Upload
voravit-satitviriyakul
View
235
Download
0
Embed Size (px)
Citation preview
8/3/2019 SHLR Product Description
1/48
C&C08 SHLR9200
Product Description Contents
Issue 05 (2007-04-15) Huawei Technologies Proprietary i
Contents
1 Overview ...................................................................................................................................... 1-1
1.1 Networking Modes ........................................................ ................................................................. ............... 1-2
1.2 Interfaces ............................................................ ................................................................. .......................... 1-2
1.3 Functions ............................................................................................. .......................................................... 1-3
2 Product Features ......................................................................................................................... 2-1
2.1 Modular Design ............................................................. ................................................................. ............... 2-2
2.2 High Reliability ............................................................. ................................................................. ............... 2-2
2.3 High Security ................................ ................................................................ ................................................ 2-2
2.4 Open Interfaces ............................................................. ................................................................. ............... 2-3
2.5 High Performance .............................................. ................................................................. .......................... 2-3
2.6 Customized O&M System ................................. ............................................................... ............................ 2-4
2.7 Simple Installation .......................... .............................................................. ................................................ 2-5
2.8 Convenient Expansion................................................... ................................................................. ............... 2-5
3 System Architecture ................................................................................................................... 3-1
3.1 System Structure ................................................ ................................................................. .......................... 3-2
3.2 Service Processing Unit .......................... ................................................................. ..................................... 3-2
3.3 BAM.............................................................................................................................................................. 3-3
4 Services and Functions .............................................................................................................. 4-1
4.1 Mixed Number Allocation in PSTN .............................................................. ................................................ 4-2
4.2 IN Services ......................................................... ................................................................. .......................... 4-2
4.3 Disaster Tolerance ......................................................... ................................................................. ............... 4-2
5 Reliability .................................................................................................................................... 5-1
5.1 Hardware Reliability ................................................................ ................................................................ ..... 5-2
5.1.1 Exception Protection ................................................................. ........................................................... 5-2
5.1.2 Redundancy Design ........................................................ .............................................................. ....... 5-2
5.1.3 Flow Control Mechanism ........................................................... .......................................................... 5-2
5.1.4 Reliable Power Supply ............................................................... .......................................................... 5-3
5.2 Software Reliability ........................ .............................................................. ................................................ 5-3
5.2.1 Auto Fault Detection and Self-healing Ability ........................................................... .......................... 5-3
5.2.2 Data Security ........................................................ ................................................................. ............... 5-3
5.2.3 Operation Security .................................... .............................................................. ............................. 5-3
8/3/2019 SHLR Product Description
2/48
Contents
C&C08 SHLR9200
Product Description
ii Huawei Technologies Proprietary Issue 05 (2007-04-15)
6 O&M Functions .......................................................................................................................... 6-1
6.1 System Operation .......................................................... ................................................................. ............... 6-2
6.1.1 Data Configuration Management .......................................................................................... ............... 6-2
6.1.2 Subscriber Data Management .................................................................................... .......................... 6-2
6.1.3 Traffic Statistics ................................................... ................................................................. ............... 6-2
6.1.4 Automatic Database Backup ..................... ................................................................. .......................... 6-3
6.2 System Maintenance ................................ ................................................................ ..................................... 6-3
6.2.1 Alarm Function ............................................................... ................................................................. .... 6-3
6.2.2 NE Maintenance Function ........................ ................................................................. .......................... 6-3
6.2.3 Test Function ........................................................ ................................................................. ............... 6-4
6.2.4 Tracing Function ....................................................................... ........................................................... 6-4
6.2.5 Log Function ........................................................ ................................................................. ............... 6-4
7 Technical Specifications ........................................................................................................... 7-1
7.1 Technical Specifications of the System ......................................................... ................................................ 7-2
7.1.1 Capacity Specifications .............................................................. .......................................................... 7-2
7.1.2 Performance Specifications ....................................................... ........................................................... 7-2
7.1.3 Reliability Specifications .............................................................................................................. ....... 7-3
7.1.4 Physical and Electrical Specifications.................................................. ................................................ 7-3
7.1.5 Power Consumption ........................................................ .............................................................. ....... 7-4
7.1.6 EMC Specifications ............................................. .............................................................. .................. 7-4
7.1.7 Radioactive Substances .............................................................. .......................................................... 7-8
7.2 Environmental Specifications............................. ................................................................. .......................... 7-8
7.2.1 Running Environment ................................................................ .......................................................... 7-8
7.2.2 Storage Environment ................................................................. ......................................................... 7-10
7.2.3 Transport Environment ........................................ .............................................................. ................ 7-13
