Upload
hamien
View
213
Download
0
Embed Size (px)
Citation preview
A
B
C
D
The 4 part system
!
Product catalogue
International
Simple!Safe! Convincing!
EN 1253
Forbackgroundstories,furthertechnicalspecificationsand drawings please visit www.unidrain.com Call unidrain® customer service for advice and guidance on +45 3910 1030 or send an E-mail to [email protected]
unidrain® A/SFarum Gydevej 71DK-3520 Farum
T +45 3910 1010T +45 3910 1030 customer serviceF +45 3910 [email protected]
When you choose unidrain®, you choose a one-of-a-kind solution that is both easier and quicker to work with than other products in the marketplace.Wewerethefirsttomovethefloordraincompletelyup against the wall, providing a single-sided slope solutiontogetherwithasimple,efficientwaterproofinstallation. unidrain® is placed up against the wall and becauseitsfixedtothewall,thepatentedverticalwallflangesensureatotallywatertightoverlapwiththe wall membrane. Similarly,thehorizontalfloorflangesensurewatertightoverlapwiththefloormembrane.unidrain® is tested and approved for all types of wetroomfloors,fromlightweightwoodjoiststoheavy concrete constructions. If you are mounting intowoodjoistsandotherlightweightfloorconstructions, we recommend using the unidrain®
Mounting Set.
ClassicLine with Column grate
03
Introduction
ClassicLineSee product range on pages 18 to 20
unidrain® offers two product lines for the top, visible part of floor drains: ClassicLine and HighLine.
ClassicLineThis simple product line is available in stylish, brushed, stainless steel. Five different grate designs ensure that there is a product to suit all tastes. With ClassicLine, the frame is mandatory, as the grate is supported by the frame.
HighLineThe traditional grate is replaced by three alternative solutions in the shape of Panel, Cassette and Custom. Panel is a stainless steel, Corian® or frosted glas solution. Cassette and Custom enable a matching floor tile to be cut and fitted into the floor drain so it almost becomes invisible. With the HighLine series, the frame is optional.
Live out your design dreams
HighLine frameChoose model length: 300 -1,200 mmH: 10, 12, 15, 25 mm(the frame is optional)
HighLine panelChoose from 3 solutions: Panel, Cassette or Custom
ClassicLine grateChoose between five designs: Classic, Column, Inca, Square and Stripe.
ClassicLine frameChoose model length: 300 -1,200mmH: 8, 10, 12 mm(the frame is mandatory)
Drain unit [wall]Choose model length: 300 -1,200 mm(for lengths over 1,200 mm, we refer to Module 1100 )
Outlet unitChoose from a wide selection
HighLineSee product range on pages 22 to 25
unidrain® Line
unidrain® Corner
04
1
2
Waterproof floor drainWall membrane
Tile mortar
Drain unit
Outlet unit
Grate
Strainer
Tile mortar
Tiles/tiled bricks
Floor flange
Water trap
Floor membrane
frame
Reinforcement
Reinforcement
unidrain® is placed against the wall. Fixed to the wall, the vertical wall flanges ensure a completely waterproof overlap with the membrane.Similarly, the vertical floor flanges ensure the floor is waterproof by overlapping the floor membrane.
Structure [wall]
For all types of structures
Tiles/tiled bricks
Fastening
Wall flange
Floor flange
Reinforcement
Floor membrane
Wall membrane
Reinforcement
Wall flange
2
1
unidrain® is tested and approved for internal fitting with all types of floor structures for wet rooms with tiles, heavy concrete structures and lightweight wooden floor joists. For mounting in wooden floor joists and other lightweight floor constructions, we recommend using the unidrain® Mounting Set (see page 9).For all structures, the materials and building methods used must be suited to and approved for use in a wet room.Detailed building guidelines can be downloaded from www.unidrain.com
Building examples:
1. ConcreteIn-situ concrete on a stable poured foundation with a base made from concrete or other suitable base material. Waterproofing system such as lubrication membrane with sealing tape/ reinforcement tape. Tile/tiled brick flooring.
2. Wooden floor joists with floor plateWooden floor joists with 22 mm floor plate (plywood or similar).Waterproofing system such as lubrication membrane with sealing tape/ reinforcement tape. Tile/tiled brick flooring.Shown with Mounting Set 22 mm (see page 9).
05
1
2
3
4
5
EN 1253EN 1253
(Complies with European standards for floor drains)
Reliable resultBecause unidrain® is placed against the wall, it only requires a single-sided slope as opposed to the traditional four-sided incline. It is thus easier to produce a correct base without the risk of depressions or reverse slope.The result is a completely level floor surface. This makes it easier to lay large tiles that do not require cutting around the drain. The end result is both waterproof and reliable.
Building method:
1. Simple and precise fitting and mountingSimple and easy fitting with precise mounting ensures correct placement throughout the entire building process.
2. Fixation during pouringThe drain unit is fixed throughout the entire pouring process, ensuring it does not move. Placement against the wall, away from the work area, eases the task of reinforcement and floor heating.
3. Easy production of a base with one-sided slopeA one-sided base makes it easier to produce a correct base without the risk of reverse slope and depressions. The base for the tiled surface is thus completely even and smooth.
4. Wet room secure connection with wall and floorThe overlap of the membrane with the floor and wall flanges of the drain forms a waterproof and wet room secure seal with the floor and wall.
5. Easy tile fitting on a totally flat surfaceThe completely smooth surface makes tile laying easy, even with very large tiles. It is not necessary to cut the tiles to fit around the drain.
Structure [wall]
Facts about unidrain®
unidrain® is tested and approved in accordance with the new European Standard EN 1253 and tested and approved by the Danish Building Research Institute SBi for secure watertight connection with the wall.For more information about approvals and certification, please visit www.unidrain.comunidrain®'s unique construction is patented in Europe (1287213) and awaiting patent approval in several countries world-wide.unidrain® is a registered trademark.
06
1001 1002
!
Line 1001 Line 1002
Drain unit against rear wall and right wall.
For shower cubicle with three fixed walls.
The drain unit has two wall flanges and two floor flanges.
Drain unit against rear wall and left wall.
For shower cubicle with open left side, glass wall or similar.
The drain unit has two wall flanges and two floor flanges.
Usage: Line drain Line drain
Wall flange Rear wall/left/right Rear wall/left
Module length: 700 mm 800 mm 900 mm 1,000 mm 1,200 mm 700 mm 800 mm 900 mm 1,000 mm 1,200 mm
Length (L): 702 mm 802 mm 902 mm 1,002 mm 1,202 mm 757 mm 857 mm 957 mm 1,057 mm 1,257 mm
Centre (C): 351 mm 401 mm 451 mm 501 mm 601 mm 351 mm 401 mm 451 mm 501 mm 601 mm
Height (H): 17 mm 18 mm 19 mm 20 mm 22 mm 17 mm 18 mm 19 mm 20 mm 22 mm
Frame (R): 695 mm 795 mm 895 mm 995 mm 1,195 mm 695 mm 795 mm 895 mm 995 mm 1,195 mm
Item No.: 1001.0700 1001.0800 1001.0900 1001.1000 1001.1200 1002.0700 1002.0800 1002.0900 1002.1000 1002.1200
EAN No.*: 3030 3047 3054 3061 3078 3085 3092 3108 3115 3122
Drain unit [wall]
Total construction height (excl. frame/grate) = height of the outlet unit + (H).(H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.Shown with ClassicLine frame/grate.
Against wall for walled shower cubicle.
Against wall for two-walled shower cubicle, open/glass on the right side.
*570769200xxxx
SpecificationMaterial: Stainless steel (AISI 304)Surface: PickledDimension: 1.5 mmMembrane: Lubrication membrane or sheet membranes.Floor construction: Concrete/woodFloor covering: Tile/tile bricks
IntroductionPlaced against wall – with rear flange.Choose from 4 line units depending on placement. For line units over 1,200 mm, we refer to Module 1100 (see page 30).For line unit mounted freely into floor, we refer to series 3000 (see page 33).
(L)(R)
150
57
(C)
80
(H)
(L)(R)
150
57
(C)
80
(H)
07
1003 1004
Line 1003 Line 1004
Drain unit against rear wall and right wall.
