Sjzl20084494-ZXSS10 SS1b (V2.0.1.06.1) Soft Switch Control Equipment Billing Command User Guide

ZXSS10 SS1b SoftSwitch Control Equipment

Billing Command User Guide

Version 2.0.1.06.1

ZTE CORPORATIONZTE Plaza, Keji Road South,Hi-Tech Industrial Park,Nanshan District, Shenzhen,P. R. China518057Tel: (86) 755 26771900 Fax: (86) 755 26770801URL: http:// en sup p ort. zte.com.cn E-mail: support @zte.com.cn

http://support.zte.com.cn/

mailto:[email protected]

LEGAL INFORMATION

Copyright © 2007 ZTE CORPORATION.

The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.

All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE CORPORATION or of their respective owners.

This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose, title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the use of or reliance on the information contained herein.

ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications covering the subject matter of this document. Except as expressly provided in any written license between ZTE CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter herein.

ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.

Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.

The ultimate right to interpret this product resides in ZTE CORPORATION.

Revision History

Date Revision No. Serial No. Reason for Issue

Oct. 15th, 2008 R1.0 sjzl20084494 Product upgrading

ZTE CORPORATIONValues Your Comments & Suggestions!Your opinion is of great value and will help us improve the quality of our product documentation and offer better services to our customers.

Please fax to (86) 755-26772236 or mail to Documentation R&D Department, ZTE CORPORATION, ZTE Plaza, A Wing, Keji Road South, Hi-Tech Industrial Park, Shenzhen, P. R. China 518057.

Thank you for your cooperation!

Document Name

ZXSS10 SS1b SoftSwitch Control Equipment Billing Command User Guide

Product Version

V2.0.1.06.1Document Revision Number

R1.0

Serial No. sjzl20084494Equipment Installation Date

Your evaluation of this documentation

Presentation:

(Introductions, Procedures, Illustrations, Completeness, Level of Detail, Organization, Appearance)

Good Fair Average Poor Bad N/A

Accessibility:

(Contents, Index, Headings, Numbering, Glossary)


Intelligibility:

(Language, Vocabulary, Readability & Clarity, Technical Accuracy, Content)


Your suggestions for improvement of this documentation

Please check the suggestions which you feel can improve this documentation:

Improve the overview/introduction Make it more concise/brief

Improve the Contents Add more step-by-step procedures/tutorials

Improve the organization Add more troubleshooting information

Include more figures Make it less technical

Add more examples Add more/better quick reference aids

Add more detail Improve the index

Other suggestions

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

__________________________________________________________________________

# Please feel free to write any comments on an attached sheet.

If you wish to be contacted regarding your comments, please complete the following:

Name Company

Postcode Address

Telephone E-mail

This page is intentionally blank.

Contents

About This Manual...................................................i

Purpose.............................................................................................i

Intended Audience............................................................................i

Prerequisite Skill and Knowledge......................................................i

What Is in This Manual......................................................................i

Conventions.....................................................................................ii

How to Get in Touch.........................................................................ii

Declaration of RoHS Compliance...............................v

Chapter 1..............................................................1

Customer Care System Network Architecture.............1

Overview..........................................................................................1

Network Architecture.......................................................................1

Introduction to Communication Flow of Customer Care System.....2

Chapter 2..............................................................5

Introduction to Commands Usages of Customer Care System.................................................................5

Overview..........................................................................................5

MML Command Input Rules.............................................................5

MML Command Output Rules..........................................................6

Chapter 3..............................................................9

Common Billing Commands......................................9

Overview..........................................................................................9

Ordinary User Subscription Command (4210)...............................10

SIP User Subscription Command (4190)........................................19

User Deletion Command (4206)....................................................22

User Suspension Command (4209)...............................................24

Service Access Command (4208)..................................................25

User Call Authority Modification Command (4204)........................26

Owe Fee Service Access/Suspension Command (4202)................28

Number Change Command (4202)................................................30

Announcement Play Record Deletion Command (4054)................32

Not Ready for Service Command (4202).......................................32

Public Telephone Billing Command (4202)....................................34

Call Restriction Group Modification Command (4202)...................35

Commercial Group User Addition Command (4233)......................36

Commercial Group User Deletion Command (4234)......................38

Ordinary User to ISDN User Conversion Command (4272)............39

ISDN User to Ordinary User Conversion Command (4274)............41

Ordinary Service Registration Command (4302)...........................42

Ordinary Service Deletion Command (4303).................................44

MSN/DDI Service of ISDN User Creation Command (7324)............45

MSN/DDI Service of ISDN User Deletion Command (7326)............46

Telephone Relocation Command (7289).......................................47

Ordinary User to V5 User Conversion Command (4835)...............49

V5 User to Ordinary User Conversion Command (4837)...............51

Modifying the Relationship between Telephone Number and TID (7283)............................................................................................52

Creating V5 Number Allocation User (4848)..................................53

Modifying SIP User Password (7799)..............................................56

Creating Customer Care System Intelligent Subscription Service (7272)............................................................................................57

Deleting Customer Care System Intelligent Subscription Service (7273)............................................................................................58

Modifying SMS Attributes (4202)...................................................59

Creating User Password Service (7321)........................................60

Creating User Hotline Number (4307)...........................................61

Modifying User’s Unused Attributes (4202)..................................62

Querying Single User (7278)..........................................................64

Appendix A..........................................................67

Meaning of Service Enumeration Value (Corresponding to the TYPE Parameter of Ordinary Subscription Command)............................67

Definition of Call Authority Enumeration.......................................69

Glossary..............................................................71

Figures................................................................73

Tables.................................................................75

Index.................................................................................77

About This Manual

Purpose

This manual describes the frequently used billing commands on the ZXSS10 SS1b SoftSwitch Control Equipment.

Intended Audience

This manual is intended for engineers and technicians who perform operational activities on the ZXSS10 SS1b SoftSwitch Control Equipment.

Prerequisite Skill and Knowledge

To use this document effectively, users must have a general understanding of SoftSwitch technology. Familiarity with following aspects is helpful.

ZXSS10 SoftSwitch system and its components

ZXSS10 SoftSwitch interfaces

ZXSS10 SoftSwitch hardware and software architecture

What Is in This Manual

This manual contains the following chapters:

T A B L E 1 C H A P T E R S U M M A R Y

Chapter Summary

Chapter 1,

Common Billing Commands

Describes the common billing commands in terms of their format, function and related parameters.

Chapter 2,

Introduction to Commands Usages of Customer Care System

Describes some rules of input/output MML.

Confidential and Proprietary Information of ZTE CORPORATION i

Chapter Summary

Chapter 3,


Describes common billing commands, as well as description of parameters and examples

Conventions

ZTE documents employ the following typographical conventions.

T A B L E 2 T Y P O G R A P H I C A L C O N V E N T I O N S

Typeface Meaning

Italics References to other Manuals and documents.

“Quotes” Links on screens.

Bold Menus, menu options, functions, input fields, radio buttons, check boxes, drop-down lists, dialog box names, window names.

CAPS Keys on the keyboard and buttons on screens and company name.

T A B L E 3 M O U S E O P E R A T I O N C O N V E N T I O N S

Typeface Meaning

Click Refers to clicking the primary mouse button (usually the left mouse button) once.

Double-click Refers to quickly clicking the primary mouse button (usually the left mouse button) twice.

Right-click Refers to clicking the secondary mouse button (usually the right mouse button) once.

Drag Refers to pressing and holding a mouse button and moving the mouse.

How to Get in Touch

The following sections provide information on how to obtain support for the documentation and the software.

If you have problems, questions, comments, or suggestions regarding your product, contact us by e-mail at [email protected]. You can also call our customer support center at (86) 755 26771900 and (86) 800-9830-9830.

ZTE welcomes your comments and suggestions on the quality and usefulness of this document. For further questions, comments, or suggestions on the documentation, you can

Confidential and Proprietary Information of ZTE CORPORATION ii

Typographical Conventions Mouse

Operation Conventions

Customer Support

Documentation Support

Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.

contact us by e-mail at [email protected]; or you can fax your comments and suggestions to (86) 755 26772236. You can also browse our website at http://support.zte.com.cn, which contains various interesting subjects like documentation, knowledge base, forum and service request.

Confidential and Proprietary Information of ZTE CORPORATION iii

ZXSS10 SS1b (V2.0.1.06.1) SoftSwitch Control Equipment Billing Command User Guide


iv Confidential and Proprietary Information of ZTE CORPORATION

Declaration of RoHS Compliance

To minimize the environmental impact and take more responsibility to the earth we live, this document shall serve as formal declaration that the ZXSS10 SS1b SoftSwitch Control Equipment manufactured by ZTE CORPORATION are in compliance with the Directive 2002/95/EC of the European Parliament - RoHS (Restriction of Hazardous Substances) with respect to the following substances:

Lead (Pb)

Mercury (Hg)

Cadmium (Cd)

Hexavalent Chromium (Cr (VI))

PolyBrominated Biphenyls (PBB’s)

PolyBrominated Diphenyl Ethers (PBDE’s)

The ZXSS10 SS1b SoftSwitch Control Equipment manufactured by ZTE CORPORATION meet the requirements of EU 2002/95/EC; however, some assemblies are customized to client specifications. Addition of specialized, customer-specified materials or processes which do not meet the requirements of EU 2002/95/EC may negate RoHS compliance of the assembly. To guarantee compliance of the assembly, the need for compliant product must be communicated to ZTE CORPORATION in written form.

This declaration is issued based on our current level of knowledge. Since conditions of use are outside our control, ZTE CORPORATION makes no warranties, express or implied, and assumes no liability in connection with the use of this information.

Confidential and Proprietary Information of ZTE CORPORATION v

ZXSS10 SS1b (V2.0.1.06.1) SoftSwitch Control Equipment Billing Command User Guide


vi Confidential and Proprietary Information of ZTE CORPORATION

C h a p t e r 1

Customer Care System Network Architecture

Overview

This chapter introduces the network architecture of customer care system.

This chapter includes the following topics.

Topic Page No.

Network Architecture 1

Introduction to Communication Flow of Customer Care System

2

Network Architecture

BOSS interacts with SSNE through SSNE Interface Message Processor. Direct interaction between BOSS and SSNE is not allowed. Figure 1 shows the network architecture.

Confidential and Proprietary Information of ZTE CORPORATION 1

Introduction ContentsOverview

F I G U R E 1 C U S T O M E R C A R E S Y S T E M

Before sending service messages (including customer care system message, traffic message and alarm interface message). BOSS should set up TCP/IP SOCKET connection with SSNE Interface Message Processor. It is one-to-one relationship, guaranteed by BOSS, between BOSS and the SSNE Interface Message Processor. BOSS is not allowed sending multiple Sockets to the SSNE Interface Message Processor for connection. Free BOSS could keep the connection with the SSNE Interface Message Processor only by replying to the heart beat message. BOSS replies to the heart beat message sent through the SSNE Interface Message Processor. In addition, SSNE, as well as the SSNE Interface Message Processor, has one set of authentication mechanism respectively. It is necessary for BOSS, before sending MML, to send the authentication MML and get the authentication qualifications from SSNE and the SSNE Interface Message Processor.

Introduction to Communication Flow of Customer Care System

Communication flow of customer care system is as follows.

1. It is required to log in to the IMP (Interface Message Processor) after BOSS is successfully connected to the IMP. Only by logging in to the IMP could commands be sent to SSNE that is managed by the IMP. There is not any connection between the user login of the IMP and the user login of SSNE.

Note: There is any connection between the user login of the IMP and the user login of SSNE. IMP users define the related configuration files, while for SSNE, its users and passwords are defined by NE.


Overview

Chapter 1 Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.

2. After logging IMP, operator sends MMLs to NE. Furthermore, operator logs in to NE before sending a request. After sending MMLs, the operator exits from NE if further services are not required. The process of sending MMLs includes login and logout.

3. For unwanted NE services, the operator should log out from current NE first, and again log out from IMP. Figure 2 shows the communication flow of customer care system.

F I G U R E 2 T H E C O M M U N I C A T I O N F L O W O F C U S T O M E R C A R E S Y S T E M


ZXSS10 SS1b (V2.0.1.06.1) SoftSwitch Control Equipment Server Billing Command User Guide


4 Confidential and Proprietary Information of ZTE CORPORATION

C h a p t e r 2

Introduction to Commands Usages of Customer Care System

Overview

This chapter introduces some rules of input/output MMLs.


