SIP Protection Защита от цепной пилы

INNOVATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg 09

PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 17

FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 35

TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 47

HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 73

SPECIAL APPLICATIONS . . . . . . . . . . .pg 97

FOUL WEATHER . . . . . . . . . . . . . . . . . . . . . . . pg 107

A perfect balance between weight and resistance resulting in the ultimate comfort for the professional user

High-quality range of durable chainsaw protection comprising different styles that match the needs of different end-users

Stretch chainsaw protective clothing for the price-conscious user

Basic range of traditional chainsaw protective clothing for the price-conscious user

We are committed to dress forestry workers tip-top from head to toe, this includes boots, gloves and cuffs and head protection

These products offer chainsaw and non-chainsaw protective solutions for firefighters and intervention teams. Here you will also find brushcutting protective solutions

Protection against all weather conditions

These EN ISO 20471 class 2 2 climbing trousers without chainsaw protection unite the key features of the Progress range. (pg 33)

Innovation outdoor trousers, a pair of exceptionally light, strong and quick drying outdoor trousers. (pg 12)

SHERPA working jacket, a 4-way stretch working jacket for the modern, price-conscious user. (pg 38)

SHERPA chainsaw trousers, 4-way stretch chainsaw trou-sers for the modern, price-conscious user. (pg 39)

Dirt repellent trousers, suitable for warm brushcutting conditions thanks to their very low weight and the waterproof yet breathable reinforcement. (pg 104)

1SSH1SSV

1XHK1XHP

1SRE

NEW IN THIS CATALOGUE

44

The LOGGER boot offers you an all-terrain versatility, providing class 2 chainsaw protection and is completely waterproof and breathable. (pg 75)

Chainsaw cuffs with adjustable elas-tic fastener. (pg 89)

Logger’s working gloves with mechanical resistance to EN 388 3 1 2 2. (pg 86)

Our new BoXer label, your best price-quality guarantee by SIP Protection.

SIP Protection is a partner of the I.S.A.. Check pg 125 - 126.

3SD41SY1 2XA2

BOXER

NEW IN THIS CATALOGUE

55

2

pezafle

pezatecaqua

pezatec

4

Highly durable 2-way stretch fabric.

(93% polyamide - 7% Spandex ± 240g/m2)

A laminated reinforcement that is waterproof and woven with the RIPSTOP method resulting in an excellent resistance. For use in wet and extreme working conditions.

(68% polyester - 32% polyamide - 100% polyurethane coating ± 345g/m2)

2

pezafle

pezatecaqua

pezatec

4Light and supple 4-way stretch microrip fabric with high abrasion resistance.

(92% polyamide - 8% Spandex ± 155g/m2)

Remarkably resistant reinforcement fabric with Kevlar for use in extreme working conditions.

(60% polyamide - 20% para-aramid - 20% polyurethane coating ± 345g/m2)

HV

Hard wearing and very durable 4-way RIPSTOP fabric with an excep-tional abrasion resistance and tensile strength.

(86% high tenacity polyamide Cordura® - 14% spandex ± 240g/m2)

TEXXION HV: 89% PES - 11% Elasthane +/-250gr/m2.

2

pezafle

pezatecaqua

pezatec

4

Very light fabric that nonetheless presents excellent performances in terms of abrasion resistance and tensile strength.

(100% high tenacity polyamide Cordura® ± 150g/m2)

2

pezafle

pezatecaqua

pezatec

4

Very light waterproof fabric that nonetheless presents excellent performances in terms of abrasion resistance and tensile strength.

(100% high tenacity polyamide Cordura® with polyurethane coating ± 200g/m2)

2

pezafle

pezatecaqua

pezatec

4Light and yet very robust 2-way stretch insert fabric.

(94% high tenacity polyamide Cordura® - 6% elasthane ± 200/m2)

QUALITIES & FABRICS

OUR OWN DEVELOPMENTS

66

Fabric that offers an exceptional abrasion and tensile strength performance.

Chainsaw protective yarns that are up to 25% lighter than traditional chainsaw protection.

Shieldfabric protectorShield Pro+fabric protector

Durable finish that is water- and dirt repellent. Very quick-drying.

Highly breathable fabric with inherent anti-bacterial properties that eliminate odour-causing germs.

(100% Sio-cool®LIGHT (polyester) birdeye ± 130 gr/m2)

ARMORTEX® 4-way stretch reinforcement fabric.

(30,7 para-aramid - 60,6% polyamide - 6,5% elasthane - 2,2% polyurethane ± 340g/m2)

Reinforcement fabric that keeps water out and at the same time has a good abrasion resistance.

(100% polyamide - PVC coating ± 255 g/m2)

QUALITIES & FABRICS

Siopor® ULTRA is totally water and windproof, breathable, extremely comfortable, supple and machine washable. The high degree of breathability offers you an excellent comfort, which makes it pleasant to work in all weather conditions.

(100% polyester fabric with 100% PU coating, ± 195 gr/m2)

Flexothane®, a technical fabric that offers you an excellent protec-tion. The polyurethane coating on a stretchable knitted base makes Flexothane® water and windproof, comfortable, noiseless, 150% stretchable, supple, highly tear resistant and machine washable.

FABRICS WE USE

77

INNOVATIONA perfect balance between weight, strength and resistance resulting in the ultimate comfort for the professional user.

The name reveals its purpose: in this range you’ll find boldly innovating products that aim to raise the protection level by improving your comfort.

Our starting point for the development of this range was to create a pair of trousers so light and breathable, you could forget you’re wearing a protection layer.

To reach this objective we combined state-of-the-art materials, for the outer fabric as well as the protection, with an innovative design.

The Pezatec outer fabric consists of 100% polyamide and is, apart from being very light, extremely durable. It is perfectly resistant to abrasion and all kinds of vegetation. On strategic places we have added stretch inserts in Pezaflex (94% polyamide - 6% elasthane) so the trousers follow your movements instead of restricting them. The back of the legs is equipped with a strong mesh fabric to assure optimal ventilation.

For the protection layer we have used blocking material on the basis of Dyneema®, which is exceptionally light but equally as protective as traditional protection material.

The characterizing colour schemes of this range are red-black and black-red.

9

10

INNOVATION RANGE

11

1SPV 1SSV 1SIV 1SKVTROUSERS TROUSERS JACKET JACKETpage 13 page 12 page 14 page 15

STANDARDSEN 381-5 Class 1 - - -

Type A - - -

EN 381-11 Class - - 1 -

EN 340 2003 2003 2003 2003

FEATURESPEZATEC - PEZAFLEX(1) • • • •

Teflon® Shield Pro+ finish • • • •

stretch inserts • • • •

ventilation • - • •

zipped pockets • • • •

DURABILITYabrasion resistantthorn resistantstrength of reinforcements

USEforestry

tree climbing

COLOURScolour ref. 894 Red/Grey 835 Grey/Black 939 Grey/Red 939 Grey/Red

939 Grey/Red

SIZEinner leg length (cm) 82 85 - -

size table (page 125) S-3XL XS-2XL XS-3XL XS-3XL

(1) for composition and/or information please check page 6-7

INN

OVA

TIO

N

12

OUTSIDE • Front fly with zip closure - hook and eye closing and press stud

• 2 inset pockets with zip closure

• Loops for belt

• 1 inset pocket with zip closure on the thigh

• 1 inset pocket with flap and closing with zip closure on the back

• Elasticated waist

• Triple-needle stitching on the back seam to the inside leg

INSIDE • 1 inset smartphone pocket with zip closure on the right thigh

• Elasticated gaiter with metal lace hook to fix on shoe laces

FABRICHigh performance water- and dirt repellent with Teflon® Shield Pro + Pezatec outer fabric (100% high-tenacity polyamide Cordura® ± 155g/m2)

Pezaflex inserts (94% high-tenacity polyamide Cordura® - 6% elasthane ±200g/m2)

Fabulously light climbing trousers. The perfect balance between very light yet robust fabrics that offer an unrivalled flexibility. High performance Pezatex/Pezaflex outer fabric for an excellent durability, with a water & soil repellent Teflon® Shield Pro+ finish. Zippers minimize the infiltration of sawdust on all pockets.

COLOURS835 Grey/Black

SIZEXS - 2XL

1SSV

CLIMBING TROUSERS

2

pezafle

pezatecaqua

pezatec

42

pezafle

pezatecaqua

pezatec

4


EN 381-11

INN

OVA

TIO

N

13

OUTSIDE • Front fly with zip closure - closing by 2 metal buttons

• 2 inset pockets with splash proof zip closure

• 1 pocket for measuring equipment

• 1 inset pocket with splash proof zip closure at the back

• 1 patched pocket with splash proof zip closure on the left thigh

• Elasticated waist with loops for belt - buttons for braces

• Bib in back


INSIDE • Nylnet lining for an optimal wearing comfort (100% polyester)

• Pezatec fabric below on top of the protective inlay (100% high-tenacity polyamide Cordura®)

• 6 layer protective inlay based on Dyneema® yarns

The lightest pair of trousers in our product range! Weighs only 1 kg in a size medium. A combination of Pezatec and stretch Pezaflex results in a very light and comfortable yet resistant fabric with an excellent durability. The Teflon® Shield Pro+ finish makes the fabric water & soil repellent. What is more: our dense mesh inserts guarantee a good ventilation but keep insects and sawdust out just like the splash-proof zippers on all pockets.

COLOURS894 Red/Grey; 939 Grey/Red

FABRICHigh performance water- and dirt repellent with Teflon® Shield Pro + Peza-tec outer fabric (100% high-tenacity polyamide Cordura® ± 155g/m2)

Pezaflex inserts (94% high-tenacity polyamide Cordura® - 6% elasthanne ±200g/m2)

Mesh ventilation (40% polyamide and 60% recycled PET ±230g/m2)

SIZES - 3XL

1SPV

CHAINSAW TROUSERS, CLASS 1 TYPE AEN 381-5

2

pezafle

pezatecaqua

pezatec

42

pezafle

pezatecaqua

pezatec

4


INN

OVA

TIO

N

OUTSIDE • Ergonomic collar

• Zip closure under flap


• 1 patched smartphone pocket on left arm with splash-proof zip closure

• Sleeve narrowing system by touch and close fastening


• Back- and armpit ventilation

• Elongated back tail


• 9 layer arm-, shoulder- and chest protection to EN 381-11

• 1 patched first-aid pocket

In terms of ergonomics, weight and durability this chain-saw jacket is unsurpassed. High performance Pezatec/Pezaflex outer fabric with water & soil repellent Teflon® Shield Pro+ finish. The waterproof Tektor shoulder rein-forcements allow you to carry a chainsaw or logs on your shoulders without tearing the fabric.

COLOURS939 Grey/Red

FABRICHigh performance water- and dirt repellent with Telon Shield Pro + Pezatec outer fabric (100% high-tenacity polyamide Cordura® ± 155g/m2)

Waterproof Tektor reinforcements (68% polyester - 32% polyamide - 100%polyurethane coating ±345g/m2)

SIZEXS - 3XL

EN 381-11

1SIV

CHAINSAW JACKET, CLASS 1

14

2

pezafle

pezatecaqua

pezatec

42

pezafle

pezatecaqua

pezatec

4


INN

OVA

TIO

N

15


• Zip closure under flap







INSIDE • SIOCOOL light comfort cuffs in the sleeves (100% bird-eye polyester±120g/m2)

• 1 patched First-Aid pocket on the left side with zip closure

FABRICHigh performance water- and dirt repellent with Teflon® Shield Pro + Peza-tec outer fabric (100% high-tenacity polyamide Cordura® ± 155g/m2)


Very light yet resistant working jacket in a high perfor-mance Pezatec/Pezaflex outer fabric. Particularly suitable for heavy forestry work. The comfort cuffs prevent the in-filtration of sawdust in the sleeves. The waterproof Tektor shoulder reinforcements allow you to carry a chainsaw or logs on your shoulders without tearing the fabric.

COLOURS939 Grey/Red

SIZEXS - 3XL

1SKV

WORKING JACKETEN 381-11

2

pezafle

pezatecaqua

pezatec

42

pezafle

pezatecaqua

pezatec

4


PROGRESSHigh-quality range of durable chainsaw protection comprising different styles that match the needs of different end-users.

Our Progress range equals durability. Add to this a comfortable stretch fabric and a finish with meticulous attention to detail and you get a high-end product range for professional users.

The Texxion outer fabric combines comfort with an extreme durability. It consists of polyamide Cordura® fibres (86%) that offer a good resistance to abrasion and a good tensile strength. The rip-stop weaving method further reinforces the inherent strength of the fibres.

Thanks to the addition of 14% Spandex fibres our Texxion is a 4-way stretch fabric, which increases your freedom of movement, and consequently your comfort.

In addition, our Texxion outer fabric is water and dirt repellent thanks to the Teflon® Shield Pro+ treatment.

For the protection layer we used blocking material on the basis of Dyneema®, which is exceptionally light but equally as protective as traditional protection material.

The Progress range comprises different styles that are tailored to the needs of different end-users (arborists, foresters…). Every style has received adapted reinforcements such as Armortex® Light, Tektor, Tektor HD or Kevlar Extreme (® Schoeller) to offer extra resistance where needed. The finishing touch of each style also differs; the arborist style for example is equipped with a waterproof smartphone pocket while the Forest and the Forest Extreme styles received a double meter stick pocket with a separate loop for the spark-plug spanner.

The characterizing colour schemes of this range are anthracite – HV orange and red – HV yellow.

17

18


(2) 183 HV Orange/Black830 Red/HV Yellow/Black832 Grey/HV Orange/Black

833 Red/Black834 Khaki/Black835 Grey/Black

907 Red/HV Yellow908 Grey/HV OrangeNS0 Black

1SQP 1SQT 1SNX 1SNA 1SNB 1SNR 1SNS 1SSP 1SSHTROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERSpage 20 page 21 page 23 page 24 page 24 page 25 page 26 page 32 page 33

STANDARDSEN 381-5 Class 1 2 1 1 1 1 1 - -

Type A A A A A A A - -

EN 471 Class - - - - - - 2-2 - -

EN ISO 20471 Class - - - - - - - - 2

EN 340 2003 2003 2003 2003 2003 2003 2003 1998 -

EN 13688 - - - - - - - - •

EN 13758-2 :2003 +A1:2006 - - - - - - 50+ - 50+

FEATURESTEXXION (1) • • • • • • • • •

Teflon® Shield Pro+ finish (1) • • • • - - - - -

ventilation - - • • • • • • •

zipped pockets • • • • • • • • •

DYNEEMA protection weight reduction - - • • • • • - -


USEforestry - -

tree work

brush cutting

COLOURScolour ref. (2) 833 | 834 | 835 833 830 | 832 833 | 835 835 830 | 832 183 833 | 834 | 835 183

SIZEinner leg length (cm) 82 82 82 82 88 82 82 85 85

size table (page 125) XS-3XL XS-3XL XS-3XL XS-3XL S-2XL XS-4XL XS-3XL XS-3XL XS-3XL

PROGRESS RANGE

19

830 Red/HV Yellow/Black831 Khaki/HV Orange/Black832 Grey/HV Orange/Black

907 Red/HV Yellow908 Grey/HV Orange930 Khaki/HV Orange

N05 Black

1SQP 1SQT 1SNX 1SNA 1SNB 1SNR 1SNS 1SSP 1SSHTROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERSpage 20 page 21 page 23 page 24 page 24 page 25 page 26 page 32 page 33

STANDARDSEN 381-5 Class 1 2 1 1 1 1 1 - -

Type A A A A A A A - -

EN 471 Class - - - - - - 2-2 - -

EN ISO 20471 Class - - - - - - - - 2

EN 340 2003 2003 2003 2003 2003 2003 2003 1998 -

EN 13688 - - - - - - - - •

EN 13758-2 :2003 +A1:2006 - - - - - - 50+ - 50+

FEATURESTEXXION (1) • • • • • • • • •

Teflon® Shield Pro+ finish (1) • • • • - - - - -

ventilation - - • • • • • • •

zipped pockets • • • • • • • • •

DYNEEMA protection weight reduction - - • • • • • - -


USEforestry - -

tree work

brush cutting

COLOURScolour ref. (2) 833 | 834 | 835 833 830 | 832 833 | 835 835 830 | 832 183 833 | 834 | 835 183

SIZEinner leg length (cm) 82 82 82 82 88 82 82 85 85

size table (page 125) XS-3XL XS-3XL XS-3XL XS-3XL S-2XL XS-4XL XS-3XL XS-3XL XS-3XL


(2)

1SIS 1SIA 1SLH 1SKP 1SKAJACKET JACKET LINING JACKET JACKETpage 27 page 28 page 29 page 30 page 31

STANDARDSEN 381-11 Class 1 1 - - -

EN 471 Class 2-2 - - - -

EN 340 2003 2003 2003 1998 2003

EN 13758-2 :2006 50+ 50+ 50+

FEATURESTEXXION (1) • • - • •

Teflon® Shield Pro+ finish (1) • • - • •

ventilation • • - • •

zipped pockets • • - • •

DYNEEMA protection weight reduction - - - - -

DURABILITYabrasion resistant -

thorn resistant -

strength of reinforcements -

USEforestry

tree climbing

brush cutting

COLOURScolour ref. (2) 908 907 | 908 N05 830 / 831 / 832 907 / 908 / 930

SIZEsize table (page 125) XS-3XL XS-3XL XS - 3XL S-3XL XS-3XL

The first generation of Progress chainsaw trousers unite the key features of the range. They have been put to the test for several years and created the basis for the other trousers of the range. 4 way rip stop Texxion outer fabric with Teflon® Shield Pro+ finishing, zipped pockets and Armortex® Light stretch reinforcements on the knees and the inside bottom of the leg.

