Embed Size (px)
Citation preview
Thank you for purchasing Shimano’s Dendoumaru 4000 HP. Before using, please read this manual carefully, and the same as you dofor your reel, keep it with care.
Features .................................................................................................................. 2Digital counter parts name ..................................................................................... 3Main switch ............................................................................................................. 4Name of each part .................................................................................................. 5Power source and cord........................................................................................... 6Learning method ..................................................................................................... 7Learning method 1. When winding line other than Shimano Antares 50lbs.-600m
(Learning Mode) .................................................................................................. 9Learning method 2. Winding Shimano ANTARES 50lbs.-600M
(Specify Mode) ................................................................................................. 11Sequence ..............................................................................................................12Various techniques ............................................................................................... 14Zero-setting ........................................................................................................... 16
DENDOUMARU
High-cut repair ...................................................................................................... 18Gunnel stop .......................................................................................................... 19Motorized reel, speed-switch usage .....................................................................21Rack setting .......................................................................................................... 22Rack-setting:Top Mode & Bottom Mode...............................................................23Top Mode fishing example .................................................................................... 24Bottom Mode fishing example .............................................................................. 25Handling precautions/safety functions ................................................................. 26Specifications, inquiry, after-sales-service ........................................................... 28Trouble-shooting ................................................................................................... 29Safety precautions ................................................................................................ 30Service network .................................................................................................... 31
2
Features
Rack memory
Hi-speed
Zero-setting
Gunnel stop
Line-cut setting
S L S
Top & Down
Counter display can be selected.
Switching between “Top Mode”and “Down Mode”. See P.23Depending on fishing location, method, and target catch, water-depth indicator can be switched - from top (surface) to bottom.
Speedy wind-up
Hi-speed empty wind-up 160m/min.Provides empty hook hi-speed wind-up, enabling fastreturn or change of position. See P.21
The hook aims precisely at the rack
Rack memory. See P.22Once the rack memory is taken, when the hook approachesit again, alarm will sound to announce approach to the rack.
Hook dropping to precise water-depth
Zero-setting. See P.16~17When the hook is on the water surface, it can be set as 0-meter, then dropped to precise water-depth.
When the pole is erected, the hook returns
Gunnel stop. See P.19~�20Gunnel stop position is set automatically. After gunnelstop, erect the pole and the hook returns.
One-touch line-cut repair.
Line-cut setting. See P.18When the line is cut, re-connect hook, do zero-setting on thesurface by pressing 0-set switch. The counter will recover.
Fast, precise search for rack
SLSII installed (Shimano Line-ProgramSystem 2). See P.8~11Roller has been removed from reel unit, hook dropping isfast, and no slip caused by roller.
One-touch
Computer-controlled: 10-160m/min.
One-touch Switch 15-speedwinding-up. See P.3, P.21
Washable. Drag comes with carbon-washer, water-resistant
Wash and keep. See P.26
After wash, spray some oil. Long-life drag with carbon-washer.
Instant Max. Torque 44 kgcm.
Surpassing the previous 6000 Class
Instant Max. Torque 44 kgcm.
SHIMANO ANTARES 50lbs.-600Mwith reserve power.Enhanced spool-size for max. satisfaction
Continuous winding & frequent winding...
Double-click operation changeover See P.4
When the motor is off, switch to the double-click mode forwinding-up by simultaneously pressing the HIGH and LOWbuttons for 3 sec. or more.
Superior visibility & operability…
Large LCD & control buttons See P.3
Double-click
3
Digital Counter Component Names Various displayIt lights up at each mode: 学習 (Learning), 指定 (Specify), and 下巻 (Wind-down). Note: Wind-down mode does not apply to this model specifications.Zero-setting: It lights up when you do 0-setting. Top/Bottom switch
One touch
Memo, Zero-setting switch
One touch
More than 3 sec.
It shows the present wind-up speedsetting.
Mode switch
One-touchon the
front tinybottom
Displays memorized water-depth.