7.2.4 Heat Radiation .......................................... ................................................................. ........................ 7-15
8/3/2019 SHLR Product Description
3/48
C&C08 SHLR9200
Product Description Figures
Issue 05 (2007-04-15) Huawei Technologies Proprietary iii
Figures
Figure 1-1 Networking of the SHLR in the PSTN ................................................................ ............................. 1-2
Figure 3-1 System structure of the SHLR ................................................................................ .......................... 3-2
Figure 7-1 Schematic drawing of the heat dissipation of the chassis ............................................................. .. 7-15
8/3/2019 SHLR Product Description
4/48
8/3/2019 SHLR Product Description
5/48
C&C08 SHLR9200
Product Description Tables
Issue 05 (2007-04-15) Huawei Technologies Proprietary v
Tables
Table 1-1 Interface provided by the SHLR ......................................................... ................................................ 1-2
Table 2-1 Performance specifications of the SHLR............ .............................................................. .................. 2-3
Table 7-1 Capacity specifications of the SHLR .................................................................................................. 7-2
Table 7-2 Performance specifications of the SHLR............ .............................................................. .................. 7-2Table 7-3 Reliability specifications of the SHLR .......................................................... ..................................... 7-3
Table 7-4 Physical and electrical specifications of the SHLR .................................................. .......................... 7-3
Table 7-5 Power consumption of the SHLR ................................................................................................ ....... 7-4
Table 7-6 CE of the48V power supply port ...................................................................................... ............... 7-4
Table 7-7 RE ............................................................ ................................................................. .......................... 7-5
Table 7-8 CS ....................................................................................................... ................................................ 7-5
Table 7-9 RS ....................................................................................................... ................................................ 7-5
Table 7-10 ESD ....................................................... ................................................................. .......................... 7-6
Table 7-11 EFT ......................................................................................... .......................................................... 7-6
Table 7-12 Surge ...................................................... ................................................................. .......................... 7-6
Table 7-13 Requirements for temperature and humidity .......................................................... .......................... 7-8
Table 7-14 Other climate requirements............................... ................................................................. ............... 7-8
Table 7-15 Densities of mechanical substances ............................................................. ..................................... 7-9
Table 7-16 Densities of other mechanical substances ............................................................... .......................... 7-9
Table 7-17 Requirement on mechanical stress ............................................................... ................................... 7-10
Table 7-18 Climate requirements .............................................................. ........................................................ 7-10
Table 7-19 Density of mechanical substances .......................................................................... ........................ 7-11
Table 7-20 Density of other chemical substances .......................................................... ................................... 7-12
Table 7-21 Requirement on mechanical stress ............................................................... ................................... 7-12
Table 7-22 Climate requirements .............................................................. ........................................................ 7-13
Table 7-23 Density of mechanical substances .......................................................................... ........................ 7-14
Table 7-24 Density of other chemical substances .......................................................... ................................... 7-14
8/3/2019 SHLR Product Description
6/48
Tables
C&C08 SHLR9200
Product Description
vi Huawei Technologies Proprietary Issue 05 (2007-04-15)
Table 7-25 Requirements on mechanical stress ........................................................................ ........................ 7-14
8/3/2019 SHLR Product Description
7/48
C&C08 SHLR9200
Product Description 1 Overview
Issue 05 (2007-04-15) Huawei Technologies Proprietary 1-1
1 OverviewAbout This Chapter
The following table lists the contents of this chapter.
Section Describes
1.1 Networking Modes The networking modes of the SHLR9200 in the PSTN.
1.2 Interfaces The interfaces provided by the SHLR9200.
1.3 Functions The functions of the SHLR9200 in the PSTN.
8/3/2019 SHLR Product Description
8/48
1 Overview
C&C08 SHLR9200
Product Description
1-2 Huawei Technologies Proprietary Issue 05 (2007-04-15)
1.1 Networking Modes
The SHLR is used in the public switched telephone network (PSTN).
In the PSTN, the SHLR communicates with the switches through the extended ISUP protocol.
Figure 1-1 shows the networking of the SHLR in the PSTN.
Figure 1-1Networking of the SHLR in the PSTNSCP
SSP
MS/SSP
LSLS
SHLR9200
GWTS
MS
SCP: Service Control Point SSP: Service Switch Point
TS: Toll Switch GW: Gateway
MS: Tandem Switch LS: Local Switch
SHLR: Smart Home Location Register
1.2 Interfaces
Table 1-1 lists the interface provided by the SHLR to other network elements (NEs).
Table 1-1Interface provided by the SHLRInterface From the SHLR to Physical Interface Type
ISUP interface PSTN switches E1
8/3/2019 SHLR Product Description
9/48
C&C08 SHLR9200
Product Description 1 Overview
Issue 05 (2007-04-15) Huawei Technologies Proprietary 1-3
1.3 Functions
The SHLR provides the following functions:
Managing the subscriber data Storing the mapping between the directory numbers (DNs) and location routing numbers
(LRNs) of subscribers
Providing the query of the access codes of intelligent network (IN) services Supporting the ISUP signaling and extended MAP signaling interface
8/3/2019 SHLR Product Description
10/48
8/3/2019 SHLR Product Description
11/48
C&C08 SHLR9200
Product Description 2 Product Features
Issue 05 (2007-04-15) Huawei Technologies Proprietary 2-1
2 Product FeaturesAbout This Chapter
The following table lists the contents of this chapter.
Section Describes
2.1 Modular Design The modular design of the SHLR.
2.2 High Reliability The high reliability of the SHLR.
2.3 High Security The high security of the SHLR.
2.4 Open Interfaces The open interfaces provided by the SHLR.
2.5 High Performance The high performance of the SHLR.
2.6 Customized O&M System The operation and maintenance system of the SHLR.
2.7 Simple Installation The simple installation feature of the SHLR.
2.8 Convenient Expansion The easy expansion feature of the SHLR.
8/3/2019 SHLR Product Description
12/48
2 Product Features
C&C08 SHLR9200
Product Description
2-2 Huawei Technologies Proprietary Issue 05 (2007-04-15)
2.1 Modular Design
The SHLR adopts the distributed processing structure, which is based on the modular design.The modular design allows the users to customize the hardware structure based on
requirements. Thus, the user's investment is protected.
The independent modules of the SHLR complete the following functions:
Signaling access Service processing Maintenance management Service managementThis endows the SHLR with powerful capability and low cost.
2.2 High ReliabilityHigh reliability is important to network operators and end users. The SHLR uses thefollowing techniques to ensure high reliability:
Redundancy of system software and hardware Data backup Flow control mechanism System self-healing
2.3 High SecurityHigh security is also of great importance to network operators and end users. The SHLR usesthe following techniques to protect the interest of users:
Techniques used to guard against viruses, hackers, and other possible attacks on systemsoftware
Strict verification on operator identity Multiple authentication algorithms
8/3/2019 SHLR Product Description
13/48
C&C08 SHLR9200
Product Description 2 Product Features
Issue 05 (2007-04-15) Huawei Technologies Proprietary 2-3
2.4 Open Interfaces
The SHLR provides the following open interfaces:
TDM interfacesThe time division multiplexing (TDM) interfaces comprises 64 kbit/s and 2 Mbit/s
signaling interfaces.
