Embed Size (px)
Citation preview
SHANGHAI XINRAN COMPRESSOR CO.,LTD.
2 4 - h o u r S a f e a n d C o n t i n u o u s D u t y C y c l e
Color card
XR Xin Ran
AIR PACKAGEIntelligent microprocessing controller --A powerful sequence control system
Some problems you can solve perfectly by your own. However, teamwork is always a much
better solution. In order to efficiently use compressors, our professional engieer will assist
you and provide an optimum compressed air package for you.
Xinran piston air compressor
Xinran screw air compressor
Xinran air receiver
Xinran portable air compressor
Xinran filter
Xinran filter
Xinran filter
Xinran filter
Xinran refrigerant air dryer
Xinran dessicant air dryer
Xinran refrigerant air dryer
Xinran refrigerant air dryer
Xinran refrigerant air dryer
Xinran dessicant air dryer
Particle：＜3μ；water：minim；oil：3PPM. Pneumatic device，construction machine，mine jackdrill，blow，cool .
Dew point：-17℃～23℃；Particle：＜1μ；oil：1PPM.Pneumatic tool，valve sandblast，pneumatic stirring, particle products conveying.
Dew point：-17℃～23℃；Particle：＜0.01μ；Oil：0.01PPM.Painting，pneumatic instrument, precise pneumatic element, powder products conveying.
Dew point：-17℃～23℃；Particle：＜0.01μ；oil：0.003PPM.No peculiar smell, medicine packing, cosmetics, synthetic food, can pack
Dew point：＜-40℃；Particle：＜0.01μ；oil：0.01PPM.Electronics, chip make, senior spray painting,film industry, precise instrument, nuclear and air craft industry.
Dew point：＜-70℃；Particle：＜0.01μ；oil：0.003PPM.Food industry, medicine industry, testing instrument in clean room.
Control center Air compressor Air receiver Pre-filter Refrigerant dryer After-filter Desiccant dryer
Air outlet Air inlet
Ambient
Refrigerant dryer
Liquid
Vapor
Vapor liquid
Humid air
Dry air
Oil
Compressed vapor
Air-oil mixture
Intake air
...............................................................................1
................................................................................2
......................................................3
.........................................................................8
............................................................10
.........................................................11
................................................................14
......................................15
...........................................................16
...........................................................18
...................................................19
....................................................................23
.........................................................................24
...............................................................27
.................................................................28
....................................................................29
..........................................................................31
......................................................................................33
..............................................................................36
CATALOGUE
Brief Introduction
Company Culture
Medium/High Pressure Compressor
Piston Air Compressor
Screw Booster Air Compressor
Stationary Screw Air Compressor
VSD Screw Air Compressor
Coal-Mine Explosion Proof Screw Compressor
Oil Free Screw Air Compressor
Portable Screw Air Compressor
Skid Mounted Screw Air Compressor
Down Hole Drilling Rig;
Refrigerant Air Dryer
Heatless Desiccant Air Dryer
Heated Desiccant Air Dryer
High Efficiency Air Filter
Oil/Water Separator
Air Receiver
After Sales Service
Company IntroductionCompany IntroductionCompany Introduction
上海信然压缩机有限公司
耗能低
耗能高
此标识和铭牌同时使用。产品
型号规格和机组输入比功率见
铭牌。
依据国家标准：GB 19153-2009
级
贵单位生产的“ 、 ”牌空气压缩机产品
质量稳定合格，根据我委员会、国家及相关地方政府推荐为：
上海信然压缩机有限公司
信然
The headquarter of Xinran Compressor Co., Ltd. Lies in Shanghai, China which is a leading
supplier of compressor designing, manufacturing and service. Xinran Compressor Company, by
inheriting the advanced designing principle and precise processing technique of American industry,
produces Xinran brand air compressors with mature technique and best quality.
Xinran air compressor has characteristics of little heat, low energy consumption, few faults and
low wearing. With its high-efficient and excellent performance, it has been widely used in electric
power, textile, steel, food, medicine, breathing, diving, firefighting, electronics, machinery, equipment,
automobile, packing, printing, toy, chemical, energy, glass, environmental protection, hardware, PET
bottle blowing, marine and military, etc. Xinran air compressor is popularly sold to Europe, Africa and
Asia, etc.
Our customers are over industries of manufacturing, cultivation and service, etc. Xinran air
compressor, with its perfect quality and first class service, has been highly evaluated by our customers
all over the world.
TRUETRUEWe explore
TTTRRRUUUEEE
Companyculture
We are dedicated to meeting customers’demands.
We are dedicated to human resources’development and cultivation.
We care about our customers’interests and take every effort to
maximize their satisfaction.
We attach great importance to opening up our employees' potential
to the extreme by offering long-term training for improvement of
their skills and qualifications.
Profit is simply a consequence rather than an objective.Pursuit
for profit is not the unique commercial goal,but only one of
considerations.
It is the only way to improve our economic benefit and obtain
more market share by satisfying our customers’demands
to the maximum.
Lowest Trust Revolution Utmost Ecology
Heart to Heart
Xinran PLC intelligent control cabinet
WH-1.0/40-SB
VH-0.7/30
3
W-1.6/10
2-WH-3.0/30
High-efficiency and energy-saving are outstanding features
of Xinran medium pressure air compressor units. Each unit
equips unload start solenoid valve, self-refrigerated drain
valve which make the compressor starting much safer and
running more stable. Advanced control mode can efficiently
control each single compressor unit (support remote control).
Special air-cooling design can reduce the compressor’s
temperature.
Air Compressor for PET Blow Molding
Medium and High Pressure Air Compressor
WWH-1.2/40
4
Oil Free Air Compressor
With the social progress, people prefer healthy
products. The requirement of compressed air
quality becomes more strict, especially for food
and medical industries.
Xinran company produces and develops non-
lub air compressors from 7bar-40bar.
Xinran oil free air compressors achieves "Three No" and "Three Low"
Three No: no oil, no rust, no vibration
Three Low: low speed, low temperature, low noise. are shutdown and protected in case of oil shortage (optional)
Option: Star-delta starter, PIC intelligent control cabinet (electromagnetic starter included)
Option: Suitable air tank.
Xinran oil free air compressors have features:
1. By utilizing differential pressure principle, the compressors achieve non lubrication in the cylinders, which makes the compressed air reach oil free standard.
2. The compressors run stably with no vibration and can achieve no base installation.
3. Reduce the noise ≤75db(A).
4. No oil and rust in the outlet air. Low discharge air temperature.
5. High-efficiency moisture separator is used betwee stage 1 and stage 2 and it will remove 99% liquid water and achieve no wate.
6. The PLC intelligent controlled air compressor units can be selected. It optimizes system operation, ensures availability, and allows customers the flexibility to meet their needs.
7. Air-cooled.
XR 225 E
XR320 E/E1
5
Marine Air Compressor
Breathing air compressor
The XinRan Portable compressors XR225E are compact and extremely easy to operate, the units have established themselves over the
years as reliable compressors. The compressors are ready to run and come with a cable,plug and phase selector switch for easy direction
of rotation control. Ideal for small applications or sporadic filling Operations.
Feature:●Fully wired,Ready to start with cable,plug and phase selector
●1 Filling hose with filling valve and pressure gauge
●Steel frame with carrying handles
●GRP fan belt guard
●2 Oil/Water separators, safety valve for each stage
●Stainless steel cooling pipes and inter-cooler
●Breathing air purification in accordance with EN12021
●Pressure maintaining valve for extended filter duration
Options●additional filling tank
●200/300 bar Exchanging Device
●Auto stop to final pressure
●Auto drain
●Hours counter
●Special Choice to Voltage/Frequency: 400V/60Hz(E);230V/50Hz:;230V/60Hz
●Exchanging Device to Diesel Engine/Electric Motor Driven
Such serials are basic models but customers can choose different configuration so as to meet with different budge or condition.simplly
designment make it be the best choice in the small space like in the ship.
