Upload
vuonglien
View
213
Download
0
Embed Size (px)
Citation preview
Silencer Catalog
“Are YOU ready to be part of the Solution?”
For products not included in the catalog, please contact us for a quote.
4010 NW 39th St
Lincoln, NE 68524
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc.
Rev040717-A
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
TABLE OF CONTENTS
SILENCER SERIES PAGE(S)
CRITICAL GRADE 600C 3-5
600C Slim Series Silencer – No Packing 3
601C Slim Series Silencer – 1” Packing 4
602C Slim Series Silencer - 2” Packing 5
HOSPITAL GRADE 600H 6-7
601H Slim Series Silencer - 1” Packing 6
602H Slim Series Silencer - 2” Packing 7
RESIDENTIAL GRADE 700R 8-9
700R Disk Silencer – No Packing 8
701R Disk Silencer - 1” Packing 9
CRITICAL GRADE 700C 10-12
700C Disk Silencer – No Packing 10
701C Disk Silencer - 1” Packing 11
702C Disk Silencer - 2” Packing 12
HOSPITAL GRADE 700H 13-14
701H Disk Silencer - 1” Packing 13
702H Disk Silencer - 2” Packing 14
INDUSTRIAL GRADE 900I 15
900I Cylindrical Silencer 15
RESIDENTIAL GRADE 900R 16
900R Cylindrical Silencer 16
CRITICAL GRADE 900C 17
900C Cylindrical Silencer 17
HOSPITAL GRADE 900H 18
900H Cylindrical Silencer 18
TERMS & CONDITIONS 19
WARRANTY 20
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
3
Questions?
888-467-5562
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 600C SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered to provide a high degree of
attenuation in a low, space-saving design.
Good where ambient noise levels are relatively
low.
Excellent for any application where size
restriction is a critical factor.
Standard finish is high heat black.
No internal packing.
Ideal for use where heat loss is not a critical
factor.
Typical Attenuation: 31 to 38 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
CRITICAL GRADE OPTIONS All 600C series are all-welded heavy duty carbon
steel.
Available in three options: 600C, 601C, 602C
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
600C Dimensions (inches) Part
Number A B C
OAL
1
OAL
2
OAL
3 F G H WT
600C2-04 4 9 26 34 30 26 5 5 8.5 105
600C2-05 5 10 28 35 31 27 6 6 9 140
600C2-06 6 11 32 39 35 31 6 6 9.5 190
600C2-08 8 13 42 52 48 44 7 7 10.5 355
600C2-10 10 16 50 58 54 50 8 8 12 515
600C2-12 12 19 60 68 64 60 9 9 13.5 720
600C2-14 14 21 62 72 68 64 10 10 14.5 860
600C2-16 16 23 72 81 77 73 11 11 15.5 1,195
600C2-18 18 25 82 92 88 84 12 12 16.5 1,460
600C2-20 20 28 86 96 92 88 14 14 18 1,775
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 6 Slim Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 0 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade C R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
SLIM SERIES CRITICAL GRADE 600C
Style 1 Style 2 Style 3
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
4
Questions?
888-467-5562
APPLICATION
Engineered to provide a high degree of
attenuation in a low, space-saving design.
Features compressed thermal/acoustical
fiberglass packed shell.
1” thick packed shell design provides
significant reduction of outer surface temp.
Actual values depend on exhaust temp and ambient conditions.
Ideal for enclosures or restricted areas where
heat is critical.
Typical Attenuation: 34 to 40 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
CRITICAL GRADE OPTIONS All 600C series are all-welded heavy duty carbon
steel.
