Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.FiltrationGroup.com
Simplex filterEG1With threaded connection, rated pressure up to 16 bar (232 psi)Connection sizes: G3/4" to G2", cast design
1. Features
High-performance filters for modern systems
_
Entry-level model among Filtration Group GmbH products
Used as a protective or safety filter in shipping and industry
Simple, robust design
Compact design
Minimal pressure drop through optimal flow design
Elements with high differential pressure stability and dirt holding
capacity
Filter ratings from 25 to 5000 µm absolute,
other ratings on request
Suitable for use with fluids of all types
Easy to service
Worldwide distribution
Simplex filter EG1 2
2. Operating principle
The medium flows through the filter element (perforated, smooth
or pleated) from the inside to the outside.
Contaminants are trapped on the inside of the element.
The filtration process is interrupted when a settable fouling
threshold is reached.
The filter is opened and the element removed for cleaning.
Simplex filters require no maintenance apart from cleaning the
filter elements and inspecting the seals.
3. Technical Data
Connection: G¾“ to G2“
Material: Nodular cast iron 40
Max. operating pressure: 16 bar
Test overpressure: 24 bar
Max. operating
temperature: 120 °C
Filter element: Screen basket
(perforated, smooth or pleated)
Filter rating: 25 to 5000 µm absolute,
other ratings on request
4. Dimensions
s = Vent
t = Drain
Z = Clearance required
All dimensions except "DN", "s" and "t" in mm.
Type DN a b c h Ø p s t Z
Weight
[kg]
AE45T210A02 G3/4 131 65 130 185 70 - G3/8 275 3.0
AE46T210A03 G1 150 75 150 215 90 G1/8 G3/4 315 5.0
AE47T210A04 G1 1/4 201 90 180 265 90 G1/8 G3/4 420 6.0
AE48T210A05 G1 1/2 263 100 235 340 126 G1/4 G1 535 11.0
AE49T210A05 G2 263 100 235 340 126 G1/4 G1 535 11.0
Simplex filter EG1 3
5. Design and application
A wide range of filter elements are available for every filter. The ma-
terial, type of construction and filter surface and rating are expertly
adapted to the specific filtration task based on the medium and ca-
pacity.
Each filter can be supplied with various options to ensure the optim-
um performance for each particular application.
Options:
Heating with steam/thermal oil or electric
Magnetic elements
Differential pressure indicator/switch as a removable part
Simplex filters are not at all complicated to use. The necessary steps
are described in the following:
The filter comprises a cylindrical housing, a cover and a filter
element. It is fitted with a vent screw and a drain plug.
Stress relief must be provided for all pipe connections. The filter
must be filled and vented before it is put into service. Install the
filter piping so that the medium flows through the filter in the
direction indicated by the arrow.
During the filtration process, the medium flows through the filter
element from the inside to the outside. Contaminants are trapped
on the inside of the element. As the filter element becomes
increasingly dirty, the flow resistance rises accordingly. The de-
gree of fouling is indicated on the differential gauge (optional).
The filter element must be cleaned when the pressure difference
reaches 0.7 bar.
In order to remove the filter element, loosen the cover fastening
nuts on the depressurised filter and lift off the cover. The dirty
element can then be withdrawn without any problems.
To clean the filter element, either blow it out with compressed
air, steam or water or brush it with a soft brush. Be careful not to
damage the filter fabric or the perforated sheet and avoid pushing
the element inwards as it is blown out. Pre-treat the element with
a suitable solvent if the dirt deposits cannot be removed easily.
Simplex filter EG1 4
6. Type number key
Type number key with selection example for EG1 simplex filter with G½" to G2" threaded connection
Main product group
A Simplex filter, cast design
Series
E Simplex filter with filter element
Inlet and outlet connections
45 G¾" threaded connection
46 G1" threaded connection
47 G1¼" threaded connection
48 G1½" threaded connection
49 G2" threaded connection
Filter connection standard + rated pressure
T PN 16 bar
Position of main connections
2 Opposite each other on the same axis
Cover fastening
1 Stud bolts or hexagon screws
Options
0 Standard version
2 Electric cartridge heater
3 Steam/thermal cartridge heater
7 Version without non-ferrous metals
Type of inner assembly
A Filter elements for simplex filter
Inner assembly size
XX
Housing version
2 Nodular cast iron
Nozzle material
0 No material specified (not assigned)
Number for special types or design features
XX
A E 45 T 2 1 0 A 02 2 0 00
-
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
LEER
Filtration Group GmbH
Schleifbachweg 45
D-74613 Öhringen
Phone +49 7941 6466-0
Fax +49 7941 6466-429
www.filtrationgroup.com
70381728.11/2016