Clock interface Internet Protocol (IP) signaling interface IP network management interface Business hall interfaceThrough the open interfaces, the SHLR can be connected with other equipment easily. Inaddition, the SHLR helps the network operators to make full use of network resources and
reduce the operation cost.
2.5 High Performance
The modular design allows the network operators to easily expand the SHLR capacity by
adding service subracks in building block mode or cascading mode.
Table 2-1 lists the performance specifications of the SHLR.
Table 2-1Performance specifications of the SHLRItem Specifications
Capacity A maximum of 9 million PSTN subscribers
Supported signaling links 64 kbit/s link: 1184 = 37 x 32
2 Mbit/s link: 74 = 37 x 2
IP signaling link: 192
E1 trunks 592 = 37 x 16
BHCA 133,200,000
Query time delay TDM 12ms
IP 20ms
Note: BHCA stands for busy hour call attempts.
8/3/2019 SHLR Product Description
14/48
2 Product Features
C&C08 SHLR9200
Product Description
2-4 Huawei Technologies Proprietary Issue 05 (2007-04-15)
2.6 Customized O&M System
The SHLR provides powerful operation and maintenance (O&M) functions. The O&Msystem provides the following functions:
Diversified Management Options User-friendly Graphic Interface Tracing Function Customized Performance Measurement Real-Time Fault Management
Diversified Management Options
The network operators can build a desired network management system based on: Network structure Management requirements Investment scaleBased on a Client/Server distributed processing system, the SHLR provides easy maintenance
that can be carried out through:
Graphic user interface (GUI) client Centralized network maintenance interface Human-machine language (MML)The SHLR supports local and remote O&M carried out by multiple users at the same time.
User-friendly Graphic Interface
The SHLR provides a friendly O&M interface. The O&M interface has the followingfeatures:
Simplicity High efficiency Visual effectThe O&M system provides a graphic topology view of network structure and a device panel
to ease operations. Shortcut menus are provided for the commands that are commonly used.
Tracing Function
The SHLR provides the following tracing functions:
Signaling tracing Interface tracing Subscriber tracing Message explanation
8/3/2019 SHLR Product Description
15/48
C&C08 SHLR9200
Product Description 2 Product Features
Issue 05 (2007-04-15) Huawei Technologies Proprietary 2-5
Customized Performance Measurement
The SHLR displays the performance measurement data through lists and graphics. It also
supports real-time performance monitoring and collects the background performance data.
Real-Time Fault Management
The SHLR can perform the following management tasks:
Receiving and displaying network equipment fault reports Providing audible or visual alarms through topology view, alarm panel, alarm box, and
mobile phones on a real-time basis
Providing a fault management system with leveled-filtering functions and detailed faultreports
Providing online help and fault removal suggestionsAll the above features make it possible to carry out quick fault location and removal.
2.7 Simple InstallationThe cabinet and internal cables of the SHLR are installed and tested before delivery. The field
engineers only need to fix the cabinet, install boards and microcomputers, and connect
external cables by referring to the installation guide provided. The whole installation processis very simple.
All the cables of the SHLR are collected at the rear of the cabinet. All the slots areboard-readywhen you plug in a board, the board automatically boots up and becomes
ready for service. The users can easily add boards in expansion or replace boards duringmaintenance.
The external cables of the SHLR comprises power cables, transmission cables, and signalcables. All the connectors of external cables are located on the top of the cabinet. The
connectors have clear silkscreen, which facilitates the cabling.
All the software is installed before delivery, and all parameters are configured according to
the users' requirements. After hardware installation, the system can run normally uponpowered on.
The simple hardware installation saves time, and the fast network rollout speeds up serviceprovisioning.
2.8 Convenient Expansion
If the SHLR needs to be expanded, the users only need to add trunk interface boards orexpand the memory and CPUs of the microcomputer.
The SHLR also provides a software upgrade tool. That tool can automatically collect the
upgrade information and prompt the points to be noted during upgrade.
The SHLR supports online upgrade. Therefore, the services are not interrupted during
upgrade.
8/3/2019 SHLR Product Description
16/48
8/3/2019 SHLR Product Description
17/48
C&C08 SHLR9200
Product Description 3 System Architecture
Issue 05 (2007-04-15) Huawei Technologies Proprietary 3-1
3 System ArchitectureAbout This Chapter
The following table lists the contents of this chapter.
Section Describes
3.1 System Structure The structure of the SHLR.
3.2 Service Processing Unit The functions of the service processing unit.
3.3 BAM The functions of the BAM.
8/3/2019 SHLR Product Description
18/48
3 System Architecture
C&C08 SHLR9200
Product Description
3-2 Huawei Technologies Proprietary Issue 05 (2007-04-15)
3.1 System Structure
The SHLR consists of the following functional modules:
Service processing unit Backend administration module (BAM)For the hardware structure, refer to the C&C08 SHLR Technical ManualSystem Principle.
The structure of the SHLR is as shown in Figure 3-1.
Figure 3-1System structure of the SHLR
LAN
BAM to NMS
sevice
processingunit
BAM: Backend Administration Module NMS: Network Management System
3.2 Service Processing Unit
The service processing unit has the following functions:
Signaling accessThe signaling access involves the access of the SS7 and IP signaling.
Number managementThe number management comprises:
Managing subscriber data Querying the DN based on the LRN or querying the LRN based on the DN Inserting the IN access codes
Database managementThe service processing unit interacts with PSTN switches through ISUP.
