Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
SIT-STAND TRAINING MANUAL
SIT-STAND TRAINING MANUAL
2
| TABLE OF CONTENTS
Table of Content
Company Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
Product Information
Benefits of Sit-Stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Design Story . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-9
Sell Sheets
Lotus™ DX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Lotus™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Lotus™ VE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Lotus™ Monitor Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Anti-Fatigue Mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Competitive Comparisons
Surface Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
Tower . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-21
FAQ’s
Lotus™ DX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-31
Lotus™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-37
Lotus™ VE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38-41
Resources
Special Pricing Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Website Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Talk Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46-49
Lotus™ in the Marketplace . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-51
Worktivity Wellness Seminars . . . . . . . . . . . . . . . . . . . . . . . . 52-53
Appendix - Dimensional Drawings
Lotus™ DX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54-55
Lotus™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-57
Lotus™ VE with Single Monitor . . . . . . . . . . . . . . . . . . . . . . . . 58-59
Lotus™ VE with Dual Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . 60-61
1
Four Generations of LeadershipInto it’s fourth generation of entrepreneurial family leadership,
Fellowes blends its proud heritage with a warm embrace to change,
continuous improvement, and innovative solutions.
Our HistoryFor 100 years Fellowes has been delivering professional solutions to
support the evolving world around us. Building on the principle of
creating meaningful and distinctive value for our customers and end-
users, our inspiration comes from those who serve.
SIT-STAND TRAINING MANUAL
2
WE ARE THE FELLOWES FAMILY.WE BELIEVE THE WORKPLACE SHOULD BE THE OPTIMAL ENVIRONMENT FOR A PERSONAL PURSUIT OF MEANINGFUL WORK. WE KNOW THAT PERSONAL IDENTITIES AND LEGACIES ARE CREATED IN THE WORKPLACE, AND WE DESIGN FOR ENVIRONMENTS THAT ASSIST IN TURNING PASSIONS INTO
PURPOSE. WE HONOR CONTRIBUTIONS OF INDIVIDUALS BY
ENABLING ORGANIZATION, PRODUCTIVITY AND WELLNESS
THROUGH PROACTIVE INNOVATION, SO THEY CAN FOCUS ON WHAT MATTERS MOST.
WE ARE BONDED TO CREATING WORKSPACE SOLUTIONS THAT COMMUNICATE CARE AND RESPECT, AND WE BELIEVE THAT WITH THE RIGHT TOOLS, EVERYONE HAS THE
ABILITY TO FULLY HARNESS THEIR POTENTIAL. WHEREVER WORK CAN BE
DONE, WE WILL BE THERE TO FOSTER PERSONAL SUCCESS,
HELPING OUR CUSTOMERS BE THE BEST THEY CAN BE.
WE ARE FELLOWES, AND WE ARE HERE TO HELP INDIVIDUALS MAKE AN IMPACT EVERY DAY.
BY A CENTURY-LONG COMMITMENT
| COMPANY OVERVIEW
3
We want people to be the best they can be. More productive.
More efficient. Happier. Healthier. That’s why we make workplace
solutions like business machines, storage products, workspace
wellness solutions, and air purifiers. Products designed to meet—
and exceed—the needs of an ever-changing world.
Whether in a huge corporate center or a cozy home office, we’ll
make them more productive and help them dominate their day.
Because, to be at your very best, you need someone in your corner.
Fellowes Brands.
We care deeply about
helping you be at your best.
SIT-STAND TRAINING MANUAL
4
Workspace WellnessWork Better. Feel Better.
Workspace and wellness, connected. Fellowes Workspace Wellness
products operate on a simple but powerful notion: We believe office
solutions should do more than improve your performance. They
should also improve your health. Our products feature advanced
ergonomics to mitigate the negative effects of everyday tasks along
with groundbreaking solutions to promote the positive effects of
body movement. It’s innovation with a new goal: enhance health; go
beyond just working better – feel better.
| COMPANY OVERVIEW
5
SIT-STAND TRAINING MANUAL
6
Benefits of Sit-Stands
You burn 30 percent more
calories when you are
standing rather than sitting
Prolonged sitting has been
linked to high blood pressure
and elevated cholesterol
Two hours of sitting cancels
out 20 minutes of exercise
| Health
| PRODUCT INFORMATION
7
Benefits of Sit-Stands | Productivity
People who collaborate are
more creative, productive
and confident
Research shows a 46 percent
increase in workplace
productivity with use of
standing desks
Charge your phone and
your mind: Use of a sit-
stand desk shows increased
cognitive performance
SIT-STAND TRAINING MANUAL
8
The need for a solution. The Fellowes
Team, including Tai Matlin, Director
of Innovation & Technology had been
carefully observing the way people
work and knew that the stagnation of
sitting all day was detrimental
to health. But existing products
designed to encourage
movement made sit-stands an
option, not an inspiration.
The challenge. The natural next
step for Fellowes would be to bring a
sit-stand solution to the marketplace
like no other. The Team defined the
challenge: create an elegant design
with movement and fluidity that not
only moved beautifully, but inspired
others to move effortlessly as well. The
creation of the Lotus™ began.
Design Story
Ease of motion was key. Early products
in the sit-stand category were difficult
to lift and lower. The team developed
innovative approaches to smooth
operation from sitting to standing,
encouraging daily movement, simply by
making it easier. The objective was to not
make it look utilitarian. They negotiated
a fresh dimension
to make sure the
movement was
captured. They
were looking to
design an elegant,
upscale platform
for the user vs what
we have seen in
the market.
| PRODUCT INFORMATION
Innovation in Bloom
...create an elegant design that not
only moved beautifully, but inspired
others to move effortlessly as well.
Tai MatlinDirector of Innovation & Technology
9
Effortless integration was essential.
The Team knew nothing discouraged
movement more than compromise. Too
many sit-stands interfered with available
workspaces and made them less likely to
be used. The Team focused on detailed
refinement. The goal: make it work
anywhere. As a result, Fellowes Industrial
Design Manager Taiwon Choi had an
inspiration for a signature waterfall
work surface that created more space,
seamlessly connecting the keyboard
tray with the monitor riser and provided
easy access to phones and digital
devices, documents and reminder notes.
The team made a point to consider the
user’s point of view when creating the
design. All the lines were sculpted so the
movement would be seen from multiple
points of view. The comprehensive
design fully integrates into any office
environment. Nothing like it exists in the
market today.
A universal solution was necessary. Most
importantly, the Team recognized that
the Lotus must inspire many, not just
a few. They developed an adjustable
extension spring engineering mechanism
that optimized instantly to variations in
hand strength and easily adjusted to any
user height, a technology that intuitively
adjusts to a wide variety of physical
differences in the user. This evolved into
the patented Smooth Lift Technology™,
completing the ultimate sit-stand design.
Product development and marketing
all worked collaboratively to find the
right solution for the end user. Today,
the Lotus has received the attention of
the global design community and has
received several awards worldwide. A
distinctive design that integrates into
the modern office, it not only moves
effortlessly, but helps users get out of a
sedentary workplace.
Taiwon ChoiIndustrial Design Manager
SIT-STAND TRAINING MANUAL
10
| PRODUCT INFORMATION
Sit-Stand Workstation
Lotus™ DX
*Review your device user manual to confirm if it’s Qi-enabled. Popular devices that are Qi-enabled include Apple iPhone 8, X, and Samsung Galaxy S6, S7, and S8.
