Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
SL1010
DOLPHIN ALAVO SUPERLOO SET
› Complete set includes all of the items listed below
› All items of a co-ordinated design to achieve a consistent aesthetic look
throughout the washroom.
› Cost effective alternative to sourcing all items individually.
› Set is delivered in one package for easy installation.
› Powder coated finish available for accessories – please enquire with the
team
› DP4317
› BC408
› DB795
PRODUCT CODES
› SL1010 Superloo Stainless Steel Finish
› SL1010.5 Superloo Black Finish
TECHNIC AL HELPLINE 01424 202224 DOLPHINSOLUTIONS.CO.UK
SL1010 pack contains:
› DS112.180
› ALAVO
Dolphin Toilet Paper, Toilet Brush and Sanitary Bin, Combination Unit
Dolphin Stainless Steel Coat Hook
Dolphin Waste Trap
Dolphin Inform Slimline Wall Tap - Wall Plate version
AlavoWashWall System - Mirror system including foam soap
dispenser, paper towel dispenser, hand dryer, lighting and electrical/
plumbing services integrated.
Dolphin Vanity Trough System - An angled solid surface vanity wash
trough system with water run-off through slots designed to
integrate with the Alavo mirror system.
DS112 Series
DOLPHIN WALL PLATE MOUNTED INFORM
› Dolphin Wall Plate Mounted InForm Tap
› Manufactured from high-quality, highly durable 1.4401 (316) Marine grade stainless steel.
› Self-monitoring analysis and recording technology (smart) allows the Facilities Manager toconnect point to point via the Dolphin InForm App when used with the optionalBluetooth Adaptor (Sold separately – Order product code 25148 )
› Infrared Touch Free Tap – for ultimate hygiene – prevents cross contamination - sensormounted in end of spout
› 90º spout
› Designed to be front mounted for when rear access installation is not possible
› Standard Flow rate – 3.0 litres/minute with the flow regulator (fitted adjacent to solenoid)at any pressure between 0.5 and 6.0 bar, but typically at 3 bar
› Other flow rates available – 1.0 litre/minute, 2.0 litres/minute and 4.0 litres/minute –please specify clearly if one of these alternative flowrates are required.
› Operating pressure: 0.5 bar minimum to 8.0 bar maximum
› Water supply: single inlet cold or pre-mixed – a TMV2 or TMV3 thermostatic mixing valveis recommended for premixed applications
› Maximum operating water temperature - 60°C
› Nominal current: Less than 1mA (Less then 25mA with Bluetooth)
› Nominal power: Less than 1W
› Security time can be adjusted via the App – default 20 seconds (60 seconds max)
› IP68 connector
› Power Source: Plug-in 9 Volt transformers
› Recommended minimum distance between sensor and the bottom of basin = 200mm**
› WRAS approved**Highly reflective surfaces directly beneath the sensor of this product, in particular polished finish basin
wastes/strainers, will cause false activation of the infrared sensors and can result in malfunction. We recommend satinor Matt finish products which can be found on our website.
PRODUCT CODES
› DS112.150 150mm Projection
› DS112.175 175mm Projection
› DS112.200 200mm Projection
› DS112.225 225mm Projection
CODES EXPLAINED
STYLE
DS112 90º Spout – Wall Mounted
DS112.XXX.X
PROJECTIONS
150 / 175 / 200 / 250 mm
DS112.XXX.X
FINISH
1 Brushed Satin
2 Mirror Polished
DS112.XXX.Blue X
COLOUR
Suffix to end of code
(Number allocated by Dolphin Solutions)
TECHNIC AL HELPLINE 01424 202224DOLPHINSOLUTIONS.CO.UK
POWER SUPPLY OPTIONS
› 25147 UK mains adaptor
› 25428 Euro mains adaptor
› 25240 Hardwire transformer
› 25241 Battery pack
ALAVO ADW14124
DOLPHIN ALAVO WASHWALL SYSTEM
› Supplied in preassembled modules which are slid onto the installation rail and fixed to wall› Pneumatically assisted top-hinged mirrors with key lock control access inside system› Overall projection 189mm with no requirement for behind vanity maintenance access› Integrated digital control panel with distribution board and lighting controller› Incoming electrical feed is connected into RCD in control panel, providing power to all
services› Pre wired appliances for rapid installation on site› Water facilities and services fully integrated› Incoming water feeds are connected to integrated pipe system› TMV3 (thermostatic mixing valve) on every tap feed to maintain premixed, regulated water
temperature› Hot and cold feed required› Automatic infrared sensor panel mounted taps installed below system -1.0 GPM (nominal 3.5
LPM)› Taps plumbed through Alavo as standard to provide access for maintenance› Integrated automatic infrared sensor foam soap dispensers fed from refillable reservoir -2,500
shotcapacity› Integrated automatic infrared high velocity energy efficient hand Dryers -13 seconds dry time› Integrated paper towel dispenser› Hand Dryers and paper towel dispensers can be interchangeable after installation (if specified
in advance)› Energy efficient LED RGB perimeter lighting system -full colour range programmable via digital
control panel› Etched and backlit appliance icons for intuitive operation and premium user experience› Energy saving sensor initiates and interrupts sleep mode based on light levels in room› Refill warning light senses low consumables and illuminates to notify for restock› Servicing key switch disables dispensers during cleaning or maintenance (if installed)› We recommend minimum shadow gap of 25mm between the ends of the mirrors and any
abutments› Carcase ends inset by 25mm from mirror ends to enable end décor panels to be installed› Décor panels can be fitted by contractor to match IPS décor
ALAVO TYPEINSTALLATION TYPEAVAILABLE WIDTHSYSTEM WIDTHSYSTEM HEIGHTUSER QUANTITYUSER SPACING
SUPPLY CURRENT (AMPS)SUPPLY VOLTAGE (VOLTS)POWER (WATTS)
SYSTEM WEIGHT
TAP QUANTITYSOAP QUANTITYHAND DRYER QUANTITYTOWERL DISPENSER QUANTITY
PERIMETER HALOICONTHROUGH MIRROR
CONFIGURATION
Alavo Premium - (ALV12)
Both Ends Visible1400MM
1375MM
800MM
1900MM
6A
230V
952.8W
83KG Approx.
