Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
bull Resistance to UV raysbull Low modulus of elasticitybull 15 colours
Neutral cured silicone sealant with anti-mold agent for windows and sanitary use
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
WINDOW amp SANITARY PROFESSIONAL
Window amp Sanitary a neutral silicone-based sealant with a low modulus of elasticity UV ray and atmospheric agent resistant ideal for use with doors and windows compliant with UNI 11673-1 ldquoFitting doors and windows Part 1 project verification requirements and criteriardquoThe presence in the formulation of an antimicrobial agent and an algae inhibitor makes it suitable also for sanitary environments the product is resistant to boiling water and washing with chemically-aggressive detergents thus contributing to surface hygiene Thanks to the neutral skin-over it does not emit unpleasant odours during application releases no acid or base substances that might corrode metal substrates and does not attack paints It gives excellent adhesion on both porous (masonry concrete plaster wood) and non-porous substrates (metal plastic glass painted and glazed surfaces)Window amp Sanitary is classified as a non-structural sealant for glazing (type G) in compliance with EN 15651-2) and for sanitary use (type XS) in compliance with 15651-3 The product awarded the EC 1 Plus label by the GEV association for very low emissions of volatile organic compounds
FEATURES
GEN 15651-2
Silicone Sealant
Window amp Sanitary ideal forbull seals between glass and fixture (metal pre-painted wood or plastic)bull joint seals for connections between fixture and wall (masonry concrete plaster)bull waterproof seals also mould-resistant on the connection joints in bathrooms (tub shower booth wash basins) SPA environments and poolsIts features mean that the seals absorb the movements transmitted to windows and the fixture by atmospheric phenomena vibrations and mechanical stress Window amp Sanitary elastically connects the window or door to the wall and non-detachably absorbs the movement of the confining construction members originated by thermo-hygrometric dilations or land settling It thus guarantees a long-lasting perfect seal against water and air and reduces heat loss while preventing mould formation
APPLICATION RANGEIN COMPLIANCE WITH
XSIN COMPLIANCE WITH
EN 15651-3
INSTRUCTIONS FOR USE
The sides of the joint must be clean degreased and dry With porous substrates it is recommended to first treat with Primer Silicon With deep dilation joints pad with rigid shaped foam elements before sealing
Apply adhesive tape along the sides of the joint
Insert the cartridge in the application gun open it screw on the spout and cut off the tip to obtain a sufficient aperture
Extrude an abundant quantity of sealant
Smooth off with a damp paint scraper within 5 minutes of application exerting enough pressure to remove any air bubbles
Remove the adhesive tape
1
2
3
4
5
6
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
CLEANING OF TOOLS
SIZING OF THE JOINT
While the sealant is in the plastic state use solvents following setting clean only mechanically
Minimum width = 6 mm For joint widths of less than 10 mm the depth must be equal to the width of the joint and in any case not less than 6 mm For joint widths between 10 mm and 20 mm the depth must be at least 10 mm For widths larger than 20 mm the depth must be at least half of the width
Window amp Sanitary is not suitable for structural bonding Not suitable for marble or natural stone substrates In this case use Marble or Universal
OBSERVATIONS
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
TECHNICAL SPECIFICATIONS
310 ml cartridgesPACKAGING
STORAGE
Torggler Internal Methods (MIT) are available on request
Window amp Sanitary must be stored in a cool dry place Stored in these conditions the product will keep for at least 12 months Partly used cartridges can be stored for approx 3 months provided they are tightly closed
PARAMETER AND TEST METHOD WampS GLOSSY WampS MATT
Colours trasparent metallic grey metallic brown metallic green metallic inox metallic aluminium
