Order codes: EQLED367 - Black Housing

EQLED367A - White Housing

ShardUser Manual

www.prolight.co.uk Shard User Manual 2

Safety advice

WARNINGFOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP!• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.

• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.

• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessaryfortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.

• Pleasenotethatdamagescausedbyusermodificationstothisequipmentarenotsubjecttowarranty.

IMPORTANT:The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.

OPERATING DETERMINATIONSIfthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageandthewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.

Donotendangeryourownsafetyandthesafetyofothers!

Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.

CAUTION!KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS

CAUTION! TAKE CARE USING THIS EQUIPMENT!HIGH VOLTAGE-RISK OF ELECTRIC SHOCK!!

• Neverletthepowercablecomeintocontactwithothercables.Handlethepowercableandallmainsvoltageconnectionswithparticularcaution!

• Neverremovewarningorinformativelabelsfromtheunit.

• Donotopentheequipmentanddonotmodifytheunit.

• Donotconnectthisequipmenttoadimmerpack.

• Donotswitchtheequipmentonandoffinshortintervals,asthiswillreducethesystem’slife.

• Onlyusetheequipmentindoors.

• Donotexposetoflammablesources,liquidsorgases.

• Alwaysdisconnectthepowerfromthemainswhenequipmentisnotinuseorbeforecleaning!Onlyhandlethepower-cablebytheplug.Neverpullouttheplugbypullingthepower-cable.

• Makesurethattheavailablemainssupplyvoltageisbetween100~240VAC,50/60Hz.

• Makesurethatthepowercableisnevercrimpedordamaged.Checktheequipmentandthepowercableperiodically.

• Iftheequipmentisdroppedordamaged,disconnectthemainspowersupplyimmediatelyandhaveaqualifiedengineerinspecttheequipmentbeforeoperatingagain.

• Iftheequipmenthasbeenexposedtodrastictemperaturefluctuation(e.g.aftertransportation),donotconnectpowerorswitchitonimmediately.Thearisingcondensationmightdamagetheequipment.Leavetheequipmentswitchedoffuntilithasreachedroomtemperature.

• Ifyourproductfailstofunctioncorrectly,stopuseimmediately.Packtheunitsecurely(preferablyintheoriginalpackingmaterial),andreturnittoyourProLightdealerforservice.

• Onlyusefusesofsametypeandrating.

• Repairs,servicingandpowerconnectionmustonlybecarriedoutbyaqualifiedtechnician.THISUNITCONTAINSNOUSERSERVICEABLEPARTS.

• Thislightingfixtureisforprofessionaluseonly-itisnotdesignedfororsuitableforhouseholduse.Theproductmustbeinstalledbyaqualifiedtechnicianinaccordancewithlocalterritoryregulations.Thesafetyoftheinstallationistheresponsibilityoftheinstaller.Thefixturepresentsrisksofsevereinjuryordeathduetofirehazards,electricshockandfalls.

• Warning!RiskGroup2LEDproductaccordingtoEN62471.Donotviewthelightoutputwithopticalinstrumentsoranydevicethatmayconcentratethebeam.

• WARRANTY:Oneyearfromdateofpurchase.

www.prolight.co.uk Shard User Manual 3

Product overview & technical specifications

Thishighoutputmoonflowerispoweredbya60WOsramOstar™quad-colourRGBWLED.Thehigh-techShardproducesanintensearrayofcolourscombinedwithpinsharpbeams.Severalbuiltinshowsallowtheusertoselectfastenergeticmovementsandcolourchangesoraslowconstantrotationtoemulateamirrorballeffect.Theunitfeaturessoundactive,master/slaveandDMXmodesalongwithbuilt-inprogramsselectableviathe4buttondisplaypanelontherearoftheunit.AdditionallytheunitcanbecontrolledusingaCA8controller(soldseparately).

•1x60WOsramOstar™quad-colourLED(RGBW)