Convenient wireless charging pad*
Easy front access to 2-port USB charging station
Keep your workstation stable and change positions effortlessly with dual handle design and patent-pending Smooth Lift Technology™
Waterfall design allows you to prop up your phone, note pad or documents
Built-in Microban® antimicrobial protection fights the growth of bacteria on surfaces
Customize your comfort with 22 different height settings and 17” of vertical adjustment
Premium cord management with rear USB ports for your keyboard and mouse
Arrives fully assembled
Affordably convert any existing desk into a sit-stand workstation
Product videosat Staples.com
11
Staples No.White 2741253 Black 2741252
Mfr No.White 8080201 Black 8080301
Keyboard Platform (W x D) 32 ¾” x 12 1⁄8”
Top Platform (W x D) 31 ¾” x 8 15⁄16”
Top Platform Height (in lowest setting)
5 ½”
Weight Capacity 35 lbs
Max Height from Desk 17”
Single Monitor Arm(optional/sold separately)
Staples No. 2736567 Mfr No. 8042801
Dual Monitor Arm(optional/sold separately)
Staples No. 2502524 Mfr No. 8042901
Warranty 5 Years
SIT-STAND TRAINING MANUAL
12
Sit-Stand Workstation
Lotus™
Product videosat Staples.com
Keep your workstation stable and change positions effortlessly with dual handle design and patent-pending Smooth Lift Technology™
Waterfall design allows you to prop up your phone, note pad or documents
Customize your comfort with 22 different height settings and 17” of vertical adjustment
Innovative cord management and device charging slot allow your entire workspace to move freely with you
Arrives fully assembled
AWARDS
Affordably convert any existing desk into a sit-stand workstation
| PRODUCT INFORMATION
13
Staples No.White 2344508 Black 2344509
Mfr No.White 0009901 Black 0007901
Keyboard Platform (W x D) 32 ¾” x 12 ¹/8”
Top Platform (W x D) 31 ¾” x 8 15/16”
Top Platform Height(in lowest setting)
5 ½”
Weight Capacity 35 lbs
Max Height from Desk 17”
Single Monitor Arm(optional/sold separately)
Staples No. 2736567 Mfr No. 8042801
Dual Monitor Arm(optional/sold separately)
Staples No. 2502524 Mfr No. 8042901
Warranty 5 Years
SIT-STAND TRAINING MANUAL
14
| PRODUCT INFORMATION
Sit-Stand Workstation
Lotus™ VE
Smooth Lift Technology™ allows you to effortlessly transition from sitting to standing
Ash wood veneer top provides unique look and increased stability
Waterfall design allows you to prop up your phone, note pad or documents
Compact design for smaller workstations
Convenient channel keeps devices and notes at your fingertips
Customize your comfort with 15” of vertical adjustment
The single clamp design with limited installation can be mounted to the back edge of any work surface (1” - 31⁄8”)
Single handle can be mounted to the left or right side of the platform
Depth adjustable for desks 24”, 28” and 32” deep
Integrated cord management
Affordably convert any existing desk into a sit-stand workstation
Product videosat Staples.com
15
Customize your comfort with 15” of vertical adjustment
Staples No.Single 2750862 Dual 5741250
Mfr No.Single 8080101 Dual 8082001
Keyboard Platform (W x D) 28 ¾” x 9”
Top Platform (W x D) 28 ¼” x 7 ½”
Top Platform Height(in lowest setting)
5 ½”
Weight Capacity 25 lbs
Max Height from Desk 15”
Color Black Ash Wood
Warranty 5 Years
SIT-STAND TRAINING MANUAL
16
| PRODUCT INFORMATION
80429018042801
Compatible with the Lotus™ & Lotus™ DX Sit-Stand Workstation
Monitor Arm Kits
Staples No. Mfr No. DescriptionHeight Range
Height Adjustments Rotation
Weight Capacity
2736567 8042801 Lotus™ Single Monitor Arm Kit 16"Infinite within height range
180° 17 lbs.
2502524 8042901 Lotus™ Dual Monitor Arm Kit 16"Infinite within height range
180°13 lbs.
per arm
• Raises monitors to an optimal viewing height to prevent neck strain and free up valuable workspace
• Easy to mount via grommet hole allowing for quick set-up
• Height adjusts up to 16” above the top surface of the Lotus™ or Lotus™ DX Sit-Stand Workstation
• 8042901 holds two monitors up to 26”, 8042801 holds a monitor up to 27”
• Meets VESA mounting standards
• 5 Year Limited Warranty
Product videosat Staples.com
17
8707001
8707101
Anti-Fatigue Floor Mats
• Stay active and comfortable with Fellowes durable floor mats
• Promote stretching and movement throughout the day with the unique shape of the ActiveFusion™ Mat
• Encourages subtle movement to prevent fatigue
• Use with any sit-stand for extra support while standing
• Beveled, no curl edges help avoid trip hazards
• Sturdy high density polyurethane design
ActiveFusion™ Anti-Fatigue Mat
Staples No.FEL-8707101 (4 / master)FEL-8707102 (1 / master)
Mfr No.8707101 (4 / master)8707102 (1 / master)
Dimensions 24” x 36”
Warranty 5 Years
Anti-Fatigue Wellness Mat
Staples No.FEL-8707001 (4 / master)FEL-8707002 (1 / master)
Mfr No.8707001 (4 / master)8707002 (1 / master)
Dimensions 24” x 36”
Warranty 5 Years
SIT-STAND TRAINING MANUAL
18
Sit-Stand Competitive MatrixSurface Mount
Brand Fellowes Fellowes Ergotron
Description Lotus™ DX Sit-Stand Work-station
Lotus™ Sit-Stand Workstation
Workfit-T
Staples No. 2741253 (White)2741252 (Black)
2344508 (White)2344509 (Black)
IM1YN2406 (White) IM1YN2405 (Black)
Mfr. No. 8080201 (White)8080301 (Black)
0009901 (White)0007901 (Black)
33-397-062 (White)33-397-085 (Black)
Vertical Adjustment 17" 17" 15"
Keyboard Tray Size (W X D) 33" x 12" 33" x 12" 25" x 9"
Overall Dimensions (W x D) 32" x 24" 32" x 24" 35" x 23"
Dual Platform Y Y Y
Monitor Mount Optional Optional Optional
Weight Capacity 35 lbs 35 lbs 35 lbs
Warranty 5 years 5 years 5 years
Integrated Cord Management
Y Y N
Adjustable Tension Y Y N
Device Channel Y Y N
Antimicrobial Protection
Y N N
USB Ports Y N N
Wireless Charging Y N N
| COMPETITIVE COMPARISONS
19
Varidesk 3M Alera Lorell
Pro Plus 36 3M Precision Standing Desk
Sit-Stand Lifting Workstation
Deluxe Sit-to-Stand
2741338
Pro Plus 36 SD60B ALE-AEWR2B 99759
14" 14.5" 14" 11"
20" x 14.25" 26.4" x 13" 23.5” x 9.5” 29.5” x 12”
36" x 29.75" 35.4" x 23.5" 35.12" x 23.37" 40.5" x 27.3"
Y Y Y Y
Optional Optional Optional N
35 lbs 35 lbs 35 lbs 35 lbs
1 year 5 years 5 years 5 years
N N N N
N N N N
N N Y N
N N N N
N N N N
N N N N
SIT-STAND TRAINING MANUAL
20
Sit-Stand Competitive MatrixTower
Brand Fellowes Ergotron Ergotron
Description Lotus™ VE Sit-Stand Worksta-tion
WorkFit-SR Sit-Stand Desktop Workstation
WorkFit-S, with Worksurface+
Staples No. 5741250 (Dual)2750862 (Single)
IM13N0088 (Dual)IM13N0092 (Single)
IM1NF0996 (Dual)IM1NF0998 (Single)
Mfr. No. 8082001 (Dual)8080101 (Single)
33-407-085 (Dual)33-416-085 (Single)
33-349-200 (Dual)33-351-200 (Single)
Vertical Adjustment 15" 18.5" 18"
Keyboard Tray Size (W X D) 28.75" x 9" 29.5" x 21.8" 27" x 9"
Overall Dimensions (W x D) 29" x 28.5" 29.5" x 25.2" 23" x 15"
Dual Platform Y N Y
Monitor Mount Y Y Y
Weight Capacity 25 lbs 25 lbs 31 lbs
Warranty 5 years 5 years 5 years
Integrated Cord Management
Y Y N
Adjustable Tension N Y Y
Device Channel Y N N
Attachment Method Clamp Clamp Clamp
| COMPETITIVE COMPARISONS
21
HON Alera Kantek
Directional Desktop Sit-To-Stand
Sit Stand Workstation Sit-to-Stand
2409582 (Dual)2412166 (Single)
KTKSTS800W (White)
S1102 (Dual)S1101 (Single)
AEWR5B STS800
16" 16" 14"
31.5" x 9.3" 31.5" x 9.5" 24" x 12"
31" x 32" 31.5" x 40" 24" x 23.5"
Y Y Y
Y Optional Optional
25 lbs 25 lbs 25 lbs
Lifetime 5 years -
N N N
Y Y Y
N N N
Clamp Clamp Clamp
12-11-17
Lotus™ DX Sit-Stand Workstation 8080301/8080201
FAQ
Q: Is there assembly required?
