SImplex Plate Holder DAN DIF DS 13 1003

7/28/2019 SImplex Plate Holder DAN DIF DS 13 1003

http://slidepdf.com/reader/full/simplex-plate-holder-dan-dif-ds-13-1003 1/10

Daniel® Simplex TM Orifice Plate Holders aresingle-chamber fittings which use universal size orificeplates and removable sealing units. Sealing units maybe the Daniel "DSC" Nitrile Dual Seal, the "TSC"

Teflon® Seal, the "MSC" all-metal seal or the "SNC"Snap Seat Ring combination of metal and Nitrile, eachof which is interchangeable. Body styles includeflangnek, welding neck, socket welding and threaded.

These fittings allow you to remove or insert the orificeplate quickly and economically. Since Simplex fittingsuse one piece bodies, there is no spillage in liquid

service, no rusted stud bolts, no nuts to remove, noflanges to spread apart and no line strain.

Operation of the Simplex Orifice Plate Holder is also

simple because of its few parts. The plate carrier ringis permanently attached to the sealing bar so that thebar, ring, plate and seal unit can all be removed at thesame time. The only other parts are the gasketclamping bar with it’s set screws and pipe plugs fortaps and drain.

Materials

Simplex Orifice Plate Holders are made of cast carbonor alloy steels, and types 304 and 316 stainless steel.Internal parts are trimmed in a variety of metals to suita variety of operating condition. When ordering, pleasespecify type of service.

Fittings in stock

All popular sizes, body styles and pressure ratings of Simplex Orifice Plate Holders are stocked for quick

delivery in warehouses around the world.

Daniel®

SimplexTM Orifice Plate Holders

Meter Tubes

Fabrication - Inspection

Close quality-control guarantee highly accuratefabrication of Simplex Meter Tubes. Special jigs andfixtures are used to assure precise alignment of tubeand fitting so there are no steps or offsets. All welds areground and micrometer readings are made.

Product Data SheetDAN-DIF-DS-13-1003October 2003

Testing -Coating

Radiography and hydrostatic testing is available. Aspecial quick-drying paint is applied as standard onSimplex Meter Tubes. Sand-blasting and corrosion-resistant coatings are also available at a nominalcharge.

Simplex Orifice Plate Holders



TYPE OF FITTING

A.N.S.I. Class A.P.I.

Class 150 Class 300 Class 600 Class 900 Class 1500 Class 2500 10,000 P.S.I.

"FLANGNEK"Raised-Face Flange

071C-DSC 073C-DSC 075C-DSC 076C-TSC 077C-TSC 078C-TS

"FLANGNEK"Ring-Joint Flange

0745C-DSC 0746C-TSC 0747C-TSC 0748C-TS

WELDING NECK 705C-DSC 706C-TSC 707C-TSC 708C-TS 709C-TS

SOCKET WELDING END 755C-DSC

THREADED (Female) 785C-DSC

Daniel Catalog Numbers

1 ½ " - 8" Class 150-2500 and3" - 4" A.P.I. 10,000 P.S.I., 15,000 ibs. test

“FLANGNEK” SOCKET WELDING

WELDING NECK THREADED

2




Simplex Parts and Dimensions

SIZE D i a m e t e r I n

t e r n a l L i n e

B o r e *

U p s t r e a m F

a c e o f

O r i f i c e P l a t e t o F a c e o f

E n d

D o w n s t r e a m

F a c e o f


F l a n g e

O v e r a l l F a c

e t o F a c e

D i a m e t e r o f H u b a t

P o i n t o f W e

l d i n g

C e n t e r l i n e t o B o t t o m

D i a m e t e r o f F l a n g e

D i a m e t e r o f B o l t C i r c l e

D i a m e t e r o f R a i s e d

F a c e

H e i g h t o f R

a i s e d F a c e

F l a n g e T h i c

k n e s s

N u m b e r a n d D i a m e t e r

o f S t u d s p e

r F l a n g e

L e n g t h o f S

t u d s w i t h 2

H e x N u t s

C e n t e r t o F

a c e o f 1 / 2 "

F l a n g e T a p s

O r i f i c e P l a t e T h i c k n e s s

( i n c h e s )

C e n t e r l i n e t o T o p

O p e r a t i n g C

l e a r a n c e

f r o m C e n t e r

A p p r o x i m a t

e W e i g h t

SIZA B C D J 1 K 1 J K L M N O R S T

Sch. 40 Catalog No. 071C-DSC - Class 150 - "Flangnek" w/Raised Face Flange Facing - 285 P.S.I. (Gage) C.W.P.

