Upload
others
View
15
Download
0
Embed Size (px)
Citation preview
SignageStandards Manual for Exterior & Interior
�1
Purpose/Scope of Work !The purpose of the Signage Guidelines for East Tennessee Children’s Hospital is to consolidate the design, fabrication, and installation of signage throughout the properties. This is intended to meet the particular needs of the healthcare system while maintaining an overall design cohesion throughout. Adherence to the standards of this document and official East Tennessee Children’s Hospital policies and procedures for control of campus signage will ensure consistency throughout. This document will be the primary reference for those ordering, producing, and implementing the facilities’ signage and graphics program. Signage addressed in this document includes: All exterior and interior directional, identification, and informational / regulatory signs for visitors, patients, and guests. This document is meant to cover all East Tennessee Children’s Hospital owned, leased, or managed facilities. !To be successful, a signage program must allow for flexibility. Exceptions and additions to any of East Tennessee Children’s Hospital guidelines listed within this document will be reviewed and added on a case by case basis, as deemed necessary. It is the intention that this document will be an evolving tool for use by East Tennessee Children’s Hospital and Innerface to monitor and track signage throughoutthe properties. !Purpose/Scope of Work !All departments and associates should contact the (TO BE DETERMINED) assigned to the facility or project for any and all sign requests. For facilities that are leased and/or managed by East Tennessee Children’s Hospital sign requests should be handled through the (TO BE DETERMINED). In addition to the rules and regulations noted in this document the following will also apply: !- In the event that a permanent sign can not be procured in time, all temporary signs must mimic the
new sign standards as noted in this document. This includes the signs look, feel, font, graphics, color, etc. All temporary signs should be coordinated through Innerface Architectural Signage. !
- There should never be any paper signs posted in, around, and throughout the facilities, both in associate areas and patient care areas. This includes any 8.5x11 computer printouts, temporary postings, event advertisements, etc. In the event that a paper sign is found it will be asked to be removed and disposed of immediately. !
- No tape, stickers, adhesive materials, or permanent markers should be used on or applied to any existing or new sign. These can and will damage the face of the sign. If a sign becomes obsolete in message or function please see above directions for replacement.
Introduction
�2
Codes and Standards - Exterior !The sign types shown on the following pages contains appropriate standards of size, height, and proportionality for a legible signage system. However, all sign types may need to conform to specific municipal requirements. Zoning standards and allowances may vary considerably across the range of East Tennessee Children’s Hospital properties, and any additions or replacements of exterior signs, whether individual or comprehensive, must follow those requirements. The range of available sign sizes is intended to address this, but limitations exist on allowed quantity of signs on an individual site and their total aggregate square footage. !Additionally, the scope of governance is not consistent; many communities govern only those signs that are visible from public right of way, while others review and approve every onsite exterior sign. To avoid any confusion, ask first - any questions can be addressed either by Innerface or the appropriate municipal governing body. !Codes and Standards - Interior !All public healthcare facilities are required to follow various codes and guidelines affecting many aspects of their environment. These include everything from fire safety to air quality and building materials, as well as codes that regulate signage and wayfinding. The following list of entities regulating signage have been compiled below. This should not be considered a complete list, but a tool to be used for reference. !ADA - Americans with Disabilities Act ANSI - American National Standards Institute ASTM - American Society for Testing and Materials CABO - Council of American Building Officials CSI - Construction Specification Institute IBC - International Building Code LSC - Life Safety Code (written by NFPA) NEC - National Electrical Code (written by NFPA) NFPA - National Fire Protection Association SBCCI - Standard Building Code UBC - Uniform Building Code f
Introduction
�3
Typography - Acceptable Typestyles !All interior sign text shall be specified using the Lucia Sans font family. The main body of signs shall use Lucia Sans at standard kerning unless otherwise specified. Lucia Sans is to be used for all ADA required raised characters, and Lucia Sans is to be used for all tertiary messages such as donor recognition and/or supplemental information. Lucia Sans is to be used for all exterior applications for directional, identification, and informational signage. This font is also to be used for all exterior dimensional letter sets. Graphic representation of these typefaces are identified below: !Exterior: Lucida Sans Family (Demi-Bold, Regular, Italic) !abcdefghijklmopqrstuvwxyz ABCDEFGHIJKLMOPQRSTUVWXYZ 1234567890 !@#$%^&*(),./: !Interior: Lucida Sans Family (Demi-Bold, Regular, Italic) !abcdefghijklmopqrstuvwxyz ABCDEFGHIJKLMOPQRSTUVWXYZ 1234567890 !@#$%^&*(),./: !Typography Restrictions: !Only the typefaces and weights described above shall be used in the signage system. Modification of letter shapes is not recommended unless specified in individual sign type drawings. Condensed, extended, slanted, outlined or otherwise distorted type is not recommended. Recommendations to use alternate type weights should be reviewed by a graphics specialist.
Graphic Standards
�4
Typography - Capitalization !Aside from special message emphasis and certain regulatory signs, all messages shall be initial uppercase followed by lowercase with the exceptions of articles, prepositions, and conjunctions. An exception will be when the word “EMERGENCY” is used on both directional and entry identification signage. In every application identifying emergency care access, the word will always be upper case. In the case of lengthy messages, words will be written in sentence format with initial uppercase of the first word followed by all lowercase letters, ending in a period. For increased legibility, lower case letters should have a lowercase “x” height of 66% of the height of the uppercase letter. !Typography - Word Spacing !Word spacing between related words is normally 75% of the letter height. For example, a message using 4” height letters will have 3” between words.
Graphic Standards
Typography - Line Spacing !Line spacing shall be 50% of the letter height for words of a related message. Spacing between unrelated message lines shall typically be 100% of the letter height.
2”
Patient DropOf f / Pick UpParking unrelated
message
2”
1” relatedmessages
Typography - Letter Spacing !All messages shall have standard kerning, unless specified in the sign type drawings. Deviating from the above (i.e. letter or word spacing to fit a lengthy message within a small area) is not recommended.
Nurse Manager3”
4”
�5
Symbology - Symbols !The symbols (pictograms) shown below shall be used to reinforce and provide visual confirmation of messages when specified in the sign type drawings. These symbols are gathered from those developed by the Department of Transportation (DOT), the American Institute of Graphic Arts (AIGA), and Society of Environmental Graphic Design (SEGD). These symbols are in broad use around the world, as they are readily identified by the international public for both English and non-English speakers. Symbols play a critical role in vehicular signage; because of their brevity and high level of public recognition, they should be employed wherever necessary to ensure site safety.
Graphic Standards
G9G8G6G5G4G3G2
G14G12G11 G18G17G16G15
G19 G26G25G24G23G22G20
G28G27 G35G34G32G30G29
G42G41G40G39G38G37G36
G50AG49G48G46G45 G51G50B
G70G61G58G56G55G54G53
�6
Symbology - Symbols !Continued.