8/3/2019 SHLR Product Description
19/48
C&C08 SHLR9200
Product Description 3 System Architecture
Issue 05 (2007-04-15) Huawei Technologies Proprietary 3-3
3.3 BAM
The BAM provides the following management functions:
Alarm processing Performance management Equipment status management Maintenance managementThe BAM also provides interfaces to the NMS to realize the centralized management andmaintenance.
8/3/2019 SHLR Product Description
20/48
8/3/2019 SHLR Product Description
21/48
C&C08 SHLR9200
Product Description 4 Services and Functions
Issue 05 (2007-04-15) Huawei Technologies Proprietary 4-1
4 Services and FunctionsAbout This Chapter
The following table lists the contents of this chapter.
Section Describes
4.1 Mixed Number Allocation
in PSTN
The mixed number allocation service provided by the
SHLR.
4.2 IN Services The IN services.
4.3 Disaster Tolerance The disaster tolerance provided by the SHLR.
8/3/2019 SHLR Product Description
22/48
4 Services and Functions
C&C08 SHLR9200
Product Description
4-2 Huawei Technologies Proprietary Issue 05 (2007-04-15)
4.1 Mixed Number Allocation in PSTN
In the PSTN, the SHLR is connected to all the local call-originating switches. Thecall-originating switches in the local PSTN comprise:
TS Gateway MS LS SSPThe users can configure data on these local switches to decide whether all calls originated
from local exchanges are sent to the SHLR for authentication before they are connected. If theLS does not support the SHLR, the MS must support it.
The mixed number allocation service allows unified management of subscriber numbers in
the coverage area of the SHLR.
The subscriber provided with the mixed number allocation service has two numbers: DN and
LRN. If the subscriber moves to another residence, only the LRN is changed, and the DN maynot be changed. The number portability (NP) is thus realized for terminal subscribers.
4.2 IN ServicesThe SHLR stores the IN service subscription info of subscribers. All the local call requests
(from PSTN subscribers and NGN subscribers) are sent to the SHLR. The SHLR queries thesubscription info of the subscriber and then returns the IN service access code. Based on theIN service access code, the LS connects the call to the SSP. The SSP then triggers the IN
service.
4.3 Disaster Tolerance
As the central database, the SHLR processes and backs up the subscriber data. When theactive SHLR is not available, the signaling system Number 7 (SS7) and other functionalentities can exchange signaling. The redundancy SHLR can also work as the active SHLR
temporarily.
The SHLR provides two disaster tolerance solutions:
1+1 Load-Sharing Redundancy Solution N+1 Mated Redundancy Solution
8/3/2019 SHLR Product Description
23/48
C&C08 SHLR9200
Product Description 4 Services and Functions
Issue 05 (2007-04-15) Huawei Technologies Proprietary 4-3
1+1 Load-Sharing Redundancy Solution
In this solution, two SHLRs work in mutual backup mode. That is, either of the two SHLRs
shares 50% of the work load.
Each SHLR stores the static data of all subscribers.
If one SHLR fails, the other SHLR takes over all the service processing.
N+1 Mated Redundancy Solution
In this solution, several SHLRs work as the active SHLRs, and one SHLR works as the
redundancy SHLR. The active and redundancy SHLRs store the static data of all subscribers.
The redundancy SHLR backs up the data of the active SHLRs to ensure data consistency.
If an active SHLR fails, the redundancy SHLR takes over the service processing of the faulty
SHLR. The services can be manually or automatically switched over.
The SHLR supports N+1 SHLR static data backup based on the BOSS system. The baseline
data is backed up in cutover manner, and the incremental data is backed up in the BOSSoperating system. The existing SHLRs in the network need not be upgraded.
8/3/2019 SHLR Product Description
24/48
8/3/2019 SHLR Product Description
25/48
C&C08 SHLR9200
Product Description 5 Reliability
Issue 05 (2007-04-15) Huawei Technologies Proprietary 5-1
5 ReliabilityAbout This Chapter
The following table lists the contents of this chapter.
Section Describes
5.1 Hardware Reliability The reliability design for the system hardware.
5.2 Software Reliability The reliability design for the system software.
The SHLR takes specialized and all-around protective measures to ensure its reliability.This section describes the following reliability features of the SHLR:
Hardware Reliability Software Reliability
8/3/2019 SHLR Product Description
26/48
5 Reliability
C&C08 SHLR9200
Product Description
5-2 Huawei Technologies Proprietary Issue 05 (2007-04-15)
5.1 Hardware Reliability
The SHLR uses the following techniques to ensure its hardware reliability:
Exception Protection Redundancy Design Flow Control Mechanism Reliable Power Supply
5.1.1 Exception Protection
The SHLR is protected against the following failures and exceptions:
Power failure Maloperation on power switches Lightning strikes on power supply system High voltage and low voltage Short circuit Over-current and over-voltage on power supplies and interfaces Extreme temperature of power supply units (by internal temperature control mechanism)
5.1.2 Redundancy Design
The SHLR uses the following redundancy design:
Multi-processor and multi-step operation design on system level Hot backup of the key boards Dual-network and dual-plane design for the SHLR database unit
The dual-network and dual-plan design realizes real-time data backup and eliminatessingle-point failures.
5.1.3 Flow Control Mechanism
The SHLR provides various flow control mechanisms to handle peak traffic. The flow controlmechanisms comprise:
Multi-level flow controlThe multi-level flow control ensures smooth adjustment of the system traffic.
Real-time monitoring and detecting of processor parametersThe CPU load and resource utilization of the processor are monitored on a real-timebasis. Based on the information collected, adaptive flow control is performed.
Setting of flow control parametersThe flow control parameters can be set to implement forced flow control.