white white RAL 9010 ivory grey anthracite black brown brick-red green RAL 6005
Density (ISO 1183-1) 102 gml 13 gml
Application temperature from +5 degC to +40 degC from +5 degC to +40 degC
Skin-over time (MIT 33) 20 minutes 20 minutes
Hardening rate from the outside to the inside at 23 degC (MIT 32)
2 mm in 24 h 15 mm in 24 h
Operating temperature from -30 degC to +150 degC from -30 degC to +150 degC
Surface hardness (ISO 868) Shore A max = 30 15= 15 Shore A max = 35 15= 20
Volume variation (EN ISO 10563) 4 4
Creep resistance (EN ISO 7390) 00 mm 00 mm
Elongation at break (DIN 53504 - Punch S3) 750 500
Tensile strength at break (DIN 53504 - Punch S3)
10 Nmmsup2 09 Nmmsup2
Modulus of elasticity at 100 (DIN 53504 -Punch S3)
03 Nmmsup2 04 Nmmsup2
Stretching to breaking point (EN ISO 8339A-GAI)
270 300
Tensile strength at break (EN ISO 8339A-GAI)
04 Nmmsup2 04 Nmmsup2
Modulus of elasticity at 100 (EN ISO 8339A-GAI)
025 Nmmsup2 025 Nmmsup2
Elastic recovery (EN ISO 7389B-GAI) gt 80 gt 80
Maximum operating elongation (ISO 11600) 25 25
Resistance to acid excellent excellent
Resistance to bases excellent excellent
Odour after skin-over none none
COVERAGE GUIDE TABLEJOINT WIDTH X DEPTH (MM) QUANTITY USED PER
LINEAR METRELINEAR METRES COVERED WITH ONE CARTRIDGE
6x6 36 ml 87
8x8 64 ml 49
10x10 100 ml 31
15x10 150 ml 21
20x10 200 ml 15
Trasparent
White
White RAL 9010
Ivory
Grey
Anthracite
Black
Brown
Brick-red
Green RAL 6005
Grey
Brown
Green
Inox
Aluminium
Colours metallic
COLOUR RANGE
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
The declarations of performance (DoP) are available on request
To the best of our knowledge the information given in this document is true and accurate However since we have no direct control over the actual conditions of use our recommendations and suggestions are provided as a guide only and do not constitute a guarantee If you have any doubts we recommend that you test the product before use or contact our specialists for further advice Torggler Chimica SpA reserves the right to change substitute or delete items or otherwise make variations to the product data in this document without prior notice It is possible therefore that the information given in this document is no longer valid This document substitutes the previous version Version 072019
Reaction to fire F
Release of dangerous substances for health and environment NPD
Impermeabilitagrave allacqua ed allaria
Loss of volume le 10
Vertical flow resistance le 3 mm
Adhesivecohesive properties after exposure to heat water and artificial light
NF
Elastic recovery ge 60
Tensile properties (adhesivecohesive properties after maintained extension at -30 degC)
NF
Tensile properties (secant modulus at -30 degC) le 09 Nmm2
Adhesivecohesive properties after immersion in water and maintained extension at 23 degC)
NF
Microbiological growth 0
Durability Passed
Torggler Chimica SpA Via Verande 1A ndash 39012 Merano (BZ)
18
DoP ndeg 10118
NB ndeg 1213
EN 15651-22012 EN 15651-32012
Silicone Window amp Sanitary Non structural sealant for glazing applications(intended for use in cold climates) and for joints for application in sanitary areas
EN 15651-2 -3 G-CC XS
Conditioning ISO 8339A Substrate Gup
LEGENDA FOR CLASSIFICATION ACCORDING TO EN 15651F Sealant for non-structural joints for the building trade on facades (F = facade elements)
INT Sealant for internal use only
EXT-INT Sealant for internal and external use
CC Sealant tested for cold climates (CC = cold climate - testing done at -30 degC)
G Sealant for non-structural joints on glazing and door and window frames (G = glazing)
S Sealant for non-structural joints in bathroom installations (S = sanitary joints)
XS Sealant for joints in bathroom installations with improved performance
PW Sealant for non-structural joints on pedestrian walkways (PW = pedestrian walkways)
CERTIFICATIONS
INSTRUCTIONS FOR USE
The sides of the joint must be clean degreased and dry With porous substrates it is recommended to first treat with Primer Silicon With deep dilation joints pad with rigid shaped foam elements before sealing