1SQP

CHAINSAW TROUSERS, CLASS 1 TYPE A


• 2 inset pockets with zip closure (top to bottom to close)

• 1 double pocket for phone and measuring equipment or chainsaw file reinforced on the inside


• 1 patched pocket with flap on the thigh


• Back bib with buttons for braces

INSIDE • Polyester - cotton lining (65 % Polyester - 35% Cotton 85g/m2)

• Foam in the back bib for an enhanced comfort

• 6 layer FRONT protective inlay

FABRICHigh performance water- and dirt repellent with Teflon® Shield Pro + full stretch TeXXion (86% High Tenacity polyamide - 14% elasthane ±240g/m2)

Full stretch Armortex® light reinforcements (30,7% para-aramid - 60,6% polyamide - 6,5% elasthane - 2,2% polyurethane ±340g/m2)

COLOURS833 Red/Black; 834 Kakigreen/Black; 835 Grey/Black

SIZEXS - 3XL

EN 381-5

HVARMORTEX®


PR

OG

RES

S

21

Class 2 Progress chainsaw trousers with a very high protection level. This model is based on the succesful 1SQP, but we added extra layers of protective material to meet the EN 381-5 class 2 requirements at 24 m/s.

PR

OG

RES

S

1SQT

CHAINSAW TROUSERS, CLASS 2 TYPE A



• 1 double pocket for phone and measuring equipment or chainsaw file reinforced on the inside






INSIDE • Polyester - cotton lining (65% Polyester - 35% Cotton 85g/m2)


• 8 layer protective inlay



COLOURS833 Red/Black

SIZEXS - 3XL

EN 381-5

21

HVARMORTEX®


PR

OG

RES

S

22




• 1 patched pocket on the thigh with flap with retro-reflective piping

• 1 double pocket for measuring equipment or chainsaw file reinforced on the inside with flap with retro-reflective piping





• Hydura anti-wicking fabric below on top of the protective inlay (100% Polyamide with 100% Polyurethane coating)

• Metal lace hook with elastic to fix on shoe laces

• 6 layer protective inlay based on Dyneema yarns


Reinforcement fabric Tektor HD (60% Polyamide-20% para-aramid-20% polyurethane ±280g/m2)


Extremely resistant trousers that are conceived for the most demanding working conditions. The Tektor HD rein-forcements withstand the impact of high, dense vegetation with entwined branches and thorns, keeping you comfortable at all times. Equipped with these trousers, you will be able to focus on your work instead of struggling with the environment in which you are working.

COLOURS830 Red/HV Yellow/Black; 832 Grey/HV Orange/Black

SIZEXS - 3XL

1SNX

CHAINSAW TROUSERS - FOREST EXTREME, CLASS 1 TYPE A

EN 381-5

PROFI

PR

OG

RES

S

23

HVARMORTEX®


PR

OG

RES

S

24

1SNB

TALL FIT CHAINSAW TROUSERS* WITH SAME SPECIFICATIONS AS 1SNA




• 1 patched smartphone pocket with waterproof lining on the right leg with splash proof zip closure

• Ventilation zip closure on the back of the legs






• Elasticated gaiter with metal lace hook to fix on shoe laces




This pair of trousers has been especially developped for arborists. It combines the key features of the Progress range with several particularities adapted to the needs of arborists: integrated gaiters with a lace hook to fix them and ventilation zippers that don’t get in your way when wearing a safety harness. What’s more, we were able to reduce the weight by using Dyneema® fibres for the protective lining.

COLOURS833 Red/Black; 835 Grey/Black

SIZEXS - 3XL

(*) The inner leg length of the trousers is 88 cm which is 6 cm longer than the basic model 1SNA.

SIZE: S- 2XL

1SNA

CHAINSAW TROUSERS - ARBORIST, CLASS 1 TYPE AEN 381-5

HVARMORTEX®















Waterproof Tektor reinforcements (68% polyester - 32% polyamide - 100% polyurethane coating ±345g/m2)


These trousers offer a perfect balance between comfort and high durability. If you often have to work in difficult circumstances, in thick rubbery bushes covered with thorns plucking at your trousers, the 1SNR is the best imaginable solution for you. The trousers are reinforced with Tektor on the front. Tektor is a waterproof and extremely resistant fabric that will keep you comfortable even in an unforgiving working environment.

COLOURS830 Red/HV Yellow/Black; 832 Grey/HV Orange/Black

SIZEXS - 4XL

PROFI

1SNR

CHAINSAW TROUSERS - FOREST, CLASS 1 TYPE A

EN 381-5

HVARMORTEX®


PR

OG

RES

S

25

PR

OG

RES

S

26













FABRICHigh performance water- and dirt repellent with Teflon® Shield Pro + full stretch TeXXion HV (89% Polyester - 11% elasthane ±250g/m2) outer fabric


High visibility. An essential feature when you are working along or in the vicinity of a road. The 1SNS combines high visibility in accordance with EN 471 with the specific characteristics of the Progress range: comfort and durability. Wearing comfortable clothing increases your well-being and your productivity. That’s why we used the qualities of the Progress range (Armortex® light, Texxion, Teflon® Shield Pro+, ...) for this pair of hi-vis trousers.

COLOURS183 HV Orange/Black

SIZEXS - 3XL

PROFI

1SNS

HI-VIS CHAINSAW TROUSERS, CLASS 1 TYPE AEN 471 EN 13758-2

UPF 50+EN 381-5

HVARMORTEX®


EN 471 EN 13758-2UPF 50+EN 381-5

PR

OG

RES

S

27


• Closure by zip closure and press stud

• 1 vertical inset pocket with zip closure on the chest


• 1 patched smartphone pocket with waterproof lining on the left arm with splash proof zip closure



• Back ventilation and armpit ventilation with zip closure


• 9 layer arm, shoulder-and chest protection to EN 381-11 with additional belly protection


High performance water- and dirt repellent with Teflon® Shield Pro + full stretch TeXXion HV (89% Polyester - 11% elasthane ±250g/m2) outer fabric

Chainsaw jacket that complies to EN 471 and EN 381-11 and provides additional protection on the abdomen. It can be fitted with our innnovative 1SLH linging with integrated harness. When zipped into the jacket this system offers an optimal and very comfortable 2 in 1 protection. The ideal solution for arborists working on a servicing platform.

COLOURS908 Grey/HV Orange

SIZEXS - 3XL

1SIS

HI-VIS CHAINSAW JACKET, CLASS 1

HVShieldfabric protectorShield Pro+fabric protector

EN 471 EN 13758-2UPF 50+EN 381-11

PR

OG

RES

S

28








• Back ventilation and armpit ventilation with zip closure





Chainsaw jacket that complies to EN 381-11 and provides additional protection on the abdomen. It can be fitted with our inn-novative 1SLH linging with integrated harness. When zipped into the jacket this system offers an optimal and very comfortable 2 in 1 protection. The ideal solution for arborists working on a servicing platform.

COLOURS907 Red/HV Yellow; 908 Grey/HV Orange

SIZEXS - 3XL

EN 381-11

1SIA

CHAINSAW JACKET, CLASS 1


EN 13758-2UPF 50+

PR

OG

RES

S

29

Innovative lining with an integrated full body harness with 2 anchor points. When zipped into the jackets 1SIA or 1SIS this sys-tem offers an optimal and very comfortable 2 in 1 protection. The ideal solution for arborists working on a servicing platform.

STEP 3Fix the zippers of the sepa-rate lining into the jacket.

STEP 2Take the harness off and fit it into the lining.

The lining is available in 5 different sizes (XS-3XL).

STEP 1Put on the harness and adjust the buckles where needed to obtain the correct fit.

STEP 4Pull the anchorage points through the openings, pull the lining from the inner waist of the jacket so that the leg straps will appear.

STEP 5Put on the jacket, fasten the snap locks and the harness is ready for use. Whether you prefer to work with a front or back anchorage point. The one-size-fits-all harness is fully detachable for annual inspection.

AWARD

Together with SIOEN, SKALT devel-

oped the SKALT Protectum, a soft-shell

windbreaker with integrated harness for

fall protection. This jacket won the AVAG

Innovation Award in 2012 and gave birth

to the idea of an integrated chainsaw

jacket.

1SLH

INNOVATIVE LINING WITH AN INTEGRATED FULL BODY HARNESSEN 381-11

OUTSIDE • Closure by zip closure

• 2 inset pockets with zip closure on the chest

• 1 patched phone pocket with gusset and closing by touch and close fastening on the left arm

• Sleeve narrowing by press studs


• Detachable sleeves



• Adjustable waist by elastic and press studs




The first generation of Progress working jackets unites all the key features of the range. The detachable sleeves, adjustable waist and back ventilation are additional assets.

COLOURS830 Red/HV Yellow/Black; 831 Kaki/HV Orange/Black; 832 Gre/HV Orange/Black

SIZEXS - 3XL

1SKP


HVARMORTEX®


PR

OG

RES

S

30

The 1SKA, the ultimate matching working jacket in the Progress range. In addition to the key features of the range this jacket has received several clever modificatons which significantly increase the wearing comfort. Meets the demands of both forestry workers and arborists.

WORKING JACKET








• SIOCOOL light comfort cuffs in the sleeves (100% bird-eye polyester ±120g/m2)


• Bi-functional 3D spacer under the shoulders and upper part of the back: ventilation during summer, isolation during winter (100% polyester)

• Adjustable waist by elastic and press studs

COLOURS907 Red/HV Yellow; 908 Grey/HV Orange; 930 Khaki/HV Orange

SIZEXS - 3XL

PROFI

1SKA

EN 381-11




PR

OG

RES

S

31

PR

OG

RES

S

32






• Trousers narrower below by touch and close fastening




INSIDE • Elasticated gaiter with metal lace hook to fix on shoe laces


FABRICHigh performance water- and dirt repellent with Teflon® Shield Pro + full stretch TeXXion (86% High Tenacity poly-amide - 14% elasthane ±240g/m2)

Full stretch Armortex® light reinforcements (30,7% para-ara-mid - 60,6% polyamide - 6,5% elasthane - 2,2% polyure-thane ±340g/m2)

These climbing trousers without chainsaw protection unite the key features of the Progress range. They have proven their value thanks to the 4 way rip stop Texxion outer fabric with Teflon® Shield Pro+ finishing, zipped pockets and Armortex® Light stretch reinforcements on the knees.

COLOURS833 Red/Black; 834 Kakigreen/Black; 835 Grey/Black

SIZEXS - 3XL

1SSP

CLIMBING TROUSERSEN 381-11

HVARMORTEX®


PR

OG

RES

S

33






• Trousers narrower below by touch and close fastening






FABRICHigh performance water- and dirt repellent with Teflon® Shield Pro + full stretch TeXXion HV (89% Polyester - 11% elasthane ±250g/m2) outer fabric


These EN ISO 20471 class 2 climbing trousers without chainsaw protection unite the key features of the Progress range. They have proven their value thanks to the 4 way rip stop Texxion outer fabric with Teflon® Shield Pro+ finishing, zipped pockets and Armortex® Light stretch reinforcements on the knees.

COLOURS183 HV Orange/Black

SIZEXS - 3XL

1SSH

CLIMBING TROUSERSEN 381-11 EN ISO 20471

EN 13758-2UPF 50+

FLEXStretch chainsaw protective clothing for the price-conscious user

A wide range of different styles that have two things in common: very flexible materials that will follow your every move offering you good comfort at economic prices.

Depending on the style the products are equipped with 2-way or 4-way stretch fabrics and a chainsaw protection in 6 or 8 layers.

In this range you’ll find among other things our proven classic the SIP 6.1 trousers, our BoXer Flex trousers and our newly launched Sherpa style.

This range consists of different colour schemes depending on the style.

35

FLEX

3636

1XHP 1XSP 1SCQ 1SQA 1SQB 1SPU 1XHK 1XSK 1SI7TROUSERS TROUSERS COVERALL TROUSERS TROUSERS TROUSERS JACKET JACKET JACKETpage 39 page 41 page 43 page 44 page 44 page 44 page 38 page 40 page 42

STANDARDSEN 381-5 Class 1 1 1 1 1 1 - - -

Type A A A A A A(1) - - -

EN 381-11 Class - - - - - - - - 1(2)

EN 340 2003 2003 2003 2003 2003 2003 2003 2003 2003

EN 13758-2 :2006 - - - - - - - - 50+

FEATURESFreedom2(3) - • • • • • - • •

Freedom4 (3) • - - - - - • - -

PESATEC AQUA(3) • - - - - - • - -

Teflon® Shield Pro+ finish(3) • - - - - - • - -

Ventilation - - - - - - • • •

zipped pockets • - - - - - • - -

BOXER(4) • • - - - - • • -

DURABILITYabrasion resistantthorn resistantstrength of reinforcements - -

USEforestry

tree climbing

brush cutting - - - - - - -

COLOURScolour ref. (5) N15 | R16 907 907 684 684 835 980 | 907 907 684

SIZEinner leg length (cm) 82 80-88 84 78 84 78 - - -

size table (page 125) XS-3XL XS-3XL XS-3XL XS-3XL S-3XL S-3XL S-3XL S-2XL S-3XL

(1) with additional calf protection (5)(2) with belly protection(3) for composition and/or information please check page 6-7(4) best price guarantee in the SIP PROTECTION range

N15 BlackR16 Red684 Black/HV Yellow

835 Grey/Black980 Black/Royal Blue907 Red/HV Yellow

FLEX RANGE

37

FLEX


• Full front zip closure

• 2 inset pockets with splash proof zip closure,1 patched smartphone pocket on left arm with splash-proof zip closure






FABRICHigh performance water- and dirt repellent with Teflon® Shield Pro+ micro-rip full stretch outer fabric (92% polyamide - 8% spandex ± 155g/m2)

Waterproof Pezatec reinforcements with retro-reflective piping on the shoulders (100% high tenacity polyamide Cordura® with 100% polyurethane coating ±200m2)

The Sherpa jacket can rely on the high quality and good name of SIP Protection and this for an un-beatable price. It is made of a 4-way stretch micro-rip fabric that is resistant and very comfortable to wear. The waterproof Pezatec shoulder reinforcements are an extra asset.