Available in three options: 600C, 601C, 602C
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 601C SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
601C Dimensions (inches) Part
Number A B C
OAL
1
OAL
2
OAL
3 F G H WT
601C2-04 4 10 26 34 30 26 5 5 9 125
601C2-05 5 10 27 35 31 27 6 6 9 150
601C2-06 6 12 31 39 35 31 6 6 10 225
601C2-08 8 14 43 52 48 44 7 7 11 395
601C2-10 10 16 50 58 54 50 8 8 12 550
601C2-12 12 20 60 68 64 60 9 9 14 780
601C2-14 14 22 63 72 68 64 10 10 15 945
601C2-16 16 24 72 81 77 73 11 11 16 1,305
601C2-18 18 26 82 92 88 84 12 12 17 1,590
601C2-20 20 28 86 96 92 88 14 14 18 1,905
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 6 Slim Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 1 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade C R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
SLIM SERIES CRITICAL GRADE 601C
Style 1 Style 2 Style 3
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
5
Questions?
888-467-5562
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 602C SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered to provide a high degree of
attenuation in a low, space-saving design.
Features compressed thermal/acoustical
fiberglass packed shell.
2” thick packed shell design provides
significant reduction of outer surface temp.
Actual values depend on exhaust temp and ambient conditions.
Ideal for enclosures or restricted areas where
heat loss is extremely critical.
Typical Attenuation: 35 to 42 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
CRITICAL GRADE OPTIONS All 600C series are all-welded heavy duty carbon
steel.
Available in three options: 600C, 601C, 602C
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
602C Dimensions (inches) Part
Number A B C
OAL
1
OAL
2
OAL
3 F G H WT
602C2-04 4 12 28 36 32 28 6 6 10 135
602C2-05 5 12 29 37 33 29 7 7 10 165
602C2-06 6 14 33 41 37 33 7 7 11 245
602C2-08 8 16 45 54 50 46 8 8 12 425
602C2-10 10 18 52 60 56 52 9 9 13 605
602C2-12 12 22 62 70 66 62 10 10 15 850
602C2-14 14 24 65 74 70 66 11 11 16 1,024
602C2-16 16 26 74 83 79 75 12 12 17 1,365
602C2-18 18 28 84 94 90 86 14 14 18 1,750
602C2-20 20 30 88 98 94 90 15 15 19 2,055
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 6 Slim Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 2 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade C R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
SLIM SERIES CRITICAL GRADE 602C
Style 1 Style 2 Style 3
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
6
Questions?
888-467-5562
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 601H SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered for a high degree of attenuation in
a low, space-saving design.
Ideal where ambient noise levels are very low
and/or where size restriction is a critical factor.
Excellent for enclosures or restricted areas
where heat is critical and a high degree of
attenuation is required.
Features compressed thermal/acoustical
fiberglass packed shell.
1” thick packed shell design provides
significant reduction of outer surface temp.
Actual values depend on exhaust temp and ambient conditions.
Typical Attenuation: 37 to 44 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
HOSPITAL GRADE OPTIONS All 600H series are all-welded heavy duty carbon
steel. Available in two options: 601H, 602H
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability. SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 6 Slim Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 1 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade H R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
601H Dimensions (inches) Part
Number A B C
OAL
1
OAL
2
OAL
3 F G H WT
601H2-04 4 10 32 40 36 32 5 5 6.5 185
601H2-05 5 10 34 40 36 32 6 6 6.5 215
601H2-06 6 12 36 44 40 36 6 6 10 275
601H2-08 8 14 50 58 54 50 7 7 11 575
601H2-10 10 16 57 65 61 57 8 8 12 690
601H2-12 12 20 68 76 72 68 9 9 14 1,065
601H2-14 14 22 68 76 72 68 10 10 15 1,220
601H2-16 16 26 73 82 78 74 11 11 17 1,450
601H2-18 18 28 84 94 90 86 13 13 18 1,875
601H2-20 20 32 90 100 96 92 14 14 20 2,220
SLIM SERIES HOSPITAL GRADE 601H
Style 1 Style 2 Style 3
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
7
Questions?
888-467-5562
APPLICATION
Engineered for a high degree of attenuation in
a low, space-saving design.