Graphic Standards
F7F6F5F4F3F2F1
A3A2A1
M41M40M39M38M37M36M35
M33M32M31M30M29M28
M26M25M24M23M22BM22A
M15 M16 M17 M18 M19 M20
M34
M27
M21
M14M13M12M11M10M9M8
M7M6M5M4M3M2M1
�7
Arrow Standards !Arrow Standards Arrows used as directional icons are more readily identified and require less sign real estate than messages. Arrow graphics take less time to comprehend than the message equivalent, allowing people to understand the information being conveyed more quickly. !Consistent arrow graphic proportions should always be applied in the same manner across the entire signage system. The angle of orientation and directional information that arrows convey is of equal importance as the use of a consistent arrow form. !1. Orientation Angles !When used for interior signage and wayfinding, the standard arrow can be used in eight (8) different angled orientations. No alternate angles or forms should be used. On exterior signs, usage is more limited due to the critical need for clarity.
Graphic Standards
2. Arrow Applications !Straight-ahead movement should be indicated by upward-facing arrows, unless the direction being specified is “straight down” in the instance of a stairwell for interior signs, or above a garage entry for exterior signage. Straight downward-facing arrows are normally reserved to indicate movement to a lower level of pedestrian traffic, and are not generally used for vehicular signs. Angled, downward facing arrows are also avoided on non-overhead exterior signs, unless specific variations in grade create a special circumstance requiring their use.
�8
3. Arrow Face Layout Locations !All arrows must be placed to the left of the message on direction giving signs. Arrow is to be proportionally larger than copy capheight by 120%. Message is always to be left justified. Distance between arrow and message is half the width of the arrow form. Each line of direction giving messaging is to have an arrow. Minimum distance from base line to baseline of two lines of messaging is the capheight point size + 10 points. !The ultimate goal is to create a quicker legibility cycle for the messages.
Graphic Standards
When EMERGENCY is a destination to be included in a listing, it is always the first/top listing. Messaging to always be grouped/listed according to the specific arrow direction. Within each listing group, destinations are to be prioritized by the order in which they are encountered, within the given environment.
Parking
Main Entrance
�9
Color Standards !It is important to note that many studies have been preformed regarding colors and their effects on human behavior. Considerations must be made with multi-colored sign systems, particularly with complex facilities and garage structures. Approximately 12 percent of the male population is color-blind and cannot distinguish between shades of black and blue, yellow and brown, or red and orange. For this reason, if multiple colors are used it may be necessary to spell out the name of the color on the sign to make it clear to many of these individuals if color is being used as a primary wayfinding tool. For example, levels or areas of a parking garage can be assigned differing colors; the color will help to trigger the user's memory when retrieving his/her vehicle, but is not required to understand how the facility is organized. !Healthcare facilities have specific associations to manage in a signage system. Color-blindness notwithstanding, red is historically associated with emergency services, and is used on the directional signs for both emphasis and distinction. Exterior signs need to be seen at night and under inclement conditions, so figure-background contrast and illumination characteristics must be used in evaluating color choices. !The primary goal of colors for signage systems to create a supplemental scheme that enhances the messaging. In addition, the intention is to specify colors that are distinctive and clearly identifiable. The recommended colors must be used throughout the entire system in order to maintain consistency. !The recommended color standards are noted below:
Graphic Standards
Sky BluePantone 2985
ETCH BluePantone 301
Lime GreenPantone 7487
Gold/YellowPantone 1235
GreenPantone 363
PurplePantone 2685
Black
RedPantone 185
White
�10
Terminology !Terminology, as it applies to healthcare signage and wayfinding systems, is a standardized way of using words, syntax, grammar, spelling, and symbols to communicate information to the user of the facility. Nomenclature systems ensure that information is presented consistently, and that the content of the information is always clear and concise. The following is a sample listing of common healthcare terms. The terminology listed here should always be specified exactly as stated and should not deviate in any way.
Graphic Standards
Global Naming
Tactile Room Sign Tactile Room # w/Insert
Office Nurse Manager (Title Only, No Names)
Facilities Restroom Men Women Staff Only
Maintenance EVS
Supplies Soiled Utility Clean Supply
Staff Areas Physician Lounge Nurse Lounge Staff Lockers
Communication Room Data / Com
Electrical Room Electrical
Mechanical Room Mechanical
Medication Room Staff Only
Private Consultation Consultation
Nourishment Nourishment
Stairs A, B, C or 1, 2, 3
Entry Area
Main Lobby Main Lobby
Front Desk Information
Registration Registration
Elevators Staff Elevators Visitor Elevators Patient Elevators Patient Elevators
Cahier Cashier
Gift Shop Gift Shop (Branded Name as Applicable)
Emergency
Department Name EMERGENCY
Patient Rooms Exam R oom XX Trauma X-XX
Room Numbering Room #s XXXX-XXXX
Waiting Area ER Waiting
Decontamination Decon
Additional
Cafeteria Cafeteria (for directional) (Branded Name -as applicable)
Conference Center Conference Room
Training, Education Education Department Classroom XX
Receiving Receiving
Pharmacy Staff Only
Administration Administration
Oncology Oncology
Behavioral Health Behavioral Health
ICU Intensive Care Unit (ICU)
Rehabilitation Rehab
�11
Message Hierarchy !This section delineates a hierarchy of messages and information to be used throughout the signage system. By using the terminology in this document, one should be able to organize and specify messages into their appropriate sign types. Exterior signs have very limited opportunities to communicate. Clear and concise sign messages are presented most effectively by reducing the quantity of terms, ensuring a more efficient comprehension of the sign. Primary and secondary messages should hold the most visual weight of the sign graphics. Tertiary messages must be coordinated with primary and secondary messages to prevent overloading the sign with information. !Primary Messages: This information shall be the largest and most visible information on each sign. These are the primary destinations of each campus or care site. !Secondary Messages: This information supplements or reinforces information already conveyed by the primary messages. Examples are secondary or non-public destinations, supplemental parking, and outlying buildings. !Tertiary Messages: Tertiary information supplements both the primary and secondary messages. It should rarely occur on exterior signs, and never on vehicular directional signs.
Graphic Standards
�12
Sign Type Family & Legibility !The most efficient and timesaving way for designing a signage system is to first establish a sign type family. The sign type family is the catalog of all directional, identification, and informational / regulatory signage applications. It functions as a tool for ordering, producing, and replacing signs. A typical sign family includes: !- Multiple size and placement options for all sign types. All currently known conditions campus-wide,
addressed with various mounting options. For example, identity signs may require applications for interior & exterior conditions, ceiling mounted, size adjustments, or location modifications due to architectural details.