XINRAN XR32ET can supply one air tube proper,and three pipes can be available at most,and also it can be used as one tube with high
pressure when the tube is connected with air control system
Features:●complete line and pipe system,to be ready for use,controlled with delta-starting by timer
●Base is stainless iron,and the fan belt is configured with protection system,
also to be coated with RAL6026
●All pistons are with piston rings
●Three coaxial inlet/outlet valves
●Low-pressure oil pumps and filters
●Oil-water separator is set after stage,and relief valve is
set among stage
●Air for breathing complies with EN 12021 standard
●Pressure maintenance and check valve is available
●One set of air tube and charger valves(there sets
are optional or high-pressure air outlet)
Options:●one more air tube
●Automatic shut-off when no pressure
●Automatic congealed and draining contamination
●Switch of 200barg/300barg
●Protection switch for motor
●Non-standard voltage/frequency
400V/60Hz(E) 230V/50Hz(E) 230V/60Hz(E/E1)
●monitor system for oil pressure is available and it can
automatic shut off when there is no oil
●Oil pressure gauge and stage-gauge is available
●Monitor system for filters is available
VH
-0
.7/3
0-
SB
WH
-1
.0/3
0-
SB
WH
-1
.2/3
0-
SB
WH
-1
.5/3
0-
SB
PW
H-
1.0
/40
-S
B
VH
-0
.65
/35
VH
-0
.7/3
0
WH
-1
.0/3
0
WH
-1
.1/3
5
WH
-1
.2/3
0
WH
-1
.3/3
5
WH
-1
.5/3
0
2-
WH
-2
.0/3
0
2-
WH
-2
.2/3
5
2-
WH
-2
.4/3
0
2-
WH
-2
.6/3
5
2-
WH
-3
.0/3
0
3-
WH
-3
.6/3
0
4-
WH
-5
.0/3
5
4-
WH
-6
.0/3
0
0.7
1.0
1.2
1.5
1.0
0.6
5
0.7
1.0
1.1
1.2
1.3
1.5
2.0
2.2
2.4
2.6
3.0
3.6
5.0
6.0
3.0
3.0
3.0
3.0
4.0
3.5
3.0
3.0
3.5
3.0
3.5
3.0
3.0
3.5
3.0
3.5
3.0
3.0
3.5
3.0
7.5 11
15
18
.5
11 9 7.5 11
11
15
18
.5
18
.5
2×
11
2×
15
2×
15
2×
18
.5
2×
18
.5
3×
15
4×
18
.5
4×
18
.5
68
0
60
0
76
0
79
0
79
0
80
0
68
0
60
0
60
5
76
0
68
0
79
0
60
0
60
5
76
0
70
0
79
0
70
0
68
0
79
0
12
40
×6
30
×7
80
14
70
×7
80
×8
85
14
70
×7
80
×8
85
15
30
×7
65
×1
10
5
14
00
×8
40
×8
40
18
00
×6
30
×1
14
0
18
00
×6
30
×1
14
0
20
05
×7
95
×1
26
0
20
05
×7
95
×1
26
0
20
05
×7
95
×1
26
0
11
40
×7
35
×1
45
0
11
40
×7
35
×1
45
0
20
50
×1
57
0×
98
0
18
80
×1
18
0×
14
40
20
50
×1
57
0×
98
0
18
80
×1
18
0×
14
40
18
80
×1
18
0×
14
40
23
50
×1
57
0×
18
80
25
20
×1
92
0×
15
40
25
20
×1
92
0×
15
40
31
0
43
0
45
0
52
0
47
0
42
0
41
0
53
0
55
0
55
0
52
0
52
0
10
50
10
80
10
80
11
50
11
50
15
80
24
00
24
00
0.6
0.6
5
0.9
0.9
3
0.9
4
1.0
1.0
1.1
1.0
1.7
1.9
1.8
2.0
2.0
2.2
4.0
6.0
6.0
3.5
7.0
10
.5
9.8
5.5
8.0
3.5
4.0
4.0
4.0
7.0
5.5
8.0
3.5
4.0
4.0
11
7.5 15
15
15
15
15
11
11 2 25
2×
15
2×
15
2×
15
2×
11
4×
11
6×
11
55
5
80
0
73
5
90
0
90
0
79
0
80
0
90
0
79
0
73
5
86
0
73
5
79
0
80
0
80
0
79
0
79
0
14
20
×8
30
×8
40
12
50
×7
60
×8
00
14
20
×8
30
×8
40
11
00
×8
15
×1
40
5
11
00
×8
15
×1
40
5
14
20
×8
30
×8
40
14
20
×8
30
×8
40
14
20
×8
30
×8
40
14
20
×8
30
×8
40
11
40
×7
10
×1
50
0
11
40
×7
35
×1
65
0
18
80
×1
43
0×
10
00
18
80
×1
43
0×
10
00
19
50
×1
18
0×
14
40
18
80
×1
43
0×
10
00
20
20
×1
57
0×
20
00
34
95
×1
56
5×
20
00
32
0
47
5
46
7
47
0
47
0
47
0
46
7
47
5
47
5
55
0
55
0
14
80
14
80
14
80
15
00
24
00
36
00
WH
-0
.6/6
0
VH
-0
.65
/35
WH
-0
.9/7
0
WH
-0
.93
/10
5
WH
-0
.94
/98
WH
-1
.0/5
5
WH
-1
.0/8
0
WH
-1
.1/3
5
WH
-1
.0/4
0
WH
-1
.7/4
0
WH
-1
.9/4
0
2-
WH
-1
.8/7
0
2-
WH
-2
.0/5
5
2-
WH
-2
.0/8
0
W-
WH
-2
.2/3
5
4-
WH
-4
.0/4
0
6-
WH
-6
.0/4
0
MO
DE
L3
M/m
inK
Wr.
p.m
mm
kg
Air d
eliv
ery
Mp
a
Dis
cha
rge
pre
ssu
reM
oto
r p
ow
er
Sp
ee
dD
ime
nsio
n(L
XW
XH
) W
eig
ht
ZW
-0
.11
/7
ZW
-0
.15
/7
VW
-0
.3/7
VW
-0
.5/9
VW
-0
.65
/9
VW
-0
.8/9
WW
-1
.05
/9
WW
-1
.25
/9
WW
-1
.45
/9
WW
-1
.65
/9
2V
W-
1.0
0/9
2V
W-
1.3
0/9
2V
W-
1.6
0/9
2-
WW
-2
.0/9
2-
WW
-2
.5/9
2-
WW
-2
.9/9
2-
WW
-3
.3/9
4-
WW
-6
.4/9
0.1
1
0.1
5
0.3
0
0.5
0
0.6
5
0.8
0
1.0
5
1.2
5
1.4
5
1.6
5
1.0
0
1.3
0
1.6
0
2.0
0
2.5
0
2.9
0
3.3
0
6.4
0
0.7
0.7
0.7
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
0.9
1.1
1.5 3 4 5.5
7.5
9.0 11
15
15
2×
4
2×
5.5
2×
7.5
2×
9
2×
11
2×
15
2×
15
4×
15
56
0
75
0
75
0
57
0
79
0
91
0
63
0
70
0
82
0
96
0
57
0
79
0
91
0
63
0
70
0
82
0
96
0
96
0
10
80
×4
35
×1
02
5
10
80
×4
35
×1
02
5
13
40
×5
50
×1
05
0
17
00
×7
00
×1
40
0
17
00
×7
00
×1
40
0
17
00
×7
00
×1
40
0
18
00
×8
60
×1
66
0
18
00
×8
60
×1
66
0
18
00
×8
60
×1
66
0
18
00
×8
60
×1
66
0
20
00
×1
50
0×
15
30
20
00
×1
50
0×
15
30
20
00
×1
50
0×
15
30
20
50
×1
76
0×
17
00
20
50
×1
76
0×
17
00
20
50
×1
76
0×
17
00
20
50
×1
76
0×
17
00
32
00
×2
00
0×
26
00
14
5
15
0
25
0
41
0
42
0
43
0
60
5
62
5
63
5
63
5
84
0
85
0
86
0
11
40
11
55
12
25
12
25
22
00
0.6
1.0
1.2
2.0
2.4
4.0
4.4
3.0
-4
.0
3.0
-4
.0
3.0
-4
.0
3.0
-4
.0
3.0
-4
.0
3.0
-4
.0
3.0
-4
.0
7.5 11
15
2×
11
2×
15
4×
11
4×
15
79
0
62
0
76
0
62
0
76
0
62
0
76
0
12
40
×7
20
×7
90
16
00
×8
30
×1
09
0
16
00
×8
30
×1
09
0
20
00
×1
60
0×
12
70
20
00
×1
60
0×
12
70
20
00
×3
20
0×
12
70
20
00
×3
20
0×
12
70
27
5
46
2
48
0
10
44
10
80
20
88
21
60
WW
H-
0.6
/40
WW
H-
1.0
/40
WW
H-
1.2
/40
2-
WW
H-
2.0
/40
2-
WW
H-
2.4
/40
4-
WW
H-
4.0
/40
4-
WW
H-
4.4
/40
6
Xin
ran
Me
diu
m&
Hig
h P
ress
ure
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Me
diu
m&
Hig
h P
ress
ure
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Me
diu
m&
Hig
h P
ress
ure
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Me
diu
m P
ress
ure
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Me
diu
m P
ress
ure
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Me
diu
m P
ress
ure
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Me
diu
m&
Hig
h P
ress
ure
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Me
diu
m&
Hig
h P
ress
ure
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Me
diu
m&
Hig
h P
ress
ure
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Lo
w P
ress
ure
Oil
Fre
e C
om
pre
sso
r U
nit
s M
ain
Da
taX
inra
n L
ow
Pre
ssu
re O
il F
ree
Co
mp
ress
or
Un
its
Ma
in D
ata
Xin
ran
Lo
w P
ress
ure
Oil
Fre
e C
om
pre
sso
r U
nit
s M
ain
Da
ta
MO
DE
L3
M/m
inK
Wr.