A: The workstation comes fully assembled out of the box. To enable the USB and Wireless Charging functionality you will need to plug in the power cable and connect the rear USB hub to your computer with the provided Type B/USB Cord. Refer to step 1 in the Cord Management section of the instruction manual.
Q: How much weight can the Lotus sit stand hold?
A: It can hold up to 35lbs total; 30lbs on the top platform and 5lbs on the keyboard platform. We would not recommend using the product with less than 10lbs. You can adjust the tension with our patent-pending Smooth Lift Technology™ to offset the weight of your equipment and accessories (between 10 – 35lbs).
Q: Can you fit two monitors on the top surface?
A: Monitors may have slightly different sized bases and frames, but if you are using a modern monitor from one of the large manufacturers, you should be able to fit two monitors side by side up to 24”.
SIT-STAND TRAINING MANUAL
22
FAQ Lotus™ DX Sit-Stand Workstation 8080301/8080201
| FAQ - LOTUS™ DX
12-11-17
Q: Does the Lotus Sit Stand need to be fastened to the desk?
A: No, the Lotus was designed as a stand-alone sit stand that can sit on top of the desk and has been BIFMA tested to ensure stability. The workstation should be placed on a flat surface that can accommodate the entire width and depth of the product without overhang.
Q: I’m concerned it might damage my desk.
A: The Lotus has rubber feet that help protect the desk from scratching the surface of your desk.
Q: What’s the minimum size of desk required to successfully install this product?
A: The Lotus should be placed on a sturdy, flat surface at least 26.25” deep and 33.75” wide to have sufficient space for the product.
Q: How stable is the keyboard platform when typing?
A: Under normal use, the platform is stable. If you want to maximize the durability of the product, please do not lean or apply excessive force to the keyboard platform.
23
12-11-17
Q: I can’t understand how to adjust the Smooth Lift Technology™ (patent pending), can you explain it to me?
Refer to the Fellowes® Lotus™ Sit Stand Workstation - Smooth Lift Technology Video
A: Ensure your workstation is raised to the highest position and all of your items are placed on it. As per the image below, turn the knob clockwise (toward the + sign) to offset heavier weights and counter clockwise (towards the – sign) to offset lighter weights. Lotus is shipped at the lowest setting which will help offset 10lbs. To get to the highest setting which will help offset 35lbs is 29 full rotations. *For example, if you have two monitors that weigh 11lbs each and a keyboard and mouse that combined weigh 1.5lbs, you would turn the knob clockwise approximately 10 full rotations*. The exact number of rotations depends on your personal comfort raising and lowering the platform. Once you have properly adjusted the Lotus, it should feel effortless to raise and lower.
*This is just a guideline – every person will have a different preference.
Q: I did not line up my Velcro properly the first time and now it’s not usable. Can I have more sent to me? Is there a product you would recommend to replace?
A: These are meant for single use as specified in the manual. We have spare parts for purchase that we can supply. You could also go to your local hardware store and purchase adhesive discs (3.5mm).
Q: How do I set up the wireless charging pad? How do I use it?
A: To set up the wireless charging pad all you need to do is plug in the power cord to an outlet and into the rear USB hub. Once you do this, the LED on the wireless charging pad will light up then turn off. Now you’re ready to wirelessly charge your Qi-enabled phone! Simply place your Qi-enabled phone onto the wireless charging pad within the guide lines. Your phone should now be charging!
SIT-STAND TRAINING MANUAL
24
| FAQ - LOTUS™ DX
12-11-17
Q: How does the cord funnel attach to the Lotus sit stand?
Refer to the Fellowes® Lotus™ Sit Stand Workstation - Cord Management Video
A: There are three (2) locations in the rear cord channel that you can choose from. Find the slot that will best accommodate your setup and place the cord funnel into the slot. You will feel it magnetically attach to the Lotus. The cord funnel should now be in place.
Q: How can I apply the cable zip using the cable zip tool?
Refer to the Fellowes® Lotus™ Sit Stand Workstation - Cord Management Video
A: Refer to step 3 in the instruction manual. First you will need to clamp the cable zip tool around all cords below the cord funnel (make sure the arrow on the cable zip tool is pointing upward). Next, take the cable zip and push upward into the tool so that the cable zip beings wrapping around the tool. Make sure the seam of the cable is facing the tool. Once it’s started, pull downward on the cable zip tool while holding the top of the cable zip. Continue sliding the tool until all cords are in the cable zip.
Q: How long should the power cables be?
A: Most cable lengths are an average of 6.5ft, which should be sufficient for working when standing however it would be important to consider where the power sockets are located. The sit stand raises 17” above the desk. Have the Lotus in the highest position when putting items on to ensure proper cord length.
25
12-11-17
Q: What is the best way to clean the Lotus Workstation?
A: Use a soft cloth with any surface cleaner.
Q: Is Lotus BIFMA certified?
A: At this time there are no BIFMA certifications for sit-stands. Our Lotus Sit-Stand Workstations have passed a series of BIFMA tests which are most applicable to sit stand desk converters.
Q: How long does it take to charge a phone – is it same as using a cable?
A: It’s not a straight answer, depends on the size of the phone’s battery, if you’re using it while charging, and the battery level when you start charging (20% life will charge faster than 85% life). See below for estimate per type of phone:
Device Battery size (math)
*2A (time in hours) *Front USB ports
*1A (time in hours) *Wireless Charger
Galaxy S8 3000 1.5 3
Galaxy S8+ 3500 1.75 3.5
10.5 iPod Pro 6080 3.04 6.08
12.9 iPod Pro 8200 4.1 8.2
IPhone 7 1960 0.98 1.96
IPhone 7+ 2900 1.45 2.9
iPhone 8 1821 .91 1.82
iPhone 8+ 2675 1.34 2.68
iPhone X 2716 1.36 2.71
SIT-STAND TRAINING MANUAL
26
| FAQ - LOTUS™ DX
12-11-17
Q: Is wireless charging dangerous? A: No, it is not dangerous. Wireless charging is safe. Wireless charging system must follow rules and regulations for electromagnetic interference (EMI/EMC), sometimes also called “radio disturbance”, and magnetic fields. The device will become warm in use, but this normal.
Q: Do you need to remove your phone’s case or any other accessories from your phone? E.g. ear phones
A: Depending on the thickness of the case it may not register. Most thin/normal size cases will work properly. It may be required to remove the case from the phone to get the charger to work. Wireless charging works by distance, and that distance is very small, and the more obstructions there are the slower the charge will be (wall thickness, thickness of phone cases, pop sockets, etc).
Q: How much power does it take (voltage)?
A: The entire system is 5V. The wireless charger pulls up to 1 Amp.
Q: Will wireless charging affect my battery performance?
A: No. Follow all proper charging procedures outlined in the manual.
Q: Could it damage my phone?
A: Ensure you’re using a Qi certified phone and follow all warnings and instructions in the owner’s manual.
Q: Does it just charge phones or any electronic device enabled with Qi tech?
A: It is designed for use with phones.
27
12-11-17
Q: Can we advise customers that they can use the i-Phone adapters?
A: Yes, you can use a Qi-certified adapter. These adapters plug into your charging slot and lay flat against the back of your phone (see image below).
Q: Why can’t I use my USB in front for USB Memory Drives or Mice and Keyboard?
A: Front is only charging, no data transfer. You can plug the device into the two rear USB ports which do allow data transfer.
Q: Why is the download speed slow when using the two rear UBS ports?
A: If you are using Windows 10, this is a known issue with all devices. The download speeds are significantly slow no matter what USB port you use (even directly into the computer)! This is not an issue with the Lotus DX, but rather with Windows 10.
Q: What is wireless charging and how does it work?
A: Wireless charging means, as the name suggests, you no longer need to plug a cable into your smartphone to charge it. Simply placing it face up on the charging pad is enough to start charging up your smartphone’s battery. Wireless charging works by transferring energy from the charger to a receiver in the back of the phone via electromagnetic induction. The charger uses an induction coil to create an alternating electromagnetic field, which the receiver coil in the phone converts back into electricity to be fed into the battery. The closer the phone is to the wireless charging pad, the better the charge.
