Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Index
Leaflet Catalogue Information Technical Drawings
Web LInks
Signature SE Information Page
Ask a question / Send us an enquiry
Information about B&R
Local Sales Team Phone Numbers
Australian Made
Australian Owned
signature se Low Voltage switchboards & Motor Control Centres
signature se
Australian Made
Australian Owned
Features
• IP43 & IP55 protection rating
• 10 drive module sizes
• Up to 12 drive modules per tier
• Generous bus and cable zones
• Structural skin allows open space for internal fitout
• Unique hinging system built into shelves
• Fault rating up to 100kA for 1 second & 65kA for 3 seconds
• Current rating from 600 to 3400 Amps (4000 Amps incomer)
• Impulse voltage withstand up to 16kV
OVerVIeW
The Signature SE offers a type tested certified solution for any commercial or industrial electrical installation.Whether you need fixed, demountable or fully withdrawable modules, the Signature SE provides quality and performance. It has been designed with minimum number of sheet components to make the final assembly of busbars and electrical equipment easy.
InCLusIOns
door rail Lock Mounting Pan
APPLICAtIOn
Typically used in commercial or industrial electrical installation.
MAterIALs
• Body – Zinc coated steel• Body thickness – 1.6 / 1.5mm• Gasket – FIP polyurethane• Surface finish: Powdercoated
signature se
signature se
Queensland P +61 7 3714 1000 Townsville P +61 7 4775 6255 Sydney P +61 2 8867 7688 Newcastle P +61 2 4961 4433 Victoria P +61 3 8588 8400 South Australia P +61 8 8417 6200
Western Australia P +61 8 9248 9744 Tasmania P +61 3 6331 5545 Northern Territory P +61 8 8947 0870
[email protected] brenclosures.com.au
busbAr
signature se
Withstand Current
Main Busbar (Amps) Vertical Busbar (Amps)
700 1250 1400 2000 2500 3200 3400 (Incomer)
4000 460 700 800 1000
50kA 1 second • •
50kA 3 second •65kA ½ second •65kA 1 second • • • • •65kA 3 second • • •80kA 1 second • • • • •No of Busbars 1 1 2 2 3 3 4 4 1 1 1 1Busbar Height (mm) 30 80 30 80 80 100 80 100 40 50 63 80Busbar Width (mm) 10 10 10 10 10 10 10 10 6.3 6.3 6.3 6.3
ArC FAuLt COntAInMent
• The Signature SE form 3b and form 4 range of low voltage switchgear and control gear assemblies have been extensively type tested by Testing and Certification Australia to comply with the requirements of AS/NZS3439.1 1993 APP EE and AS/NZS3439.1 2002 Annex ZD.
• This is your guarantee of operator safety in the unlikely event of an internal arcing fault occurring during operation.
• The standard Signature SE product incorporates modules that are vented in the left hand side to allow ionised gases to expand during arcing. Ionised gases through a hinged cover in the roof of the MCC are vented by a vertical chimmney.
• B&R has conducted a wide variety of internal arcing fault type tests on fuse protected circuits as well as MCCB protected circuits and motor starters. These type tests have been conducted by Testing and Certification Australia, and prove the integrity of the Signature SE enclosure system under the most extreme fault conditions.
Technical Drawings
PLAN VIEW ROOF DETAIL
BUSBAR ACCESS PANEL GLAND PLATE HINGED ARC FAULT VENT
TYPICAL MCC TIERS
560 820 920 360 820 1080
2305
1800 SIZE 10
CABLE ZONE CABLE ZONE CABLE ZONE CABLE ZONE CABLE ZONE
SIZE 8 SIZE 1.5 SIZE 6
SIZE 12
SIZE 2.5
SIZE 2
SIZE 3
SIZE 4
SIZE 5
BUSBAR/CABLE ZONE
BUSBAR/CABLE ZONE
BUSBAR/CABLE ZONE
BUSBAR/CABLE ZONE
INSTRUMENT ANDCONTROL PANEL
ACB MODULEUP TO 4000 AMPS
EQUIPMENTMOUNTING AREA
EQUIPMENTMOUNTING AREA
CABLE CONNECTION
BUSBAR/CABLE ZONE
CABLEZONE
CABLEZONE
BUSBARTIER
800
STANDARD DOUBLE FRONTED TIER CONFIGURATIONS
SET 58FORM 3/4 MCC
SET38BUSBAR
TRANSITION
SET88ACB INCOMER/FEEDER
SET108DOUBLE DOOR MARSHALLING,
PLC, LARGE STARTER
SET 88FORM 3/4 MCC
300 mm CABLE ZONE
SET 98FORM 3/4 MCC
400 mm CABLE ZONE
600
CABLE ZONE EQUIPMENT MODULE BUSBAR ZONE
STANDARD SINGLE FRONTED TIER CONFIGURATIONS
SET 58FORM 3/4 MCC
SET38BUSBAR
TRANSITION
SET88ACB INCOMER/FEEDER
SET108DOUBLE DOOR MARSHALLING,
PLC, LARGE STARTER
SET 88FORM 3/4 MCC
300 mm CABLE ZONE
SET 98FORM 3/4 MCC
400 mm CABLE ZONE
signature se