Various display底 (Bottom) : It lights up during “Bottom Mode”.When there is no light, it means “Top Mode”. : It will light up when the battery is weak. (below 10.5V)
Auto-line delivery functionWhen the hook dropped reaches 10M, the motor will start turning automatically causing the spool to turn easily at line direction. When you OFF the function, “糸送止 (Line delivery stop)” indicator will light up.
Main switchMotorized wind-up ON/OFF switch. It works only when pressed and held after stopping at gunnel.
Speed selection switchFor wind-up speed, selection of15 speed levels.
In Top Mode, the presentwater-depth goes to the memory.The same for Bottom Mode, the present depth is 0.0M, and it is counted from the bottom up.
In standard mode, pressed once, and it switches from Top Mode to Bottom Mode.
Zero-settingAdjust the hook to the water surface and do zero-setting.
It will switch in sequence from “学習 (Learning)” to “指定 (Specify)” to “下巻 (Wind-down)” at every push. Note: Wind-down mode does not apply to this model specifications.
• Note: The drawing shows all LCD light-up for explanation purpose only.
Wind-up power (line tension) is displayed in numbers. (the number is not kg)
Present water-depth“Top Mode”: Depth measured from top.“Bottom Mode”: Depth measured from bottom.Note: Do not let out 999m or more of line. Doing so will result in inaccurate count values. Note: Depth is measured in 10cm units. (When over 100m, the unit becomes 1 m as in the depicted below.)
More than 3 sec.
When the motor stops, once the low speed switch is pressed, auto-line delivery will alternate between ON/OFF.
4
Main Switch
• In this manual, when the following icon appears,
it means....
One touch
Double-click
2 2
More than 3 sec.
Press the pointed button for less than 3 seconds.
Press the pointed button for more than 3 seconds.
Press the pointed button twice continuously (double-click)
Main switch for continuous winding, and frequent winding.(The red switch component names are described on the right)
Press once:
One touch continuous motorized wind-up will start.To stop, press once.
However, after stopping at gunnel, it willwork only when you press and hold.
When you press twice (double click)
Double-click
2
at depths of 6.1m or more, and the motor willwind up the line until you release the button.Double-click for continuous wind-up.
For both the above, adjust the speed with speed switch.
Press bothsimultaneously
Press bothsimultaneously
More than 3 sec.
To switch to double-click mode...
Press the HIGH and LOW buttons at the same time for 3sec. or moreto exit the continuous wind-up mode and allow double-clickoperation. To return continuous wind-up mode, press theHIGH and LOW buttons again at the same time for 3 sec. ormore. Even if the power is cut-off, it will not return to theoriginal operation before you do this.
Speed indicator mark changes like this.
Continuous winding Double-click
5
Component Names
DDL (Direct Drive Level Winding)When winding up, do not get your finger caught.Be careful
Star dragWhen the fish is pulling hard, to avoid pre-matured cut, the line delivery force is adjusted
Spool control knobApply brake on the spinning of spoolto prevent backlash during hook dropping
ON
OFF
Power source (remove the water protection cap when using).
Digital counterSpeed switchMain switch
Strong
Line-holderDevice to hold the line
It will be ON when you right-turn (clockwise) the handle,or you push it back manually.ON: Winding-up the hookOFF: Free the spool and drop the hook
Safety level wind cover
Weak
Clutch
6
Power Source & Cord
1 Handling precautions
PowerThe power source is 12V DC (Direct Current). (The capacity forusage is above 16,000mAh). Unspecified power source (such asAC 100V for household, or 24V DC available on board the vessel)cannot be used at all.Absolutely do not use battery charger.
CHARGER
BATTERY
DC12V(16000mAh) AC100V DC24V
• When using the power source on board, make sure that thevoltage is 12V DC (not directly from the vessel’s battery, but useDC-DC Converter, from 24V to 12V). And when the battery polesare rusted, it may affect performance of reel, so remove the rustfirst before using.