- Document specifications for signage includes sizing, fonts, colors, symbols (if necessary), and materials, as well as fabrication and installation requirements. !
Legibility is another important factor in the process of creating an effective signage system. Legibility is defined as the recognition of various elements that make a message or symbol understandable. Additional factors that may affect legibility include size, placement, lighting, contrast, and viewing angle. !It is necessary to have consistent placement and presentation of messaging on signs that are viewable to vehicular or pedestrian traffic. This includes the sign's height above grade, and the overall size of the sign, including its support structure. This will minimize misinterpretation of the intended direction and uses of the facility. The sign location and surroundings will determine the range of visibility for the viewer to interpret the information. If the viewer is given the appropriate distance to comprehend the messages, they will be able to make a decision to change direction, or stay on the same pathway. It is also necessary to create a consistent size for text and symbols throughout the facility campus. This will create a repetitive display of information which, in turn, will make interpretation and comprehension much easier.
Sign Type Overview
�13
Legibility (continued) !The following criteria and principles shall be applied to the design of traffic signs to convey messages adequately to the driver: !- Signs shall be easy to detect or attract the driver's attention. The most important information needed
by most drivers, requiring the most immediate decision, shall be emphasized. - Signs shall be legible under all conditions including day, night, and inclement weather. - Simple verbal messages and symbols are more legible than complex ones. The message shall be clearly
presented, with no sources of misinterpretation and ambiguity. The message shall not depend on a high order of logical deduction for its comprehension.
- Legend and location shall conform to the driver's expectation based on pre-trip planning or previously obtained information, signs seen earlier, and subjective evaluation of the driving situation.
- Each type of information shall be ranked for its importance to the driver, and this hierarchy shall be expressed in the use of color, size, shape, message, and in rules governing location.
- The system shall prepare the driver in advance for turning and upcoming road and traffic conditions. Sign location shall allow adequate time to act on the information.
- Signs shall be installed only where the information is needed. Overuse of signs results in mistrust. - The use of all codes and forms of message content shall be uniform throughout the system. !An item of information is defined as being a symbol, word, syllable or discontinuous shape. As a maximum, no more than six items of information shall be used to direct a driver in finding what he or she is seeking. No more than ten items of information shall be communicated from a property to an adjacent right-of-way by any one sign. Field tests indicate that the reaction time allowing for a driver to see a sign, read it, and respond, shall be related to the number of lanes as follows.
Sign Type Overview
2 lane road = 8 seconds 4 lane road = 10 seconds6 lane road = 11 seconds Freeway = 12 seconds
Speed(MPH)
ReactionTime
(Seconds)
Distance TraveledDuring Reaction
(Feet)
Letter Height(Inches)
Commercial /Industrial
Institutional /Residential
Number ofLanes
Total Areas Of Sign (Sq. Ft.)
1530455515304555
8
10
2
4
176352528704220440660880
61836706
2864
106
82550
1008
4090
150
47
101449
1317
�14
Legibility (continued) !Minimum viewing distance shall be affected by horizontal and vertical viewing angles. It is recommended that advance guide (directional) signs be spaced at least 800 feet apart, however that distance shall be lowered to 650 feet as speeds are reduced. !The legibility formula for determining letter height on roadway signs is as follows: !Exterior signs reference: !H=(N+6)V + S 100 10 !H=Height of letters in inches N=Number of Messages V=Vehicle Speed in miles per hour S=Lateral Distance from driver's path !Example: If a vehicle is traveling at 25 MPH and the sign is 15'-0” (lateral distance) from the driver's path, the letter height on the sign shall be calculated using the following formula: !H=(6+6) 25 (MPH) + 15 (Lateral Distance) 100 10 !H = 3 + 1.5 !H = 4.5 inches
Sign Type Overview
�15
Location & Mounting Guidelines - Exterior !Viewer circulation patterns and natural lines of vision are the basis for determining the location of all signs. Signs shall be located to precede decision points to ensure sufficient time for vehicles to react to each sign message.
Sign Type Overview
CIRCULATION PATH SIGN LOCATION ARROW DESIGNATION
Straight Ahead
Straight Ahead on the Right
Straight Ahead on the Left
Right
Left
�16
Location & Mounting Guidelines - Interior !Viewer circulation patterns, natural lines of vision, and ADA requirements are the basis for determining the location of interior signs. Ideally, signs shall be located in the line of vision of the viewer, perpendicular to the flow of traffic. This will ensure sufficient time for users to react to each sign message.
Sign Type Overview
CIRCULATION PATH DECISION POINT SIGN LOCATION
�17
Location & Mounting Requirements - Interior !Mounting Heights (Character Height). Minimum character height for ceiling or projecting wall mounted directional or informational signage is 2”, provided that the sign is mounted no more than 10’ high from the floor or ground surface. !5/8” minimum character height for all signs mounted between 40” and 70” from the floor or ground surface. This applies to all identification, informational, and directional signs. The 5/8” minimum does not apply to such regulatory signs as EMTALA, patients rights & responsibilities, marketing notices, etc. For specific instances, always contact the ADA hotline for clarification prior to manufacturing. !No sign shall be mounted lower than 40” from the floor or ground surface.
Sign Type Overview
40”
70”
120” 2” Copy Ht. Minimum Between 70” - 120”
5/8”Copy Ht.MinimumBetween40” - 70”
�18
Location & Mounting Requirements - Interior !Tactile Sign Mounting. Tactile signs are to be mounted on the latch side of the door, 2” from the door frame, 48” minimum, 60” maximum measured to the baseline of the raised characters. Ideally, but not a requirement, braille should be placed at one consistent height whenever possible. !18” of clear free space (CFS) must be maintained at the sign location.
Sign Type Overview
18” m
in C
FS
18” min CFScentered ontactile copy
48” (
min
)
60
” (m
ax)
RESTROOMRESTROOM
2”
18” min CFS
�19
Mounting Requirements - Interior
Sign Type Overview
1234#1234
Chris WrightDirector of
Surgical Services
FIRE EXIT#1234
1234#1234
Chris WrightDirector of
Surgical Services
Ideal Location on Latch Side of Door
Inset door opening, then Nearest Adjacent Wall
1234#1234
INNERFACEConference
Center
Inset door opening, No space on Latch Side
1234#1234
INNERFACEConference
Center
Double doors with 2 Active Leafs Double Doors with 1 Active Leaf
Located on Push Side of Door if Door Opens Inwardand Does Not have a Hold-open Device
1234#1234
Chris WrightDirector of
Surgical Services
�20
Mounting Instructions - Exterior !Exterior Installation Standards: !Exterior signs are generally much larger and heavier than interior signs, and require construction-grade anchoring and attachment. The drawings shown in the next section suggest only a general description of installation methodology, and should not be used for the specific application of an actual installation. All municipalities require the property owner to obtain construction permits and inspections for installation of signs above a certain size, in addition to electrical permits for those signs that are illuminated. Many exterior signs also require structural engineering calculations and analysis to evaluate wind and other load distributions, and ensure the safety of the proposed sign installation. !All required documentation will be generated and delivered to the appropriate authorities upon request and approval of a needed exterior sign of this type. If a sign does not require municipal review because it is smaller and less complex, appropriate footings or attachments will be designed for the specific site conditions and context upon request. In every case, since safety outweighs expediency, survey and review of specific site conditions is required before coordination of any exterior sign installation.
