SHELL OFFSHORE RIGSTRAINING CENTER

Shell Off-shore Training Programme in Gdańsk

In 2006 we been asked by Shell EP Europe for delivering high qualified staff for anticorrosion works.

Based on Shell requirements we decided to open Training Center for Anticorrosion Works in Gdańsk, Poland.

Detailed requirements covers various worldwide recognized standards provided by NORSOK/FROSIO, NACE, ASTM.

After months, we gained the experience in trainings sessions throughout several months an we are very well organized.

Each person has individual training programme, that has to be completed and certified. Tranings are combinated with work practice in the Polish and foreign shipyards.

Trade assessment – Theoretical Facility

Ambient conditions measurement using different methods,Surface preparation examinations,Salt contamination test,Coating defects examinationDFT measurements,Pull-off test,Reporting

During course participants becomes familiar with differentinspection equipment and methods such as:

Trade assessment – Practical facility

Practical part of the Trade Assessment improves the qualifications of workers, prepares them to work in the specific conditions in shipyards, rafinerys, electric power plants, etc

Practical part of the Trade Assessment improves the qualifications of workers, prepares them to work in the specific conditions in shipyards, rafinerys, electric power plants, etc

Trade assessment

Trainings in Gdańsk accepted by Shell

Shell, have repeatedly expressed their interest that we should not deviate from the standards and /or the programme set to achieve the levels of operational support, required by Shell.

That's why our practical facility simulate real job conditions.

Trainings in Gdańsk accepted by Shell

Rope access training is one of the tranings, which prepare workers to work at hight. Ropes are one of the technics of acceess to the workplaces on the platforms.

Shell stresses the importance of both English language and Health & Safety. Both trainings are connected with each other and have essential influance on the safety at work.

English classes and Health & safety courses

Our workers have all required byOil Companies certificates:

Trade assessment – blasting and painting theory, according to Norsok M-501/ASTM D-4226 in most cases covered by IMO/IACS req. MSC 215.82 provided by Sincor Services

● Inspection of Protective Coatings (Sincor Services)● Hand tool management course and trainings (Sincor Services)● IRATA rope access training – level 1 (AquaTerra)● Health and safety courses (Sincor/Muehlhan) ● Risk and COSHH courses (Muehlhan)● Working at height course (MGB)● BOSIET training (Nogepa and Opito – Nutec Holland)

Trainings and courses - certificates