Ideal where ambient noise levels are very low
and/or where size restriction is a critical factor.
Excellent for enclosures or restricted areas
where heat is extremely critical.
Features compressed thermal/acoustical
fiberglass packed shell.
2” thick packed shell design provides
significant reduction of outer surface temp.
Actual values depend on exhaust temp and ambient conditions.
Typical Attenuation: 39 to 46 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
HOSPITAL GRADE OPTIONS All 600H series are all-welded heavy duty carbon
steel. Available in two options: 601H, 602H
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 602H SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 6 Slim Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 2 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade H R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
602H Dimensions (inches) Part
Number A B C
OAL
1
OAL
2
OAL
3 F G H WT
602H2-04 4 12 34 42 38 34 6 6 10 195
602H2-05 5 12 34 42 38 34 7 7 10 215
602H2-06 6 14 38 46 42 38 7 7 11 295
602H2-08 8 16 52 60 56 52 8 8 12 575
602H2-10 10 18 59 67 63 59 9 9 13 790
602H2-12 12 22 70 78 74 70 10 10 15 1065
602H2-14 14 24 70 78 74 70 11 11 16 1220
602H2-16 16 28 75 84 80 76 12 12 18 1450
602H2-18 18 30 86 96 92 88 14 14 19 1875
602H2-20 20 34 92 102 98 94 15 15 21 2220
SLIM SERIES HOSPITAL GRADE 602H
Style 1 Style 2 Style 3
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
8
Questions?
888-467-5562
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 700R SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered for applications where ambient
noise levels are moderate.
Good for use in enclosures, marine, trailers or
any application where size restriction is a
critical factor and/or where heat loss is not a
critical factor.
Standard finish is high heat black.
Internal unpacked disk silencer.
Typical Attenuation: 19 to 26 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
RESIDENTIAL GRADE OPTIONS
All 700 series silencers feature all-welded heavy
duty carbon steel construction.
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
700R Dimensions (inches) Part
Number
A
Inlet Size
B
Diameter
C
OAL H K WT
700R2-04 4 20 24 7.5 7 84
700R2-05 5 22 26 8 8 98
700R2-06 6 24 28 9 10 116
700R2-08 8 32 36 10 12 191
700R2-10 10 38 42 11 14 260
700R2-12 12 45 49 12 16 397
700R2-14 14 50 54 13 18 510
700R2-16 16 58 62 14 20 615
700R2-18 18 62 66 16 24 767
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 7 Disk Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 0 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade R R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
DISK SERIES RESIDENTIAL GRADE 700R
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
9
Questions?
888-467-5562
APPLICATION
Engineered for applications where ambient
noise levels are moderate.
Good for use in enclosures, marine, trailers or
any application where size restriction is a
critical factor.
Features compressed thermal/acoustical
fiberglass packed shell.
1” thick packed shell design provides significant
reduction of outer surface temp. Actual values depend on exhaust temp and ambient conditions.
Standard finish is high heat black.
Typical Attenuation: 22 to 28 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
RESIDENTIAL GRADE OPTIONS
All 700 series silencers feature all-welded heavy
duty carbon steel construction.
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 701R SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
701R Dimensions (inches) Part
Number
A
Inlet Size
B
Diameter
C
OAL H K WT
701R2-04 4 22 26 7.5 7 96
701R2-05 5 24 28 8 8 116
701R2-06 6 26 30 9.5 11 131
701R2-08 8 34 38 10.5 13 222
701R2-10 10 40 44 11.5 15 310
701R2-12 12 47 51 12.5 17 415
701R2-14 14 52 56 13 19 545
701R2-16 16 60 64 14.5 21 660
701R2-18 18 64 68 15.5 25 820
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 7 Disk Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 1 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade R R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
DISK SERIES RESIDENTIAL GRADE 701R
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
10
APPLICATION
Engineered for applications where ambient
noise levels are low.