Topic Page No.

MML Command Input Rules 5

MML Command Output Rules 6

MML Command Input Rules

Rules for inputting MML commands are as follows.

An input MML command begins with the command code that specifies the function. If further information is required, operator inputs the parameter following the command code, separating them with the colon. The parameters are defined by the parameter block.

If the parameter block includes two or more parameters, operator separates them with commas.

If both parameter name and parameter value are included in a parameter, then it is separated by equal mark.

If without the parameter value, operator should remove the related parameter name and equal mark, as well as the comma following the parameter.


Introduction ContentsOverview

If the parameter is omitted, then default value is taken into account. Also, if the parameter is not omitted, a parameter value is specified to indicate the default value.

Some MML parameters require an array called parameter multi-instance. Instances are separated by the “&” character. For example, 5 & 9 indicates simple information unit (5 and 9). At two sides of the “&” character are values of same type.

Parameters of structure type are called compound parameters. For example, Parameter CALLINGNUM is a compound one, which is made up by three simple-type fields (called virtual parameters). i.e., TDC (STRING type), TRG (WORD type), and MG (WORD type). The “-“character connects virtual parameters as follows.

CALLINGNUM =“4580001”-1-2

Here, 4580001 indicate TDC, 1 indicates TRG, and 2 indicate MG. The order for inputting the virtual parameters can not be altered.

Parameters of a command can be mandatory, optional, or default. When the command is used, its mandatory parameters should be specified, the optional parameters are entered as required, and default parameters can be omitted (if so, system adopts its default value).

For a STRING-type parameter, it is made up of a series of characters, including double quotation marks.

For a DATE-type parameter, it is written in YYYY-MM-DD order. YYYY is made of four digits; MM is made up of two digits, while DD is made up of two digits. A hyphen is located between YYYY and MM, as well as MM and DD (such as 1997-01-16).

For a TIME-type parameter, it is written in HH:MM:SS format. HH is made of two digits, ranging from 00 to 23, including 23; MM is made up of two digits, ranging from 00 to 59, including 59; SS is made up of two digits, ranging from 00 to 59, including 59 (such as 12:25:01).

For a Date Time-type parameter, it is written in YYYY-MM-DD HH:MM:SS format (such as 1997-01-16 12:25:01).

MML Command Output Rules

The output format is as follows.

ACK: DateTime: Command No: Result

1. An output MML command begins with ACK, indicating the response to an input MML.

2. For a DateTime-type parameter, it is written in YYYY-MM-DD HH:MM:SS format, indicating the response time.


Overview


3. Command No. indicates the response to a MML. The results follow command number in RETN= [, DESC=] [, ID =, NUM=, RESULT=] format.

RETN is a mandatory option for results. 0 indicates the MML has been correctly executed, while other values indicate errors. For more details, see the error code meaning following each command.

DESC, an optional parameter, explains the error code.

[, ID =, NUM=, RESULT=], used to describe the record block, can be entered either for a single time or multiple times. Record blocks are separated by the “&&” character. One record block corresponds to a table with several rows and columns. NUM indicates the number of records (i.e., the number of rows) of record block and An ID is allotted to every record block. Each MML returns the description of the record blocks in use, including formats of records (like related output parameters and their types).

RESULT represents the actual data (records/rows) of the record block. Recodes are separated by the “&” characters. One record is made up of several parameters that are separated by semicolons.





C h a p t e r 3


Overview

This chapter introduces common billing commands, as well as description of parameters and examples.


Topic Page No.

Ordinary User Subscription Command (4210) 10

SIP User Subscription Command (4190) 20

User Deletion Command (4206) 24

User Suspension Command (4209) 25

Service Access Command (4208) 26

User Call Authority Modification Command (4204) 28

Owe Fee Service Access/Suspension Command (4202) 29

31

Announcement Play Record Deletion Command (4054) 33

Not Ready for Service Command (4202) 34

Public Telephone Billing Command (4202) 35

Call Restriction Group Modification Command (4202) 37

Commercial Group User Addition Command (4233) 38

Commercial Group User Deletion Command (4234) 39

Ordinary User to ISDN User Conversion Command (4272)

40

ISDN User to Ordinary User Conversion Command (4274)

43

Ordinary Service Registration Command (4302) 43


Introduction Contents

Topic Page No.

Ordinary Service Deletion Command (4303) 45

MSN/DDI Service of ISDN User Creation Command (7324)

46

MSN/DDI Service of ISDN User Deletion Command (7326)

48

Telephone Relocation Command (7289) 49

Ordinary User to V5 User Conversion Command (4835) 51

V5 User to Ordinary User Conversion Command (4837) 52

Modifying the Relationship between Telephone Number and TID (7283)

54

Creating V5 Number Allocation User (4848) 55

Modifying SIP User Password (7799) 58

Creating Customer Care System Intelligent Subscription Service (7272)

59

Deleting Customer Care System Intelligent Subscription Service (7273)

60

Modifying SMS Attributes (4202) 61

Creating User Password Service (7321) 63

Creating User Hotline Number (4307) 64

Modifying User’s Unused Attributes (4202) 65

Querying Single User (7278) 66

Ordinary User Subscription Command (4210)

CREATE_XML_SDN:NET=?, LATA=?, SDN1=?, SDN2=?, DEVCODE=?, IPADDR=?, DEVSTYLE=?, ATTRMOD=?, UNIT=?, SUBUNIT=?, CIRCUITNO=?, TYPE=?, PORTID=?, ENRIGHTO=?, ENRIGHTI=?, DNMOD=?, NODEID=?

This command is used to complete the ordinary user subscription function (aiming at users that are accessed to SS through the access gateway). When an account is created, both call authorities and types of services to be registered can be customized.

Command automatically creates the subscriber, node, TID (only TID, rather than RTP, could be created under the AG), the node’s protocol attributes (including the packet template, default attribute template), subscriber call authority template, and register new service as well. The subscriber created via the command is one with the access gateway. Protocol types include H.248, H.323 and MGCP.

Note: With regard to AG device, this command does not support the cross-subunit subscription in batch. Therefore, the maximum


Format Function


number of users in a batch of subscription is 32 (number of circuits in a subunit).

SN Type Name DescriptionRange

Selection

1 INT\BYTE NET Network type 0-32Mandatory

2 INT\WORD LATA Area code0-65535

Mandatory

3STR\KEYBOARD

SDN1 Start number 2-40Mandatory

4STR\KEYBOARD

SDN2 End number 0-40 Optional

5STR\STRING

DEVCODEGateway device code

0-25 Optional

6STR\STRING

IPADDR IP address 0-16 Optional

7 INT\DWORD PORTID Port number0-4294967295

Optional

8 INT\WORD DEVSTYLE Gateway type0-65535

Mandatory

9 INT\WORD ATTRMOD User template number

0-65535

Optional

10STR\STRING

TYPE Service type 0-5 Optional

11STR\STRING

ENRIGHTO

Activated outgoing call authority type

0-5 Optional

12STR\STRING

ENRIGHTIActivated incoming call authority type

0-5 Optional

13 INT\WORD UNIT Unit number0-65535

Optional

14 INT\WORD SUBUNITSub-unit number

0-65535

Optional

15 INT\WORDCIRCUITNO

Circuit number

0-65535

Optional

16 INT\WORD DNMODDigit process template No.

0-65535

Optional

17 INT\DWORD NODEIDGateway node ID

0-2147483647

Optional

18 INT\BYTEUSEMODDAS

To use/Not use the digit analyzer of the user template

0-1 Optional

19 INT\WORD DAS Digit analyzer 0- Optional


Parameters



Selection

65535

20 INT\BYTE PORTTYPEType of carried number

0-2 Optional

21STR\KEYBOARD

NPCarried number

0-40 Optional

22 INT\BYTE TS

To use/Not use the service at terminal side

0-1 Optional

23 INT\BYTE WIMAXThe marking of the WIMAX subscriber

0-1 Optional

24STR\STRING

AREAINFO

Information regarding the area the subscriber is located at

0-8 Optional

25 INT\WORD AREA Area code0-65535

Mandatory

26 INT\BYTE SIP302 To allow/Not allow the terminal processing SIP 302 messages

0-1 Optional

27STR\STRING

REMARKName of the node

0-64 Optional

Note: For all the above parameters, no default values.

Parameter NET is customized by the subscriber. For example, 1 indicates China Telecom. LATA indicates the area code. For example, the area code of Nanjing is 025.

SDN1 and SDN2 represent start telephone number and end telephone number respectively. SDN2 is used only when the subscription is performed in batch.

IPADDR represents the IP address of the terminal such as access gateway IAD or AG. DEVCODE is the device code (domain name, such as [202.202.202.202]) or MAC address (at this moment, the input format of the MAC address is MAC: 00:B0:D0:8F:D0:F0), of the terminal such as the access gateway IAD or AG. Select any of two parameters when a subscriber is defined. The parameter selection here depends on the gateway authentication mode. If the gateway has no authentication (with not only the IP address, but also the domain name), then select parameter IPADDR. If the gateway uses MGCP domain name authentication (with the domain name but without the IP address), at this moment, the protocol type of the node must be MGCP protocol or NCS protocol. Select parameter DEVCODE with the ordinary domain name format. If the gateway uses MAC address


Parameter Description


authentication (only with the MAC address without the domain name and IP address, and gateway protocol type is H248), select parameter DEVCODE with MAC address format.

PORTID represents the port number of IAD terminal, i.e. TID of subscriber line.

DEVSTYLE represents the device type of terminal, which is used to identify a concrete device and viewed at SS side.

ATTRMOD represents user template number. The user template number represents the collection of user attributes, including call authority template, subscriber billing category and terminal property etc. The subscriber digit analyzer is acquired from the gateway cluster corresponding to the hundreds group, rather than subscriber template.

UNIT represents unit number of AG device, SUBUNIT is the subunit number, CIRCUITNO is the circuit number (the minimum value is 0).

TYPE represents the enumeration value of service type for the user, is a multi-instance parameter (refer to Appendix). ENRIGHTO represents the enumeration value with outgoing call authority, is also a multi-instance parameter (refer to Appendix). ENRIGHTI represents the enumeration value with incoming call authority, is also a multi-instance parameter. Both service type and call authority data are defined at user template. If the data on the template does not meet the special requirements of users, Parameter TYPE, ENRIGHTI and ENRIGHTO are used to customize the service data or call authority data of users.

DNMOD represents the number of the digit process template, which is a collection of basic attributes of subscribers, including the pre-analysis process, caller number conversion, and original called number conversion, etc.

NODEID (an optional parameter) represents GW’s node ID. NODEID is used only when the customer has some special requirements to specify the node of the equipment. When NODEID is sent after the 4210 command is executed, if the domain name and the IP address do not conflict with the nodes inside the SS, NODEID acts as the node ID of the user. And a new node is created with NODEID.

USEMODDAS is used to decide the use of the digit analyzer for the user template. USEMODDAS=1 represents such digit analyzer is used. Otherwise, such digit analyzer is not used. Instead, the digit analyzer of GW cluster with respect to hundreds group is validated.

DAS ranks the top priority if used to specify the digit analyzer of the user. In other words, DAS is used as the digit analyzer of the user if above 0, no matter how the USEMODDAS parameter is used.

PORTTYPE represents the type of the carried number. NP is the carried number. PORTTYPE=1 represents no NP service, 1 represents portion, and 2 represents portout.

TS is used to decide the use of the services at terminal side.



WIMAX=0 indicates the non-WIMAX subscriber, and 1 indicates the WIMAX subscriber.

AREAINFO, information regarding the area the WIMAX subscriber is located at, is used to search related module number in the roaming registration attribute module.

AREA, the area code used to distinguish user templates, is meaningless.

SIP302 is used to allow the terminal processing SIP 302 messages. If the terminal is allowed to process the SIP 302 messages, meanwhile, it is necessary to select services at the terminal side. SIP302=0 indicates the terminal is not allowed, and 1 indicates the terminal is allowed.

REMARK, name of the node, is validated when an initial node is automatically created. However, REMARK is invalid for an already existent node.

