SEAL DIMENSION AIR MACHINE DIMENSIONS POWER REQ.MODEL WIDTH x HEIGHT REQ. W x H x L VOLTS PHASE AMPS WEIGHT

ES35 35 in x 19 in 3.5 CFM 69 in x 66 in x 101 in 220v 1 10 2000 lbs.

88.9 cm x 48.26 cm 3.5 CFM 175.26 cm x 167.64 cm x 256.54 cm 907.20 kg

ES50 50 in x 19 in 3.5 CFM 84 in x 66 in x 149 in 220v 1 15 2500 lbs.

127 cm x 48.26 cm 3.5 CFM 213.36 cm x 167.64 cm x 378.46 cm 1134 kg

ES70 70 in x 19 in 3.5 CFM 104 in x 66 in x 149 in 220v 1 20 3000 lbs

177.8 cm x 48.26 cm 3.5 CFM 264.16 cm x 167.64 cm x 378.46 cm 1360.8 kg

All above information is based on equipment with standard features, and a hot knife seal system(Reynolds DuoSeal

®System).

For all sleeve wrappers being ordered with options - see quote for power requirements.

Shrink PackagingEquipment

for the Shrinking World

FOR THE SHRINKING WORLD

EASTEYEASTEY ENTERPRISES, INC.

21480 147TH AVE. NO.ROGERS , MN 55374

PHONE: 763/428-4846FAX: 763/428-8361

TOLL FREE: 800/835-9344www.eastey.comeastey@dg i .net

Copyr ight © 1999 Eastey Enterpr ises , Inc. , Al l R ights Reser ved

EASTEY ENTERPRISES AUTOMATIC LEFT ANGLE SLEEVE WRAPPER AND SHRINK TUNNEL

With optional powered infeed conveyor

CHOOSE AN EASTEY COMPANION SHRINK TUNNEL.SELECT FROM A VARIETY OF EASTEY SHRINK TUNNELS.

DEALER IMPRINT

BU

ILT RIG

HT - P

RIC

ED R

IGH

T

Automatic Belt In / Belt Out

ES-50A

ES SLEEVE WRAPPERSMANUAL • SEMI AUTOMATIC • AUTOMATIC

Whether you are wrapping large products, or multi-packs combiningseveral products as one, EASTEY ENTERPRISES Sleeve wrappers are theright choice to do the job. By using 2” x 4” x 1/4” steel tube for the mainframe and 12 & 14 gauge steel, these ruggedly built machines will last foryears. The single wound film is delivered by two (top and bottom) powered film unwind systems and the film is sealed by adependable hot knife. After passing through the shrink tunnel a securepackage with an open end circle of film is produced. Sleeve Wrapperseal areas of 35”, 50” & 70” are available.

Prices include factory installation - call for details.B

UIL

T R

IGH

T -

PR

ICED

RIG

HT

Shrink Packaging Equipment for the Shrinking World

Made in the USA

®

OPERATION SEQUENCEMANUAL

INLINEAn operator pushes the product into the film and into the sealarea. A dead plate is mounted in the seal area to help stabilizethe product as it is being sealed. Two buttons are pushed. Theseal head comes down and a seal is made. As the next prod-uct is pushed into the seal area, the previous product is pushedoff the dead plate on to a powered discharge conveyor, whichadvances the product to the shrink tunnel.

SEMI AUTOMATICRIGHT OR LEFT ANGLE

An operator places the product in front of a “Pusher Arm”, in theinfeed area. Two buttons are pushed, the pusher arm pushesthe product into the seal area and the operator is free to placethe next product in the infeed area. The seal head does notactivate until the pusher arm has cleared the seal area on itsreturn stroke. A dead plate is mounted in the seal area to helpstabilize the product as it is being sealed. The product is pushedoff the dead plate on to a powered discharge conveyor, whichadvances the product to the shrink tunnel.

AUTOMATICINLINE

Products are delivered on a customer supplied powered infeed conveyor. They should be spaced apart so the electric eye cansee between the product. An electric eye sees the product asit is entering the seal area, when the product has cleared theeye and is in the seal area completely, both the infeed and dis-charge conveyor stop. The seal head comes down, and theseal is made. After the seal is made the powered dischargeconveyor advances the product to the shrink tunnel.

AUTOMATICRIGHT OR LEFT ANGLE

Products are delivered on a customer supplied powered infeedconveyor. The infeed conveyor can be right or left mounted.Products should be “choke fed” so once the pusher is activatedit can easily strip the product from the conveyor and advanceit through the film, on to the dead plate over the outfeed con-

veyor. The pusher retracts, the seal head comes down andthe seal is made.When the seal head rises the pusher canadvance the next product through the film, pushing theprevious product off the dead plate onto a powered dis-charge conveyor, which advances the product to theshrink tunnel. Custom product guides may be required forsome products.

INLINE ES35Shown with optional remotestart station

STANDARD FEATURES & OPTIONSSEAL WIDTHS IN 35”, 50” OR 70”

MANUAL STANDARDFEATURES

INLINE• Dead plate infeed

parallel with seal bar, total length of infeed is 18”

• Seal activation buttons on the end

• Dead plate mounted after seal bar to stabilize products.

• Powered discharge conveyor belt 30” wide 48” long (35” model)

• Electrics on left side• Adjustable Seal Head Height• Upper & Lower Powered Film

Unwind• Hot Knife Seal Head • Casters & Levelers

SEMI-AUTOMATICSTANDARDFEATURES

RIGHT OR LEFT ANGLE• Non-powered roller infeed, with

pneumatic product pusher activation buttons mounted on the same side of the machine as the product being fed.

• Dead plate mounted after seal bar to stabilize products.

• Powered discharge conveyor belt 30” wide 48” long (35”model).

• Electrics on same side as activation buttons.

• Adjustable Seal Head Height• Upper & Lower Powered Film

Unwind• Adjustable Pusher Return

Length Stroke• Hot Knife Seal Head• Infeed Product Guides where

necessary• Casters & Levelers

AUTOMATICSTANDARDFEATURES

IN LINE• Powered infeed and discharge

conveyor belts are 30” wide 48”long (35” model)

• Electrics on left side.

RIGHT OR LEFT ANGLE• Right or left angle non-powered

roller infeed, with pneumatic product pusher. Limit switch in pusher area to start cycle once the product has made the switch.

• Dead plate mounted after seal bar to stabilize the products.

• Powered discharge conveyor belt 30” wide 48” long (35” model).

• Adjustable Pusher Return Length

STANDARD FEATURES FORBOTH IN LINE & RIGHT OR LEFTANGLE• Adjustable Seal Head Height• Upper & Lower Powered Film

Unwind• Hot Knife Seal Head • Infeed Product Guides where

necessary• Casters & Levelers.

USER FRIENDLY ACCESS ELECTRICAL PANELFOR EASY MAINTENANCE

Shown with optional dual film rack.