Good for use in enclosures, marine, trailers or
any application where size restriction is a
critical factor and/or where heat loss is not a
critical factor.
Internal unpacked disk silencer.
Standard finish is high heat black.
Typical Attenuation: 27 to 31 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
CRITICAL GRADE OPTIONS
All 700 series feature all-welded heavy duty
carbon steel construction. The Critical Grade
700C Line is available in three options: 700C,
701C, 702C
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 700C SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
700C Dimensions (inches) Part
Number
A
Inlet Size
B
Diameter
C
OAL H K WT
700C2-04 4 26 30 7.5 7 102
700C2-05 5 28 32 8 8 139
700C2-06 6 32 36 9 10 176
700C2-08 8 45 49 10 12 332
700C2-10 10 52 56 11 14 481
700C2-12 12 60 64 12 16 662
700C2-14 14 65 69 14 20 800
700C2-16 16 74 78 15 22 1,105
700C2-18 18 84 88 16 24 1,354
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 7 Disk Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 0 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade C R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
DISK SERIES CRITICAL GRADE 700C
Questions?
888-467-5562
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
11
Questions?
888-467-5562
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 701C SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered for applications where ambient
noise levels are low.
Good for use in enclosures, marine, trailers or
any application where size restriction is a
critical factor.
Features compressed thermal/acoustical
fiberglass packed shell.
1” thick packed shell design provides significant
reduction of outer surface temp. Actual values depend on exhaust temp and ambient conditions.
Standard finish is high heat black.
Typical Attenuation: 30 to 34 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
CRITICAL GRADE OPTIONS
All 700 series feature all-welded heavy duty
carbon steel construction. The Critical Grade
700C Line is available in three options: 700C,
701C, 702C
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
701C Dimensions (inches) Part
Number
A
Inlet Size
B
Diameter
C
OAL H K WT
701C2-04 4 26 30 7.5 7 110
701C2-05 5 28 32 8 8 140
701C2-06 6 32 36 9 10 190
701C2-08 8 45 49 10 12 355
701C2-10 10 52 56 11 14 515
701C2-12 12 60 64 12 16 710
701C2-14 14 65 69 14 20 855
701C2-16 16 74 78 15 22 1,180
701C2-18 18 84 88 16 24 1,450
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 7 Disk Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 1 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade C R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
DISK SERIES CRITICAL GRADE 701C
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
12
Questions?
888-467-5562
APPLICATION
Engineered for applications where ambient
noise levels are low.
Good for use in enclosures, marine, trailers or
any application where size restriction is a
critical factor, and/or where heat loss restriction
is extremely critical.
Features compressed thermal/acoustical
fiberglass packed shell.
2” thick packed shell design provides
significant reduction of outer surface temp.
Actual values depend on exhaust temp and ambient conditions.
Standard finish is high heat black.
Typical Attenuation: 32 to 36 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
CRITICAL GRADE OPTIONS
All 700 series feature all-welded heavy duty
carbon steel construction. The Critical Grade
700C Line is available in three options: 700C,
701C, 702C
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
(Style 2)
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 702C SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
702C Dimensions (inches) Part
Number
A
Inlet Size
B
Diameter
C
OAL H K WT
702C2-04 4 28 32 8.5 9 125
702C2-05 5 30 34 9 10 181
702C2-06 6 34 38 10 12 215
702C2-08 8 47 51 11 14 375
702C2-10 10 54 58 12 16 565
702C2-12 12 62 66 13 18 815
702C2-14 14 67 71 15 22 955
702C2-16 16 76 80 16 24 1,310
702C2-18 18 86 90 17 26 1,630
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 7 Disk Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 2 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade C R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
DISK SERIES CRITICAL GRADE 702C
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
13
Questions?
888-467-5562
APPLICATION
Engineered for applications where ambient
noise levels are very low, and a high degree of
attenuation is required.
Good for use in enclosures, marine, trailers, or
any application where size restriction, heat &
attenuation are critical factors.