1. Adding an IAD subscriber without certification on the access gateway

CREATE_XML_SDN:NET=2,LATA=25,SDN1=“5550000”, SDN2=”5550031”,IPADDR=”102.102.102.102”,DEVSTYLE=3,ATTRMOD=1,TYPE=”1”&”2”&”3”,PORTID=1,ENRIGHTO=”1”&”2”&”7”, ENRIGHTI=”3”&”4”&”5”, DNMOD=1;

Meaning: Creates users from No. 5550000 to No. 5550031, whose IP address of access gateway (IAD) is 102.102.102.102, device type is 3, and user template is 1. The following services are registered: call forwarding on busy, call forwarding on no reply and three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. The gateway’s port1 is occupied and digit process template1 is used.

2. Adding an IAD subscriber with MGCP domain name certification on access gateway

CREATE_XML_SDN:NET=2,LATA=25,SDN1= “5550000”,SDN2=”5550031”,DEVCODE=”[102.102.102.102]”,DEVSTYLE=3,ATTRMOD=1,TYPE=”1”&”2”&”3”,PORTID=1,ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5”;

Meaning: Creates users from No. 5550000 to No. 5550031 whose domain name of the access gateway (IAD) is [102.102.102.102], device type is 3, and user template is 1. The following services are registered: call forwarding on busy, call forwarding on no reply and three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. The gateway’s port1 is occupied.

3. Adding an IAD subscriber with the MAC address certification on the access Gateway


Examples


CREATE_XML_SDN:NET=2,LATA=25,SDN1= “5550000”,SDN2=”5550031”,DEVCODE=” MAC:00:B0:D0:8F:D0:F0”,DEVSTYLE=3,ATTRMOD=1,TYPE=”1”&”2”&”3”,PORTID=1,ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5”;

Meaning: Creates users from No. 5550000 to No. 5550031 whose MAC address of the access gateway (IAD) is 00B0D08FD0F0, device type is 3, and user template is 1. The following services are registered: call forwarding on busy, call forwarding on no reply, three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. No. 1 port of the gateway is occupied.

4. Adding an IAD subscriber without the access gateway information of the subscriber on the SS

CREATE_XML_SDN:NET=2,LATA=25,SDN1= “5550000”,SDN2=”5550031”,IPADDR=”102.102.102.102”,DEVSTYLE=3,ATTRMOD=1,TYPE=”1”&”2”&”3”,PORTID=1,ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5”;

Meaning: Creates users from No. 5550000 to No. 5550031 with device type 3 and user template 1. The following services are registered: call forwarding on busy, call forwarding on no reply, three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. No. 1 port of the gateway is occupied. On the SS, add a node configured with the IP address 102.102.102.102, no certification, H.248 protocol, and node device type 3.

CREATE_XML_SDN:NET=2,LATA=25,SDN1= “5550000”,SDN2=”5550031”,DEVCODE=”[102.102.102.102]”,DEVSTYLE=3,ATTRMOD=1,TYPE=”1”&”2”&”3”,PORTID=1,ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5”;

Meaning: Creates users from No. 5550000 to No. 5550031 configured with the device type 3 and user template 1. The following services are registered: call forwarding on busy, call forwarding on no reply, three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. No. 1 port of the gateway is occupied. On the SS, add a node configured with domain name [102.102.102.102], MGCP domain name certification, MGCP protocol, and node device type 3.

CREATE_XML_SDN:NET=2,LATA=25,SDN1= “5550000”,SDN2=”5550031”,DEVCODE=” MAC:00:B0:D0:8F:D0:F0”,DEVSTYLE=3,ATTRMOD=1,TYPE=”1”&”2”&”3”,PORTID=1,ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5”;

Meaning: Creates users from No. 5550000 to No. 5550031 configured with device type 3 and user template 1. The



following services are registered: call forwarding on busy, call forwarding on no reply, three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. No. 1 port of the gateway is occupied. On the SS, add a node configured with MAC address 00B0D08FD0F0, MAC address certification, H.248 protocol, and node device type 3.

5. Adding an AG subscriber without certification on the access gateway

CREATE_XML_SDN:NET=2,LATA=25,SDN1= “5550000”,SDN2=”5550031”, IPADDR=”102.102.102.102”,DEVSTYLE=5,ATTRMOD=1,TYPE=”1”&”2”&”3”,UNIT=1,SUBUNIT=1,CIRCUITNO=1,ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5”;

Meaning: Creates users from No. 5550000 to No. 5550031 whose IP address of the access gateway (AG) is 102.102.102.102, device type is 5, and user template is 1. The following services are registered: call forwarding on busy, call forwarding on no reply, three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. The No.1 circuit of the No.1 subunit, of the No. 1 unit, of the gateway, is occupied.

6. Adding an AG subscriber with the MGCP domain name certification on the access gateway

CREATE_XML_SDN:NET=2,LATA=25,SDN1=“5550000”,SDN2=”5550031”, DEVCODE=”[102.102.102.102]”,DEVSTYLE=5,ATTRMOD=1,TYPE=”1”&”2”&”3”,UNIT=1,SUBUNIT=1,CIRCUITNO=1,ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5”;

Meaning: Creates users from No. 5550000 to No. 5550031 whose IP domain name of the AG is [102.102.102.102], device type is 5, user template is 1. The following services are registered: call forwarding on busy, call forwarding on no reply, three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. The No.1 circuit of the No.1 subunit, of the No. 1 unit, of the gateway, is occupied.

7. Adding an AG subscriber with the MAC address certification on the access gateway

CREATE_XML_SDN:NET=2,LATA=25,SDN1= “5550000”,SDN2=”5550031”, DEVCODE=”MAC:00:B0:D0:8F:D0:F0”,DEVSTYLE=5,ATTRMOD=1,TYPE=”1”&”2”&”3”,UNIT=1,SUBUNIT=1,CIRCUITNO=1,ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5”;

Meaning: Creates users from No. 5550000 to No. 5550031 whose MAC address of the AG is 00B0D08FD0F0, device type



is 5, and user template is 1. The following services are registered: call forwarding on busy, call forwarding on no reply, three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. The No.1 circuit of the No.1 subunit, of the No. 1 unit, of the gateway, is occupied.

8. Adding IAD users when specifying GW node and TIDNAME, as well as using access GW in a non-certified way.

CREATE_XML_SDN:NET=2,LATA=25,SDN1= “5550000”,SDN2=”5550031”,IPADDR=”102.102.102.102”,DEVSTYLE=3,ATTRMOD=1,TYPE=”1”&”2”&”3”, ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5” , NODEID=500,NAME="USER001002003004";

Meaning: Creates users from No. 5550000 to 5550031 whose IP address of access GW (IAD) is 102.102.102.102, device type is 3, and the user template is 1. The following services are registered: call forwarding on busy, call forwarding on no reply, three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call. In addition, GW node is 500, and TID name is USER001002003004.



Error Code

Error Information Meaning

0x1AA9

The device code or the IP address, at least one of them should be entered.

The device number or the IP address, at least one of them should be entered.

0x1A2BUsers do not belong to the same office code

Office codes of the start user and the end user are not consistent with each other.

0x1A1BThe hundreds groups are not created. Please create them first.

The hundreds groups in which the user is located are not created. Or they are already created, but the gateway cluster of the hundreds groups is 0.

0x1AAE

Subscriber Digit Numbers (SDN) are not in the same gateway cluster.

The gateway cluster numbers of the hundreds groups in which the start user and the end user are located are not consistent.

0x1A7BSubscriber Digit Number (SDN) is already assigned.

The subscriber digit number is already occupied.

0x1A93There is no TID information of this port.

No device type information matches with the parameter DEVSTYLE.

0x1A26The MAC address is wrongly entered.

The MAC address is wrongly entered.

0x1A77Protocol type of the node is not MGCP or H.248.

If only the domain name is entered (ordinary domain name format) without the IP address, the device type and protocol type of the node should be the MGCP protocol. If only the domain name is entered (MAC address format) without the IP address, the device type and protocol type of the node should be the H.248 protocol.

0x1A1C

Gateway cluster of the node is not consistent with that of the hundreds numbers.

Gateway cluster of the node is not consistent with that of the hundreds numbers.

0x1A2DThe IP address is already assigned.

The IP address is already occupied by other nodes. The domain name of the node is not consistent with what you have entered.

0x1A94 The current gateway type is not consistent with the old one.

The entered device type is not consistent with that of the specified node or the protocol


Error Code Meaning


Error Code


type of the entered device type is not consistent with that of the specified node.

0x1A92This gateway has no such a port.

The entered port number exceeds the maximum port number of the device.

0x1AA7The ports of the TID user are insufficient.

The sum of the entered port number for the subscription in batch and the amount of subscriptions is bigger than the maximum port number of the device.

0x1A3FThe gateway device code already exists.

On the SS, there is no the entered IP address, but the domain name of a node is the same as the entered IP address.

0x1A33The node (NODEID) does not exist.

There is no node under the gateway cluster of the hundreds groups to which the user belongs.

0x1AADThe terminal domain name already exists.

The terminal domain name already exists (with regard to the H.323 user)

0x1A96The authority template does not exist.

The user template does not exist. Be care of that your user template number, the network type of the subscription user, area code, and the protocol type of the selected device type should be consistent with those of the user template on the SS.

0x1A32 DAS does not existDAS on the gateway cluster does not exist.

0x1A1AThe specified restriction type conflicts with the existing one.

There is the service conflict. Refer to the description of service conflicts in national standards.

0x1A80

“Do Not Disturb” service and “Do Not Disturb in a certain time” service can not be applied at the same time.


0x1A41Hotline service is already registered.

Hotline service is already registered.



Error Code


0x1A4B

Call forwarding conflicts with out-group call forwarding. They cannot be registered at the same time.


0x1A4FThere is the service conflict.

The secretary services cannot coexist with the forwarding services.

0x1A15The specified record does not exist.

The specified digit process template does not exist.

0x1A17 It is an unreasonable parameter.

The node ID exists.

SIP User Subscription Command (4190)

CREATE_SIPUSER:NET=?,LATA=?,SDN1=?,SDN2=?,ATTRMOD=?,TYPE=?,ENRIGHTO=?,ENRIGHTI=?,AHREALM=?, PASSWD=?

This command is used to complete the SIP user subscription function (SIP users do not need to access the gateway). When a subscriber is defined, both call authority and type of service you wish to register can be customized.

SN Type Name Description Range Selection

1 INT\BYTE NET Network type 0-32 Mandatory

2 INT\WORD LATALocal access and transport area code

0-65535 Mandatory

3STR\KEYBOARD

SDN1 Start number 2-40 Mandatory

4STR\KEYBOARD


5 INT\WORDATTRMOD

User template number

0-65535 Optional

6 STR\STRING TYPE Service type 0-5 Optional

7 STR\STRINGENRIGHTO


0-5 Optional

8 STR\STRINGENRIGHTI

Activated incoming call authority type

0-5 Optional

9 STR\STRINGAHREALM

Certification domain

0-32 Optional

10 STR\STRINGPASSWD

Password 0-32 Optional


Format Function Parameters



11 INT\BYTE SMS SMS authority 0-1 Optional

12 STR\STRING URLSubscriber account

0-64 Optional

13 INT\WORDNODEID

Subscriber node

0-65535 Optional

14 INT\WORD DAS Digit analyzer 0-65535 Optional

15 INT\BYTEPORTTYPE

Type of carried number

0-2 Optional

16STR\KEYBOARD

NPCarried number

0-40 Optional

17 INT\BYTE TS

To use/Not use the service at terminal side

0-1 Optional

18 INT\BYTE WIMAXMarking of the WIMAX subscriber

0-1 Optional

19 STR\STRINGAREAINFO


0-8 Optional

20 INT\WORD AREA Area code 0-65535 Optional

21 INT\BYTE SIP302

To allow/Not allow the terminal processing SIP 302 messages

0-1 Optional

Note: for all the above parameters, no default values.

The detailed description of parameters NET, LATA, SDN1, SDN2, TYPE, ENRIGHTO and ENRIGHTI are the same as those of the 4210 command.