Apply adhesive tape along the sides of the joint
Insert the cartridge in the application gun open it screw on the spout and cut off the tip to obtain a sufficient aperture
Extrude an abundant quantity of sealant
Smooth off with a damp paint scraper within 5 minutes of application exerting enough pressure to remove any air bubbles
Remove the adhesive tape
1
2
3
4
5
6
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
CLEANING OF TOOLS
SIZING OF THE JOINT
While the sealant is in the plastic state use solvents following setting clean only mechanically
Minimum width = 6 mm For joint widths of less than 10 mm the depth must be equal to the width of the joint and in any case not less than 6 mm For joint widths between 10 mm and 20 mm the depth must be at least 10 mm For widths larger than 20 mm the depth must be at least half of the width
Window amp Sanitary is not suitable for structural bonding Not suitable for marble or natural stone substrates In this case use Marble or Universal
OBSERVATIONS
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
TECHNICAL SPECIFICATIONS
310 ml cartridgesPACKAGING
STORAGE
Torggler Internal Methods (MIT) are available on request
Window amp Sanitary must be stored in a cool dry place Stored in these conditions the product will keep for at least 12 months Partly used cartridges can be stored for approx 3 months provided they are tightly closed
PARAMETER AND TEST METHOD WampS GLOSSY WampS MATT
Colours trasparent metallic grey metallic brown metallic green metallic inox metallic aluminium
white white RAL 9010 ivory grey anthracite black brown brick-red green RAL 6005
Density (ISO 1183-1) 102 gml 13 gml
Application temperature from +5 degC to +40 degC from +5 degC to +40 degC
Skin-over time (MIT 33) 20 minutes 20 minutes
Hardening rate from the outside to the inside at 23 degC (MIT 32)
2 mm in 24 h 15 mm in 24 h
Operating temperature from -30 degC to +150 degC from -30 degC to +150 degC
Surface hardness (ISO 868) Shore A max = 30 15= 15 Shore A max = 35 15= 20
Volume variation (EN ISO 10563) 4 4
Creep resistance (EN ISO 7390) 00 mm 00 mm
Elongation at break (DIN 53504 - Punch S3) 750 500
Tensile strength at break (DIN 53504 - Punch S3)
10 Nmmsup2 09 Nmmsup2
Modulus of elasticity at 100 (DIN 53504 -Punch S3)
03 Nmmsup2 04 Nmmsup2
Stretching to breaking point (EN ISO 8339A-GAI)
270 300
Tensile strength at break (EN ISO 8339A-GAI)
04 Nmmsup2 04 Nmmsup2
Modulus of elasticity at 100 (EN ISO 8339A-GAI)
025 Nmmsup2 025 Nmmsup2
Elastic recovery (EN ISO 7389B-GAI) gt 80 gt 80
Maximum operating elongation (ISO 11600) 25 25
Resistance to acid excellent excellent
Resistance to bases excellent excellent
Odour after skin-over none none
COVERAGE GUIDE TABLEJOINT WIDTH X DEPTH (MM) QUANTITY USED PER
LINEAR METRELINEAR METRES COVERED WITH ONE CARTRIDGE
6x6 36 ml 87
8x8 64 ml 49
10x10 100 ml 31
15x10 150 ml 21
20x10 200 ml 15
Trasparent
White
White RAL 9010
Ivory
Grey
Anthracite
Black
Brown
Brick-red
Green RAL 6005
Grey
Brown
Green
Inox
Aluminium
Colours metallic
COLOUR RANGE
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
The declarations of performance (DoP) are available on request
To the best of our knowledge the information given in this document is true and accurate However since we have no direct control over the actual conditions of use our recommendations and suggestions are provided as a guide only and do not constitute a guarantee If you have any doubts we recommend that you test the product before use or contact our specialists for further advice Torggler Chimica SpA reserves the right to change substitute or delete items or otherwise make variations to the product data in this document without prior notice It is possible therefore that the information given in this document is no longer valid This document substitutes the previous version Version 072019
Reaction to fire F
Release of dangerous substances for health and environment NPD
Impermeabilitagrave allacqua ed allaria
Loss of volume le 10
Vertical flow resistance le 3 mm
