Upload
vuongliem
View
214
Download
1
Embed Size (px)
Citation preview
40mm
45mm
50mm
Large Stem
Medium Stem
Small Stem
Stainless steel rods within stems provide added mechanical strength
REMEDY® SHOULDER SYSTEM
SHOULDER MODULARITY
REMEDY® Shoulder Spacers:• Single-use medical
devices/ethylene
oxide sterile
• Formed with bone
cement (PMMA)
and gentamicin
REMEDY® MODULAR
STEMS
uuu
Variable head and neck design allows desired placementand positioning up to 9mm
2
REMEDY® MODULAR
HEADS Head sizes interchangeable
with stems for surgical flexibility
The REMEDY® Shoulder Spacer is part of the treatment foreseen in a two-stage procedure performed in the event
of permanent prosthesis infection. The REMEDY® Shoulder Spacer implant is intended for temporary use only
(180 days or less). It allows basic joint mobility and releases antibiotics into the joint
area to protect the implant from bacterial colonization. A second surgery will
be required at a later date to remove the REMEDY® Shoulder Spacer and
replace it with a permanent shoulder joint implant.
Stainless steel rod reinforces the humeral stem
Stainless steel rods within stems provide added mechanical strength
HIP MODULARITYThe REMEDY® Hip Spacer is part of the treatment foreseen in a two-stage procedure
performed in the event of permanent prosthesis infection. The REMEDY® Hip Spacer
implant is intended for temporary use only (180 days or less). It allows basic joint mobility
and releases antibiotics into the joint area to protect the implant from bacterial colonization.
A second surgery will be required at a later date to remove the REMEDY® Hip Spacer and
replace it with a permanent hip joint implant.
Short Stem Small
Short StemMedium
Short StemLarge
Long StemSmall
Long Stem Medium
Long Stem Large
60mm
54mm
46mm
REMEDY® MODULAR HEADS
REMEDY® MODULAR STEMS
REMEDY® Hip Spacers:• Single-use medical
devices/ethylene
oxide sterile
• Formed with bone
cement (PMMA)
and gentamicin
uu
u
Variable head and neck design allows desired placementand positioningup to 17mm
Stainless steel rods within stems provide added mechanical strength
Stainless steel rod reinforces the femoral stem
3
REMEDY® HIP SYSTEM
Head sizes interchangeable with stems for surgical flexibility
Femoral Component
54mm(Small)
TibialComponent
60mm(Small)
Tibial Wedge60mm - Width10mm - Height
(Small)
KNEE INTERCHANGEABILITYThe REMEDY® Knee Spacer is part of the treatment foreseen in a two-stage
procedure performed in the event of permanent prosthesis infection. The
REMEDY® Knee Spacer implant is intended for temporary use only (180 days
or less). It allows basic joint mobility and releases antibiotics into the joint area
to protect the implant from bacterial colonization. A second surgery will be
required at a later date to remove the REMEDY® Knee Spacer and replace it
with a permanent knee joint implant.