ATTRMOD represents the user template number. The user template number represents the collection of the basic attributes of the user, including the call authority template, subscriber billing category and terminal property etc. For ATTRMOD, if the template is used when the subscriber is created, the digit analyzer of the subscriber template is used. If the template is not used or the digit analyzer is not configured in the template, the subscriber of the gateway cluster is used.

AHREALM represents the certification domain name of the SIP user, which can be customized.

PASSWD represents the password of SIP user account.

SMS (for the SMS authority) is an optional parameter, which is added when the SMS function exists. 1 indicates the SMS authority exists, while 0 indicates not.




URL (for the subscriber account) is an optional parameter, which is used according to the customer. When the 4190 command is sent, if URL is not configured, the SIP user account of the SS is automatically created based on other customer care system commands, as well as SS data configuration. The URL format is sip: 0+”Area Code”+”Subscriber Digit Number”@”the IP address of the SS”. If URL corresponds to the SIP account when it is to be configured, the account is not created automatically. If the customer needs to write the account itself, or the format of the automatically–created account does not satisfy the customer’s requirements, URL is adopted.

NODEID (for the subscriber node) is an optional parameter, which is not a necessary one. NODEID is added if the subscriber is configured to the SS-specified node, considering the customer’s special requirements. When the 4190 command is sent, if the parameter does not exist, system selects a node automatically based on SS data configuration; otherwise, the node ID is selected for configuration.

DAS ranks the top priority if used to specify the digit analyzer of the user. In other words, DAS is used as the digit analyzer of the user if above 0, no matter how USEMODDAS is used.

PORTTYPE represents the type of the carried number. NP is the carried number. PORTTYPE=1-PORT IN represents NP must be entered. Otherwise, there is no need to enter NP.

TS is used to decide the use of the services at terminal side.

WIMAX=0 indicates the non-WIMAX subscriber, and 1 indicates the WIMAX subscriber.

AREAINFO, the information regarding the area the WIMAX subscriber is located at, is used to search related module number in the roaming registration attribute module.

AREA, the area code used to distinguish subscriber templates, is meaningless.

SIP302 is used to allow the terminal processing SIP 302 messages. If the terminal is allowed to process the SIP 302 messages, meanwhile, it is necessary to select services at the terminal side. SIP302=0 indicates the terminal is not allowed, and 1 indicates the terminal is allowed.

1. Adding a SIP User

CREATE_SIPUSER:NET=2,LATA=25,SDN1=“5550000”,SDN2=”5550031”,ATTRMOD=1,TYPE=”1”&”2”&”3” ,ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5”,AHREALM=”ZTESS”, PASSWD=”12345678”;

Meaning: Creates users from No. 5550000 to No. 5550031 with user template 1. The following services are registered: call forwarding on busy, call forwarding on no reply, three-party service. The following authorities are granted: outgoing rural call, national toll call, forwarding to the information console, incoming international toll call, trunk outgoing from


Example


SS local call, trunk outgoing SS rural call. The certification domain is ZTESS and the account password is 12345678.

Error Code


0x1A96Authority template does not exist

The user template does not exist. Be care of that your user template number, the network type of the subscription user, area code, and the protocol type of the selected device type should be consistent with those of the user template on the SS.

0x1A2BUsers do not belong to the same office code


0x1A1B

The hundreds numbers are not created. Create them first.

The hundreds numbers where the user belongs to are not created. Or the hundreds numbers are already created, but the gateway cluster of the hundreds numbers is 0.

0x1AAEUser numbers are not in the same gateway cluster.

The gateway cluster numbers of start user and end user are not consistent with each other.

0x1A7BSubscriber Digit number (SDN) is already assigned

The Subscriber Digit number is already occupied.

0x1A32 DAS does not exist.DAS is not assigned to the gateway cluster of the hundreds numbers where the user number belongs to.


There is no node under the gateway cluster of the hundreds numbers where the user belongs to.

0x1A20Office code does not exist.

Office code does not exist.

0x1A1A

The specified restriction type conflicts with the existing one.

There is the service conflict. Refer to the description of service conflicts in national standards.

0x1A80





0x1A4B Call forwarding conflicts with out-group call forwarding. They



Error Code Meaning


Error Code


cannot be registered at the same time.


The secretary services cannot coexist with the forwarding services.

0x1A14A same record already exists.

The entered URL parameter already exists.

User Deletion Command (4206)

DELETE_SDN:NET=?,LATA=?,SDN1=?,SDN2=?TAG=?,NODEID=?;

If users are deleted, all data related to users are deleted. Batch deletion of users is supported.

SN Type NameDescription

Range Selection

1 INT\BYTE NETNetwork type

0-32Mandatory


Mandatory

3 STR\KEYBOARD SDN1Start number

2-40Mandatory

4 STR\KEYBOARD SDN2 End number 0-40 Optional

5 INT\BYTE TAG Tag 0-1 Optional

6 INT\WORD NODEIDGateway node

0-65535

Optional


Deleting users in batch is supported.

The detailed descriptions of parameters NET, LATA are the same as those of the 4210 command.

SDN1 and SDN2 represent start telephone number and end telephone number respectively. SDN2 is used only when the deletion is performed in batch.

For TAG, 0 indicates the deletion of the node, while 1 indicates not.

NODEID, an optional parameter, indicates the node ID of the gateway.

1. Deleting Users in Batch

DELETE_SDN:NET=2,LATA=25,SDN1=“5550000”,SDN2=”5550031”;


Format Function Parameters Parameter Description

ExampleExamples


Meaning: Deletes users from No. 5550000 to No. 5550031. If there are no users or TIDs under the node of the user, and the node type is IAD, the node is deleted at the same time.

2. Deleting a user

DELETE_SDN: NET=2, LATA=25, SDN1= “5550000”;

Meaning: Deletes the user No. 5550000. If there are no users or TIDs under the node of the user, and the node type is IAD, the node is deleted at the same time.

Error Code


0x1A1D Please enter user numbers with the same lengths.

The length of start number is not consistent with that of the end number.

0x1A1F The data requested by the command is too large.

There are over 1000 records between the start number and the end number.

0x1A15 The specified record does not exist.

The user does not exist.

0x1A5A This number is in the group. Delete the group prior to the user.

The user is a group user that cannot be directly deleted.

0x1A8D This number is the virtual conference access code.

This number is the virtual conference access code.

0x1A8F This number is the standard attendant console desk number.

This number belongs to an attendant console user.

0x1A17 The parameter value is not reasonable.

The ISDN user cannot be deleted.

User Suspension Command (4209)

DISABLE _SDN:NET=?,LATA=?,SDN1=?, SDN2=?,TAG=?;

This command is used to suspend the user.



0-32Mandatory

2 INT\WORD LATA

Local access and transport area code

0-65535

Mandatory


Error Code Meaning





2-40Mandatory


5 INT\BYTE TAGSuspension mode

0-2 Optional



SDN1 and SDN2 represent start telephone number and end telephone number respectively. SDN2 is used only when the suspension is performed in batch.

TAG=0, 1, 2. Here, 0, 1, and 2 indicate the full suspension, incoming suspension, and outgoing suspension respectively.

1. Making the user in full suspension

DISABLE _SDN: NET =1, LATA =25, SDN1="8880000", SDN2="8880999", TAG =0;

Meaning: Users from No. 8880000 to No. 8880999 are in full suspension.

2. Making the user in partial suspension

DISABLE _SDN: NET =1, LATA =25, SDN1="8880000", SDN2="8880999", TAG =1;

Meaning: Users from No. 8880000 to No. 8880999 are in incoming suspension, only enjoying the outgoing service.

Error Code


0x1A1DPlease enter user numbers with the same lengths.




0x1A2BUsers do not belong to the same office code.




Service Access Command (4208)

ENABLE _SDN:NET=?,LATA=?,SDN1=?, SDN2=?,TAG=?;

This command is used for users to access the services.


1 INT\BYTE NET Network 0-32 Mandator



Example Error Code Meaning

Format FunctionParameters



type y


Mandatory


2-40Mandatory


5 INT\BYTE TAGService access mode

0-2 Optional



SDN1 and SDN2 represent start telephone number and end telephone number respectively. SDN2 is used only when the service access is performed in batch.

TAG=0, 1, 2 Here, 0, 1, and 2 indicate the full service access, incoming service access, and outgoing service access respectively.

1. Making the user access full service

ENABLE _SDN: NET =1, LATA =25, SDN1="8880000", SDN2="8880999", TAG =0;

Meaning: Makes users from No. 8880000 to No. 8880999 access full service.

2. Making the user access partial service

ENABLE _SDN: NET =1, LATA =25, SDN1="8880000", SDN2="8880999", TAG =1;

Meaning: Users from No. 8880000 to No. 8880999 are in outgoing suspension, only enjoying the incoming service.

Error Code


0x1A1DEnter user number with the same length.












User Call Authority Modification Command (4204)

MODIFY_SUB_RIGHT:NET=?,LATA=?SDN1=?SDN2=?,ENRIGHTO=?, DISRIGHTO=?,,ENRIGHTI=?, DISRIGHTI=?;

This command is used to modify the call authority of users.


Selection



0-65535

Mandatory

3STR\KEYBOARD


4STR\KEYBOARD




0-5 Optional

6 STR\STRING ENRIGHTIActivated incoming call authority type

0-5 Optional

7 STR\STRINGDISRIGHTO

Deactivated outgoing call authority type

0-5 Optional

8 STR\STRING DISRIGHTIDeactivated incoming call authority type

0-5 Optional


ENRIGHTO, DISRIGHTO, ENRIGHTI, and DISRIGHTI indicate “with outgoing call authority”, “without outgoing call authority”, “with incoming call authority” and “without incoming call authority” respectively. Refer to Appendix for their meanings.


SDN1 and SDN2 represent start telephone number and end telephone number respectively. SDN2 is used only when the modification is performed in batch.

This command cannot guarantee the restoration of the call authority template used before. For instance, if the old call authority template is 1, execute ET=1, LATA=25, SDN1="8880000", SDN2="8880999", DISRIGHTO




="1"&"2"&"12". After the execution of the command, the call authority template is changed to 6. At this moment, if you execute NET=1, LATA=25, SDN1="8880000", SDN2="8880999", DISRIGHTO="1"&"2"&"12", the call authority template cannot always be changed back to 1.

1. Modifying user call authority

4204: NET =1, LATA =25, SDN1="8880000", SDN2="8880999", DISRIGHTO ="1"&"2"&"12";

Meaning: Modifies the call authority of users No.8880000 to No.8880999 to make them have no authorities to perform suburban and rural call of the local SS, domestic toll of the local SS, and high charge outgoing call.

Error Code










Owe Fee Service Access/Suspension Command (4202)

MODIFY_SUB_ATTR:NET=?,LATA=?,SDN1=?,SDN2=?,DISTAG=?,ENTAG=?ENPBXTAG=?,DISPBXTAG=?;

This command is used to change the user attributes of owe fee, service access, suspension.

SN Type Name Description RangeSelection



0-65535

Mandatory

3STR\KEYBOARD


4 STR\ SDN2 End number 0-40 Optional





SN Type Name Description RangeSelection


KEYBOARD

5 ENUM DISTAGDisable other attributes of the user

0-32 Optional

6 ENUM ENTAGEnable other attributes of the user

0-32 Optional

7 ENUMENPBXTAG

Enable other attributes of the user group

0-32 Optional

8 ENUMDISPBXTAG

Disable other attributes of the user group

0-32 Optional



SDN1 and SDN2 represent start telephone number and end telephone number respectively. SDN2 is used only when the owe fee serve access/suspension is performed in batch.

DISTAG and ENTAG both indicate whether the user has the owe fee attribute. DISTAG=4 indicates the owe fee attribute is cancelled, while ENTAG=4 indicates the owe fee attribute is added.

ENPBXTAG and DISPBXTAG, indicate whether the user has the attributes of service access and suspension. ENPABTAG=5&6 indicates the user could not enjoy any incoming & outgoing service. DISPBXTAG=5&6 indicates the user could enjoy full incoming & outgoing service.

1. Owe fee

MODIFY_SUB_ATTR: NET=1, LATA=758, SDN1="8880000", SDN2="8880000", ENTAG=4;

Meaning: No.8880000 user is in owe fee.

2. Owe fee service access

MODIFY_SUB_ATTR: NET=1, LATA=758, SDN1="8880000", SDN2="8880000", DISTAG=4;

Meaning: Service for No.8880000 user resumes.