8/3/2019 SHLR Product Description
27/48
C&C08 SHLR9200
Product Description 5 Reliability
Issue 05 (2007-04-15) Huawei Technologies Proprietary 5-3
5.1.4 Reliable Power Supply
To prevent system breakup caused by power failure, the following measures are used on the
power supply system of the SHLR:
Voltage detection of input power and warning of high voltage or low voltage Protection against sharp voltage fluctuation and lightning strikes Protection of system programs and data in case of power failure Protection against over-voltage, over-current, and reverse-polarity connection for each
board
Power module redundancy of boards
5.2 Software ReliabilityThe SHLR uses the following techniques to ensure its software reliability:
Auto Fault Detection and Self-healing Ability Data Security Operation Security
5.2.1 Auto Fault Detection and Self-healing Ability
The software of the SHLR adopts auto fault detection and self-healing. The auto faultdetection and self-healing comprise:
Auto detection of the system hardware and software faults Auto running of the troubleshooting program to isolate and remove faults when a
hardware or software fault is detected
Initialization of a switchover from the active system to the standby system in the case ofa fault resolution failure
5.2.2 Data Security
To protect important data, the SHLR provides:
Automatic backup of essential data Backup of data to other segments of the same disk, to an external disk, or to a remote
data center
5.2.3 Operation Security
To ensure operation security, the SHLR offers:
Flow control mechanism for operation tasks to control traffic volume Customized transfer time of operation tasks to guarantee security and correctness of data Strict management of user authorities to prevent illegal operations Detailed user operation logs to enable the traceability of the operations performed
8/3/2019 SHLR Product Description
28/48
8/3/2019 SHLR Product Description
29/48
C&C08 SHLR9200
Product Description 6 O&M Functions
Issue 05 (2007-04-15) Huawei Technologies Proprietary 6-1
6 O&M FunctionsAbout This Chapter
The following table lists the contents of this chapter.
Section Describes
6.1 System Operation The operations that can be performed on the SHLR.
6.2 System Maintenance The maintenance functions provided by the SHLR.
8/3/2019 SHLR Product Description
30/48
6 O&M Functions
C&C08 SHLR9200
Product Description
6-2 Huawei Technologies Proprietary Issue 05 (2007-04-15)
6.1 System Operation
Through the O&M system, the users can perform the following operations:
Data Configuration Management Subscriber Data Management Traffic Statistics Automatic Database Backup
6.1.1 Data Configuration Management
The SHLR provides the following functions to ease the data configuration:
Easy-to-use MML interface with predictive text input function Strict user authority
The strict user authority defines the operation scope of different users.
Reasonable task assignment for the purpose of flexible operations Local maintenance or remote centralized maintenance Online data modification and loading without affecting services
6.1.2 Subscriber Data Management
Through the O&M system, the users can manage:
Subscription data in the SHLR Authentication data in the AuCTo simplify the subscriber data management, the SHLR provides the following functions:
Easy-to-use MML interface with predictive text input function Convenient service addition, modification, and deletion Operation log that provides detailed operation history Interfaces to the business halls
6.1.3 Traffic Statistics
The SHLR provides the following performance measurement functions:
Customization of measurement entitiesThe users can define measurement entities through arithmetic expressions based onexisting measurement entities. The operand of the arithmetic expression can be aconstant, measurement cycle, or a measurement entity of the SHLR.
Customization of measurement reportsThe users can specify the desired measurement entities and output a report.
Flexible setting of the measurement time Real-time scanning and measurement of calls and traffic Output of measurement results in the standard and open format Printing of measurement results
8/3/2019 SHLR Product Description
31/48
C&C08 SHLR9200
Product Description 6 O&M Functions
Issue 05 (2007-04-15) Huawei Technologies Proprietary 6-3
Measurement result output interface for further development (such as opening of rawdata)
6.1.4 Automatic Database Backup
The SHLR provides auto backup to minimize the manual work.
The SHLR automatically backs up the subscriber data from the disk array to local hard disks
or tapes of the two-node cluster. The users can set the time interval between backups.
The users only need to replace the tapes as planned.
6.2 System Maintenance
The O&M system of the SHLR supports the following maintenance modes:
Single-point terminal Centralized network management Local maintenance Remote maintenanceThe SHLR provides the following maintenance-related functions:
Alarm Function NE Maintenance Function Test Function Tracing Function Log Function
6.2.1 Alarm Function
Through the alarm management system, the users can:
Collect alarm information Classify and send the collected alarm information to the BAM according to the priority
levels
Display detailed description and removal suggestions of alarms through the BAM alarmconsole
The maintenance staff can locate and remove faults based on the alarm information.
6.2.2 NE Maintenance Function
The SHLR provides the following NE maintenance functions:
Status monitoring of the link, timeslot, or board of a functional unit Tracing of messages over the standard interfaces of the system Remote maintenance of the equipment
8/3/2019 SHLR Product Description
32/48
6 O&M Functions
C&C08 SHLR9200
Product Description
6-4 Huawei Technologies Proprietary Issue 05 (2007-04-15)
6.2.3 Test Function
The SHLR provides the following test functions:
Connection to the test instrument through a test interface, without affecting the normaloperation of the equipment
System-level routine tests on boards and interface circuits Automatic diagnosis and removal of hardware and software failures Convenient output, edit, and handling of the test and diagnostic results
6.2.4 Tracing Function
The SHLR provides powerful tracing function.
The users can perform subscriber tracing and signaling tracing without using any other testdevice.
The tracing function helps locate faults.
6.2.5 Log Function
The SHLR provides the following log functions:
Provision of user operation logs and system running logs Provision of a friendly and easy-to-use log output interface with detailed online help Viewing of log information Explanation and analysis of the non-viewable information Filtering of test and debugging information in the logs to help locate faults
8/3/2019 SHLR Product Description
33/48
C&C08 SHLR9200
Product Description 7 Technical Specifications
Issue 05 (2007-04-15) Huawei Technologies Proprietary 7-1
7Technical SpecificationsAbout This Chapter
The following table lists the contents of this chapter.