• Use only battery that has been fully charged.
• After fishing, to protect the battery life, charge up first beforestoring. And before going out for fishing again, charge it upagain before using.
• After using for a while, the charging capacity may deteriorate. Inthat case, replace the battery only.
CordWhen connecting to battery, always use Shimano genuine cord.
Precautions: When using non-genuine cord, the reel may notperform as expected. Besides that, do not misuse power cord.If you step on it, fold it, or bend it, damage may occur.
2 Connection to battery
1 First connect the cord supplied to the battery.As shown in the drawing, red clip to (+), and black clip to (-).
2 Next, connect reel to power cord.The recess of power cord to the protruding reel power connec-tor, then press in and fasten the screw.
For explanation purpose, the direction ofconnector recess is facing the opposite side.
7
Line setting
1 Pass the line through the level winder.When passing the line, use the line-passing pin supplied.
2 Tie the line to spool pin.The recess of power cord to theprotruding reel power connector, thenpress in and fasten the screw.
Line passing pin Spool pin
Learning Method
Mode switchingEvery time you press the mode switch, it will switch as shown below.Select the mode that matches the type of line used. (See explanation in the next page).
To operate it, power source 12V must be connected
Motorized Standard mode
Specify mode
Press once
Press oncePress onceNot applicable to this model specifications.
Wind-down mode
Press once
Learning mode
Used for winding Shimano ANTARES 50lbs.-600M
The reel will learn using the supplied line.
Return to Standard mode
Used in actual fishing. When power is ON, this is the condition.
Beep
Beep
Beep
Beep beep
8
Learning Method
S L S
Things you should do before starting to wind is explained in the flow diagram below.“As shown here, there are 2 methods available (1~2 ). For detail explanation of each method, refer to respective pages.”
It can be operated only if 12V power source is connected.
Finish
Finish
When winding line other than Shimano Antares 50lbs.-600m (See P.9-10)
When Shimano ANTARES 50lbs.-600M can be wound (See P. 11)
Line winding starts ~ finish
Winding-up with Main Switch
Press mode- switch once
Learning mode
Press mode-switch twiceSpecify mode
Line winding starts ~ finish
It will stop automatically 10M before the end of 600M.
Press MEMO/0 SET button for 3 sec.
or more.
Connect the supplied 10m line, and wind manually
Winding-up with Main Switch
Wind all line being used and press
MEMO/0 SET button for 3 sec. or more.
Wind the remaining line and press
MEMO/0 SET button for 3 sec. or more.
Pull out and remove the
connected line.
9
IMPORTANT: The up-winding tension should be 3.Note: Counter value error will become large when tension is not accurately matched during learning.
Indicates revolution (RPM)
Learning Method (The actual figure of the line used will be memorized in the reel)
S L S
When the line remaining is short, �be careful not to let the line-end goes �right in.
1 Switch on the clutch lever.Then check power connection.When the mode-switch is pressedonce with something that looks like aball pen, “学習 (Learning)” will bedisplayed, and you are in Learning mode.If you press the mode-switch more thantwice, it will turn into Specify mode orDown-winding mode. To return to Learn-ing mode again, you have to press a fewmore times.
Winding speed can be adjusted with speedbutton.When you want to stop the winding, press themain switch one more time.
When the remaining line is short, the line end(above drawing) should not be wound in. Becareful here. If necessary, use your hand to wind.If the end is wound, correct input becomesimpossible to get.
1 When winding line other than Shimano Antares 50lbs.-600m (use Learning mode).
Beep
Press once
Continue to Next Page
2 Press the Main switch, and wind the line.The RPM will be displayed.Line tension is shown at left-bottom,adjust till you get figure 3.(Using a wet towel apply tension andwind the line. Do not apply tensionwith bare hands. Doing so can resultin injury. )The figure shows the tension of winding-up line, and expressed in figure. Thefigure is not equal to kg.