p.m
mm
kg
Air d
eliv
ery
Mp
a
Dis
cha
rge
pre
ssu
reM
oto
r p
ow
er
Sp
ee
dD
ime
nsio
n(L
XW
XH
) W
eig
ht
MO
DE
L3
M/m
inK
Wr.
p.m
mm
kg
Air d
eliv
ery
Mp
a
Dis
cha
rge
pre
ssu
reM
oto
r p
ow
er
Sp
ee
dD
ime
nsio
n(L
XW
XH
) W
eig
ht
MO
DE
L3
M/m
inK
Wr.
p.m
mm
kg
Air d
eliv
ery
Mp
a
Dis
cha
rge
pre
ssu
reM
oto
r p
ow
er
Sp
ee
dD
ime
nsio
n(L
XW
XH
) W
eig
ht
Pro
du
ct im
pro
vem
en
t is
a c
on
tinu
ing
go
al a
t X
inra
n.
De
sig
n a
nd
sp
eci
fica
tion
s a
re s
ub
ject
to c
ha
ng
e w
itho
ut
no
tice
or
ob
liga
tion
.
Re
ma
rks:
Ca
pa
city
te
ste
d a
cco
rdin
g t
o I
SO
21
51：
20
04
ap
pe
nd
ix C
sta
nd
ard
No
ise
leve
l te
ste
d a
cco
rdin
g t
o I
SO
12
17
ap
pe
nd
ix C
19
96（
CA
GI-
pn
eu
rop
PN
2C
PT
2）
XR
-1
00
E
XR
-1
00
E1
XR
-1
00
B
XR
-1
60
E
XR
-1
60
E1
XR
-1
90
B
XR
-2
25
E
XR
-2
45
B
XR
-1
70
E
XR
-2
00
E
XR
-1
70
D/A
L
XR
-2
80
E
XR
-2
80
E1
XR
-2
30
E
XR
-2
80
E
XR
-2
30
ES
XR
-2
80
ES
XR
-3
00
B
XR
-3
00
E
XR
-4
50
E
XR
-3
00
ES
XR
-4
50
ES
XR
-4
50
D(s
tan
da
rd)
XR
-4
50
D
XR
-5
70
E
XR
-5
70
ES
XR
-5
70
E
XR
-7
20
E
XR
-1
30
0E
100/6
/3.5
100/6
/3.5
100/6
/3.5
160/9
.6/5.6
160/9
.6/5.6
190/1
1.4/6.
7
225/1
3.5/7.
9
245/1
4.7/8.
7
170/1
0.2/6.
0
200/1
2.0/7.
0
170/1
0.2/6.
0
280/1
6.8/9.
9
280/1
6.8/9.
9
230/1
3.8/8.
1
280/1
6.8/9.
9
230/1
3.8/8.
1
280/1
6.8/9.
9
300/1
8.0/10
.6
300/1
8.0/10
.6
450/2
7.0/15
.0
300/1
8.0/10
.6
450/2
7.0/15
.9
450/2
7.0/15
.9
450/2
7.0/15
.9
570/3
4.0/20
.1
570/3
4.0/20
.1
570/3
4.0/20
.1
720/4
3.2/25
.4
1300
/78.0/
45.9
33
0
33
0
33
0
33
0
33
0
33
0
33
0
33
0
33
0
33
0
33
0
35
0
35
0
35
0
35
0
35
0
35
0
35
0
35
0
35
0
35
0
35
0
35
0
35
0
42
0
42
0
42
0
42
0
42
0
2.2
/3.0
4.5
/6.0
4.0
/5.5
3.7
/5.0
6.6
/9.0
5.5
/7.5
6.6
/9.0
4.0
/5.5
5.5
/7.5
4.8
/6.5
7.5
/10
.0
7.5
/10
.0
5.5
/7.5
7.5
/10
.0
5.5
/7.5
7.5
/10
.0
8.2
/11
.0
7.5
/10
.0
11
.0/1
5.0
7.5
/10
.0
11
.0/1
5.0
10
.5
14
.3
10
.5/1
4.3
15
.0/2
0.0
15
.0/2
0.0
12
.9/1
7.5
18
.5/2
5.0
37
.0/5
0.0
23
00
23
00
23
00
14
50
14
50
19
00
18
50
20
00
15
30
16
50
15
30
13
00
13
00
10
80
13
00
10
80
13
00
14
00
80
0
11
00
80
0
11
00
11
00
11
00
11
00
11
00
11
00
11
00
98
5
6500
×39
40
6500
×39
00×
4000
7000
×38
00×
4500
7800
×42
00×
5600
7800
×42
00×
5600
9200
×43
00×
5700
7800
×45
00×
5600
9200
×45
00×
5700
1030
0×50
00×
7300
1030
0×50
00×
7300
1030
0×50
00×
7300
1100
0×60
00×
9800
1100
0×60
00×
9800
1100
0×60
00×
9800
1100
0×60
00×
9800
7600
×10
300×
1630
0
7600
×10
300×
1630
0
1290
0×74
00×
6000
1150
0×60
00×
9800
1150
0×60
00×
9800
8100
×11
000×
1680
0
8100
×11
000×
1680
0
1270
0×74
00×
1000
0
1270
0×74
00×
1000
0
1230
0×68
00×
1000
0
8100
×11
000×
1680
0
1450
0×77
00×
1000
0
1650
0×76
00×
1250
0
1590
0×12
100×
1260
0
00×
0043 46 43 90 94 99 92 94 13
5
137
150/
125
195
205
240
240
330
330
180
280
280
390
390
400
430
365
505
520
590
980
MO
DE
LK
W3
m/m
inM
pa
mm
kg
Th
e p
ow
er
of m
oto
rF
ree
air
de
live
ryT
he
ma
xp
ressu
reTh
e dia
met
er o
fou
tlet
Dra
inD
ime
nsio
n(L
XW
XH
) W
eig
ht
26
KW
41
KW
62
KW
99
KW
12
5K
W
18
5K
W
26
0K
W
49
6K
W
32
.0m
33
.2m 3
5m
38
m3
10
m3
15
m3
20
m3
40
m
40
kg
40
kg
40
kg
40
kg
40
kg
40
kg
40
kg
40
kg
1"
1"
1.5
"
1.5
"
2"
2.5
"
2.5
"
5"
1/2
"
1/2
"
1/2
"
1/2
"
1/2
"
1/2
"
1/2
"
1/2
"
16
00
×1
20
0×
13
00
18
00
×1
30
0×
15
00
20
00
×1
50
0×
16
00
29
00
×1
60
0×
17
80
29
00
×1
60
0×
17
80
32
00
×2
40
0×
20
80
40
00
×2
40
0×
20
80
12
00
14
00
18
00
24
00
28
00
38
00
52
00
10
00
0
RC
Z-
02
0A
RC
Z-
03
0A
RC
Z-
05
0A
RC
Z-
07
5A
RC
Z-
10
0A
RC
Z-
15
0A
RC
Z-
20
0W
RC
Z-
40
0W
Re
：A
: a
irco
ole
d
W:
wa
terc
oo
led
MO
DE
L3
M/m
inM
pa
KW
r.p
.mL
mm
kg
Air d
eliv
ery
Dis
cha
rge
pre
ssu
reM
oto
r p
ow
er
Sp
ee
dD
ime
nsio
n(L
XW
XH
) W
eig
ht
V-
0.2
/17
.5
V-
0.2
7/8
.6
V-
0.3
/10
V-
0.4
/17
.5
V-
0.5
/10
V-
0.5
6/1
2
V-
0.7
/12
V-
0.5
/17
.5
V-
1.0
/10
V-
0.6
/10
V-
0.8
/10
V-
1.5
/7
V-
1.3
/10
V-
1.2
/18
W-
1.2
/10
W-
1.6
/10
W-
2.0
/7
W-
2.0
/10
W-
1.8
/12
.5
W-
1.5
/17
.5
W-
2.5
/10
W-
3.0
/7
W-
3.0
/10
W-
2.2
/14
W-
2.6
/14
2-
W4
.0/1
0
2-
W6
.0/1
0
0.2
0.2
7
0.3
0.4
0.5
0.5
6
0.7
0.5
1.0
0.6
0.8
1.5
1.3
1.2
1.2
1.6
2.0
2.0
1.8
1.5
2.5
3.0
2.8
2.2
2.6
4.0
6.0
1.7
5
0.8
6
1.0
1.7
5
1.0
1.2
1.2
1.7
5
1.0
1.0
1.0
0.7
1.4
1.8
1.0
1.0
0.7
1.0
1.2
5
1.7
5
1.0
0.7
1.0
1.4
1.4
1.0
1.0
2.2
2.2
3.0
4.0
4.0
5.5
5.5
5.5
7.5
5.5
7.5 11
11
11
11
15
15
15
15
15
22
22
22
22
25
2×
15
2×
15
80
0
11
30
12
50
83
0
10
40
12
50
75
0
60
0
10
20
71
0
91
0
10
50
10
50
90
0
70
0
95
0
10
00
10
50
95
0
85
0
94
0
10
50
11
00
94
0
10
20
10
50
11
00
15
0
15
0
16
0
16
0
32
0
30
0
44
5
44
5
44
5
44
5
13
60
×5
25
×9
80
13
60
×5
25
×1
03
0
15
00
×6
00
×1
07
0
15
90
×6
80
×1
25
0
17
50
×7
00
×1
31
0
17
70
×7
80
×1
40
0
18
90
×8
50
×1
48
0
18
50
×8
20
×1
56
0
20
50
×1
53
0×
15
00
21
50
×1
40
0×
15
50
22
0
22
3
24
0
24
2
24
5
26
0
29
5
29
5
31
5
36
0
38
0
53
0
53
0
62
0
60
0
62
0
62
0
62
0
70
0
70
0
76
0
76
5
77
5
76
0
77
0
10
60
14
40
7
MO
DE
L3
M/m
inK
Wr.
p.m
mm
kg
Air d
eliv
ery
Pa
Dis
cha
rge
pre