Sign Type Overview
�21
Mounting Instructions - Interior !Double-Sided Tape Mounting: !Materials: Tape Measure, Level, Sign Instructions: Remove tape backing and apply sign to surface. As with all adhesives, the user must ensure the surface to which the sign is to be mounted is clean, dry, and free from any form of grease, oil, or silicones. If the sign is to be affixed to a wood, the surface must have been sealed with a varnish or lacquer prior to attachment. Textured wall covering and some vinyl wall covering may reject double-sided tape. The sign may appear to adhere initially, but may release shortly thereafter. For this reason, it is advisable to perform a test with a single sign prior to installing all signs in the project. Usually 24 hours is sufficient to determine if tape and wall covering are compatible. If the wall covering rejects the tape, a silicone adhesive, clear silicone sealant can be used to supplement the tape, as the tape will hold the sign in place until the silicone adhesive sets up. Again, a test for suitability with a single sign is advisable. If this is the case, please contact your Innerface representative for more information. Caution: Double-Sided tapes are aggressive and may be difficult to remove and/or reposition once attached. For this reason, make certain the sign is correctly positioned (top side up), level and plumb before pressing into place. Applying pressure will activate adhesive and ensure the double-sided tape conforms to mounting surface. !Ceiling / Perpendicular Mounting: !Materials: Tape Measure, Level, Sign, Mounting Hardware Instructions: Pre-drill holes in surface to align with mounting unit. Mechanically fasten sign to surface with screws. For all signage installation projects that require drilling in occupied areas, the project manager should be contacted for approval prior to installation.
Sign Type Overview
�22
Exterior Sign Types
�23
Sign Type A.1 - Branding/Logo Application
Dimensional logo/lettering. Aluminum constructionwith acrylic faces. LED illumination.
Sign Type size will need to vary based onthe environment. Aesthetic andmanufacturing details that need tobe followed:
Size reduction to be porportional.
If diameter of logo mark falls below __”in any application, the copy and rule mayneed to be “thickened” to accompdateillumination hardware. Approval is requiredbefore such an application can bemanufactured.Please call the Marketing Department at___-___-_____ for approval.
Non-illuminated option is acceptable,if size is reduced to prohibit internalillumination. In these cases, dimensionalor flat cut aluminum is acceptable.
Recommended attachment is “individual”mounting to proposed surface. In thecases that access/architectural limitationsprevent this type of attachment, mountingall graphics on a raceway/wireway isacceptable. Raceway/wireway must bepainted to match the surface theapplication is being mounted to.
Illuminatation:
Scale: NTS
120v OR
�24
Sign Type A.2 - Branding/Logo Application - Mark Only
Dimensional logo/lettering.Aluminum construction with acrylic faces.LED illumination.
Sign Type size will need to vary based onthe environment. Aesthetic andmanufacturing details that need tobe followed:
Size reduction to be porportional.
If diameter of logo mark falls below __”in any application, the copy and rule mayneed to be “thickened” to accompdateillumination hardware. Approval is requiredbefore such an application can bemanufactured.Please call the Marketing Department at___-___-_____ for approval.
Non-illuminated option is acceptable,if size is reduced to prohibit internalillumination. In these cases, dimensionalor flat cut aluminum is acceptable.
Recommended attachment is “individual”mounting to proposed surface. In thecases that access/architectural limitationsprevent this type of attachment, mountingall graphics on a raceway/wireway isacceptable. Raceway/wireway must bepainted to match the surface theapplication is being mounted to.
Illuminatation:
Scale: NTS
120v OR
�25
Sign Type B - Primary Identification/Directional
EMERGENCY
Parking
Main Entrance
Clinics
Logo Area17-1/2”h x 41-3/4”wRouted out and pushed thru whiteacrylic (1/4” thick, 1/8” push thru).Vinyls: Calon Trans. 05 (Blue).
Directional Messaging Area. Removable, 1” reverse pan panel.Capheight, 4-3/8”. Arrows, 5-1/2”. White pigmented acrylic facewith digitally printed clear vinyl applications. Red, Green, Purple.Panels to be produced so entire panel illuminates.
Painted, Pantone 7487
Painted, Pantone 2985
Painted, Pantone 301
Dual Internal steel poles for direct burialwith 1-2” high mow strip.
Painted, Pantone 1235
Custom aluminum cabinet system.Full bleed faces. No visible fasteners.All to be fabricated from 1/8” aluminum.Painted: Various
LED illumination.94"
Front ViewSide View
79" 12"
3"
12"56"11-1/4" 11-3/4"
134-3/4"
1-1/4"
136"
42"
9"
9"
9"
9"
2"
2"
2"
124-3/8"
10-1/4"
1-3/8"25-3/4"
67"
16"
1" 1"
1"
1"
12"16"
�26
Sign Type C.1 - Vehicular Pageantry/Fixed
Direct burialwith 1-2” high mow strip.
Custom Post & Panel system.4” dia. round post with 1” slide reveal bar,holding a 1”x1” square bar frame, with dual1/8“ thick panel on each side of frame.All to be fabricated from 1/8” aluminum.Painted: Various
Painted, Pantone 1235
Painted, Pantone 7487
Painted, Pantone 2685
Painted, MAP White
Painted, Pantone 2985
Non illumination.
Front ViewSide View
140"
58"
58"
4"
28-3/4"
4"
1"4"
�27
Sign Type C.2 - Vehicular Pageantry/Changeable
Direct burialwith 1-2” high mow strip.
Custom Post & Panel system.4” dia. round post with SignFix hardware.Fabric Banners to be digitally printed onexteriorgrade media. Gold band to be a1”x1” channel glued to post.Painted: Various
Painted, Pantone 1235
Painted, Pantone 7487
Non illumination.
Front ViewSide View
140"
68"
4"
18"
4"
1"4"
�28
Sign Type D.1 - Parking Identification/Primary
Parking
Children’sHospital Entrances
Parking Symbol/Copy19-1/2”dia. symbol. Capheight 7-1/2”.Routed out and pushed thru whiteacrylic (1/4” thick, 1/8” push thru).