Section Describes
7.1 Technical Specifications of
the SystemThe technical specifications of the SHLR.
7.2 Environmental
Specifications
The requirements for the running and transport
environment of the SHLR.
8/3/2019 SHLR Product Description
34/48
7 Technical Specifications
C&C08 SHLR9200
Product Description
7-2 Huawei Technologies Proprietary Issue 05 (2007-04-15)
7.1 Technical Specifications of the System
7.1.1 Capacity SpecificationsTable 7-1 lists the capacity specifications of the SHLR.
Table 7-1Capacity specifications of the SHLRItem Specifications
Maximum number of PSTN subscribers 900,000,000
Bearer networking modes supported 64 kbit/s, 2 Mbit/s, N x 64 kbit/s, IP
64 kbit/s signaling links supported 1184 = 37 x 32
2 Mbit/s signaling links supported 74 = 37 x 2
IP signaling links 192
E1 trunks 592 = 37 x 16
7.1.2 Performance Specifications
Table 7-2 lists the performance specifications of the SHLR.
Table 7-2Performance specifications of the SHLRItem Specifications
Time for defining or deleting a subscriber < 500 ms
Maximum load of a 64 kbit/s signaling link 0.99 Erl
Maximum load of a 2 Mbit/s signaling 0.95 Erl
Fixed query delay TDM 12 ms
IP 20 ms
Queries per second 60,000
Message loss probability 10-7
Message sequence in error probability 10-10
8/3/2019 SHLR Product Description
35/48
C&C08 SHLR9200
Product Description 7 Technical Specifications
Issue 05 (2007-04-15) Huawei Technologies Proprietary 7-3
7.1.3 Reliability Specifications
Table 7-3 lists the reliability specifications of the SHLR.
Table 7-3Reliability specifications of the SHLRItem Specifications
Availability 99.99989%
Start time from system power-on to
service ready< 30 minutes
Time from system warm start to serviceready
< 10 minutes
Suspending time 0.195 minutes/year
MTBF 87.67 years
Note: MTBF refers to mean time between failures.
7.1.4 Physical and Electrical Specifications
Table 7-4 lists the physical and electrical specifications of the SHLR.
Table 7-4Physical and electrical specifications of the SHLRItem Specifications
Cabinet standard N68-22 cabinet (conforming to the IEC297
standard)
Dimensions (W x D x H): 600 mm x 800 mm x 2200 mm
Dimensions of the service frame (W x D x H): 482.6 mm x 420 mm x 619.5 mm
Weight of the base cabinet (in full
configuration)354 kg
Weight of the extended cabinet (in
full configuration)338 kg
Available space height of cabinet 46 U (1 U = 44.45 mm)
8/3/2019 SHLR Product Description
36/48
7 Technical Specifications
C&C08 SHLR9200
Product Description
7-4 Huawei Technologies Proprietary Issue 05 (2007-04-15)
7.1.5 Power Consumption
Table 7-5 lists the power consumption of the SHLR.
Table 7-5Power consumption of the SHLRCabinet Device Power Consumption (W) Total Power
Consumption (W)
Base
cabinet
Two service
frames2 x 480 = 960 1340 (or 1590)
Power
distribution
box
20
Two LAN
switches
2 x 30 = 60
KVM
switcher50
One BAM or
two BAMs250 or
500
Extendedcabinet
Two serviceframes
2 x 480 = 960 980
Powerdistribution
box
20
NOTE
When designing the power supplies, refer to Table 7-5 for the power consumption of the devices. Be
sure to leave a margin.
7.1.6 EMC Specifications
EMI Specifications
Conducted Emission
CE
Table 7-6CE of the48V power supply portFrequency Range Limit (dBV)
Average Value Quasi-Peak Limit
0.15 MHz to 0.50 MHz 66 79
0.50 MHz to 30 MHz 60 73
8/3/2019 SHLR Product Description
37/48
C&C08 SHLR9200
Product Description 7 Technical Specifications
Issue 05 (2007-04-15) Huawei Technologies Proprietary 7-5
NOTE The CE is used to check the interference signal radiated through a cable port.
Radiated EmissionRE
Table 7-7REFrequency Range (MHz) Quasi-Peak Limit (dBV/m)
30230 50
2301000 57
NOTE
The RE is used to check the interference signal radiated through an enclosure port. The RE is measured three meters away from the device.
EMS Specifications Conducted SusceptibilityCS
The CS applies to the48V DC power cable side and the signal side, the cable of whichis longer than three meters.
Table 7-8CSTest Port Frequency Range Voltage Performance Level
DC side 150 kHz to 230 MHz 10 V A
Signal side 10 V A
NOTE
The CS is used to check the ability of enduring the outside interference coupled through a cable port.
Radiated SusceptibilityRS
Table 7-9RSFrequency Range Voltage Performance Level
80 MHz to 2 GHz 10 V/m A
NOTE
RS index is used to check the ability of enduring the outside interference coupled through an enclosure
port.
Electrostatic DischargeESDThe ESD shows the effect of static discharge of human hand and other electrostatic
sources on various parts of the product, such as the boards, frames and cabinet.
8/3/2019 SHLR Product Description
38/48
7 Technical Specifications
C&C08 SHLR9200
Product Description
7-6 Huawei Technologies Proprietary Issue 05 (2007-04-15)
NOTE The ESD is used to check the ability of enduring the two kinds of electrostatic interferences:
Atmospherical discharge Contact discharge
Table 7-10ESDDischarge Mode Voltage Performance Level
Atmospherical discharges 8 kV B
15 kV R
Contact discharge 6 kV B
8 kV R
Electronic Fast Transient Pulse GroupEFTThe EFT applies to the DC side and some signal sides, the cable of which is longer thanthree meters.