Features compressed thermal/acoustical
fiberglass packed shell.
1” thick packed shell design provides significant
reduction of outer surface temp. Actual values depend on exhaust temp and ambient conditions.
Standard finish is high heat black.
Typical Attenuation: 33 to 38 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
HOSPITAL GRADE OPTIONS
All 700 series feature all-welded heavy duty
carbon steel construction. The Hospital Grade
700H Line is available in two options: 701H, 702H
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 701H SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
701H Dimensions (inches) Part
Number
A
Inlet Size
B
Diameter
C
OAL H K WT
701H2-04 4 30 34 8 8 146
701H2-05 5 32 36 8.5 9 179
701H2-06 6 36 40 9 10 235
701H2-08 8 50 54 10 12 492
701H2-10 10 58 60 11 14 575
701H2-12 12 70 74 12 16 908
701H2-14 14 72 76 15 22 1,039
701H2-16 16 74 78 17 26 1,138
701H2-18 18 84 88 18 28 1,597
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 7 Disk Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 1 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade H R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
DISK SERIES HOSPITAL GRADE 701H
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
14
Questions?
888-467-5562
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 702H SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered for applications where ambient
noise levels are very low, and a high degree of
attenuation is required.
Good for use in enclosures, marine, trailers, or
any application where size restriction is a
critical factor, and/or where heat loss restriction
is extremely critical.
Features compressed thermal/acoustical
fiberglass packed shell.
2” thick packed shell design provides significant
reduction of outer surface temp. Actual values depend on exhaust temp and ambient conditions.
Standard finish is high heat black.
Typical Attenuation: 32 to 34 dB’A’
ADDITIONAL OPTIONS
Available with mounting brackets. (See schema
below)
Leak testing – per request, fee applicable
Stainless steel *
HOSPITAL GRADE OPTIONS
All 700 series feature all-welded heavy duty
carbon steel construction. The Hospital Grade
700H Line is available in two options: 701H, 702H
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
Flush Mount
Option
Flush mount inlet good for
applications where space is
extremely limited. *
Options Flanged connections can be
replaced with ID cuff, OD
tube, NPTM, etc. *
*Consult factory for price and availability.
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 7 Disk Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Packing 2 0 (No packing), 1 (1” Packing), 2 (2” Packing)
Grade H R (Residential), C (Critical), H (Hospital)
Style 1 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
Brackets N N (No brackets), T (Top brackets), B (Bottom brackets)
702H Dimensions (inches) Part
Number
A
Inlet Size
B
Diameter
C
OAL H K WT
702H2-04 4 32 36 9 10 170
702H2-05 5 34 38 9.5 11 205
702H2-06 6 38 42 10 12 276
702H2-08 8 52 56 11 14 550
702H2-10 10 60 64 12 16 756
702H2-12 12 72 76 13 18 1,005
702H2-14 14 74 78 16 24 1,144
702H2-16 16 76 80 18 28 1,364
702H2-18 18 86 90 19 30 1,755
DISK SERIES HOSPITAL GRADE 702H
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
15
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 900I SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered for Critical or industrial areas
where ambient noise levels are high.
May be installed in any position.
Standard finish is high heat black.
Typical Attenuation: 14 to 20 dB’A’
ADDITIONAL OPTIONS
Leak testing – per request, fee applicable
Stainless steel *
INDUSTRIAL GRADE OPTIONS
All welded heavy-duty steel construction
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
Options Flanged connections can
be replaced with ID cuff,
OD tube, NPTM, etc. *
*Consult factory for price and availability.
