Optional extras for your stand

Choice to create and present your environment

Basic Shell Scheme

Shell Dimensions

Panel Dimensions Post Sections Posters & Panels

Ceiling Grid Layout

Beam Sections

Name Panel

Fascia

Ceiling Beams

Modular WallPanels in white

Intermediate supportOn all frontages in excess of 4 metres

Corner Support

The illustration depicts typical sites. Check your ownspace allocation for dimensions, number and location ofopen frontages etc...

2430mm toUnderside of ceiling beams

2500mm

300

4000mm Maximum Unsupported Span

990

2430mmNormal

AluminiumCeiling Beams

990mm tocentres of poles

950mmto insideof poles

2480mm 2340mm

2500mm40mmDiam.Post

Panel Size2354mm x 970mm

Seen Size2340mm

x 950

70mmBeam

Adjustablefeet

40

404.5

16.5

16

4.5

7039

For yourpictures under950mm wide

Using panelbrackets, fixyour display

panels acrossone upright

For your picturesover 950mm wide

CeilingBeam

990mm wide x 2.5m high wall panel sections

A post is added for stability on stands over 4m in length

Fasica Line

Shell Scheme Information

Do’s & Don’ts

We hope you find your shell scheme inorder. Please observe the do’s & don’tsassociated with this system.

The use of the following fixings is strictlyforbidden on this system.

NAILS / SCREWS / PINS /STAPLES / PAINTING.

Fixing is permitted by:-

Melamine / vinyl Panels

DOUBLE SIDED TABSVELCRO HOOK & LOOPPANEL BRACKETSHANGING CHAINS FOR HEAVY EXHIBITS

Loop Nylon Panels

VELCRO HOOKPANEL BRACKETSHANGING CHAINS FOR HEAVY EXHIBITS

HAVILLS

060 04 024 08 061 020

048 018 058 059 06 042

052 031 011 069 056 050

053 057 045 014 040 09

Primrose Yellow Alfa Red Leaf Green Graphite Grey Cornflower Blue Ink Navy

New Silver Grey Bottle Green Black Old Gold Orangeade Kingfisher

Lime Green Magnolia Dusky Pink Pistage Green Mint Green Sky Blue

Wine Waterlilly Royal Regal Blue Beige Wedgewood Blue

Q. I missed the deadline date on the order forms;Will there be a charge?

A. Deadlines are shown to encourage exhibitors to reply early. Surcharges will be applied toElectrical Orders only after this date (except late exhibitors). Furniture orders should bemade as early as possible due to stock levels. Place any other orders (name panels, shellscheme extras, etc) as soon as possible.

Q. Do I have to have the Fascia and Grid Ceiling?A. No. Please tell us in writing if you would like them to be removed, however if a wall is over

4 metres in length and doesn’t back onto another shell scheme, bracing may be neededfor stability.

Q. What do I need to order to create a storage area in the corner of my stand?A. To create a 1metre wide x 1metre deep store you will need to select 1 x wall panel (WP)

and 1 x Lockable Door Section (EWD) or Entrance Way Curtain (EWC) on the order form(shell scheme only).

Q. If I want to change the colour of the wall panels, what are the options?A. Shell scheme walls are usually White PVC but there is the option of covering the panel

with Display Loop Nylon (Velcro Compatible) or X-film (Vinyl Covering) on one side beforethe panel is set in the framework. The colours available are shown opposite.

Q. How do I calculate how many panels I have on my stand?A. Shell scheme walling is made up of 1metre wide x 2.5 metres high sections. Therefore, if

your stand has a back and sidewall (a corner plot) and the stand size is 4 metres x 4 metresyou have 8 panels.

Q. I would like to cover the shell scheme panel with my own graphics, what isthe size of the wall panel?

A. The visible panel size is 950mm wide x 2340mm high.

Q. What is the seen size of half a metre wide panel?A. The visible area is 455mm wide x 2340mm high.

Q. I have lightweight posters or pictures, how do I fix these to the wall panels?A. Velcro or sticky pads are the best options, (blue-tack doesn’t work) these can be

purchased from our Service Desk during the exhibition.

Q. What if my panels are over 1metre wide?A. You can use Velcro running up the support poles (Provided that you remove it afterwards)

attach your panels and then stick polystyrene strips (20mm) behind, between the supportpoles to give rigidity. Alternatively, you can hire 50mm x 25mm wooden battening on theorder form.