Table 7-11EFTTested Port Voltage Performance Level
AC side 1 kV B
DC side 0.5 kV B
Signal side 0.5 kV B
NOTE
The EFT is used to check the effect of the high-frequency small energy caused by the sensibility load
switching on the product.
Surge and LightningSurgeThe surge applies to the DC power cable side and the signal side, such as the indoorsignal cable port and E1, the signal cable of which is longer than 10 meters.
Table 7-12SurgeTest port Voltage Performance Level
DC side 1 kV (differential mode)
2 kV (common mode)
B
Signal
side
Indoor (cables
distributed within
the system)
1 kV B
8/3/2019 SHLR Product Description
39/48
C&C08 SHLR9200
Product Description 7 Technical Specifications
Issue 05 (2007-04-15) Huawei Technologies Proprietary 7-7
NOTE Performance level A: The system can endure the test load imposed on it without being damaged, and
can work normally in the specified conditions. The software or data of the tested switching system
(all the data in the memory or being processes) does not change. The system performance is not
affected.
Performance level B: The system can endure the test load imposed on it without being damaged. Thesoftware or memory data does not change. The communication performance is affected. The effect,
however, is within the endurable scope (the scope can be defined according to the product situation),
and the established communication links are not interrupted. The system, after the test, can
automatically restore the normal performance without manual operation.
Performance level C: Some of the functions of the equipment are lost during the test. Thosefunctions, however, can be restored automatically in a certain period of time after the test (usually,
the shortest time needed from the system restart to service ready). No physical damage or system
operation software deterioration occurs.
Performance level R: After the test, no physical damage or fault (including software damage) occurs.Damages of the protective device caused by outside interface signals are allowed. After the
protective device is replaced or the running parameters are reset, the equipment can still work
normally.
Electromagnetic Security Criteria Supported
The SHLR complies with the following electromagnetic security criteria:
IEC 60950 EN 60950 EN 60825-1 EN 60825-2 CSA C22.2 No. 60950 UL 60950
Electromagnetic Compatibility Criteria Supported
The SHLR complies with the following electromagnetic compatibility criteria:
ETSI EN 300 386 V1.3.1 (2001) ETSI EN 300 386 V1.2.1 (2000) EN 55022 (1998) RE EN 55022 (1998) CE EN 61000-4-2 (2001) ESD EN 61000-4-3 (2002) RS EN 61000-4-4 (1995) EFT/B EN 61000-4-5 (2001) Surge EN 61000-4-6 (2001) CS EN 61000-4-11 (2001) DIP/interruption CISPR22 (1997) RE CISPR22 (1997) CE IEC 61000-4-2 (1995) ESD IEC 61000-4-3 (1995) RS IEC 1000-4-4 (1995) EFT/B IEC 1000-4-5 (1995) Surge
8/3/2019 SHLR Product Description
40/48
8/3/2019 SHLR Product Description
41/48
C&C08 SHLR9200
Product Description 7 Technical Specifications
Issue 05 (2007-04-15) Huawei Technologies Proprietary 7-9
Biological Requirements
To keep the environment clean, avoid the following:
Propagation of epiphyte and mildew Entrance of rodent animals like mouse
Air Cleanness Requirements
To keep the air clean, remove the dust of the following types:
Explosive dust Conductive dust Magneto-conductive dust Corrosive dustThe density of mechanically active materials must comply with Table 7-15.
Table 7-15Densities of mechanical substancesSubstance Unit Density
Suspending dust mg/m 0.2
Precipitable dust mg/mh 1.5
Sand mg/m 30
Note:
Suspended dust: diameter 75 m
Deposited dust: 75 m diameter 150 m
Sand: 150 m diameter 1000 m
The densities of other chemical substances in the air must meet the requirements listed inTable 7-16.
Table 7-16Densities of other mechanical substancesChemical Substance Unit Density
SO2 mg/m 0.301.00
H2S mg/m 0.100.50
NH3 mg/m 1.003.00
Cl2 mg/m 0.100.30
HCl mg/m 0.100.50
HF mg/m 0.010.03
O3 mg/m 0.050.10
CO mg/m 5.0
8/3/2019 SHLR Product Description
42/48
7 Technical Specifications
C&C08 SHLR9200
Product Description
7-10 Huawei Technologies Proprietary Issue 05 (2007-04-15)
Mechanical Stress Requirements
Table 7-17Requirement on mechanical stressItem Sub-item Range
Sinusoidaloscillation
Frequency range 2 Hz9 Hz 9 Hz200 Hz
Displacement 3.5 mm
Acceleration 10.0 m/s
Unstable impact Unstable impact II 100 m/s
Static load 0
Note:Shock response spectrum: It is the response curve of the largest acceleration of the equipment activated
by the specified impact. Shock response spectrum II indicates that the duration of the response spectrum
of the semisinusoidal impact is 6 ms.
Static load: It is the pressure load coming from the top when the equipment in package is piled in a
specified way.
7.2.2 Storage Environment
Climate Requirements
Table 7-18Climate requirementsItem Range
Altitude 5000 m
Air pressure 70 kPa106 kPa
Temperature (C) -40 C+70 C
Temperature changing rate 1 C/min
Relative humidity (%) 10%100%
Sun radiation 1120 W/s
Heat radiation 600 W/s
Wind speed 30 m/s
8/3/2019 SHLR Product Description
43/48
C&C08 SHLR9200
Product Description 7 Technical Specifications
Issue 05 (2007-04-15) Huawei Technologies Proprietary 7-11
Waterproof Requirements
If the equipment is to be stored inside the equipment room, note that:
The place where the package is placed is dry. The package is protected against water.If the equipment is to be placed outside the equipment room, note that:
The package is kept well. The package is protected against rain. The place where the package is placed is dry. The package is not exposed to the sunshine.