900I Dimensions (inches) Part
Number A B C
OAL 1
D
OAL 2
E
OAL 3 F G H WT
900I2-04 4 10 36 33 30 5 5 8 24
900I2-05 5 12 42 39 36 5 5 9 27
900I2-06 6 14 42 39 36 6 6 10 35
900I2-08 8 18 49 45 42 8 8 13 110
900I2-10 10 24 62 59 56 12 12 16 164
900I2-12 12 26 63 59 56 13 13 17 259
900I2-14 14 30 76 73 70 15 15 19 346
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 9 Cylindrical Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Other 0 0 (Standard), T (Turbo), I (Intake)
Grade I I (Industrial), R (Residential), C (Critical), H (Hospital)
Style 1 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
CYLINDRICAL SERIES INDUSTRIAL GRADE 900I
Questions?
888-467-5562
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
16
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 900R SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered for areas where ambient noise
levels are moderate.
Good for use on stationary, mobile and
marine power units.
May be installed in any position.
Standard finish is high heat black.
Heavy-duty steel construction.
Typical Attenuation: 19 to 25 dB’A’
ADDITIONAL OPTIONS
Stainless steel *
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
Options Flanged connections can
be replaced with ID cuff,
OD tube, NPTM, etc. *
*Consult factory for price and availability.
900R Dimensions (inches) Part
Number A B C
OAL 1
D
OAL 2
E
OAL 3 F G H WT
900R2-04 4 10 46 43 40 5 5 8 29
900R2-05 5 12 54 51 48 6 6 9 34
900R2-06 6 14 54 51 48 6 6 10 43
900R2-08 8 18 61 57 54 8 8 13 124
900R2-10 10 24 74 71 67 12 12 16 182
900R2-12 12 26 75 72 69 13 13 17 299
900R2-14 14 30 100 92 94 15 15 19 413
900R2-16 16 36 114 111 109 17 17 22 585
900R2-18 18 36 126 123 119 18 18 22 733
900R2-20 20 42 139 136 133 20 20 25 1,013
900R2-22 22 48 141 138 136 22 22 29 1,192
900R2-24 24 54 142 139 137 24 24 31 1,404
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 9 Cylindrical Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Other 0 0 (Standard), T (Turbo), I (Intake)
Grade I I (Industrial), R (Residential), C (Critical), H (Hospital)
Style 1 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
CYLINDRICAL SERIES RESIDENTIAL GRADE 900R
Questions?
888-467-5562
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
17
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 900C SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered for areas where ambient noise
levels are very low and a high degree of
silencing is required.
Suited for heavy duty stationary, mobile and
marine applications in both Critical and
residential.
Heavy duty steel construction.
May be installed in any position.
Standard finish is high heat black.
Typical Attenuation: 25 to 33 dB’A’
ADDITIONAL OPTIONS
Stainless steel *
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
Options Flanged connections can
be replaced with ID cuff,
OD tube, NPTM, etc. *
*Consult factory for price and availability.
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 9 Cylindrical Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Other 0 0 (Standard), T (Turbo), I (Intake)
Grade C I (Industrial), R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
900C Dimensions (inches) Part
Number A B C
OAL 1
D
OAL 2
E
OAL 3 F G H WT
900C2-04 4 14 54 51 48 6 6 10 66
900C2-05 5 16 61 57 53 7 7 11 92
900C2-06 6 18 74 70 66 8 8 12 175
900C2-08 8 24 75 71 67 10 10 16 215
900C2-10 10 26 100 96 93 11 11 17 360
900C2-12 12 30 102 99 95 13 13 19 615
900C2-14 14 36 138 133 130 15 15 22 940
900C2-16 16 42 140 137 133 17 17 25 1,130
900C2-18 18 42 141 138 134 18 18 25 1,273
900C2-20 20 48 165 162 159 20 20 28 1,660
900C2-22 22 54 166 163 161 22 22 31 2,010
900C2-24 24 60 169 166 164 24 24 34 2,775
CYLINDRICAL SERIES CRITICAL GRADE 900C
Questions?
888-467-5562
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
18
INSER
TIO
N L
OSS I
N D
EC
IBELS
(Ref. 0
.0002 M
icro
bars
)
TYPICAL ATTENUATION CURVE 900H SERIES SILENCER
OCTAVE BAND
CENTER FREQUENCY, Hz
APPLICATION
Engineered to provide a premium level of
performance where ambient noise levels are
very low and optimal attenuation is
mandatory.