2" 2.067 3-9/16 3-9/16 7-1/4 2.38 3-9/16 6 4-3/4 3-5/8 1/16 3/4 4, 5/8 3-1/4 3-3/16 1/8 4-3/4 5-7/16 40 2

3" 3.068 3-11/16 3-11/16 7-1/2 3.50 4-1/16 7-1/2 6 5 1/16 15/16 4, 5/8 3-3/4 3-9/16 1/8 5-1/4 6 50 3

4" 4.026 4-7/16 4-7/16 9 4.50 4-1/2 9 7-1/2 6-3/16 1/16 15/16 8, 5/8 3-3/4 3-15/16 1/8 5-3/4 6-7/16 65 4

6" 6.065 5-1/16 5-1/16 10-1/4 6.63 5-3/4 11 9-1/2 8-1/2 1/16 1 8, 3/4 4 5-3/16 1/8 6-7/8 7-1/2 110 6

8" 7.981 5-1/2 5-1/2 10/1/4 8.63 7 13-1/2 11-3/4 10-5/8 1/16 1-1/8 8, 3/4 4-1/4 6-7/16 1/4 8-1/16 8-11/16 130 8


2" 2.067 3-9/16 3-9/16 7-1/4 2.38 3-9/16 6-1/2 5 3-5/8 1/16 7/8 8, 5/8 3-1/2 3-3/16 1/8 4-3/4 5-7/16 40 2

3" 3.068 3-11/16 3-11/16 7-1/2 3.50 4-1/16 8-1/4 6-5/8 5 1/16 1-1/8 8, 3/4 4-1/4 3-9/16 1/8 5-1/4 6 55 3

4" 4.026 4-7/16 4-7/16 9 4.50 4-1/2 10 7-7/8 6-3/16 1/16 1-1/4 8, 3/4 4-1/2 3-15/16 1/8 5-3/4 6-7/16 75 4

6" 6.065 5-1/16 5-1/16 10-1/4 6.63 5-3/4 12-1/2 10-5/8 8-1/2 1/16 1-7/16 12, 3/4 5 5-3/16 1/8 6-7/8 7-1/2 125 6

8" 7.987 6 6 12-1/4 8.63 7 15 13 10-5/8 1/16 1-5/8 12, 7/8 5-1/2 6-7/16 1/4 8-1/16 8-11/16 145 8


2" 2.067 3-15/16 3-15/16 8 2.38 3-9/16 6-1/2 5 3-5/8 1/4 1-1/4 8, 5/8 4-1/4 3-3/16 1/8 4-3/4 5-7/16 45 2

3" 3.068 4-7/16 4-7/16 9 3.50 4-1/4 8-1/4 6-5/8 5 1/4 1-1/2 8, 3/4 5 3-11/16 1/8 5-1/4 6 70 3

4" 4.026 4-15/16 4-15/16 10 4.50 4-11/16 10-3/4 8-1/2 6-3/16 1/4 1-3/4 8, 7/8 5-3/4 4-1/8 1/8 5-3/4 6-7/16 100 4

6" 6.065 5-11/16 5-11/16 11-1/2 6.63 5-3/4 14 11-1/2 8-1/2 1/4 2-1/8 12, 1 6-3/4 5-3/16 1/8 6-7/8 7-1/2 155 6

8" 7.987 6-7/8 6-7/8 14 8.63 7 16-1/2 13-3/4 10-5/8 1/4 2-7/16 12, 1-1/8 7-3/4 6-7/16 1/4 8-1/16 8-11/16 175 8

Sch. 80 Catalog No. 076C-TSC - Class 900 - "Flangnek" w/Raised Face Flange Facing - 2220 P.S.I. (Gage) C.W.P.