1 (PANEL TAPS - DS112.175)
111
Down UpBacklitNot installed
TMV3
TECHNIC AL HELPLINE 01424 202224DOLPHINSOLUTIONS.CO.UK
ALAVO VDW14124
DOLPHIN VANITY TROUGH SYSTEM
› Supplied with heavy duty cantilever brackets which are fixed to the wall› Vanity Troughs are supplied fully assembled with wastes outlets for easy
installation by the contractor› It is extremely important that the brackets fixings are structurally sound as
large point loads can be exerted on these products› Typically when trough length is in excess of3000mm, the trough is joined and
finished by specialist installers on site› If there are any access issues or Dolphin are required to carry out any site
works, it may be necessary for us to make a site survey
1400MM
Both Ends Visible1375MM
450MM
No Splashback ProvidedN/A
42KG Approx.
AVAILABLE WIDTHINSTALLATION TYPEVANITY WIDTHVANITY DEPTHSPLASHBACKBIN CHUTES
VANITY WEIGHT
TECHNIC AL HELPLINE 01424 202224DOLPHINSOLUTIONS.CO.UK
DP4317
DOLPHIN TOILET PAPER, TOILET BRUSH AND SANITARY BIN,COMBINATION UNIT
› Superior quality and timeless design for prestigious washrooms
› Easy-care 18/10 chrome nickel stainless steel combination unit
› Satin finish, welded corners – no sharp edges
› Also available in polished stainless steel or powder coated to a colour of
your choice
› Self-closing sanitary bin flap and vanity flap
› Plastic hygiene insert for sanitary bin – capacity 5 litres
› High quality toilet brush with replaceable head
› Double toilet roll holder
› Built in recess frame
› Ideal for compact ‘supaloo’ designs.
WIDTH 421 MM
HEIGHT 597 MM
PROJECTION 10 MM
RECESS 110 MM
TECHNIC AL HELPLINE 01424 202224DOLPHINSOLUTIONS.CO.UK
BC408
DOLPHIN STAINLESS STEEL COAT HOOK
› Stainless steel construction DIAMETER 19 MM
PROJECTION 50 MM
PRODUCT CODES
› Satin stainless steel BC408
› Polished stainless steel BC408B
TECHNIC AL HELPLINE 01424 202224DOLPHINSOLUTIONS.CO.UK
DB795S
DOLPHIN WASTE TRAP
› 32mm / G1¼” high quality chrome-plated brass bottle trap
› 75mm deep trap
› Suitable for sinks and basins.
› Telescopic, with a 70mm wall seal and minimalist 75mm trap
› Waste outlet length: 320mm from centre of trap
› Product Height: 148-218mm telescopic
› Bottle Diameter: 60mm
TELESCOPIC HEIGHT 148-218 MM
PROJECTION 320 MM
PRODUCT CODES
› Same product in satin chrome DB795C
TECHNIC AL HELPLINE 01424 202224
DOLPHINSOLUTIONS.CO.UK
320
G 1 1/4"
50
60
57
Ø70
Ø35
Ø45
0-8
5
45
133
About Stainless Steel
The corrosion resistance of Dolphin
stainless steel (type 304) washroom
dispensers stems from an extremely thin but
tenacious and self-repairing passive film,
which forms on the surface of the stainless
steel. This imparts the properties of stain
resistance, nontainting of food, hygiene
cleanability and aesthetic appearance which
makes stainless steel the ideal choice for
many high-class articles, including Dolphin
Dispensers in washroom environments.
Further, it does not chip, flake, craze, crack
or break.