10
More than 3 sec.
Beep beep
More than 3 sec.
Beep beep
Connect
Supplied 10 m line
10~20cm
5 Wind the newly connected 10M linemanually.The RPM is shown one step lower.
To end Learning, press the Memo, 0-setting button for more than 3 seconds.“セット (Set)” will appear.
If the mode switch is pressed by mis-take while the input is being done, the datahalf-done will all be cancelled. In that case,pull out the line, and re-do from Step 1 .
About 10cm
3 Connect the end of the line alreadywound to the supplied 10m line.
4 After positioning in the physicalrelationship of the figure, press theMEMO/0 SET button for 3 sec. or moreonce the winding has been fullycompleted.The display will be as shown above.
6 The display returns to Top Mode.(The figure from the counter and the actualline length may differ by a max. of �3%.)
7 Wind up the 10M line that has beenpulled out.
Precautions: When winding line such asNylon, the inaccuracies of counter mayexceed �3%.
Note: Learning inaccuracy may resultin count error.
11
Learning Method (Line data input can also be used)
2 When Shimano ANTARES 50lbs.-600M can be wound (use Specify mode)This reel carries the input data of Shimano ANTARES 50lbs.-600M winding.When winding this material, use the following operation.
3 When line winding is complete,press Memo, 0-setting buttonfor more than 3 seconds to endLearning.The display is shown above.
If the mode switch is pressedby mistake while the input is beingdone, the data will be deleted Inthat case, pull out the line, and re-do from Step 1 .
Press twice
BeepBeep
IMPORTANT: The up-winding tension should be 3.Note: Counter value error will become large when tension is not accurately matched during learning.
More than 3 sec.
Beep beep
Note: The display monitordepicted is that for theJapanese model.
S L S
1 Press mode-switch twicewith something that lookslike a ball pen.“指定 (Specify)” will light up asshown in the above drawing,you are in Specify mode.If you press the mode-switchmore than twice, it will turn intoDown-winding or Learningmode. To return to Specifymode again, you have to pressa few more times.
4 The display returns to TopMode, and Learning ends.
Note: Learning inaccuracymay result in count error.
Precautions: When using lineother Shimano Antares 50lb.-600m,the inaccuracies of countermay exceed �3%.
2 Now we start winding the line.Do the winding with line tensionshowing 3. It will stopautomatically 10M before the endof 600M.(Using a wet towel applytension and wind the line. Donot apply tension with barehands. Doing so can result ininjury. )Wind the remaining 10Mmanually.
12
Sequence (for faster, effective use of 4000 HP)
Zero-setting
When the hook is on thewater surface, by pressingone button only, 0-metersetting is done. Hook canbe dropped to the exactdepth.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For details, see P.16
Motorizedup-winding
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For details, see P.21
To change bait, or when ithit something, just pressthe Main Switch to up-windeasily.
Re-connect hook, lower it towater surface, and press 0-setting button for more than3 sec.Simple way to get cut linerestored.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For details, see P.18
Line cut
Erect pole and the hook willcome back to you at exactposition.The gunnel stop functionwill secure it.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For details, see P.19
Gunnel stop
Once I know this,I’ll be able to useit.
Simple and
convenient
The more youknow, the wideryour fishingworld
Simple
Convenient
Even more
Convenient
Zero-setting
Line-cut setting Gunnel stop
Hi-speed
13
There are 3 main types of functions in 4000 HP. Select one that suits your fishing method.
For details, see P.23○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Depending on fishingarea, fishing method, andtarget fish, the counterdisplay can be switchedbetween “Bottom Mode” to“Top Mode”. Rack waterdepth is known immedi-ately.
Switchingbetween Top
Mode andBottom Mode
Top & Down
Rack
Bottom
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For details, see P.22
The depth of rack is auto-matically memorized. Youcan reach exactly the samedepth each time.Manualsettting is also possible.