COLOURS907 Red/HV Yellow, 980 Black/Royal Blue

SIZES - 3XL

1XHK

WORKING JACKET - SHERPAEN 381-11

2

pezafle

pezatecaqua

pezatec

4 Shieldfabric protectorShield Pro+fabric protector

2

pezafle

pezatecaqua

pezatec

4

FLEX

38



• 1 ruler pocket

• 1 patched pocket with zip closure on the left thigh

• Coated and waterproof reinforcement on the front and below on the back of the trousers (100% Cordura® with 100% polyurethane coating ±200g/m2)





• Coated and waterproof anti-wicking reinforcement on top of the protective inlay (100% high tenacity polyamide Cordura® with 100% polyurethane coating)


FABRICMicro-rip full stretch outer fabric (92% polyamide - 8% spandex ± 155g/m2) High performance water- and dirt repellent with Teflon® Shield Pro+

Waterproof Pezatec reinforcements (100% high tenacity polyamide Cordura® with 100% polyurethane coating ±200m2)

The Sherpa trousers can rely on the high quality and good name of SIP Protection and this for an unbeatable price. They are made of a 4-way micro-rip stretch fabric that is resistant and very comfortable to wear. In addition the trousers are remarkably light without being less protective. They don’t hamper you in any way so you can move freely while being fully protected. The waterproof lower leg reinforcements and the anti-wicking system are an extra asset.

COLOURSN15 Black, R16 Red

SIZEXS - 3XL

1XHP

CHAINSAW TROUSERS - SHERPA, CLASS 1 TYPE AEN 381-5

FLEX

2

pezafle

pezatecaqua

pezatec

4 Shieldfabric protectorShield Pro+fabric protector

2

pezafle

pezatecaqua

pezatec

4

FLEX

39

FLEX

40

OUTSIDE • Zip closure

• 1 patched pocket with flap on the front


• Back ventilation


INSIDENylnet lining for an optimal wearing comfort (100% polyester)

FABRICWater repellent 2-way stretch Freedom2 (93% poly-amide - 7% elastane ± 240g/m2) outer fabric

Water repellent 67% polyester - 33% cotton outer fabric ±250g/m2

Working jacket matching the 1XSP chainsaw trousers. Allows you to move freely thanks to the durable 2-way stretch Freedom2 fabric. The HV yellow-red colour pattern is very conspicuous, thus offering a good visibility.

COLOURS907 Red/HV Yellow

SIZEXS - 3XL

1XSK


2

pezafle

pezatecaqua

pezatec

4

FLEX

40

FLEX

41

OUTSIDE • Front fly with zip closure - closing by 1 button

• 2 inset pockets

• 1 patched pocket with flap on the back




• Double-needle stitching on the back seam to the inside leg




Water resistant Hydura (100% polyamide with polyu-rethane coating ±255g/m2)

Best price guarantee chainsaw trousers made of a 2-way stretch and durable Freedom2 fabric. For those who are looking for a SIP Protection quality product for a very sharp price. The heavy duty Hydura reinforcement on the front assures a high abrasion resistance.


SIZEXS - 3XL

1XSP


2

pezafle

pezatecaqua

pezatec

4

FLEX

41

FLEX


• Zip closure

• 4 patched pockets on the front



• Back- and underarm ventilation





Water repellent 67% polyester - 33% cotton outer fabric ±250g/m2

Chainsaw jacket with additional protection on the abdomen. Protection on the arms, chest and shoulders in accordance with EN 381-11. It is developed to provide additional protection while dismantling trees or working on a servicing platform.

COLOURS684 Black/HV Yellow

SIZES - 3XL

1SI7

CHAINSAW JACKET, CLASS 1EN 381-11

2

pezafle

pezatecaqua

pezatec

4

EN 13758-2UPF 50+

42

FLEX

OUTSIDE • Full front zip closure

• 2 inset pockets + 2 chest pockets

• 1 patched pocket for smartphone or measuring equipment on the right leg with flap and touch and close fastening



• Back ventilation by 2 side gussets + 6 metal ventilation holes




FABRICWater repellent 2-way stretch Freedom2 (93% polyamide - 7% elastane ± 240g/m2) outer fabric

100 % Polyamide fabric with PU coating (±135g/m2)


SIZEXS - 3XL

SLEEVELESS CHAINSAW COVERALL, CLASS 1 TYPE AEN 381-5

This chainsaw coveral combines the comfort of the 1SQA trousers with a sleeveless jacket all-in-one. It keeps your lower back covered and prevents the ingress of sawdust in the trousers.

1SCQ

43

FLEX

44


• 2 inset pockets


• 1 patched pocket for smartphone or measuring equipment on the right leg with flap and touch and close fastening






FABRICWater repellent 2-way stretch Freedom2 93% polyamide - 7% elastane ± 240g/m2 outer fabric


Water repellent Bristol reinforcement (100 % polyester ±160g/m2)

Good value for money chainsaw trousers with an excellent reputation. The dura-ble, 2-way stretch Freedom2 fabric and the full stretch Armortex® Light reinforce-ments offer much comfort.

Tall fit (+6cm) good value for money chainsaw trousers with an excellent rep-utation. The durable, 2-way stretch Free-dom2 fabric and the full stretch Armortex® Light reinforcements offer much comfort.

Good value for money chainsaw trousers with extra calf protection. The durable, 2-way stretch Freedom2 fabric and the full stretch Armortex® Light reinforce-ments offer much comfort.



COLOURS835 Grey/Black

SIZEXS - 3XL

SIZES - 3XL

SIZES - 3XL

1SQB1SQA 1SPU

CHAINSAW TROUSERS, CLASS 1 TYPE AEN 381-5EN 381-5 EN 381-5

6 CM INNER LEG LENGTH ADDED ADDITIONAL CALF PROTECTION

2

pezafle

pezatecaqua

pezatec

42

pezafle

pezatecaqua

pezatec

42

pezafle

pezatecaqua

pezatec

4

ARMORTEX® ARMORTEX® ARMORTEX®

FLEX

45

FLEX

45

TRADITIONBasic range of traditional chainsaw protective clothing for the price- conscious user.

This range consists of all our basic traditional chainsaw protective clothing. Here you will find products with a proven track record from our ever popular 1SP2 trousers to our class 2 chainsaw trousers, the 1SQN and 1SQX.

Depending on the style, the products in this range are made of a solid non-stretch polyester/cotton or polyamide/cotton outer fabric and they are equipped with a chainsaw protection in 6 or 8 layers. The characteristic colour scheme of the Tradition range hasn’t changed over the years: green/orange remains the standard.

Some of our BoXer labelled products can also be found here. The BoXer label guarantees you our best possible price to quality ratio.

47

1SP2 1XTP 1SP3 1SP6 1SPQ 1SPI 1SQX 1ST2 1XT2 1ST6 1SG2 1XTG 1SG3 1SG6 1SC1 1SI1 1XTJ 1XTK 1SQN 1SHN 1SP7 1XIP 1SG7 1XIG 1SJ6 1XIK 1SI5 1SI9 1SP9 1SG9 1ST9TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS LEGGINGS LEGGINGS LEGGINGS BIB & BRACE BIB & BRACE BIB & BRACE BIB & BRACE COVERALL JACKET JACKET JACKET TROUSERS BIB & BRACE TROUSERS TROUSERS BIB & BRACE BIB & BRACE JACKET JACKET JACKET JACKET TROUSERS BIB & BRACE TROUSERSpage 50 page 51 page 52 page 52 page 52 page 53 page 53 page 54 page 55 page 54 page 56 page 57 page 56 page 56 page 59 page 60 page 61 page 61 page 62 page 63 page 64 page 65 page 66 page 66 page 67 page 67 page 68 page 70 page 70 page 71 page 71

STANDARDSEN 381-5 Class 1 1 1 1 1 1 2 - - - - - - - - - - - 2 2 1 1 1 1 - - - - 1 1 1

Type A A A A A(1) A A A A B A A A C A - - - A A A A A A - - - - A A A

EN 381-11 Class - - - - - - - - - - - - - - - 1 1 - - - - - - - - - 1 1 - - -

EN 340 2003 2003 2003 1998 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003

EN 13758-2 :2006 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EN 471 - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2 2-2 2-2 2-2

FEATURESpolyester cotton • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

polyamide cotton front - - - - - - - - - - - - - - - - - - • • • • • • • • • - - - -

Hydura reinforcements(2) - - - - - • - - - - - - - - - - - - • • - - - - - - - - - - -

Ventilation - - - - - - • - - - - - - - • • • • - - - - - - • • • • - - -

BOXER(3) - • - - - - - - • - - • - - - - • • - - - • - • - • - - - - -

DURABILITYabrasion resistantthorn resistantstrength of reinforcements - - - - - - - - - - - - - - - - - - - - - - - - - - - -

USEforestry

tree climbing

brush cutting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

COLOURScolour ref. (4) 503 506 503 503 508 506 506 503 G75 503 503 506 503 503 503 503 506 506 716 716 526 526 526 526 526 526 526 FC1 | FY1 FC1 | FY1 FC1 | FY1 FC1 | FY1

SIZEinner leg length (cm) 78 80-88 84 80,5/82 78 78 86 78 80 78 78 80-88 84 84 84 - - - 78 78 80-89 80-88 80-89 80-88 - - - - 78 78 78

size table (page 125) XS-4XL XS-4XL S-3XL XS-3XL XS-3XL XS-4XL S-3XL UNI UNI UNI XS-4XL XS-4XL XS-3XL S-4XL XS-4XL XS-4XL XS-4XL XS-3XL S-3XL S-3XL S-3XL XS-4XL XS-4XL XS-4XL XS-3XL XS-4XL XS-4XL XS-4XL S-3XL S-4XL UNI

(1) +5cm outside left leg (4)(2) for composition and/or information please check page 6(3) best price guarantee in the SIP PROTECTION range

503 Green/Orange506 Green/HV Orange508 Green/HV Yellow526 Green/HV Orange

716 Green/HV YellowFC1 HV OrangeFY1 HV Yellow

TRADITION RANGE

48

1SP2 1XTP 1SP3 1SP6 1SPQ 1SPI 1SQX 1ST2 1XT2 1ST6 1SG2 1XTG 1SG3 1SG6 1SC1 1SI1 1XTJ 1XTK 1SQN 1SHN 1SP7 1XIP 1SG7 1XIG 1SJ6 1XIK 1SI5 1SI9 1SP9 1SG9 1ST9TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS TROUSERS LEGGINGS LEGGINGS LEGGINGS BIB & BRACE BIB & BRACE BIB & BRACE BIB & BRACE COVERALL JACKET JACKET JACKET TROUSERS BIB & BRACE TROUSERS TROUSERS BIB & BRACE BIB & BRACE JACKET JACKET JACKET JACKET TROUSERS BIB & BRACE TROUSERSpage 50 page 51 page 52 page 52 page 52 page 53 page 53 page 54 page 55 page 54 page 56 page 57 page 56 page 56 page 59 page 60 page 61 page 61 page 62 page 63 page 64 page 65 page 66 page 66 page 67 page 67 page 68 page 70 page 70 page 71 page 71

STANDARDSEN 381-5 Class 1 1 1 1 1 1 2 - - - - - - - - - - - 2 2 1 1 1 1 - - - - 1 1 1

Type A A A A A(1) A A A A B A A A C A - - - A A A A A A - - - - A A A

EN 381-11 Class - - - - - - - - - - - - - - - 1 1 - - - - - - - - - 1 1 - - -

EN 340 2003 2003 2003 1998 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003 2003

EN 13758-2 :2006 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

EN 471 - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2 2-2 2-2 2-2

FEATURESpolyester cotton • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

polyamide cotton front - - - - - - - - - - - - - - - - - - • • • • • • • • • - - - -

Hydura reinforcements(2) - - - - - • - - - - - - - - - - - - • • - - - - - - - - - - -

Ventilation - - - - - - • - - - - - - - • • • • - - - - - - • • • • - - -

BOXER(3) - • - - - - - - • - - • - - - - • • - - - • - • - • - - - - -

DURABILITYabrasion resistantthorn resistantstrength of reinforcements - - - - - - - - - - - - - - - - - - - - - - - - - - - -

USEforestry

tree climbing

brush cutting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

COLOURScolour ref. (4) 503 506 503 503 508 506 506 503 G75 503 503 506 503 503 503 503 506 506 716 716 526 526 526 526 526 526 526 FC1 | FY1 FC1 | FY1 FC1 | FY1 FC1 | FY1

SIZEinner leg length (cm) 78 80-88 84 80,5/82 78 78 86 78 80 78 78 80-88 84 84 84 - - - 78 78 80-89 80-88 80-89 80-88 - - - - 78 78 78

size table (page 125) XS-4XL XS-4XL S-3XL XS-3XL XS-3XL XS-4XL S-3XL UNI UNI UNI XS-4XL XS-4XL XS-3XL S-4XL XS-4XL XS-4XL XS-4XL XS-3XL S-3XL S-3XL S-3XL XS-4XL XS-4XL XS-4XL XS-3XL XS-4XL XS-4XL XS-4XL S-3XL S-4XL UNI

49


• 2 inset pockets

• 1 patched pocket with flap and closure by press studs on the back







FABRICWater repellent 65% Polyester - 35% cotton outer fabric ± 245g/m2

Traditional chainsaw trousers with a proven track record. Extremely resistant thanks to the robust PES/COT outer fabric and the classic SIP Protection triple needle stitching in the back seam.

COLOURS503 Green/Orange

SIZEXS - 4XL

1SP2


TRA

DIT

ION

50


• 2 inset pockets









Best price guarantee traditional chainsaw trousers from SIP Protection.

COLOURS506 Green/HV Orange

SIZEXS - 4XL


1XTP

TRA

DTI

ON

51

TRA

DIT

ION

52

SAME FEATURES AS 1SP2+ 6cm inner leg length added

SIZES - 3XL

SAME FEATURES AS 1SP2+ 360° (type C) protection

SIZEXS - 3XL

SAME FEATURES AS 1SP2+ 5 cm extra protection on the outside left leg

SIZEXS - 3XL

Tall fit traditional chainsaw trousers with a proven track record. Extremely resist-ant thanks to the robust PES/COT outer fabric and the classic SIP Protection triple needle stitching in the back seam.

Traditional chainsaw trousers offering an all-round protection. Extremely resistant thanks to the robust PES/COT outer fab-ric and the classic SIP Protection triple needle stitching in the back seam.

Extra protective traditional chainsaw trousers with a proven track record. On the outside of the left leg, a high-risk zone, we fitted the trousers with 5 cm of additional protection. Extremely resistant thanks to the robust PES/COT outer fabric and the classic SIP Protection triple needle stitching in the back seam.



COLOURS508 Green/HV Yellow

1SP61SP3 1SPQ

CHAINSAW TROUSERS CLASS 1 TYPE C

CHAINSAW TROUSERS CLASS 1 TYPE A


EN 381-5EN 381-5 EN 381-5

360° (TYPE C) PROTECTION6 CM INNER LEG LENGTH ADDED 5 CM EXTRA PROTECTION ON THE OUTSIDE LEFT LEG

TRA

DTI

ON

SAME FEATURES AS 1SP2+ HYDURA reinforcements in the knee area

+ anti-wicking reinforcement on the bottom of the trousers

+ stretchable crotch to increase free movement

+ double pocket for measuring equipment

SIZEXS - 4XL

SAME FEATURES AS 1SP2+ chainsaw protection Class 2 (24m/s)

+ large ventilation mesh on the back of the legs


SIZES - 3XL

Traditional chainsaw trousers reinforced with Hydura inserts. Extremely resistant thanks to the robust PES/COT outer fabric and the classic SIP Protection triple needle stitching in the back seam. The elasticated crotch allows the wearer a maximum freedom of movement.

