Shri Gajanan Maharaj Shikshan Prasarak Mandal’s,

SHARADCHANDRA PAWAR COLLEGE OF ENGINEERING

Dumbarwadi [Otur], Tal- Junnar, Dist- Pune 410504

REPORT ON DIFFERENT TYPES OF ACTIVITIES PERFORMED BY

COLLEGE FOR STUDENTS

ACADEMIC YEAR 2015-16

1. Four Day Workshop on PLC & SCADA during 23/03/2016 TO

26/3/2016

The Department of Electronics & Telecommunication Engineering, Sharadchandra Pawar

College of Engineering, Savitribai Phule Pune University, Pune. Organized “four day Workshop

on PLC & SCADA during 23/03/2016 TO 26/3/2016.

The main objective of this WORKSHOP was to make the aspiring engineers acquainted

with the conceptual as well as practical knowledge of the Industrial Automation & latest

technologies being used to achieve industrial automation.

The idea of organizing this workshop was to teach the basic fundamentals of automation

in the students and provide them with a platform to work on, In The Near Future. The Most Used

Guiding Force Behind an Automated Industrial Plant Is A “Programmable Logic Controller”

Generally Known As A PLC. PLCs Along With Certain Other Necessary Ingredients Like

Sensors, Motors, Actuators, Valves, Conveyors, Boilers, SCADA Systems, Computers & Many

More, Makes A Real Automated Manufacturing Plant.

All the faculty and staff members actively participated in the event to make it a grand

success.

Detail Report Of Workshop:

Title: (PLC system & SCADA software)

Resource person: 1.Prof. Narendra Lagate 2. Prof. Sane Adwitiya; Sr. Project Engg, Prolific

Systems & Tech. Pvt. ltd. Pune.

Coordinator: Prof. Chinchole M.G (HOD E&TC Dept.)

About workshop: The Four Day intensive workshop on Industrial automation product (PLC

System & SCADA software) has been conducted by Prolific Systems & Tech. Pvt. ltd. Pune to

involve students in a cohesive drive with the academia and industry towards excellence in

automation product technology. This workshop was an attempt to cover material relevant to

giving students necessary knowledge and skill set to appreciate the rapid changing scenario in

automation systems and take advantage of this in their future career. Practical/laboratory sessions

are held, which will supplement the knowledge disseminated during the lecture sessions with

adequate hands on experience. Workshops support in instructor-lead, lab-intensive courses

focused on the practical application of technologies through the facilitation of a project-related

lab.

Duration: It’s a four day workshop. From 23/03/2016 TO 26/3/2016. In this five-day course,

student gained valuable hands-on experience.

How many students have attended this workshop: 77?

Software Tools: Wonder ware’s in Touch

Skills Gained

After completing this workshop, students are able to:

Create and design new automation model by using PLC programming logic.

Interface external peripheral by using SCADA software.

Topics covered in this Workshop:

Session I: Presentation on Recent Trends in Industrial Automation & PLC-SCADA

Introduction To Automation

Why We Need Automation

Where Automation?

Evolution In Industrial Automation (A Brief History)

Different Type Of Industrial Control Mechanisms)

Introduction To PLCs

PLC Advantages Over Microcontrollers

Area Of Applications

DATA Flow During Automation

Motor Drives Introduction & Their Need

Sensors Introduction & Their Need

HMI Introduction & Its Need

SCADA Introduction& Its Need

Session II: Detail study of PLC & SCADA

PLC

SCADA

Session III: PLC I/Os Basics, Burning & Interfacing Concepts

Allen Bradley & Rockwell Automation’s Details

Brief Description To Input/ Output Pins Of Micrologix-1000

Ladder Diagram Basics

Introduction To RSLogix

Downloading A Ladder Program In PLC Using RSLinx.

How To Take Input From Panel

How To Give Output To Panel

Running First PLC Application.

Session IV: Hands on PLC Training Kit

Participants will perform hands on PLC training Kit.

Photographs:

2. Conduction of Seminar on Computer Networking

(Cisco Certification) dated on 12/02/2016.

