5000 E Series3 phase MODULAR UPS Systems

50 - 800kVA Features:

Scalable modular architecture.

True on-line, double conversiontopology: VFI-SS-111 classification.Outputs from 50 - 800kVA/kW.

1.0 Output PF.

Excellent input characteristics: PF>.99;THDi

Typical Applications Include;■- Co location.■- Data-centres.■- Disaster recovery data-centre.■- Telecommunication installations.■- Healthcare.■- Industrial.■- Infrastructure projects.

Rated Capacity: 50-800kVA (1-16 power modules).

Rated Voltage: 380/400/415 Vac.

Rated Frequency: 50/60 Hz.

Type: Transformer-less, Online, double-conversion, modular.

Series Modular Uninterruptible Power System

SIELEnergy Systems

SIELEnergy Systems

Scalability

■ The 5000-E series offers the ability for system expansion to coincide with increases in your load growth, thus negating the need to install an oversized system on day 1.

The systems hot-swappable modular architecture supports flexibleon site expansion for capacity and/or resilience as and whenrequired.

>> All Hot-Swap Module Design

Reduced MTTR - High Availability.

In the unlikely event of a fault occurring modules can be swapped on-line without risk to the critical load and without the need to transfer to bypass.

Modules are individually switched off before removal from the system. Swap out time is minimal, thus resulting in significantly reduced MTTR. The true modular concept also offers significant advantages in respect to maintainability and reduces the level of spare part inventories compared to traditional systems.

Series Modular Uninterruptible Power System

■ When load levels allow, Intelligent hibernation can be enabled and one or more modules will switch to a "standby" state to boost load levels on active modules ensuring the system operates at it’s optimum efficiency.

■ To ensure availability is maintained, at least one power module serves as a redundant module and when load levels dictate, hibernating module(s) are automatically reinstated.

Module

Module

Module

Module

Module

Module

Module

Module

High Operating Efficiency

■ The design configurations of traditional UPS Systems has in the past resulted in the necessity to oversize the system at the initial design stage to meet the expected future power demand, the result being that these types of installations are often operated at low load levels resulting in lower operating efficiencies.

■ The 5000 - E series UPS demonstrates an industry leading high efficiency level at low load; 96% at 40% rated load and 95% at 20% rated load resulting in significant energy & cooling cost saving and overall reductions in your TCO.

■ Given 200 kW load and air conditioner with a COP of 3:1,

- 80, 183 kWh can be saved compared to traditional UPS(92% efficiency)

- 257, 731 kWh can be saved compared to legacy UPS(86% efficiency)

>> High Efficiency at Low Load Level

>> Intelligent Hibernation Design

■ When the quality of the mains supply permits, ECO mode can be enabled which improves the overall efficiency to more than 99% achieving even greater levels of energy savings.

■ In ECO mode, the load is powered by static bypass (the allowable input tolerance range can be pre-set) and the inverter is in "standby" state.

■ When the input supply exceeds the pre-set limits, the 5000-E will immediately re-transfer to online mode operation ensuring the connected load remains fully protected against disturbances in double conversion mode.

>> Achieving 99% Efficiency in ECO mode

Efficiency

Series Modular Uninterruptible Power System

SIELEnergy Systems

■ High power density of up to 300kVA per cabinet, 50%footprint saving.

■ Front accessible maintenance.

■ Back-to-wall installation (50-200kVA).

■ Top/bottom cable entry compatible.

>> Small Footprint and Easy Construction

■ Automatic switching between float charging and averagecharging and temperature compensation.

■ Battery hibernation design to avoid long-term floatcharging, which improves battery service life greatly.

■ Battery failure pre-alarm.

■ Flexible battery configuration: 32-50 batteries per stringallow customers to remove a faulty battery instead ofreplacing it.

>> Intelligent Battery Management, Extending Battery Life-Span

■ THDi0.99 reduce the pollution to power grid and lower the expense on power distribution componentsincluding cables, breakers, etc.

■ Power walk-in technology boost the ratio of UPS capacity to D. G. capacity to 1:1.1.

>> Reduced Costs On Power Distribution System

Series Modular Uninterruptible Power System

SIELEnergy Systems

φ

■ The 5000-E series is optimised to meet the demands of today's high PF loads.

Systems have an output power factor of 1. and are fully compatible for supplying ‘Capacitive’ or ‘Inductive’ loads having a PF of >0.5 without further de-rating.

>> Load Compatibility

■ No de-rating at 400 to ensure power continuity.

■ Conformal coating on PCB, improving adaptability to dustyor salty spray environment.

>> High Environment Adaptability

■ 138-485 Vac wide input voltage range to minimize batteryuse: 485-305Vac for 100% load; 305-138 Vac for 100%-40% load (de-rating linearly).

■ 6 kV/5 kA surge protection.

>> High Grid Adaptability

■ Redundant design for energy control unit & communicationbuses to eliminate single points of failure.

■ Fault-tolerant ventilation system:.

