Upload
vankien
View
215
Download
0
Embed Size (px)
Citation preview
Dynon Avionics, Inc. www.DynonAvionics.com Voice: (425) 402-0433 Fax: (425) 984-1751Dynon Avionics, Inc. www.DynonAvionics.com Voice: (425) 402-0433 Fax: (425) 984-1751
SV-ADSB-470 Module. Approximately 7” x 4.5” x 1.1”
Pricing: SV-ADSB-470 ADS-B UAT Band Traffic and Weather Receiver (US only) $995
SkyView ADS-B Traffic and Weather
SV-ADSB-470 UAT Band Traffic and Weather Receiver Traffic and Weather for SkyView. The SV-ADSB-470is a lightweight remote mounted receiver for ADS-B IN information that utilizes an externally mounted antenna for superior ADS-B reception.
ADS-B WeatherSubscription-free weather displayed on SkyView, including NEXRAD radar, METARs and TAFS. Textual airport weather data can be displayed for nearest airports or for a specific airport identifier.
ADS-B TrafficReceives ADS-B TIS-B traffic with precise location, altitude, speed, and direction. Includes both traf-fic broadcast from other aircraft equipped with ADS-B UAT transmitters, and data broadcast from ADS-B ground stations (includes all the FAA’s radar targets). (Requires SkyView SV-XPNDR-261/262 transponder, currently the only transponder which meets the requirements.)
TFR InformationTFR NOTAMs are displayed graphically on SkyView’s map page.
SkyView ADS-B Receiver has a 3-year Dynon Warranty.
To Obtain This Feature: You Need:
ADS-B Traffic (SV-XPNDR-262 not usable after 2020 for ADS-B Out)
* SkyView System * SV-ADSB-470* SV-XPNDR-261/262
ADS-B Weather and TFRs (US only in current ADS-B coverage areas.)
* SkyView System * SV-ADSB-470
TIS Traffic(Non-ADS-B. Available today for US in some primary radar cover-age areas. SV-ADSB-470 replaces TIS with ADS-B traffic.)
* SkyView System* SV-XPNDR-261/262
Dynon Avionics, Inc. www.DynonAvionics.com Voice: (425) 402-0433 Fax: (425) 984-1751
SkyView Mode-S Transponders
The Lowest Cost, Smallest and Lightest Mode-S Transponders Available
Integrated: Made for the SkyView System, with control and annunciation appearing on the SkyView Display. The transponder module can be mounted anywhere in the airplane that is convenient.
Small and Light with Easy Installation: At only 1 pound and 5.6” by 1.8” by 2.4”, the transponder module can fit into the smallest places and aircraft. A quick release mounting system allows for simple installation and easy removal if needed for service.
Traffic Information: When an SV-ADSB-470 receiver is installed with the SV-XPNDR-26X, SkyView will display reliable, accurate ADS-B traffic. Nearby traffic threats can generate audio alerts to notify the pilot of possible collisions. The SV-XPNDR-261/262’s ADS-B Out capability communicates with the ADS-B ground stations, prompting them to send a traffic portrait that includes all known ADS-B and radar targets around the SkyView-equipped aircraft.
The SV-XPNDR-261/262 also receives TIS traffic in the event there is no ADS-B information available for display on SkyView. TIS traffic is a US traffic service broadcast in some US radar coverage areas.
US 2020 ADS-B Out Compliance: The SV-XPNDR-261 is the first transponder on the experimental market that will be able to be used to satisfy the FAA’s “2020 ADS-B Out mandate”. Note, full ADS-B Out compliance in 2020 (US) requires a TSO’d / ADS-B compliant GPS to be connected. Also, in the US, only the higher power SV-XPNDR-261 will meet the FAA’s 2020 ADS-B Out mandate.
Dynon Warranty, Support, and Service: SkyView transponders come with a 3-year Dynon Warranty.
Pricing: SV-XPNDR-261 Mode-S Class 1 Transponder (FAA 2020 ADS-B Out compliant in the US) $2,200
SV-XPNDR-262 Mode-S Class 2 Transponder (<15,000 feet, <175 knots only) $1,800
SV-XPNDR-261 SV-XPNDR-262
Usage 250 Watt; Can meet 2020 FAA ADS-B Out mandate 130 Watt: <15,000 ft, <175 knots only; cannot be used for 2020 FAA ADS-B Out mandate
Type Class 1 Mode S Class 2 Mode S
Compliance ETSO 2C112b Class 1 Level 2els, ETSO C166a Class B0, TSO C112c Class 1 Level 2els, TSO C166b Class B1S
ETSO 2C112b Class 2 Level 2els, ETSO C166a Class B0, TSO C112c Class 2 Level 2els, TSO C166b Class B0
Supply Voltage (DC) 9 - 33 V
Power Consumption 6 Watts (typical)(idle: 0.15 A, active: 0.34 A at14 V)
5 Watts (typical) (idle: 0.15 A, active: 0.28 A at 14 V)
Transmitter Power 250 W nominal at connector 130 W nominal at connector
Weight 0.9 Lb. (400 g)
Dimensions 2.4” x 1.8” x 5.6” (62 x 45 x 141 mm)