Q: If my device is charging wirelessly can you still use the USB ports?
A: Yes, if your device is charging wirelessly you can still utilize the USB ports to charge additional devices.
SIT-STAND TRAINING MANUAL
28
| FAQ - LOTUS™ DX
12-11-17
Q: Can I charge one device with the wireless charging pad and a USB cable at the same time?
A: Yes, you can but it does not act as a “dual” charge. Your device will automatically pick one charging source (usually USB).
Q: What phones are capable of wireless charging without any adapters?
A:
Apple iPhone 8, X
Samsung Galaxy: S8, S7, S7 Edge, Note 5, S6, S6 Edge
Microsoft Lumia: 1520, 1020, 930, 929, 928, 920
Google Nexus: 4, 5, 6, 7 (2013)
BlackBerry: Priv
Q: Can I leave my phone on the charger forever or do I need to remove?
A: Yes, it will limit the power once fully charged.
Q: Can the rear USB ports charge?
A: Yes, but it’s going to be slower than the front USB ports. The rear USB ports are best for data transfer devices such as keyboard, mouse or USB Memory Drives.
Q: Can you charge multiple devices at once on the wireless charger?
A: No, however you can still utilize the USB ports to charge additional devices. The front two USB ports will provide the quickest charge.
Q: How do you clean the wireless charging station?
A: Use a soft, clean, dry cloth.
29
12-11-17
Q: Can I use my own power supply?
A: No, you must use the power supply provided.
Q: What does the LED indicator light mean on the front?
A: The white light means that your phone is charging.
Q: What does a blinking indicator light mean?
A: Foreign object – not a Qi-enabled device is located on the charging pad.
SIT-STAND TRAINING MANUAL
30
| FAQ - LOTUS™ DX
12-11-17
WARRANTIES
Fellowes, Inc. (“Fellowes”) warrants the Lotus™ DX (“Product”) to be free from defects in material and workmanship for the time period as set forth below.
• All of the USB and wireless charging components for a period of one (1) year from the date of original purchase of the product.• All other parts for a period of five (5) years from the date of original purchase of the product.
This warranty applies only to the initial retail purchaser and does not cover claims resulting from misuse, failure to follow instructions on installation and use, neglect, use of unauthorized attachments, commercial use, use on a current or voltage other than specified on the product, or unauthorized service during the warranty period on conditions otherwise covered by warranty.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS EXPRESSLY LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
UNLESS REQUIRED BY APPLICABLE LAW, THE CUSTOMER’S EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY OR OF ANY OTHER OBLIGATION ARISING BY OPERATION OF LAW OR OTHERWISE SHALL BE LIMITED AS SPECIFIED HEREIN TO REPAIR, REPLACEMENT OR A REFUND OF THE PURCHASE PRICE, AT THE COMPANY’S SOLE OPTION.
UNDER NO CIRCUMSTANCE WILL THE COMPANY, ITS AFFILIATES, SUBSIDIARIES, RELATED ENTITIES, RESELLERS OR THEIR RESPECTIVE OFFICERS, DIRECTORS OR EMPLOYEES OR THOSE PERSONS FOR WHOM THEY ARE BY LAW RESPONSIBLE, BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUBSTAINED IN CONNECTION WITH THE PRODUCT. THE COMPANY AND THESE OTHER PARTIES DO NOT ASSUME OR AUTHORIZE ANY REPRESENTATIVE OR OTHER PERSON TO ASSUME FOR ANY OF THEM ANY OBLIGATION OR LIABILITY OTHER THAN AS IS EXPRESSLY SET FORTH HEREIN.
The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law.
31
1-19-17
Lotus™ Sit Stand Workstation 0007901/0009901
FAQ
Q: Is there assembly required?
A: No, the workstation comes fully assembled out of the box.
Q: How much weight can the Lotus sit stand hold?
A: It can hold up to 35lbs total; 30lbs on the top platform and 5lbs on the keyboard platform. We would not recommend using the product with less than 10lbs. You can adjust the tension with our patent-pending Smooth Lift Technology™ to offset the weight of your equipment and accessories (between 10 – 35lbs).
Q: Can you fit two monitors on the top surface?
A: Monitors may have slightly different sized bases and frames, but if you are using a modern monitor from one of the large manufacturers, you should be able to fit two monitors side by side up to 24”.
Q: Does the Lotus Sit Stand need to be fastened to the desk?
A: No, the Lotus was designed as a stand-alone sit stand that can sit on top of the desk and has been BIFMA tested to ensure stability. The workstation should be placed on a flat surface that can accommodate the entire width and depth of the product without overhang.
Q: I’m concerned it might damage my desk.
A: The Lotus has rubber feet that help protect the desk from scratching the surface of your desk.
Q: What’s the minimum size of desk required to successfully install this product?
A: The Lotus should be placed on a sturdy, flat surface at least 26.25” deep and 33.75” wide to have sufficient space for the product.
SIT-STAND TRAINING MANUAL
32
FAQ Lotus™ Sit Stand Workstation 0007901/0009901
| FAQ - LOTUS™
1-19-17
Q: How stable is the keyboard platform when typing?
A: Under normal use, the platform is stable. If you want to maximize the durability of the product, please do not lean or apply excessive force to the keyboard platform.
Q: I can’t understand how to adjust the Smooth Lift Technology™ (patent pending), can you explain it to me?
Refer to the Fellowes® Lotus™ Sit Stand Workstation - Smooth Lift Technology Video
A: Ensure your workstation is raised to the highest position and all of your items are placed on it. As per the image below, turn the knob clockwise (toward the + sign) to offset heavier weights and counter clockwise (towards the – sign) to offset lighter weights. Lotus is shipped at the lowest setting which will help offset 10lbs. To get to the highest setting which will help offset 35lbs is 29 full rotations. *For example, if you have two monitors that weigh 11lbs each and a keyboard and mouse that combined weigh 1.5lbs, you would turn the knob clockwise approximately 10 full rotations*. The exact number of rotations depends on your personal comfort raising and lowering the platform. Once you have properly adjusted the Lotus, it should feel effortless to raise and lower.
*This is just a guideline – every person will have a different preference.
33
1-19-17
Q: I did not line up my Velcro properly the first time and now it’s not usable. Can I have more sent to me? Is there a product you would recommend to replace?
A: These are meant for single use as specified in the manual. We have spare parts for purchase that we can supply. You could also go to your local hardware store and purchase adhesive discs (3.5mm).
Q: How does the cord funnel attach to the Lotus sit stand?
Refer to the Fellowes® Lotus™ Sit Stand Workstation - Cord Management Video
A: There are three locations in the rear cord channel that you can choose from. Find the slot that will best accommodate your setup and place the cord funnel into the slot. You will feel it magnetically attach to the Lotus. The cord funnel should now be in place.
Q: How can I apply the cable zip using the cable zip tool?
Refer to the Fellowes® Lotus™ Sit Stand Workstation - Cord Management Video
A: Refer to step 3 in the instruction manual. First you will need to clamp the cable zip tool around all cords below the cord funnel (make sure the arrow on the cable zip tool is pointing upward). Next, take the cable zip and push upward into the tool so that the cable zip beings wrapping around the tool. Make sure the seam of the cable is facing the tool. Once it’s started, pull downward on the cable zip tool while holding the top of the cable zip. Continue sliding the tool until all cords are in the cable zip.
SIT-STAND TRAINING MANUAL
34
| FAQ - LOTUS™
1-19-17
Q: How long should the power cables be?
A: Most cable lengths are an average of 6.5ft, which should be sufficient for working when standing however it would be important to consider where the power sockets are located. The sit stand raises 17” above the desk. Have the Lotus in the highest position when putting items on to ensure proper cord length.
Q: What is the best way to clean the Lotus Workstation?
A: Use a soft cloth with any surface cleaner.
35
1-19-17
WARRANTIES
Q: What is the warranty length?
A: 5 years
Fellowes, Inc. (the “Company”) warrants this product to be free from defects in material and workmanship appearing within 5 years from the date of the original purchase of the product. If such a defect appears during the warranty period, the Company will (at its sole option) either repair or replace the defective product with no charge for service or parts or refund the purchase price.