3. Owing fee full suspension

4202: NET=1, LATA=758, SDN1="8880000", SDN2="8880000", ENTAG=4, ENPBXTAG=5&6

Meaning: Owing fee full suspension happens to user No.8880000. Both outgoing and incoming calls cannot be performed.

4. Resuming from owing fee full suspension



Example


4202:NET=1,LATA=758,SDN1="8880000",SDN2="8880000",DISTAG=4,DISPBXTAG=5&6;

Meaning: User No.8880000 cancels owing fee full suspension.

Error Code










Number Change Command (4202)

MODIFY_SUB_ATTR:NET=?,LATA=?,SDN1=?,SDN2=?,OUTINTAG=?,CHGSDN=?,EXPIRE=?,TONESW=?;

This command is used to change the telephone number of a user. The change covers “Play announcement due to the telephone number change”, “Do not play announcement when the number changes”, “Changed to be a local user” and “Changed to be a non-local user.”


1INT\BYTE

NET Network type 0-32 Mandatory

2INT\WORD

LATALocal access and transport area code

0-65535 Mandatory

3STR\KEYBOARD

SDN1 Start number 2-40 Mandatory

4STR\KEYBOARD


5INT\BYTE

OUTINTAG

Number change flag

0-4 Optional

6STR\KEYBOARD

CHGSDNNumber after change

0-41 Optional


Error Code Meaning




7STR\STRING

EXPIRENumber change expiration date

3-11 Optional

8INT\BYTE

TONESW

Announcement play switch due to number change

0-2 Optional



SDN1 and SDN2 represent start telephone number and end telephone number respectively. SDN2 is used only when the number of change is performed in batch.

OUTINTAG is the tag of number change. OUTINTAG=4 indicates the number is changed.

CHGSDN indicates the number after change.

EXPIRE indicates the expiration date for number change. Its format is YYYY-MM-DD. After a user successfully changes his number before the expiration date, another user dialing the old number hears the announcement or the busy tone. If the user dials the changed number after the expiration date, the announcement of the number change is not played.

TONESW is the switch to play the announcement for the number change. TONESW=1/0 indicates the announcement is played or not if the user is changed within the local office. TONESW=2 indicates the announcement is played if the user is changed to under another office.

1. Changing number to be a local user with announcement played

MODIFY_SUB_ATTR:NET=1,LATA=25,SDN1="5550899",SDN2="5550899",OUTINTAG=4,CHGSDN="5550001",EXPIRE="2006-08-09",TONESW=1;

Meaning: It indicates that the user number 5550899 is changed to 5550001 of the local office. The number change expiration date is Aug 9th, 2006.

2. Changing number to be a non-local user with announcement played

MODIFY_SUB_ATTR: NET=1, LATA=25, SDN1="5550899", OUTINTAG=4, CHGSDN="5550001", EXPIRE="2006-08-09", TONESW=2;

Meaning: It indicates that the user number 5550899 is changed to 5550001 of the non-local office. The number change expiration date is Aug 9th, 2006.

3. Changing number to be a local user without announcement played

MODIFY_SUB_ATTR: NET=1, LATA=25, SDN1="5550999", SDN2="5550999", OUTINTAG=4, CHGSDN="5550002", TONESW=0;



Example


Meaning: It indicates that the user number 5550899 is changed to 5550002 of the local office.

Error Code


0x1A1DPlease enter user numbers with the same length.








0x1ABBPlease enter the valid date

The date format of the number change is wrong. The format must be YYYY-MM-DD.

0x1A65The user number (SDN) does not exist.

The new number after the number change does not exist.

Announcement Play Record Deletion Command (4054)

DELETE_CHANGE_SUB: SDN=? LATA=? NET=? ;

This command is used to delete the announcement record of a user.



0-32Mandatory

2 INT\WORD LATA


0-65535

Mandatory

3 STR\KEYBOARD SDNSubscriber digit number

2-40Mandatory



SDN indicates the subscriber number.

DELETE_CHANGE_SUB: SDN="52870009", LATA=25, NET=2;


Error Code Meaning


Example


Meaning: Deletes the announcement play record of the user number 52870009.

Error Code

Error Information

Meaning


The announcement record of the user does not exist.



Not Ready for Service Command (4202)

MODIFY_SUB_ATTR: NET=?,LATA=?,SDN1=?,SDN2=? ENTAG=?, DISTAG=?;

This command is used to make the user not ready for service.


Range Selection


0-32Mandatory

2 INT\WORD LATA


0-65535

Mandatory


2-40Mandatory


5 ENUM ENTAGNot ready for service tag

0-16 Optional

6 ENUM DISTAGReady for service tag

Optional



SDN1 indicates the start number. Only SDN1 is used for a single user. SDN2 indicated the end number.

ENTAG and DISTAG indicate whether the user is in service access state. ENAG=8 indicates the service is opened, while ENTAG=8 indicates the service is not opened.

1. Enabling a User to the Not Ready for Service State


Error Code Meaning


Example


MODIFY_SUB_ATTR:NET=1,LATA=25,SDN1="5550899",SDN2="5550899", ENTAG=8;

Meaning: Enables the user 5550899 to the Not Ready for Service state.

2. Canceling the Not Ready for Service State

MODIFY_SUB_ATTR:NET=1,LATA=25,SDN1="5550899",SDN2="5550899", DISTAG=8;

Meaning: Cancels the Not Ready for Service state of user 5550899.

Error Code














Public Telephone Billing Command (4202)

MODIFY_SUB_ATTR:NET=?,LATA=?,SDN1=?,SDN2=?, REVKC=?;

This command is used to register/cancel the polarity reversal or the 16KC billing of a user.



0-32Mandatory


Mandatory


2-40Mandatory



Error Code Meaning




5 INT\BYTE REVKCSignal type provided by the terminal

0-4 Optional



SDN1 and SDN2 represent start telephone number and end telephone number respectively. SDN2 is used only for batch users.

RVKC indicates the signal types provided by the terminal. REVKC=0 indicates both the polarity reversal signal and the 16KC pulse signal are not provided. REVKC=1 indicates only the polarity reversal signal is provided, excluding the 16KC pulse signal. REVKC=2 indicates only the 16KC pulse signal is provided, excluding the polarity reversal signal. REVKC=3 indicates both the polarity reversal signal and the 16KC pulse signal are provided.

1. Registering the polarity reversal function of a user

MODIFY_SUB_ATTR:NET=1,LATA=25,SDN1="5550899",SDN2="5550899", REVKC =1;

Meaning: Registers the polarity reversal function of user number 5550899.

2. Canceling the polarity reversal function of a user


Meaning: Cancels the polarity reversal function of user number 5550899.

3. Registering 16KC Function of a User


Meaning: Registers the 16KC function of user number 5550899.

4. Canceling 16KC function of a user


Meaning: Cancels the 16KC function of user number 5550899.

Error Code










Error Code






Call Restriction Group Modification Command (4202)

MODIFY_SUB_ATTR: NET=?, LATA=?,SDN1=?,SDN2=?, RCLGROUP=?;

This command is used to modify the call restriction group of a user.


Range

Selection


0-32Mandatory

2 INT\WORD LATA


0-65535

Mandatory


2-40Mandatory


5 INT\WORD RCLGROUPRestriction group number

0-65535

Optional




RCLGROUP indicates the restriction group number.

1. Modifying the restriction group of the user

MODIFY_SUB_ATTR:NET=1,LATA=25,SDN1="5550899",SDN2="5550899",RCLGROUP =10;

Meaning: Modifies the call restriction group of the user 5550899 to 10.

Error Code


0x1A1D Please enter user numbers with the

The length of start number is not consistent with that of the end



ExampleError Code Meaning


Error Code


same lengths. number.











Commercial Group User Addition Command (4233)

APPEND_CTX_USER:CSGNO=?,CDN=?,SDN=?,NET=?,DAS=?,LATA=?,NUM=?;

This command is used to add an ordinary user to a group.


Range Selection


0-32Mandatory

2 INT\WORD LATA


0-65535

Mandatory

3 STR\KEYBOARD SDNStart number

2-40Mandatory

4 STR\KEYBOARD CDNGroup numbers

1-10Mandatory

5 INT\ WORD CSGNOGroup number

0-65535

Mandatory

6 INT\WORD DAS DAS0-65535

Optional

7 STR\STRING NUMNumber to add

1-65535

Mandatory

Note: for all the above parameters except NO.7, no default values. The default value of No.7 is 1.


SDN represents the start telephone number




CDN is the group number.

CSGNO is the code of the group.

DAS is the digit analyzer.

NUM is the number of users in the group.

1. Adding an ordinary user to a group

APPEND_CTX_USER:CSGNO=100,CDN="4101",SDN="4826607",NET=1,LATA=25,DAS=1, NUM=1;

Meaning: Adds a user for the No.100 CENTREX group. The intra-group number is 4101 and the user number is 4826607.

2. Adding two ordinary users to a group

APPEND_CTX_USER: CSGNO=100,NET=1,CDN="4102",SDN="4826608",DAS=1,NUM=2;

Meaning: Adds two consecutive users for the No.100 CENTREX group. The user numbers are 4826608 and 4826609.

Error Code








0x1A65The Subscriber Digit Number (SDN) does not exist.

The Subscriber Digit Number does not exist.

Commercial Group User Deletion Command (4234)

DELETE_CTX_USER: CSGNO=?, CDN1=?,CDN2=?,SET=?;

This command is used to change the group user to the ordinary user.


Range Selection

1 STR\KEYBOARD CDN2Start number

1-10Mandatory

2 STR\KEYBOARD CDN1 Group 1-10 Mandator






Range Selection

numbers y

3 INT\ WORD CSGNOGroup number

0-65535

Mandatory

4 INT\ BYTE SETIntra-group number

0-255

Optional

(Its default value is 0.)

None

1. Deleting the ordinary user from the group user

DELETE_CTX_USER: CSGNO=100, CDN1=4101, CDN2=4110;

Meaning: Deletes intra-group users whose intra-group number is 0, and numbers rang from 4101 to 4110 from the No.100 CENTREX group.

Error Code



The length of the start number is not consistent with that of the end number.

0x1A16The input parameter range is unreasonable.

The start group number exceeds the end group number.

0x1A72The user group does not exist.

The user group does not exist.


The intra-group subscriber does not exist.

Ordinary User to ISDN User Conversion Command (4272)

CREATE_ISUB:NET=?,LATA=?,SDN1=?,DCHANNELS=?,TAG=?,UOSR=?,UOSA=?;

The premise to convert the ordinary user into an ISDN user is that the ordinary user is already successfully created, this user cannot register any service and TIDNAME needed by ISDN is also being created (BRA, PRI and RTP types).

SN

Type NameDescription

RangeDefault Value

Selection


0-32Mandatory






SN


RangeDefault Value

Selection

2INT\WORD

LATA


0-65535Mandatory

3STR\KEYBOARD

SDN1Start number

2-40Mandatory

4STR\KEYBOARD

SDN2End number

0-40 Optional

5INT\DWORD

UOSR

Booking indication of supplementary service

0-4294967295

0Mandatory

6INT\DWORD

UOSA

Activating indication of supplementary service

0-4294967295

0Mandatory

7INT\WORD

BSCFU

Call forwarding unconditional

0-65535 0Mandatory

8INT\WORD

BSCFB

Call forwarding on busy

0-65535 0Mandatory

9INT\WORD

BSCFNR

Call forwarding on no reply

0-65535 0Mandatory

10INT\WORD

STATUS

ISDN state

0-65535 0Mandatory

11INT\DWORD

TAGOther attributes

0-4294967295

0Mandatory

12INT\WORD

STATUS1

Circuit state

0-65535 0Mandatory

13INT\WORD

TAG1

Other attributes of the circuit

0-65535 0Mandatory

14 INT\WORD

DCHANNELS

Serial number

0-65535 Mandatory



SN


RangeDefault Value

Selection

of the D channel

15 INT\BYTEDTIDNO

Serial number reserved for the D channel

0-255Mandatory

16INT\DWORD

DNOGlobal D channel

0-4294967295

0Mandatory

Registration: UOSR=1 indicates CFU, UOSR=2 indicates CFB, and UOSR=4 indicates CFNR.