Suited for stationary, marine and mobile
power applications where noise attenuation
is critical.
Heavy duty steel construction.
May be installed in any position.
Standard finish is high heat black.
Internal fiberglass acoustical/thermal
insulation.
Typical Attenuation: 23 to 40 dB’A’
ADDITIONAL OPTIONS
Stainless steel *
CONNECTION OPTIONS
Standard
Connections
125/150# ANSI Pattern
flanged inlet and outlet.
Side inlet, end outlet.
Options Flanged connections can
be replaced with ID cuff,
OD tube, NPTM, etc. *
*Consult factory for price and availability.
900H Dimensions (inches) Part
Number A B C
OAL 1
D
OAL 2
E
OAL 3 F G H WT
900H2-04 4 16 60 56 52 8 8 12 170
900H2-05 5 18 74 58 54 10 10 13 188
900H2-06 6 20 76 72 68 10 10 14 240
900H2-08 8 26 96 94 90 10 10 17 385
900H2-10 10 30 112 108 104 12 12 19 605
900H2-12 12 36 128 124 120 14 14 22 949
900H2-14 14 42 148 144 140 16 16 25 1,375
900H2-16 16 42 164 160 156 18 18 25 2,010
900H2-18 18 48 177 173 169 20 20 29 2,136
900H2-20 20 54 179 175 171 22 22 32 3,340
900H2-22 22 60 205 201 197 24 24 35 3,785
900H2-24 24 62 205 201 197 26 26 36 3,985
SCHEMA EXAMPLE AVAILABLE OPTIONS
Family/Series 9 Cylindrical Silencer
Inlet(s) 0 0 (Single inlet), 2 (Dual inlets)
Other 0 0 (Standard), T (Turbo), I (Intake)
Grade H I (Industrial), R (Residential), C (Critical), H (Hospital)
Style 2 1 (End in/end out), 2 (Side in/end out),
3 (Side in/side out)
Nominal Size 04 Size in inches. Ex: 04 = 4 inches
CYLINDRICAL SERIES HOSPITAL GRADE 900H
Questions?
888-467-5562
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
19
TERMS AND CONDITIONS Please review quotation/order when received to ensure accuracy on agreed price and lead time
Multiple parts and/or large quantity parts may extend lead times
Custom parts that are quoted and then ordered are non-refundable, non-restockable, and non-returnable
Freight is F.O.B. Lincoln
Minimum order $50
Delivery from the Company is defined as the date/time the Equipment leaves the Company’s Shipping Dock.
Innovative Exhaust Solutions, Inc. provides two options for Shipping Terms. By default, the Company shall choose
Option 1 unless directed by the Customer or otherwise specified.
Option 1: Shipment is FOB (Free On Board) Factory, Freight Prepaid & Add
a) The Company pays and invoices Customer for freight charges
b) The Customer assumes the title and control of the Equipment at the moment the carrier signs the Bill of
Lading
c) The Company reserves the right to select the freight carrier
d) The Company is responsible for filing and settling claims for loss or damage of Equipment
Option 2: Shipment is FOB (Free On Board) Origin Freight Collect.
a) The Customer pays and bears the freight charges
b) The Customer assumes title and control of the Equipment at the moment the Carrier signs the Bill of Lading
c) The Customer is responsible for filing and settling claims for loss or damage of Equipment
All drawings and documents furnished to Customer by the Company is the work product of the Company who
shall be deemed the author and shall retain all common law, statutory law and other rights of ownership,
including copyrights. Customer may make and retain copies for informational purposes only.
The Company will endeavor to make shipment of orders as scheduled whenever possible. However, all
shipment dates are approximate only, and the Company reserves the right to adjust shipment schedules at its
sole discretion.