For shower cubicle with open left side, glass wall or similar.
The drain unit has two wall flanges and two floor flanges.
Drain unit for open bathrooms and non-standard dimensions.
Can be freely positioned against rear wall, independent of any side walls.
The drain unit has two wall flanges and two floor flanges.
Usage: Line drain Line drain
Wall flange Rear wall/right Rear wall
Module length: 700 mm 800 mm 900 mm 1,000 mm 1,200 mm 300 mm 700 mm 800 mm 900 mm 1,000 mm 1,200 mm
Length (L): 757 mm 857 mm 957 mm 1,057 mm 1,257 mm 432 mm 812 mm 912 mm 1,012 mm 1,112 mm 1,312 mm
Centre (C): 351 mm 401 mm 451 mm 501 mm 601 mm 216 mm 406 mm 456 mm 506 mm 556 mm 656 mm
Height (H): 17 mm 18 mm 19 mm 20 mm 22 mm 12 mm 17 mm 18 mm 19 mm 20 mm 22 mm
Frame (R): 695 mm 795 mm 895 mm 995 mm 1,195 mm 315 mm 695 mm 795 mm 895 mm 995 mm 1,195 mm
Item No.: 1003.0700 1003.0800 1003.0900 1003.1000 1003.1200 1004.0300 1004.0700 1004.0800 1004.0900 1004.1000 1004.1200
EAN No.*: 3139 3146 3153 3160 3177 3238 3184 3191 3207 3214 3221
Drain unit [wall]
Against wall for two-walled shower cubicle, open/glass on the left side.
Against wall for shower cubicle/bath with distance to walls.
*570769200xxxx
(L)(R)
150
57
(C)
80
(H)
15080
(R)
(H)
(C)
(L)
57
08
2001
!
Drain unit [wall]
Corner 2001
Drain unit for corner placement.
The drain unit has two wall flanges and two floor flanges.
Measures only 170 x 170 mm in finished floor.
Usage: Corner drain
Wall flange Two rear walls
Module length: 200 mm
Length (L): 377/267 mm
Centre (C): -
Height (H): -
Frame (R): 270/193mm
Item No.: 2011.0200
EAN No.*: 6659
Against wall for corner cubicle.
IntroductionCorner model placed against wall – with rear flange.unidrain® corner drain unit distinguishes itself by its compact size and large capacity.
*570769200xxxx
SpecificationMaterial: Stainless steel (AISI 304)Surface: PickledDimension: 1.5 mmMembrane: Lubrication membrane or sheet membranes.Floor construction: Concrete/woodFloor covering: Tile/tile bricks
Shown with ClassicLine frame/grate.
267267
37755
63
197
09
Mounting Set [wall], Mounting Element [wall]
*570769200xxxx
Mounting Set 22 mm Mounting ElementLine [wall]
300-1,000 mmLine [wall]1,200 mm
Corner [wall]200 mm
Line [floor]300-900 mm
Line [wall] 100 mm
Line [wall] 135 mm
Ensures correct placement and fitting of drain unit in wooden floor joist construction. Its customised to various model lengths by cutting the front and back profile.
The set consists of a front, back and side profile(s) that are mounted into wooden joists using screws. The drain unit is inserted into the profile and “clicked” in place.
Also available as Mounting Set (38 mm).
See full product line from 300-1,200 mm at www.unidrain®.com
Letter mounting with pre- fabricated polystyrene sheets.
Can be cut to size and adapted to fit all model lengths.
Usage: Line drain Line drain Corner drain Line drain Line drain Line drain
Module length: 300-1,200 mm 1,200 mm 200 mm 300-900 mm H 100 mm H 135 mm
Materials: Stainless steel/wood Stainless steel/wood Stainless steel/wood Stainless steel/wood EPS EPS
Surface: Pickled/wood Pickled/wood Pickled/wood Pickled/wood Fibreglass-reinforced mortar surface
Fibreglass-reinforced mortar surface
Fits: (1001.0300)(1002.0300)(1003.0300)(1004.0300)
1001.12001002.12001003.1200
1004.01200
2001.0200 3002.0700-09003004.0300-0900 All line drain units [wall] All line drain units [wall]
Item No.: 1804.1022 1804.1022 2801.0222 3804.0922 1860.0100 1860.0135
EAN No.*: 3597 3603 4136 6574 6406 6413
unidrain® shown with ClassicLine frame/grate and Mounting Set 22 mm. unidrain® shown with ClassicLine frame/grate and Mounting Element 135 mm.
10
!
SpecificationsMaterial: Plastic (PP)Gasket: EPDM
Total construction height (excl. frame/grate) = Height of the outlet unit + (H).(H) = Distance from the top edge of the outlet unit to the top side of the floor flange/underside of the tiles.(See the measurement specifications for the selected drain unit).
Outlet units [line]
IntroductionOutlet units for line solution.Outlet dimension: Ø 32 or 50 mm.With/without water trap with horizontal or side outlet.
*570769200xxxx
Line 1301.0032 Line 1301.0050 Line 1406.0050*
Provides the option of built-in inst. at very low installation heights.
With horizontal Ø 30 mm outlet and can be turned 180˚ if a backward facing outlet is required.
Without water trap.
Provides the option of built-in inst. at very low installation heights.
With horizontal Ø 50 mm outlet and can be turned 180˚ if a backward facing outlet is required.
Without water trap.
Provides the option of built-in inst. at very low installation heights.
With horizontal Ø 50 mm outlet and can be turned 180˚ if a backward facing outlet is required.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
Usage: Line drain Line drain Line drain
Outlet dimensions: Ø 32 mm Ø 50 mm Ø 50 mm
Outlet direction: Horizontal Horizontal Horizontal
Capacity: > 0,4 l/s > 0,6 l/s > 0,6 l/s
Water trap: Without Without With
Side inlet: Without Without Without
Fits units: Armatur 1001, 1002, 1003, 1004, 1100, 3002, 3004 Armatur 1001, 1002, 1003, 1004, 1100, 3002, 3004 Armatur 1001, 1002, 1003, 1004, 1100, 3002, 3004
Item No.: 1301.0032 1301.0050 1406.0050
EAN No.*: 2521 6062 6055
*Only 25 mm water seal. Does not comply with EN 1253 - is not VA certified.
122
77
15080
(H)
13
Ø 32
220
64 Ø 50
220
132
77 37
15080
(H)13
62
45
Ø 50
220
132
77 37
15080
(H)13
62
4545
48
11
Outlet units [line]
Line 1407.0050* Line 1401.0050 Line 1405.0050
Provides the option of built-in inst. at very low installation heights.
With horizontal Ø 50 mm outlet and can be turned 180˚ if a backward facing outlet is required.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
With horizontal Ø 50 mm outlet and can be turned 180˚ if a backward facing outlet is required.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
With horizontal Ø 50 mm outlet and can be turned 180˚ if a backward facing outlet is required.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
Usage: Line drain Line drain Line drain
Outlet dimensions: Ø 50 mm Ø 50 mm Ø 50 mm
Outlet direction: Horizontal Horizontal Horizontal
Capacity: > 0.6 l/s > 0.8 l/s > 0.8 l/s
Water trap: With With With
Side inlet: Without Without Without
Fits units: 1001, 1002, 1003, 1004, 1100, 3002, 3004 1001, 1002, 1003, 1004, 1100, 3002, 3004 1001, 1002, 1003, 1004, 1100, 3002, 3004
Item No.: 1407.0050 1401.0050 1405.0050
EAN No.*: 6703 1463 2972
*570769200xxxx *Only 25 mm water seal. Does not comply with EN 1253 - is not VA certified.
Ø 50
220
104
149
Ø 50
220
274
Ø 50
73
104
53
15080
(H)
13
15080
(H)
1377 77
Ø 50
220
132
37
15080
(H)13
62
45
50
45 45
12
!