•DMXchannels:1/4or7selectable

•Soundactiveandmaster/slavemodesplusbuilt-inprograms

•0-100%dimmingandvariablestrobe

•OptionalCA8controller

•Suppliedwithhangingbracket

•4pushbuttonmenuwithLEDdisplay

•IECpowerinput/output

•3-PinXLRinput/output

•Convectioncooled

Shard

Specifications

Powerconsumption 83W

Powersupply 100~240V,50/60Hz

Fuse T1A250V

Dimensions 292x315x210mm

Weight 3.5kg

Ordercodes EQLED367-BlackHousingEQLED367A-WhiteHousing

292mm

315mm 210mm

www.prolight.co.uk Shard User Manual 4

Technical specifications

MENU ENTER

MIC

SAFETY EYE

UPDOWN

ON

OFF

POWER OUTPUT:100-240V~50/60Hz

DMX INPUT

REMOTECONTROL

INPUT

DMX OUTPUT

www.prolight.co.uk

POWER INPUT:100-240V~50/60Hz

FUSE: T1A 250V

03

04

02

09

08

10

01

12

06

07

11

05

01-Earthpoint

02-On/offswitch

03-LEDdisplay

04-Functionbuttons

05-Microphone

06-3-PinDMXinput

07-3-PinDMXoutput

08-IECpowerinput

09-IECpoweroutput

10-FuseT1A250V

11-CA8controlinput

12-Safetyeye

Inthebox:1 x fixture, 1 x power cable, & 1 x user manual

www.prolight.co.uk Shard User Manual 5

Operating instructionsOperating instructions

MENU

A 0 0 1

A 5 1 2A d d r DMX address setting

1 C h

4 C h

7 C h

C h N d Channel modes

N A s t

S L 1

S L 2

S L N d Master/slave mode

d N S t No DMX signal

N A S t

L A S t

b L n d

S h 0

S h 8S h N d Show modes

0

1 0 0S e n S Sound sensitivity

o n

o F FS o U n Sound active

o n

o F FL e d LED backlight

d I S P

d S I pd I S P Display invert

- - - -F h - s Fixture hours

- -t e N p Fixture temperature

t e S t Fixture test

u - -u e r Software version

www.prolight.co.uk Shard User Manual 6

DMX mode:

OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestflexibilitywhenitcomestocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthefixtureandeachfixtureindependently.

ToaccesstheDMXaddressmode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowAddrontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconfirmthesetting. Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

DMX channel mode:

ToaccesstheDMXchannelmode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowChNdontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseoneofthe1/4or7DMXchannelmodes.Pressthe“ENTER”buttontoconfirmthesetting.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Operating instructions

1 channel mode:

Channel Value Function

Pleasenote:AllshowsapartfromShow2reacttosound.

Show2isaslowmovingsinglecolourchangeshowwhichdoesn’treacttosound.

CH1

000-007 Nofunction

008-037 Show1

038-067 Show2

068-097 Show3

098-127 Show4

128-157 Show5

158-187 Show6

188-217 Show7

218-247 Show8

248-255Show0(Randomshow)

7 channel mode:

Channel Value Function

CH1 000-255 Masterdimmer(0-100%)

CH2 000-255 Strobe(slow-fast)

CH3

000-009 Norotation

010-120 Clockwiserotation(fast-slow)

121-134 Norotation

135-245 Counter-clockwiserotation(slow-fast)

246-250 Norotation

251-255 Rotationviasound

CH4 000-255 Red(0-100%)

CH5 000-255 Green(0-100%)

CH6 000-255 Blue(0-100%)

CH7 000-255 White(0-100%)

4 channel mode:

Channel Value Function

CH1

000-016 Red

017-033 Green

034-050 Blue

051-067 White

068-084 Red+Green

085-101 Red+Blue

102-118 Red+White

119-135 Green+Blue

136-152 Green+White

153-169 Blue+White

170-186 Red+Green+Blue

187-203 Red+Green+White

204-220 Red+Blue+White

221-237 Green+Blue+White

238-255 Red+Green+Blue+White

CH2

000-009 Norotation

010-120 Clockwiserotation(fast-slow)

121-134 Norotation

135-245 Counter-clockwiserotation(slow-fast)

246-250 Norotation

251-255 Soundactive

CH3 000-255 Strobe(slow-fast)

CH4000-015 LEDoff

016-255 LEDon

www.prolight.co.uk Shard User Manual 7

Operating instructions

Master/slave mode:

Tosetthemasterunit,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowSLNd ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseNast.Pressthe“ENTER”buttontoconfirmthesetting.Thenselectyourdesiredprogram.Tosettheotherunitsinslavemode,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowSLNdontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseeitherSL 1~SL 2.Pressthe“ENTER”buttontoconfirmthesetting.Theunitwillnowruninsequencewiththemasterunit.

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.

Show mode:

Toaccesstheshowmodes,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowShNdontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetweenSh 0~Sh 8.Pressthe“ENTER”buttontoconfirmthesetting.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Pleasenote:Show0isarandomshowmodewhereitrunsthroughalltheotherbuild-inshows.AllshowsapartfromShow2reacttosound.Show2isaslowmovingcolourchangeshowwhichdoesn’treacttosound.

Sound active:

Toaccessthesoundactivesetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowSoUnontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetweenonorofF.Pressthe“ENTER”buttontoconfirmthesetting.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Sound sensitivity:

Toadjustthesoundsensitivity,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowSensontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetween0~100.Pressthe“ENTER”buttontoconfirmthesetting.Value: 0 - 100 (0 = low, 100 = high)

Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

www.prolight.co.uk Shard User Manual 8

DMX signal lost:

TochangewhattheunitdoeswhentheDMXsignalislost,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowdNStontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetweenNASt(Master/Slave),LAst(HoldthelastDMXcommand)orbLnd(Blackout).Pressthe“ENTER”buttontoconfirmthesetting.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

LED backlight:

ToaccesstheLEDbacklightsetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowLedontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetweenonorofF.Pressthe“ENTER”buttontoconfirmthesetting.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Display invert setting:

Toaccessthedisplayinvertsetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowdIspontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosebetweendISPordSIP.Pressthe“ENTER”buttontoconfirmthesetting.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Fixture test:

Toaccessthefixturetestsetting,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowtestontheLEDdisplay.Nowpressthe“ENTER”button.Theunitwillnowrunthroughitstests(colours,fullonandthenmotorrotation).Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Fixture temperature:

Toaccessthefixturestemperature,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowteNpontheLEDdisplay.Nowpressthe“ENTER”button.Theunitwillnowdisplaythefixturestemperature.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Fixture hours:

Toaccessthefixturesusagetime,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowFh-SontheLEDdisplay.Nowpressthe“ENTER”button.Theunitwillnowdisplaythefixturesusagetime(hours).Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Software version:

Toaccessthefixturessoftwareversion,pressthe“MENU”buttonandusethe“UP”and“DOWN”buttonsontherearoftheunittoshowuerontheLEDdisplay.Nowpressthe“ENTER”button.Theunitwillnowdisplaythefixturessoftwareversion.Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.

Operating instructions

www.prolight.co.uk Shard User Manual 9

CA 8 function:

TheunithasaCA8remotecontrolinputontherear.ThismaybeusedwiththeCA8handcontroller(soldseparately)tocontroltheunit.Pleaseseefunctionsbelow.

Blackout-BypressingtheStandBybuttonthefixturewillblackout.

Mode-Usethisbuttontoputthefixtureintostrobe,autoorshowmodes.

Strobemode(LEDoff)

Automode(LEDon)

Showmodes(LEDflashing)

Function-Onceyouhavechosenthemodeyourequireusethisbuttontosetthestrobeprogram/automodespeedorshowmodes.

Strobemode-1.Synchronousstrobe

2.Twolightstrobe

3.Strobeviasound

Automode-Rotationspeed(1-9)

Showmodes-Shows1-8

Operating instructions

www.prolight.co.uk Shard User Manual 10

Setting the DMX address:

TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachfixturerequiresa“startaddress”from1-512.Afixturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannelindicatedbythestartaddress.Forexample,afixturethatoccupiesoruses7channelsofDMXandwasaddressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthechainstartsat107.

DMX 512:

DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligentfixturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothefixture.DMXdataissentasserialdatathattravelsfromfixturetofixtureviatheDATA“IN”andDATA“OUT”XLRterminalslocatedonallDMXfixtures(mostcontrollersonlyhaveadata“out”terminal).

DMX linking:

DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogetherandoperatefromasinglecontroller,aslongasallfixturesandthecontrollerareDMXcompliant.ToensureproperDMXdatatransmission,whenusingseveralDMXfixturestrytousetheshortestcablepathpossible.TheorderinwhichfixturesareconnectedinaDMXlinedoesnotinfluencetheDMXaddressing.Forexample;afixtureassignedtoaDMXaddressof1maybeplacedanywhereinaDMXline,atthebeginning,attheend,oranywhereinthemiddle.WhenafixtureisassignedaDMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,nomatterwhereitislocatedintheDMXchain.

DATA cable (DMX cable) requirements (for DMX operation):

ThisfixturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,seeimagebelow.

Also remember that DMX cable must be daisy chained and cannot be split.

DMX setup

FurtherDMXcablescanbepurchasedfromallgoodsoundandlightingsuppliersorProLightConceptsdealers.Pleasequote:

CABL10 – 2mCABL11 – 5mCABL12 – 10m

www.prolight.co.uk Shard User Manual 11

Notice:

Besuretofollowthediagramsbelowwhenmakingyourowncables.DonotconnectthecablesshieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRsoutercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.

Special note:

Line termination:

Whenlongerrunsofcableareused,youmayneedtouseaterminatoronthelastunittoavoiderraticbehaviour.

Using a cable terminator will decrease the possibilities of erratic behaviour. (3-pin - Order ref: CABL90, 5-pin - Order ref: CABL89)

5-pin XLR DMX connectors:

Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRfixturesmaybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.

Terminationreducessignaltransmissionproblemsandinterference.itisalwaysadvisabletoconnectaDMXterminal,(resistance120Ohm1/4W)betweenpin2(DMX-)andpin3(DMX+)ofthelastfixture.

5-pin XLR (female)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C

3-pin XLR (female)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)

3-pin XLR (male)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)

5-pin XLR (male)Pin 1: GND (screen)Pin 2: Signal (-)Pin 3: Signal (+)Pin 4: N/CPin 5: N/C

DMX setup

www.prolight.co.uk Shard User Manual 12

WEEE notice

Correct Disposal of this Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedofwithotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtotheenvironmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromothertypesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.

Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheirlocalgovernmentoffice,fordetailsofwhereandhowtheycantakethisitemforenvironmentallysaferecycling.

Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthepurchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.