REMEDY® Knee Spacers:• Single-use medical
devices/ethylene oxide sterile
• Formed with bone cement
(PMMA) and gentamicin
REMEDY® LARGE MODULAR KNEE
L
REMEDY® SMALL MODULAR KNEE
S
Femoral Component
74mm(Large)
TibialComponent
80mm(Large)
Tibial Wedge80mm - Width10mm - Height
(Large)
Femoral Component
64mm(Medium)
TibialComponent
70mm(Medium)
Tibial Wedge70mm - Width10mm - Height
(Medium)
REMEDY® MEDIUM MODULAR KNEE
M
TOTAL SYSTEM INTERCHANGEABILITY
M
L
M
L
S
M
S
S
L
L
M
S
S
L
L
S
M
M
• 65% of cases result in different
size femur and tibia*
• 35% of cases use a tibial wedge*
* Internal OsteoRemedies data4
REMEDY® KNEE SYSTEM
Size XL Femoral Component also available upon request
TOTAL SYSTEM INTERCHANGEABILITY
ELUTION OVERVIEW
ANTIBIOTIC TREATMENT PLAN Antibiotics In Spacers: REMEDY® Spacers – 4.8% Gentamicin In Sulfate
Molds – Various/Inconsistent
Antibiotics In Cement For Fixation Same With Molds Or REMEDY® Spacer System
Systemic Antibiotic Treatment Plan Same With Molds Or REMEDY® Spacer System
1
2
3
5
REMEDY® data supported by third-party analysis and referenced in available testing report
Data of Palacos® R+G and Simplex PTM Tobramycin are taken from: Moojen et al., 2008 - J. Arthroplasty
Palacos is a registered trademark of Heraeus Medical GmbH
Simplex P Tobramycin is a trademark of Stryker®
Weeks
20
40
60
80
100
120
140
160
180
0 1 2 3 4 5 6 7 8 9
Palacos R+G (51mm Head)
REMEDY Hip With Short Stem (54mm Head)®
REMEDY®
Intra-Op Molds
205 mg/7.2% AB Release
27 mg/2.1% AB Release
24 mg/0.9% AB Release
6 Months
REMEDY Hip w/ Long Stem (54mm Head)®
Simplex P Tobramycin (51mm Head)
200
150 mg/8.5% AB Release
REMEDY Knee w/ Medium Femur, Tibia, Insert ®
REMEDY® ELUTION PROFILE OF ANTIBIOTICS
REMEDY® SHOULDER SPACER TECHNIQUE
6
STEP 1In accordance with the existing shoulder manufacturer’s tech-nique, prepare the infected joint space by first removing the shoulder prosthesis and any PMMA cement, if present, and any hardware that may be a reservoir of infection.
STEP 2Using the Shoulder Spacer Trials and templates, select the appropriate size humeral stem and humeral head components.
STEP 3
Once the appropriate humeral head size is selected, open the package and remove the monomer vial.
Carefully, break the vial open and pour all the monomer into the screw opening of the humeral head.
STEP 4Remove the plastic cap, pour the remaining monomer out and place the head on the humeral stem. Begin turning the head until the desired offset and length are achieved. Approximate working time for the head is 10 to 15 minutes.
WARNING: The humeral head must be seated past the Safety Line marked in purple on the stem thread.
On the stem trials, the purple line is designated with a missing thread on the stem trunnion.
STEP 6Insert the humeral stem (with head properly affixed) into the canal to the desired position.
Continue to prepare the joint space with aggressive debridement, pulse lavage and other standard practices for preparing the infected joint space.
COVER CAP
Insert and seal the hole with the plastic cover cap supplied with the humeral head. Shake the head for 60 seconds to ensure all of the threads within the head are wet with monomer.
TRIAL
TEMPLATE
SHOULDER SPACERRSSLG
®
6800 Poplar Avenue • Suite 120 • Memphis, TN 38138901.453.3141 • [email protected] • OsteoRemedies.com
OsteoRemedies and corporate mark are registered trademarks of OsteoRemedies, LLC ©2015 RSSLG 11/15
Important Note: Once the head location is selected, be sure not to continue to adjust the head location as this could affect the fixation between the head and the stem.
STEP 5Using UNITE® AB Bone Cement, or other FDA-cleared PMMA, apply cement to the proximal aspect of the stem. The use of bone cement is compulsory to avoid rotation and to limit the risk of dislocation or spacer loosening.
Note: For additional fixation to the stem the remaining offset space and threads of the stem, up to the humeral head, can be filled with gentamicin-loaded bone cement. Cement may also be applied once seated within the humeral canal.
