Upload
hakhuong
View
227
Download
0
Embed Size (px)
Citation preview
Restricted © Siemens AG 2015 Realize innovation.
Welcome to Solid Edge University Siemens PLM Software
#SEU15
2015-XX-XX
Restricted © Siemens AG 2015
Page 2 Siemens PLM Software
State-of-the-Art Drafting, Made Even Better
• Investing in What You Need
• General Workflow
• Dimension Enhancements
• Annotation Enhancements
2015-XX-XX
Restricted © Siemens AG 2015
Page 3 Siemens PLM Software
Investing in What You Need
Where do you spend most of your time on drawing creation? Drawing View creation and update? Tables? 2D geometry? No? You tell us that you spend most of your time annotating the drawing! Many resources have been applied to enhancing drawing annotation in ST6, ST7, and ST8. This effort will continue into the future to help make you more productive.
2015-XX-XX
Restricted © Siemens AG 2015
Page 4 Siemens PLM Software
General Workflow
Empty Text Box and Callout Display Previous display did not show empty Callout and Text Boxes. • Can interfere with locate and other workflows. We started displaying these so you can see them and clean them up. • They do not print or show up in Save as Image or Save as PDF. • My world is falling apart because I don’t understand what this is??????
Added options in Solid Edge Options – General Tab. • Custom error string
2015-XX-XX
Restricted © Siemens AG 2015
Page 5 Siemens PLM Software
Clean Up a Drawing (Delete everything but Drawing Views) You may not know. Use CTRL+A to select everything. Press Delete Click No to keep Drawing Views
General Workflow
2015-XX-XX
Restricted © Siemens AG 2015
Page 6 Siemens PLM Software
General Workflow
Fence Selection (Directional) Left to Right Fence • Inside Entire object must be inside fence to select. • Dimensions not selected
2015-XX-XX
Restricted © Siemens AG 2015
Page 7 Siemens PLM Software
General Workflow
Fence Selection (Directional) Right to Left Fence • Inside and Overlapping Entire object does not need to be inside fence to select. • Dimensions are selected • Drawing View?
• Shift click drawing view • Or click No when prompted
on Delete
2015-XX-XX
Restricted © Siemens AG 2015
Page 8 Siemens PLM Software
Dimensioning
Dimension Alignment Sets Collections of dimensions that are aligned (chain and/or stack). Alignment creation can be toggled on/off.
Toggling off does not dissolve any existing dimension alignment sets.
2015-XX-XX
Restricted © Siemens AG 2015
Page 9 Siemens PLM Software
Dimensioning
Dimension Alignment Sets Collections of dimensions that are aligned (chain and/or stack). (ST5) Chain Dimensions – Drag as single set (ST5) Stack Dimensions – Drag as single set
2015-XX-XX
Restricted © Siemens AG 2015
Page 10 Siemens PLM Software
Dimensioning
Dimension Alignment Sets Collections of dimensions that are aligned (chain and/or stack). (ST6) Combination Chain and Stack Dimensions – Drag as single set • Hybrid Set – Both Chain and Stack
2015-XX-XX
Restricted © Siemens AG 2015
Page 11 Siemens PLM Software
Dimensioning
Dimension Alignment Sets Dimension Alignment Indicator Disjoint Chain Set– Create dimension by geometry and then align with existing chain. • Don’t select existing chain first and then select geometry.
2015-XX-XX
Restricted © Siemens AG 2015
Page 12 Siemens PLM Software
Dimensioning
Dimension Alignment Sets
Pure Stack – Set with only stacked dimensions. Insert into Pure Stack – Select stack to insert dimension and then select geometry to dimension. Automatically adjusts stack
2015-XX-XX
Restricted © Siemens AG 2015
Page 13 Siemens PLM Software
Dimensioning
Dimension Alignment Sets
Hybrid Set– Take care when working with hybrid sets. Stack dimensions on left and continue with dimensions on right. Symmetry is recognized and will chain with like dimensions.
2015-XX-XX
Restricted © Siemens AG 2015
Page 14 Siemens PLM Software
Dimensioning
Dimension Alignment Sets Hybrid Set– Take care when working with hybrid sets. Adding a dimension directly into a Stack Set will stack the dimensions by size. • No symmetry case
2015-XX-XX
Restricted © Siemens AG 2015
Page 15 Siemens PLM Software
Dimensioning
Dimension Alignment Sets Hybrid Set– Take care when working with hybrid sets. Create the dimension by geometry and then align with the existing set. Don’t select set first and expect proper alignment.