Line 1401.0075 Line 1402.0075
With horizontal Ø 75 mm outlet and can be turned 180˚ if a backward facing outlet is required.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
With vertical Ø 75 mm outlet and can be turned 180˚ if a backward facing outlet is required.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
Usage: Line drain Line drain
Outlet dimensions: Ø 75 mm Ø 75 mm
Outlet direction: Horizontal Vertical
Capacity: > 0.8 l/s > 0.8 l/s
Water trap: With With
Side inlet: Without Without
Fits units: 1001, 1002, 1003, 1004, 1100, 3002, 3004 1001, 1002, 1003, 1004, 1100, 3002, 3004
Item No.: 1401.0075 1402.0075
EAN No.*: 1470 2484
SpecificationsMaterial: Plastic (PP)Gasket: EPDM
*570769200xxxx
Total construction height (excl. frame/grate) = Height of the outlet unit + (H).(H) = Distance from the top edge of the outlet unit to the top side of the floor flange/underside of the tiles.(See the measurement specifications for the selected drain unit).
Outlet units [line]
IntroductionOutlet units for line solution.Outlet dimension: Ø 75 mm.With water trap with horizontal or vertical outlet and with/without side outlet.
15080
(H)
13
15080
(H)
13
Ø 75
220
104
149
124
85
220
189
Ø 75
68
77 77
45
63
65
45
13
Line 1403.0075 Line 1404.0075
With horizontal Ø 75 mm outlet, two Ø 40 mm side inlets and can be turned 180˚ if a backward facing outlet is required.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
With vertical Ø 75 mm outlet, two Ø 40 mm side inlets and can be turned 180˚ if a backward facing outlet is required.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
Usage: Line drain Line drain
Outlet dimensions: Ø 75 mm Ø 75 mm
Outlet direction: Horizontal Vertical
Capacity: > 1.4 l/s > 1.4 l/s
Water trap: With With
Side inlet: 2 Ø 40 mm 2 Ø 40 mm
Fits units: 1001, 1002, 1003, 1004, 1100, 3002, 3004 1001, 1002, 1003, 1004, 1100, 3002, 3004
Item No.: 1403.0075 1404.0075
EAN No.*: 2507 2514
*570769200xxxx
Outlet units [line]
15080
(H)
13
15080
(H)
13
Ø 40
198
50
Ø 75
77
Ø 40
65
Ø 40
196
13665
Ø 75
Ø 4050
261
68
34
77
34
54
155
45 45
54
220 220
14
SpecificationsMaterial: Plastic (PP)Gasket: EPDM
Diagonal measurements from inside corner to front
Diagonal measurements from inside corner to front
Outlet units [corner]
IntroductionOutlet units for corner solution.Outlet dimension: Ø 32, 50 or 75 mm.With/without water trap with horizontal or vertical outlet.
Corner 2311.0032 Corner 2311.0050
Allows for low headroom.
With horizontal outlet Ø 32 mm.
Can be rotated, which may facilitate piping
Without water trap.
Allows for low headroom.
With horizontal outlet Ø 50 mm.
Can be rotated, which may facilitate piping
Without water trap.
Usage: Corner drain Corner drain
Outlet dimensions: Ø 32 mm Ø 50 mm
Outlet direction: Horizontal Horizontal
Capacity: 0,5 l/s 0,8 l/s
Water trap: Without Without
Side inlet: Without Without
Fits units: Drain unit 2011.0200 Drain unit 2011.0200
Item No.: 2311.0032 2311.0050
EAN No.*: 6581 6598
*570769200xxxx
15
Outlet units [corner]
Corner 2411.0050 Corner 2411.0075 Corner 2412.0075
With horizontal outlet Ø 50 mm.
Can be rotated, which may facilitate piping
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
With horizontal outlet Ø 75 mm.
Can be rotated, which may facilitate piping
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
With horizontal outlet Ø 75 mm.
Can be rotated, which may facili-tate piping
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
Usage: Corner drain Corner drain Corner drain
Outlet dimensions: Ø 50 mm Ø 75 mm Ø 75 mm
Outlet direction: Horizontal Horizontal Vertical
Capacity: 0,8 l/s 0,9 l/s 1,0 l/s
Water trap: With With With
Side inlet: Without Without Without
Fits units: Drain unit 2011.0200 Drain unit 2011.0200 Drain unit 2011.0200
Item No.: 2411.0050 2411.0075 2412.0075
EAN No.*: 6604 6611 6628
*570769200xxxx
16
SpecificationsMaterial: Plastic (PP)Gasket: EPDM
Diagonal measurements from inside corner to front
Diagonal measurements from inside corner to front
Outlet units [corner]
IntroductionOutlet unit for corner solution.Outlet dimension: 75 mm.With water trap with horizontal or vertical outlet and with side inlet.
Corner 2413.0075 Corner 2414.0075
With vertical Ø 75 mm outlet and a Ø 40 mm side inlet.
Can be rotated, which may facilitate piping.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
With vertical Ø 75 mm outlet and a Ø 40 mm side inlet.
Can be rotated, which may facilitate piping.
With built-in water trap with a high, self-rinsing effect.
The water trap can be removed, separated and cleaned.
Usage: Corner drain Corner drain
Outlet dimensions: Ø 75 mm Ø 75 mm
Outlet direction: Horizontal Vertical
Capacity: 1,4 l/s 1,5 l/s
Water trap: With With
Side inlet: With With
Fits units: Drain unit 2011.0200 Drain unit 2011.0200
Item No.: 2413.0075 2414.0075
EAN No.*: 6635 6642
*570769200xxxx
17
Outlet units [corner]
Corner 2415.0032* Corner 2415.0050*
Allows for low headroom.
With horizontal outlet Ø 32 mm.
Can be rotated, which may facilitate piping
Have recordable water trap with automatic odor barrier (AOS).
Allows for low headroom.
With horizontal outlet Ø 50 mm.
Can be rotated, which may facilitate piping
Have recordable water trap with automatic odor barrier (AOS).
Usage: Corner drain Corner drain
Outlet dimensions: Ø 32 mm Ø 50 mm
Outlet direction: Horizontal Horizontal
Capacity: 0,4 l/s 0,5 l/s
Water trap: With With
Side inlet: Without Without
Fits units: Drain unit 2011.0200 Drain unit 2011.0200
Item No.: 2415.0032 2415.0050
EAN No.*: 6789 6796
IntroductionOutlet unit for corner solution.Outlet dimension: Ø 32, 50 mm.With water trap with horizontal side inlet.
SpecificationsMaterial: Plastic (PP)Gasket: EPDM
Diagonal measurements from inside corner to front Diagonal measurements from inside corner to front
*570769200xxxx *Only 20 mm water seal. Does not comply with EN 1253 - is not VA certified.
*Only 20 mm water seal. Does not comply with EN 1253 - is not VA certified.
18
*570769200xxxx
Accessories [line]
*570769200xxxx
Stainer Water trap Riser piece1810.0010 1820.0010 1820.0020 1820.0030 35 mm 55 mm
It helps to ensure that the water trap doesn’t become clogged.
1820.0010: Meets capacity and self-purification according to EN 1253, which is a common European standard for floor drains. Its easy to clean, it can easily be taken up of the outlet unit and disassembled without tools.
1820.0020: Suitable for low outlet 1301.0050/1406.0050/1407.0050. Does not comply with EN 1253 - is not VA approved. Only 25 mm shut height.
1820.0030: Has automatic odor barrier to avoid odors if the water trap dries out (AOS). Suitable for low outlet 1301.0050/1406.0050/1407.0050. Does not comply with EN 1253 - is not VA approved. Only 25 mm shut height.
Lowers outlet unit/side inlets and allow for greater reduction of side inlet.
Placed between the drain unit outlet and the outlet unit.
Usage: Line drain Line drain Line drain Line drain Line drain Line drain
Model: 1810 1820 1820 1820 H 35 mm H 55 mm
Material: Stainless steel (AISI 304) Plastic (PP) Plastic (PP) Plastic (PP) Plastic (PP) Plastic (PP)
Surface: Brushed - - - - -
Gasket - TPE TPE TPE EPDM EPDM
Item No.: 1810.0010 1820.0010 1820.0020 1820.0030 1830.0035 1830.0055
EAN No.*: 2446 2439 6079 6710 3436 3443
19
Accessories [corner]Accessories [line]
*570769200xxxx
Stainer Hook Water trap Riser piece2811.0010 1840.0000 2821.0020 2821.0030 2830.0095
It helps to ensure that the water trap doesn’t become clogged.
Hook to lift the water trap out of the outlet unit.