Biological Requirements
To keep the environment clean, avoid the following:
Propagation of epiphyte and mildew Entrance of rodent animals like mouse
Air Cleanness Requirements
To keep the air clean, remove the dust of the following types:
Explosive dust Conductive dust Magneto-conductive dust Corrosive dustThe density of the mechanically active materials must comply with the requirements listed inTable 7-19.
Table 7-19Density of mechanical substancesSubstance Unit Density
Suspended dust mg/m 5.00
Deposited dust mg/mh 20.0
Sand mg/m 300
Note:
Suspended dust: diameter 75 m
Suspended dust: 75 m diameter 150 m
Sand: 150 m diameter 1000 m
8/3/2019 SHLR Product Description
44/48
7 Technical Specifications
C&C08 SHLR9200
Product Description
7-12 Huawei Technologies Proprietary Issue 05 (2007-04-15)
The densities of other chemical substances in the air must meet the requirements listed inTable 7-20.
Table 7-20Density of other chemical substancesChemical Substance Unit Density
SO2 mg/m 0.301.00
H2S mg/m 0.100.50
NO2 mg/m 0.501.00
NH3 mg/m 1.003.00
Cl2 mg/m 0.100.30
HCl mg/m 0.100.50
HF mg/m 0.010.03
O3 mg/m 0.050.10
Mechanical Stress Requirements
Table 7-21Requirement on mechanical stressItem Sub-item Range
Sinusoidaloscillation
Frequency range 2 Hz9 Hz 9 Hz200 Hz
Displacement 7.0 mm
Acceleration 20.0 m/s
Unstable impact Shock response spectrum
II 250 m/s
Static load 5 kPa
Note:
Shock response spectrum: It is the response curve of the largest acceleration of the equipment activated
by the specified impact. Shock response spectrum II indicates that the duration of the response spectrum
of the semisinusoidal impact is 6ms.
Static load: It is the pressure load coming from the top when the equipment in package is piled in a
specified way.
8/3/2019 SHLR Product Description
45/48
C&C08 SHLR9200
Product Description 7 Technical Specifications
Issue 05 (2007-04-15) Huawei Technologies Proprietary 7-13
7.2.3 Transport Environment
Climate Requirements
Table 7-22Climate requirementsItem Range
Altitude 5000 m
Air pressure 70 kPa106 kPa
Temperature (C) -40 C to +70C
Temperature changing rate 3oC/min
Relative humidity (%) 5%100%
Sun radiation 1120 W/s
Heat radiation 600 W/s
Wind speed 20 m/s
Rainfall 6 mm/min
Waterproof Requirements
During the transportation, note that:
The package is kept well. The transport vehicles can prevent rain from entering the package. There is no water inside the transport vehicles.
Biological Requirements
To keep the environment clean, avoid the following:
Propagation of epiphyte and mildew
Entrance of rodent animals like mouse
Air Cleanness Requirements
To keep the air clean, remove the dust of the following types:
Explosive dust Conductive dust Permeable dust Corrosive dust
8/3/2019 SHLR Product Description
46/48
7 Technical Specifications
C&C08 SHLR9200
Product Description
7-14 Huawei Technologies Proprietary Issue 05 (2007-04-15)
The densities of mechanical substances in the air must meet the requirements listed in Table
7-23.
Table 7-23Density of mechanical substancesSubstance Unit Density
Suspended dust mg/m No requirement
Deposited dust mg/mh 3.0
Sand mg/m 100
Note:
Suspended dust: diameter 75 m
Deposited dust: 75 m diameter 150 m
Sand: 150 m diameter 1000 m
The densities of other chemical substances in the air must meet the requirements listed inTable 7-24.
Table 7-24Density of other chemical substancesChemical Substance Unit Density
SO2 mg/m 1.00
H2S mg/m 0.50
NO2 mg/m 1.00
NH3 mg/m 3.00
Cl2 mg/m 0.30
HCl mg/m 0.05
HF mg/m 0.03
O3 mg/m 0.10
Mechanical Stress Requirements
Table 7-25Requirements on mechanical stressItem Sub-item Range
Sinusoidaloscillation
Frequency range 2 Hz9 Hz 9 Hz200 Hz 200 Hz500Hz
Displacement 7.5 mm
Acceleration 20.0 m/s 40.0 m/s
8/3/2019 SHLR Product Description
47/48
C&C08 SHLR9200
Product Description 7 Technical Specifications
Issue 05 (2007-04-15) Huawei Technologies Proprietary 7-15
Item Sub-item Range
Random
oscillation
Acceleration spectrum
density10 m/s 3 m/s 1 m/s
Frequency range 2 Hz9 Hz 9 Hz200 Hz 200 Hz500Hz
Unstable
impact
Shock response spectrum
II 300 m/s
Static load 10 kPa
Note:
Shock response spectrum: It is the response curve of the largest acceleration of the equipment activated
by the specified impact. Shock response spectrum II indicates that the duration of the response spectrum
of the semisinusoidal impact is 6ms.
Static load: It is the pressure load coming from the top when the equipment in package is piled in a
specified way.
7.2.4 Heat Radiation
The chassis has a fan frame on the top of the unit slot. The fans draw in cool air, drive the airthrough the slots, and exhaust hot air from the air vent on the upper part of the rear of the
chassis.
Figure 7-1Schematic drawing of the heat dissipation of the chassis
8/3/2019 SHLR Product Description
48/48
7 Technical Specifications
C&C08 SHLR9200
Product Description
The fan frame has six AFB0812VH-R00 fans. The power rating of each fan is 3.12 W. Themaximum power of the fan frame is 23 W.
The air delivery of a single fan is 25 CFM (Cubic Feet per Minute), and that of the whole fanframe is 150 CFM.
The average wind speed is about 0.7 m/s.