2015-XX-XX
Restricted © Siemens AG 2015
Page 16 Siemens PLM Software
Dimensioning
Dimension Alignment Sets
Split Alignment Set – Split the set at selected dimension. Break Alignment Set – Dissolve the Alignment Set
2015-XX-XX
Restricted © Siemens AG 2015
Page 17 Siemens PLM Software
Dimensioning
Dimension Alignment Sets
Remove from Alignment Set • Single Dimension • Multiple Dimensions • Creates new set from
selected dimensions
2015-XX-XX
Restricted © Siemens AG 2015
Page 18 Siemens PLM Software
Dimensioning
Dimension Alignment Sets
Arrange Dimensions
Before
After
2015-XX-XX
Restricted © Siemens AG 2015
Page 19 Siemens PLM Software
Dimensioning
Dimension Orientation
Trick Question? What is a Smart Dimension? • Anyone?
• There is no such thing as a ‘Smart Dimension’. • Smart Dimension is a command that places many different dimension types
based on the geometry selected.
2015-XX-XX
Restricted © Siemens AG 2015
Page 20 Siemens PLM Software
Dimensioning
Dimension Orientation
Bringing consistency between Smart Dimension and Distance Between. • Smart Dimension – Enable Orientation Selection
• Use the prompt bar in both commands. • ‘shift’=horizontal/vertical – Toggle between ‘by 2 points’ and
‘horizontal/vertical’ while placing a linear dimension.
2015-XX-XX
Restricted © Siemens AG 2015
Page 21 Siemens PLM Software
Dimensioning
Dimension Orientation
Bringing consistency between Smart Dimension and Distance Between. • Smart Dimension – Enable Orientation Selection
• Status Bar will tell you which dimension type is being placed.
2015-XX-XX
Restricted © Siemens AG 2015
Page 22 Siemens PLM Software
Dimensioning
Concentric Diameter Alignment
New radial dimension type button on Smart Dimension Command bar • ‘Read the prompt’ • Use ‘d’ to cycle through ‘Radius’, ‘Diameter’, and ‘Concentric Diameter’.
Concentric Diameter Dimension • Forces radial dimensions to concentric diameter. • Enables the creation of alignment sets for concentric diameter dimensions
2015-XX-XX
Restricted © Siemens AG 2015
Page 23 Siemens PLM Software
Dimensioning
Concentric Diameter Alignment
Button forces radial dimensions to concentric diameter. Enables the creation of alignment sets for concentric diameter dimensions. Dimensions stack automatically as you go.
2015-XX-XX
Restricted © Siemens AG 2015
Page 24 Siemens PLM Software
Dimensioning
Concentric Diameter Alignment
Automatically inserts into and adjusts the stack as you go.
2015-XX-XX
Restricted © Siemens AG 2015
Page 25 Siemens PLM Software
Dimensioning
Concentric Diameter Alignment
Alternating text positions for readability • Automatically adjusts within stack
2015-XX-XX
Restricted © Siemens AG 2015
Page 26 Siemens PLM Software
Dimensioning
Coordinate Dimensions Improved Creation Workflow • Fewer Clicks for Measure Dimensions • Emphasize Alignment Improved Display Control • Dimension Style and Dimension
Properties • Perpendicular Text (New default) • Allow negative values • Allow origin value change
• Applies change to measure dimensions
Improved Dimension Line Length and Handles • Shortened Dimension Line • Drag Dimension Line to reposition
Improved Jogging • Automatic jog during placement • ALT+Drag text to add jog
• Will also jog adjacent dimensions
Improved Drag Behavior • Drag any dimension line to reposition all
aligned dimension lines
2015-XX-XX
Restricted © Siemens AG 2015
Page 27 Siemens PLM Software
Dimensioning
Coordinate Dimensions
Dimension style and Properties Lines and Coordinate Tab
Improved Placement Workflow
Place Origin Dimension
Single Click Geometry For
Measure Dimension
Dimension Added and Jogged, No
Second Click
Single Click Geometry For
Measure Dimension
Dimension Added and Jogged, No
Second Click
2015-XX-XX
Restricted © Siemens AG 2015
Page 28 Siemens PLM Software
Dimensioning
• Set filter for circle center points only. • Select drawing view to find circles. • Cursor position defines dimension
orientation.