Can be used on Line - and Corner Models.
2821.0020:Meets capacity and self-purification according to EN 1253, which is a common European standard for floor drains. Its easy to clean, it can easily be taken up of the outlet unit and disassembled without tools.
2821.0030:Has automatic odor barrier to avoid odors if the water trap dries out (AOS). Suitable for low outlet 2311.0032/2311.0050/2415.0032/2415.0050.Does not comply with EN 1253 - is not VA approved. Only 20 mm shut height.
Lowers outlet unit/side inlets
Placed between the drain unit outlet and the outlet unit.
Ø 40 mm. side inlet can optionally be opened.
Usage: Corner drain Corner/Line Corner drain Corner drain Corner drain
Model: 2811 1840 2821 2821 H 95 mm
Material: Stainless steel Plastic/steel Plastic (PP) Plastic (PP) Plastic (PP)
Surface: Brushed - - - -
Gasket - - TPE TPE EPDM
Item No.: 2811.0010 1840.0000 2821.0020 2821.0030 2830.0095
EAN No.*: 2675 6802 6673 6680 6697
Stainer Water trap Riser piece1810.0010 1820.0010 1820.0020 1820.0030 35 mm 55 mm
It helps to ensure that the water trap doesn’t become clogged.
1820.0010: Meets capacity and self-purification according to EN 1253, which is a common European standard for floor drains. Its easy to clean, it can easily be taken up of the outlet unit and disassembled without tools.
1820.0020: Suitable for low outlet 1301.0050/1406.0050/1407.0050. Does not comply with EN 1253 - is not VA approved. Only 25 mm shut height.
1820.0030: Has automatic odor barrier to avoid odors if the water trap dries out (AOS). Suitable for low outlet 1301.0050/1406.0050/1407.0050. Does not comply with EN 1253 - is not VA approved. Only 25 mm shut height.
Lowers outlet unit/side inlets and allow for greater reduction of side inlet.
Placed between the drain unit outlet and the outlet unit.
Usage: Line drain Line drain Line drain Line drain Line drain Line drain
Model: 1810 1820 1820 1820 H 35 mm H 55 mm
Material: Stainless steel (AISI 304) Plastic (PP) Plastic (PP) Plastic (PP) Plastic (PP) Plastic (PP)
Surface: Brushed - - - - -
Gasket - TPE TPE TPE EPDM EPDM
Item No.: 1810.0010 1820.0010 1820.0020 1820.0030 1830.0035 1830.0055
EAN No.*: 2446 2439 6079 6710 3436 3443
20
! !
Line 1500 Corner 2500
Available in 8, 10 and 12 mm heights, depending on the thickness of the floor tile.
Inserts ensures accurate fitting inside the unit. A countersunk bearing ensures that the grate fits perfectly into the frame.
The frame is mandatory and has a double function – to support the grate and provide a pefectly flush finish with the tile/tile brick.
Usage: Line drain Corner drain
Module length: 300 mm 700 mm 800 mm 900 mm 1,000 mm 1,200 mm 200 mm
Length (L): 315 mm 695 mm 795 mm 895 mm 995 mm 1,195 mm 270/193 mm
Fits units: 1004 1001, 1002, 1003, 1004, 1100 2001
8 mm (H)
Item No.: 1500.0308 1500.0708 1500.0808 1500.0908 1500.1008 1500.1208 2501.0208
EAN No.*: 3245 3276 3306 3337 3368 3399 2606
10 mm (H)
Item No.: 1500.0310 1500.0710 1500.0810 1500.0910 1500.1010 1500.1210 2501.0210
EAN No.*: 3252 3283 3313 3344 3375 3405 2613
12 mm (H)
Item No.: 1500.0312 1500.0712 1500.0812 1500.0912 1500.1012 1500.1212 2501.0212
EAN No.*: 3269 3290 3320 3351 3382 3412 2620
ClassicLine frame [wall]
SpecificationsMaterial: Stainless steel (AISI 403)Surface: BrushedInsert: Synthetic material
Frame height (H) = tile thickness + approx. 2 mm to tile mortar and membrane. Frame width against wall = 19 mm (incl. 2 mm air gap).Frame width against floor surface = 10 mm.
Frame height (H) = tile thickness + approx. 2 mm to tile mortar and membrane. Frame width against wall = 18 mm (incl. 2 mm air gap).Frame width against floor surface = 10 mm.
*570769200xxxx
IntroductionChoose from frames for line or corner solution in 8, 10 and 12 mm heights for unit against wall.The frame is mandatory.For frames for line units over H 12 mm, we refer to HighLine (see page 24).
19
19
80
(H)
(L)10
(L2) (L2)
(L1)(H)
18
10
18
21
Classic
Column
Inca
Square
Stripe
Classic
Column
ClassicLine grate
SpecificationsMaterial: Stainless steel (AISI 403)Surface: BrushedDimension: 3 mm solid
Linie 1600 Corner 2600
Choose from five designs for line solution: Classic, Column, Inca, Square and Stripe.
Choose from two designs for corner solution: Classic and Column.
The grate is placed on a countersunk bearing inside the frame to ensure a precise fit.
Can only be used with frame.
Usage: Line drain Corner drain
Module length: 300 mm 700 mm 800 mm 900 mm 1,000 mm 1,200 mm 200 mm
Length (L): 280 mm 660 mm 760 mm 860 mm 960 mm 1,160 mm 191 mm
ClassicItem No.: 1601.0300 1601.0700 1601.0800 1601.0900 1601.1000 1601.1200 2601.0200
EAN No.*: 2231 1098 1104 1111 2255 2279 2651
ColumnItem No.: 1602.0300 1602.0700 1602.0800 1602.0900 1602.1000 1602.1200 2602.0200
EAN No.*: 2286 1128 1135 1142 2309 2323 2668
IncaItem No.: 1603.0300 1603.0700 1603.0800 1603.0900 1603.1000 1603.1200 -
EAN No.*: 2330 1159 1166 1173 2354 2378 -
SquareItem No.: 1604.0300 1604.0700 1604.0800 1604.0900 1604.1000 1604.1200 -
EAN No.*: 2385 1180 1197 1203 2408 2422 -
StripeItem No.: 1605.0300 1605.0700 1605.0800 1605.0900 1605.1000 1605.1200 -
EAN No.*: 2897 2910 2231 2934 2941 2965 -
*570769200xxxx
IntroductionChoose from five grate designs for line solution and two grate designs for corner solution.
Cross-section of outlet unit with frame and grate. * Heigth of frame.
137
191
51
(L)
(H)*
22
Classic
Column
Classic
Column
ClassicLine Soap shelf
SpecificationsMaterial: Stainless steel (AISI 304)Surface: Brushed Line 1850 Corner 2850
Soap shelf incl. grate for corner placement.
Designed for insertion in tile joint or screw mounting into existing shower cubicle.
Usage: Wall Wall
Module length: 300 mm 200 mm
Length (L): 315 mm 288/204 mm
ClassicItem No.: 1850.0301 2850.0201
EAN No.*: 6369 6383
ColumnItem No.: 1850.0302 2850.0202
EAN No.*: 6379 6390
*570769200xxxx
IntroductionChoose line - (300 mm) or corner solution.
204
288
315
86
23
!For more inspiring images,
log into www.unidrain.com
ClassicLine Soap shelf with Column grate
ClassicLine with Column grate
24
!
HighLine frame [wall]
SpecificationsMaterial: Stainless steel (AISI 304)Surface: BrushedInsert: Synthetic material
Line 1910
Available in 10, 12, 15 and 25 mm heights, depending on the thickness of the floor tile.
Exclusive, sharp frame design with 4 mm solid stainless steel surface.
Inserts ensures accurate fitting inside the unit.
The frame is optional but provides a perfectly flush finish with the tile/tile brick.