Adhesivecohesive properties after exposure to heat water and artificial light
NF
Elastic recovery ge 60
Tensile properties (adhesivecohesive properties after maintained extension at -30 degC)
NF
Tensile properties (secant modulus at -30 degC) le 09 Nmm2
Adhesivecohesive properties after immersion in water and maintained extension at 23 degC)
NF
Microbiological growth 0
Durability Passed
Torggler Chimica SpA Via Verande 1A ndash 39012 Merano (BZ)
18
DoP ndeg 10118
NB ndeg 1213
EN 15651-22012 EN 15651-32012
Silicone Window amp Sanitary Non structural sealant for glazing applications(intended for use in cold climates) and for joints for application in sanitary areas
EN 15651-2 -3 G-CC XS
Conditioning ISO 8339A Substrate Gup
LEGENDA FOR CLASSIFICATION ACCORDING TO EN 15651F Sealant for non-structural joints for the building trade on facades (F = facade elements)
INT Sealant for internal use only
EXT-INT Sealant for internal and external use
CC Sealant tested for cold climates (CC = cold climate - testing done at -30 degC)
G Sealant for non-structural joints on glazing and door and window frames (G = glazing)
S Sealant for non-structural joints in bathroom installations (S = sanitary joints)
XS Sealant for joints in bathroom installations with improved performance
PW Sealant for non-structural joints on pedestrian walkways (PW = pedestrian walkways)
CERTIFICATIONS
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
TECHNICAL SPECIFICATIONS
310 ml cartridgesPACKAGING
STORAGE
Torggler Internal Methods (MIT) are available on request
Window amp Sanitary must be stored in a cool dry place Stored in these conditions the product will keep for at least 12 months Partly used cartridges can be stored for approx 3 months provided they are tightly closed
PARAMETER AND TEST METHOD WampS GLOSSY WampS MATT
Colours trasparent metallic grey metallic brown metallic green metallic inox metallic aluminium
white white RAL 9010 ivory grey anthracite black brown brick-red green RAL 6005
Density (ISO 1183-1) 102 gml 13 gml
Application temperature from +5 degC to +40 degC from +5 degC to +40 degC
Skin-over time (MIT 33) 20 minutes 20 minutes
Hardening rate from the outside to the inside at 23 degC (MIT 32)
2 mm in 24 h 15 mm in 24 h
Operating temperature from -30 degC to +150 degC from -30 degC to +150 degC
Surface hardness (ISO 868) Shore A max = 30 15= 15 Shore A max = 35 15= 20
Volume variation (EN ISO 10563) 4 4
Creep resistance (EN ISO 7390) 00 mm 00 mm
Elongation at break (DIN 53504 - Punch S3) 750 500
Tensile strength at break (DIN 53504 - Punch S3)
10 Nmmsup2 09 Nmmsup2
Modulus of elasticity at 100 (DIN 53504 -Punch S3)
03 Nmmsup2 04 Nmmsup2
Stretching to breaking point (EN ISO 8339A-GAI)
270 300
Tensile strength at break (EN ISO 8339A-GAI)
04 Nmmsup2 04 Nmmsup2
Modulus of elasticity at 100 (EN ISO 8339A-GAI)
025 Nmmsup2 025 Nmmsup2
Elastic recovery (EN ISO 7389B-GAI) gt 80 gt 80
Maximum operating elongation (ISO 11600) 25 25
Resistance to acid excellent excellent
Resistance to bases excellent excellent
Odour after skin-over none none
COVERAGE GUIDE TABLEJOINT WIDTH X DEPTH (MM) QUANTITY USED PER
LINEAR METRELINEAR METRES COVERED WITH ONE CARTRIDGE
6x6 36 ml 87
8x8 64 ml 49
10x10 100 ml 31
15x10 150 ml 21
20x10 200 ml 15
Trasparent
White
White RAL 9010
Ivory
Grey
Anthracite
Black
Brown
Brick-red
Green RAL 6005
Grey
Brown
Green
Inox
Aluminium
Colours metallic
COLOUR RANGE
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
The declarations of performance (DoP) are available on request
To the best of our knowledge the information given in this document is true and accurate However since we have no direct control over the actual conditions of use our recommendations and suggestions are provided as a guide only and do not constitute a guarantee If you have any doubts we recommend that you test the product before use or contact our specialists for further advice Torggler Chimica SpA reserves the right to change substitute or delete items or otherwise make variations to the product data in this document without prior notice It is possible therefore that the information given in this document is no longer valid This document substitutes the previous version Version 072019