This warranty applies only to the initial retail purchaser and does not cover claims resulting from misuse, failure to follow instructions on installation and use, neglect, use of unauthorizedattachments, commercial use, use on a current or voltage other than specified on the product, or unauthorized service during the warranty period on conditions otherwise covered by the warranty.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS EXPRESSLY LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
UNLESS REQUIRED BY APPLICABLE LAW, THE CUSTOMER’S EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY OR OF ANY OTHER OBLIGATION ARISING BY OPERATION OF LAW OR OTHERWISE SHALL BE LIMITED AS SPECIFIED HEREIN TO REPAIR, REPLACEMENT OR A REFUND OF THE PURCHASE PRICE, AT THE COMPANY’S SOLE OPTION.
UNDER NO CIRCUMSTANCE WILL THE COMPANY, ITS AFFILIATES, SUBSIDIARIES, RELATED ENTITIES, RESELLERS OR THEIR RESPECTIVE OFFICERS, DIRECTORS OR EMPLOYEES OR THOSE PERSONS FOR WHOM THEY ARE BY LAW RESPONSIBLE, BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUSTAINED IN CONNECTION WITH THE PRODUCT. THE COMPANY AND THESE OTHER PARTIES DO NOT ASSUME OR AUTHORIZE ANY REPRESENTATIVE OR OTHER PERSON TO ASSUME FOR ANY OF THEM ANY OBLIGATION OR LIABILITY OTHER THAN AS IS EXPRESSLY SET FORTH HEREIN.
The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law.
Australia Residents Only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired orreplaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits under Fellowes’ Warranty are in addition to other rights and remedies under a law in relation to the machine.
SIT-STAND TRAINING MANUAL
36
| FAQ - LOTUS™
This Page is blank
37
12-11-17
Lotus™ VE Sit-Stand Workstation 8080101/8082001
FAQ
Q: Is there assembly required?
A: Yes there is limited assembly required which should take anywhere from 10-20 minutes. There are only 4 major pieces that need to be assembled together (see assembly video below).
Lotus VE Assembly Video
Q: How much weight can the Lotus VE sit stand hold?
A: It can hold up to 25lbs total; 20lbs on the top platform / monitor arm(s) and 5lbs on the keyboard platform.
Q: What size monitor can the Lotus VE hold?
A: The only restriction the single monitor version has is the 20lbs weight limit. The Dual version can accommodate up to 25” diagonal screens with combined weight of 20lbs.
Q: Does the Lotus VE Sit Stand need to be fastened to the desk?
A: Yes it clamps to the rear of the desk (1” – 3 1/8”) thick.
Q: My desk is < 3 1/8” thick and the clamp won’t fit, what am I doing wrong?
A: You will need to flip the base clamp by removing the two bolts and reinstalling. Refer to step 2 in the instruction manual.
SIT-STAND TRAINING MANUAL
38
FAQ Lotus™ VE Sit-Stand Workstation 8080101/8082001
| FAQ - LOTUS™ VE
12-11-17
Q: I’m concerned it might damage my desk.
A: The clamp and platform have rubber/foam pads that help protect the desk from scratching the surface of your desk.
Q: How stable is the keyboard platform when typing?
A: Under normal use, the platform is stable. If you want to maximize the durability of the product, please do not lean or apply excessive force to the keyboard platform.
Q: What’s the minimum size of desk required to successfully install this product?
A: The Lotus should be placed on a sturdy, flat surface at least 24” deep and 28.75” wide to have sufficient space for the product. There are 3 depth adjustments which you can choose from when assembling the product. These allow the front edge of the work surface to sit flush with desk depths 23.6”, 27.5” and 31.5”.
12-11-17
Q: I’m concerned it might damage my desk.
A: The clamp and platform have rubber/foam pads that help protect the desk from scratching the surface of your desk.
Q: How stable is the keyboard platform when typing?
A: Under normal use, the platform is stable. If you want to maximize the durability of the product, please do not lean or apply excessive force to the keyboard platform.
Q: What’s the minimum size of desk required to successfully install this product?
A: The Lotus should be placed on a sturdy, flat surface at least 24” deep and 28.75” wide to have sufficient space for the product. There are 3 depth adjustments which you can choose from when assembling the product. These allow the front edge of the work surface to sit flush with desk depths 23.6”, 27.5” and 31.5”.
39
12-11-17
Q: How long should the power cables be?
A: Most cable lengths are an average of 6.5ft, which should be sufficient for working when standing however it would be important to consider where the power sockets are located. The sit stand raises 15” above the desk. Have the Lotus VE in the highest position when putting items on to ensure proper cord length.
Lotus VE Cord Management Video
Q: What is the best way to clean the Lotus Workstation?
A: Use a soft, clean, dry cloth.
Q: It’s too difficult to adjust my monitor when mounted to the VESA plate.
A: Use the two provided Hex Wrenches to adjust the bolts on the sides of the VESA plate. Refer to step 6 of the instruction manual.
SIT-STAND TRAINING MANUAL
40
| FAQ - LOTUS™ VE
12-11-17
WARRANTIES
Q: What is the warranty length?
A: 5 years
Fellowes, Inc. (the “Company”) warrants this product to be free from defects in material and workmanship appearing within 5 years from the date of the original purchase of the product. If such a defect appears during the warranty period, the Company will (at its sole option) either repair or replace the defective product with no charge for service or parts or refund the purchase price.
This warranty applies only to the initial retail purchaser and does not cover claims resulting from misuse, failure to follow instructions on installation and use, neglect, use of unauthorized attachments, commercial use, use on a current or voltage other than specified on the product, or unauthorized service during the warranty period on conditions otherwise covered by the warranty.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS EXPRESSLY LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
UNLESS REQUIRED BY APPLICABLE LAW, THE CUSTOMER’S EXCLUSIVE REMEDY FOR BREACH OF THIS WARRANTY OR ANY IMPLIED WARRANTY OR OF ANY OTHER OBLIGATION ARISING BY OPERATION OF LAW OR OTHERWISE SHALL BE LIMITED AS SPECIFIED HEREIN TO REPAIR, REPLACEMENT OR A REFUND OF THE PURCHASE PRICE, AT THE COMPANY’S SOLE OPTION.
UNDER NO CIRCUMSTANCE WILL THE COMPANY, ITS AFFILIATES, SUBSIDIARIES, RELATED ENTITIES, RESELLERS OR THEIR RESPECTIVE OFFICERS, DIRECTORS OR EMPLOYEES OR THOSE PERSONS FOR WHOM THEY ARE BY LAW RESPONSIBLE, BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUSTAINED IN CONNECTION WITH THE PRODUCT. THE COMPANY AND THESE OTHER PARTIES DO NOT ASSUME OR AUTHORIZE ANY REPRESENTATIVE OR OTHER PERSON TO ASSUME FOR ANY OF THEM ANY OBLIGATION OR LIABILITY OTHER THAN AS IS EXPRESSLY SET FORTH HEREIN.
The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law.
Australia Residents Only:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits under Fellowes’ Warranty are in addition to other rights and remedies under a law in relation to the machine.
41
SIT-STAND TRAINING MANUAL
42
Request a SPASpecial Pricing Authorization.
Special pricing may be available for your bid opportunities!
Staples reps can request bid pricing by contacting your
Fellowes representative.
To make processing your request easier, please
have this information on hand:
� Product description and item number
� Bid volume
� Incumbent model referenced in the Bid (if any)
� Customer inquiring on the Bid - Staples
� End user / consumer
� Bid response date needed
� Product Availability Date – Please indicate if the entire quantity will ship at once or over a period of time
� Ship-To Location = Single location or multiple locations? For multiple locations, is Fellowes expected to drop-ship or will customer coordinate product distribution?
� One-time transaction or contract for period of time?
Your Fellowes representative will submit the bid
and assign the bid number then you’ll be notified
on your new bid pricing.
