Dental Guide System

Are you using the guide system?

You’re not?

Why?Too expensive ?

Too complicated ? Uncomfortable?

Limited usage of implant?

We can help you solve these.

Change your mind that implant

guide system is still expensive,

difficult and complex!

Dental Guide System

More

Digital TechnologyDENTIS offers solutions focused on predictability, reduced risk and enhanced outcomes: from 3D treatment planning of your case, to implant site preparation with the Simple Guide System,

to ZENITH 3D Printing System.

Simple Guide System

forUser

Safer, reduced chair time and better esthetics outcome.

Dental Guide System SIMPLE GUIDE

Optimize the restorative outcome• Offer high esthetics and function to your patients with a

comprehensive range of prosthetic solutions.

Predictable implant placement• Make your treatment plan a clinical reality with customized

surgical templates.

Experience powerful diagnostics and treatment planning• Avoid surprises during the treatment process through

careful diagnosis and treatment planning with the open

software. DENTIS would provide you proper education.

Increase patient satisfaction

• Achieve the best possible outcome even you have different

implant systems.

Simple Guide System (vs) General implant surgery

Description Gingival incision Temporary prosthetics Chair time Recovery period

Simple Guide No needCAD/CAM or

3D PrinterSHORT No need

General

implant surgeryNeed Dental Laboratory LONG Need

forPatient

Guide Surgery Work Process

6 I SIMPLE GUIDE

Finish everything of your case within a day with ZENITH 3D printing system.

Diagnostics CT & Scanning3D diagnostics and treatment planning

Making surgical guide by ZENITH 3D Printer

GuideSurgery

3D diagnostics and treatment planningVisualize the patient’s (CB)CT data together with the intra-oral situation including soft tissue and the diagnostic tooth setup by Blue Sky Plan.

Making surgical guideExtract the data after planning and make surgical guide by ZENITH 3D printerYou can easily, quickly and economically make surgical guide by yourself in your clinic

3 4

Clinical diagnostics and treatment acceptanceExamine & diagnose your patient and get treatment acceptance from your patient before making further investments

CT & ScanningMake a (CB)CT scan and digitize patient’s information by oral scanner or model scanner.

1 2

Guide surgery Go for fully guided drilling and implant insertion using a customized surgical template based on your treatment plan.

5

Surgical guide

Remove surgical guide

Point drilling (Cortical Drill)

Initial & Path drilling

Universal Surgical Guide Kit!

DENTIS Simple Guide Kit can be used with other implant system.

Go for final drilling according to the sequence of each implant system.

SIMPLE GUIDE I 7

DISTINCTIVENESS

UniversalConvenient

Economic SystemDENTIS Simple Guide System is cost-effective compared with other guide systems

■ Free software■ Simple surgical tools■ ZENITH 3D Printing System

Simple SystemSimple Guide System is being conducted with only 11 surgical tools matching and drilling simply.

■ Simple surgical kit■ Simple process■ Simple drilling protocol

1

3

2

4Convenient SystemSimple Guide System applies the Open-Sleeve showing enhanced convenience and allowing water-irrigation to prevent over-heating.

■ Open sleeve■ Good irrigation

Universal SystemDENTIS Simple Guide Kit can be used with not only DENTIS implant, but also every implant system in the world.

■ All implant system■ Flap or flapless surgery

SimpleEconomic

Economic Guide System

8 I SIMPLE GUIDE

Free SoftwareThere is no extra charge at all for the software01

Simple Surgical KitSimplified components reduce the cost of surgical tool.

02

ZENITH 3D Printing SystemProduction cost is remarkably reduced by extracting data from the software and making surgical guide in your clinic with ZENITH 3D printer.

03

Software Download

https://blueskybio.com/pages/blue-sky-plan-guided-surgery-software

SIMPLE GUIDE I 9

Simple Guide System

Simple Surgical KitDENTIS Simple Guide Kit is only made up by 11 surgical tools, while the other systems are made up by dozens of surgical tools.

01

Simple ProcessProcess is simpler than general guide system and adjustment by oral scanner is also easier.

