Upload
mark-bishop
View
213
Download
0
Embed Size (px)
Citation preview
Silver-Line SL-7 RepairsSilver-Line SL-7 Repairs
Removing the Disc Pad
Remove the Dust Tube Remove the Dust Tube ElbowElbow
Remove the 4 Screws & the elbow
Keep the screws & elbow stored together
Removing the Dust Tube Elbow exposes the fan on the armature
Turn the Edger OverTurn the Edger Over
Turning the edger over to gain access to the disc pad that you are attempting to remove
Remove the Bolt & WasherRemove the Bolt & Washer
Unscrew the bolt & washer from the jackshaft. The bolt and washer will not allow the disc pad to come off the jackshaft if they are still on the machine.
Jam the Armature FanJam the Armature Fan
Use the handle of a screwdriver or hammer to jam the armature fan.
Turn the disc pad counter clock wise till the handle is locked against the body of the edger.
Insert the Disc Pad Insert the Disc Pad RemoverRemover
Insert the bolts in the disc pad remover into the holes in the disc pad.
The bolts are spaced to fill the holes farthest apart.
Using the Disc Pad Using the Disc Pad RemoverRemover
Position the Disc Pad Remover as shown
Hit the edge of the remover with a hammer in a Counter Clock-Wise Direction
Turn Disc PadTurn Disc Pad
Use the Disc Pad Remover until the disc pad can be spun by hand
Remove the Disc PadRemove the Disc Pad
Once the disc pad has been unthreaded, discard the unit
Remember, the disc pad is threaded to the outside of the jackshaft, and the bolt & washer thread inside the jackshaft!