43
� Full Line Fellowes Sit-Stand Overview
Lotus� Fellowes Lotus Sit-Stand Workstation
� Fellowes Lotus Sit-Stand Workstation featuring Smooth Lift Technology
� Fellowes Lotus Sit-Stand Workstation - Cord Management
� Fellowes Lotus Sit-Stand Workstation - Device Channel
� Fellowes Louts Sit-Stand Workstation - Arm Kits
Lotus DX� Fellowes Lotus DX Sit-Stand Workstation
� Fellowes Lotus DX Sit-Stand Workstation - Charging Station
� Fellowes Lotus DX Sit-Stand Workstation - Cord Management
Lotus VE� Fellowes Lotus VE Sit-Stand Workstation
� Fellowes Lotus VE Sit-Stand Workstation - Assembly
� Fellowes Lotus VE Sit-Stand Workstation - Cord Management
� Fellowes Lotus VE Sit-Stand Workstation - Device Channel
Available Videoshttp://apps.fellowes.com/promos/sitstands
SIT-STAND TRAINING MANUAL
44
Website Resources
SPECGet dimensions, weights
and warranty information
FEATURESOverview of product
features and followed
with the interactive
Product Tour
FIND A RETAILERLearn where you can purchase
SUPPORTDownload product
manuals
RESOURCE CENTERInformation for consumers
on how to create a
healthier workspace
PRODUCT VIDEOSee Lotus in action
PRODUCT REGISTRATIONConsumers can register their
products for easy warranty retrieval
Lotus™ DX Sit-Stand Workstation
1789 Norwood Avenue, Itasca, Illinois 60143 • 1-800-955-0959 • www.fellowes.com
© 2017 Fellowes, Inc. | Part #872352 Rev D
U.S.: 1-800-955-0959Canada: 1-800-665-4339Mexico: 001-800-514-9057
CUSTOMER SERVICE & SUPPORTwww.fellowes.com
PLEASE READ THESE INSTRUCTIONS BEFORE USE. DO NOT DISCARD: KEEP FOR FUTURE REFERENCE.
LIRE CES INSTRUCTIONS AVANT UTILISATION. NE PAS JETER : CONSERVER POUR FUTURE RÉFÉRENCE.
LEA ESTAS INSTRUCCIONES ANTES DE USAR. NO DESECHAR: GUARDAR PARA FUTURA REFERENCIA.
Declaration of Conformity
Fellowes, Inc.
Unit 2 Ontario Drive, New Rossington, Doncaster, DN11 0BF, England declares that the product model Lotus™ DX Sit-Stand Workstation conforms with the requirements of the Restriction of Hazardous Substances Directive (2011/65/EU), the Electromagnetic Compatibility Directive (2014/30/EU), the WEEE directive (2012/19/EU), and below harmonized European EN Standards.
EMC: EN 55032:2015 EN 55024:2010/A1:2015 EN 61000-3-2:2014 EN 61000-3-3:2013
Year Affixed: 17
Itasca, Illinois, USAAugust 1, 2017
John Fellowes
LotusDX_SitStand_872352_RevD_3L_110217.indd 8-1 11/3/17 9:29 AM
2 3
ENGLISHLotus™ DX Sit-Stand Workstation
SAFETY INSTRUCTIONS/WARNING
CONTENTS
Read and follow all instructions and warnings before use.
Only compatible with Fellowes Monitor Arm Kit for Lotus. Visit www.Fellowes.com for more information.
Workstation
Power supply USB cord Power cord
Cord FunnelCable zip/tool
Velcro
STEP 2Place your monitor, keyboard and mouse on the workstation. Use the enclosed Velcro to secure the monitor(s) to the workstation. Leave the monitor cover plate in place unless using the Fellowes Monitor Arm Kit for Lotus.
STEP 3Using both hands, push down slightly and engage both levers to raise the workstation to the highest position.
≤ 13.6 Kg≤ 30 lbs
≤ 2.2 Kg≤ 5 lbs
SET-UP
STEP 1Use 2 people to place the sit stand on your desk. Be sure that the front edge of the keyboard platform aligns with the desk edge.
CAPABILITIES
5
6
71 2 3 4
• WARNING: PINCH POINT! KEEP HANDS CLEAR OF SUPPORT BARS DURING OPERATION. SERIOUS INJURY MAY OCCUR.
• DO NOT EXCEED MAXIMUM STATED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR.
• CAUTION: Lift hazard! Two people are required to move workstation. Serious injury may occur.
• Keep cables clear of support bars during operation, follow the cable routing instruction in this manual. Failure to follow these instructions may result in equipment damage or personal injury.
• DO NOT lean on the keyboard platform.• DO NOT adjust counter balance until all equipment and accessories have been
placed on the workstation.• This product is spring assisted and should never be used with less than 10 lbs.
(4.5kg) of weight. With caution, use both hands to push down slightly and engage both levers. Failure to do so may result in injury or property damage.
• Only compatible with Fellowes Monitor Arm Kit for Lotus. • Make sure the desk or mounting surface is level and can support the combined
weight of the workstation and accessories.
• Remove all equipment and accessories from the workstation before moving.• Manufacturer certifies that product meets or exceeds applicable ANSI/BIFMA
standards.• Use Velcro if not using monitor arms. Velcro is single use.• The Lotus is for charging Qi™ compatible smartphone only. • Only use the power cable and transformer that was supplied with this product.• It is normal for the wireless charging surface to get warm during charging. If
there is an issue while charging, the indicator lights will flash. • Keep flammable materials away from charging surface. • Only use the wireless charger for its intended purpose. Improper use, or use of
incompatible devices may result in a risk of fire, explosion, or other hazard. • DO NOT attempt to charge a device that is damaged or an open battery case or
a device that is not Qi™ compatible.• DO NOT disassemble the wireless charger and USB device.• DO NOT use if power cord or transformer is damaged. • Keep the wireless charging surface clean and dry.• Use a soft, clean, dry cloth to clean the surface of the wireless charger.
Rear USB Hub
Port Description Specifications1 Type B Connector Data Transfer (to computer)2 Barrel Connector Power (8A)3 USB Port (Data Transfer) USB 3.0, 900mA4 USB Port (Data Transfer) USB 3.0, 900mA
Front Panel
5 USB Port (Charging Only) USB 3.0, 2.1A
6 USB Port (Charging Only) USB 3.0, 2.1A
7 Wireless Charging Pad 1A
LotusDX_SitStand_872352_RevD_3L_110217.indd 2-3 11/3/17 9:29 AM
| RESOURCES
45
To contact a Fellowes® service representative,
call 1-800-955-0959 or visit us on the web at www.fellowes.com
There’s more to see at Fellowes.com
Customer Service
SIT-STAND TRAINING MANUAL
46
Does your company currently have sit-stand desks or workstations?
Yes (see below) | No (see page 4)
That’s great – clearly your company understands the importance of movement during the work day. Fellowes
offers a full line of award-winning sit-stand solutions that combine a wealth of research and development
with their deep understanding of the office workspace. Fellowes sit-stands are designed to be easy to use,
adjustable and worry-free, adding up to a better sit-stand experience and one you’ll want to use every day.
Are you/your employees happy with the sit-stands used today?
If yes, would your employees be interested in upgrading their sit-stand experience? Fellowes upgraded their
award-winning Lotus™ sit-stand to include:
� Convenient wireless charging pad for Qi-enabled devices
� Easy front access to integrated 2-port USB charging station
� Built-in Microban® antimicrobial protection fights the growth of bacteria on surfaces
� Premium cord management with rear USB ports for your keyboard and mouse
And the new design keeps the sought after features of the original Lotus™ design including:
� Keep your workstation stable and change positions effortlessly with dual handle design and patent-
pending Smooth Lift Technology™
� Waterfall design allows you to prop up your phone, note pad or documents
� Customize your comfort with 22 different height settings and 17” of vertical adjustment
� Arrives fully assembled—just unpack and get started
� 32.75”W x 24.25”D
If yes, recommend the Lotus™ DX Sit-Stand Workstation
White: Staples No. 2741253, Mfr No. 8080201
Black: Staples No. 2741252, Mfr No. 8080301
If no, would you say your work surfaces are smaller
(< 25” deep x 30”wide) or larger (≥ 25”deep x 35”wide)?
If smaller, go to page 2. If larger, go to page 3.
Sit-Stand Talk TrackPage 1/4
| RESOURCES
47
If smaller, would you be interested in a sit-stand with a unique Ash Wood
Veneer work surface that also provides additional stability?