Hook-setting
Rack memory
Speed Switch
One touch alone willenable you to select from15 speeds.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
For details, see P.21
One-touch
One touch
14
Various techniques (Introduction of various techniques. A must read if you want to improve your catch significantly)
• Normally, by tightening the spool control knob, the spool free-spinning becomes a bit sluggish, and depending on vessel’s up-downmovement, backlash can be prevented.
• However, to drop the hook faster, do not use the knob, use yourfinger instead.
Apart from that, the following methods can also be used.
• Use the auto-line delivery function of this Dendoumaru 4000 HP.When the hook drops more than10M, the Motor Switch will be ONautomatically. As a reaction to the turning of motor, the spool will turnin the direction the line comes out.When you return the clutch, the motor will stop turning automatically.And, when you press the Main Switch while the line is being delivered,the delivery will stop.
• Aim the pole tip downward. By erecting the whole pole, you canreduce the guide resistance.
• The auto-line delivery function is factory-set. If you want to delete itdue to guide resistance and backlash, press the lower part of theSpeed Switch for more than 3 seconds. “糸送り (Line delivery stop)”indicator will light up, and the function cancelled.(Speed display will return to its original state).When you want to use the function again, repeat the operation.Before you repeat it, the status will continue to show “糸送り (Linedelivery stop)” even if the power is cut off.
Technique to drop hook fast.(Effective when you are looking for squids)
More than 3 sec.
Application 1
15
Motorized method is smoother thanmanual during up-winding.In addition, when using thistechnique the fish will not bescattered.
• Remove pole from rod-keeper,and hold it with your hand.
• Adjust the drag so that themotorized up-winding is a bitslippery with the vessel’s up/downmovement and the pull of fish.
• Move the pole-tip up and down toabsorb the vessel’s up/down move-ment due to wave. By doing that, theup-winding speed is more stable.
Technique to avoid fish from scatteringduring motorized up-winding.
This is the technique to wind empty hook fast whenretrieving or changing fishing point. Select high speedon the Speed Switch. Besides motorized winding, useyour hand to wind too to speed up. (When doing that,it is easier to have the rod-keeper attached to thepole).
Technique to retrieve hookfast using motorized plus
manual method.
Application 2 Application 3
16
When the hook is on the surface of water, do the zero-setting
Zero-setting (Always do it before you start fishing)
Zero-setting
To reach the rack exactly.
To improve your catch
result, it is essential to
get to the rack exactly.
To do that, do zero-setting.
Zero-setting means setting of 0-Meter
when the hook is on the surface of
water.
By doing zero-setting, the rack depth
can be reached exactly as the rack
position depth is displayed.
17
Let’s try to do zero-setting.
1 Adjust the hook to water surface, andpress 0-setting switch for more than 3sec.(Above drawing shows the Top Mode)
2 As shown above, the display haschanged.
3 When “0セット (0-set)” disappears, itmeans 0-setting is complete.
More than 3 sec.
Beep beep
18
When there is a line-cut, repair can be done easily.
Line-cut repair
1 Up-wind till the position the cut oc-curs.
2 Set the hook and adjust to the watersurface, and press 0-setting switch formore than 3 sec.
3 By doing that, the computer willchange the program automaticallyaccording to the actual measuredvalue displayed from the point of cut.
Hi-speed
More than 3 sec.
Beep beep
19
Gunnel stop
After motorized up-winding has stopped, when the pole is erected,the hook will stop in front of you.After gunnel stop, whenthe pole is erected, the
hook is set to return automatically tothe position in front of you.
Shipslide stop After the power is ON, initially it
will stop 6M from the gunnel. From the2nd time onwards, the computer willjudge automatically the previous stopposition of hook.
(This function works within 1-6M).
20
4 Meter from gunnel stop position, the alarm will sound (Beep).
1 4 meter from the stop position at the gunnel, alarm willsound, after that at each 2 meter.(The drawing shows Top Mode)
2 Gunnel stop position ( in this case 3.0m) : alarm will soundtwice, and winding stops automatically.After gunnel stop, by erecting the pole, the hook will be infront of you to pick up promptly as shown in the abovedrawing.