7
SHOULDER SPECIFICATIONS
REMEDY® MODULAR
HUMERAL HEAD REMEDY® MODULAR
HUMERAL STEM
72
1
5
3
4
6
REMEDY®
SHOULDER SPACER
8
Description
40
45
50
25
25
25
101
116
131
7
10.5
14
9.4
12.6
15.8
0.5
0.5
0.6
0.1
0.3
0.5
7
10.5
14
(MM)
1 2 3 4 5 6 7 8 Gentamicin
Base (g)
REMEDY Modular Humeral Head 40mm
REMEDY Modular Humeral Head 45mm
REMEDY Modular Humeral Head 50mm
REMEDY Modular Humeral Stem - Small
REMEDY Modular Humeral Stem - Medium
REMEDY Modular Humeral Stem - Large
19
19
19
9
9
9
Catalog #
RSHHSM
RSHHMD
RSHHLG
RSHSSM
RSHSMD
RSHSLG
®
®
®
®
®
®
8
REMEDY® HIP SPACER TECHNIQUE
STEP 1In accordance with the existing total joint manufacturer’s technique, prepare the infected joint space by first removing the prosthesis and any PMMA cement, if present, and any hardware (which may be a reservoir of infection).
STEP 2Using the REMEDY® Spacer Trials and templates, select the appropriate size femoral stem and femoral head components.
STEP 3
Once the appropriate head size is selected, open the package and remove the monomer vial.
Break the vial open and pour all the monomer into the screw opening of the head.
STEP 4
STEP 5Remove the cover cap, pour the remaining monomer out and place head onto the femoral stem. Begin to turn the femoral head until the appropriate “off-set” is achieved.
WARNING: The head must be seated past the Safety Line marked in blue or purple on the stem thread.
On the Trials, the blue orpurple line is designated with a missing thread on the trunnion.
STEP 6Using UNITE®AB Bone Cement, or any FDA-cleared AB PMMA, apply cement to the proximal aspect of the stem. The use of the cement is compulsory to avoid rotation and to limit the risk of dislocation.
Note: For additional fixation to the stem the remaining offset space and threads of the stem, up to the femoral head, can be filled with gentamicin-loaded bone cement. Cement may also be applied once seated within the femoral canal.
STEP 7Insert the stem (with head properly affixed) into the canal.
Continue to prepare the joint space with aggressive debridement and pulse lavage.
COVER CAP
Insert and seal the hole with the plastic cover cap supplied. Shake the head for 60 seconds to ensure all of the threads within the head are wet with monomer.
(Approximate working time for head position is 10 to 15 minutes.)
Important Note: Once the head location is selected, be sure not to continue to adjust the head location as this could affect the fixation between the head and the stem.
TRIALS
TEMPLATE
1 2 3 4 5 6 7 8
REMEDY Modular Head 46mm
REMEDY Modular Head 54mm
REMEDY Modular Head 60mm
REMEDY Modular Stem - Small
REMEDY Modular Stem - Medium
REMEDY Modular Stem - Large
REMEDY Modular Long Stem - Small
REMEDY Modular Long Stem - Medium
REMEDY Modular Long Stem - Large
46
54
60
42.3
50.9
57.3
111
112
117
227
227
231
10
11
11.5
10
11
11.5
16.5
21.7
24
16.5
21.7
24
11.3
15.5
16.5
11.3
15.5
16.5
35.6
35.6
35.6
35.6
35.6
35.6
17
17
17
17
17
17
0.9
1.6
2.3
0.5
0.6
0.7
0.6
0.8
0.9
Catalog #
RHHDSM
RHHDMD
RHHDLG
RHSTSM
RHSTMD
RHSTLG
RHLSSM
RHLSMD
RHLSLG
Gentamicin Base (g)
Description
(MM)
®
®
®
®
®
®
®
®
®
REMEDY® HIP SPACER
9
HIP SPECIFICATIONS
2 1
REMEDY® MODULAR
HEAD
7
3
5
4
6
REMEDY® MODULAR STEM
3
4
7
5
6
REMEDY® MODULAR LONG STEM
8
8
REMEDY® KNEE SPACER TECHNIQUE
STEP 1In accordance with the existing total joint manufacturer’s technique, prepare the infected joint space by first removing the prosthesis and any PMMA cement, if present, and any hardware (which may be a reservoir of infection).
Continue to prepare the joint space with aggressive debridement and pulse lavage.
STEP 2Using the REMEDY® Spacer Trials and templates, select the appropriate size femoral and tibial components. It is important that the joint is neither loose nor tight, therefore the surgeon will have to consider the additional room occupied by the cement needed for the fixation.
Apply PMMA bone cement (see Step 3) to the femoral component and femoral surface.