2" 1.939 5-5/16 5-5/16 10-3/4 2.38 3-13/16 8-1/2 6-1/2 3-5/8 1/4 1-3/4 8, 7/8 5-3/4 3-7/16 1/8 4-3/4 5-3/4 70 2

3" 2.900 5-7/16 5-7/16 11 3.50 4-3/8 9-1/2 7-1/2 5 1/4 1-3/4 8, 7/8 5-3/4 3-15/16 1/8 5-1/4 6-1/4 80 3

4" 3.826 5-13/16 5-13/16 11-3/4 4.50 4-7/8 11-1/2 9-1/4 6-3/16 1/4 2 8, 1-1/8 6-3/4 4-1/2 1/8 5-3/4 7-1/4 125 4

6" 5.761 6-5/16 6-5/16 12-3/4 6.63 6-1/8 15 12-1/2 8-1/2 1/4 2-7/16 12,1/8 7-3/4 5-5/8 1/8 6-7/8 8-3/8 269 6

Sch. 80 Catalog No. 077C-TSC - Class 1500 - "Flangnek" w/Raised Face Flange Facing - 3705 P.S.I. (Gage) C.W.P.

2" 1.939 5-13/16 5-13/16 11-3/4 2.38 3-13/16 8-1/2 6-1/2 3-5/8 1/4 1-3/4 8, 7/8 5-3/4 3-7/16 1/8 5-9/16 6-1/4 65 2

3" 2.900 6-7/16 6-7/16 13 3.50 4-9/16 10-1/2 8 5 1/4 2-1/8 8, 1-1/2 7 4 1/8 6-1/16 6-7/8 125 3

4" 3.826 7 7 14-1/8 4.50 5 12-1/4 9-1/2 6-3/16 1/4 2-3/8 8, 1-1/4 7-3/4 4-5/8 1/8 6-9/16 8 208 4

6" 5.761 8-13/16 8-13/16 17-3/4 6.63 6-1/2 15-1/2 12-1/2 8-1/2 1/4 3-1/2 12,1-3/8 10-1/4 6 1/8 7-11/16 9-1/2 440 6

Sch. 160 Catalog No. 078C-TSC - Class 2500 - "Flangnek" w/Standard Flange Facing - 6170 P.S.I. (Gage) C.W.P.

2" 1.689 6-7/16 6-7/16 13 2.38 4-1/8 9-1/4 6-3/4 3-5/8 1/4 2-1/4 8, 1 7 3-5/8 1/8 5-9/16 6-1/4 80 2

3" 2.626 7-5/16 7-5/16 14-3/4 3.50 4-13/16 12 9 5 1/4 2-7/8 8, 1-1/4 8-3/4 4-3/16 1/8 6-1/16 6-7/8 185 3

4" 3.438 8-1/16 8-1/16 16-1/4 4.50 5-7/16 14 10-3/4 6-3/16 1/4 3-1/4 8, 1-1/2 10 5 1/8 6-9/16 8 285 4

6" 5.189 10-3/4 10-3/4 21-5/8 6.63 7-5/16 19 14-1/2 8-1/2 1/4 4-1/2 8, 2 13-3/4 6-1/2 1/8 7-11/16 9-1/2 764 6

*Other bores available on special request. For 8" Class 900-2500 dimensions, consult factory.

"Flangnek" Raised-Face Simplex

3




"Flangnek" Ring-Joint Simplex

S I Z E ( I n c h e s )

A . P . I . R i n g N u m b e r

D i a m e t e r I n t e r n a l L i n e

B o r e *

U p s t r e a m F a c e o f O r i f i c e

P l a t e t o F a c e o f E n d

D o w n s t r e a m F a c e o f


F l a n g e

O v e r a l l F a c e t o F a c e

D i a m e t e r o f H u b a t P o i n t o f

W e l d i n g


D i a m e t e r o f F l a n g e

D i a m e t e r o f B o l t C i r c l e

P i t c h D i a m e t e r o f R i n g a n d

G r o o v e

D e p t h o f G r o o v e

W i d t h o f G r o o v e

F l a n g e T h i c k n e s s

N u m b e r a n d D i a m e t e r o f

S t u d s p e r F l a n g e

L e n g t h o f S t u d s w i t h 2 H e x

N u t s

C e n t e r t o F a c e o f 1 / 2 ”

F l a n g e T a p s



O p e r a t i n g C l e a r a n c e f r o m

C e n t e r

A p p r o x i m a t e W e i g h t

( P o u n d s ) S

I Z E

A B C D J 1 K 1 J K L1 M1 M2 N O R S T

Sch. 40 Catalog No. 0745C-DSC -- Class 600 -- “Flangnek” w’Ring-J oint Face Flange Facing -- 1480 P.S.I. (Gage) C.W.P.