Messaging Area. Capheight, 4-1/2” & 3”. Removable, 1” reverse pan panel.White pigmented acrylic face with digitally printed clear vinylapplications. Purple. Panel to be produced so entirepanel illuminates.
Painted, Pantone 7487
Painted, Pantone 363
Dual Internal steel poles for direct burialwith 1-2” high mow strip.
Painted, Pantone 1235
Custom Series 7 aluminum cabinet system.Full bleed faces. No visible fasteners.All to be fabricated from 1/8” aluminum.Painted: Various
LED illumination.
Front View
Top View
Side View
72-3/4"
64-3/4" 6"
2"
6"
7"
1" 1"
6"7"
110-1/2"
16-3/4"
33-3/4"
60"
102"
1"7-1/2"
�29
Sign Type D.2 - Parking Identification/Secondary
ParkingAccessible
Parking Symbol/Copy11”dia. symbol. Capheight 4-1/4”.HP vinyl application. Calon 02 (White).
Messaging Area. Capheight, 2-1/2”.HP vinyl application. 31 (Ocean Blue), 02 (White).
Painted, Pantone 7487
Painted, Pantone 363
Direct burialwith 1-2” high mow strip.
Painted, Pantone 1235
Custom Series 3 aluminum cabinet system.Full bleed faces. No visible fasteners.All to be fabricated from 1/8” aluminum.Painted: Various
Non illumination.
Front ViewSide View
41"
36"
4"1"
Top View
3-1/4" 4"
4"
3-1/4"
91"
1"4"
61-1/2"
34-1/2"
96"
�30
Sign Type D.3 - Parking Identification/Tertiary
ParkingPhysician Only
Parking Symbol/Copy
6-3/8”dia. symbol. Capheight 2-3/8”.
HP vinyl application. Calon 02 (White).
Messaging Area. Capheight, 1-1/4”.
HP vinyl application. 80 (Graphite), 02 (White).
Painted, Pantone 7487
Painted, Cool Gray 11
Direct burial
with 1-2” high mow strip.
Painted, Pantone 1235
Custom Series 1 aluminum post & panel system.
3-1/4” dia. round post. Full bleed faces. No visible fasteners.
All to be fabricated from 1/8” aluminum.
Painted: Various
Non illumination.
Front View
24-3/4"
21"
3-1/4"1/2"
Side View
Top View
1/8" 2"
3-1/4"
1/8"
71-1/4"
1/2"2"
73-3/4"
36"
�31
Sign Type E.1, E.2 - Parking Garage
EXIT ONLY
Parking Entrance
CLEARANCE 6’-10”
CLEARANCE 6’-10”
Parking Symbol
21-1/4”dia. symbol.
HP vinyl application. Calon 02 (White).
Painted, Pantone 7487
Painted, Pantone 363
Wall Mounted, concrete facade.
Painted, Pantone 1235
Custom Series 3/7 aluminum cabinet system.
Full bleed faces. No visible fasteners.
All to be fabricated from 1/8” aluminum.
Painted: Various
Parking Symbol/Copy
8-1/2”dia. symbol. “Parking...” Capheight, 5”. “Clearance” Capheight, 2-1/2”
HP vinyl application. Calon 02 (White), 03 (Black).
Painted, Pantone 7487
Painted, Pantone 363
Wall Mounted, concrete facade.
Painted, Pantone 1235
Custom Series 3/7 aluminum cabinet system.
Full bleed faces. No visible fasteners.
All to be fabricated from 1/8” aluminum.
Painted: Various
E.2
E.1
Non illumination.
Non illumination.
41-1/4"
36"
2"3-1/4"
Top View
Top View
Front View
Other Layouts
3-1/4" 10-3/4"7"
138"
2" 2"
7" 7"
156"
44" 37-1/2"
7"
18"
�32
Sign Type E.3, E.4, E.5 - Parking Garage
ParkingNo Left Turn Elevator to the Hospital
STAIRS
ElevatorDirectory
Level 1Level 2Level 3Level 4Level 5
Compact CarsONLY
STAIR
ROOF ACCESS
51-5
FIRE EXIT, LEVEL 1
Arrow/Copy
4” Arrow. Capheight, 3”
Painted: Various.
HP vinyl application. Calon 02 (White).
Ceiling Suspended using aircraft cable
with PVC covers, painted MAP black.
Custom aluminum cabinet system.
Full bleed faces. No visible fasteners.
All to be fabricated from 1/8” aluminum.
Painted: Various
Copy
Stair Symbol, 12”.
Large Number, 12“ capheight.
Capheight, 2”
Painted: Various.
HP vinyl application. Calon 02 (White).
Wall Mounted, concrete facade.
1/8” flat aluminum panel.
Painted: Various
Copy
Capheight, 1”
Painted: Various.
HP vinyl application. Calon 02 (White).
Wall Mounted, concrete facade.
1/8” flat aluminum panel.
Painted: Various
E.3
E.4
E.5Non illumination. Non illumination.
Front View
Top View
Other Layouts
Other Layouts
72"
8"
1"
29-1/4"
16 1/4"
25"
24"1"
12"1/2"
5"
�33
Sign Type F.1, F.2 - Pedestrian Directional
HospitalEntrances
MainEntrance
Children’sMedical Office
Building
KoppelPlaza
ParkingGarage
Arrow/Copy
5” arrow. Capheight 4” & 3”.
HP vinyl application. Calon 02 (White).
Painted, Pantone 7487
Painted, Pantone 2685
Dual Internal steel poles for direct burial
with 1-2” high mow strip.
Painted, Pantone 1235
Custom Series 3 aluminum cabinet system.
Full bleed faces. No visible fasteners.
All to be fabricated from 1/8” aluminum.
Painted: Various
F.1
F.2
Non illumination.
47-3/4"
41-3/4"
4"2"
48-1/2"
42-1/2"
4"2"
Front ViewSide View
Top View
Other Layouts
Top View
3-1/4" 4"
Top View
3-1/4" 4"
4"
3-1/4"
66"
1"4"
71"
4"
3-1/4"
102"
1"5"
108"
Front ViewSide View
�34
Sign Type G - Pedestrian Pageantry/Fixed
Custom Post & Panel system.3-1/4” dia. round post with 1” slide reveal bar,holding a 1”x1” square bar frame, with dual1/8“ thick panel on each side of frame.All to be fabricated from 1/8” aluminum.Painted: Various
Non illumination.
Direct burialwith 1-2” high mow strip.
Painted, Pantone 1235
Painted, Pantone 7487
Painted, Pantone 2685
Painted, Pantone 2985
Painted, MAP White
Front View
Top View
Side View
81-1/2"
44"
3-1/4"
16-3/4"
1"
3-1/4"
3-1/4"
�35
Sign Type H.1, H.2 - Building Entrance Identification/Cabinet Style
EMERGENCY
Clinics
Main Entrance
LED illumination.