Usage: Line drain
Module length: 300 mm 700 mm 800 mm 900 mm 1,000 mm 1,200 mm
Length (L): 315 mm 695 mm 795 mm 895 mm 995 mm 1,195 mm
Fits units: 1004 1001, 1002, 1003, 1004, 1100
10 mm (H)
Item No.: 1910.0310 1910.0710 1910.0810 1910.0910 1910.1010 1910.1210
EAN No.*: 4242 4259 4266 4273 4280 4297
12 mm (H)
Item No.: 1910.0312 1910.0712 1910.0812 1910.0912 1910.1012 1910.1212
EAN No.*: 4303 4310 4327 4334 4341 4358
15 mm (H)
Item No.: 1910.0315 1910.0715 1910.0815 1910.0915 1910.1015 1910.1215
EAN No.*: 4365 4372 4389 4396 4402 4419
25 mm (H)
Item No.: 1910.0325 1910.0725 1910.0825 1910.0925 1910.1025 1910.1225
EAN No.*: 4426 4433 4440 4457 4464 4471
Frame height (H) = tile thickness + approx. 2 mm to tile mortar and membrane.Frame width against flange (side wall/back wall) = 27/19 mm (incl. 2 mm air gap).Frame width against floor surface = 8 mm.Without use of frame: air gap between panel and floor tile = 6 mm.
*570769200xxxx
IntroductionChoose from frames for line solu-tion in 10, 12, 15 and 25 mm heights for unit against wall.The HighLine frame is designed to match the panels' minimalistic, stringent lines.The frame is optional.
19
76
(H)
27
8(L)
25
*
*
*
HighLine panel
SpecificationsMaterial: Stainless steel/frosted glas/Corian®
Surface: Brushed/glas/Corian®
Heightener set: Plastic (PE)
Other Corian® colours are available on request (a minimum of 10 pcs.).
Line 1920
Choose between solid brushed stainless steel, frosted glas or Corian® colours.
The set is a complete solution comprising a panel, rail and screws. The set must be assembled before mounting. The set also includes a heightening set for height adjustment and a 6 mm tile template, which is used as a distance piece when mounting without a frame.
The Panel solution is placed directly inside the unit, where the shape of the rail ensures a precise fit.
Can be used with or without a frame.
Usage: Line drain
Module length: 300 mm 700 mm 800 mm 900 mm 1,000 mm 1,200 mm
Length (L): 253 mm 633 mm 733 mm 833 mm 933 mm 1,133 mm
Stainlesssteel
brushed
Item No.: 1920.0300 1920.0700 1920.0800 1920.0900 1920.1000 1920.1200
EAN No.*: 4488 4495 4501 4518 4525 4532
Corian®
Nocturne
Item No.: 1922.0300 1922.0700 1922.0800 1922.0900 1922.1000 1922.1200
EAN No.*: 4600 4617 4624 4631 4648 4655
Corian®
Hot
Item No.: 1926.0300 1926.0700 1926.0800 1926.0900 1926.1000 1926.1200
EAN No.*: 4846 4853 4860 4877 4884 4891
GlasWhite
Item No.: 1930.0300 1930.0700 1930.0800 1930.0900 1930.1000 1930.1200
EAN No.*: 6819 6826 6833 6840 6857 6864
GlasBlack
Item No.: 1931.0300 1931.0700 1931.0800 1931.0900 1931.1000 1931.1200
EAN No.*: 6871 6888 6895 6901 6918 6925
Heightener setH: 1, 2, 5, 15 mmwhere there is a need for height adjustment > H 10 mm
*570769200xxxx
Cross-section of outlet unit with frame/ with Panel in brushed stainless steel. * Heigth of frame.
Cross-section of outlet unit with frame/ with Panel in Corian®. * Heigth of frame.
Cross-section of outlet unit with frame/ with Panel in frosted glas. * Heigth of frame.
IntroductionChoose between Panel in stainless steel, frosted glas or Corian® colours for your line solution.
Without frame With frame
(L)
37
26
*
*
*
HighLine Cassette
SpecificationsMaterial: Stainless steel (AISI 304)Surface: Brushed Line 1940
The set consists of a cassette, rail and screws. The set must be assembled before mounting. Available in 10, 12, 15 and 25 mm heights, (depending on the thickness of the floor tile). The set also includes a 6 mm tile template, which is used as a distance piece when mounting without a frame.
Heightening set (H: 1, 2, 5 and 15 mm) can be ordered for further height adjustment.
To complete the solution the set comes with its own material/filler.
The Cassette solution is placed directly inside the unit, where the shape of the rail ensures a precise fit.
Can be used with or without a frame.
Usage: Line drain
Module length: 300 mm 700 mm 800 mm 900 mm 1,000 mm 1,200 mm
Length (L): 253 mm 633 mm 733 mm 833 mm 933 mm 1,133 mm
10 mm (H)
Item No.: 1940.0310 1940.0710 1940.0810 1940.0910 1940.1010 1940.1210
EAN No.*: 5089 5096 5102 5119 5126 5133
12 mm (H)
Item No.: 1940.0312 1940.0712 1940.0812 1940.0912 1940.1012 1940.1212
EAN No.*: 5140 5157 5164 5171 5188 5195
15 mm (H)
Item No.: 1940.0315 1940.0715 1940.0815 1940.0915 1940.1015 1940.215
EAN No.*: 5201 5218 5225 5232 5249 5256
25 mm (H)
Item No.: 1940.0325 1940.0725 1940.0825 1940.0925 1940.1025 1940.1225
EAN No.*: 5263 5270 5287 5294 5300 5317
*570769200xxxx
Cross-section of outlet unit with frame/ with Cassette (prior to mounting of material). * Heigth of frame.
Cross-section of outlet unit without frame/with Cassette (prior to mounting of material). * Heigth of tile.
IntroductionChoose from Cassette solution in heights of 10, 12, 15 and 25 mm for line solution. Comes with own, accompanying material such as matching floor tile, terrazzo etc.onto which it is mounted.
Without frame With frame
(L)
37
27
*
*
HighLine Custom
SpecificationsMaterial: Stainless steel (AISI 304)Surface: BrushedHeightener set: Plastic (PE)
Line 1950
The set consists of a base, rail and screws. The set must be assembled before mounting. The set also includes a heightening set for height adjustment and a 6 mm tile template, which is used as a distance piece when mounting without a frame.
To complete the solution the set comes with its own tile.
The custom solution is placed directly inside the unit, where the shape of the rail ensures a precise fit.
Can be used with or without a frame.
Usage: Line drain
Module length: 300 mm 700 mm 800 mm 900 mm 1,000 mm 1,200 mm
Length (L): 253 mm 632 mm 733 mm 833 mm 933 mm 1,133 mm
Item No.: 1950.0300 1950.0700 1950.0800 1950.0900 1950.1000 1950.1200
EAN No.*: 5324 5331 5348 5355 5362 5379
Heightener setH: 1, 2, 5, 15 mmwhere there is a need for height adjustment > H 10 mm
*570769200xxxx
Cross-section of outlet unit with frame/ with Custom (with mounting of own material). * Heigth of frame.
Cross-section of outlet unit without frame/with Custom (with mounting of own material). * Heigth of tile.
IntroductionChoose Custom solution that can be supplemented with own material such as matching floor tile, which is mounted on top.For line solution.
Without frame With frame
(L)
37
28
**
193
193
6
270
16
6
HighLine panel [corner]
Cross-section of outlet unit with frame/ with Panel in brushed stainless steel. * Heigth of frame.
Cross-section of outlet unit with frame/ with Panel in brushed stainless steel. * Heigth of frame.
SpecificationsMaterial: Stainless steel (AISI 304)Surface: BrushedHeightener set: Plastic
IntroductionFrame and Panel in Brushed Stainless steel
HighLine Corner
Available in heights of 10, 12, 15, 25 mm, depending on the thickness of floor tile.
Exclusive sharp frame design with a surface of 4 mm solid stainless steel.
The frame is optional, but gives a fine finish on tile.
Corner drain
Frame Panel
200 mm 200 mm 200 mm 200 mm 200 mm 200 mm
10 mm 12 mm 15 mm 25 mm Fitting with frame Fitting without frame
Stainlesssteel
brushed
Item No.: 2910.0210 2910.0212 2910.0215 2910.0225 2920.0200 2920.0201
EAN No.: 6727 6734 6741 6758 6765 6772
Heightener setH: 6, 8, 11, 21 mm.Mounted under the panel.
