-
With adjustable shelving and modern styling, this desk is ideal
for a dorm or apartment. Just pick up a few key items from Rockler
and some lumber at the home center and you’re ready to build! SHELF
DESK
GET FROM ROCKLER
Stock # Item32991 Rockler JIG IT® Shelving Jig and 1/4" Bit
Set47516 Rockler 3/8" Dowel Drilling Jig Kit30601 2" Flat Head
Confirmat Screws (1 pk.)21139 3/8" x 11⁄2" Spiral Dowel Pins (1
pk.)99433 White Heavy Duty Steel Shelf Brackets 11 1⁄2" D x 8 1⁄8"
H (2)22773 1/4" Nickel Shelf Pin Supports (2 pks.)45929 1/2" Rubber
Bumpers (2 pks.)50179 Titebond Original Wood Glue, 8 oz.
OTHER MATERIALS
• Three 1" x 8" x 8' solid wood boards (actually 3/4" thick x 7
1⁄4" wide by 8' long)
• MDF or other sheet material• Twelve #10 x 3/4" pan-head
screws• Your choice of finish
www.rockler.com800-279-4441
53114 Rev. 7/14 © 2014 Rockler Companies Inc.
-
1. CUT THESE PIECES
3. BUILD SHELF CASE
2. DRILL SOCKETS FOR SHELF PINS
SHELF DESKCommon materials and a few Rockler products make it
easy
3/4" THICK OAK 3/4" THICK MDF or ALTERNATE MATERIAL
71⁄4"
71⁄4"
53⁄4"
71⁄4"
71⁄4"
46"
x4 x1 x1x2
x2
x2
x3
x4
48"
287⁄8"
Rockler 3/8" Dowel Drilling Jig Kit47516
Rockler JIG IT® Shelving Jig and
1/4" Bit Set 32991
3/8" x 11⁄2" Spiral Dowel Pins 21139
323⁄4"29"
24"
24"
x18
Secure dowels with wood glue
Make sure all holes align, or shelves won’t be level
Drill 7/32" pilot holes for screws to attach desk
53114 Rev. 7/14 © 2014 Rockler Companies Inc.
-
5. ATTACH DESK TO SHELF CASE
6. INSTALL SHELVES
SHELF DESKCommon materials and a few Rockler products make it
easy
x4
4. ASSEMBLE DESK
x2
x6
x2
x3
x28
1/4" Nickel Shelf Pin Supports 22773
1/2" Non-Skid Rubber Bumpers 45929
2" Flat Head Confirmat Screws30601(Use 4mm hex drive)
White Heavy Duty Steel Shelf Bracket 99433
Drill 7/32" pilot holes for screws
Drill pilot holes for screws
Place shelf pins to locate shelves as desired
Important: Do not sit on desk; it is not designed to support a
person’s weight
Extend pilot holes for screws from case into side of desktop
7. ATTACH FEET
53114 Rev. 7/14 © 2014 Rockler Companies Inc.
![SUD- Instructions: STEP 1. KBTRAY- STEP 2: s STEP 3: Set ... · STEP 2: s STEP 3: Set shelf to desk. Hand tighten clamps to desk. [68.4mm] 2.69in On under side of tray, attach L-Brackets](https://img.pdfslide.us/doc/110x75/5ed655237998195daf29d839/sud-instructions-step-1-kbtray-step-2-s-step-3-set-step-2-s-step-3-set.jpg)