Reaction to fire F
Release of dangerous substances for health and environment NPD
Impermeabilitagrave allacqua ed allaria
Loss of volume le 10
Vertical flow resistance le 3 mm
Adhesivecohesive properties after exposure to heat water and artificial light
NF
Elastic recovery ge 60
Tensile properties (adhesivecohesive properties after maintained extension at -30 degC)
NF
Tensile properties (secant modulus at -30 degC) le 09 Nmm2
Adhesivecohesive properties after immersion in water and maintained extension at 23 degC)
NF
Microbiological growth 0
Durability Passed
Torggler Chimica SpA Via Verande 1A ndash 39012 Merano (BZ)
18
DoP ndeg 10118
NB ndeg 1213
EN 15651-22012 EN 15651-32012
Silicone Window amp Sanitary Non structural sealant for glazing applications(intended for use in cold climates) and for joints for application in sanitary areas
EN 15651-2 -3 G-CC XS
Conditioning ISO 8339A Substrate Gup
LEGENDA FOR CLASSIFICATION ACCORDING TO EN 15651F Sealant for non-structural joints for the building trade on facades (F = facade elements)
INT Sealant for internal use only
EXT-INT Sealant for internal and external use
CC Sealant tested for cold climates (CC = cold climate - testing done at -30 degC)
G Sealant for non-structural joints on glazing and door and window frames (G = glazing)
S Sealant for non-structural joints in bathroom installations (S = sanitary joints)
XS Sealant for joints in bathroom installations with improved performance
PW Sealant for non-structural joints on pedestrian walkways (PW = pedestrian walkways)
CERTIFICATIONS
Torggler Chimica SpA Via Verande 1A 39012 Merano (BZ) Italia Tel +39 0473 282400 Fax +39 0473 282501 wwwtorgglercom infotorgglercom
The declarations of performance (DoP) are available on request
To the best of our knowledge the information given in this document is true and accurate However since we have no direct control over the actual conditions of use our recommendations and suggestions are provided as a guide only and do not constitute a guarantee If you have any doubts we recommend that you test the product before use or contact our specialists for further advice Torggler Chimica SpA reserves the right to change substitute or delete items or otherwise make variations to the product data in this document without prior notice It is possible therefore that the information given in this document is no longer valid This document substitutes the previous version Version 072019
Reaction to fire F
Release of dangerous substances for health and environment NPD
Impermeabilitagrave allacqua ed allaria
Loss of volume le 10
Vertical flow resistance le 3 mm
Adhesivecohesive properties after exposure to heat water and artificial light
NF
Elastic recovery ge 60
Tensile properties (adhesivecohesive properties after maintained extension at -30 degC)
NF
Tensile properties (secant modulus at -30 degC) le 09 Nmm2
Adhesivecohesive properties after immersion in water and maintained extension at 23 degC)
NF
Microbiological growth 0
Durability Passed
Torggler Chimica SpA Via Verande 1A ndash 39012 Merano (BZ)
18
DoP ndeg 10118
NB ndeg 1213
EN 15651-22012 EN 15651-32012
Silicone Window amp Sanitary Non structural sealant for glazing applications(intended for use in cold climates) and for joints for application in sanitary areas
EN 15651-2 -3 G-CC XS
Conditioning ISO 8339A Substrate Gup
LEGENDA FOR CLASSIFICATION ACCORDING TO EN 15651F Sealant for non-structural joints for the building trade on facades (F = facade elements)
INT Sealant for internal use only
EXT-INT Sealant for internal and external use
CC Sealant tested for cold climates (CC = cold climate - testing done at -30 degC)
G Sealant for non-structural joints on glazing and door and window frames (G = glazing)
S Sealant for non-structural joints in bathroom installations (S = sanitary joints)
XS Sealant for joints in bathroom installations with improved performance
PW Sealant for non-structural joints on pedestrian walkways (PW = pedestrian walkways)
CERTIFICATIONS