ssu
reM
oto
r p
ow
er
Sp
ee
dD
ime
nsio
n(L
XW
XH
) W
eig
ht
Gas
tank
Xin
ran
Me
diu
m P
res
su
re S
cre
w C
om
pre
ss
or
X
inra
n M
ed
ium
Pre
ss
ure
Sc
rew
Co
mp
res
so
r
Xin
ran
Me
diu
m P
res
su
re S
cre
w C
om
pre
ss
or
Xin
ran
In
du
str
ial
Co
mp
res
so
r M
ain
Da
taX
inra
n I
nd
us
tria
l C
om
pre
ss
or
Ma
in D
ata
Xin
ran
In
du
str
ial
Co
mp
res
so
r M
ain
Da
taX
inra
n H
igh
Pre
ss
ure
Co
mp
res
so
r M
ain
Da
taX
inra
n H
igh
Pre
ss
ure
Co
mp
res
so
r M
ain
Da
taX
inra
n H
igh
Pre
ss
ure
Co
mp
res
so
r M
ain
Da
ta
Pro
du
ct im
pro
vem
en
t is
a c
on
tinu
ing
go
al a
t X
inra
n.
De
sig
n a
nd
sp
eci
fica
tion
s a
re s
ub
ject
to c
ha
ng
e w
itho
ut
no
tice
or
ob
liga
tion
.
Re
ma
rks:
Ca
pa
city
te
ste
d a
cco
rdin
g t
o I
SO
21
51：
20
04
ap
pe
nd
ix C
sta
nd
ard
No
ise
leve
l te
ste
d a
cco
rdin
g t
o I
SO
12
17
ap
pe
nd
ix C
19
96（
CA
GI-
pn
eu
rop
PN
2C
PT
2）
1
2
3
4
5
6
7
8
9
10
11
12
13
0
0
0
0
0
0
0
0
0
0
0
0
0
4
4
4
4
4
4
4
4
4
4
4
4
4
WW-2/40
WW-3/40
WW-4/40
WW-5/40
WW-6/40
WW-8/40
WW-10/40
LG.DW-15/40
LG.DW-20/40
LG.DW-25/40
LG.DW-30/40
LG.DW-40/40
LG.DW-50/40
2
3
4
5
6
8
10
15
20
25
30
40
50
30KW/380V
37KW/380V
55KW/380V
75KW/380V
75KW/380V
110KW/380V
132KW/380V
200KW/380V
280KW/380V
315KW/380V
400KW
500KW
630KW
2000*2300*1750
2500*2300*1750
2500*2400*1850
2500*2400*1850
2500*2400*1850
2800*2400*1850
2800*2400*1850
4500*2400*1850
4500*2400*1850
5500*2400*1850
5500*2400*1850
6200*2400*1850
6200*2500*1850
3000
4000
5000
6000
6000
6500
7000
8000
10000
10000
12000
16000
17000
6KV/10KV
6KV/10KV
6KV/10KV
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Date sheet
VF-1 /60Air Compressor
VF-1 /150Air Compressor
VF-1 /250Air Compressor
VF-1 /350Air Compressor
VF-1.5 /60Air Compressor
VF-1.5 /150Air Compressor
VF-1.5 /250Air Compressor
VF-1.5 /350Air Compressor
VF-2 /60Air Compressor
VF-2 /150Air Compressor
VF-2 /250Air Compressor
VF-2 /350Air Compressor
VF-3 /60Air Compressor
VF-3 /150Air Compressor
VF-3 /250Air Compressor
1
1
1
1
1.5
1.5
1.5
1.5
2
2
2
2
3
3
3
6
15
25
35
6
15
25
35
6
15
25
35
6
15
25
22
22
30
30
30
37
37
37
45
45
55
55
55
55
55
2500*1500*1500
2500*1500*1500
2500*1500*1500
2500*1500*1500
2500*1500*1500
2500*1500*1500
2500*1500*1500
2500*1500*1500
2500*1500*1500
2500*1500*1500
2500*1500*1500
2500*1500*1500
3000*1600*1600
3000*1600*1600
3000*1600*1600
2000
2000
2000
2000
2000
2100
2100
2100
2700
2700
2800
2800
2800
2800
2800
8
Piston Air CompressorAir-cooled Piston Medium&High Pressure Air Compressor
Safe&Reliable:
Stable&High-efficient:
Low discharge temperature:
Complete control system:
Low running cost:
Continuous running, wearing parts 8000hours
Low vibration, double-acting, energy saving
Reasonable designed pressures of each stage
Remote control system, direct technical
support from manufacturer
High reliability, long service cycle, low oil
consumption&low power consumption
No. ModelFAD
3m /min
Inlet pressure
Mpa
Dischargepressure
MpaType&Stage Lubrication Cooling Motor
Dimensions
L*M*H
Weight
kg
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Double V/4
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Oil-injected
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Air-cooled
Piston PET Medium Pressure Oil Free Air Compressor
Date sheet
FAD
adjustRemarksNo. Model
FAD3m /min
Inletpressure
Mpa
Dischargepressure
MpaType&Stage Lubrication Cooling Motor
Dimensions
L*M*H
Weight
kg
W/3
W/3
W/3
W/3
W/3
W/3
W/3
Screw+D/2
Screw+D/2
Screw+D/2
Screw+D/2
Screw+D/2
Screw+D/2
Oil free
Oil free
Oil free
Oil free
Oil free
Oil free
Oil free
Oil free
Oil free
Oil free
Oil free
Oil free
Oil free
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
VSD
VSD
VSD
VSD
VSD
VSD
VSD
No
No
No
No
No
No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
W-1/400
W-1/350
W-1/250
W-1/150
W-1/80
W-1/60
W-1.5.400
W-1.5/350
W-1.5/250
W-1.5/150
W-1.5/80
W-1.5/60
W-2/400
W-2/350
W-2/250
W-2/150
W-2/80
W-2/60
W-2.5/400
W-2.5/350
W-2.5/250
W-2.5/150
W-2.5/80
W-2.5/60
W-3/400
W-3/350
W-3/250
W-3/150
W-3/80
W-3/60
W-5/400
W-5/350
W-5/250
W-5/150
W-5/80
W-5/60
1
1
1
1
1
1
1.5
1.5
1.5
1.5
1.5
1.5
2
2
2
2
2
2
2.5
2.5
2.5
2.5
2.5
2.5
3
3
3
3
3
3
5
5
5
5
5
5
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
40
35
25
15
8
6
40
35
25
15
8
6
40
35
25
15
8
6
40
35
25
15
8
6
40
35
25
15
8
6
40
35
25
15
8
6
37KW/380V
37KW/380V
30KW/380V
22KW/380V
22KW/380V
22KW/380V
30KW/380V
30KW/380V
30KW/380V
30KW/380V
30KW/380V
30KW/380V
45KW/380V
45KW/380V
37KW/380V
37KW/380V
30KW/380V
30KW/380V
55KW/380V
55KW/380V
55KW/380V
55KW/380V
45KW/380V
45KW/380V
75KW/380V
75KW/380V
55KW/380V
55KW/380V
45KW/380V
45KW/380V
110KW/380V
110KW/380V
90KW/380V
90KW/380V
75KW/380V
75KW/380V
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
2000*2300*1750
3000*2450*1850
3000*2450*1850
3000*2450*1850
3000*2450*1850
3000*2450*1850
3000*2450*1850
3000*2450*1850
3000*2450*1850
3000*2450*1850
3000*2450*1850
3000*2450*1850