>> True Redundant Design

Series Modular Uninterruptible Power System

SIELEnergy Systems

Value & Features

High availability, warning and troubleshooting

■ Pre warning of faults and risks improves IDC availability.

■ Rapid faults location, virtual inspection.

Smart interaction, energy saving

■ Dynamic PUE management.

■ Optimization of power and cooling services.

Rapid deployment, one -button launching

■ Pre-configured software and parameters, one-button launch.

■ Parameters of AC and UPS loading.

Easy visualization maintenance in 3D view

■ The 3D design tool realizes 3D visual maintenance.

■ Dynamic 3D display of site temperature, eliminating hot spots.

■ iManager NetEco 1000U can run on the Windows operating system and can be accessed through a web browser. The iManagerNetEco 1000U enables you to monitor the key performance indicators (KPIs) and alarms of the UPSs in real time. In addition, itenables you to remotely control and manage the UPS's. This increases the centralized management and remote operation andmaintenance capabilities for the UPSs. NetEco 1000U supports connection through USB Data lines, RS232 cable, or network cable.

>> NetEco 1000U Introduction

■ NetEco is a new generation data centre management

System. It manages the real-time data and status of datacentre infrastructures, including power, environment, video,and door status and generates alarms if fault arise.

■ NetEco displays data centre layouts and data reports forcustomers to easily query equipment status, and provides astandard platform to apply to all data centre solutions dueto its flexible configuration, smooth capacity expansion, andhierarchical management.

>> NetEco 6000 Introduction

Series Modular Uninterruptible Power System

SIELEnergy Systems

50kVA power module - 3U

Static bypass module

Energy control module

Monitoring unit with built-in SNMP and RS485

Mechanical frame

Maintenance bypass switch

7-inch Liquid Crystal Display (LCD)

Dust filter.

Series Modular Uninterruptible Power System

SIELEnergy Systems

Units shown configured as FC version

>> Dry Contact CardThe dry contact card allows the UPS to control and monitor theswitch state of BCB box and implement the EPO.

>> Power ModuleThe Power module with rated capacity of 50 kVA/kW is based on TrueOn-Line Double Conversion topology.

Its dimensions are 130 mm (H) x 442 mm (W)x 620 mm (D).

>> Bypass Module

The bypass module provides an automatic and instantaneoustransfer of the load to mains supply in the event of an overloador internal fault occurring.

The bypass module of the 5000-E series feature a fully ratedswitch to suit the frame capacity.

>> Energy Control Module

The ECM supports intra-rack parallel CAN communication and inter-rackparallel CAN communication. The intra-rack load-share control andinter-rack load-share control are isolated at the ECM to achieve betterexpandability.

>> iBox/iBat

Supports wireless transmission of individual battery block voltage,resistance (impedance) and temperature.

SIELEnergy Systems

Antiseismic kit Reinforces the cabinet so that the cabinet meets the requirements of 9 degree seismic fortification intensity.

IP21 component Prevents water from dropping into the cabinet, protecting the cabinet to IP21.

Top outlet kit If you need to install the cabinet against the wall, install a top outlet kit to meet heat dissipation requirements.It's suitable for 50-200kVA.

ECM extended subrack Install this subrack when the UPS5000-E is equipped with a back-feed protection card and dry contact extended card.

Top entry cabinetInstall a top entry cabinet to meet the requirements for routing cables from the top of the UPS5000-E cabinet.It is suitable for 200-300kVA.

Ambient temperature andhumidity sensor

Battery temperature sensor can detect the battery temperature and provide reference for temperaturecompensation when float-charging.

Battery temperature sensor Feedbacks real-time temperature and humidity data to dynamic environment monitoring system.

>> Dry contact extended card (Optional)The dry contact extended card provides five relay dry contact outputsand five signal input ports. The card implements additional alarm andcontrol functions to meet customer requirements.

>> Back-Feed Protection Card (Optional)The back-feed protection card sends signals to trigger alarm signalsor quickly disconnect the feedback loop

>> Battery Ground Fault Detector (Optional)The battery ground fault detector detects battery ground fault and sendsalarm signals when the ground leakage current exceeds the thresholdvalue.

>> Battery Monitoring Unit (Optional)Battery monitoring unit supports detection about the voltages, chargeand discharge currents, and temperatures of 24 batteries with a ratedvoltage of 2–12 V DC.

Series Modular Uninterruptible Power System

SIELEnergy Systems

MainsInput

Input Wiring 3Ph+N+PE

Rated Voltage 380/400/415Vac

Voltage Range 138-485 Vac (305-485 Vac for 100% load; 138-305 Vac for 40%-100% load)

Input Frequency 40-70 Hz

Total HarmonicDistortion THDi

SIEL Energy Systems LtdSIEL House, Unit E Draycott Business ParkCamGLoucestershire. GL11 5DQ

Telephone: 0845 130 6118

mail:enquiries@sielenergy.co.uk

www.sielenergy.co.uk

SIELEnergy Systems