Traditional class 2 chainsaw trousers with a proven track record. Extremely resistant thanks to the robust PES/COT outer fabric and the classic SIP Protection triple needle stitching in the back seam. The mesh fabric on the back of the legs ensures a good ventilation keeping you comfortable in hot weather.



1SQX1SPI



EN 381-5EN 381-5

CHAINSAW PROTECTION CLASS 2STRETCHABLE CROTCH TO INCREASE FREE MOVEMENT

53

TRA

DIT

ION

54

Traditional one size fits all chainsaw leggings with attached elastic belt. The airy design offers an increased ventilation. Very user-friendly thanks to the smoothly running zipper and the easy buckle closure of the belt.

Traditional one size fits all chainsaw leggings with all-round protection. Closing by means of separate reference leather belt. The airy design offers an increased ventilation. Very user-friendly thanks to the smoothly running zipper.



1ST61ST2

CHAINSAW LEGGINGS, CLASS 1 TYPE BCHAINSAW LEGGINGS, CLASS 1 TYPE AEN 381-5EN 381-5

SIZEUNI

SIZEUNI

OUTSIDE • Zip closure (top to bottom) at the back of the legs

• Loops for belt

• Closing by elasticated belt and buckle

• Possibility to widen with widener 1SX3





• Loops for belt

• Possibility to widen with widener 1SX3




TRA

DTI

ON

Best price guarantee traditional chainsaw leggings. The airy design offers an increased ventilation. Very user-friendly thanks to the smoothly running zipper and the easy buckle closure of the belt.

COLOURSG75 Spruce Green

1XT2

CHAINSAW LEGGINGS, CLASS 1 TYPE AEN 381-5

SIZEUNI

OUTSIDE • Closing by elasticated belt and buckle

• Zip closure (top to bottom to close) at the back of the legs




WIDENER FOR LEGGINGS

This zip-up leg widener can be zipped in our leg-gings. It adds an extra 9 cm to the leggings, so they can fit every size. Sheer practicality!

KEY FEATURES: • can be fitted on leggings 1ST2 and 1ST6

ADVANTAGES OF CHAINSAW LEGGINGS • Increased ventilation

• Easy to put on and easy to take off

• One size fits all whether you are big or small, a legging is designed in such a way it fits nearly all sizes

1SX3

55

TRA

DIT

ION

Traditional chainsaw bib & brace with a proven track record. Extremely resistant thanks to the robust PES/COT outer fab-ric and the classic SIP Protection triple needle stitching in the back seam. Back and front bib are equipped with a large and functional zip-closure pocket.




1SG2

CHAINSAW BIB & BRACE, CLASS 1 TYPE A

CHAINSAW BIB & BRACE, CLASS 1 TYPE A

CHAINSAW BIB & BRACE, CLASS 1 TYPE C

EN 381-5EN 381-5 EN 381-5

SIZEXS - 4XL

SIZEXS - 3XL

SIZES - 4XL

OUTSIDE • Front fly with zip closure • 2 inset pockets • 1 pocket for measuring equipment • Closure at right side of waist by buttons and zip closure • Elasticated waist • 2 elasticated adjustable braces and closing by buckles • Front bib with pocket and right side zip closure • Triple-needle stitching on the back seam to the inside leg • Large back bib




360° (TYPE C) PROTECTION6 CM INNER LEG LENGTH ADDED

Same as 1SG2 + 6cm added leg length. Same as 1SG2 + allround protection.

1SG61SG3

56

TRA

DTI

ON

57

OUTSIDE • Front fly with zipper

• 2 inset pockets


• 1 ruler pocket

• Adjustable waist by buttons on the right hand side


• 2 elasticated adjustable braces with closure by buckles

• Front bib


• Large back bib




Best price guarantee in our SIP PROTECTION range traditional chainsaw bib & brace in spruce green color with a proven track record. Resistant thanks to the robust PES/COT outer fabric.


SIZEXS - 4XL

1XTG

CHAINSAW BIB & BRACE, CLASS 1 TYPE AEN 381-5

TRA

DIT

ION

OUTSIDE • Full front zip closure

• 4 patched pockets (2 on chest and 2 on thighs) with flap and closure by press studs

• 1 patched pocket for measuring equipment

• Back ventilation by 2 side gussets + 6 metal venti-lation holes



• 6 layer protective inlay on the legs + additional protective material on upper part of the arms and shoulders


Traditional coverall with a proven track record. Extremely resistant thanks to the robust PES/COT outer fabric and the classic SIP Protection triple needle stitching in the back seam. Cut resistant reinforcements on the upper arms and shoulders for added protection. Optimal breathability thanks to several ventilation rings and gussets.


SIZEXS - 4XL

1SC1

CHAINSAW COVERALL, CLASS 1 TYPE AEN 381-5

58

TRA

DTI

ON

59

TRA

DTI

ON

59

TRA

DIT

ION

60

OUTSIDE • Short and straight collar

• Closure by zip closure








Traditional chainsaw jacket that offers protection on the arms, chest and shoulders in accordance with EN 381-11. Ergonomic design and ventilation on the back to provide optimum breathability and comfort.


SIZEXS - 4XL

1SI1


TRA

DTI

ON

61

EN 381-11

Best price guarantee traditional working jacket matching the spruce green Tradition range trousers

Best price guarantee traditional chainsaw jacket that offers protection on the arms, chest and shoulders in accordance with EN 381-11

COLOURS506 Green / HV Orange

COLOURS506 Green / HV Orange

1XTK1XTJ

WORKING JACKETCHAINSAW JACKET, CLASS 1

SIZEXS - 4XL

SIZEXS - 3XL


• Zip closure







FABRIC • Water repellent 65% Polyester - 35% cotton outer fabric ± 245g/m2


• Zip closure






FABRIC • Water repellent 65% Polyester - 35% cotton outer fabric ± 245g/m2

EN 381-11

TRA

DIT

ION


• 2 inset pockets

• 1 back pocket with flap closed by touch & close fastener

• 1 double patched pocket for phone and chain file or measuring equipment

• Elasticated waist with loops for belt - buttons for braces | Back bib with buttons for braces




FABRICWater repellent 67% polyester - 33% cotton outer fabric ±250g/m2

Water resistant Hydura (100% polyamide with polyure-thane coating ±255g/m2)

Class 2 chainsaw trousers made of a robust PES/COT outer fabric that is resistant to thorns. Waterproof Hydura reinforcements on the knees.

COLOURS716 Green / HV Yellow

SIZES - 3XL

1SQN


62

TRA

DIT

ION

62

OUTSIDE • Front fly with zipper • 2 inset pockets

• 1 back pocket with flap closed by touch & close fastener • 1 double patched pocket for phone and chain file or measuring equipment

• Closure at right side of waist by buttons and zip closure • Elasticated waist • 2 elasticated adjustable braces with closure by buckles • Front bib with pocket and right side zip closure • Triple-needle stitching on the back seam to the inside leg • Large back bib




Water resistant Hydura (100% polyamide with polyure-thane coating ±255g/m2)

Class 2 chainsaw bib & brace made of a robust PES/COT outer fabric that is resistant to thorns. Waterproof Hydura reinforcements on the knees. Handy cargo pocket on the front to have your accessories at hand.

COLOURS716 Green / HV Yellow

SIZES - 3XL

1SHN

CHAINSAW BIB & BRACE, CLASS 2 TYPE AEN 381-5

TRA

DTI

ON

63

TRA

DIT

ION

64


• 2 inset pockets

• 1 back hip pocket with flap closed by touch & close fastener

• 1 double patched pocket for phone and chain file or measuring equip-ment







FABRICShiny water repellent 45% Polyamide - 55% cotton fabric ±240g/m2 Water repellent 65% Polyester - 35% cotton outer fabric ± 245g/m2

The first generation Innovation chainsaw trousers. The looks of the Tradition range combined with a robust PA/COT fabric on the front. A large number of pockets and the elasticated crotch made these trousers slightly more sophisticated than their counterpart from the Tradition range.


SIZES - 3XL

1SP7


TRA

DTI

ON

65


• 2 inset pockets



• Back bib




FABRICShiny water repellent 45% Polyamide - 55% cotton fabric ±240g/m2

Traditional best price guarantee SIP PROTECTION bottle green chainsaw trousers with a resistant polyamide/cotton front reinforcement


SIZExS - 4XL

1XIP


TRA

DIT

ION

66

Best price guarantee traditional chainsaw bib&brace in a bottle green colour

The first generation Innovation chainsaw bib & brace. The looks of the Tradi-tion range combined with a robust PA/COT fabric on the front. A large number of pockets and the elasticated crotch made this bib& brace slightly more sophisticated than its counterpart from the Tradition range. Back and front bib are equipped with a large and functional zip-closure pocket.



1XIG1SG7

CHAINSAW BIB & BRACE, CLASS 1 TYPE ACHAINSAW BIB & BRACE, CLASS 1 TYPE A

SIZEXS - 4XL

SIZEXS - 4XL

OUTSIDE • Front fly with zipper • 2 inset pockets, 1 double patched pocket for phone and chain file or measuring equipment, 1 patched pocket with flap on the thigh

• Closure at right side of waist by buttons and zip closure • Elasticated waist • 2 elasticated adjustable braces with closure by buckles • Front bib with pocket and right side zip closure • Triple-needle stitching on the back seam to the inside leg • Large back bib

INSIDE • Polyester - cotton lining (65 % Polyester - 35% Cotton 85g/m2) • 8 layer protective inlay

FABRIC • Same as 1SJ6

OUTSIDE • Stretchable crotch • Front bib, front fly • Enlarged back bib for extra kidney protection • Fully elasticated braces with adjusting buckles • Closing at right side waist with buttons • 2 inset pockets, 1 patched back pocket with flap, 1 folding rule pocket • Enlarged back bib for extra kidney protection • Elasticated waistband

INSIDE • Polyester - cotton lining (65 % Polyester - 35% Cotton 85g/m2) • 8 layer FRONT protective inlay

FABRIC • Shiny water repellent 45% Polyamide - 55% cotton fabric ±240g/m2

EN 381-5 EN 381-5

TRA

DTI

ON

67COLOURS526 Green/HV Orange


SIZEXS - 3XL

SIZEXS - 4XL

Best price guarantee traditional working jacket matching the bottle green Tradition range trousers

Working jacket matching the green Innovation range. Robust PA/COT outer fabric for an excellent durability. Numerous pockets to have your accessories at hand.

1XIK1SJ6

WORKING JACKETFORESTRY JACKET

OUTSIDE • Short and straight collar • Closure by zip closure • 3 inset pockets with zip closure on the front, 1 patched phone pocket with gusset and closing by touch and close fastening on the left arm, 1 inset first aid pocket on the left with zip closure

• Sleeve narrowing by press studs • Elasticated waist • Back- and armpit ventilation • Elongated back tail


FABRIC • Shiny water repellent 45% Polyamide - 55% cotton fabric ±240g/m2 • Water repellent 67% polyester - 33% cotton outer fabric ±250g/m2

OUTSIDE • Large fluorescent surface for safety and high visibility • Elongated back tail • Back ventilation with mesh lining • Sleeve narrowing by press studs • Front zipper up to the top of the collar


FABRIC • Shiny water repellent 45% Polyamide - 55% cotton fabric ±240g/m2 • Water repellent 67% polyester - 33% cotton outer fabric ±250g/m2

EN 381-11 EN 381-11

TRA

DIT

ION

68


• Closure by zip closure





• Back- and armpit ventilation Elongated back tail


• 9 layer arm-, shoulderand chest protection to EN 381-11

FABRICShiny water repellent 45% Polyamide - 55% cotton fabric ±240g/m2 Water repellent 67% polyester - 33% cotton outer fabric ±250g/m2

Chainsaw jacket matching the green Innovation range. Robust PA/COT outer fabric for an excellent durability. Provides protec-tion on the arms, chest and schoulders in accordance with EN 381-11. Ergonomic design with gussets and ventilation on the back to provide optimum breathability and comfort.


SIZEXS - 4XL

1SI5


TRA

DTI

ON

69

TRA

DIT

ION

70

EN 381-11

Traditional HI-VIS chainsaw trousers in accordance with EN 471, class 2-2. They received the same styling as our 1SP2 basic model. The robust PES/COT fabric ensures a long service life. A great fit that has proven its worth!

Traditional HI-VIS chainsaw jacket in accordance with EN 471, class 3-2. The jacket offers protection on the arms, chest and shoulders in accordance with EN 381-11. Ergonomic design and ventilation on the back to provide optimum breathability and comfort.

COLOURSFC1 HV Orange, FY1 HV Yellow


1SP91SI9

HI-VIS CHAINSAW TROUSERS, CLASS 1 TYPE AHI-VIS CHAINSAW JACKET, CLASS 1

SIZEXS - 4XL

SIZEXS - 4XL

OUTSIDE • Short and straight collar • Closure by zip closure • 2 inset pockets with zip closure (top to bottom to close) • Sleeve narrowing by press studs • Back ventilation • Elongated back tail

INSIDE • Nylnet lining for an optimal wearing comfort (100% polyester) • 9 layer arm-, shoulder- and chest protection to EN 381-11

FABRIC • Water repellent 67% polyester - 33% cotton outer fabric ±250g/m2

OUTSIDE • Front fly with zip closure - closing by 1 button • 2 inset pockets, 1 patched pocket with flap and closure by press studs on the back, 1 pocket for measuring equipment

• Elasticated waist with loops for belt - buttons for braces • Back bib with buttons for braces • Triple-needle stitching on the back seam to the inside leg

INSIDE • Polyester - cotton lining (65 % Polyester - 35% Cotton 85g/m2) • 8 layer protective inlay


EN 381-5EN 471 EN 471EN 13758-2UPF 50+

TRA

DTI

ON

71

EN 381-5 EN 381-5

Traditional HI-VIS one size fits all chainsaw leggings in accord-ance with EN 471, 471, class 2-2.. Closing by means of separate reference leather belt. The airy design offers an increased venti-lation. Very user-friendly thanks to the smoothly running zipper.

Traditional HI-VIS bib & brace in accordance with EN 471, 471, class 2-2. Extremely resistant thanks to the robust PES/COT outer fabric and the classic SIP Protection triple needle stitching in the back seam. Back and front bib are equipped with a large and functional zip-closure pocket.



1ST91SG9

HI-VIS CHAINSAW LEGGINGS, CLASS 1 TYPE AHI-VIS BIB & BRACE, CLASS 1 TYPE A

SIZES - 4XL

SIZEUNI

OUTSIDE • Front fly with zip closure • 2 inset pockets, 1 pocket for measuring equipment • Closure at right side of waist by buttons and zip closure • Elasticated waist, 2 elasticated adjustable braces and closing by buckles • Front bib with pocket and right side zip closure • Triple-needle stitching on the back seam to the inside leg • Large back bib

INSIDE • Polyester - cotton lining (65% Polyester - 35% Cotton 85g/m2) • 8 layer protective inlay



• Loops for belt




• Polyester - cotton lining (65% Polyester - 35% Cotton 85g/m2)

EN 471 EN 471

HEAD TO TOEAt SIP Protection we are committed to dress forestry workers tip-top from head to toe, this includes boots, gloves and cuffs and head protection.

It is not easy to find a boot that meets every single demand of day to day forestry and tree work, considering that each type of work has its own unique requirements.

By listing the essential features for each type of work we were able to develop the corresponding boots:

1) chainsaw boots need to be extremely comfortable: a whole day work mustn’t come with sore feet and blisters.

2) the footwear must be very hard wearing: forestry environment comes with rocks, branches, ....

3) each type of work demands its own specification.

Gloves are also an important part of the head to toe protection.