3000*2450*1850
2100
2100
2000
2000
2000
2000
2000
2000
2000
2000
2000
2000
2100
2100
2100
2100
2000
2000
2300
2300
2300
2300
2500
2500
3500
3500
3500
3500
3500
3500
4200
4200
4200
4200
4200
4200
9
Piston Medium&High Pressure Air Compressor
Data sheet
powerNo. ModelFAD
3m /min
Inlet pressure
Mpa
Dischargepressure
MpaType&Stage Lubrication Cooling
Dimensions
L*M*H
Weight
kg
W/5
W/5
W/5
W/4
W/4
W/4
W/5
W/5
W/5
W/4
W/4
W/4
W/5
W/5
W/5
W/4
W/4
W/4
W/5
W/5
W/5
W/4
W/4
W/4
W/5
W/5
W/5
W/4
W/4
W/4
W/5
W/5
W/5
W/4
W/4
W/4
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Water-cooled
Big capacity Screw booster air compressor
Air capacitym3/min
Inlet airpressure
Mpa
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Data sheet
LG.D-8/100
LG.D-10/100
LG.D-15/100
LG.D-20/100
LG.D-30/100
LG.D-40/100
LG.D-50/100
LG.D-8/150
LG.D-10/150
LG.D-15/150
LG.D-20/150
LG.D-30/150
LG.D-8/250
LG.D-10/250
LG.D-15/250
LG.D-20/250
LG.D-8/350
LG.D-10/350
LG.D-15/350
LG.D-8/400
LG.D-10/400
LG.D-15/400
8
10
15
20
30
40
50
8
10
15
20
30
8
10
15
20
8
10
15
8
10
15
10
10
10
10
10
10
10
15
15
15
15
15
25
25
25
25
35
35
35
40
40
40
132KW/380V
160KW/380V
220KW/380V
315KW/380V
450KW
630KW
710KW
132KW/380V
185KW/380V
250KW/380V
355KW/380V
500KW
160KW/380V
185KW/380V
280KW/380V
400KW
160KW/380V
200KW/380V
280KW/380V
185KW/380V
200KW/380V
315KW/380V
5000*2500*1850
5000*2500*1850
5000*2500*1850
5000*2500*1850
6500*2500*2000
7000*2500*2200
7000*2500*2400
5000*2500*1850
5000*2500*1850
5000*2500*1850
7000*2500*1850
7000*2500*2200
5000*2500*1850
5000*2500*1850
5000*2500*1850
6000*2500*2000
5000*2500*1850
5000*2500*1850
5000*2500*1850
5000*2500*1850
5000*2500*1850
5000*2500*1850
6000
8000
8500
10000
15500
16000
18000
8000
8000
8500
10000
16000
8000
8000
8500
15000
8000
8000
8500
8000
8000
8500
6KV/10KV
6KV/10KV
6KV/10KV
6KV/10KV
6KV/10KV
10
Screw booster air compressor
The reliable oilless and waterless air compressor are very important to PET line.in RSMPS,the booster compress air which
is from screw compressor,the outlet pressure of the RSMPS is 4.0Mpa, its superiority ,simplicity and reliability has resulted
in it being"product of choice" and a leader in all classes it served
The feature of RSMPS as follows:●The RSMPS are advantage in high stability,low noise and beautiful design. The pipe connection system is compact
between booster and screw compressor in order to ensure the high stability and low noise
●The compressor package of the RSMPS include air compressor,air tank and after cooler
With scientific design and rational overall arrangement,it can save space and facilitate installtion for you
●To get the best in reliable,oilless ad waterless compressed air, the RSMPS have featured with equipment to remove oil
content to less 0.001PPM and water to the dew point -23℃
item model Type and stages Lubricated Cooling power measurementL*M*H
Totalweight
kgremark
Outlet airpressure
Mpa
Screw+D type,3 stages
Screw+D type,3 stages
Screw+D type,3 stages
Screw+D type,3 stages
Screw +W type,3 stages
Screw +W type,3 stages
Screw +W type,3 stages
Screw+D type,3 stages
Screw+D type,3 stages
Screw+D type,3 stages
Screw+M type,3 stages
Screw+M type,3 stages
Screw+W type,4stages
Screw+W type,4stages
Screw+W type,4stages
Screw+W type,4stages
Screw+W type,4stages
Screw+W type,4stages
Screw+W type,4stages
Screw+W type,4stages
Screw+W type,4stages
Screw+W type,4stages
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Oil injection
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
Water/water-air
STATIONARY SCREW AIR COMPRESSOR
11
STATIONARY SCREW AIR COMPRESSOR
◆ Noiseproof SystemHigh-density and environment-friendly damping materials are adopted, which makes the noise level reach advanced international standards.
◆ Intelligent ControlLeading time switch and remote automatic control center. All electrical apparatuselements are adopted for Schneider and ABB, etc., which makes you feel stable and prompt.
A. International popular European standard drogue belt pulley, which is easy to install. B. Germany imported OPTI belt which has features of high strength, high drive efficiency and long lifespan.
◆ Drive System
A.Siemens motor, IP54, insulation grade F, SKF high performance bearing which has high efficiency and low temperature rise. B.Check with the unload noise which makes the motor structure more reasonable and good in appearance.IC411 cooling. Both the Installation dimensions and power grades conform to IEC and 42673 standards.C.The full designed service factor offers protection for short-time overload.
◆ Electric Motor
◆ Appearance and StructureA. Nice appearance, excellent Bao Steel cold-rolled plates with 250℃ high temperature baking varnish, which ensures rust proof all the year around.B. Modularized sheet-metal design, which is easy for maintenance and dismounting.C. Reasonable inlet and outlet air passage ensures heat output and noise reduction.
