P0312-0000 5 lbs Guide Rods (2) 0017-00009-0933 Note: Get length from Customer Placard SU30-PL000-0001 Metal Label (2) 0K50-01001-0000 Pulley 0017-00009-0977 Warning Label M051-00260-A000 Weight Stickers M051-00262-A000 (15-300 lbs) M051-00265-A000 (7-140 KG) Cable AK50-CL109-0001 Rubber Grip 0017-00042-0995 Grip Ring 0K50-P0316-2000 Grip Cap OK50-PO315-2000 Set Screw 0017-00101-1406 Weight Donut (2) 0017-00042-993 “T” Knob AK50-S0005-0000 End Cap 0017-00042-0958 Pillow Block 0017-00006-0203 Red Rubber Cap 0017-00042-0952 Rubber Cap 0017-00042-0955 Kicker Arm AK50-S0003-0000 Foot Pads 5 - 3”x4” 0017-00042-1019 End Cap 0017-00042-0958 (Redesigned Tibia Adjustment Mech S/N 070587-Above See last Page)

SL30-35 LYING LEG CURL

Embed Size (px)

DESCRIPTION

SL30-35 LYING LEG CURL

Citation preview

  • 1SELECTORIZED STRENGTH TRAINING EQUIPMENTSL30-35 Lying Leg Curl

    Weight Stack (255 lbs)AK50-WS003-0000

    Black Pad SetSL30-FEA02-0P01Upholstery HardwareSL30-HWARE-0000

    Black Cap(15)0017-00042-0969

    Selector PinSK50-S0151-0000Lanyard Cord0017-00009-0938

    DecalM051-00270-A000

    Shield Trim0017-00042-0989

    Add-On Weight 0K50-P0312-0000

    5 lbs

    Guide Rods (2)0017-00009-0933Note: Get length fromCustomer

    PlacardSU30-PL000-0001

    Metal Label (2)0K50-01001-0000

    Pulley0017-00009-0977

    Warning LabelM051-00260-A000

    Weight StickersM051-00262-A000 (15-300 lbs)M051-00265-A000 (7-140 KG)

    CableAK50-CL109-0001

    Rubber Grip 0017-00042-0995Grip Ring0K50-P0316-2000Grip CapOK50-PO315-2000Set Screw0017-00101-1406

    Weight Donut (2)0017-00042-993

    T KnobAK50-S0005-0000

    End Cap0017-00042-0958

    Pillow Block0017-00006-0203Red Rubber Cap0017-00042-0952

    Rubber Cap0017-00042-0955

    Kicker ArmAK50-S0003-0000

    Foot Pads 5 - 3x40017-00042-1019

    End Cap0017-00042-0958

    (Redesigned TibiaAdjustment MechS/N 070587-AboveSee last Page)

    Edward BartosSk50-s0013-0000 Should only be used on older units where the top plate on the weight stack contains no holes. This kit consists of pin, lanyard attachment and plastic eye loop. The plastic eye loop fits over the Bayonet. The old style pin which was made of plastic is going to be upgraded with a rubber tulip head pin, but will still work with this kit.

    shaferrText BoxCableAK50-CL109-0001

    shaferrText BoxAdd-On Weights 5 lbs.0K50-P0312-0000

    shaferrText BoxAdd-On Weights5 lbs.0K50-P0312-0000

    shaferrLine

    shaferrText BoxReceiver w/CamSL30-S0005-0000KickerSK50-S0122-0000

    shaferrLine

    shaferrText Box

    shaferrText BoxChest Pad0K50-4S038-0000Knee Pad0K50-4S043-0000Kicker Pad0K50-4S008-0000Wear Cover0K50-4E005-0000S

    shaferrText Boxrev. 06/15/05

    morleyjCam w/receiver SL30-S0004-0000

  • 4SL35: STRENGTH 9000 SERIES TRAINING EQUIPMENTRange Limiter

    R/L Cam AssemblySL25-S0008-0000SL35-S0003-0000S 45-S0012-0000ST25-S0010-0000L

    Brass Bushing0017-0009-0925Machined Part0K50-PO324-0000Spring0017-0009-0995Rubber Stop0017-00103-0265Set Screw0017-00101-1448

    Pull Pin KitSK50-S0008-00003-1/4 Bolt

    0017-00101-1425Washer0017-00101-0313Cap Washer0017-00104-03683/8 Nut0017-00103-0229Star Washer0017-00009-0937Back Cap0017-00042-0949

    Pull Pin KitSK50-S0008-0000

    Polished HubSL25-S0006-0000SL35-S0005-0000S 45 AK50-S0012-0000ST25-S0006-0000L

    Shaft Collar (2)0017-00009-0942

    Common PlateAK50-S0008-0000(Used on all R/L Units)

    OLD STYLE Tibia (Kicker)SL25-S0005-0000SL35-S0004-0000SL45-S0011-0000ST25-S0005-0000

    taylorcPillow Block0017-00006-0203

    taylorc

    taylorc

    taylorc

    taylorcOLD STYLE Tibia (Kicker)SL25-S0005-0000SL35-S0004-0000SL45-S0011-0000ST25-S0005-0000

  • 2SELECTORIZED STRENGTH TRAINING EQUIPMENTSL30 Tibia Adjustment Mechanism - S/N 070587-Above

    3/4 Grooved Pins-20K50-P0544-0000

    3/4 Retainer Clips-60017-00100-0192

    3/4 Bushing-20017-00009-0929

    Kicker Link0K50-P0553-0000

    Kicker TubeSL30-S0005-0000

    7/16Retaining Clips-60017-00100-0191

    7/16 Grooved Pin0K50-P0564-0000

    Spring0017-00009-0994

    7/16 Bushing-20017-00009-0931

    Letter StripM051-00362-A000

    Tulip Handle0017-00009-1077

    Pull Pin BracketAK50-S0030-0000

    Handle Pin0K50-P0121-0000

    Black Cap0017-00009-1091

    Swivel Pad MountAK50-S0031-0000

    Bumper0017-00042-1032

    Rivets-20017-00072-0136