*570769200xxxx
Without frame With frame
30
C
A
B
1
1
2
2
3
3
4
5
5
5
67
8
9
(H)
(H)
(H)
Module 1100 [wall]
1. Module drain unit2. Flex Flange, vertical3. Flex Flange, horizontal4. Flex Flange between
Module 1100 enables you to construct a longer module outlet for larger bathrooms and consists of components which are welded together to achieve the desired length and flange configuration. Outlet units, frames and grates are the same as those in the unidrain®
line system [wall], and Module 1100 meets unidrain®'s stringent drain and building technology standards. The module outlet unit is available in 700, 800, 900, 1,000 and 1,200 mm and has a folded front edge, which provides greater mounting stability.The module can be supplemented with Flex Frames – such as end piece [A], middle piece [B] or corner piece [C] – and the module unit can be adapted within distances of 10-120 mm (with a jump of 10 mm). An invisible Flex Flange is placed under the visible Flex Frame.Module 1100 mounted freely into floor (without back flange) is available on request.Contact unidrain® for more information about Module 1100 – or for a quotation in connection with a specific solution.
Flexible components
Flexibility for large bathrooms
3,50-124 mm
3,50-124 mm
60 mm
60 mm
10-120 mm
10-120 mm
10-120 mm
10,50-120,50 mm
5. Flex Frame [A]+[B]6. Flex Flange inward corner7. Flex Frame inward corner [C]8. Flex Flange outward corner9. Flex Frame outward corner
Note1,2,3,4,6,8 - Welded together prior to delivery.5,7,9 - Flex Frame are stocked.
700-1200 mm
700-1200 mm
3,50-124 mm
3,50-124 mm
60 mm
60 mm
10-120 mm
10-120 mm
10-120 mm
10,50-120,50 mm
31
1100
Module 1100 [wall]
Against wall, offering flexibility and infinite possibilities.
SpecificationsMaterial: Stainless steel (AISI 304)Surface: BrushedDimension: 1.5 mmMembrane: Lubrication membrane or sheet membranes Floor construction: Concrete/woodFloor covering: Tile/tile bricks
Examples of solutions
A Module [1], Flex Flanges vertical [2] left- and right-hand, matching Flex Frames [5].
A Module [1], Flex Flanges vertical [3] left- and right-hand, matching Flex Frames [5].
Two Modules [1], Flex Flanges vertical [2] left- and right-hand.
Two Modules [1], Flex Flange between [4], Flex Flanges vertical [3] left- and right-hand, matching Flex Frames [5].
Three Modules [1] , Flex Flange vertical [2] left-hand, Flex Flange inward corner [6], matching Flex Frames [5] + [7].
*570769200xxxx
Flex Frame [5], [7], [9]
Usage: Line drain Line drain
Model: ClassicLine HighLine
Height (H): 8 mm 10 mm 12 mm H 10/12/15/25 mm
Module length: Item No.: EAN No.*: Item No.: EAN No.*: Item No.: EAN No.*: Item No.: EAN No.*:
[5]
10 mm 1510.0108 3771 1510.0110 3788 1510.0112 3795 1911.0110 6420
20 mm 1510.0208 3801 1510.0210 3818 1510.0212 3825 1911.0210 6437
30 mm 1510.0308 3832 1510.0310 3849 1510.0312 3856 1911.0310 6444
40 mm 1510.0408 3863 1510.0410 3870 1510.0412 3887 1911.0410 6451
50 mm 1510.0508 3894 1510.0510 3900 1510.0512 3917 1911.0510 6468
60 mm 1510.0608 3924 1510.0610 3931 1510.0612 3948 1911.0610 6475
70 mm 1510.0708 3955 1510.0710 3962 1510.0712 3979 1911.0710 6482
80 mm 1510.0808 3986 1510.0810 3993 1510.0812 4006 1911.0810 6499
90 mm 1510.0908 4013 1510.0910 4020 1510.0912 4037 1911.0910 6505
100 mm 1510.1008 4044 1510.1010 4051 1510.1012 4068 1911.1010 6512
110 mm 1510.1108 4075 1510.1110 4082 1510.1112 4099 1911.1110 6529
120 mm 1510.1208 4105 1510.1210 4112 1510.1212 4129 1911.1210 6536
[7] Corner 1530.1208 6963 1530.1210 6970 1530.1212 6987 1913.1210 6550
[9] Corner 1520.0808 6932 1520.0810 6949 1520.0812 6956 1912.0810 6543
33
30043002 3002
!Total construction height (excl. frame/
grate) = height of the outlet unit + (H).(H) = Distance from the top edge of outlet unit to the top of floor flange/underside of tile.Shown with ClassicLine frame/grate.
Line 3002 Line 3004
Outlet unit freely mounted into floor against a side wall (left or right).
For shower cubicle opening etc. with a fixed wall.
The outlet unit has a wall flange and three floor flanges.
Incl. 4 height-adjustable feet (120-220 mm).
Outlet unit freely mounted into floor without side or back walls
For shower cubicle opening etc. without fixed side walls.
The outlet unit has no wall flanges and four floor flanges.
Incl. 4 height-adjustable feet (120-220 mm).
Usage: Line drain Line drain
Wall flanges: Left or right (can be turned 180˚ according to requirements) None
Module length: 700 mm 900 mm 300 mm 700 mm 900 mm
Length (L): 757 mm 957 mm 432 mm 812 mm 1,012 mm
Centre (C): 351 mm 451 mm 206 mm 396 mm 496 mm
Height (H): 17 mm 19 mm 12 mm 17 mm 19 mm
Frame (R): 695 mm 895 mm 315 mm 695 mm 895 mm
Item No.: 3002.0700 3002.0900 3004.0300 3004.0700 3004.0900
EAN No.*: 6109 6116 6123 6130 6147
SpecificationsMaterial: Stainless steel (AISI 304)Surface: PickledDimension: 1.5 mmMembrane: Lubrication membrane or sheet membranes Floor construction: Concrete/woodFloor covering: Tile/tile bricks
Drain unit [floor]
*570769200xxxx
IntroductionMounted into the floor – without back flange.Choose from 2 line fittings, depending on placement. Sides without wall flanges must comply with rules regarding min. distance to wall.For line units placed against backwall, we refer to series 1000 (see pages 6 and 7).
Freely mounted into floor without walls.
Freely mounted into floor with a wall on left.
Freely mounted into floor with a wall on right.
(L)(R)
208
(C)
71
(H)
(L)(R)
208
(C)
71
(H)
57
34
!
SpecificationsMaterial: Stainless steel (AISI 304)Surface: BrushedInsert: Synthetic material
Frame height (H) = tile thickness + approx. 2 mm to tile mortar and membrane. Frame width against wall = 19 mm (incl. 2 mm air gap).Frame width against floor surface = 10 mm.
Line 3500
Available in 8, 10 and 12 mm heights, depending on the thickness of the floor tile.
Inserts ensures accurate fitting inside the unit.
ClassicLine grate must be selected (see page 21)
The frame is mandatory.
Usage: Line drain
Module length: 300 mm 700 mm 900 mm
Length (L): 315 mm 695 mm 895 mm
Fits units: 3004 3002, 3004
8 mm (H)
Item No.: 3500.0308 3500.0708 3500.0908
EAN No.*: 6154 6185 6215
10 mm (H)
Item No.: 3500.0310 3500.0710 3500.0910
EAN No.*: 6161 6192 6222
12 mm (H)
Item No.: 3500.0312 3500.0712 3500.0912
EAN No.*: 6178 6208 6239
ClassicLine frame [floor]
*570769200xxxx
IntroductionChoose from line solution frames in 8, 10 or 12 mm heights for freely mounted floor unit.The frame is mandatory.For frames over H 12 mm, we refer to HighLine frames (see page 35).Select ClassicLine grate design (see page 21).
19
10
71
(H)
(L)10
35
!
SpecificationsMaterial: Stainless steel (AISI 304)Surface: BrushedInsert: Synthetic material
Line 3910
Available in 10, 12, 15 and 25 mm heights, depending on the thickness of the floor tile.
Inserts ensures accurate fitting inside the unit.
HighLine Panel, Cassette or Custom must be selected (see pages 25 to 27).
The frame is optional.