Blisters, tears, cuts, abrasions... When working outdoor and using machines such as chainsaws, brush cutters and hedge trimmers, these and similar inconveniences can easily occur when you are not wearing proper gloves.

And last but not least: head protection. The brain is one of the most important organs in our body and yet it is very vulnerable, with the skull being the only part of the body protecting it. Even a minor impact on the skull can have serious consequences.

The best way to protect this vital organ is by wearing proper head protection.

73

3SD4 3SA3 3SB3 3XA1 3SD7 3XB1 3SA5BOOTS BOOTS BOOTS BOOTS BOOTS BOOTS GAITERS

page 75 page 76 page 77 page 78 page 79 page 79 page 79

STANDARDSEN ISO 17249 CLASS 2 CLASS 2 CLASS 2 CLASS 1 CLASS 3 CLASS 3 -

EN ISO 20345 S3(incor-porates SB, FO, heel side closed in, indented sole, E, A, WRU, P)+WR+CI+S-RC+ HI+HRO

S3(incor-porates SB, FO, heel side closed in, in-dented sole, E, A, WRU, P)+S-RA+CI+HI+HRO

E, SRA, FO, SB, CI, A, HRO, P,

WRU

SB, E, FO, CI, A, HRO, WRU

SB, E, SRB, P SB, SRA -

EN 381-9 - - - - - - class 0

FEATURESshaft height(1) ±18,5 ±19cm ±25cm ±21cm - - -

sewn sole - • • - - - -

cemented sole • - - • - - -

breathable and waterproof Cambrelle membrane

• - - - - - -

leather lining - • - - - - -

breathable fabric lining - - - • - - -

SIZE (see pg 125) 38 - 48 36 - 47 38 - 48 39 - 48 39 - 46 38 - 47 39 - 42/43 - 46

(1) varies per size

HEA

D T

O T

OE

75

OUTSIDE • S3 = SB: Safety footwear with toecap resistant to an energy shock of 200 J and a pressure of 1500 daN, sole resistant to hydrocarbons(FO)+ antistatic features(A) + energy absorption of the heel(E)+ closed heel side + water resistant upper(WRU) + anti-perforation sole (P) + indented sole

• Cold insulating sole CI

• Waterproof (WR)

• Slip resistance (SRC)

• Injected nitrile rubber indented sole

• Large heel for optimal stability

• Steel toecap anatomically pre-formed

• Heat Insulation (HI)

• Sole resistant to heat contact (HRO)

• Kevlar anti-perforation sole

INSIDE • 4 layer Cambrelle membrane

• Removable and washable insole

MATERIAL100% full grain 2,2mm thick waterproof cowhide leather

The LOGGER Forestry Boots provide a class 2 chainsaw protection. It’s a multifunctional boot of an impeccable quality that is com-pletely waterproof and breathable thanks to the use of a membrane. The rubber lug outsole assures an excellent traction on smooth as well as rough terrains. Supple enough to comfortably walk in yet firm enough to give you support on rocky grounds and slopes, you no longer need to change shoes when you’re changing terrain: the LOGGER boot offers you an all-terrain versatility.

COLOURS992 Black/Yellow

SIZE38 - 48

3SD4

CHAINSAW BOOTS - LOGGER, CLASS 2EN ISO 17249 EN ISO 20345

HEA

D T

O T

OE

76

OUTSIDE • Slip resistance of the sole (SRA)

• Indented sewn sole

• S3 = SB: Safety footwear with toecap resistant to an energy shock of 200J and a pressure of 1500 daN, sole resistant to hydrocarbons(FO) + antistatic features (A) + energy absorption of the heel (E) + closed heel side + water resistant upper (WRU) + anti-perforation sole (P) + indented sole

• Cold insulation sole (CI)

• HRO Sole resistant to heat contact

INSIDE1mm / 1,2mm thick leather lining, 1 mm thick velvet and high-tenacity textile

MATERIAL100% Nubuck hydrophobic leather 2,0mm - 2,2mm thick

The 3SA3 boots were originally designed for arborists that needed very flexible chainsaw boots. It has now become an allround boot that is equipped with a supple sole and shaft and offers a class 2 chainsaw protection.

COLOURSAS0 Olive Green

SIZE36 - 47

3SA3

CHAINSAW BOOTS, CLASS 2EN ISO 17249 EN ISO 20345

HEA

D T

O T

OE

77

OUTSIDE • Energy absorption of the heel (E)

• Slip resistance of the sole (SRA)

• Sole resistant to hydrocarbons (FO)

• Indented sewn soleSteel toecap with impact resistance of 200J and compression of 1500 daN


• Anti-static sole A

• Sole resistant to heat contact HRO

• Anti-perforation sole (P)

• Water Resistant Upper WRU

INSIDEAQUASTOP membrane

MATERIALFull grain hydrophobic and oil repellent leather 2,2mm - 2,4mm thick

The waterproof 3SB3 boots really prove to be as solid as they look. Very strong leather, a rock solid sewn outer sole (slightly flexible), extremely resistant laces and steel toe cap: this chainsaw boot was especially designed for working circumstances demanding extreme durability such as rocky slopes. Once adapted to your feet, they will not disappoint you.

COLOURS736 Black/Red

SIZE38 - 48

3SB3

CHAINSAW BOOTS, CLASS 2EN ISO 17249EN ISO 17249 EN ISO 20345

HEA

D T

O T

OE

78


• Sole resistant to hydrocarbons (FO)


• Basic requirements+steel toecap with impact resistance of 200J and compression of 1500 daN (SB)


• Anti-static sole A

• Sole resistant to heat contact HRO

• Water Resistant Upper WRU

INSIDEBreathable fabric lining

MATERIAL100% full grain leather 2.0mm – 2.2mm

These boots meet the demands of occassional users. They are made of a very strong hydrophobic leather, have a medium-high shaft with good pliability and a flexible sole with a great shock absorption.

COLOURS736 Black/Red

SIZE39 - 48

3XA1

CHAINSAW BOOTS, CLASS 1EN ISO 17249 EN ISO 20345

HEA

D T

O T

OE

79

OUTSIDEMetal cable with adjustable strap for firm fixing around the boots

INSIDE6 layer protective inlay

MATERIAL100% leather and 65% Polyester - 35% cotton outer fabric ± 245g/m2

OUTSIDE • Laces at calf height for easy fastening and losening


• Basic requirements + steel toecap with impact resistance of 200J and compression of 1500daN

MATERIAL100% vulcanized rubber


• Slip resistance (SRB)


• Basic requirements+steel toecap with impact resistance of 200J and compression of 1500 daN

• Anti-perforation sole (P)

MATERIAL100% vulcanized rubber

The only 100% guaranteed waterproof Woodjack rubber boots provide a class 3 chainsaw protection. The excellent sole of-fers a good grip on muddy terrains and the laces at calf height assure easy donning.

Best price guarantee chainsaw rubber boot in the SIP Protection range.

For occassional use of a chainsaw, these gaiters provide chainsaw protection when securely fixed on top of EN ISO 20345 safety boots.

COLOURSOrange / Black

COLOURS901 Green / Yellow

COLOURSBS0 Blue, GS0 Green

SIZE39 - 42/43 - 46

SIZE38 - 47

SIZE39 - 46

3XB13SD7 3SA5

RUBBER CHAINSAW BOOTS, CLASS 3

RUBBER CHAINSAW BOOTS, CLASS 3

CHAINSAW GAITERS, CLASS 0

EN ISO 17249 EN ISO 17249 EN 381-9EN ISO 20345 EN ISO 20345

HEA

D T

O T

OE

80

Very strong and stretchable mid-high socks with superb mois-ture regulating properties designed to wear in winter. Ideally worn with safety or chainsaw boots.

Very strong and stretchable mid-high socks with superb mois-ture regulating properties designed to wear in summer. Ideally worn with safety or chainsaw boots.

SIZE37-40 (10) - 41-44 (11) - 45-48 (12)

SIZE37-40 (10) - 41-44 (11) - 45-48 (12)

396A395A

THERMO SOCKSCOOL SOCKS

KEY FEATURE • Leg & arch support

• Flex fit & air flow

• Shock absorption

• Moisture management

FABRIC42% cotton, 22% Pro Guards® polyester, 23% polyamide, 12% Amicor® Pure (acrylic), Lycra® 1% elastane

KEY FEATURE • Leg & arch support

• Flex fit & air flow

• Shock absorption

• Moisture management

FABRIC44% wool superwash, 29% polyamide, 17% Pro Guards® Polyester, 9% Amicor® Pure (acrylic), 1% elastane

1

2

1

2

4

7

4

7

5

5

6

63

3

AIR

AIR

MOISTURE

MOISTURE

THERMO/COOLTEMPERATURE REGULATING

MOISTURE MANAGEMENT

FLEX FIT & AIR FLOW (2)Air channels funnel the air around. This results in optimal ventilation!

ARCH SUPPORT (4)Supports the front end of the foot and prevents the sock to slide in an undesired position.

INDICATION OF LEFT AND RIGHT (5)Anatomically dedicated socks to each foot resulting a proper fit and even greater wearing comfort.

HEEL & TOE PROTECTION (6)Significantly prolonged “socklife”. Reinforced fabric provides extra protection to the heel & toe area.

MOISTURE MANAGEMENT (7)The incorporated technology regulates the amount of moisture.

LEG SUPPORT (1)This elastic shaft provides extra support and stimulates the blood flow.

SHOCK ABSORPTION (3)Increased wearing comfort!

HEA

D T

O T

OE

81

82

2SA4 2SA5 2SB4 2SB5 2SA7 2XA1 2SA1 2XA2 2SA3 1SY1 1SX1 1SXAGLOVES GLOVES GLOVES GLOVES GLOVES GLOVES GLOVES GLOVES GLOVES CUFFS CUFFS CUFFSpage 83 page 83 page 84 page 84 page 85 page 85 page 86 page 86 page 86 page 89 page 89 page 89

STANDARDSEN 420 • • • • • • • • • - - -

EN 388 Class 3-1-3-2 3-1-3-2 3-1-3-2 3-1-3-2 3-1-3-2 3-1-4-2 3-1-3-2 3-1-2-2 3-1-3-2 - - -

EN 381-7 Design A A A A A A - - - - - -

Class 0 0 1 1 0 0 - - - - - -

FEATURESleft hand chainsaw protection - - - • • • - - - - - -

both hands chainsaw protection • • • - - - - - - - - -

palm reinforcement - • - - - - - - - - - -

integrated foam in the palm of the hand - - - - - - - • • - - -

para-aramid stitching • • • • • - • - • - - -

arterie protection • • • • - - - - • - - -

elastic cuff - • - • • • - • • • • -

SIZEsize table see page 125 8 - 12 8 - 12 8 - 12 8 - 12 9 - 10 8 - 12 8 - 12 8 - 12 8 - 12 L-XL UNI UNI

HEA

D T

O T

OE

83

EN 381-7 EN 381-7

Hydrophobic gloves assembled with para-aramid stitching that provide chainsaw protection on top of both hands and wrists in accordance with EN 381-7 design A. Leather reinforcement on top of the hands for a higher durability and rubber antiskid reinforcement in the palm of the hands.

Hydrophobic gloves assembled with para-aramid stitching that provide chainsaw protection on top of both hands and wrists in accordance with EN 381-7 design A. Leather reinforcement on top of the hands for a higher durability.

SIZE8 - 12

SIZE8 - 12

2SA52SA4

FORESTRY GLOVES, CLASS 0FORESTRY GLOVES, CLASS 0

OUTSIDE • Hydrophobic • Reinforced on top of the hand with leather • Chainsaw protection on wrists • Chainsaw protection on both hands • Strong aramid stitching

INSIDEProtective inlay from top of the hand up to the lower part of the forearm

FABRIC100% full grain leather

OUTSIDE • Hydrophobic • Reinforced with anti-slip rubber in the palm of both hands and on top of the hand with leather

• Elastic cuff with artery protection

• Chainsaw protection on both hands and reinforced on top of the hand with leather • Strong aramid stitching

INSIDEProtective inlay on top of the hand according to EN 381-7 design A


EN 388 EN 3883-1-3-2 3-1-3-2

HEA

D T

O T

OE

84

EN 381-7 EN 381-7

Gloves assembled with para-aramid stitching that provide chain-saw protection on the top op the left hand and the lower part of the left arm. Leather reinforcement on top of the hands for a higher durability.

Gloves assembled with para-aramid stitching that provide chain-saw protection on both hands and on the lower part of the arms. Leather reinforcement on top of the hand for higher durability.

2SB52SB4

FORESTRY GLOVES, CLASS 1FORESTRY GLOVES, CLASS 1

OUTSIDE • Hydrophobic

• Reinforced on top of the hand with leather

• Chainsaw protection on both hands up until the middle of the lower part of both arms

• Covers a large part of the wrist and arm: 18 cm from the wrist up

• Strong aramid stitching

INSIDEProtective inlay from top of the hand up to the lower part of the forearm




• Chainsaw protection on the left hand up until the middle of the lower part of the left arm

• Covers a large part of the wrist and arm: 18 cm from the wrist up




EN 388 EN 3883-1-3-2 3-1-3-2

COLOURSGSO Green

SIZE8 - 12

COLOURSGSO Green

SIZE8 - 12

HEA

D T

O T

OE

85

EN 381-7 EN 381-7

Best price guarantee left hand protected chainsaw gloves in the SIP PROTECTION range.Hydrophobic gloves assembled with para-aramid stitching that pro-

vide chainsaw protection on top of the left hand in accordance with EN 381-7 class 0. High comfort and flexibility go hand in hand with high quality and durability.

2XA12SA7

WORKING GLOVESFORESTRY GLOVES, CLASS 0


• Knitted cuffs

• Chainsaw protection on the left hand




OUTSIDE • Nylon reinforcement upper

• Yellow lively colored upper for a higher visibility

• Arteries covering elasticated cuff

FABRIC100% bovine leather

EN 388 EN 3883-1-3-2 3-1-4-2

COLOURSGSO Green

SIZE9 - 10

COLOURSY60 Yellow

SIZE8 - 12

HEA

D T

O T

OE

86

These working gloves assembled with para-aramid stitchings are made of a high-quality leather. They are suitable for heavy forestry tasks such as loading and unloading wood. Leather reinforcement on top of the hands for a higher durability.

These working gloves provide great dexterity thanks to their perfect fit and the use of flexibile materials. Impact and vibration foams in the palm of the hand enhance comfort even further.

Anti-vibration working gloves assem-bled with para-aramid stitchings that are made of a high-quality leather. They offer a good dexterity when holding the chainsaw. Leather reinforcement on top of the hands for a higher durability.

2SA1 2XA2 2SA3

WORKING GLOVES WORKING GLOVES WORKING GLOVES





OUTSIDE • Close fitting for a good dexterity

INSIDE • Rubber impact and vibration absorbing pad-ding in the palm of the hand

FABRIC100% leather



• Elastic cuff with artery protection


INSIDE • Vibration absorbing foam in the palm of the hand


EN 388 EN 388 EN 3883-1-3-2 3-1-2-2 3-1-3-2

COLOURSGSO Green

COLOURSRed

COLOURSGSO Green

SIZE8 - 12

SIZE8 - 12

SIZE8 - 12

HEA

D T

O T

OE

87

HEA

D T

O T

OE

87

HEA

D T

O T

OE

CUFFS PROVIDE 360° PROTECTIVEMATERIAL AROUND THE ARMS

HEA

D T

O T

OE

88

HEA

D T

O T

OE

89

These cuffs provide an all-round chainsaw protection 360° around the arm. They can be fitted around the arm with a tensioning elastic and stop cord above the elbow.

These cuffs provide an all-round chain-saw protection 360° around the arm. Elastic wrist and elbow wraps.

The 1SXA cuffs offer chainsaw protection from above the elbow down to the back of the hand. They provide an optimal protection without interfering with any of your movements. The antiskid elastic around the upper arm and the finger-less glove assure a comfortable fit.