If yes, recommend Lotus™ VE Sit-Stand Workstation
Single: Staples No. 2750862, Mfr No. 8080101
Dual: Staples No. 5741250, Mfr No. 8082001
� Smooth Lift Technology™ allows you to effortlessly transition from
sitting to standing
� Ash wood veneer top provides unique look and increased stability
� Waterfall design allows you to prop up your phone,
note pad or documents
� Maximize useful space through the compact design and
dual work surfaces
� Convenient channel keeps devices and notes at your fingertips
� Integrated cord management
� Customize your comfort with 15” of vertical adjustment
� 28.75”W x 24”D
If no, Thank you for your time!
Sit-Stand Talk TrackPage 2/4
SIT-STAND TRAINING MANUAL
48
If larger, would you be interested in a sit-stand with wireless charging capabilities and built in USB ports?
If yes, recommend Lotus™ DX Sit-Stand Workstation
White: Staples No. 2741253, Mfr No. 8080201
Black: Staples No. 2741252, Mfr No. 8080301
� Convenient wireless charging pad for Qi-enabled devices*
� Easy front access to integrated 2-port USB charging station
� Customize your comfort with 22 different height settings and 17” of
vertical adjustment
� Keep your workstation stable and change positions effortlessly with
dual handle design and patent-pending Smooth Lift Technology™
� Waterfall design allows you to prop up your phone, note pad or
documents
� Built-in Microban® antimicrobial protection fights the growth of
bacteria on surfaces
� Premium cord management with rear USB ports for your keyboard
and mouse
� Arrives fully assembled—just unpack and get started
� 32.75”W x 24.25”D
If no, recommend Lotus™ Sit-Stand Workstation
White: Staples No. 2344508, Mfr No. 0009901
Black: Staples No. 2344509, Mfr No. 0007901
� Features 22 different height settings and 17” of vertical
adjustment
� Patent-pending Smooth Lift Technology™ keeps your
workstation stable and makes changing positions effortless
� Innovative cord management and device charging slot allow
your entire workspace to move freely with you
� Arrives fully assembled - no complicated instructions, no
mounting, just unpack and get started
� 32.75”W x 24.25”D
Sit-Stand Talk TrackPage 3/4
| RESOURCES
49
No
Is your company open to the benefits of wellness or sit-stand solutions?
Do any of your employees suffer from back pain, fatigue, heart disease or diabetes?
If no, thank you for your time.
If yes,
Fellowes offers a full line of sit-stand solutions that combine a wealth of research and development
with a deep understanding of the office workspace. Fellowes sit-stands are designed to be easy to use,
adjustable and worry-free, adding up to a better sit-stand experience and one you’ll want to use every
day.
Would you say your work surfaces are smaller (< 25” deep x 30”wide) or larger (≥ 25”deep x 35”wide).
If smaller, would you be interested in a sit-stand with a unique Ash Wood Veneer work surface that also
provides additional stability?
(Go to Page 2)
If larger, would you be interested in a sit-stand with wireless charging capabilities and built in USB ports?
(Go to Page 3)
Sit-Stand Talk TrackPage 4/4
SIT-STAND TRAINING MANUAL
50
The Industrial Designers
Society of America - 2017
Bronze in the office category.
FORBES GEARCULTURE
US FINANCE NEWS
BUSINESS INFO
EDUCATIONFINANCE &
INSURANCEMANUFACTURING HEALTHCAREGOVERNMENT
HOSPITALITY &
ENTERTAINMENT
GADGETEER
DWELL
TRENDHUNTER
Founded in 1950, GOOD
DESIGN® remains the most
recognized programs for design
excellence worldwide.
Top Design Award from the
international trade show for
Stationary, Office, School,
Festivity and Creativity products.
Canadian Office Product
Association 2017 Innovative
Product Award of Excellence.
Product Innovation award at
the UK Nemo Dealer Group
2017 Refresh Conference.
Fellowes has won the prestigious
ADEX Platinum Award for Lotus
Sit-Stand Workstation.
6 Design Awards 20 Third Party Reviews
Placements in a Variety of Businesses
Lotus™ in the Marketplace
| LOTUS™ IN THE MARKETPLACE
51
Wins versus the competition
MONTGOMERY COUNTY PUBLIC SCHOOLS: Converted business from Varidesk
Prefer straight movement, functional
space, cord management and
overall sleek look.
LIVE NATION: Won versus Humanscale and
Ergotron. Prefer superior look,
function and cord management.
ALLEGIS GROUP: Converted from Ergotron and Varidesk.
Convinced after using a seed unit.
Perfer user experience.
WINSTON & STRAWN:Converted from Varidesk.
Convinced after using a seed unit.
Perfer user experience.
DSM (NEW JERSEY OFFICE):Converted from Varidesk and Ergotron.
Prefer the device channel, cord
management and extra workspace
Consumer Reviews
Positive User Experience
Consumer Feedback
END USER SURVEY16 end users with a wide range of needs and setups
� In all cases, setup was described to be very easy and fast
� All users said that the raising and lowering was simple and easy
“[I] chose the Lotus over other competitors
for the extra inch or two of usable height”
“Love my phone having
a spot to sit on…”
“It’s great!”
“Met my needs perfectly”
“…easy to set up,
calibrate…”
“The height is adjustable for your comfort.”
“Love it!”
“Exactly what I wanted”
“The appearance and design are perfect.”
SIT-STAND TRAINING MANUAL
52
Worktivity Wellness Seminars
What is Worktivity™?
Healthy Working
Habits Activity
Increased
Productivity
| WORKTIVITY WELLNESS SEMINARS
53
Ask your Fellowes Rep for details about the next event nearest you!
Your customers will learn how to improve their productivity and bottom line
in this educational seminar providing engaging and practical information
about key wellness trends, important ergonomic principles and the essential
elements of wellness in the workspace presented by wellness industry
expert, Natalie Johnson.
Who Should Attend:Anyone who is responsible for maintaining a company’s culture, promotes
and/or leads a wellness program, uses training, or sets product standards to
solve wellness issues.
Your Customers will Learn• To learn about the updated science on health & wellbeing and its
impact on productivity.
• To create simple strategies that focus on movement, health & the environment so employees can work better.
• To quantify what an investment in wellbeing yields with case studies and ideas to implement your own Worktivity Plan.
• To brainstorm strategies that would work in your culture & environment to allow your employees to work better.
Each Company represented will receive a FREE Ergonomic Products Evaluation Kit!
Natalie Johnson is the President of Population Health Consultants, a firm focusing on creating healthy populations and cultures through leadership driven training & initiatives. She works with companies locally and globally to identify ways to align company mission to the importance of overall physical, mental & emotional health. As a Sports Nutritionist, Personal Trainer, Performance Coach and Health Coach, Natalie uses these skills to create comprehensive solutions that start with a buy in from leadership and a wellbeing plan that has purpose.