Usage: Line drain
Module length: 300 mm 700 mm 900 mm
Length (L): 315 mm 695 mm 895 mm
Fits units: 3004 3002, 3004
10 mm (H)
Item No.: 3910.0310 3910.0710 3910.0910
EAN No.*: 6246 6284 6321
12 mm (H)
Item No.: 3910.0312 3910.0712 3910.0912
EAN No.*: 6253 6292 6338
15 mm (H)
Item No.: 3910.0315 3910.0715 3910.0915
EAN No.*: 6260 6307 6345
25 mm (H)
Item No.: 3910.0325 3910.0725 3910.0925
EAN No.*: 6277 6314 6352
Frame height (H) = tile thickness + approx. 2 mm to tile mortar and membrane. Frame width against wall = 27 mm (incl. 2 mm air gap).Frame width against floor surface = 8 mm.Without use of frame: air gap between panel and floor tile = 6 mm.
HighLine frame [floor]
*570769200xxxx
IntroductionChoose from frames for line solution in 10, 12, 15 or 25 mm heights for freely mounted floor unit.The frame is optional.The HighLine Panel, Cassette or Custom design must be selected (see pages 25 to 27).
27
8
65(H)
(L)8
36
Solutions [wall]
Line solution: 1004 in open bathroom with wall toward room.
Corner solution: 2001 in sunken corner niche.
Module solution: 1100 wall-to-wall in larger bathroom.
Line solution:1001 or 1004 in sunken niche in open bathroom. The model depends on the depth.
Build unidrain® into the corner or let it run around corners. Place unidrain® along a wall, in a sunken shower cubicle or quite simply wherever there is a need for it.The illustrations show examples of simple and functional shower cubicles that are possible using unidrain®’s unique floor drain system.
Endless possibilities
37
Solutions [wall]
Module solution: 1100 in larger niche with three walls.
Line solution: 1001 in niche with three walls.
Line solution: 1002 against the left wall.
Module solution: 1100 in inward corner.
38
1001 1002 1003 1004 2001
Product overview
Drain unit [wall]
Model
1001 1002 1003 1004 2001
Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.
Line 300 mm - - - - - - 1004.0300 5707692003238 - -
Line 700 mm 1001.0700 5707692003030 1002.0700 5707692003085 1003.0700 5707692003139 1004.0700 5707692003184 - -
Line 800 mm 1001.0800 5707692003047 1002.0800 5707692003092 1003.0800 5707692003146 1004.0800 5707692003191 - -
Line 900 mm 1001.0900 5707692003054 1002.0900 5707692003108 1003.0900 5707692003153 1004.0900 5707692003207 - -
Line 1.000 mm 1001.1000 5707692003061 1002.1000 5707692003115 1003.1000 5707692003160 1004.1000 5707692003214 - -
Line 1.200 mm 1001.1200 5707692003078 1002.1200 5707692003122 1003.1200 5707692003177 1004.1200 5707692003221 - -
Corner 200 mm - - - - - - - - 2001.0200 5707692002538
Mounting Element [wall]Model Item No. EAN No.
Line 100 mm 1860.0100 5707692006406
Line 135 mm 1860.0135 5707692006413
Outlet unit
ModelOutlet
dimension Direction Water trap Side inlet Item No. EAN No.
Line 1301 Ø 32 mm Horizontal Without Without 1301.0032 5707692002510
Line 1301 Ø 50 mm Horizontal Without Without 1301.0050 5707692006062
Line 1406 Ø 50 mm Horizontal With Without 1406.0050 5707692006055
Line 1401 Ø 50 mm Horizontal With Without 1401.0050 5707692001463
Line 1405 Ø 50 mm Horiz./side With Without 1405.0050 5707692002972
Line 1401 Ø 75 mm Horizontal With Without 1401.0075 5707692001470
Line 1402 Ø 75 mm Vertical With Without 1402.0075 5707692002484
Line 1403 Ø 75 mm Horizontal With 2 Ø 40 1403.0075 5707692002507
Line 1404 Ø 75 mm Vertical With 2 Ø 40 1404.0075 5707692002514
Line 1407 Ø 50 mm Horizontal With Without 1407.0050 5707692006703
Corner 2311 Ø 32 mm Horizontal Without Without 2311.0032 5707692002545
Corner 2311 Ø 50 mm Horizontal Without Without 2311.0050 5707692002552
Corner 2411 Ø 50 mm Horizontal With Without 2411.0050 5707692002569
Corner 2411 Ø 75 mm Horizontal With Without 2411.0075 5707692002576
Corner 2412 Ø 75 mm Vertical With Without 2412.0075 5707692002583
Corner 2413 Ø 75 mm Horizontal With With 2413.0075 5707692002590
Corner 2414 Ø 75 mm Vertical With With 2414.0075 5707692006642
Corner 2415 Ø 32 mm Horizontal With Without 2415.0032 5707692006789
Corner 2415 Ø 50 mm Horizontal With Without 2415.0050 5707692006796
ClassicLine frame [wall] Frame is mandatory
Model
8 mm (H) 10 mm (H) 12 mm (H)
Item No. EAN No. Item No. EAN No. Item No. EAN No.
Line 300 mm 1500.0308 5707692003245 1500.0310 5707692003252 1500.0312 5707692003269
Line 700 mm 1500.0708 5707692003276 1500.0710 5707692003283 1500.0712 5707692003290
Line 800 mm 1500.0808 5707692003306 1500.0810 5707692003313 1500.0812 5707692003320
Line 900 mm 1500.0908 5707692003337 1500.0910 5707692003344 1500.0912 5707692003351
Line 1.000 mm 1500.1008 5707692003368 1500.1010 5707692003375 1500.1012 5707692003382
Line 1.200 mm 1500.1208 5707692003399 1500.1210 5707692003405 1500.1212 5707692003412
Corner 200 mm 2501.0208 5707692002606 2501.0210 5707692002613 2501.0212 5707692002620
ClassicLine Soap Shelf
Model
Classic
Item No. EAN No.
Line 300 mm 1850.0301 5707692006369
Corner 200 mm 2850.0201 5707692006383
Model
Column
Item No. EAN No.
Line 300 mm 1850.0302 5707692006376
Corner 200 mm 2850.0202 5707692006390
ClassicLine grate
Model
Classic Column Inca Square Stripe
Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.
Line 300 mm 1601.0300 5707692002231 1602.0300 5707692002286 1603.0300 5707692002330 1604.0300 5707692002385 1605.0300 5707692002897
Line 700 mm 1601.0700 5707692001098 1602.0700 5707692001128 1603.0700 5707692001159 1604.0700 5707692001180 1605.0700 5707692002910
Line 800 mm 1601.0800 5707692001104 1602.0800 5707692001135 1603.0800 5707692001166 1604.0800 5707692001197 1605.0800 5707692002927
Line 900 mm 1601.0900 5707692001111 1602.0900 5707692001142 1603.0900 5707692001173 1604.0900 5707692001203 1605.0900 5707692002934
Line 1.000 mm 1601.1000 5707692002255 1602.1000 5707692002309 1603.1000 5707692003254 1604.1000 5707692002408 1605.1000 5707692002941
Line 1.200 mm 1601.1200 5707692002279 1602.1200 5707692002323 1603.1200 5707692002378 1604.1200 5707692002422 1605.1200 5707692002965
Corner 200 mm 2601.0200 5707692002651 2602.0200 5707692002668 - - - - - -
Mounting Set 22 mmModel [wall] [floor]
Line See page 9 See page 9
Corner See page 9 -
For line units over 1,200mm, we refer to Module 1100. For an elegant finish towards side walls at odd fitting dimensions we refer to Module 1100, Flex Frame.
Accessories
Model Artikel-Nr. EAN
Line Stainer 1810.0010 5707692002446
Line Water trap 1820.0010 5707692002439
Line Water trap* 1820.0020 5707692006079
Line Water trap* 1820.0030 5707692006710
Line Riser 35 1830.0035 5707692003436
Line Riser 55 1830.0055 5707692003443
Corner Stainer 2811.0010 5707692006666
Both Hook 1840.0000 5707692006802
Corner Water trap* 2821.0020 5707692006673
Corner Water trap** 2821.0030 5707692006680
Corner Riser 2830.0095 5707692006697* Er ikke VA godkendt.
HighLine frame [corner]Model Height Item No. EAN No.