ETCH Logo
18” x 24-1/2”.
HP vinyl application. Calon 02 (White).
Painted, Pantone 7487
Painted, Pantone 301
Wall Mounted, concrete facade.
Painted, Pantone 1235
Custom Series 3/7 aluminum cabinet system.
Full bleed faces. No visible fasteners.
All to be fabricated from 1/8” aluminum.
Painted: Various
Copy
Capheight, 8-3/4”
Routed out and pushed thru white
acrylic (1/4” thick, 1/8” push thru).
Painted, Pantone 7487
Painted, Pantone 301
Wall Mounted, concrete facade.
Painted, Pantone 1235
Custom Series 3/7 aluminum cabinet system.
Full bleed faces. No visible fasteners.
All to be fabricated from 1/8” aluminum.
Painted: Various
H.1
H.2
Non illumination.41-1/4"
36"
2"1-3/4"
Front View
Other Layouts
Top View
3-1/4" 10-3/4"7"
44" 30-1/2"
Top View
7"
138"
2" 2"
7" 7"
156"
18"
�36
Sign Type H.1, H.3 - Building Entrance Identification/Lettering
LED illumination.
12” Capheight (number of letters will vary depending on location).
Aluminum construction, LED illumination. 3” deep, with white acrylic face.
ETCH Logo
18” x 24-1/2”.
HP vinyl application. Calon 02 (White).
Painted, Pantone 7487
Painted, Pantone 301
Wall Mounted, concrete facade.
Painted, Pantone 1235
Custom Series 3/7 aluminum cabinet system.
Full bleed faces. No visible fasteners.
All to be fabricated from 1/8” aluminum.
Painted: Various
H.1
Non illumination.
H.3
Other Layouts
41-1/4"
36"
2"1-3/4"
Top View
3-1/4" 10-3/4"7"
44" 30-1/2"
12"
Non-illuminated option is acceptable, if; location orsize prohibits internal illumination.In these cases, dimensional or flat cut aluminum isacceptable.
Recommended attachment is “individual” mountingto proposed surface. In the cases that access/architectural limitations prevent this type ofattachment, mounting all graphics ona raceway/wireway is acceptable. Raceway/wirewaymust be painted to match the surfacethe application is being mounted to.
�37
Sign Type H.4 - Building Entrance Identification/Directory
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Main Directory - Wall Mounted.
ARQ frame & insert module (23x44-3/4)
with custom backplate.
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
CMOB Directory
Destination Floor
Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1
You are entering at, Floor 1
H.4
52-3/4"
52-3/8"
8" x 3-3/8” logo. Screened, White.
ARQ Frame and Insert (23 x 72)
Insert to be full color digital print.
3” Dia., half-round PVC pipe.
Painted, Pantone 7487
Custom backplated (28-1/8” x 52-3/4”).
Painted, Pantone 301, 2985, 1235
23"x72"ARQ Module
27-3/8"
3/4" 2"2"1/4"
44-3/4"
6-5/8"
1"
Front ViewSide ViewSide View
48-1/2"
3/4"
�38
Sign Type J - Regulatory/Informational
AccessibleParking
TOW ZONE
AccessibleParking
TOW ZONE
HospitalVehicles
RESTRICTED
NoParking
TOW ZONE
Drop OffOnly
TOW ZONE
DO NOTENTER
TobaccoFree
CAMPUS WIDE
Symbol/Copy
3 5/8”dia. symbol. Capheight 1” & 3/4”.
HP vinyl application. Calon 02 (White), 01 (Red).
Painted, Pantone 7487
Painted, Pantone 301
Direct burial
with 1-2” high mow strip.
Painted, Pantone 1235
Custom Series 1 aluminum post & panel system.
3-1/4” dia. round post. Full bleed faces. No visible fasteners.
All to be fabricated from 1/8” aluminum.
Painted: Various
Non illumination.
15-3/4"
12"
3-1/4"1/2"
Front View
Other Layouts
Top View
1/8" 3-1/4"
Side View
3-1/4"
1/8"
82"
1"1-3/8"
20-3/8"
84-3/8"
�39
Interior Sign Types
�40
Sign Type A.1 - Main Directory, Freestanding
Main DirectoryDestination Floor
Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1
You are in the Hospital, Floor 1
Front ViewSide View
23"x72"ARQ Module
27-3/8"
3/4" 3"3"
4"
72"
78"78-1/4"
1/4"
8" x 3-3/8” logo. Screened, White.
ARQ Frame and Insert (23 x 72)Insert to be full color digital print.
3” Dia., round PVC pipe.Painted, Pantone 7487
Custom Aluminum Cabinet (28-1/8” x 78-1/4”).Painted, Various.
74"
1"
Sign Type Function/Description -
Function:Visitor & Patient Experience
Description:Main Directory - Free Standing Unit.ARQ frame & insert module (23x72)with custom center cabinet.
Sides/Faces - Two
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�41
Sign Type A.2 - Main Directory, Wall Mounted
Main DirectoryDestination Floor
Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1
You are in the Hospital, Floor 1
52-3/4"
52-3/8"
8" x 3-3/8” logo. Screened, White.
ARQ Frame and Insert (23 x 72)Insert to be full color digital print.
3” Dia., half-round PVC pipe.Painted, Pantone 7487
Custom backplated (28-1/8” x 52-3/4”).Painted, Pantone 301, 2985, 1235
23"x72"ARQ Module
27-3/8"
3/4" 2"2"1/4"
44-3/4"
6-5/8"
1"
Front ViewSide ViewSide View
48-1/2"
3/4"
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Main Directory - Wall Mounted.
ARQ frame & insert module (23x44-3/4)
with custom backplate.
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�42
Sign Type B - Elevator Directory
Destination Floor
Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1Destination 1
You are in the Hospital
Elevators A
6" x 2-1/2” logo. Screened, White.
Signature Frame and Inserts (18 x 28).Painted, Pantone 2685Inserts to be full color digital print.Inserts - (1) A Insert, (1) Custom B Insert
2” Dia., half-round PVC pipe.Painted, Pantone 7487
Custom backplate (20-5/8” x 33-1/8”).Painted, Pantone 301, 2985, 1235
18"x28"Signature Module
20"
5/8"
2"2"
1/4"
3/16"
Front ViewSide View
33-1/8" 32-3/4"
28"
4"
3/4"
30-1/8"
5/8"
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Elevator Directory - Wall Mounted.
Signature frame & insert module (18x28)
with custom backplate.
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�43
Sign Type C - Directional, Wall Mounted
Elevators B
EMERGENCY
You are in the Hospital
1st
Elevator C
Laboratory
Information ?