◆ LCD Intelligent Control SystemEnglish LCD Intelligent Control System, which displays all the data and fault reason, and makes users fully understand at one glance.
◆ Intake ValveIntake valve is installed at the inlet to control the air delivery. In normal working, the control signal controls the intake valve open or close to meet the requirement for the air use. When shutdown or air supply is suddenly stopped, the check valve in the intake valve keeps closed to avoid backflow.
◆ Oil Separation SystemVertical horizontal oil separator which has long distance separation. Oil-air mixture is hit, centrifugated and gravityseparated, then passes high efficiency built-in separator, which makes the oil content in the outlet air less than 3PPM.
◆ CoolerA. Plate-fin cooling ensures the compressor no tripping in high ambient temperature by forced exhaust, cooling lubricant and compressor inside temperature.B. Enlarged cooler can guarantee normal working of the compressor set even in conditions of high temperature and dusty. It prolongs cycle of the cooler cleaning and decreases the danger of the lubricant brought by high temperature working.C. Cooler in small compressor sets is designed separately with fan, which contributes to easy cleaning.
◆ Oil FilterFamous brand oil filter which has features of large filtering area and high fineness. It effectively filters the remains of the worn flying parts and the impurities in the oil, which makes lubricants circularly injected into rotor and bearing filtered clean, and guarantees much longer lifespan of the compressor sets.
◆ Air EndA. GHH, ROTORCOMP. SKF bearing and imported oil seal ensures long lifespan.B. Three-coordinates tooth check and strict assembly technology are the main factors ensuring the quality.
XINRAN STATIONARY SCREW AIR COMPRESSOR
◆System Flow
12
◆Features ◆Values
Low noise working Highest reliability
Dual-mode run control Best energy efficiency
Simple fault diagnosis Peak flexibility
Advanced cooling system Maximum capability
Easy maintenance Creative technique
◇ ◇
◇ ◇
◇ ◇
◇ ◇
◇ ◇
◆Cost Performance
◇ Running reliability
◇ Maximum capability
◇ All-weather work
◇ Best compressibility
1.Air inlet filter 8.Moisture trap
2.Air intake valve 9.Air outlet
3.Air end 10.Air intake valve control pipe
4.Oil cylinder 11.Secondary oil return pipe
5.Oil separator 12.Thermal valve
6.Min pressure retaining valve 13.Oil cooler
7.Air cooler 14.Oil filter
Oil-air mixture Watery air
Dry air Lubricant
*Test according to ISO2151;2004 appendix C standard; **Test according to ISO1217 appendix C1996(CAGI-pneurop PN2CPT2) standard
XR5.5A-7XR5.5A-8XR5.5A-10XR5.5A-13XR7.5A-7XR7.5A-8XR7.5A-10XR7.5A-13XR11A-7XR11A-8XR11A-10XR11A-13XR15A-7XR15A-8XR15A-10XR15A-13XR18.5A-7XR18.5A-8XR18.5A-10XR18.5A-13XR22A-7XR22A-8XR22A-10XR22A-13XR30A-7XR30A-8XR30A-10XR30A-13XR37A(W)-7XR37A(W)-8XR37A(W)-10XR37A(W)-13XR45A(W)-7XR45A(W)-8XR45A(W)-10XR45A(W)-13XR55A(W)-7XR55A(W)-8XR55A(W)-10XR55A(W)-13XR75A(W)-7XR75A(W)-8XR75A(W)-10XR75A(W)-13
5.5
5.5
5.5
5.5
7.5
7.5
7.5
7.5
11
11
11
11
15
15
15
15
18.5
18.5
18.5
18.5
22
22
22
22
30
30
30
30
37
37
37
37
45
45
45
45
55
55
55
55
75
75
75
75
7.5
7.5
7.5
7.5
10
10
10
10
15
15
15
15
20
20
20
20
25
25
25
25
30
30
30
30
40
40
40
40
50
50
50
50
60
60
60
60
75
75
75
75
100
100
100
100
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
0.86
0.8
0.66
0.5
1.2
1.1
1.0
0.8
1.7
1.6
1.4
1.1
2.4
2.3
2.2
1.7
3.1
3
2.8
2.3
3.7
3.5
3.0
2.5
5.2
5
4.1
3.7
6.5
6.3
5.8
5.0
8
7.7
7.0
5.8
10.5
9.5
8.5
7.5
13.5
13
11
9.5
180
180
180
180
190
190
190
190
240
240
240
240
250
250
250
250
500
500
500
500
550
550
550
550
750
750
750
750
800
800
800
800
960
960
960
960
1150
1150
1150
1150
1400
1400
1400
1400
65
65
65
65
66
66
66
68
67
67
67
67
68
68
68
68
68
68
68
68
70
70
70
70
71
71
71
71
72
72
72
72
72
72
72
72
73
73
73
73
74
74
74
74
ModelMotor KW
Power HP
Pressure bar
FAD*3M /min
Weight kg
Noise**dB(A)
DimensionL×W×Hmm
Connection:3/4''
1000×600×950
Connection:3/4''
1000×600×950
Connection:1''
1150×700×1180
Connection:1''
1150×700×1180
Connection:1''
1200×800×1380
Connection:1''
1200×800×1380
Connection:11/4''
1420×872×1410
Connection:11/4''
1420×872×1410
Connection:11/2''
1900×1237×1570
Connection:11/2''
1900×1237×1570
1870×1324×1660DN50, PN1.6 flange or2''
XR5.5～75A/W Technical sheet
13
XINRAN STATIONARY SCREW AIR COMPRESSOR
◆System Flow
◆Features ◆Values
Low noise working Highest reliability
Dual-mode run control Best energy efficiency
Simple fault diagnosis Peak flexibility
Advanced cooling system Maximum capability
Easy maintenance Creative technique
◇ ◇
◇ ◇
◇ ◇
◇ ◇
◇ ◇
◆Cost Performance
◇ Running reliability
◇ Maximum capability
◇ All-weather work
◇ Best compressibility
1.Air inlet filter 8.Moisture trap
2.Air intake valve 9.Air outlet
3.Air end 10.Air intake valve control pipe
4.Oil cylinder 11.Secondary oil return pipe
5.Oil separator 12.Thermal valve
6.Min pressure retaining valve 13.Oil cooler
7.Air cooler 14.Oil filter
Oil-air mixture Watery air
Dry air Lubricant
*Test according to ISO2151;2004 appendix C standard; **Test according to ISO1217 appendix C1996(CAGI-pneurop PN2CPT2) standard
90
90
90
90
110
110
110
110
132
132
132
132
160
160
160
160
185
185
185
185
200
200
200
200
220
220
220
220
250
250
250
250
280
280
280
280
315
315
315
315
355
355
355
355
120
120
120
120
150
150
150
150
180
180
180
180
215
215
215
215
250
250
250
250
270
270
270
270
300
300
300
300
340
340
340
340
380
380
380
380
420
420
420
420
480
480
480
480
16.5
16
14
12
20.5
19
17.5
14
25.8
23
20.2
18
28.8
27
23.8
21
32
30
27.5
25
36
34
28
26
40
37
33
28
45
42
38
33
51.3
50.2
43
38
55
50.3
47
41.9
64
58
50
42
75
75
75
75
76
76
76
76
76
76
76
76
77
77
77
77
78
78
78
78
79
79
79
79
80
80
80
80
82
82
82
82
83
83
83
83
84
84
84
84
85
85
85
85
1900
1900
1900
1900
2400
2400
2400
2400
2500
2500
2500
2500
3200
3200
3200
3200
3900
3900
3900
3900
4150
4150
4150
4150
4450
4450
4450
4450
4550
4550
4550
4550
5200
5200
5200
5200
5700
5700
5700
5700
6200
6200
6200
6200
XR90A(W)-7
XR90A(W)-8
XR90A(W)-10
XR90A(W)-13
XR110A(W)-7
XR110A(W)-8
XR110A(W)-10
XR110A(W)-13
XR132A(W)-7
XR132A(W)-8
XR132A(W)-10
XR132A(W)-13
XR160A(W)-7
XR160A(W)-8
XR160A(W)-10
XR160A(W)-13
XR185A(W)-7
XR185A(W)-8
XR185A(W)-10
XR185A(W)-13
XR200A(W)-7
XR200A(W)-8
XR200A(W)-10
XR200A(W)-13
XR220A(W)-7
XR220A(W)-8
XR220A(W)-10
XR220A(W)-13
XR250A(W)-7
XR250A(W)-8
XR250A(W)-10
XR250A(W)-13
XR280W-7
XR280W-8
XR280W-10
XR280W-13
XR315W-7
XR315W-8
XR315W-10
XR315W-13
XR355W-7
XR355W-8
XR355W-10
XR355W-13
XR90～355A/W Technical sheet
1DN65,PN1.6; flange or 2 /2"
2340×1550×1900
1DN65,PN1.6; flange or 2 /2"
2510×1650×1990
DN65,PN1.6; flange or 3