1SY1 1SX1 1SXA

CUFFS CUFFS CUFFS

OUTSIDECan be fitted around the arm thanks to a ten-sioning elastic and stop cord behind the elbow

INSIDE360° 8-layer protective inlay around the forearm


OUTSIDETensioning elastic above the elbow

INSIDE360° 6-layer protective inlay around the forearm


OUTSIDETensioning elastic above the elbow

INSIDE360° 6-layer protective inlay from top of the hand to right over the elbow

FABRICWater repellent 2-way stretch Freedom2, 93% polyamide - 7% elastane ± 240g/m2 outer fabric

COLOURSFR1 HV Red

COLOURSC82 Orange, FR1 HV Red


SIZEL-XL

SIZEUNI

SIZEUNI

HEA

D T

O T

OE

90

This very strong climbing helmet is equipped with a chin strap to prevent it from falling from your head when bending over. The ventilation holes keep you comfortable by expelling exces-sive heat.

This FPA certified forestry helmet is apart from being very strong thanks to its UV resistance and ABS, also very comfortable thanks to its lightweightness and the ventilation holes.For full head protection (head / eyes / ears) the references1SY8, 4SB2, 4SB9 and 4SC1 can be fitted on this helmet.

4SB74SB8

FORESTRY & TREECLIMBING HELMETFORESTRY HELMET

OUTSIDE • Classic closing mechanism

• Adjustable in height via stainless inox clip system

• Ventilation holes

INSIDE

Anti-allergy sweat-band

MATERIALABS

OUTSIDE • Classic closing mechanism

• Adjustable in height via stainless inox clip system

• Ventilation holes

INSIDE

Anti-allergy sweat-band

MATERIALABS

EN 397 EN 397

COLOURSCS0 Orange, FR1 High Vis Red

COLOURSCS0 Orange

SIZE—

SIZE—

HEA

D T

O T

OE

DETAIL: EAR DEFENDERS - REF. 4SC7 DETAIL: NECK PROTECTION - REF. 1SY8 DETAIL: BRUSH CUTTER SET - REF. 4SC8

BOTH HELMETS CAN BE EXTENDED WITH DIFFERENT PRODUCTS TO INCREASE THE PROTECTION LEVEL

91

HEA

D T

O T

OE

92

These slim ear defenders provide hearing protection up to 26 db SNR (H: 32db, M: 23db and L: 15db) and are adjustable in height and rust-resistant.They can be mounted on the helmets with ref. 4SB8 and ref. 4SB7.

These ear defenders provide hearing protection up to 30 db SNR (H: 34db, M: 28db and L: 19 db) and are adjustable in height and rust-resistant.They can be mounted on the helmets with ref. 4SB8 and ref. 4SB7.

Basic ear defenders that provide hearing protection up to 23 db SNR.

4SB9 4SC1 4SC7

EAR DEFENDERS EAR DEFENDERS EAR DEFENDERS

KEY FEATURES • Slim and with comfortable fit around the ear

• 26db SNR hearing protection

• Can be mounted on helmets ref. 4SB8 and ref. 4SB7 adjustable in height

KEY FEATURES • Comfortable fit around the ear

• 30 db SNR hearing protection

• Can be mounted on helmets ref. 4SB8 and ref. 4SB7 adjustable in height

KEY FEATURES23db SNR hearing protection

EN 352-3 EN 352-3 EN 352-1

COLOURSYS0 Yellow

COLOURSAS0 Olive Green

COLOURSYS0 Yellow

HEA

D T

O T

OE

93

Waterproof PVC neck guard that can be mounted on the 4SB8 helmet. It offers a solution for the uncomfortable feeling of water running down your neck or bugs falling down your neck while working.

This metal visor provides facial protection against projec-tions. It can be mounted on the 4SB8 and 4SB7 helmets. Suitable for use with ear defenders ref. 4SB9 and ref. 4SC1.

1SY8 4SB2

NECK PROTECTOR METAL VISOR

KEY FEATURESWaterproof PVC

MATERIALDuotex: 100% Polyester fabric with 100 % PVC coating; ± 300 g/m

COLOURSC46 Orange

KEY FEATURESMetal visor (30 cm wide, 15 cm high)

MATERIALDuotex: 100% Polyester fabric with 100 % PVC coating; ± 300 g/m

HEALTHY STEREOCILIA

MODERATELY DAMAGED STEREOCILIA

SEVERELY DAMAGED STEREOCILIA

THE DETERMINATION OF THE RIGHT PROTECTION LEVELIn order to determine the right level of protection consider the 2 explanations about SNR and NRR tables below:NRR or Noise Reduction Rating: it is an attempt to summarize a hearing protectors performance in a simple manner, by processing all the test data in accordance with an established formula. 3 different protection levels are distinguished:

• H: High frequency • M: Medium frequency• L: Low frequency

SNR or Single Number Rating, used for our hearing protectors:It is a European version of the U.S. NRR. The SNR value is expressed in 1 single number.

EN 1731

© Dr. J.O. Pickles 2002 - Images

HEA

D T

O T

OE

94

This basic and lightweight forestry- and brushcutting kit offers a total hearing, facial and head protection all-in-one.

This complete high-quality Peltor™ brush cutter set provides hearing protection up to 27 db SNR (H: 32db, M: 25db and L: 15db). Its extreme lightweightness and the metal visor assure comfort and safety.

This basic complete brush cutter set provides hearing protection up to 25,5 db SNR (H: 30,8db, M: 22,5db and L: 14,8db). Its lightweightness and the metal visor assure comfort and safety.

4SC8 4SA5 4SC6

FORESTRY & BRUSHCUTTER SET BRUSH CUTTER SET BRUSH CUTTER SET

KEY FEATURES • Metal visor (30 cm wide, 16 cm high)

• 25,9 db SNR hearing protection

• 4 anchor points

OUTSIDE • Visor 30 cm wide, 16 cm high

• Closure by rack and pinion mechanism

MATERIAL

Helmet 100% molded polypropylene


• Comfortable brush cutting protection

• 27db SNR hearing protection

• Lightweight



MATERIALMetal visor


• Comfortable brush cutting protection

• 25,5 db SNR hearing protection

• Lightweight



MATERIALMetal visor

EN 352-3 EN 397 EN 1731 EN 1731 EN 1731EN 352-1 EN 352-1

COLOURS700 Yellow/Red

COLOURS0 Yellow/Red

COLOURSYS0 Yellow

HEA

D T

O T

OE

95

These UV absorbent (99,5% at 370 mn) and light transmis-sive glasses (95%) made out of polycarbonate protect your eyes against the sun and provide some protection against the minor impact of branches.

These basic glasses with adjustable sides protect against pro-jections of sawdust and the minor impact of falling twigs.

4SB6 4SA6

SAFETY SUN GLASSES SAFETY GLASSES

KEY FEATURES • UV absorbent

• Lightweight

MATERIALPolycarbonate glasses - grilamid and elastomere temples

KEY FEATURESAdjustable sides in length

MATERIALPolycarbonate glasses

EN 166 - EN 170 EN 166

COLOURSHS0 Royal Blue, YS0 Yellow

SPECIAL APPLICATIONSThese products offer chainsaw and non-chainsaw protective solutions for firefighters and intervention teams. Here you will also find brush-cutting protective solutions.

As each job requires a different approach, specific apparel meets specific demands. Consider the specific characteristics found in the apparel of rescue workers, facilitating a smooth intervention.

SIP Protection offers 3 products designed specifically for intervention teams. These are the things they all have in common:

1) They need to be easy to put on and take off to assure swift intervention because they can be zipped-in or zipped-off quickly.

2) Interventions are often executed either during foul weather conditions or during night time. Consequently they need to be very conspicuous thanks to lively colours or retro-reflective stripings.

3) Salvage operations are rarely executed in non-hostile environments. A collapsed building, mountainous terrains or caves are a reality when it comes to rescue operations. A strong, water repellent, stretchable and comfortable fabric is necessary to assure that the wearer focuses on the job instead of having to struggle with the working environment.

97

SP

ECIF

IC A

PP

LIC

ATIO

NS

98

WATERPROOFCOLD PROTECTION

BREATHABLE

WINDPROOF

Class 2 HI-VIS chainsaw leggings in accordance with EN 471, class 2-2. Waterproof and breathable Siopor® outer fabric. Fits over the fireman’s flame resistant intervention trousers.

Traditional firemen style one size fits all chainsaw leggings. Closing by means of separate reference leather belt. The airy design offers an increased ventilation. Very user-friendly thanks to the smoothly running zipper.

1SX8Widener for leggings 1ST4, it adds an extra 9 cm to the leggings

COLOURS058 Navy/Red

COLOURS815 HV Red/Navy

1SU81ST4

HI-VIS CHAINSAW LEGGINGS, CLASS 2 TYPE ACHAINSAW LEGGINGS, CLASS 1 TYPE A

SIZEUNI

SIZEUNI



• Possibility to widen with extension 1SX8



MATERIALWater repellent 65% Polyester - 35% cotton outer fabric ± 245g/m2


• 2 elasticated adjustable braces and closing by buckles

• Front bib



MATERIALSIOPOR Regular: 100 % Polyester fabric with 100% PU coating; ± 155 g/m

EN 471EN 381-5EN 381-5

OUTSIDE • Large zip closure with flap and touch and close fastening on the front from neck to crotch

• 1 patched pocket with gusset and with flap on the left hand side of the chest for radio equipment

• 1 patched pocket with gusset and zip closure on each leg

• 1 patched pocket with gusset and zip closure on each arm

• 1 patched pocket with gusset on the right hand side of the chest and iden-tification mica and vertical zip closure

• Loops for radio on the chest and on the collar

• 1 zip closure on the outside of each leg till the armpit for easy dress-and undressing





This coverall was developed especially for rescue workers. It is made of a fully stretchable Texxion outer fabric with Teflon® Shield Pro+ finish for an excellent freedom of move-ment. The knees, back, elbows and shoulders are equipped with preformed waterproof Tektor reinforcements. The design offers several practical pockets in the right places.


SIZES - 2XL

1SCG

RESCUE COVERALL


EN 381-11

SP

ECIF

IC A

PP

LIC

ATIO

NS

99

100

1SQ8 1ST8 1SQ4 1SQ5 5SA3 5SA2 1SRE 1SX4 5SALTROUSERS TROUSERS TROUSERS TROUSERS APRON APRON TROUSERS GAITERS TIBIApage 101 page 101 page 102 page 102 page 104 page 104 page 104 page 105 page 105

STANDARDSEN 471 Class - - - 2-2 - - - - -

EN 340 (4) 1998 - 1998 2003 - - 2003 - -

FEATURESwaterproof front • • - - - - - • -

waterproof and breathable front - - • • - - • - -

incorporated impact absorbing foam • • • • - - - • •

DURABILITYabrasion resistantthorn resistant

COLOURScolour ref. 517 517 509 570|387 WJ0 WJ0 G75 G60 Y50

SIZEsize table (page 125) XS-4XL UNI XS-4XL XS-3XL UNI UNI S-3XL UNI UNI

(1) for appropriate size tabel, see page 125

SP

ECIF

IC A

PP

LIC

ATIO

NS

101

User-friendly one size fits all brushcutting leggings with protection against flying debris. Easy to clean thanks to the waterproof polyamide front.

Lightweight brushcutting trousers with protection against flying debris thanks to the fixed impact resistant padding. Easy to clean thanks to the waterproof polyamide front.



1ST81SQ8

BRUSH CUTTING LEGGINGBRUSH CUTTING TROUSERS

SIZEXS-3XL

SIZEUNI

OUTSIDE • Front fly with zip closure - closing by 1 button, Loops for belt • 2 inset pockets • 1 patched pocket with flap and closure by press studs on the back • Elasticated waist with loops for belt - buttons for braces • Back bib with buttons for braces • Triple-needle stitching on the back seam to the inside leg

INSIDE • Impact absorbing foam 3 mm





INSIDEImpact absorbing foam 3 mm



EN 381-11 EN 381-11

SP

ECIF

IC A

PP

LIC

ATIO

NS

102

Hi-vis EN 471, class 2-2 brushcutting trousers with removable impact resistant foam. The waterproof and breathable (n.a. suffix) front avoids water penetration for increased comfort.

Brushcutting trousers with removable impact resistant foam. The waterproof and breathable (n.a. suffix) front avoids water penetration for increased comfort.

COLOURS509 Khaki/HV Orange

COLOURS570 HV Orange/Black, 387 HV Yelow/Black

1SQ51SQ4

HI-VIS BRUSH CUTTING TROUSERSBRUSH CUTTING TROUSERS

SIZES-4XL

SIZEXS-3XL


• 2 inset pockets

• 1 patched pocket with flap and closure by press studs on the back




INSIDERemovable high-density impact absorbing foam 6mm



• 2 inset pockets

INSIDERemovable high-density impact absorbing foam 6mm


EN 381-11 EN 381-11 EN 471

SP

ECIF

IC A

PP

LIC

ATIO

NS

102

103

SP

ECIF

IC A

PP

LIC

ATIO

NS

103

SP

ECIF

IC A

PP

LIC

ATIO

NS

104

Dirt repellent, east to clean trousers suitable for warm brush-cutting conditions thanks to their very low weight and the waterproof yet breathable reinforcement.

This leather brush cutting apron covering the whole front part of your body is perfectly suitable for warm and dry weather conditions.

COLOURSWJ0 Beige

COLOURSG75 Green

1SRE5SA35SA2

BRUSHCUTTING TROUSERS - SAVANNEBRUSH CUTTING APRON

SIZEUNI

SIZES - 3XL

OUTSIDEClosure by leather straps and metal single prong

MATERIAL100% cowhide leather


• 2 inset pockets

• 1 patched pocket on the back



Siopor Ultra: 100 % Polyester fabric with 100% PU coating; ± 195 g/m2

EN 381-11 EN 381-11

SP

ECIF

IC A

PP

LIC

ATIO

NS

105

Tibia protectors offer a good protection against severe impacts on the tibia and provide additional protection when worn over brushcutting trousers.

Gaiters provide adequate protection against flying debris and protect the bottom of the trousers from vegetation close to the ground.

COLOURS960 Green

COLOURSYSO Yellow

5SAL1SX4

TIBIA PROTECTORSBRUSH CUTTING GAITERS

SIZEUNI

SIZEUNI

OUTSIDEZip closure on the inside of the gaiters

INSIDEImpact absorbing foam

FABRIC100% Polyamide fabric with PU coating (±135g/m2)

OUTSIDEClosure by rubber straps

INSIDEImpact absorbing foam

MATERIALABS and 100% cowhide leather

EN 381-11 EN 381-11

FOUL WEATHERProtection against all weather conditions.

Multi-layering concept

The concept of multi-layering signifies that multiple, interactive layers of clothing are used, each layer having its own complementary function.

The advantages of a multi-layering concept are quite easy to understand. Combine the benefits of different kinds of clothing and you end up being well protected and well prepared for any kind of weather.

The main reason of its existence: It is not because it is raining now that it cannot be warm and sunny minutes later or the other way around…

107

FOU

L W

EATH

ER

108

Hi-vis T-shirt with SIO-COOL® LIGHT fabric.Technical T-shirt that offers an unsurpassed comfort. It evacu-ates transpiration quickly keeping you fresh and dry.