Natalie JohnsonFounder and President,
Population Health Consultants
SIT-STAND TRAINING MANUAL
54
Lotus™ DX Sit-Stand WorkstationDimensions
US 8080301 / 8080201Europe 8081001 / 8081101
AU 8082101 / 8082201
31.75" / 806mm
32.75" / 832mm
Lowest Position
Highest PositionLBkg
Keyboard platform 5lbs / 2.2kg max weight
1A Wireless Charging Pad
Weight Capacity
Corner Configuration
Monitor weight 30lbs / 13.6kg max
LBkg
17"432mm
4.97"126mm
24.25"616mm
8.14"207mm
5.5"140mm
12.15"309mm
1.5" / 38.1mm 17.92" / 455.21mm
4.33" / 110mm
3.88"98.77mm
4.25"107.95mm
5.5" / 140mm to 22.35" / 568mm
Base Footprint
2 x USB 900mA Data Transfer Ports
2 x USB 2.1A Charging Ports
30.5" / 774.7mm
16" 406.4mm
DimensionsLotus™ DX Sit-Stand Workstation 8080301/8080201
| APPENDIX - DIMENSIONAL DRAWINGS
55
Lotus™ DX Sit-Stand WorkstationDimensions
US 8080301 / 8080201Europe 8081001 / 8081101
AU 8082101 / 8082201
31.75" / 806mm
32.75" / 832mm
Lowest Position
Highest PositionLBkg
Keyboard platform 5lbs / 2.2kg max weight
1A Wireless Charging Pad
Weight Capacity
Corner Configuration
Monitor weight 30lbs / 13.6kg max
LBkg
17"432mm
4.97"126mm
24.25"616mm
8.14"207mm
5.5"140mm
12.15"309mm
1.5" / 38.1mm 17.92" / 455.21mm
4.33" / 110mm
3.88"98.77mm
4.25"107.95mm
5.5" / 140mm to 22.35" / 568mm
Base Footprint
2 x USB 900mA Data Transfer Ports
2 x USB 2.1A Charging Ports
30.5" / 774.7mm
16" 406.4mm
SIT-STAND TRAINING MANUAL
56
Lotus™ Sit Stand WorkstationDimensions
0007901/0009901
©2017 Fellowes, Inc. | Part # 872292 RevB
31.75" / 806mm
32.75" / 832mm
Lowest Position
Highest Position
LBkg
Keyboard platform 5lbs / 2.2kg max weight
Weight CapacityMonitor weight
30lbs / 13.6kg max LBkg
17"432mm
4.97"126mm
24.25"616mm
8.14"207mm
22.35" 568mm
5.5"140mm
12.15"309mm
5.5" / 140mm to 22.35" / 568mm
Base Footprint
30.5” / 774.7mm
16” / 406.4mm
DimensionsLotus™ Sit Stand Workstation 0007901/0009901
| APPENDIX - DIMENSIONAL DRAWINGS
57
Lotus™ Sit Stand WorkstationDimensions
0007901/0009901
©2017 Fellowes, Inc. | Part # 872292 RevB
31.75" / 806mm
32.75" / 832mm
Lowest Position
Highest Position
LBkg
Keyboard platform 5lbs / 2.2kg max weight
Weight CapacityMonitor weight
30lbs / 13.6kg max LBkg
17"432mm
4.97"126mm
24.25"616mm
8.14"207mm
22.35" 568mm
5.5"140mm
12.15"309mm
5.5" / 140mm to 22.35" / 568mm
Base Footprint
30.5” / 774.7mm
16” / 406.4mm
SIT-STAND TRAINING MANUAL
58
DimensionsLotus™ VE Sit-Stand Workstation 8080101Lotus™ VE Sit-Stand Workstation
Single Monitor: Dimensions
8080101
Lowest Position
Highest Position
LBkg
Keyboard platform 5lbs / 2.27kg max weight
Weight CapacityMonitor weight 20lbs / 9.07kg
Maximum monitor size 24" / 60.96cm
LBkg
4.92"125mm
19.92"506mm
0.57"14.50mm
5.49"139.50mm
14.43"366.5mm
42.87" 1089mm
28.44"722.50mm
to42.87"
1089mm
15"381mm
19.92"506mm 14.43"
366.5mm
28.44" 772.50mm
VESA75 x 75
100 x 100
DeskThickness
Min.1" / 25.4mm
Max.3.16" / 80.2mm
28.27" / 718.01mm
28.74" / 730.05mm
7.49"190.37mm
8.93"226.8m
24.02"610mm
Lotus™ VEThickness
| APPENDIX - DIMENSIONAL DRAWINGS
59
Lotus™ VE Sit-Stand WorkstationSingle Monitor: Dimensions
8080101
Will fit desks depths of 23.6" / 600mm,
27.5" / 700mm and 31.5" / 800mm
Monitor Rotation360º
Monitor Tilting+15º / –15º
Desk Clamp
Desk Desk
2.52"63.98mm
1"25.4mm
5.26"133.56mm
2.16"54.83mm
0.65" / 16.42mm
2.95"75.04mm
2.65"67.27mm
3.79"96.393mm
0.42"10.65mm
3.41" / 86.68mm
3.4" / 86.25mm
2.36"59.94mm
3.42" / 86.77mm
Lotus™ VE Sit-Stand WorkstationSingle Monitor: Dimensions
8080101
Will fit desks depths of 23.6" / 600mm,
27.5" / 700mm and 31.5" / 800mm
Monitor Rotation360º
Monitor Tilting+15º / –15º
Desk Clamp
Desk Desk
2.52"63.98mm
1"25.4mm
5.26"133.56mm
2.16"54.83mm
0.65" / 16.42mm
2.95"75.04mm
2.65"67.27mm
3.79"96.393mm
0.42"10.65mm
3.41" / 86.68mm
3.4" / 86.25mm
2.36"59.94mm
3.42" / 86.77mm
SIT-STAND TRAINING MANUAL
60
DimensionsLotus™ VE Sit-Stand Workstation 8082001Lotus™ VE Sit-Stand Workstation
Dual Monitors: Dimensions
8082001
28.27" / 718.01mm
28.74" / 730.05mm
24" / 609.6mm
28" / 723.9mm
Lowest Position
Dual Monitor Arm
Highest Position
LBkg
Keyboard platform 5lbs / 2.27kg max weight
Weight CapacityMonitor weight 20lbs / 9.07kg
Maximum monitor size 24" / 60.96cm
LBkg
4.92"125mm
19.92"506mm
0.57"14.50mm
5.49"139.50mm
14.43"366.5mm
7.49"190.37mm
42.87" 1089mm
8.93"226.8m
7.12" / 181mmAdjustment
7.12" / 181mmAdjustment
28.44"722.50mm
to42.87"
1089mm
15"381mm
19.92"506mm 14.43"
366.5mm
28.44" 772.50mm
VESA75 x 75
100 x 100
DeskThickness
Lotus™ VEThickness
Min.1" / 25.4mm
Max.3.16" / 80.2mm
24.02"610mm
| APPENDIX - DIMENSIONAL DRAWINGS
61
Lotus™ VE Sit-Stand WorkstationDual Monitors: Dimensions
8082001
Will fit desks depths of 23.6" / 600mm,
27.5" / 700mm and 31.5" / 800mm
Monitor Rotation360º
Monitor Tilting+15º / –15º
Desk Clamp
Desk Desk
2.52"63.98mm
1"25.4mm
5.26"133.56mm
2.16"54.83mm
0.65" / 16.42mm
2.95"75.04mm
2.65"67.27mm
3.79"96.393mm
0.42"10.65mm
3.41" / 86.68mm
3.4" / 86.25mm
2.36"59.94mm
3.42" / 86.77mm
Lotus™ VE Sit-Stand WorkstationDual Monitors: Dimensions
8082001
Will fit desks depths of 23.6" / 600mm,
27.5" / 700mm and 31.5" / 800mm
Monitor Rotation360º
Monitor Tilting+15º / –15º
Desk Clamp
Desk Desk
2.52"63.98mm
1"25.4mm
5.26"133.56mm
2.16"54.83mm
0.65" / 16.42mm
2.95"75.04mm
2.65"67.27mm
3.79"96.393mm
0.42"10.65mm
3.41" / 86.68mm
3.4" / 86.25mm
2.36"59.94mm
3.42" / 86.77mm
Lotus™ VE Sit-Stand WorkstationDual Monitors: Dimensions
8082001
28.27" / 718.01mm
28.74" / 730.05mm
24" / 609.6mm
28" / 723.9mm
Lowest Position
Dual Monitor Arm
Highest Position
LBkg
Keyboard platform 5lbs / 2.27kg max weight
Weight CapacityMonitor weight 20lbs / 9.07kg
Maximum monitor size 24" / 60.96cm
LBkg
4.92"125mm
19.92"506mm
0.57"14.50mm
5.49"139.50mm
14.43"366.5mm
7.49"190.37mm
42.87" 1089mm
8.93"226.8m
7.12" / 181mmAdjustment
7.12" / 181mmAdjustment
28.44"722.50mm
to42.87"
1089mm
15"381mm
19.92"506mm 14.43"
366.5mm
28.44" 772.50mm
VESA75 x 75
100 x 100
DeskThickness
Lotus™ VEThickness
Min.1" / 25.4mm
Max.3.16" / 80.2mm
24.02"610mm
© 2018 Fellowes, Inc. | Form # 614 RevB
To order, please visit StaplesAdvantage.com, your online
ordering system or contact your Account Manager.
For more information visit StaplesAdvantage.com/brand/Fellowes