Coordinate Dimensions Place many coordinate dimensions at one time.
Automatic Coordinate Dimension Command
• Selection by drawing view or by
geometry • Filter keypoints to dimension
Select by Drawing View
Select by Geometry
2015-XX-XX
Restricted © Siemens AG 2015
Page 29 Siemens PLM Software
Dimensioning
Dimension Modify Enhancements More Handle Points for Modification • 3 Classes of Handles
• Connect Handles • Modify Handles • Secondary Modify Handles
Terminator Shortcut Menu • Terminator Type • Show Projection Line • Show Dimension Line • Flip Terminator
2015-XX-XX
Restricted © Siemens AG 2015
Page 30 Siemens PLM Software
Annotations
Annotation Modify Enhancements More Handle Points for Modification Consistent Handle Points • 3 Classes of Handles
• Connect Handles • Modify Handles • Secondary Modify Handles
Terminator Shortcut Menu • Terminator Type
Leader Orientation Snap Lines • 45 and 90 Degree Orientations
2015-XX-XX
Restricted © Siemens AG 2015
Page 31 Siemens PLM Software
Annotations
Drawing View Annotation Modify Enhancements Drawing View Annotation Modify Improvements • Cutting Plane Line
• More Modify Handles • Flip Direction on Shortcut Menu
• View Plane Line • More Modify Handles • Secondary Modify Handle to Drag Anywhere
• No Keyboard Input Needed • Detail Envelope
• ANSI Style – Text Orientation Snap Lines
2015-XX-XX
Restricted © Siemens AG 2015
Page 32 Siemens PLM Software
Annotations
Change Leader and Break Line Connect Position (ST5) Leader connect position easily changed
• Use handle at connect position • ‘Read the prompt!’
• “Alt+drag the break line handle point to snap to keypoints." • Lines display snap orientations at each keypoint. • Drop at desired keypoint and orientation.
2015-XX-XX
Restricted © Siemens AG 2015
Page 33 Siemens PLM Software
Annotations
Reference Text Used to extract text from annotations to be inserted into other annotations.
E.g. Feature Control Frame has a reference text that refers to the Datum Frame text ‘A’. If ‘A’ is changed in Datum Frame, then that Feature Control Frame will update automatically.
2015-XX-XX
Restricted © Siemens AG 2015
Page 34 Siemens PLM Software
Annotations
Reference Text Can be from following source annotations: • Callout • Balloon • Datum Frame • Datum Target • Drawing View • Drawing View Annotations
Look for the Reference Text button on annotation UI.
E.g. %{Balloon Upper|Ref:A256} means a
reference to the Upper text in a Balloon with an ID of A256.
2015-XX-XX
Restricted © Siemens AG 2015
Page 35 Siemens PLM Software
Annotations
Annotation Value Formatting Have you ever wondered how to easily find the codes for formatting values in annotations? • Round-off /@2 • No units /NU • Dual Units /DU • Etc. Go to Help and search for ‘format codes’ How can I make this easier?
2015-XX-XX
Restricted © Siemens AG 2015
Page 36 Siemens PLM Software
Annotations
Annotation Value Formatting Underline and highlight property text and 2-letter codes when cursor is within text.
2015-XX-XX
Restricted © Siemens AG 2015
Page 37 Siemens PLM Software
Annotations
Annotation Value Formatting Look for the Format button on the available annotations.
2015-XX-XX
Restricted © Siemens AG 2015
Page 38 Siemens PLM Software
Annotations
Annotation Value Formatting Format the property text through the Format Values dialog. • No Units and Dual Units • Round-off
• Date-time • Text case
• Tolerance UI enabled or disabled based on property selected.
2015-XX-XX
Restricted © Siemens AG 2015
Page 39 Siemens PLM Software
What’s Next?
Whatever you collectively tell us! Always more to come. Thank You!
2015-XX-XX
Restricted © Siemens AG 2015
Page 40 Siemens PLM Software
Contact
Ricky Black Product Manager (Drafting and PMI) Solid Edge Planning
675 Discovery Drive Huntsville, Al. 35053
Phone: (256) 705 - 2631 Fax: (256) 705 - 2695
E-mail: [email protected]
Realize innovation.