Activation: UOSA=1 indicates CFU, UOSA=2 indicates CFB, and UOSA=4 indicates CFNR.

Primary service category: 1-Voice service. 2-Unrestricted digital information, 4-3.1KHZ audio, 8-7KHZ telephone, 16-User telegraph, 32-Fourth fax, 64-videography, 128-Video phone, and 256-Second and third fax.

BSCFU, BSCFB, or BSCFNR, registering one or more primary services, is the sum of the primary services.

For instance: BSCFU=33 indicates that the voice and fourth fax are registered.

1. Converting an ordinary user into an ISDN user

CREATE_ISUB:NET=2,LATA=25,SDN1="2180003",DCHANNELS=4,TAG=0,UOSR=1,UOSA=0,BSCFU=0,BSCFB=0,BSCFNR=0,STATUS=0,STATUS1=0,TAG1=0,DNO=5,DTIDNO=1;

Meaning: Creates the No.2180002 ISDN user. The D channel of the user is 14, global channel is 6, and “Forwarding unconditional” service is registered.

Error Code




0x1A2BThe users do not belong to the same office code

The office code of the start user is not consistent with that of the end user.

0x1A20The office code does not exist.

The office code does not exist.

0x1A65The Subscriber Digit Number (SDN) does not exist.

The Subscriber Digit Number (SDN) does not exist.

0x1A14 The same record already exists.

It is an ISDN subscriber.

0x1A17 The parameter is not reasonable.

The number is a MSN/DDI sub-number, or the number has





Error Code


registered services.

ISDN User to Ordinary User Conversion Command (4274)

DELETE_ISUB:NET=?,LATA=?,SDN1=?, SDN2=?;

This command is used to delete the ISDN user and convert it into an ordinary user.



0-32Mandatory

2 INT\WORD LATA


0-65535

Mandatory


2-40Mandatory





1. Deleting Users in Batch

DELETE_ISUB:NET=2,LATA=25,SDN1="2180003",SDN2="2180013";

Meaning: Deleting No. 2180003 to No.2180013 ISDN users.

Error Code




0x1A5AThe intra-group number should not be deleted.

The subscriber number is already used by the CTX group.

Ordinary Service Registration Command (4302)





REG_NEWSRV:NET=?,LATA=?,SDN1=?,TYPE=?;

This command can be used for users to register more than one supplementary service.



0-32Mandatory

2 INT\WORD LATA


0-65535

Mandatory


2-40Mandatory


5 STR\STRING TYPE Service type 2-5Mandatory




TYPE, enumeration value of the service type of the user, is a multi-instance parameter. For more details, please refer to Appendix.

1. Registering a service

REG_NEWSRV:NET=1,LATA=25,SDN1="4826606",TYPE="12"&"13";

Meaning: Register the abbreviated dialing and hotline services for the No.4826606 user.

Error Code




0x1A1FThe data volume requested by the command is too large.

The number of the subscribers requested by the command exceeds 1000.


The subscriber number does not exist.

0x1A3B The input multi-instance has illegal parameters.

The service enumeration is not defined.


Format Function Parameters Parameter DescriptionParameter

Description



Error Code


0x1A1A The specified restriction type conflicts with the existing one.

The specified restriction type conflicts with the existing one.

0x1A80 “Do Not Disturb” service and “Do Not Disturb in a certain time” service can not be applied at the same time.




0x1A4B




There is the service conflict.

0x1A19 The supplementary service is not subscribed.

The password service is not registered.

0x1A3D A kind of hotline service is already registered.

Only the immediate hotline or delay hotline could be registered.

0x1A40 Restriction all outgoing calls is already registered.

Restriction all outgoing calls is already registered.


The parameter value is not reasonable.

Ordinary Service Deletion Command (4303)

DELETE_NEWSRV: NET=?, LATA=?,SDN1=?,TYPE=?;

This command can be used to delete more than one supplementary service.



0-32Mandatory

2 INT\WORD LATA


0-65535

Mandatory


2-40Mandatory


5 STR\STRING TYPE Service type 2-5 Mandator





y




TYPE, enumeration value of the service type of the user, is a multi-instance parameter. For more details, please refer to Appendix.

1. Deleting a Service

DELETE _NEWSRV: NET=1, LATA=25, SDN1="4826606", TYPE="12"&"13";

Meaning: Delete the abbreviated dialing and hotline services of 4826606 user number.

Error Code




0x1A1FThe data volume requested by the command is too large.

The number of the subscribers requested by the command exceeds 1000.


The subscriber number does not exist.


The parameter value is not reasonable.

0x1AFC Use DELETE_VCONF (4329) command to delete data of subscriber services first.

Use DELETE_VCONF (4329) command to delete data of subscriber services first.

0x1B23 The subscriber has registered the service of activation secretary system in the Centrex.

The subscriber has registered the service of activation secretary system in the Centrex.

MSN/DDI Service of ISDN User Creation Command (7324)

CREATE_MSN/DDI:SUBNUM=?,NUM=?,FLAG=?,NET=?,LATA=?;

This command is used to create the MSN (Multiple Subscriber Number)/DDI (Direct Dial In) service for the ISDN user.







1 STR\STRING SUBNUM Sub-number 2-41Mandatory

2 STR\STRING NUMDefault number

2-32Mandatory

3 INT\BYTE FLAG Service type 1-2Mandatory


0-32 Optional

5 INT\WORD LATA


0-65535

Optional



For SUBNUM, a subscriber could keep not only the fixed number allocated by the carrier, but also the sub-numbers. The subscriber could allocate the sub-numbers to different terminals, and make the related terminals ring.

NUM represents the fixed number allocated by the carrier.

FLAG=1 indicates MSN service, i.e., the multi-subscriber number service. The service could allocate multiple numbers to the subscriber line. Then, the subscriber allocates different numbers to different terminals. Relate terminal rings for an incoming call. FLAG=2 indicates DDI service, i.e., Direct Dial In service. The service allows the subscriber originates a direct call to ISPBX (the subscriber switch with integrated service capability) or other subscribers in an exclusive system without the help of the operator.

1. Registering MSN Service

CREATE_MSN/DDI:SUBNUM="52870000", NUM="52870001", FLAG=1, NET=0, LATA=25;

Meaning: Registers the MSN service for user No. 4826606. The sub-number is 52870000, while the default number is NUM="52870001".

Error Code


0x1A19The supplementary service is not subscribed.

The main number is a non-ISDN subscriber.

0x1A2BSubscribers do not belong to the same office code.

The office code of the start subscriber is not consistent with that of the end subscriber.





Error Code


0x1A1B The hundreds group is not created. Please create it first.

The hundreds group in which the subscriber is located is not created. Or the hundreds group is already created, but its gateway cluster is 0.

0x1A14 The same record already exists.

The sub-number already exists.

0x1A65 The Subscriber Digit Number (SDN) does not exist.

The main number does not exist.

0x1A20 The office code does not exist.


0x1A19 The supplementary service is not subscribed.

The main number does not register MSN/ISDN service.

0x1A39 The limit of the capacity is exceeded.

The MSN/DDI sub-number exceeds the limit of the maximum capacity.

MSN/DDI Service of ISDN User Deletion Command (7326)

DELETE_MSN/DDI: SUBNUM=?, NET=?,LATA=?;

This command is used to delete the MSN/DDI service of the ISDN user.


1 STR\STRING SUBNUM Sub-number 2-41Mandatory


0-32 Optional

3 INT\WORD LATA


0-65535

Optional



For SUBNUM, a subscriber could keep not only the fixed number allocated by the carrier, but also the sub-numbers. The subscriber could allocate the sub-numbers to different terminals, and make the related terminals ring.

1. Deleting MSN Service

DELETE_MSN/DDI: SUBNUM="52870000", NET=0, LATA=0;



Example


Meaning: Delete the MSN service with sub-number as 52870000.

Error Code



The MSN/DDI sub-number does not exist.

0x1A5A

The number belongs to the Centrex. Please delete the Centrex before deletion of the subscriber.

The subscriber, belonging to a Centrex, could not be deleted directly.


The number is not a MSN-DDI sub-number.

0x1A20 The office code does not exist.


Telephone Relocation Command (7289)

MOV_SDN:NET=?,LATA=?,SDN=?,LATA1=?,SDN1=?,TIDNAME=?,NODEID=?;

This command is used to complete the telephone removal (at present, this command is only used for ordinary user to remove the telephone)


Range

Selection


0-32Mandatory

2 INT\WORD LATA

Original local access and transport area code of the user

0-65535

Mandatory

3 STR\KEYBOARD SDNOriginal user number

2-40Mandatory

4 INT\WORD LATA1

Original local access and transport area code of the user

0-65535

Mandatory

5 STR\KEYBOARD SDN1 New user number

2-40 Mandatory


Error Code Meaning




Range

Selection

6 INT\ WORD TIDNAME TID name 0-40Mandatory

7 INT\WORD NODEID New node ID0-65535

Optional



SDN represents the old number of the subscriber, while SDN1 represents the new number after the subscriber relocates the telephone.

LATA1 represents the area code, i.e., the code of the region in which the new number is located.

TIDNAME represents the TIDNAME of the new port after the subscriber relocates the telephone.

NODEID represents the new node ID in which the new telephone is located after relocation.

Note: This old user should be listed in the switch. New user and new user TID information are not occupied in the switch. The old user will be deleted after the telephone removal.

1. Adding ordinary User to a Group

MOV_SDN:NET=1,LATA=25,SDN="52870001",LATA1=25,SDN1="52870002",TIDNAME="USER001002003";

Meaning: Removes user 52870001 to 52870002. TID name of the new port is USER001002003. The user node number keeps unchanged.

2. Relocating the telephone and changing the node

MOV_SDN:NET=1,LATA=25,SDN="52870001",LATA1=25,SDN1="52870002",TIDNAME="USER001002003", NODEID=12;

Meaning: Removes user 52870001 to 52870002. TID name of the new port is USER001002003. The user is removed to No.12 node.

Error Code


0x1A65User number (SDN) does not exist.

The original user number does not exist.


The office code of the new user number does not exist.

0x1A1B

Three digit numbers are not created. Create the three digit numbers first.

Three digit numbers of the new user number does not exist.

0x1A7BUser number (SDN) is already assigned

The user number is already occupied.





Error Code


0x1A6FTID user resources are already occupied.

The TID name of the user is already occupied.


The node (NODEID) does not exist.

0x1A17The parameter value is not reasonable.

The user type is not consistent with the node type.

Ordinary User to V5 User Conversion Command (4835)

CREATE_V5_SUB:USER=?,DID=?,SDN=?,LATA=?,NET=?,ADDR2=?,ADDR1=?,V5ID=?;

The premise to convert the ordinary user into a V5 user is that the ordinary user is already successfully created and TIDNAME needed by V5 user is also being created (TIDNAME that need to create the trunk type and RTP type). Moreover, the port information of V5 is already configured.


1 INT\BYTE V5IDParameters of the V5 interface

1-255Mandatory

2 INT\WORD ADDR1

Start address of the L3/EF address

0- 32767

Mandatory

3 INT\WORD ADDR2End address of the L3/EF address

0- 32767

Optional


0-32Mandatory

5 INT\WORD LATA


1-65535

Mandatory

6 STR\KEYBOARD SDN User number 2-40Mandatory

7 INT\WORD DID DID1-65535

Optional

8 INT\BYTE USER User type 1-3Mandatory


NET (Network type) is customized by the user. For instance, 1 indicates China Telecom. LATA (Local access and transport




area code) is area code. For instance, the area code of Nanjing is 25.

ADDR1 represents the start address of the L3/EF address, while ADDR2 represents the end address of the L3/EF address. For the L3 address, the access network allocates a protocol address to each subscriber port. The LE side allocates a telephone number to each protocol address. Then, V5.2 protocol could correlate the subscriber ports with telephone numbers by matching the protocol addresses at two sides. The protocol addresses are co-determined by MD and LE. For the EF address, it is equivalent to the L3 address of the ISDN subscriber. The envelop address of the ISDN subscriber is allocated to each subscriber port.

V5ID represents an identifier of the V5 user. The interface ID, the solo number of the interface V5.2 in the access network, is identified through the access network and the interface Q of the local switch.