2800×1800×2200
DN65,PN1.6; flange or 3
2800×1800×2200
DN65,PN1.6; flange or 3
2966×2150×2266
DN65,PN1.6; flange or 3
2966×2150×2260
DN65,PN1.6; flange or 4
3190×2000×2150
DN65,PN1.6; flange or 5
3383×1998×2220
DN65,PN1.6; flange or 5
3383×1998×2220
1DN65,PN1.6; flange or 2 /4"
2340×1520×1870
DN50, PN1.6 flange or 2''
2007×1474×1790
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
7
8
10
13
ModelMotor KW
Power HP
Pressure bar
FAD*3
M /min
Weight kg
Noise**dB(A)
DimensionL×W×Hmm
XINRAN VSD SCREW AIR COMPRESSOR
14
VSD SCREW AIR COMPRESSOR
*Test according to ISO2151;2004 appendix C standard; **Test according to ISO1217 appendix C1996(CAGI-pneurop PN2CPT2) standard
◆Features
◇ ◇
◇ ◇
◇ ◇
◇ ◇
◇ ◇
Air pressure stabilization Less physical deterioration
More energy saving Prolonged motor lifespan
Bumpless start Running cost reduction
Low noise Pressure control precision boost
Automatic rest Production capability promotion
Pressure
7.58.510
Coolin
g
Air
Water
Cooling fanPower KW
3Capacity m /minAir loss mmH2Outlet temp ℃
3Cooling water m /minWater pressure BarMax inlet temp ℃Outlet temp ℃Fan power KWTemp rise ℃Pressure drop bar
3m /min*(FAD)
Bar（G）
Model XR37VSD XR55VSD XR160VSDXR75VSD XR90VSD XR110VSD XR132VSD(Min operating pressure 4.5)
1.8~6.41.9~6.11.9~5.8
1.9~7.41.9~7.01.9~6.5
3.7~10.13.9~9.33.9~8.5
3.8~12.93.9~12.14.0~11.5
9.3~17.19.2~15.39.6~14.0
9.0~209.5~19.29.9~17.5
8.9~23.59.3~22.39.9~21.0
9.1~28.09.2~26.0
10.0~25.0
Induction type
3.5184＜6
4.1238
6.3382
＜12
t Ambient+8 （46℃ ambient temp）
2.28（32℃） 13.62（46℃）4.08（32℃） 8.40（46℃） 10（46℃）
2.5-4.546
t Ambient+14 （46℃ ambient temp）
0.3 0.7~10＜1.0
110.4
80.8
ModeNominal power KW
SFEfficiency %
Full load current ADebug range rpm
Voltage&StartInsulationProtection
Ambient temp ℃Altitude mm
Drive Noise dB（A）**Oil content ppm
Lubricant volumeLDimension mm
Weight KgCable input mm
Outlet inch
Motor
Unit
Connection
Size
Water in & out inch
Condensate drain outlet inch
Air-cooledWater-cooled
BSP1 BSP1.5NPT0.38NPT0.38
NPT0.25NPT0.25
Permanent-magnet motor（HPM)
16037 45 55 75 90 110 1321.25
94.4~92.773~73.7
93.7~93.188.4~89.5
95.1~94.7110.3
884~2985
95.5~94.6146
884~3412169~173
845~2197208~211
845~2222
95.9~94.5 97.2~93
247~250845~3000
300~304845~3000
380V/3PH/50Hz soft startF
IP232~46
＜1000Main motor direct coupled
75＜3~5
18 30 91
φ63 φ75BSP1.5 BSP2 BSP2.5
NPT0.38NPT0.38
XR VSD45
1420*872*1410 1900*1237*1570 1900*1237*1570 1870*1324*1660 2007*1474*1790 2340*1520*1870 2340*1550*1900 2510*1650*1900800 980 1200 1500 2000 2500 2700 3400
22/30
37/50
45/60
55/75
90/120
132/175
90/120
3.6
6
7.6
10
16
21
16
0.7
0.7
0.7
0.7
0.7
0.7
0.7
380/660
380/660
380/660
380/660
380/660
380/660
380/660
600/900
600/900
600/900
600/900
600/900
600/900
600/900
2191×960×1330
2730×1040×1478
2730×1040×1478
2800×1140×1456
3200×1216×1605
3600×1300×1830
3200×1216×1605
15
MLGF-3.6/7G-22(KM-30)
MLGF-6/7G-37(KM-50)
MLGF-7.6/7G-45(KM-60)
MLGF-10/7G(KM-75)
MLGF-16/7G-90(KM-120)
MLGF-21/7G-132(KM-175)
MLG-16/7G-90(KM-120)
上 海 信 然 压 缩 机 有 限 公 司
Shanghai Xinran Compressor Co.,Ltd.
Mine explosion-proof air compressorXinran Mine explosion-proof air compressor
MLG(F)37-200kw-----water cooled(air cooled) Mine explosion-proof screw air compressorMLG(F) serial products, air capacity: 6.0~41.5m3/min, air pressure: 0.75~1.25 Mpa(G)
Are safe, reliable, high efficiency, durable and low-noise air compressor in mine occasion.With electrical components meeting explosion
-proof and mine safety certification, strict performance testing, gear drive, long life air end, and ultra coolant. Which has 8000 hours life,
MLG(F)serial products can operate yearly as well as you. Expect, and are widely used in coal and gas outburst place.
ApplicationThe compressor can work safe near the tunneling place underground, and can move forward through the roadway extension, in which
case the high pressure is guaranteed, the working efficiency of pneumatic machine is 30% higher than ground supplying Occasion, power
consumption is lower by 30%, pipes are largely saved. This serial Products are also available in construction tunnel project.
MLG(F)serial products have protection of explosion proof, over load, shot circuit, phase fault and electric leakage; alarm devices of over
temperature, air filter blocked, oil filter blocked, oil Element blocked; protective devices of over temperature shutdown; capacity control,
pressure regulator and safety valve, to prevent over pressure operation. Oil separator element is made by imported ultra-fine fibre glass.
The oil content of compressed air is lower than 3ppm.
Product features and benefits◇Integrated explosion-proof design-all electrical components have explosion
proof certificate and mine safety certificate
◇Excellent XR air end- life time can reach 100000 hours
◇Working environmental temperature is up to 46°C
◇Gear direct connected, back to back tapered roller bearing
◇Little consumption parts, high reliability, simple operation
◇Ultra coolant- life time amounts to 2 years or 8000 hours, Ensure that the air
end never set carbon
◇Multiple choices- The number of models which have explosion proof
certificate and mine safety certificate is the largest in China
New Explosion proof air compressor
2 stages explosion proof air compressor
(energy saving by 15%)
ModelMotor power
(kw/HP)
Capacity3(M /min)
Max. Working
pressure(Mpa)Cooling
method
Voltage
(V)
rail gauge
(mm)Dimension(mm)
Air
Air
Air
Air
Air
Air
Water
XINRAN water lubricated oilless screw air compressor
16
Oil free screw air compressor
From design to manufacturing,it can be shown fully that to achieve energy-saving,cleaness and environment-friendly is
our goal
XINRAN ensures that all XINRAN parts are oil-free design from water lubricated to anti-corrosion,from stainless screws
to silicon carbide bearing and from high-efficiency air filters to fine filter lubricating water.And we believe always that
professional quality cast, quality shape the future
Stainless shape Silicon carbide bearing Stainless compressor rotor XR filters of lubricating water XR air end
XINRAN oil free designmentXINRAN is the true oil free compressor since all processes are lubricated by water from the lubricating of the air ends,
sealing,and cooling
Absolutely oil free volume of compressor can ensure the outlet air is oil free,as well as the stainless air end shape,
stainless rotor,wear-resisting oil less carbon silicon bearing are all designed for life of 25 years
Non-standard orders1.non-standard configuration:different voltage,different color,different explode-proof grade etc
2.Non-standard environment:low temperature,sea water corrosion,tropics,high temperature,dust etc.