Coffee Shop
Radiology
Restrooms
6" x 2-1/2” logo. Screened, White.
Signature Frame and Inserts (18 x 28).Painted, Pantone 2685Inserts to be full color digital print.Inserts - (1) A Insert, (10) B InsertS, (1) C Insert
2” Dia., half-round PVC pipe.Painted, Pantone 7487
Custom backplate (20-5/8” x 33-1/8”).Painted, Pantone 301, 2985, 1235
18"x28"Signature Module
20"
5/8"
2"2"
1/4"
3/16"
Front ViewSide View
33-1/8" 32-3/4"
28"
4"
3/4"
30-1/8"
5/8"
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Directional - Wall Mounted.
Signature frame & insert module (18x28)
with custom backplate.
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�44
Sign Type D.1 - Identification & Directional, Suspended Overhead
Elevators A
Walkway to
CMOB & Koppel
Other Layouts
3” capheight. HP vinyl, White.4” Dia., half-round PVC pipe.
Painted, Pantone 7487
Custom panel with round accent (8-3/4”x46-1/2”).Painted, Pantone 2685, 2985, 1235.
Front View
Top View
7-1/4"
8-3/4"
3/4"
41-1/8"
46-1/2"
1-3/8" 4"
4" Dia.
Sign Type Function/Description -
Function:Visitor & Patient Experience
Description:Identification/Directional - Directional.Custom module (46-1/2”x8-3/4“).
Sides/Faces - Two
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�45
Sign Type D.2 - Identification & Directional, Suspended Overhead
ATM
3” capheight. HP vinyl, White.
4” Dia., half-round PVC pipe.
Painted, Pantone 7487
Custom panel with round accent (8-3/4”x22-3/8”).
Painted, Pantone 2685, 2985, 1235.
Front View
7-1/4"
8-3/4"
Top View
3/4"
17"
22-3/8"
1-3/8" 4"
4" Dia.
Sign Type Function/Description -
Function:Visitor & Patient Experience
Description:Identification/Directional - Directional.Custom module (22-3/8”x8-3/4“).
Sides/Faces - Two
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�46
Sign Type E - Primary/Departmental Identification
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Primary/Departmental Identification - Wall Mounted.
Signature Frames and Inserts (6-1/8” x 9-1/8” &
11-9/16“ x 9-1/8”). “Open” slider feature.
Insert to be full color digital print.
Inserts -
(2) A Inserts
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
(MENU)
CONFERENCE
ROOM
See Schedule Below
Signature Frame and Insert (6-1/8” x 9-1/8”).Painted, Pantone 3015/8” capheight, tactile w/ grade 2 Braille, White.Insert to be full color digital print.Inserts - (1) A Insert
Signature Frame and Insert (11-9/16” x 9-1/8”).Insert to be a letter size sheet of paper.
1” Dia., half-round PVC pipe.Painted, Pantone 7487
Custom backplate (12-3/4” x 21-1/8”).Painted, Pantone 301, 2985, 1235
9-1/8"Signature Module
12-3/8"
3/8"
1"
1"
1/4"
3/16"
Side View Front View
2-9/16"
21-1/8"
11-9/16"
6-1/8"
3/4"
19-3/8"
3/8"
�47
Sign Type F.1 - Primary Room Identification
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Primary Room Identification - Wall Mounted.
Signature Frame and Insert (8-3/4” x 8-3/4”).
5/8” capheight, tactile w/ grade 2 Braille, White.
“Open” slider feature.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
RADIOLOGY
Radiation
OPEN
Signature Frame and Insert (8-3/4” x 8-3/4”).
Painted, Pantone 301
5/8” capheight, tactile w/ grade 2 Braille, White.
“Open” slider feature.
Insert to be full color digital print.
Inserts -
(1) A Insert
1” Dia., half-round PVC pipe.
Painted, Pantone 7487
Custom backplate (9-7/8” x 11-3/4”).
Painted, Pantone 301, 2985, 1235
8-3/4”Signature Module
9-1/2"
3/8"
1"
1"
1/4"
3/16"
Side View Front View
11-3/4"
2-3/8"
8-3/4"
5/8"
10-3/8"
3/8"
�48
Sign Type F.2 - Primary Room Identification
FAMILY
RESOURCE
CENTER
Please, come in.
Signature Frame and Insert (8-3/4” x 8-3/4”).Painted, Pantone 3015/8” capheight, tactile w/ grade 2 Braille, White.Insert to be full color digital print.Inserts - (1) A Insert
1” Dia., half-round PVC pipe.Painted, Pantone 7487
Custom backplate (9-7/8” x 11-3/4”).Painted, Pantone 301, 2985, 1235
8-3/4”Signature Module
9-1/2"
3/8"
1"
1"
1/4"
3/16"
Side View Front View
11-3/4"
2-3/8"
8-3/4"
5/8"
10-3/8"
3/8"
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Primary Room Identification - Wall Mounted.
Signature Frame and Insert (8-3/4” x 8-3/4”).
5/8” capheight, tactile w/ grade 2 Braille, White.
“Open” slider feature.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
PLAYROOM
Please, be careful.
INFORMATIONMANAGEMENT
Medical Records
FAMILYKITCHEN
Please, wash hands.
Other Layouts
�49
Sign Type G.1 - Secondary Room Identification
EXAM ROOM 1
Radiation
OPEN
Signature Frame and Insert (8-3/4” x 8-3/4”).
Painted, Pantone 301
5/8” capheight, tactile w/ grade 2 Braille, White.
“Open” slider feature.
Insert to be full color digital print.
Inserts -
(1) A Insert
8-3/4”Signature Module
3/16"
Side View Front View
8-3/4"
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Secondary Room Identification - Wall Mounted.
Signature Frame and Insert (8-3/4” x 8-3/4”).
5/8” capheight, tactile w/ grade 2 Braille, White.
“Open” slider feature.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�50
Sign Type G.2 - Secondary Room Identification
FAMILY
RESOURCE
CENTER
Please, come in.
3/16"
Side View
Signature Frame and Insert (8-3/4” x 8-3/4”).
Painted, Pantone 301
5/8” capheight, tactile w/ grade 2 Braille, White.
“Open” slider feature.
Insert to be full color digital print.
Inserts -
(1) A Insert
8-3/4”Signature Module
Front View
8-3/4"
RESTROOM MEN WOMEN STAIR FLOOR 1In Case Of Fire,Use Stairs,Not Elevator
Other Layouts
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Secondary Room Identification - Wall Mounted.
Signature Frame and Insert (8-3/4” x 8-3/4”).
5/8” capheight, tactile w/ grade 2 Braille, White.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�51
Sign Type G.3 - Secondary Room Identification
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Secondary Room Identification - Wall Mounted.