Q. I have heavy panels, how do I fix these to the shell scheme?A. Under 992mm wide: using brackets fixed into the upright grooves across 1 support pole,

or hook and chain. Over 1metre wide: using brackets fixed into the upright grooves across2 support poles. Panel brackets are available from our Service Desk during the exhibition.These will support up to 20kg – for anything heavier please contact the Sales Team.

Q. I would like to drape the interior of the shell scheme with a material such as muslin, how do I attach this?

A. You will need to order muslin batten, we will then fix this on the top ofthe framework – this can then be stapled to.

Q. I would like to clad the interior of the shell scheme with foam board/chipboard, how do I calculate the measurements?

A. Please call our Sales Team if you require assistance. Alternatively, you can order chipboardfrom us for which the charges include installation.

Q. I would like to change the colour of the carpet, what are the options?A. You can change the colour of the carpet to another colour in the same range for a small

charge (providing we are the contractor) please contact our Exhibitor Sales Team.

Q. I cannot find exactly what I am looking for,do you hire out any other items?A. Please contact your Show Manager with any requests and we will try to meet with your

requirements

Your Questions AnsweredOptional extras for your stand

Why not change the colour of yourstand?

Stand panels can be covered to suityour theme or match your companycolours in a variety of materials, soadding to the appearance and impactof your stand.

Display Loop Nylon Vinyl Covering (X Film)

The Colours shown on this page are as accurate as the printing process will allow.

Your Melville shell scheme stand can be enhanced with a range of optionalfeatures to create the perfect environment for displaying your products or services, including a comprehensive range of colours and materials which will make you stand out from the crowd.

Muslin ceiling MCCreate that intimate atmosphere on yourstand. Available in white or other coloursincluding black on request

Display PanelsAvailable in two sizes DP1 = 1M X 1MDP2 = 2M X 1MWith a variety of colours available displaypanels can be used for graphics and smallexhibits. Fixing can be with hook Velcro orpins.

ShelvesAvailable either flat FS or sloping SS 992mmx 300mm ideal for exhibits or literature.Maximum loading 30kg.

Literature Dispenser LDIncorporating four sections of A4 size, overalldimensions are 992mm x 300mm

Garment Hanging Rail GHRA simple rail 992mm

Coat and Hat Rack CHWith 4 hooks. 992mm

Nightsheets NSAlthough not a security device night sheets act as a deterrent and aresupplied with a padlock.

Enclosure Partitioning WPThese panels are required to create separate storage orcloakrooms or office areas.2.5m x 992mm

Door EWD or Curtained Entrance EWC2.5m x 992mm

Slat Wall Panel SWP2.36m x 992mm hooks not included. (not shown)

Pegboard PGBHooks not included. (not shown)

Raised Platform RPPlatform with 100mm black painted skirting covered with18mm ply. This is a convenient way to conceal pipe work,cabling or plumbing.

Floor Flats(FF)Required when the venuealready has carpet andyou wish to have yourown carpet laid over thetop.

Computer Plinth CPAluminium framework 1 metre high x500mm wide x 500mm deep with cablemanagement to the white melaminetop. Other sizes available, please call oursales office.

Curved Reception Counter CRCAluminium framework 1 metre high x 1metre wide x 500mm deep (overall) withsemi-circular internal shelf and whitemelamine top.

Corner Shelf CSAluminium framework 1 metre high x 1.4metres wide to fit into the corner of theshell scheme, consisting of one floor-supported white melamine shelf.

Lockable Counter Unit LCUAluminium framework 1 metre high x 1metre wide x 630mm deep with whitePVCinfill panels, white melamine top,internal shelf and lockable sliding doors.

Large Reception Counter LRCAluminium framework 1 metre high x 1.4metres wide with 660mm wide sidepanels (exc. Curved front) with tieredwhite melamine top.

Sink Unit SUAluminium framework 1metre high x 1metre wide x500mm deep, singlestainless steel sink set intowhite melamine worktop.EXCLUDES WATER & WASTE.Please contact the venue.

Coat and Hat Rack CHWith 4 hooks. 992mm wide(CH)

Shell scheme information