Seminar on “Computer Networking” was successfully organized by Department of

Electronics And Telecommunication Engineering, Sharadchandra Pawar College of Engineering,

Otur, Pune, on 12/02/2016 and conducted by GATS ACADEMY PUNE. The Seminar was

organized for Undergraduate students and the contents covered were beneficial as per the

syllabus prescribed by SPPU . Brief report of the day is given below with the feedback at the

end:

Seminar Details:

Session on basics of Infrastructure establishment in Wireless Sensor Network:

In the first session, resource person Dr. Nilima Narad started her discussion with

concepts of Wireless sensor network basics and their applications. She also explained the use of

sensors in our day today life. She covered the concepts related to infrastructure establishment

parameters. The first session focused more on understanding the infrastructure required to

establish wireless sensor network.

Session on establishment in Wireless Sensor Network:

In the second session, resource person briefed about the localization of sensor nodes,

sensor task control. Later she covered many important concepts regarding operating systems

used for wireless sensor network.

Seminar Objectives:

The objectives of the sessions were to enlighten the students with the different subjects

pertaining to Computer Science & Engineering, to equip them with hands on session on CPU

Assembling & WINDOWS 8 operating system installation and to acquaint them with latest

Technology advancements.

Photocopy:

3. A Seminar on “How to Crack IES, GATE, and PSUs in first Attempt”

Dated on 12/02/2016.

Seminar on “How to Crack IES, GATE, and PSUs in first Attempt “was successfully

organized by Department of Electronics And Telecommunication Engineering, Sharadchandra

Pawar College of Engineering, Otur, Pune, on 16/02/2016 and conducted by ACE academy

Pune. The Seminar was organized for Undergraduate students and the contents covered were

highly beneficial. A Brief report of the day is given below with the feedback at the end:

Seminar Details:

The Seminar began with a brief introduction of the resource faculty Mr. Tushar P. Patil.

The session began with a brief overview of the importance of competitive exams and how

conceptual knowledge of students is important for attaining success at these exams.

A prime motto of imparting quality education in engineering and molding the engineering

students to crack competitive examinations. Who aspire to get into IISc/IITs after B.Tech and for

those who cherish the dream of joining prestigious jobs through IES/PSUs.

Photocopy:

4. Conduction of Guest Lecture on “Personality Development and

Confidence Building” Dated on 25/01/2016.

Guest lecture on “Personality Development and Confidence Building” “was successfully

organized by Sharadchandra Pawar College of Engineering, Otur, Pune, on 25/01/2016.

The Guest lecture was organized for Undergraduate students and the contents covered

were highly beneficial. A Brief report of the day is given .

Details:

A Guest lecture on Personality Development and Confidence Building was organized on

25/01/2016. Mr. Tushar P. Patil. Was the resource person working for Smart Personality

Development Academy Pune. He enlightened and guided the students in various career

aspects where the students can aspire and initiate their career.

He shared his experience in the area of Journalism and inspired the students to pursue

career in the field of Journalism. The presentation and interaction of the speaker was very

effective, wherein he showed many related visuals. The students interacted

enthusiastically and the resource person answered their queries and cleared their doubts.

Conducted three modules for Interview skills for the students in which he initially

introduced the students to the real life time situations that they will face and how they

need to prepare themselves for the same. He stressed on the need to understand and learn

the art of writing email conversations, how to present oneself over the phone during the

interview sessions and also provided a detailed insight into resume writing techniques.

He also emphasized the significance of personal grooming, body language and postures,

etiquettes and mannerism to be adopted before appearing for an interview. The session

ended with an interactive question answer session.

Photocopy:

5. Conduction of Guest Lecture on “Embedded System And RTOS” Dated

on 06/10/2015.

Guest lecture on “Embedded System and RTOS” was successfully organized by Department of

Electronics And Telecommunication Engineering, Sharadchandra Pawar College of Engineering,

Otur, Pune, on 06/10/2015. The Guest lecture was organized for final year students and the

contents covered were highly beneficial. A Brief report of the day is given below with the

feedback at the end:

Details:

A Guest Lecture on Embedded system and RTOS (Real Operating System Design by the expert,

Prof. Mangesh D. Thakur from Sapkal College of Engineering, Nashik, who provided

information about the basics of Operating System and Embedded Operating System; according

to the syllabus he covered each and every important point which will help the students to gain

theoretical as well as practical knowledge. He also guided students on RTOSD (Real Time

Operating System Design) which is one of the theory subjects for the students and suggested to

do a detailed study of each unit so that proper knowledge is gained and thus students will find it

easy to write the theory paper. Finally the session ended with a vote of thanks by the HOD.