Signature Frame and Insert (4-1/2” x 8-3/4”).
5/8” capheight, tactile w/ grade 2 Braille, White.
“Open” slider feature.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
EQUIPMENT
ROOM
3/16"
Side View
Signature Frame and Insert (4-1/2” x 8-3/4”).Painted, Pantone 3015/8” capheight, tactile w/ grade 2 Braille, White.Insert to be full color digital print.Inserts - (1) A Insert
8-3/4”Signature Module
Front View
4-1/2"
�52
Sign Type H.1 - Patient Room Identification
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Patient Room Identification - Wall Mounted.
Signature Frame and Insert (9-1/8” x 10-1/2”).
5/8” capheight, tactile w/ grade 2 Braille, White.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
2 West
240Signature Frame and Insert (6-1/8” x 9-1/8”).Insert to be a letter size sheet of paper.
1” Dia., half-round PVC pipe.Painted, Pantone 7487
Custom backplate (9-1/8” x 10-1/8”).Painted, Pantone 301, 2985, 1235
9-1/8"Signature Module
10-1/8"
3/8"
1"
1"
1/4"
3/16"
Side View Front View
2-3/8"
9-1/8"
6-1/8"
5/8"
3/8"
7-1/2"
�53
Sign Type H.2 - Patient Room Identification w/ Patient Precaution Panel
2 West
240
9-1/8"Signature Module
10-1/8"
3/8"
1"
1"
1/4"
3/16"
Side View
2-9/16"
15-1/2"
5-7/8"
6-1/8"
3/4"
Front View
Signature Frame and Insert (6-1/8” x 9-1/8”).Insert to be a letter size sheet of paper.
1” Dia., half-round PVC pipe.Painted, Pantone 7487
Custom backplate (9-1/8” x 10-1/8”).Painted, Pantone 301, 2985, 1235
3/8"
14"
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Patient Room Identification - Wall Mounted.
Signature Frame and Insert (15-1/2” x 10-1/2”).
5/8” capheight, tactile w/ grade 2 Braille, White.
Insert to be full color digital print.
Patient Precaution Panel (5-7/8” x 9-1/8”)
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�54
Sign Type J - Donor Recognition
Thankful to
LEE APPLEBLOOM
2 West
240
1/4"
Side View Front View
3"
9-1/8"
Donor panel (3” x 9-1/8”)Laminate, Med. Copper withscreened Black copy.
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Donor Recognition - Wall Mounted.
Panel with Custom Laminate (3” x 9-1/8”).
1/2” & 3/4” capheight, Black.
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
�55
Sign Type K - Restroom Identification
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Restroom Identification - Wall Mounted.
Signature Frame and Insert (8-3/4” x 8-3/4”).
5/8” capheight, tactile w/ grade 2 Braille, White.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
RESTROOM
8-3/4”Signature Module
9-1/2"
3/8"
1"
1"
1/4"
3/16"
Side View Front View
11-3/4"
2-3/8"
8-3/4"
5/8"
Signature Frame and Insert (8-3/4” x 8-3/4”).
Painted, Pantone 301
4“ & 2” Restroom & HC symbols, White.
5/8” capheight, tactile w/ grade 2 Braille, White.
Insert to be full color digital print.
Inserts -
(1) A Insert
1” Dia., half-round PVC pipe.
Painted, Pantone 7487
Custom backplate (9-7/8” x 11-3/4”).
Painted, Pantone 301, 2985, 1235
10-3/8"
3/8"
MEN WOMEN
Other Layouts
�56
Sign Type L - Stair/Floor Identification
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Stair/Floor Identification - Wall Mounted.
Signature Frame and Insert (8-3/4” x 8-3/4”).
5/8” capheight, tactile w/ grade 2 Braille, White.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
FLOOR 1In Case Of Fire,Use Stairs,Not Elevator
Other Layouts
STAIR
Front View
8-3/4”Signature Module
9-1/2"
3/8"
1"
1"
1/4"
3/16"
Side View
11-3/4"
2-3/8"
8-3/4"
5/8"
Signature Frame and Insert (8-3/4” x 8-3/4”).
Painted, Pantone 301
4“ & 2” Restroom & HC symbols, White.
5/8” capheight, tactile w/ grade 2 Braille, White.
Insert to be full color digital print.
Inserts -
(1) A Insert
1” Dia., half-round PVC pipe.
Painted, Pantone 7487
Custom backplate (9-7/8” x 11-3/4”).
Painted, Pantone 301, 2985, 1235
10-3/8"
3/8"
�57
Sign Type M - Floor Identification, Stairwell
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Floor Identification/Stairwell - Wall Mounted.
Exterior Grade Single Unit (16” x 16”).
1” & 5“ capheights, tactile w/ grade 2 Braille, White.
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
STAIR A
NO ROOF ACCESS
1LEVEL 1 - 4
FIRE EXIT LEVEL 1
3/16"
Front ViewSide View
16"
16"
�58
Sign Type N.1 - Informational
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Informational - Wall Mounted.
Signature Frame and Insert (4-1/2” x 8-3/4”).
5/8” capheight, tactile w/ grade 2 Braille, White.
“Open” slider feature.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
(MAP)
Evacuation Plan
Signature Frame and Insert (11-9/16” x 9-1/8”).Insert to be a letter size sheet of paper.
1” Dia., half-round PVC pipe.Painted, Pantone 7487
Custom backplate (14-9/16” x 10-1/2”).Painted, Pantone 301, 2985, 1235
9-1/8"Signature Module
10-1/8"
3/8"
1"
1"
1/4"
3/16"
Side View Front View
14-9/16"
11-9/16"
2-3/8"
5/8"
13"
(INFORMATION)
Other Layouts
�59
Sign Type N.2 - Informational
Sign Type Function/Description -
Function:
Visitor & Patient Experience
Description:
Informational - Wall Mounted.
Signature Frame and Insert (4-1/2” x 8-3/4”).
5/8” capheight, tactile w/ grade 2 Braille, White.
“Open” slider feature.
Insert to be full color digital print.
Inserts -
(1) A Insert
Sides/Faces - One
Font - Lucida Sans (Bold, Reg.,Italic).
Illuminatation: Non-Illuminated.
(INFORMATION) Signature Frame and Insert (6-1/8” x 9-1/8”).Insert to be a letter size sheet of paper.
1” Dia., half-round PVC pipe.Painted, Pantone 7487
Custom backplate (9-1/8” x 10-1/8”).Painted, Pantone 301, 2985, 1235
9-1/8"Signature Module
10-1/8"
3/8"
1"
1"
1/4"
3/16"
Side View Front View
2-3/8"
9-1/8"
6-1/8"
5/8"
3/8"
7-1/2"
�60