COLOURS844 HV Yellow/Red, 914 HVOrange/Grey


385A397A

HI-VIS T-SHIRTHI-VIS T-SHIRT

SIZES-3XL

SIZES-3XL

KEY FEATURES • 100% SIOCOOL light • High comfort thanks to the SIO-COOL® light fabric with incorporated nano-silver technology

• Perspiration anti-wicking function • Lively colors, easily distinguishable from green foliage • Quick drying • Odor absorbing

OUTSIDE • Short and straight collar • Zip closure from the chest up to the neck with anti-irritation flap • No horizontal stitches around the chest

FABRIC • 100% ‘SIO-COOL® Light’ polyester bird-eye; ± 130 g/m2

KEY FEATURES • Hi-vis mesh at both sides under the arms for maximal ventilation • Stitched and stretchable reflective tape • Permanent anti-microbial eliminating all odours

FABRIC • 100% ‘SIO-COOL® Light’ polyester bird-eye; ± 130 g/m2

EN 471

108

FOU

L W

EATH

ER

109

THE BASE LAYER ABSORBS PERSPIRATION AND DISPERSES IT AWAY FROM THE SKINSIO-COOL® FABRICSIO-COOL® is a concept of multi-functional yarns, which is combined with quick-drying and anti-microbial, deodorant functions. SIO-COOL® combines the softness of cotton and the cool, easy care properties of polyester to keep you fresh and cool at any time.

The excellent transport, drying and comfort characteristics of SIO-COOL® assures that perspiration does not accumulate, but quickly reaches the surface where it is released to the surrounding air, thus the skin stays dry longer.

NANO SILV

ER TE

CHNO

LOGY

SIO-COOL® Light fabric (±130 gr/m2)

Skin

Cross-section of yarn

FOU

L W

EATH

ER

109

FOU

L W

EATH

ER

110

A bodywarmer keeps the area warm where we lose most of our body heat. A second but more important advantage, especially for chainsaw users, is the fact that a bodywarmer guarantees free movement of the arms.

The double sided fleece jacket provides an excellent cold pro-tection whilst staying breathable at the same time.

COLOURSA96 Kaki; B90 Navy

COLOURSB81 Nassau Blue; M44 Grey; N20 Black

087A7472

BODYWARMERFLEECE JACKET

SIZES-3XL

SIZES-3XL

OUTSIDE

• Straight collar

• Zip closure


• Elasticated cuffs / Drawstring in hem

INSIDEUnlined

FABRIC 100% polyester double sided fleece: ± 285 g/m²

OUTSIDE

• Straight collar

• Zip closure under flap with press studs

• 2 patched chest pockets with gusset, 2 patched pockets, 1 phone pocket, 1 pen pocket , 1 loop for badge

• Drawstring in hem

INSIDE • Fixed quilted lining

• 1 inside pocket

FABRIC 100% polyester ripstop with PVC coating

EN 342 EN 342EN 14058 EN 14058

FOU

L W

EATH

ER

110

FOU

L W

EATH

ER

This extremely comfortable rain jacket provides 100% water-proofness with a very high breathability (3 on a maximum scale of 3).

This double-sided fleece jacket offers comfortable warmth. Warmth, yet very little transpiration, thanks to the breathable properties of this fleece.

COLOURS201 Navy/Black; 203 Red/Black; 312 Grey/Black; 617 Green/Black

COLOURS201 Navy/Black; 203 Red/Black; 312 Grey/Black; 453 Green/Black

608Z611Z

RAIN JACKETFLEECE JACKET

SIZES-3XL

SIZES-3XL

OUTSIDE

• Straight collar

• Zip closure with chin protection

• 1 inset chest pocket with zip closure, 2 inset pockets with zip closure

• Round inset sleeves

• Elasticated cuffs, Elastic drawstring in hem

INSIDE • Fixed windbreaker lining in front and back

• 1 inside pocket

FABRIC 100% polyester double sided fleece: ± 285 g/m²

OUTSIDE

Straight collar / Detachable hood with chin protection + peak / Zip closure under double flap with press studs / 2 inset chest pockets with zip closure / 2 inset pockets with zip closure / 1 sleeve pocket / 1 napoleon pocket / Shaped sleeves / Elastic at end of sleeves with narrowing by touch & close fastening / Underarm ventilation / Drawstring in waist and hem / Back length 85 cm (L)

INSIDEFixed lining: mesh in body and polyamide in sleeve / 1 Inside pocket / Inside pocket for storage of hood / Different linings/ fleeces can be zipped in

FABRIC SIOPOR® Extra: 100% polyester fabric (cotton touch) laminated with 100% PU film; ± 205 g/m²

EN 343EN 342EN 14058

FOU

L W

EATH

ER

111

FOU

L W

EATH

ER

112

Modern lightweigth softshell jacket with detachable sleeves. The jacket has a high cold and wind protection.

624Z

SOFTSHELL

INSIDE 1 inside pocket

FABRIC2-layer bonded softshell: 100% polyester stretch + 100% polyester fleece inside; ± 250 g/m2

OUTSIDE • Straight collar

• Zip closure with chin protection

• 1 inset chest pocket with zip closure


• Detachable sleeves

• Sleeve narrowing by touch and close fastening

• Back length 75 cm (L)

COLOURS201 Navy/Black - 203 Red/Black - 312 Grey/Black - 617 Green/Black

SIZEXS-3XL

EN 342EN 14058

FOU

L W

EATH

ER

113

PROFI

EN 343 EN 343

COLOURSA41 Khaki/HV Orange

COLOURSA41 Green Khaki

COLOURSA41 Green Khaki

SIZES-2XL

SIZES-2XL

SIZES-3XL

This product hardly needs an introduc-tion. The highly durable SIP Protection rain jacket, EN 343, class 3-2 will con-tinue to prove its worth, as it has been doing for the past decade.

Same properties as 1SJ3 rain jacket. This Flexothane® CLASSIC coverall pro-vides rain protection from head to toe. Ideal for working during very rainy and windy weather

1SJ3 1SP4 4910

RAIN JACKET RAIN TROUSERS RAIN COVERALL

KEY FEATURES • Excellent wind and rain protection

• Extremely durable

• Stretchable

• Noiseless

• Foldaway hood in collar


• Extremely durable

• Stretchable

• Noiseless

• Zip at the bottom of the trousers for easy fitting over boots


• Easy opening and closing thanks to long zip closures under the flap

EN 343

PROFI

FOU

L W

EATH

ER

114

These clip braces are adjustable in height and can be fixed on any pair of trousers.

Very durable belt able to resist higher tension. 2 sizes: 110, 115

These braces with loop are adjustable in height and can be fixed on any trousers of our product range with braces buttons.

To keep your boots in top shape you need to main-tain them properly using the appropriate tools. This high-quality odourless and colourless boot grease assures that the leather of your boots stays supple and waterproof.

BRACES WITH LOOPSBRACES WITH CLIPS5SA6

5SB2

5SA5

5SA7

FOU

L W

EATH

ER

115

5SA9

CELOXTM SAVES LIVES.IT CAN STOP EVEN POTENTIALLY LETHAL BLEEDING FAST

CELOX™ can stop even potentially lethal bleeding fast. It is easy to use (just pour, pack and apply pressure), very safe (tested to class 3 CE Mark standards) and extremely effective. CELOX™ saves lives.

Is suitable for? All moderate to severe bleeding wounds (Arterial and venous bleeding, Surface and deep wounds, Head and neck face wounds)

It works independently of the bodies normal clotting processes. CELOX’s™ clotting ability has been proven to work in the cold (hypothermia) or in the presense of common anti-coagulants such as warfarin. It generates no heat and will not burn the casuality or care giver. In clinical tests by the US marines, CELOX™ was the only product to give 100% survival. It gave a strong stable MAP (mean arterial blood pressure) and was also the only product to give robustclotting with no rebleeding.

WHEN MIXED WITH BLOOD, CELOX™ FORMS A ROBUST GEL LIKE CLOT IN 30 SECONDS.

CELOX HAS PROVED IT CAN SAVE LIVES

R&D, QUALITY AND INNOVATION

“Protection through Innovation” is the key philosophy of the SIOEN Group, the company behind SIP Protection. This idea is also the driving force behind SIP Protection’s continuing investments in Research and Development.

ALREADY IN 1990, SIP PROTECTION HAD ITS OWN TESTING RIG FOR THE DE-VELOPMENT OF CHAINSAW TROUSERS. IT HELPED US TO CREATE THE FIRST TROUSERS WITH 6 PROTECTIVE LAYERS ON THE MARKET.

Nowadays, we keep on using an updated testing rig for new developments in our quest for newer, safer, lighter and more comfortable blocking materials. We also perform regular and random safety checks on running productions, in order to assure the high level of security that our customers have come to expect from us.

Research is also of great importance in the search for new fabrics, materials, trims. Depending on the required applications, we perform various tests on the different fabrics in order to find the ones that meet our expectations.

Anno 1990 - in-house test rig Anno 2003 - in-house test rig Anno 2014 - in-house test rig116116

PICTURE 1: BEFORE IMPACTThis image depicts a running chainsaw nearing a test leg.

In real life, when not wearing a pair of chainsaw trousers, a potentially lethal accident is only moments away.

The user is unaware that he or she is in danger.

PICTURE 2: IMPACTThis image depicts the chainsaw actually making contact with the test leg fitted with a protective pair of trousers.

The protective fibers are clearly pulled into the driving sprocket. The chain is vis-ible on the picture, proves the effective-ness of the mechanism from the moment it makes contact.

In real life, at this point in time, the one wearing a pair of protective trousers does not realize what is happening.

PICTURE 3: AFTER IMPACTThe movement of the chain on the blade has been blocked completely after a split second.

In real life, the person wearing a pair of protective trousers only just starts to realize what is happening. After a few seconds the user fully realizes what has happened: without the blocking mech-anism, a severe injury would have been unavoidable.

Prior to the launch of any new chainsaw protective product thorough testing is of the utmost importance. The first tests are executed at our own testing rig and are tested again at a later stage by an independent body in order to obtain EN certification.For chainsaw protection, have a closer look at the pictures below shot in our in-house test rig.

Chainsaw protection is the main focus of our R&D activities. Of course we do not stop there. A whole serie of tests is executed on a daily basis in order to test the quality of the fabrics we use in our products.

SPRAY TESTDetermination of the water repellency

TEAR STRENGTH TEST Determination of mechanical performance

MARTINDALE TESTDetermination of the abrasion resistance 117117

The protective system used in SIP Protection clothing is a combination of a number of immobilization and speed reduction principles of the chainsaw.

Because of the unique features of the SIP Protection anti-cut material, we can manufacture products, which comply with the European Standard EN 381, and which are light, comfortable and easy to maintain.

MAINTENANCE IS OF UTMOST IMPORTANCE TO MAKE SURE THAT THE INDEPENDENT LAYERS WITHIN THE PROTECTIVE INLAY DO NOT STICK TOGETHER, OR ARE DAMAGED IN ANY WAY, THUS DECREASING THE LEVEL OF PROTECTION.

Compare it, if you will, to a car. Without occasionally servicing your brakes, you will not be driving safely. Each garment you will get comes with a separate manual about how to properly wash and dry.

Whenever you have a question on the maintenance of your garment, please carefully read the user instructions that are added to every single packaging.

TAKING CARE OF YOUR PROTECTIVE CLOTHING

Below you’ll find a summary of the meaning of the wash & care symbols. Find the correct washing instructions on the label in your garment.

WassymbolenWassen in de wasmachine is geoorloofd,mits de temperatuur niet boven 30o komt.

Wassen in de wasmachine is geoorloofd,volgens een wolwasprogramma.

Wassen in de wasmachine is geoorloofd,mits de temperatuur niet boven 40o komt.

Wassen in de wasmachine is geoorloofd,mits de temperatuur niet boven 40o komt.*



Wassen in de wasmachine is bij elke temperatuur geoorloofd.

Wassen in de wasmachine is bij elke temperatuur geoorloofd.*

Lauw wassen en uitsluitend met de hand,temperatuur mag niet boven 40o zijn.

Niet wassen of spoelen met water.

Drogen op lage temperatuur.

Geen beperking voor de temperatuur van het drogen.

Niet in de droogtrommel drogen.

Warm, maar niet heet strijken, eventueel voorzichtig persen onder vochtige doek.

Matig heet strijken, persen onder een vochtige doek.

Heet strijken, persen onder een vochtige doek.

Niet strijken, persen is onmogelijk.

Het artikel is bestand tegen alle gebruikelijkevlekken- en oplosmiddelen.

Alle solventen uitgezonderd tricholertheen

Enkel petroleum solventen en R113

Niet chemisch reinigen, voorzichtig met vlekken- en oplosmiddelen.

Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F

all solvents normally used

all solvents except trichlorethylene

only petroleum solvents and R113

limited movements

do not dry clean

high max. 200°C

max. 150°C

low max. 110°Csteam-ironing may be risky

do not iron / no steam treatments






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F






















Niet bleken.

A

P

F



P

F

normal washing at advised temperature

max. at the advised temperature / reduced mechanical action / rinsing at decreasing temperature (cooling down) / reduced spinning

hand wash only / no machine wash / max. 40°C / handle with care

do not wash

do not use chlorine-based bleach

tumble drying / normal cycle

tumble drying / lower cycle

do not tumble dry

CARE INSTRUCTIONS

118118

WHAT ARE THE MAIN CAUSES OF A POSSIBLE DECREASE IN THE LEVEL OF PROTECTION?

When to go for new chainsaw protective clothing?This depends entirely on the frequency of use. When maintained properly the quality of our products assures adequate protection for a maximum amount of time.The lifetime of your trousers will depend on the intensity of use (are you a daily or occasional user), on the roughness of the environment (thorns,... ) and on the style of trousers you have selected.

DIRT & GREASESubstances such as resin, chainsaw oil, gasoline, ...

might potentially soil the protective inlay and might cause the independent protective layers to stick together.

SHRINKAGE / TUMBLE DRYINGShrinkage decreases the level of protection because it might signifi-cantly reform the original shape of the protective layer.

Tumble drying of chainsaw protective clothing might disturb the shape of the protective inlay lowering efficiency.

HEATDirect contact with a heat source e.g. a hot motor. This can induce a crusting or burning through process damaging the protective inlay and shortening the independent fibres.

Be careful, even if your outer fabric is not visibly damaged by a heat source, the fibres that lie beneath may have suffered from the heat resulting in a reduced level of protection.

WRONG STITCHINGNever stitch through the protective inlay (only the outer fabric may be repaired) as this will decrease the immobilization process in case of an accident.

Of course, cutting off a piece of the trousers decreases the level of protection 119119

All SIP Protection products meet the EC stipulations and are certified and marked as doing so. The CE mark indicates the compliance with the fundamental health and safety requirements from the European Directive 89/686.The pictograms which you can find on the inside of your protective clothing, reflect the different levels of protective requirements which have been set in the framework of the European standards. The higher the value for a parameter, the higher the level of protection.

Constant quality control and our personal care for your safety, guarantees that all SIP Protection products are high performance. Unless indicated otherwise, all test have - within the frame of the norm - been carried out after 5 washes at 60°C and line dried 5 times.

EN 381PROTECTION AGAINST HAND-HELD CHAINSAWS

The European standard EN 381 complies with protective clothing for chainsaw users.This norm is divided into different parts (or designs).

Each part treats a specific part of the body:• EN381-5: Requirements for leg protectors• EN381-7: Requirements for chainsaw protective gloves• EN381-9: Requirements for chainsaw protective gaiters• EN381-11: Requirements for upper part of the body

The norm also prescribes 4 classes that correspond to the chain speed with which the tests have been done:

• Class0: 16 m/s • Class1: 20 m/s • Class2: 24 m/s • Class3: 28 m/s

Not all classes are authorized in each part of the norm. (see further for details)

EN 381

EN 381-5:1995

Class 1 - Type A

EN 381-7:

EN 381-9:2002

Class 0

EN 381-11:2002

Class 0

CLASSIFICATION OF PROTECTIVE CLOTHING BY CATEGORY

CategoryI Declaration of conformity Working clothing to protect against superficial cuts caused by machines, rain wear.

CategoryII EC- type test(*)

+ declaration of conformityProtective clothing and gloves to protect against cuts, safety glasses, helmets and face shields, fluorescent clothing, safety boots.