Photographs:

6. Conduction of Guest Lecture on “Electronic Devices And Circuits”

Dated on 06/10/2015.

Guest lecture on “Electronic Devices & Circuits” “was successfully organized by Department of

Electronics And Telecommunication Engineering, Sharadchandra Pawar College of Engineering,

Otur, Pune, on 06/10/2015. The Guest lecture was organized for Second Year students and the

contents covered were highly beneficial. A Brief report of the day is given below with the

feedback at the end:

Details:

A Guest Lecture on Electronic Devices And Circuits by the expert, Prof. Vivek Srivastav from

Dr. D. Y Patil College of Engineering, Lohgaon, who provided A strong intuition and insight of

the dynamic of electronic components like diodes, BJTS and MOSFETS which can be used to

design and optimize circuits performance. He also explains the Detailed of DC and AC analysis

of BJT and MOSFETs especially for small signal analysis. According to the syllabus he covered

each and every important point which will help the students to gain theoretical as well as

practical knowledge.

7. Conduction of Guest Lecture on “Career Guidelines in Electronics &

Telecommunication Engineering” Dated on 06/10/2015.

Guest lecture on “Career Guidelines in Electronics and Telecommunication Engineering” was

successfully organized by Department of Electronics And Telecommunication Engineering,

Sharadchandra Pawar College of Engineering, Otur, Pune, on 22/09/2015. The Guest lecture was

organized for Second, Third & Final Year students and the contents covered were highly

beneficial. A Brief report of the day is given below with the feedback at the end:

Details:

A Guest Lecture on Career Guidelines in Electronics and Telecommunication Engineering by the

expert, Prof. Sudhir U. Gaikwad, from Ahemadnar who provided a strong intuition and insight of

the dynamic of current employability status of engineering students. He highlighted the growth

of VLSI and Embedded Industry, which has increased demand for fresh enginers. His talk also

focused on the recent industry trends in core engineering field. The talk also provided the student

a platform for sharing their thought and was endowed with proper guidance regarding all the

aspects of career in core VLSI and Embedded Field.

8. Industrial Visit To “Door-darshan Center, Sinhgad, Pune” on

06/01/2016.

Industrial visit To “Doordarshan Center, Sinhgad, Pune”was successfully conducted by

Department of Electronics And Telecommunication Engineering, Sharadchandra Pawar College

of Engineering, Otur, Pune, on 06/01/2015. The Industrial visit was organized for Final Year

students and the points highlighted during visit were highly beneficial. A Brief report of the day

is given below with the feedback at the end:

Industrial Visit Details:

Visit was organized with the prior permission and guidance of Honorable Principal Dr. G. U.

Kharat. It was supported by Respected HOD Mr. M. G. Chinchole, Departmental Visit

Coordinator Mr. R. S. Parbat and along with Department T&P coordinator Mr. R. S. Bansode.

Total 41 students and 3 staff visited the Transmitter Section of Doordarshan Center,

Sinhgad, Pune.

The details of Journey are as follows:-

1. We started travelling from Otur Bus stand at Morning 6.45 a.m. on 06th

January 2016.

2. We reached to Sinhgad, Pune at morning 10.45 a.m. 06th

January 2016

3. Then they started their sessions on the Morning 11.00 a.m. of the same day.

4. Visit was completed at 03.00 p.m. we completed the visit of Doordarshan and we were back to

the Otur at 08.00 p.m.

The one day visit was organized with prior permission of The Deputy Director, Engineering

Department, Doordarshan Center, Sinhgad, Pune, on 16th

December 2015. The students got

benefited in terms of the technical details provided by the organization on satellite

communication and audio & video transmission techniques.

Visit was conducted for about 1 hour and 30 min. sessions which covered the following details:-

1. Broadcast Station

2. Earth Station

3. Studio

Mr. S. U. Dharmadhikari (Asstt.Engg.) explained about the different frequency band i.e. HF,

VHF, UHF etc, Transmitter & Receiver, uplink & downlink frequency, Line of sight, analog &

digital signal, resonance, microwave communication, satellite communication, waveguide,

multiplexing, RF, digital encoding, quantization, noise, earth station, power supply, signal

transmission, and many more such devices and principles.