2” R-23 2.067 4 4 8-1/8 2.38 3-9/16 6-1/2 5 3-1/4 5/16 15/32 1-5/16 8, 5/8 4-1/2 3-3/16 1/8 4-3/4 5-7/16 46 6”

3” R-31 3.068 4-1/2 4-1/2 9-1/8 3.50 4-1/4 8-1/4 6-5/8 4-7/8 5/16 15/32 1-9/16 8, 3/4 5-1/4 3-11/16 1/8 5-1/4 6 70 8”

4” R-37 4.026 5 5 10-1/8 4.50 4-11/16 10-3/4 8-1/2 5-7/8 5/16 15/32 1-13/16 8, 7/8 6 4-1/8 1/8 5-3/4 6-7/16 100 4”

6” R-45 6.065 5-3/4 5-3/4 11-5/8 6.63 5-3/4 14 11-1/2 8-5/16 5/16 15/32 2-3/16 12, 1 7 5-3/16 1/8 6-7/8 7-1/2 155 6”

8” R-49 7.981 6-15/16 6-15/16 14-1/8 8.63 7 16-1/2 13-3/4 10-5/8 5/16 15/32 2-1/2 12, 1-1/8 8 6-7/8 1/4 8-1/16 8-11/16 175 8”

Sch. 80 Catalog No. 0746C-TSC -- Class 900 -- “Flangnek” w’Ring-J oint Face Flange Facing -- 2200 P.S.I. (Gage) C.W.P.

2” R-24 1.939 5-3/8 5-3/8 10-7/8 2.38 3-13/16 8-1/2 6-1/2 3-3/4 5/16 15/32 1-13/16 8, 7/8 6 3-7/16 1/8 4-3/4 5-3/4 70 2”

3” R-31 2.900 5-1/2 5-1/2 11-1/8 3.50 4-3/8 9-1/2 7-1/2 4-7/8 5/16 15/32 1-13/16 8, 7/8 6 3-15/16 1/8 5-1/4 6-1/4 95 3”

4” R-37 3.826 5-7/8 5-7/8 11-7/8 4.50 4-7/8 11-1/2 9-1/4 5-7/8 5/16 15/32 2-1/16 8, 1-1/8 7 4-1/2 1/8 5-3/4 7-1/4 135 4”

6” R-45 5.761 6-3/8 6-3/8 12-7/8 6.63 6-1/8 15 12-1/2 8-5/16 5/16 15/32 2-1/2 12, 1-1/8 8 5-5/8 1/8 6-7/8 8-3/8 275 6”

Sch. 80 Catalog No. 0747C-TSC -- Class1500 -- “Flangnek” w’Ring-J oint Face Flange Facing -- 3705 P.S.I. (Gage) C.W.P.

2” R-24 1.939 5-7/8 5-7/8 11-7/8 2.38 3-13/16 8-1/2 6-1/2 3-3/4 5/16 15/32 1-13/16 8, 7/8 6 3-7/16 1/8 5-9/16 6-1/4 85 2”

3” R-35 2.900 6-1/2 6-1/2 13-1/8 3.50 4-7/16 10-1/2 8 5-3/8 5/16 15/32 2-3/16 8, 1-1/8 7-1/4 4 1/8 6-1/16 6-7/8 135 3”

4” R-39 3.826 7-1/16 7-1/16 14-1/4 4.50 5 12-1/4 9-1/2 6-3/8 5/16 15/32 2-7/16 8, 1-1/4 8 4-5/8 1/8 6-9/16 8 190 4”

6” R-46 5.761 8-15/16 8-15/16 18 6.63 6-1/2 15-1/2 12-1/2 8-5/16 3/8 17/32 3-5/8 12, 1-3/8 10-1/2 6 1/8 7-11/16 9-1/2 440 6”

Sch. 160 Catalog No. 0748C-tSC -- Class 2500 -- “Flangnek” w’Ring-J oint Face Flange Facing -- 6170 P.S.I. (Gage) C.W.P.