CategoryIII EC- type test(*)

+ declaration of conformity+ ISO control of production by notified body or sampling and testing by notified body

Protective wear, glasses, helmets against heat over (100°C) and against cold (-50°C), against electric shocks. Protect against falling from great heights.

EC- TYPE TEST: CE MARKThe CE mark indicates the compliance with the fundamental health and safety requirements from the European Directive 89/686. All SIP Protection products meet the EC stipulations and are certified and marked as doing so.

EUROPEAN STANDARDS

120120

EN 381-5: LEG PROTECTORSPROTECTION AGAINST HAND-HELD CHAINSAWS

This part specifies the demands for leg protection wear and defines three types (or designs) of leg protection wear, according to the kind of protection:

EN 381-11: PROTECTIVE UPPER PART OF THE BODYPROTECTION AGAINST HAND-HELD CHAINSAWS

EN 381-5:1995

Class 1 - Type A

EN 381-11:2002

Class 0

TYPE A TYPE B TYPE C

The chainsaw protective clothing of type A and type B are mainly intended to be used for forestry work by professional lumber jacks who have been trained and informed.(*)

The chainsaw protective clothing of type C are intended to be used by people who normally don’t work with chainsaws or in exceptional situations.

Type A (or front protection) covers each leg partly (180°) and 5 cm to the interior part of the right leg and 5 cm the exterior part of the left leg.

Protection starts at max. 5 cm from the bottom of the leg and ends at min. 20 cm above the crotch.

Type B is identical to type A but has an extra 5 cm of protection to the interior part of the left leg.

Type C covers each leg all around (360°) protection. The protection starts at max. 5 cm from the bottom of the leg and ends at min. 20 cm above the front of side of the crotch and at min. 50 cm under the back side of the crotch.

(*) For types A and B the protection must be fixed permanently on the sides of the protective padding. The fixing of the protection must resist a force of min. 200N. Class 0 (16 m/s) is not applicable to the EN 381-5 standard.

30 max

FRONTTYPE A PROTECTION

200

50

BACKTYPE A PROTECTION

200

200

50

50

30 max

FRONTTYPE B PROTECTION

200

50

BACKTYPE B PROTECTION

200

200

50

50

30 max

FRONTTYPE C PROTECTION

200

50

BACKTYPE C PROTECTION

50

50

STANDARD STANDARD + BELLY PROTECTION

The 2 images above depict the design of a chainsaw protective jacket according to standard EN 381-11.

In contrast to chainsaw trousers where 3 designs are possible there is just 1 design for the conception of chainsaw jackets in order to be conform to the standard.

On both front and backside of the jacket the standard defines a minimum surface of protective inlay on the shoulders, arms and chest. On the front side of the sleeves the protective inlay must cover a minimum of 80% of the total surface and the non-protect-ed surface from the end of the sleeves mustn’t exceed 70 mm.

The 2 images above despict the design of a chainsaw protective jacket according to standard EN 381-11 + additional full front protection.

Chainsaw jackets are more and more used for working on servicing platforms, occasional use of the chainsaw or in exceptional and dan-gerous working circumstances. As a consequence, 3 jackets (1SI7, 1SIA and 1SIS) in this catalogue have additional belly protection on top of the standard in order to provide even more safety. Basically, conception is the same as a normal standard jacket but there is added protection of the abdomen (see picture).

front back

front frontback back

front back front back

121121

EN 510PROTECTION AGAINST MOVING PARTS

Specification for protective clothing for use where there is a risk of entanglement with moving parts.

EN 510:1993

EN 381-7: PROTECTIVE GLOVESPROTECTION AGAINST HAND-HELD CHAINSAWS

This part specifies the demands for chainsaw protective gloves. It describes 2 designs: design A & design B.

EN 381-9: PROTECTIVE GAITERSPROTECTION AGAINST HAND-HELD CHAINSAWS

To be worn on top of safety boots certified EN ISO 20345.

EN ISO 17249: CHAINSAW PROTECTIVE BOOTSPROTECTION AGAINST HAND-HELD CHAINSAWS

A chainsaw boot is always a safety boot in the first place.

A boot complying to EN ISO 17249 automatically complies to EN ISO 20345. Therefore a chainsaw boot does not have to be labelled EN ISO 20345.

EN 381-7:

EN 381-9:2002

Class 0

Class 1

EN ISO 172492004

DESIGN A DESIGN B

Standard EN 381-7 design A for gloves describes a protection surface on the back of the hand. The protective surface must be minimum 110 mm wide and min-imum 120 mm high at the highest point (without the fingers).

Standard EN 381-7 design B for gloves describes a protection on the back of the hand and 4 fingers. The protective surface must be minimum 110 mm wide and minimum 190 mm high from the base to the highest point

DESIGN A

2

1

34

5

A

B

8 m

ax12

0 m

in

110 min

8 max

225

2

80

14

200

min

25 m

ax

DESIGN B

2

1

345

190

min

110 min

To be worn on top of safety boots certified EN ISO 20345. Because safety boots have a steel nose there may be a gap in the chainsaw protective covering surface but it mustn’t exceed more than 14 mm from the front end of the boot. The minimum height must be 200 mm and distance gaiter-ground maximum 25 mm.

122122

EN ISO 20471 AND EN 471PROFESSIONAL HIGH VISIBILITY CLOTHING

x: Surface of fluorescent and retro-reflective material (3 levels)

CLASS 1 CLASS 2 CLASS 3Fluorescent background material 0,14 0,50 0,80Retro-reflective material 0,10 0,13 0,20Or combined performance material 0,20 - -

y: Quality of the retro-reflective material (2 levels) (only for EN471) There are 2 performance classes for retro-reflective material. (Furthermore, there are also combined performance materials (simultaneously fluorescent and retro-reflective).

EN 343PROTECTION AGAINST FOUL WEATHER CONDITIONS

This European standard concerns protective clothing against rain, wind and cold at temperatures higher than -5°C. The standard provides for 2 performance parameters:

x: waterproofness - resistance of water penetration (3 levels)

y: breathing properties (3 levels)

EN 388PROTECTION AGAINST MEHANICAL HAZARDS

This standard applies to all types of gloves that provide protection against physical and mechanical hazards due to abrasion, cuts, puncture and tearing.

EN 342 PROTECTION AGAINST COLD

This standard determines the requirements for P.P.E. (Personal Protective Equipment) to be worn at temperatures under -5°C.

The following parameters are used:x: resulting thermal insulation measured with underwear of type B (see label)y: air permeability (3 levels)z: water vapour permeability (3 levels)

EN 14058: Protection against cool enviroments combination of wind/humidity/-5° ≥

EN 342:1998

EN 14058:2004

EN 343:1998

EN 471:1994

1

1

EN 388:2003

3 1 3 2

EN ISO 20471:2013

1

CLASS 1 CLASS 2 CLASS 3Water vapour resistance Ret > 150 20 < Ret ≤ 150 Ret ≤ 20EN 343:2003 Ret > 40 20 < Ret ≤ 40 Ret ≤ 20(*) Ret: resistance value (unit m2.Pa/W), which is measured by the skin - modeltest ISO 11092.

CLASS 1 CLASS 2 CLASS 3Before pretreatment ≥ 800 mm - -Before pretreatment & seams ≥ 800 mm ≥ 800 mm ≥ 1300 mmAfter each pretreatment - ≥ 800 mm ≥ 1300 mm(*) pretreatments: washing and/or dry cleaning, abrasion, the influence of fuel and oil, flexing.

123123

INN

OVA

TIO

N

124

TREES ARE GOOD

Find a chapter close to you at www.isa-arbor.com/chaptersLearn more and find an arborist at www.TreesAreGood.org

Who Are We? With over 20,000 members throughout the world, the International Society of Arboriculture (ISA) is the largest professional association of those dedicated to the practice and study of tree care. ISA offers memberships directly through ISA Headquarters and/or through our chapter affiliations in more than 50 global regions. Our goal is to promote the arboriculture profession through research and education and connect with tree care consumers internationally to inform them about the benefits of trees and proper tree care. ISA…making the world a better place, one tree at a time.

Through research, technology, and education, the International Society of Arboriculture (ISA) promotes the professional practice of arboriculture and fosters a greater worldwide awareness of the benefits of trees.

Our Mission

INN

OVA

TIO

N

125

TREES ARE GOOD

Trees are good Trees need care

Arborists care for trees

International Society of Arboriculturewww.isa-arbor.com • p. +1 217.355.9411 • [email protected]

ISA’s TreesAreGood™ website (www.treesaregood.org) is a versatile resource for both tree owners and arborists. Discover 19 downloadable brochures that offer valuable information about the benefits of trees, tree selection and planting, the care of trees, risk assessment, and the need for proper tree care by a skilled arborist.

Find green educational activities for the classroom, home, or urban tree planting and recovery projects. Links to the latest tree care-related press releases and a database of free urban forest images offer further enrichment.Confirm arborists’ ISA credentials with the “Verify an ISA Credential” search tool. Use “Find an Arborist”

to locate certified professionals in your area. This search function is an excellent marketing oppor-tunity for ISA credential holders to advertise their businesses at no cost. Those who are also ISA members can further enhance their listings.Explore www.treesaregood.org today and learn how much this ISA website can offer you.

Your Resource

SIP Protection is proud to partner with International Society of Arboriculture in supporting TreesAreGood.org to promote proper tree care, and the professional practice of arboriculture

SIZE TABLE

insi

de le

ngth

heig

ht w

aist

- fe

et

neck

chest

waist

leng

th

TROUSERS, BIB&BRACE, COVERALLXS (1) S (2) M (3) L (4) XL (5) XXL (6) XXXL (7) XXXXL (8)

EN340 1998 1/2 waist circumference in cm (commercial size)

34-36 38-40 42-44 46-48 50-52 54-56 58-60 62-64

waist circumference in cm 68-72 76-80 84-88 92-96 100-104 108-112 116-120 124-128

EN 340 2003 1/2 waist circumference in cm (commercial size)

33-37 37-41 41-45 45-49 49-53 53-58,5 58,5-64,5 64,5-70,5

waist circumference in cm66-74 74-82 82-90 90-98 98-106 106-117 117-129 129-141

(!) leg length may vary per model, leg lengths of each model can be in the overview tables at the beginning of each range

JACKETS AND T-SHIRTSXS S M L XL XXL XXXL XXXXL

EN340 1998 1/2 chest circumference in cm (commercial size)

42-44 46-48 50-52 54-56 58-60 62-64 66-68 70-72

chest circumference in cm84-88 92-96 100-104 108-112 116-120 124-128 132-136 140-144

EN 340 2003 1/2 chest circumference in cm (commercial size)

39-43 43-47 47-51 51-55 55-59 59-64,5 64,5-70,5 70,5-76,5

chest circumference in cm78-86 86-94 94-102 102-110 110-118 118-129 129-141 141-153

RUBBER BOOTS AND LEATHER BOOTSEU UK

36 3,5

37 4,5

38 5

39 5,5 - 6

40 6,5

41 7 - 7,5

42 8

43 8,5 - 9

44 9,5

45 10 - 10,5

46 11

47 11,5 - 12

48 12,5

49 13 - 13,5

50 14

GLOVES8 palm width 8cm (measured under the fingers)

9 palm width 9cm (measured under the fingers)



12 palm width 12cm (measured under the fingers)126126

palm width palm width

INDEX

1SC1 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 591SCG . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . . .pg 991SCQ . . . . . . . . . . . FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 431SG2 . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 561SG3 . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 561SG6 . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 561SG7 . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 661SG9 . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 711SHN . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 631SI1 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 601SI5 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 681SI9 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 701SI7 . . . . . . . . . . . . FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 421SIA . . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 281SIS . . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 271SIV . . . . . . . . . . . . INNOVATION . . . . . . . . . . . . . . . . . . . . . . . . .pg 141SJ3 . . . . . . . . . . . . FOUL WEATHER . . . . . . . . . . . . . . . . . . . . pg 1131SJ6 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 671SKA . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 311SKP . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 301SKV . . . . . . . . . . . INNOVATION . . . . . . . . . . . . . . . . . . . . . . . . .pg 151SLH . . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 291SNA . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 241SNB . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 241SNR . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 251SNS . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 261SNX . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 231SP2 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 501SP3 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 521SP4 . . . . . . . . . . . . FOUL WEATHER . . . . . . . . . . . . . . . . . . . . pg 1131SP6 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 521SP7 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 641SP9 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 701SPI . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 531SPQ . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 521SPU . . . . . . . . . . . FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 441SPV . . . . . . . . . . . INNOVATION . . . . . . . . . . . . . . . . . . . . . . . . .pg 131SQ4 . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . pg 1021SQ5 . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . pg 1021SQ8 . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . pg 1011SQA . . . . . . . . . . . FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 441SQB . . . . . . . . . . . FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 441SQN . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 621SQP . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 201SQT . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 211SQX . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 531SRE . . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . pg 1041SSH . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 331SSP. . . . . . . . . . . . PROGRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 321SSV . . . . . . . . . . . INNOVATION . . . . . . . . . . . . . . . . . . . . . . . . .pg 121ST2 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 541ST4 . . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . . .pg 981ST6 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 541ST8 . . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . pg 1011ST9 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 711SU8 . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . . .pg 98

1SX1 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 891SX4 . . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . pg 1051SX3 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 551SXA. . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 891SY1 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 891SY8 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 931XHK . . . . . . . . . . . FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 381XHP . . . . . . . . . . . FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 391XIG . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 661XIK . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 671XIP . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 651XSK . . . . . . . . . . . FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 401XSP . . . . . . . . . . . . FLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 411XT2 . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 551XTG. . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 571XTJ . . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 611XTK . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 561XTP . . . . . . . . . . . . TRADITION . . . . . . . . . . . . . . . . . . . . . . . . . . . .pg 512SA1 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 862SA3 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 862SA4 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 832SA5 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 832SA7 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 852SB4 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 842SB5 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 842XA1 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 852XA2 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 86395A . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 80396A . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 80397A . . . . . . . . . . . . FOUL WEATHER . . . . . . . . . . . . . . . . . . . . pg 1083SA3 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 763SA5 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 793SB3 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 773SD4 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 753SD7 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 793XA1 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 783XB1. . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 774SA5 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 944SA6 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 954SB2 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 934SB6 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 954SB7 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 904SB8 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 904SB9 . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 914SC1 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 914SC6 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 944SC7 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 914SC8 . . . . . . . . . . . . HEAD TO TOE . . . . . . . . . . . . . . . . . . . . . . . . .pg 945SA2 . . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . pg 1045SA3 . . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . pg 1045SA5 . . . . . . . . . . . . FOUL WEATHER . . . . . . . . . . . . . . . . . . . . pg 1145SA6 . . . . . . . . . . . . FOUL WEATHER . . . . . . . . . . . . . . . . . . . . pg 1145SA7 . . . . . . . . . . . . FOUL WEATHER . . . . . . . . . . . . . . . . . . . . pg 1145SA9 . . . . . . . . . . . . FOUL WEATHER . . . . . . . . . . . . . . . . . . . . pg 1155SAL . . . . . . . . . . . . SPECIAL APPLICATIONS . . . . . . . . . . pg 1055SB2 . . . . . . . . . . . FOUL WEATHER . . . . . . . . . . . . . . . . . . . . pg 114

127127

Fabriekstraat 23 • B-8850 Ardooie • BelgiumTel. +32 (0)51 740 800 • Fax. +32 (0)51 740 963

Pavillon Hermes • 110, AV. Gustave Eiffel Zi La Coupe 11100 Narbonne • France

Tel. +33 (0)4 68 42 35 15 • Fax. +33 (0)4 68 42 27 43

[email protected]

www.sip-protection.com

YKCS

PE15

15 415267 532570

Certificate Number10506-1501-1001

www.climatepartner.com

Documents

SIP Protection Защита от цепной пилы