Photographs:

9. Two Month Saturday-Sunday (70hrs) Workshop on CAD Creo 3.0

Professional Training

The Department of Mechanical Engineering, Sharadchandra Pawar College of Engineering,

Savitribai Phule Pune University, Pune organized “Two month Saturday-Sunday (70hrs)

Workshop on CAD Professional Training” during February 2016 to March 2016.

Workshop Report

Title:- Workshop on Creo 3.0.

Resource Person:- 1. Mr. Yamana Umakant. 2. Mr. Gaurav Sharma(Dysmech Consultancy

Services Pvt, Pune.)

Coordinator:- Dumbre A.A (Assistant Professor)

About the Workshop:-The 70 hrs 2 month intesive workshop on Creo 3.0 has been conducted

by Dsymech Consultancy Services Pvt. Pune to involve students in a cohesive drive with the

academia and industry towards excellence in software knowledge. This Workshop was an

attempt to cover rapid changing scenario in software knowledge and Practice. Practical sessions

are held which will supplement the knowledge during lecture.

Duration:- 70hrs Workshop

Period:- 01/02/2016 to 30/03/2016.

How many students have attended this Workshop:- 50.

Software Tools:- Creo 3.0.

Skills Gained:- After completing Workshop students are able to

Draw complicated shapes.

Animate the assembly.

Draft the objects.

Topics Covered in Workshop:-

Introduction to Creo 3.0 CAD.

Development Phase.

Different Modeling and Design software.

Creo 3.0 Advantages over other modeling software’s.

Basic tools.

Sketching(2D)

Part Modeling(3D)

Design and Modeling of part by using different commands.

Part Modeling

Assembly

Draft

ACADEMIC YEAR 2016-17

1. Report of Workshop on Internet of Things.

The Department of Electronics & Telecommunication Engineering, Sharadchandra Pawar

College of Engineering, Savitribai Phule Pune University, Pune. Organized “Two day Workshop

on “INTERNET OF THINGS” during 07/10/2016 to 08/10/2016.

"If you think that the internet has changed your life, think again. The IoT is about to change

it all over again!” - Brendan O’Brien

Internet of Things is a new revolution of the Internet. A world where the real, digital and the

virtual are converging to create smart environments that make energy, transport, cities and many

other areas more intelligent. A device become a smart device is called IOT. Now a days there are

many android and server based application. In this system, value of sensor (e.g. temperature

sensor, motion sensor, accelerometer sensor etc.) will be shown on GUI or web server or android

application through wireless communication and device will be controlled automatically. Device

will be operated on GSM/GPRS.

All the faculty and staff members actively participated in the event to make it a grand

success.

Detail Report Of Workshop:

Title: Internet of Things

Resource person: 1.Dr.M.U.Kharat 2.Dr. P.R.Deshmukh, 3.Dr. S.B.Wankhade

4. Prof.R.D.Deokar 5.Mr.R.N.Gupta.

Coordinator: Prof. Chinchole M.G (HOD E&TC Dept.)

About workshop:

(What is Internet of Things?)

It’s a global network infrastructure, linking physical and virtual objects using cloud computing,

data capture, and network communications. It allows devices to communicate with each other,

access information on the Internet, store and retrieve data, and interact with users, creating smart,

pervasive and always-connected environments.

The Internet of Things (IoT), sometimes referred to as the Internet of Objects, will change

everything— including ourselves. This may seem like a bold statement, but consider the impact

the Internet already has had on education, communication, business, science, government, and

humanity. Clearly, the Internet is one of the most important and powerful creations in all of

human history. Now consider that Internet of Things represents the next evolution of the Internet,

taking a huge leap in its ability to gather, analyse, and distribute data that we can turn into

information, knowledge, and, ultimately, wisdom. In this context, Internet of Things becomes

immensely important.

Duration: It’s a Two day workshop. From 07/10/2016 to 08/10/2016. In this Two-day course,

student gained valuable hands-on experience.

How many students have attended this workshop: 70.

Software Tools: Rasbian Operating System.