2” R-26 1.689 6-1/2 6-1/2 13-1/8 2.38 4-1/8 9-1/4 6-3/4 4 5/16 15/32 2-5/16 8, 1 7-1/4 3-5/8 1/8 5-9/16 6-1/4 105 2”

3” R-32 2.626 7-7/16 7-7/16 15 3.50 4-15/16 12 9 5 3/8 17/32 3 8, 1-1/4 9 4-3/16 1/8 6-1/16 6-7/8 195 3”

4” R-38 3.438 8-1/4 8-1/4 16-5/8 4.50 5-1/2 14 10-3/4 8-3/16 7/16 21/32 3-7/16 8, 1-1/2 10-1/2 5 1/8 6-9/16 8 285 4”

6” R-47 5.189 11 11 22-1/8 6.63 7-1/4 19 14-1/2 9 1/2 25/32 4-3/4 8, 2 14-1/4 6-1/2 1/8 7-11/16 9-1/2 775 6”

*Other bores available on special requestFor 8” Class 900-500 dimensions, consult factory





Welding Neck Simplex

SIZE(Inches)

D i a m e t e r I n t e r n a l

L i n e B o r e *

U p s t r e a m F a c e o f

O r i f i c e P l a t e t o F a c e

o f E n d

D o w n s t r e a m F a c e o

f

O r i f i c e P l a t e t o F a c e

o f E n d



P o i n t o f W e l d i n g


C e n t e r t o F a c e o f

1 / 2 ” F l a n g e T a p s

O r i f i c e P l a t e

T h i c k n e s s


O p e r a t i n g C l e a r a n c e

F r o m C e n t e r


( P o u n d s )

SIZEA B C D J 1 K 1 O R S T

Sch. 40 Catalog No. 705C-DSC - Class 600 - Welding Neck Ends- 1480 P.S.I. (Gage) C.W.P.

1-1/2” 1.610 3-1/16 3-1/16 6-1/4 1.90 2-3/4 2-3/8 1/8 3-15/16 3-7/8 25 1-1/2”

2” 2.067 3-9/16 3-9/16 7-1/4 2.38 3-9/16 3-3/16 1/8 4-3/4 5-7/16 40 2”

3” 3.068 3-11/16 3-11/16 7-1/2 3.50 4-1/4 3-11/16 1/8 5-1/4 6 50 3”

4” 4.026 4-7/8 4-7/8 9 4.50 4-11/16 4-1/8 1/8 5-3/4 6-7/16 65 4”6” 6.065 5-1/16 5-1/16 10-1/4 6.63 5-3/4 5-2/16 1/8 6-7/8 7-1/2 100 6”

8’ 7.981 6-7/8 6-7/8 14 8.63 7 6-7/16 1/4 8-1/16 8-11/16 120 8’

Sch. 80 Catalog No. 706C-TSC - Class 900 - Welding Neck Ends- 2220 P.S.I. (Gage) C.W.P.

3” 1.939 5-5/16 3-1/16 10-3/4 2.38 3-13/16 3-7/16 1/8 4-3/4 5-3/4 50 2”

4” 2.900 5-7/16 3-9/16 11 3.50 4-3/8 3-15/16 1/8 5-1/4 6-1/4 70 3”

6” 3.826 5-13/16 3-11/16 11-3/4 4.50 4-7/8 4-1/2 1/8 5-3/4 7-1/4 90 4”

6” 5.761 6-5/16 4-7/8 12-3/4 6.63 6-1/8 5-5/8 1/8 6-7/8 8-3/8 156 6”


2” 1.939 5-13/16 5-13/16 11-3/4 2.38 3-13/16 3-7/16 1/8 5-9/16 6-1/4 65 2”

3” 2.9003.826 6-7/16 6-7/16 13 3.50 4-9/16 4 1/8 6-1/16 6-7/8 100 3”

4” 5.761 7 7 14-1/8 4.50 5 4-5/8 1/8 6-9/16 8 120 4”

6” 5.761 8-13/16 8-13/16 17-3/4 6.63 6-1/2 6 1/8 7-11/16 9-1/2 300 6”


2” 1.689 6-7/16 6-7/16 13 2.38 4-1/8 3-5/8 1/8 5-9/16 6-1/4 75 2”

3” 2.626 7-5/16 7-5/16 14-3/4 3.50 4-13/16 4-3/16 1/8 6-1/16 6-7/8 120 3”

4” 3.438 8-1/16 8-1/16 16-1/4 4.50 5-7/16 5 1/8 6-9/16 8 175 4”

6” 5.189 10-3/4 10-3/4 21-5/8 6.63 7-5-16 6-1/2 1/8 7-11/16 9-1/2 480 6”

*Other bores available on special requestFor 8” Class 900-2500 dimensions, consult factory




Socket Weld and Threaded Simplex

SIZE(Inches)

D i a m e t e r o f I n t e r n a l L i n e

B o r e *

U p s t r e a m F a c e o f O r i f i c e

P l a t e t o F a c e o f E n d

D o w n s t r e a m F a c e o f


E n d



C e n t e r t o F a c e o f 1 / 2 ”

F l a n g e T a p s



O p e r a t i n g C l e a r a n c e

F r o m C e n t e r

D i a m e t e r o f R e c e s s

D e p t h o f R e c e s s


( P o u n d s )

SIZEA B C D K1 O R S T U W

Catalog No, 755C-DSC - Class 600 - Socket Welding Ends** - 1480 P.S.I. (Gage) C.W.P.