USER indicates the user type. 1 indicates the 2B+D user, 2 indicates the 30B+D user, and 3 indicates the PSTN user.

DID represents a reserved parameter.

SDN represents the number of the ordinary subscriber.

1. Creating V5 Users in Batch

CREATE_V5_SUB:USER=3,DID=1,SDN="91090000",LATA=56,NET=0,ADDR2=1,ADDR1=0,V5ID=1;

Meaning: Creates a batch of V5 users. The identifier of the V5 interface is 1, the start address of the L3/EF address is 0, the end address of the L3/EF address is 1, network type is 0(current network), the area code is 56, the user numbers are 91090000 and 91090001, the user type is 3 (PSTN), and the DID is 1.

Error Code

Information Meaning

0x1AE6This V5 interface does not exist.

Information of the V5 interface is not configured.



0x1A14The same record already exists.

The created V5 subscriber already exists.

V5 User to Ordinary User Conversion Command (4837)

DELETE_V5_SUB: V5ID=?, ADDR1=?, ADDR2=?, USER=?;



Format


This command is used to convert the V5 user into an ordinary user.


1 INT\BYTE V5IDParameters of the V5 interface

1-255Mandatory

2 INT\WORD ADDR1Start address of the L3/EF address

0-32767 Optional

3 INT\WORD ADDR2End address of the L3/EF address

0-32767 Optional

4 INT\BYTE USER User type 1-3Mandatory





1. Deleting V5 Users Information in Batch

DELETE_V5_SUB: V5ID=1, ADDR1=22, ADDR2=77, USER=3;

Meaning: Deletes V5 PSTN users whose V5 interface is 1 and address is 22 through 77 in batch.

2. Deleting a Piece of V5 User Information

DELETE_V5_SUB: USER=3, ADDR1=0, V5ID=1;

Meaning: Deletes V5 PSTN user whose V5 interface is 1 and address is 0.

Error Code

Information Meaning

0x1A15 The specified record does not

V5 user does not exist.


Function Parameters Parameter Description



Error Code

Information Meaning

exist.

Modifying the Relationship between Telephone Number and TID (7283)

MODIFY_SUBTID:NET=?,LATA=?,SDN=?, TIDNAME=?,NODEID=?;

This command is used to modify the TID name, i.e., the physical port related to the number. The command is only effective for AG subscribers and IAD subscribers.


Range Selection


1-255 Optional

2 INT\WORD LATA Area code 0-65535 Optional


2-40Mandatory

4 STR\STRING TIDNAME TID name 0-40Mandatory

5 INT\DWORD NODEID Node ID1-2147483647

Optional



SDN represents the start telephone number.

NODEID represents the new node ID to which the telephone number belong after modification of the relationship.

1. Modifying the TID port of the subscriber

MODIFY_SUBTID:NET=1,LATA=25,SDN="52870001",TIDNAME="USER001002003";

Meaning: Modifies the physical port of the number 52870001 to under the port USER001002003 of the old gateway node.

2. Modifying the TID port of the subscriber across the node

MODIFY_SUBTID:NET=1,LATA=25,SDN="52870001", TIDNAME="USER001002003",NODEID=12;

Meaning: Modifies the physical port of the number 52870001 to under the port USER001002003 of the 12th gateway node.

Note: The node ID should be under the same gateway cluster as the node ID in which the subscriber used to locate.





Error Code

Information Meaning

0x1A65The Subscriber Digit Number does not exist.

The Subscriber Digit Number does not exist.

0x1A33The NODEID does not exist.

The NODEID does not exist.

0x1A6FThe TID subscriber resource is already occupied.

The TID port to be relocated is already used by a subscriber.

Creating V5 Number Allocation User (4848)

CREATE_V5_SDN:NET=?,LATA=?,SDN=?,ATTRMOD=?,TYPE=?,ENRIGHTO=?,ENRIGHTI=?,V5ID=?,ADDR1=?,ADDR2=?,DID=?,USER=?;

This command is used to realize customer care system of ordinary users and modify ordinary users to V5 users.


RangeSelection


0-32Mandatory


Mandatory


2-40Mandatory

4 INT\WORDATTRMOD

Subscriber template

1-65535

Optional

5 STR\STRING TYPE Service type 0-5 Optional


Activated outgoing-call authority type

0-5 Optional

7 STR\STRING ENRIGHTI

Activated incoming-call authority type

0-5 Optional

8 INT\BYTE V5ID

Interface parameters of interface V5

1-255Mandatory

9 INT\WORD ADDR1 Start address of L3/EF

0- 32767

Mandatory





RangeSelection

address

10 INT\WORD ADDR2End address of L3/EF address

0- 32767

Optional

11 INT\WORD DID DID1-65535

Optional

12 INT\BYTE USERSubscriber type

1-3Mandatory

13 INT\BYTEUSEMODDAS

To allow/Not allow the use of the user template digit analyzer

0-1 Optional

14 STR\STRINGAREAINFO


0-8 Optional

15 INT\WORD AREA Area code0-65535

Optional


For SDN, the PSTN subscriber corresponds to the L3 address, while the ISDN subscriber corresponds to the EF address.

ATTRMOD represents the user template number. The user template number represents the collection of the basic attributes of the user, including the call authority template, subscriber billing category, and terminal property, etc. The subscriber digit analyzer is acquired from the gateway cluster corresponding to the hundreds group, rather than from the subscriber template.

TYPE, enumerating values of the service types for users, represents a multi-instance parameter (refer to Appendix for its meaning). ENRIGHTO, the enumeration value with outgoing call authority, is also a multi-instance parameter (refer to Appendix for its meaning). ENRIGHTI, the enumeration value with incoming call authority, is also a multi-instance parameter. Both service type and call authority data are defined on the user template. If the data on the template cannot meet the special needs of users, these parameters are used to customize the service data or call authority data of users.






DID represents a reserved parameter.


USEMODDAS represents the use of the user template digit analyzer. USEMODDAS=0 represents no use, and 1 represents use.

AREAINFO, information regarding the area the WIMAX subscriber is located at, is used to search related module number in the roaming registration attribute template.

AREA, the area code used to distinguish user templates, is meaningless.

1. Creating V5 users in batch

CREATE_V5_SDN:NET=0,LATA=25,SDN=k'1230000,ATTRMOD=34,TYPE=”1”&”2”&”3”, ENRIGHTO=”1”&”2”&”7”,ENRIGHTI=”3”&”4”&”5” ,V5ID=1,ADDR1=0, ADDR2=1,DID=1,USER=3;

Meaning: Creates a batch of V5 users and ordinary users. If 1230000 and 1239991 ordinary users do not exist, the network type is created to 0 (current network), the area code is created to 25, and the user template is created to 34. After registration of users who enjoy the following services (call forwarding on busy, call forwarding on no reply, three-party service), as well as are granted with the following authorities (outgoing rural call, domestic toll call, forwarding to the information console, incoming international toll call, trunk outgoing from SS local call, trunk outgoing SS rural call), the interface V5 is created with the identification 1. At the same time, the start address of L3/EF address is created to 0, the end address of L3/EF address is created to 1, the network type (current network) is created to 1, the area code is created to 25, the subscriber numbers are created to 1230000 and 1230001, the subscriber type is created to 3 (PSTN), and the V5 subscriber whose DDN is 1 is created.

Error Code

Information Meaning

0x1AE6The interface V5 does not exist.

The information of interface V5 is not configured.




Error Code

Information Meaning




The V5 user already exists.

Modifying SIP User Password (7799)

MODIFY_PASSWORD: URL=, PASSWORD=, NEWPASSWORD=, NEWPASSWORD1=;

This command is used to modify the password of the SIP account.


RangeSelection


0-32 Optional


Optional


2-40 Optional

4 STR\STRING URLSIP user account

2-64 Optional

5 STR\STRINGPASSWORD

Current password

0-32Mandatory

6 STR\STRINGNEWPASSWORD

New password

0-32Mandatory

7 INT\BYTENEWPASSWORD1

New password confirmation

0-32Mandatory

The detailed descriptions of parameters NET, LATA are the same as those of the 4210 command. SDN is the subscriber number. For URL, its format is “sip subscriber number@ SS IP address”. For the above-mentioned four parameters, only URL or NET+LATA+SDN could be selected, and URL has a higher priority.

PASSWORD represents the current password.

NEWPASSWORD represents the password after modification of the old password.

NEWPASSWORD1 represents confirmation of the new password, which should be consistent with NEWPASSWORD.

1. Modifying SIP account password

MODIFY_PASSWORD:URL=”SIP:[email protected]”,PASSWORD=”1234”,NEWPASSWORD=”12345”, NEWPASSWORD1=”12345”;



Example


Meaning: Modifies the password of the SIP:[email protected] account from 1234 to 12345.

2. Modifying user password

MODIFY_PASSWORD:NET=1,LATA=25,SDN=”5278900”,PASSWORD=”1234”, NEWPASSWORD=”12345”, NEWPASSWORD1=”12345”;

Meaning: Modifies the password of the user 5278900 from 1234 to 12345.

Error Code

Information Meaning

0x1A15The specified record does not exist,

The subscriber or the account does not exist.


The old password is not correct or two new passwords are not same.

Creating Customer Care System Intelligent Subscription Service (7272)

CREATE_BOSSCSI:MODELNO=,NET=,LATA=,SDN1=,SDN2=;

This command is used to create the customer care system intelligent subscription services.


RangeSelection

1 INT\WORDMODELNO

Template number

0-65535

Mandatory


0-32 Optional


Optional

4 STR\KEYBOARD SDN1Number of the start subscriber

2-40Mandatory

5 STR\KEYBOARD SDN2Number of the end subscriber

2-40 Optional



Error Code Meaning



SDN1 and SDN2 represents start telephone number and end telephone number respectively. SDN2 is used only for batch users.

MODELNO, a template of customer care system intelligent subscription service, represents a collection of basic attributes of intelligent subscription services, including GT code, DP point, and service key.

1. Creating the customer care intelligent subscription service

CREATE_BOSSCSI:MODELNO=1,NET=1,LATA=25,SDN1="52871000";

Meaning: Creates the intelligent subscription service of the 52871000 user whose template code is 1, area code is 25, and network type is 1.

Error Code

Information Meaning


The intelligent service template does not exist.


Other data of the subscriber are not reasonable.


Subscription data already exists.

Deleting Customer Care System Intelligent Subscription Service (7273)

DELETE_BOSSCSI:MODELNO=,NET=,LATA=,SDN1=,SDN2=;

This command is used to delete the customer care system intelligent services.

SN

Type Name Description Range Selection


0-32 Optional

2 INT\WORDMODELNO

Template number

0-65535

Optional


Optional

4STR\KEYBOARD

SDN1Subscriber number

2-40 Mandatory





SN

Type Name Description Range Selection

5STR\KEYBOARD

SDN2Subscriber number

2-40 Optional


MODELNO, a template of customer care system intelligent subscription service, represents a collection of basic attributes of intelligent subscription services, including GT code, DP point, and service key.


1. Deleting the customer care system intelligent subscription service

DELETE_BOSSCSI:MODELNO=1,NET=1,LATA=25,SDN1="52871000";

Meaning: Deletes the customer care system intelligent subscription service data when the user number is 52871000, and the template number is 1.

Error Code

Information Meaning


The subscription data, as well as the template does not exist


Other data of the subscriber are not reasonable.

Modifying SMS Attributes (4202)

MODIFY_SUB_ATTR:NET=?,LATA=?,SDN1=?,SDN2=?,ENPBXTAG=?,DISPBXTAG=?;

This command is used to modify the SMS attributes of a subscriber.

SN


RangeSelection


0-32Mandatory


Mandatory


2-40Mandatory


5 ENUM ENPBXTA Activation 0-32 Optional






SN


RangeSelection

G

of attributes of other items for the user group

6 ENUMENPBXTAG

Deactivation of attributes of other items for the user group

0-32 Optional



ENPBTAG and DISPBTAG both indicate whether the subscriber is granted with the SMS attributes. ENPABTAG=9 indicates the subscriber is granted with SMS attributes, while DISPBTAG=9 indicates not.