The number changes according to the load.
Beep Beep Beep
21
Press this to wind faster
Press this to wind slower
Motorized up-wind & speed-switch usage
Here will appear set ofmotorized up-wind
Winding up using motor power. The most basic operation.
To switch to double-click mode...
Press the HIGH and LOW buttons at thesame time for 3 sec. or more to exit thecontinuous wind-up mode and allowdouble-click operation.To return continuous wind-up mode, pressthe HIGH and LOW buttons again at thesame time for 3 sec. or more.
Hi-speed
One-touch
Double-click
2
Speed indicator mark changes like this.
Continuous winding Double-click
1 Drop the hook, andswitch ON the clutch.(Above drawing shows TopMode)
2 When replacing bait, orwhen it hit something,press the Main Switchtwice continuously towind up with motor.
3 Adjust up-winding speedwith Speed Switch.For bait replacement, orclearing obstruction, it canbe done fast for fasterreturn.
22
Rack setting
Lower the hook to the depth to be memo-rized (more than 6.1m), then press MemoSwitch for less than 3 sec.Above drawing shows water depth of 76.3mfor the rack. This setting can be changed anynumber of times you like.When the memorized water depth isgreater than 10.1m, “Memo Alarm” willannounce when the hook reaches thatposition.(Both Top Mode and Bottom Mode)
Precautions:When Memo is not pressed, normally it will notbe displayed.
Rack memory
One touch
Beep
Putting the hook exactly at the rack willincrease efficiency sharply.
23
Two-way handling of rack: from top and bottom
Mode Switching....The trick to improvecatch result is to drop thehook exactly to where the
fish is (the rack).The latest high-performance fish groupsensor can detect the exact water depthof fish.Normally, the vessel captain will advisethe position of this rack. In this case,depending on fishing area, fishingmethod, and the catch expected, therack can be indicated from the water
• Press the Top/Bottom Switch.The Top Mode and Bottom Mode willswitch alternately.If “Bottom Mode” is selected, “底(Bottom)” indicator will light up.For “Top Mode”, there is no indicator.
Top & Downsurface, or from the bottom (oceanfloor).The NEW DENDOUMARU 4000 HPhas both the convenient “Top Mode”to indicate from water surface, or theequally convenient “Bottom Mode” toindicate from the bottom. Alternatethese two modes to suit your fishingpurpose.
One touch
Current water �depth
Rack
BottomBottom
For convenience, it can be from top or bottom.
24
Top Mode fishing example
4 When re-dropping, “Memo Alarm”will announce when the hook hasreach the rack position.
2 Wind the hook and bring it up to therack.(Above drawing shows Top Mode)
3 Press the Memo Switch to memorizethe rack position
1 Drop the hook to the bottom first.
Rack
Bottom
Up-winding
Re-dropping
PressMemoButton
Taking from the bottom
Announcingrack positionwith Memo Alarm
Beep
Beep beep
Beep
Beep
• Captain indication: 55m from top
25
Bottom Mode fishing example
Explanation: When the Captain says “So many meter from the bottom”,you drop the hook first to the bottom, and wind the hook up for the meterspecified.(Normally they wave during this moment)At fishing area where the fish follow the bottom contour, when dropping thehook, go right to the bottom first before coming up again to locate the rack.
1 Drop the hook to the bottom first.
• The lower row shows the depth from top.
• At the same time, the present depth is 0.0m. When the reelwinds up, it becomes a positive count indicating the depth fromthe bottom.
Up-windingspecifiedm-depth
Rack
BottomBeep
Beep beep
Beep
Beep
Initial drop
* When dropping hook,water depth from thetop is indicated
Up-winding
Re-drop and reach the bottom, then press Memo Button. • The lower row shows depth of 63.3m.• At the same time,the present depth is 0.0m.