UNDER NO CIRCUMSTANCES WILL THE COMPANY BE RESPONSIBLE OR INCUR ANY LIABILITY FOR COSTS OR
DAMAGES OF ANY NATURE (WHETHER GENERAL, CONSEQUENTIAL, AS A PENALTY OR LIQUIDATED
DAMAGES, OR OTHERWISE) ARISING OUT OF OR OWING TO ANY DELAYS IN DELIVERY.
When the Equipment is ready for shipment and shipment is delayed or postponed through any causes, or at
Customer’s request, the Customer shall:
a) pay the Company’s invoice for the Equipment as per payment terms,
b) arrange for storage of the Equipment covered by this Agreement other than at the Company’s facility, unless
by separate written agreement the Company shall agree to store the Equipment and the charges for such
storage.
The Company warrants to the Customer that it will repair or replace at inExhaust’s option, any Equipment, or
parts of Equipment, which, in the Company’s judgment is defective in material or workmanship for a period of
one (1) year after the date of shipment from the Company’s facility.
Equipment, accessories and other parts and components not manufactured by the Company are warranted only
to the extent of and by the original manufacturer’s warranty to the Company, and in no event shall such other
manufacturer’s warranty create any more extensive obligations of the Company to the Customer than the
Company’s warranty covering Equipment manufactured by the Company.
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
20
PRODUCT WARRANTY
inExhaust™ warrants to the Purchaser that it will repair or replace at inExhaust™ option, any Equipment, or parts of
Equipment, which, in the Company’s judgment is defective in material or workmanship for a period of one (1) year
after the date of shipment from the Company’s facility.
Defects or failure due to improper or careless installation, storage, handling, non-manufacturing welding or
application shall be excluded from this warranty.
Equipment, accessories and other parts and components not manufactured by inExhaust™ are warranted only to the
extent of and by the original manufacturer’s warranty to the Company, and in no event shall such other
manufacturer’s warranty create any more extensive obligations of the Company to the Purchaser than the Company’s
warranty covering Equipment manufactured by the Company.
SHIPPING: inExhaust™ will endeavor to make shipment of orders as scheduled. However, all shipment dates are
approximate only, and the Company reserves the right to adjust shipment schedules at its sole discretion.
No liability is accepted for return transportation charges, following the repair or replacement, or for reinstallation
cost. No other expressed or implied warranties exist in the absence of special written agreement between the
consumer and inExhaust™.
Under no circumstances will the company be responsible or incur any liability for costs or damages of any nature
(whether general, consequential, as a penalty or liquidated damages, or otherwise) arising out of or owing to any
delays in delivery.
THE COMPANY SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, DELAY OR CONSEQUENTIAL
DAMAGES, OR FOR LOSS, DAMAGE OR EXPENSE, DIRECTLY OR INDIRECTLY ARISING FROM THE USE OF THE
EQUIPMENT, SPARE OR REPLACEMENT PARTS, OR FROM ANY OTHER CAUSE WHETHER BASED ON WARRANTY
(EXPRESSED OR IMPLIED) OR TORT OR CONTRACT AND THE COMPANY’S TOTAL LIABILITY SHALL NOT EXCEED THE
PURCHASE PRICE, regardless of any advices or recommendations that may have been rendered concerning the
purchase, installation or use of the Equipment.
Special items are not returnable or refundable. All items are standard sizing. Call factory for pricing on non-standard items.
All weights are approximate and in pounds. All dimensions are in inches. Contents subject to change without notice. Minimum order amount $50.
www.inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]
©2017 Innovative Exhaust Solutions, Inc. Lincoln, NE USA
Unauthorized reproduction in full or part is strictly prohibited. | Rev040717-A
21
©2017 Innovative Exhaust Solutions, Inc.
“Are YOU ready to be part of the Solution?”
4010 NW 39th St
Lincoln, NE 68524
www. inExhaust.com | 402-322-7022 | 888-467-5562 | [email protected]