Stainless steel will be unaffected by normal
conditions of everyday use. Routine simple
gentle cleaning will reward the owner with a
product, which retains its properties and
appearance throughout years of constant
daily usage. All grades of stainless steel will
stain and discolour due to surface deposits,
therefore they will never be completely
maintenance free.
Because of stainless steel’s reputation for
durability, Dolphin washroom dispensers are
sometimes assumed to be indestructible,
and therefore subjected to misuse or even
abuse. Care should be taken to avoid such
‘abnormal’ use.
A frequent cause of staining and micro
pitting of stainless steel is splashing with
undiluted bleach solutions and mortar
cleaners.
Initial Cleaning
• Initial cleaning after installation should be
done as soon as possible to remove any
dust, dirt and grime that may have settled
on the surface of the stainless steel during
installation or by other surrounding
building works.
• The plastic covering on any new stainless
steel surface will prevent natural self
passivation. This will only commence once
the plastic is removed. Any adhesive
residues and substances present in the
environment (e.g. glue, grime or salts)
which settle on the surface, will impede
and impair the self-passivation.
• Clean the surface to remove any adhesive
residues using Inox Clean (see cleaning
procedure below).
• Frequently clean the surface during the
initial weeks of exposure to keep it free of
settled substances. This also stimulates the
formation of the passive film.
CARE MAINTENANCE AND CLEANING
OF DOLPHIN AND DOLPHIN PRESTIGE
STAINLESS STEEL WASHROOM PRODUCTS
1. Filling the Dispenser
• This dispenser is only designed for PH
neutral liquid soaps.
Avoid filling very thick liquids.
Use of any other type of soap or liquid is
not covered by our warranty.
• When filling with liquid soap, be sure to
wipe off liquid spilled on to the container.
Never overfill.
2. Cleaning & Maintaining the Dispenser
• If the dispenser is not used for a long
period of time and becomes clogged, pour
ONLY warm water into the dispenser and
gently pump it to clear the blockage.
NEVER try inserting a sharp object e.g. pin
into the soap nozzle, which could
irreparably damage the pump and void
the warranty.
• ONLY clean inside the dispenser with
warm water, NEVER use solvents or
aggressive household cleaners like bleach,
acids (e.g. descalers) or ammoniabased
bathroom cleaner.
• To clean the outside of the dispenser, use
warm soapy water or approved stainless
steel cleaners (see Dolphin Dispensers –
Cleaning and Maintenance of Stainless
Steel on the following link
http://www.dolphindispensers.co.uk/home/
literature.php)
• Should brown deposits, that appear to be
rust or corrosion, appear around the lid or
pump, remove them with a brush or pan
cleaning pad and soapy water (never use
an abrasive cleaner with a polished finish
and only in the direction of the ‘grain’ with
a brushed finish) - see above link for
further information.
• IT SHOULD BE NOTED that whilst the
aforementioned deposit may appear like
rust or corrosion this is very rarely the
case; a good clean will usually reveal an
un-corroded dispenser. The brown is
usually a result of soap left on the stainless
steel surface too long although changing
to a milder liquid soap with a neutral PH
can reduce the affects.
FILLING, CLEANING AND MAINTENANCE
OF STAINLESS STEEL SOAP DISPENSERS
Introduction
Dolphin Powder Coatings are organic
coatings which need to be cleaned and
maintained regularly to ensure that the
decorative and protective properties of the
coating are retained.
C L E A N I N G C OAT E D
S U R FAC E S
Method
Usual maintenance of powder coating
products can be done with an appropriate
cleaning product, followed by clear water
rinsing and wiping using a soft cloth.
All surfaces should be cleaned using a soft
cloth or sponge, using nothing harsher than
natural bristle brushes.
If the project is subject to any hazardous
unusual environmental factors, or is close to
salt water, an estuary or marine
environments then Dolphin must be
consulted on an individual project basis.
If the coating is very heavily soiled (i.e. due
to lack of maintenance), then the
recommendation is to consult a specialised
company.
Cleaning Products
Before cleaning the cleaning agent’s
datasheet must be consulted.
Usual maintenance can be done using water
with mild detergent (pH 5 to 8).
If the atmospheric pollution has resulted in
heavy soiling of the coating, some stains or
marks may require stronger domestic
products such as products based of alcohol,
petroleum spirits, white spirit, or bleach
(diluted to 5%). In this case, it is necessary
to rinse the coating immediately after the
cleaning product has been used.
In no circumstance should any abrasive
cleaner or polish, or any cleaner containing
ketones or esters be used.
Frequency
The frequency of cleaning depends in part
on the standard of appearance that is
required and also the requirements to
remove deposits, which could, during
prolonged contact with either the powder
film or the metal substrate, (if exposed)
cause damage.
POWDER COATING
C L E A N I N G A N D M A I N T E N A N C E G U I D E L I N E S
Dolphin Solutions Ltd
Southpoint, Compass Park,
Junction Road
Bodiam, TN32 5BS,
United Kingdom
T +44 (0)1424 202 224
dolphinsolutions.co.uk
© Dolphin Solutions Ltd