3
Re-dropping
1
Specified m-depth.Up-winding
2
For the remaining depth, once it reaches less than 10m, depth indication will be switched to Top Mode showing up-winding stop measurement.
(Previous depth)
PressMemo Button
• Captain indication: 2m from bottom
26
Handling precautions / Safety Features
DENDOUMARU is built with precision components, so please pay attention to the following when handling it.And after your fishing trip, do take care of it for long-life use.
1 Reel protection
• Dirt that sticks to the reel of Dendoumaru 4000HP has to beremoved, and the bearing can be oiled.Preparation: Reel, neutral cleaning solution, sponge.
1. Remove dirt with cleaning-solution-soaked sponge, and tapwater.
2. Rinse down the cleaning solution. Hose down between spooland the unit, then disengage the clutch and pull out 2-3m ofline. (Refer to drawing on the right).By doing that, salt content that sticks to spool bearing will beremoved.
3. Dry it up.
* Do not immersed in water to wash.
2 Use precautions
• When stuck, do not pull the pole or reel with force. Use towelto cover it and leave no line at fishing area if possible whenyou pull it out.
• Handle the reel carefully. When shifting position, especiallywhen leaving, take care not to cause damage due to frictionwith other tools in the bag.
2.
• Do not drop and avoid shock to the reel.
• During erection on the boat, when short of space, do not subjectthe back side of the reel and power cord to shock. And do notfold or bend the cord, especially when the cord is in-between thereel and gunnel.
• Depending on the deflection of glass, the counter LCD screenmay not be clear.
27
3 How to maintain
• To prevent rust on the connector, cover it up when not in usewith the cap for water prevention.
• Dirt and sand that stick to the component should be removed,then dry it. And do not immerse in water.Do not use volatile solution such as thinner, benzene, etc.
• Do not dismantle the reel. Inside there are motor, breaker, andother electrical components. It may cause damage.
• Do not apply oil to the drag area. Otherwise the drag capabilitymay drop.
• If you keep for long at a place with high temperature and highhumidity, the shape may change and the strength deteriorate.For long period storage, after the above maintenance has beendone, keep it in a location with good ventilation.
Apply grease throughthese 2 holes
Screw
4 Safety features
• Self-recovering breakerWhen the motor is overloaded, to protectthe motor, the breaker will work.When the breaker works, and when itrecovers, there will be alarm sound an-nouncement. When the breaker works, allindicators will blink as shown on the right.
• When doing your own dismantling or repair, do not get your fingers cutby the sharp edge of component.
• The reel unit, especially the counter, shouldnot be immersed in water. (The counter iswater-proof under normal specification, butto avoid trouble, do not immerse in water).
• The reel you have now is meant for long lifeservice, and a special grease has beenmade for that purpose. Apply it through thetwo holes of power cord terminal as shown in the drawing.
• Battery detection indicatorWhen battery voltage drops (approx.10.5V), cordand connector contact will be affected, and thebattery icon will blink. (Drawing A).
And, when the volatge is above DC 21V, “Err” willappear. (Drawing B). (Fif. A)
(Fif. B)
28
Specifications / Product inquiry , After-Sales-Service
• Product codeThe product code is printed on the Instruction Manual, Detail Drawing,Package bottom, and the Product itself (the first 5 digits)
5 Specifications
Model
Dendoumaru4000HP
Line volusing Shimano ANTARES
50lbs.(0.32m/m)-600M
Weight(g)
1180
Max. winding speed(cm/handle 1 rev.)
65
Motor up-winding speed (m/min.)
Max. speed 150+130~10-14 speed. Total 15
Spool (mm) (dia x width)
68/61.5
Ballbearing
1
Max. drag (kg)
13
Gearratio
3.1 :1
Code
1RG154000G
Supplied accessories: Cord, cloth bag, instruction manual, exploded parts diagram, line pin, grease, oil, 10m line.