1-1/2” 1.610 3-1/16 3-1/16 6-1/4 2-3/4 2-3/8 1/8 3-15/16 3-7/8 1-15/16 5/8 27 1-1/2”

2” 2.067 3-8/16 3-8/16 7-1/4 3-9/16 3-3/16 1/8 4-3/4 5-7/16 2-27/64 11/16 40 2”

3” 3.068 3-11/16 3-11/16 7-1/2 4-1/4 3-11/16 1/8 5-1/4 6 3-35/64 13/16 50 3”

4” 4.026 4-7/16 4-7/16 9 4-11/16 4-1/8 1/8 5-3/4 6-7/16 4-35/64 15/16 65 4”

6” 6.065 5-1/16 5-1/16 101/4 5-3/4 5-3/16 1/8 6-7/8 7-1/2 6-11/16 1-1/16 100 6”

Catalog No, 785C-DSC - Class 600 - Threaded Ends (Female) ** - 1480 P.S.I. (Gage) C.W.P.

1-1/2” 1.610 3-1/16 3-1/16 6-1/4 2-3/4 2-3/8 1/8 3-15/16 3-7/8 1-15/16 5/8 27 1-1/2”

2” 2.067 3-8/16 3-8/16 7-1/4 3-9/16 3-3/16 1/8 4-3/4 5-7/16 2-27/64 11/16 40 2”

3” 3.068 3-11/16 3-11/16 7-1/2 4-1/4 3-11/16 1/8 5-1/4 6 3-35/64 13/16 50 3”

4” 4.026 4-7/16 4-7/16 9 4-11/16 4-1/8 1/8 5-3/4 6-7/16 4-35/64 15/16 60 4”

*Other bores available on special request.** Meter tubes assembled with socket weld or threaded fittings will not meet all the requirements of API 14.3 (AGA #3).




Simplex Parts and Materials List

Part

No. Description Material

No.

Required

4 Body Cast Carbon Steel - A216 WCB (Class 150-2500) 1

4XHP Body Cast Carbon Steel - A487 GRI CL C (A.P.I. 10,000 P.S.I.) 1

8NOrifice Plate Carrier(Patented)

Stainless Steel 1

8E-DSC*8TSC*

Orifice Plate Sealing UnitsSynthetic Rubber (STD. Class 150-600) (Patented)

Teflon® (STD. Class 900-2500) (Patented)1

9CFSealing Bar Gasket(“Compo-Flex”)

Synthetic Composition (Class 1500 & 2500) 1

11 Clamping Bar Screws Heat Treated Alloy Steel (Chemically Treated) (Class 150-900)See Chart

Page 8

11XHP Clamping Bar ScrewsHeat Treated Alloy Steel (Chemically Treated)(Class 1500-2500 & A.P.I. 10,000 P.S.I. )

See ChartPage 8

12 Clamping Bar C.R.S. (Chemically Treated ) (Class 150-900) 1

12HP Clamping Bar C.R.S. (Chemically Treated ) (Class 1500-2500) 1

12XHP Clamping Bar Carbon Alloy Steel (A.P.I. 10,000 P.S.I.) 1

13 Orifice Plate Type 304 Stainless Steel 1

30* Drain Valve Plug C.R.S. 1

31*1/2” N.P.T. Plugs for

Meter Pressure Tap HolesC.R.S.

4

8 Type T

35 Sealing Bar C.R.S. (Chemically Treated) (Class 150 900) 1

35HP Sealing Bar C.R.S. (Chemically Treated) (Class 1500 2500) 1

35 XHP Sealing Bar Carbon Alloy Steel (A.P.I. 10,000 P.S.I.) 1

36 Sealing Bar Gasket Composition 1

36XHP Sealing Bar Gasket Composition 1

37* Plate Carrier Cap Screws Standard Trim is Stainless Steel 2

38*Plate Carrier Cap Screw

Lock Washers

Standard Trim is Stainless Steel 2

51Sealing Bar and BodyDowel Pin

Type 303 Stainless Steel 1

* Indicates parts are interchangeable.