STEP 4STEP 3Using UNITE®AB Bone Cement, or any FDA-cleared AB PMMA, apply cement over the entire surface of the component and tibial plateau and insert into the tibia.
OPTIONAL
STEP 5Reduce the joint, removing all the excess cement, avoiding the cement that may go on the articular surface. To assure correct alignment of the components, make flex/extension movements before the cement curing occurs. Then close and check flex/extension movements and lateral stability.
Depending on the stability of the knee, it may be necessary to apply a brace to avoid the risk of dislocation.
Note: When placing the components with cement, DO NOT impact the device with a mallet. It is recommended to use hand pressure only while placing the components.
If the tibial bone defect is excessive and additional height is required, apply PMMA to the tibial wedge/insert and cement this to the inferior aspect of the tibial component.
10
TEMPLATE
TRIALS
11
KNEE SPECIFICATIONS
Description
REMEDY Tibial Component 60mm
REMEDY Tibial Component 70mm
REMEDY Tibial Component 80mm
REMEDY Femoral Component 54mm
REMEDY Femoral Component 64mm
REMEDY Femoral Component 74mm
REMEDY Femoral Component 84mm
REMEDY Tibial Wedge/Insert 60mm
REMEDY Tibial Wedge/Insert 70mm
REMEDY Tibial Wedge/Insert 80mm
54
64
74
84
41.6
49.3
56.3
63.4
9.5
10.5
11.5
12.5
60
70
80
60
70
80
36
42
48
36
42
48
25
25
25
7.8
8.2
8.8
0.4
0.6
0.9
0.5
0.8
1.2
1.6
0.3
0.5
0.7
14.5
14.5
14.5
14
14
14
10
10
10
(MM)
1 2 3 4 5 6 7 8 9 Catalog #
RKTBSM
RKTBMD
RKTBLG
RKFMSM
RKFMMD
RKFMLG
RKFMXL
RKINSM
RKINMD
RKINLG
Gentamicin Base (g)
®
®
®
®
®
®
®
®
®
®
REMEDY® KNEE SPACER
9
5
4
7
REMEDY® TIBIAL
WEDGE/ INSERT
3
REMEDY® FEMORAL COMPONENT
1
2
4
7
8
REMEDY® TIBIAL
COMPONENT
6
5
1-800-OSTEO-XL 901-453-3141 [email protected] OsteoRemedies.com
OsteoRemedies, LLC 6800 Poplar Avenue Suite 120 Memphis, TN 38138
Specifically designed formulation to work effectively with REMEDY ® Spacers
UNITE® AB BONE CEMENT
UNITE® AB Bone Cement
is a high-viscosity,
radiopaque bone cement
containing and releasing
gentamicin sulphate for
manual application.
UNITE® AB Bone Cement
is a single-use, sterile
medical device provided
in doses of 40g. UNITE® AB
Bone Cement contains
1 gram of gentamicin
per 40 gram dose versus
0.5 grams in Palacos R+G.
Gentamicin in Powder
Gentamicin in Resin
1g Gentamicin 0.5g Gentamicin
2.5%
1.8%
1.25%
0.84%
UNITE Cement
® Palacos RGentamicin
®
60”
30”
Product Mixing Waiting Working Setting Total
UNITE Cement
®
Palacos R+G
90”
30”
4’
4’
3’
3’30”
9’30”
8’30”
With a lower ratio of monomer to powder as compared to market leading bone cement mixtures, UNITE® provides benefits such as:
– Lower maximum temperature from the chemical reaction may reduce the risk to surrounding tissues.
– Reduced toxicity for those handling the cement.
– Reduced cement shrinkage may improve implant fixation.
Palacos is a registered trademark of Heraeus Medical GmbH
Approximate set time as tested at 74° F.
OsteoRemedies, REMEDY, UNITE and the corporate mark are registered trademarks of OsteoRemedies, LLC • REMEDY and UNITE are manufactured for OsteoRemedies, LLC • ©2018 • 1-18-V10
(G)
UNITE AB Bone Cement 40
Catalog #
UNITE40
Description
®