02

Tissue punch function

Simple Drilling Protocol Drilling protocol became much simpler because there is no need to use tissue punch and drill guide. Just remove surgical guide after Φ2.8 drilling, and place an Implant according to the procedure of each implant system.

03

Tissue punch Drill guide

1 Diagnostics 2 CT & Scanning 3 3D diagnostics and

treatment planning 4 Making surgical

guide 5 Implant surgery

Convenient Guide System

10 I SIMPLE GUIDE

Open SleeveSide approach allows drilling in low occlusal height of posterior teeth.01

Common sleeve

Occlusal ApproachHand-piece can get stuck in the

antagonistic teeth.

Side ApproachHand-piece doesn’t get stuck in the

antagonistic teeth.

Open Sleeve

3mmØ4Ø7.5

ApproachApproach

Ø5.5

6mm5mm

SIMPLE GUIDE I 11

Open part of the sleeve allow water-irrigation preventing over-heating.

ZENITH 3D Printing SystemManufacture the accurate surgical guide in your clinic by yourself!02

Sending CT and scan data

Dental Clinic

Dental Clinic

Dental Lab

CenterSimulation

Making surgical guide (about 5 days)

Confirmation of Diagnostics

Common guide system DENTIS Simple guide system

Every process

by one stop service.

12 I SIMPLE GUIDE

Surgical GuideSleeve +

Surgical Guide 10mm

Bone

Tissue

Cortical Drill Ø2.3 x 8mmStarter Drill Ø2.2 Pilot Drill Ø2.8 x 8mm

Intermediate Drill

Universal Guide System

Simple Guide Drill

A Starter drill (Ø2.3x8mm) and Intermediate drill (Ø2.8x8mm) are just 8mm.

C Ø2.3 → Ø2.2 drilling •Ø2.2 drilling • For smooth drilling and maintaining path

(0.1mm gap) when you drill a Ø2.2 hole for depth extension after Ø2.3x8mm drilling.

•Simplification of kit composition

B Ø2.2 Pilot drill is for depth extension •Made up by 10, 12, 14mm •Choose proper drill according to fixture’s length

DENTIS Simple Guide System is compatible with any other implant systems in the world.01

Flapless surgery is recommended basically, but flap surgery can be possible according to your case.02

Place your Implant according to the procedure

of each implant system

SIMPLE GUIDE I 13

Only 11 components for Simple Guide Surgery!

Simple Guide Surgical Kit

Sleeve

DSGDR

Planning S/W

www.blueskybio.com

(Blue Sky Plan)

Mount Driver

DRHDL24

Cortical Drill

DCD

Ø2.3 X 8mmStarter Drill

DSGD2308

Ø2.2 x 10mmPilot Drill

DSGD2210

Ø2.2 x 12mmPilot Drill

DSGD2212

Ø2.2 x 14mmPilot Drill

DSGD2214

Ø2.8 x 8mm Intermediate Drill

DSGD2808

Anchor Drill

DGATD

Anchor Screw

DGAS18

18mm

Ø3

GIOKE

14 I SIMPLE GUIDE

ZENITH® 3D Printing

System

Surgical Guide

Wax-up

Dental Model

Clear Aligner

DIGITAL DENTISTRY withZENITH® 3D Printing System

Efficiently, effectively, and professionallyproduce the superb results by ZENITHⓇ 3D Printer

http://dentisimplant.co.kr/eng/

ⓒ2015 DENTIS CO.,LTD.All Right Reserved.Specifications are subject to change without notice.Trademarks are the property of DENTIS CO., LTD. Or their respective owners. D-C-SG-V2-201506-ENG

DENTIS Co., LTD.(Headquarters)

Tel. +82-53-583-2804~5Fax. +82-53-583-280699, Seongseoseo-Ro, Dalseo-Gu, Daegu, Korea

DENTIS USA

Tel. +1-323-677-4363~5Fax. +1-323-677-43666 Centerpointe Drive, Suite 600 La Palma CA 90623

DENTIS TAIWAN

Tel. +886-2-2808-5933Fax. +886-2-2624-23092F.,No.48,31,Minzu Rd., Tamsui Dist, New Taipei City 251,Taiwan(R.O.C.)