1. Adding SMS attributes

MODIFY_SUB_ATTR:NET=1,LATA=758,SDN1="8880000",SDN2="8880000",ENPBXTAG =9;

Meaning: Grants the subscriber with the SMS attributes.

2. Deleting SMS attributes

MODIFY_SUB_ATTR:NET=1,LATA=758,SDN1="8880000",SDN2="8880000",DISPBXTAG=9;

Meaning: Cancels the SMS attributes of the subscriber 8880000 .

Error Code

Information Meaning













Creating User Password Service (7321)

CREATE_PASSWORD:NET=?,LATA=?,SDN=?,TN=?;

This command is used to create/modify the password of the user. The password service should be created first before the user registers the barring of outgoing calls service


RangeSelection


0-32Mandatory


Mandatory


2-41Mandatory

4 STR\STRING TNRegistration of the password

2-40 Optional


SDN is the subscriber digit number.

TN is the registered password.

1. Creating the user password service

CREATE_PASSWORD:NET=2,LATA=25,SDN="2180001",TN="1234";

Meaning: Creates the password of the password service for the subscriber 2180001 to 1234.

Error Code

Information Meaning


The length of the password is not 4, or the password contains “#” or “*” characters.

0x1A65 SDN does not exist. SDN does not exist

0x1A19The supplementary service is not subscribed,

The password service is not registered.







Creating User Hotline Number (4307)

CREATE_HOT:NET=?,LATA=?,SDN=?,TN=?;

This command is used to create the hotline number for a subscriber.


RangeSelection


0-32Mandatory


Mandatory


2-41Mandatory

4 STR\KEYBOARD TNHotline number

2-40 Optional


SDN represents the Subscriber digit number.

TN represents the hotline number of the subscriber.

1. Creating the hotline number for a subscriber

CREATE_HOT:NET=2,LATA=25,SDN="1280001",TN="1280066";

Meaning: Creates a 1280066 hot line number for the 1280001 user number.

Error Code

Information Meaning

0x1A65 SDN does not exist. SDN does not exist.

0x1A19The supplementary service is not registered.

The hotline service is not registered.

0x1A4FServices conflict with each other.

Services conflict with each other.


The hotline number already exists,







Modifying User’s Unused Attributes (4202)

MODIFY_SUB_ATTR:NET=?,LATA=?,SDN1=?,SDN2=?, NOTINUSE=?;

This command is used to modify unused attributes for a subscriber.


RangeSelection


0-32Mandatory


Mandatory


2-40Mandatory


5 ENUMNOTINUSE

Unused 0-1Mandatory



NOTINUSE represents if the user has a related logic number. When the HLR does not insert the relationships of users to the SS, the use mark of the user is modified to 1 (the user is unused). At the same time, the configuration program modifies the number allocation mark field of the hundreds table to 0 (i.e., the number is not allocated).

1. Modifying the user to the used state

MODIFY_SUB_ATTR:NET=1,LATA=758,SDN1="8880000",SDN2="8880000", NOTINUSE=0;

Meaning: The 8880000 user is in normal use.

2. Modifying the user to the unused state

MODIFY_SUB_ATTR:NET=1,LATA=758,SDN1="8880000",SDN2="8880000", NOTINUSE=1;

Meaning: Modifies the user 8880000 to unused state.

Error Code

Information Meaning







Error Code

Information Meaning




The subscriber does not exist.



Querying Single User (7278)

SHOW_ONESDN: NET=?,LATA=?,SDN=?;

This command is used to display part of the single user’s attribute, which is applied to AR customer’s BOSS system.


Selection

1 INT\BYTE NET Network type 0-32 Mandatory


Mandatory

3STR\KEYBOARD

SDNSubscriber number

2-40 Mandatory

SN Type Name Description Range

1 INT\BYTE NET Network type 0-32

2 INT\WORD LATA Area code 0-65535

3 STR\KEYBOARD SDN Subscriber number 2-40

4 INT\BYTE SDNTYPEType of subscriber number

0-2

5 INT\WORD DAS Digit analyzer 0-65535

6 INT\DWORD NODEID Node ID0-2147483647

7 INT\BYTE INHOLDIncoming suspension

0-1

8 INT\BYTE OUTHOLDOutgoing suspension

0-1

9 INT\BYTE PORTTYPEType of carried number

0-2

10 STR\KEYBOARD NP Carried number 0-40

11 INT\BYTE TSTo use/Not use the service at terminal side

0-1


Format Function Input Parameters

Return Parameters


SN Type Name Description Range

12 STR\STRING SRVREG Registered service 0-255

13 STR\STRING SRVATV Triggered service 0-255

NET is customized by the subscriber. For example, 1 indicates China Telecom.

SDN represents the subscriber number.

SDNTYPE represents type of the subscriber number. 0 indicates common number, 1 indicates SIP number, and 2 indicates H323 number.

As a symbol to mark the incoming suspension, INHOLD=0 represents no incoming suspension, and 1 indicates yes. As a symbol to mark the outgoing suspension, OUTHOLD=0 represents no outgoing suspension, and 1 indicates yes.

PORTTYPE=0 represents no Port IN or Port Out, 1 indicates PORT IN, and 2 indicates PORT OUT. If Port In is used, NP must not be empty.

TS is used to decide the use of the services at terminal side. TS=0 indicates no use, and 1 indicates yes.

SRVREG, as a multi-instance parameter, represents registered user service. For more information, see Meaning ofService Enumeration Value .

SRVATV, as a multi-instance parameter, represents triggered service. For more information, see Dependent services are akind of services that must be registered only after theregistration of other services. For example, it is necessary toregister the password service before the registration of theoutgoing restriction service. Dependent services must not beregistered through the subscription command. Instead,registration or activation of these dependent services isrealized by other commands. All dependent services arelisted as follows..

Displaying the user’s attribute

SHOW_ONESDN:NET=1,LATA=025,SDN1="4826606"

Meaning: Displays the attribute of the telephone number 025-4826606.



Example




Appendix A

Meaning of Service Enumeration Value

Services are classified into two types, independent services and dependent services. Independent services correspond to the TYPE parameter of ordinary subscription command.

Independent services are listed as follows.

SN Meaning

0 Forwarding unconditional

1 Forwarding on busy

2 Forwarding on no reply

3 Three-party conversation

4 Conference call

5 Malicious call tracing

6 Call waiting

7 Caller number presentation

8 Caller number presentation restriction

11 MSN service

12 Abbreviated dialing

13 Instant hot line

14 Delayed hot line

16 Do not disturb in a certain time

17 Do not disturb

18 Alarm clock service

19 Registered call on busy

20 Call back on busy

21 Absent service

23 Emergency call override

40 Immediate malicious call

42 Password service

47 Missed number display


SN Meaning

50 Call forwarding

51 Prepaid service

52 Forced release service

53 Secretary service

55 Voice mail box service

56 IP call waiting service

57 Virtual conference service

58 Ring service

59 Pre-set net service

60 One-number to ring multiple phones service

61 Offline service transfer

62 Caller number signing the trigger service

65 One number connect you

66 Anonymous call allowed

67 Anonymous call restricted

68 Anonymous call permanently restricted

71 Don’t Forward to International Toll Number service

72 Call back service

73 Default service recovery service

74 Once alarm service

75 More-than-once alarm service

76 Call across operator service

78 Anonymous call refuse service

79 Redialing last number service

83 Announcement Lamp service

89 Authentication And Authorization service

90 Three-party query

92 Message waiting indication

96 Automatically dialing back to last call service

101 Listening voice prompt service

102 Selective call forwarding service

Dependent services are a kind of services that must be registered only after the registration of other services. For example, it is necessary to register the password service before the registration of the outgoing restriction service. Dependent services must not be registered through the subscription command. Instead, registration or activation of these dependent services is realized by other commands. All dependent services are listed as follows.



Number Meaning

15 Outgoing call restriction service

24 Out-group call forwarding unconditional

25 Out-group call forwarding on busy

26 Out-group call forwarding no answer

29 Call forwarding to international toll restricted

30 Incoming toll forwarding restricted

33 Intra-group pickup

34 Extension forwarding

35 Direct Call Pick-up without Barge-in

38 Simple attendant console

41 Outgoing Call Barring Locked Automatically

43 Called destination code connection

44 Called destination code restriction

45 Caller destination code connection

46 Caller destination code restriction

50 Call forwarding service

69 Remote control service

70 Long-distance call restricted

84Call forwarding to fixed number unconditionally

85 Call forwarding to fixed number on busy

86 Call forwarding to fixed number no answer

87 Transfer Number

93 Call Park

94 Priority intrusion service

97 Direct Call Pick-up with Barge-in

100 Remote call service

Definition of Call Authority Enumeration

Description of parameters ENRIGHTO and ENRIGHTI of the ordinary subscription command is as follows:

SN Meaning

0 With/Without authority to perform call of the local



SN Meaning

SS

1With/Without authority to perform suburban and rural call of the local SS

2With/Without authority to perform national call of the local SS

3With/Without authority to perform international call of the local SS

4With/Without authority to perform local call of the SS outgoing from the trunk

5 With/Without authority to perform suburban and rural call of the SS outgoing from the trunk

6 With/Without authority to perform national call of the SS outgoing from the trunk

7With/Without authority to forward the information console

8With/Without authority to perform international call of the SS outgoing from the trunk

9 Charged special service

10 Commercial group authority

11 Authority outside group

12 High charge

13With/Without authority to perform local and network call of the SS outgoing from the IP

14With/Without authority to perform national call of the SS outgoing from the IP

15With/Without authority to perform international call of the SS outgoing from the IP





Glossary

BOSS refers to Business Operation Support System, i.e., the customer care system of the customer.

SSNE refers to SoftSwich System Net Element, such as ZXSS10 SS1b, ZXMAG 9000.

MML refers to Man-Machine Language.

OSNE Interface refers to all interfaces between BOSS and SSNE.


BOSS SSNE MML OSSNE Interface




Figures

Figure 1 Customer Care System.................................................2

Figure 2 The Communication Flow of Customer Care System.....3





Tables

Table 1 Chapter Summary...........................................................i

Table 2 Typographical Conventions............................................ii

Table 3 Mouse Operation Conventions........................................ii





Index

Announcement Play Record Deletion Command (4054), 9, 30

billing, i, ii, 9, 12, 19, 32, 53BOSS, 1, 2Call Restriction Group

Modification Command (4202), 9, 34

Commercial Group User Addition Command (4233), 9, 35

Commercial Group User Deletion Command (4234), 9, 36

Creating Customer Care System Intelligent Subscription Service (7272), 10, 56

Creating User Hotline Number (4307), 10, 60

Creating User Password Service (7321), 10, 59

Creating V5 Number Allocation User (4848), 10, 52

customer care system, 1, 2, 3, 19, 52, 56, 57

Deleting Customer Care System Intelligent Subscription Service (7273), 10, 57

IMP, 2, 3ISDN User to Ordinary User

Conversion Command (4274), 9, 40

MML, i, 2, 3, 5, 6, 7Modifying SIP User Password

(7799), 10, 54Modifying the Relationship

between Telephone Number and TID (7283), 10, 51

MSN/DDI Service of ISDN User Creation Command (7324), 10, 43

MSN/DDI Service of ISDN User Deletion Command (7326), 10, 45

Not Ready for Service Command (4202), 9, 31

Number Change Command (4202), 9, 28

Ordinary Service Deletion Command (4303), 10, 42

Ordinary Service Registration Command (4302), 9, 41

Ordinary User Subscription Command (4210), 9, 10

Ordinary User to ISDN User Conversion Command (4272), 9, 37

Ordinary User to V5 User Conversion Command (4835), 10, 48

Owe Fee Service Access/Suspension Command (4202), 9, 26

Public Telephone Billing Command (4202), 9, 32

Service Access Command (4208), 9, 24

SIP User Subscription Command (4190), 9, 18

SSNE Interface Message Processor, 1, 2

User Call Authority Modification Command (4204), 9, 25

User Deletion Command (4206), 9, 21

User Suspension Command (4209), 9, 22

V5 User to Ordinary User Conversion Command (4837), 10, 49

ZXMSG 7200, iZXMSG 9000, i


Documents

Sjzl20084494-ZXSS10 SS1b (V2.0.1.06.1) Soft Switch Control Equipment Billing Command User Guide