Corner 10 mm 2910.0210 5707692006727
Corner 12 mm 2910.0212 5707692006734
Corner 15 mm 2910.0215 5707692006741
Corner 25 mm 2910.0225 5707692006758
HighLine Panel [corner]Model Fitting Item No. EAN No.
Corner With frame 2920.0200 5707692006765
Corner Without frame 2920.0201 5707692006772
3902
3002 3004
1100
A
B
C
D
Product overviewIntroduction
unidrain® is an intelligent and functional solution comprising just four parts, and like all good systems, the whole is greater than the sum of its parts. How the parts are combined depends on the placement of the outlet, the size of the bathroom and design preferences.
unidrain®’s four parts:
A: ClassicLine grate or HighLine panel – in various designs
B: ClassicLine or HighLine frame – in various heights
C: Drainunit–againstwallorfreelymountedintothefloor
D: Outlet unit – featuring various outlet dimensions and directions
A solution with just four parts
02-03 Introduction
04-05 Structure [wall]
06-07 Drain unit Line [wall]
08 Drain unit Corner [wall]
09 Mounting Set [wall] Mounting Element [wall]
10-13 Outlet units Line
14-17 Outlet units Corner
18 Accessory [line]
19 Accessory [corner]
20 ClassicLine frame [wall]
21 ClassicLine grate
22-23 ClassicLine Soap Shelf
24 HighLine frame [wall]
25 HighLine Panel
26 HighLine Cassette
27 HighLine Custom
28-29 HighLine Panel [corner]
30-31 Module 1100 [wall]
33 DrainunitLine[floor]
34 ClassicLineframe[floor]
35 HighLineframe[floor]
36-37 Solutions
38-39 Product overview
Contents
Colours provide overview!To provide you with a clear overview, unidrain’s products are divided into colour categories.The colour category system is part of unidrain’s graphic design line, which creates a sense of cohesion with our other brochures, price lists, ads and web etc.
Following its inception in 2003, unidrain®wasthefirstcompanyintheworldtoofferafloordrainagesystemdevelopedandapprovedforplacement against the wall. Withitspatentedsystem–usingoneormorehorizontalwallflangesthat act as a covering – Unidrain has solved the problem of providing waterproof bathroom solutions, traditionally the contruction industry’s second biggest problem area when it comes to damage control. In the space of a few years the unique system has become the constructionindustry’spreferredfloordrainagesystemwithmorethan 350,000 installations to date. Today unidrain® is synonymous with modernfloordrainsplacedagainstthewall.Byvirtueofourongoingdevelopment of building technology and design, we wish to remain thebuildingsector’spreferredsupplieroffloordrainagesystems.unidrain® can be used in all types of buildings with tiles: in connection with renovation, newbuilds and the private and public building sectors. unidrain® was developed by Danish architects in close asso-ciation with wet room technology experts and possesses all relevant local and international approvals. unidrain® has received several internationally acclaimed design awards, including the iF product design award and most recently The Danish Design Prize 2010/11 for the HighLine range.
www.unidrain.com
Award-winning originality
Outletunit[floor]
Model
3002 3004
Item No. EAN No. Item No. EAN No.
Line 300 mm - - 3004.0300 5707692006123
Line 700 mm 3002.0700 5707692006109 3004.0700 5707692006130
Line 900 mm 3002.0900 5707692006116 3004.0900 5707692006147
HighLine frame [wall] Frame optional
Model
10 mm (H) 12 mm (H) 15 mm (H) 25 mm (H)
Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.
Line 300 mm 1910.0310 5707692004242 1910.0312 5707692004303 1910.0315 5707692004365 1910.0325 5707692004426
Line 700 mm 1910.0710 5707692004259 1910.0712 5707692004310 1910.0715 5707692004372 1910.0725 5707692004433
Line 800 mm 1910.0810 5707692004266 1910.0812 5707692004327 1910.0815 5707692004389 1910.0825 5707692004440
Line 900 mm 1910.0910 5707692004273 1910.0912 5707692004334 1910.0915 5707692004396 1910.0925 5707692004457
Line 1,000 mm 1910.1010 5707692004280 1910.1012 5707692004341 1910.1015 5707692004402 1910.1025 5707692004464
Line 1,200 mm 1910.1210 5707692004297 1910.1212 5707692004358 1910.1215 5707692004419 1910.1225 5707692004471
HighLine Custom
Model mm Item No. EAN No.
Line 300 1950.0300 5707692005324
Line 700 1950.0700 5707692005331
Line 800 1950.0800 5707692005348
Line 900 1950.0900 5707692005355
Line 1,000 1950.1000 5707692005362
Line 1,200 1950.1200 5707692005379
HighLine Cassette
Model mm10 mm (H) 12 mm (H) 15 mm (H) 25 mm (H)
Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.
Line 300 1940.0310 5707692005089 1940.0312 5707692005140 1940.0315 5707692005201 1940.0325 5707692005263
Line 700 1940.0710 5707692005096 1940.0712 5707692005157 1940.0715 5707692005218 1940.0725 5707692005270
Line 800 1940.0810 5707692005102 1940.0812 5707692005164 1940.0815 5707692005225 1940.0825 5707692005287
Line 900 1940.0910 5707692005119 1940.0912 5707692005171 1940.0915 5707692005232 1940.0925 5707692005294
Line 1,000 1940.1010 5707692005126 1940.1012 5707692005188 1940.1015 5707692005249 1940.1025 5707692005300
Line 1,200 1940.1210 5707692005133 1940.1212 5707692005195 1940.1215 5707692005256 1940.1225 5707692005317
HighLine Panel
ModelRustfrit stål børstet Corian® Nocturne Corian® Hot Frosted glas, White Frosted glas, Black
Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.
Line 300 mm 1920.0300 5707692004488 1922.0300 5707692004600 1926.0300 5707692004846 1930.0300 5707692006819 1931.0300 5707692006871
Line 700 mm 1920.0700 5707692004495 1922.0700 5707692004617 1926.0700 5707692004853 1930.0700 5707692006826 1931.0700 5707692006888
Line 800 mm 1920.0800 5707692004501 1922.0800 5707692004624 1926.0800 5707692004860 1930.0800 5707692006833 1931.0800 5707692006895
Line 900 mm 1920.0900 5707692004518 1922.0900 5707692004631 1926.0900 5707692004877 1930.0900 5707692006840 1931.0900 5707692006901
Line 1,000 mm 1920.1000 5707692004525 1922.1000 5707692004648 1926.1000 5707692004884 1930.1000 5707692006857 1931.1000 5707692006918
Line 1,200 mm 1920.1200 5707692004532 1922.1200 5707692004655 1926.1200 5707692004891 1930.1200 5707692006864 1931.1200 5707692006925
Other Corian® colours are available on request (a minimum of 10 pcs.).
ClassicLineframe[floor] Frame is mandatory
Model8 mm (H) 10 mm (H) 12 mm (H)
Item No. EAN No. Item No. EAN No. Item No. EAN No.
Line 300 mm 3500.0308 5707692006154 3500.0310 5707692006161 3500.0312 5707692006178
Line 700 mm 3500.0708 5707692006185 3500.0710 5707692006192 3500.0712 5707692006208
Line 900 mm 3500.0908 5707692006215 3500.0910 5707692006208 3500.0912 5707692006239Select ClassicLine grate.
HighLineframe[floor] Frame optional
Model10 mm (H) 12 mm (H) 15 mm (H) 25 mm (H)
Item No. EAN No. Item No. EAN No. Item No. EAN No. Item No. EAN No.
Line 300 mm 3910.0310 5707692006246 3910.0312 5707692006253 3910.0315 5707692006260 3910.0325 5707692006277
Line 700 mm 3910.0710 5707692006284 3910.0712 5707692006292 3910.0715 5707692006307 3910.0725 5707692006314
Line 900 mm 3910.0910 5707692006321 3910.0912 5707692006338 3910.0915 5707692006345 3910.0925 5707692006352Select HighLine Panel, Cassette or Custom.
!
Module 1100 [wall]Model 1100
Line See pages 30 to 31
Flex FrameModel ClassicLine HighLine
Line See product overview page 31
Contact unidrain® for more information about Module 1100.Module 1100 mounted freely intofloor(withoutbackflange)is available on request.