6 Power sourceThe power source is direct current (DC) 12V. (Capacity above 100V, vessel DC 24V cannot be used.16,000mAh). Unspecified power source such as household AC Battery charger also cannot be used absolutely.
7 Product inquiry, After-Sales-ServiceExplanation of reel mechanism may not be too clear on paper.For inquires through letters, always provide your telephone number.
• When you send for service, leave it at the shop you purchasedfrom. In such case, always describe the repair position, trouble(e.g. the stopper does not work).”And, when there is no Shimano sales agent nearby, contact ourHead-office or Fishing Tool Service Dept.Please understand that for servicing, besides spare-parts fee,service fee is chargeable.
• When you repair by yourself, please refer to Detail Drawing toplace an order for spare-parts and spool, describing productname, product code, spare-parts no., and spare-parts name.(For internal parts, as they are complicated, we recommend thatyou leave the repair of the reel to us.
Example:
Product name : Stella 1000 Spare-part No. : 2Product code : SC66B010 Spare-parts name: Spool
29
Troubleshooting
There is display on the LCD, but the motor does not work.
Check if the battery capacity is sufficient.* If it works when the motor speed is low, but not when the speed is high, then it’s may be due to battery capacity. Check again after battery re-charge. But if after re-charging it still doesn’t work, then the battery is probably too old. Use new battery and check again.s may be due to battery capacity. Check again after battery re-charge. But if after re-charging it still doesn’t work, then the battery is probably too old. Use new battery and check again.s may be due to battery capacity. Check again after battery re-charge. But if after re-charging it still doesn’t work, then the battery is probably too old. Use new battery and check again.
Problem
Even when connected to 12V battery, there is no LCD display.
Line winding learning is not set.
Even if line has been delivered, the counter does not move.
The error is large.
Check if battery and power cord’s (+) and (-) terminals are connected properly. Also check if battery capacity is sufficient.
LCD totally black, and all characters appear.
When exposed to high temperature environment (like in car trunks), it may happen. Reduced the temperature and it will return to normal.
It’s a bit troublesome, but return to learning, and check.
It’s a bit troublesome, but return to learning, and check.
It’s a bit troublesome, but return to learning, and check.
Solution
The counter display and line water depth color does not match.
Depending on type of line, there is some difference, but due to line stretch during use, it may not match counter display because of slip.
The motor stops in the midst of up-winding.
Check if the screw of power connector is properly tightened.The terminals of vessel power source and the connector of reel and power cord may be rusted causing poor connection. Check again after removing the rust.
P.6
Reference
P.6
P.7-P.11
P.7-P.11
P.16-P.17P.19
P.7-P.11
P.6
The gunnel stop position is different. It may be caused by up-winding tension and line stretch. Do zero-setting on the surface. And for the set that can memorize gunnel, the range is 1-6m.Sets that has 0-1m setting range should be set at 1m for safety reason.
If it still does not work after the above has been done, then bring it to the dealer you purchased the set from.Fill in the Repair Card and if possible describe the problems and send to Shimano Service Center.
30
Safety precautions
PRECAUTIONS
• Do not touch the spinning spool. It may cause injury.
• Do not dismantle or modify the motorized reel. It may cause damage or accident.
WARNING
Read it before you use.
• When using motorized reel, a very weak frequency will be dissipated. It may affect the function of medical device such as hearing aid and pacemaker. It may affect the user’s movement and visibility, especially for user that carries heart pacemaker, so please consult a doctor, the medical device maker or dealer on the effect of this motorized reel before using it.
• Do not put your finger close to level winding position where the line is led in. • Do not get your finger pressed between the reel body and its handle, it may cause injury.
• Use only specified voltage (12V) from battery or vessel power source. When you use different voltage, the motorized reel may heat up and your hand burnt.
31
This manual uses recycle paper.
GRPRINTED IN JAPAN
IMPRIMÉ AU JAPON(030225)
04
(030821)･LINE PASSING PIN