7




Clamping Bar Set Screws

Size(Inches)

A.N.S.I. Class

A.P.I. 10,000 P.S.I.15,000 P.S.I. TestClass 150, 300, 600 Class 900 Class 1500 Class 2500

1-1/2” 3 - -

2” 4 4 8 8

3” 4 4 10 10 14

4” 5 6 12 12 14

6” 6 6 14 14

8” 8 8 -

Number Required (Part No. 11 and 11XHP)

High-Pressure Simplex

3" - 4" A .P.I. 10,000 P.S.I. , 15,000 P.S.I.Test

This Simplex Orifice Plate Holder is designed formeasurement at high pressure wells, on injectionsystems and recycling operations. Heavy-dutyconstruction throughout enables the fitting to handle

flows at 10,000 P.S.I. The body is made of high-strength cast carbon steel. Aspecially designedtop closure seals off the fitting. The orifice plate sealingunit material is Teflon®. An alternate metal seat isavailable.

SIZE(Inches)

D i a m e t e r I n t e r

n a l

L i n e B o r e

U p s t r e a m F a c e o f

O r i f i c e P l a t e F

a c e

T o E n d

D o w n s t r e a m F

a c e

o f O r i f i c e P l a t e

T o F a c e o f E n d

O v e r a l l F a c e t o

F a c e


P o i n t o f W e l d i n g

C e n t e r l i n e t o

B o t t o m

C e n t e r t o F a c e o f

1 / 2 ” F l a n g e T a

p s

O r i f i c e P l a t e

T h i c k n e s s

C e n t e r l i n e t o T

o p

O p e r a t i n g

C l e a r a n c e F r o

m

C e n t e r

A p p r o x i m a t e w

e i g h t

( P o u n d s )

SIZE(Inches)

A B C D J 1 K1 O R S T

Catalog No. 709C-TSC - A.P.I. 100,000 P.S.I. - Welding Neck - 15,000 P.S.I. Test

3” * 8-3/16 8-3/16 16-1/2 3.50 5-7/16 4-15/16 1/8 7-1/16 7-7/8 190 3”

4” * 8-1/16 8-1/16 16-1/4 4.50 6-7/8 6-3/8 1/8 7-9/16 6-3/8 292 4”

* To be specified by customer


8



Simplex Plate Changing

9

The Daniel Simplex Orifice Plate Holder is expressly

designed for fast, safe and easy plate inspection orchange with a minimum of line shut-down time. Onlythese steps are required:

(1) De-pressurize and bypass or shut in the line(2) Slowly loosen the clamping bar set screws(3) Lightly tap the sealing bar to break the gasket

seal(4) Slide out the clamping bar(5) Lift out the sealing bar-plate carrier ring

containing the orifice plate and sealing unit(6) Remove the sealing bar gasket

To resume measurement, install a new sealing bargasket, simply reverse the above procedure. As thesealing bar plate carrier ring is inserted, the indexhole in the bar fits over a dowel pin in the fitting body.

This indexing feature assures the operator that theorifice plate is fully seated and concentric with theline bore. Replace clamping bar and tighten setscrews before gradually repressurizing the meter

tube.

9



http://slidepdf.com/reader/full/simplex-plate-holder-dan-dif-ds-13-1003 10/10©2003D i lM t dC t l I ll i ht d P i t d i USA DAN DIF DS 13 1003

Daniel is a wholly owned subsidiary of Emerson Electric Co., and a division of Emerson Process Management. The Daniel logo is a registered trademark of DanielIndustries, Inc. The Emerson logo is a registered trademark and service mark of Emerson Electric Co. The contents of this publication are presented forinformational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express orimplied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time. Daniel does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use andmaintenance of any Daniel product remains solely with the purchaser and end-user.

Daniel Division Headquarters

Houston, Texas, USA, Calgary, Alber ta, Canada, Singapore - Asia Paci fic,

T: 713-467-6000, F: 713-827-3880 T: 403-279-1879, F: 403-236-1337 T: +65-6777-8211, F: +65-6770-8001

Stirling, Scotland - UK, Mid-East, Africa, USA Toll Free 1-888-FLOW-001 www.daniel.com

T: +44 01786 433400, F: +44 01786 433401


Documents

SImplex Plate Holder DAN DIF DS 13 1003