Topics covered in this Workshop:

Day 1

1. Introduction to the Internet of Things

The Internet of Things

The Basics of Sensors & Actuators

Introduction to Cloud Computing

2. The Arduino Platform

The Arduino Open-Microcontroller Platform

Arduino Basics

Arduino Board Layout & Architecture

3. Reading from Sensors

4. Programming fundamentals ( C language )

5. Arduino Programming & Interface of Sensors

Interfacing sensors with Arduino

Programming Arduino

Reading from Sensors

Project 1: Simple LED Program for Arduino

Project 2: Integrating Sensors & Reading Environmental Physical Values.

Project 3: Reading Environmental Values on Android Smartphone.

Talking to your Android Phone with Arduino

Connecting Arduino with Mobile Device.

The Android Mobile OS.

Using the Bluetooth Module

Project 4: Voice Controlled Mini Home Automation using Android Smartphone

Project 5: Control Devices using Localhost Web Server for Home Automation.

Integrating Ethernet Module & Testing DHCP Connection

Creating Program for Localhost Web Server for controlling devices.

Day 2

Project 6: Creating own Android App using MIT App Inventor & controlling Arduino connected

devices.

Project 7: Being Social on Twitter & update status on Twitter through Arduino

Make Electronics Gadget Talk to Internet

Integrating Ethernet Module

Creating App on Twitter

Project 8: Send Voltage & Analog Data on Cloud Server.

Cloud Computing

Communicating with the Cloud using Web Services.

Cloud Computing & IoT.

Popular Cloud Computing Services for Sensor Management.

Project 9: Use Arduino to Upload free data from Environmental Sensors to Cloud Server.

Project 10: Automatically Tweet Sensor Data on Twitter.

Project 11: Receive Automatic Call Notification on Mobile Phone for Burglar Alarm using IoT

Platform.

Project 12: Control Electronic Devices from anywhere across the world using Internet & Mobile

App.

Skills Gained

Current scenario/job opportunities of embedded industries.

Understanding the skill set required in a new employee in embedded industry.

Understanding the robotics future and scope Understanding the different microcontroller

available in the industry & their use.

In-depth knowledge on design, construction and programming concepts involved in

building an autonomous robot Learn & Interact with renowned Industry Experts.

Outcomes of attending the workshop:

What “the Internet of Things” means and how it relates to Cloud computing concepts

How open platforms allow you to store your sensor data in the Cloud

The basic usage of the Arduino environment for creating your own embedded projects at

low cost

How to connect your Arduino with your Android phone.

How to send data to the Internet and talk to the Cloud.

How to update sensor readings on Twitter (Social Networking Sites).

Control a Relay Switch by texting from your Phone.

Conclusion: In this Workshop, how machine to machine connectivity is rapidly growing

everywhere was discussed. Also the business benefits for connected devices and assets for

remote location connectivity are instantly cleared.

Photographs:

2. Guest Lecture on Engineering Graphics-I for First Year Students

Resource Person: Mr.D.J.Sonawane, Sahyadri college of Engineering, Rajuri

Subject Details: Engineering Graphics-I (F.E .)

Duration: 12 Dec.2016 to 14 Dec.2016 (18 Hr.)

Objectives of Guest Lecture:

To study orthographic projection

To study isometric projection

Topic Covers in Guest Lecture:

1. Basics of Orthographic Projection (Theory)

2. Orthographic Projections by First Angle Method (Problems)

3. Sectional Orthographic Projection (Problems)

4. Basics of Isomeric Projection (Theory)

5. Isomeric Projections (Problems)

1. Guest Lecture on Theory of Computation on dated 06/08/2016

The Guest Lecture on Theory of Computation was conducted by Department of Computer

Engineering, Sharadchandra Pawar College of Engineering, Otur on 06/08/2016. The Guest

lecture was organized for UG students. Mr. Swarup Kshastriya from Tech Mahindra Pune

delivered guest lecture on Theory of Computation.

Guest Lecture Details

In the first session, resource person give brief introduction of TOC, and started the basic

concepts of formal Language Theory. In this session he explains regular expression, DFA, NFA

and Grammars.

In the second session was based on Turing Machine and push down automata.

Seminar Objective:

The main objective of lecture is to give fine tricks to the students to solve problems and

applications of TOC in industry

Photographs:

Along with these technical events we also organized various cultural events like gathering,

Sports, Ganapati Utsav, Dahihandi, Trip, Alumni & Farewell function and Freshers welcome….