SICAM PAS CC V7.0 SP1 can also be used as a control and monitoring system for SICAM 1703 IEC 61850 devices (for example, SIPROTEC 4)

SICAM PAS CC as C&M System for SICAM 1703 For communication with SICAM 1703, the protocol IEC 60870-5-104 or IEC 61850 can be used. Both TOOLBOX II V5.0 and SICAM PAS CC V7.0 SP1 support exchange of configuration data. Features: SICAM PAS CC as a C&M System

Can be used for TM 1703 mic, TM 1703 emic, TM 1703 ACP, and AK 1703 ACP

Can be used for several 1703 stations and supports the usage with redundant AK 1703 ACP.

When using IEC 60870-5-104, a TOOLBOX II project with several stations can be imported; for communication via IEC 61850, up to 8 TOOLBOX II projects can be imported.

SICAM PAS CC can be used as a redundant system and as a Client/Server system.

SICAM PAS CC as a C&M System for Devices with Communication Standard IEC 61850 Devices communicating via IEC 61850 can be connected directly to SICAM PAS CC. For this usage, SCL files (SCD, ICD, CID) are imported. The files are created, for example, with the DIGSI 4 System configurator. Features:

SICAM PAS CC as C&M system for IEC 61850 devices, for example, SIPROTEC 4 and third-party devices.

Up to 8 SCL files can be imported. SCD files can contain several devices. Communication with up to 500 devices is supported. The used license limits the number of supported information objects.

SICAM PAS CC can be used as a redundant system and as a Client/Server system.

Answers for infrastructure.

SICAM PAS CC V7.0 SP1 well-considered control and montoring

SICAM PAS CC V7.0 SP1

SICAM PAS Stations

PAS Protocol IEC 60870-5-104 or IEC 61850

SICAM 1703 Stations IEC 61850 Devices

IEC 61850

3rd partyIED

NEW NEW

SICAM PAS CC V7.0 SP1

SICAM PAS CC for SICAM PAS, SICAM 1703 and IEC 61850 Devices With SICAM PAS CC V7.0 SP1, a common control and monitoring system for the systems SICAM PAS, SICAM 1703 and for IEC 61850 devices can be realized. The supported number of information objects limits the number of devices and systems. (↔ licenses depending on number of information objects)

Compatibility and Operating System

The usage of SICAM PAS CC V7.0 SP1 for the new target systems is supported from SIMATIC WinCC V7.0 and later. Together with SIMATIC WinCC V7.0 SP2, the following operating systems are also supported:

Windows 7 (32 bit) Windows 2008 Server SP2 (32 bit)

Ordering Data

For the usage as a control and monitoring system for SICAM 1703 systems, the same order numbers are used as for the target system SICAM PAS. (independently from the used communication protocol IEC 60870-5-104 or IEC 61850)

SICAM PAS CC Runtime 6MD550_-0_P00-7AA0 (incl. SIMATIC WinCC) Runtime & Configuration 6MD551_-0_P00-7AA0

128 information objects ………..1 512 information objects ………..2 2048 information objects ………..3 8192 information objects ………..4 65536 information objects ………..5 Without SICAM Valpro ……………A With SICAM Valpro ……………B

SICAM PAS CC Runtime 6MD5500-0_P00-7BA0 (excl. SIMATIC WinCC) Runtime & Configuration 6MD5510-0_P00-7BA0

Without SICAM Valpro ……………A With SICAM Valpro ……………B

For direct connection of IEC 61850 devices (importing SCD, ICD, and CID files), the following order number is necessary additionally to the MLFB mentioned above:

SCD import for direct

communication via IEC 61850 6MD5500-0EP00-7AA0

Siemens AG Customer Support Center Energy Sector Tel.: +49 180/524 70 00 Power Distribution Division Fax: +49 180/524 24 11 Energy Automation (Charges depending on provider) Postfach 4806 E-Mail: support.energy@siemens.com 90026 Nürnberg, Germany www.siemens.com/energy © 2011