3.Non-standard gas:nitrogen compression,booster compression within 50 barg
4.Non-standard pressure:blew 4 barg
XINRAN supplies absolutely oil free air
compressor in 2010 and achieve full success.
At present, there are more than 120 units of
oil free air compressors are applied in fields
of steel,electronic,electric,tobacco,textile,
chemical,food and medicine.And XINRAN
trusts that we can offer more professional
service to customers with secure good quality
and competitive price
With the most secure power
With the most advanced water lubricating
air end
With the most honest concern of caring
for your use
25 years is guaranteed
Oil free is guaranteed
Quality and service is guaranteed
High-efficiency cooler can ensure XINRAN air end
working proper under the temperature of 50℃
High-efficiency motor is for
XINRAN made
XINRAN fine filter for lubricating water can
ensure the best performance of sealing,
lubricating,cooling and noise-reducing
Original air end can ensure
the 25 years of life for air
compressor
Xinran Oil Free Screw Air Compressor
L×W×H
Mpa bar(e) psig I/s 3m /min cfm kw hp dB(A) mm inch kg Ibs
XR/W08
XR/W11
XR/W15
XR/W18
XR/W22
XR/W30
XR/W37
XR/W45
XR/W55
XR/W75
XR/W90
XR/W110
XR/W132
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
0.8
1.0
1.25
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
8
10
12.5
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
116
145
181.25
18.3
17
13.5
25
22
17
40
35.3
26.8
51.7
43.7
35.5
58.3
52.2
43.5
83.3
70
63.5
101.7
87
80.2
121.7
102.2
94.2
160
143.3
123.7
208.3
190.3
163.8
271.7
242
205
323.3
281.7
251.7
366.7
336.3
302
1.1
1.02
0.81
1.5
1.32
1.02
2.40
2.12
1.61
3.10
2.62
2.13
3.50
3.13
2.61
5.00
4.20
3.81
6.10
5.22
4.81
7.30
6.13
5.65
9.60
8.60
7.42
12.50
11.42
9.83
16.30
14.52
12.30
19.40
16.90
15.10
22.00
20.18
18.12
38.84
36.02
28.60
52.97
46.61
36.02
84.75
74.86
56.85
109.46
92.51
75.21
123.59
110.52
92.16
176.55
148.31
134.53
215.40
184.32
169.84
257.77
216.45
199.51
338.98
303.67
262.01
441.38
403.25
347.10
575.56
512.71
434.32
685.03
596.75
533.19
776.84
712.57
639.83
7.5
11
15
18.5
22
30
37
45
55
75
90
110
132
10
15
20
25
30
40
50
60
74
101
121
148
177
58
58
63
65
65
66
67
68
70
73
73
78
78
1000×640×1000
1000×640×1000
1460×850×1400
1460×850×1400
1460×850×1400
1550×930×1620
1550×930×1620
1550×930×1620
2300×1480×1330
2300×1480×1330
2650×1220×1800
2650×1220×1800
2650×1220×1800
39.4×25.2×39.4
39.4×25.2×39.4
57.5×34.7×55.1
57.5×34.7×55.1
57.5×34.7×55.1
61×36.6×63.8
61×36.6×63.8
61×36.6×63.8
90.6×58.3×52.4
90.6×58.3×52.4
104.3×48×70.9
104.3×48×70.9
104.3×48×70.9
500
540
650
840
870
980
1000
1060
1250
1480
2030
2450
2550
1102
1190
1433
1851
1918
2160
2204
2336
2755
3262
4475
5401
5621
17
ModelMax. working pressure FAD*
Motor
power
Noise
level**
DimensionsWeight
*According to ISO1217, Ed3
Annex C-1996
** Noise level according to Pneurop/CagiPN8NTC2
Working conditionAbsolute inlet pressure 1bar(14.5psig)
◇Inlet temperature 20℃(68°F)
◇
Steel Power Textile Drink Electronics Chemical Medicine
XR Xin RanAir Compressor
XR
XINRAN PORTABLE SCREW AIR COMPRESSOR
18
PORTABLE SCREW AIR COMPRESSOR
XR Xin RanAir Compressor
◆Superior environmental adaptation
Cooling case design, adapt high
ambient temperature
◇
◇ Cooling start device (-23℃)
◇ High speed running device (≤60KM/h)
◇ Low noise and environment-friendly
design (≤75dBA)
◇ Latest powder coating
◆Features
◇ Easy operation
◇ Centralized control panel
◇ Automatic emergency protection
◇ Automatic air valve
◇ Oil Level viewing mirror
Airend excess discharge temperature
Compressor air supply overheat
Diesel engine water overheat
Diesel engine oil underpressure
Diesel engine water underlevel
Diesel engine oil underlevel
◇
◇
◇
◇
◇
◇
◆Automatic emergency protection system
RHR750WCU
Meticulous Particulars, Unbeatable PerformancesMeticulous Particulars, Unbeatable PerformancesMeticulous Particulars, Unbeatable Performances
5
1
2
3
4
19
Skid-mounted air compressorSkid-mounted air compressor
Self-designed cooling systemHigh-powered plate-fin coolerObvious cooling performanceMaximum ambient temperature can be 52℃
Inlet air filter systemTwo stages air filter system prevents air compressor From dust and particles. When it’s time to replace filter element, the displayer will remind you.
Safe liftinglugSingle-point lifting and locking protection to avoid unauthorized moving
Ice chest designed outer housingHigh-efficiency cooling blast is formed.Maximum ambient temperature can be 52℃
Air inlet systemNo stage air inlet regulation system can be 0-100% inner regulation.
Safety protectionCompressor discharge temperature high: >120℃Main motor overloadFan motor overloadPower supply phase sequence wrong or open-phaseOil filter blocked alarming
Electric cabinetLarge capacity contactors adaptive to voltage instability outsideWater proof designLarge inner spaceGood heat dispersion of the elements
Power boxWater proof designUnderpart coil in for easy connection and protect the workers.
Repair and maintenaceFront and back gates easy for repair and maintenace.
Standard automatic air discharged louver boards, sound-proof baffle to ensure lowest noise.
Highintensity aluminium ribbed radiater, blow over cooling design.
Standard equipped two heavy duty fuel preliminary devices with water separator.one precise filter to avoid low grade fuel to damage oil-injection system of the engine.
Standard equipped engine crankcase breather with filter device, adsorb harmful gas discharged, protect the invironment and prolong the lifespan of the lubricant and shaft seal. one precise filter to avoid low grade fuel to damage oil-injection system of the engine.
Triplex air intake filteration including centrifugation, high-efficient filtering layer and safe filter element prevents damage of the engine from the severe dust invironment. Meanwhile, separate air intake passage ensures continuous heavy duty running in high temperature.
8
Types for plateau (under 3500m)Types for plateau (under 3500m)Types for plateau (under 3500m)
6
7
9
10
11
12
新
20
13
14
15
16
17
18
19
20
21
22
Skid-mounted air compressor
Three big volume screw lubricated filter element ensures the safe lubrication. Besides traditional thermostatic valve, electronical oil temperature control system OILTRONIX is equipped.
Optional built-in aftercooler and precise filter, adjustable triple valve is intalled to satisfy your requirements of outlet air temperature and quality.
Outlet pressure gauge, fuel tank gauge and English control panel
Best screw airend to meet your requirement for stable and high-efficient air compression.
Stainless steel slide valve is at air outlet. Compared with the traditional ball valve, it is safer, more stable and high-efficient, and adapt to the requirement of large capacity and high pressure.
Timely replaced waste liquor such as screw lubricant, engine oil , engine cooltant and air tank condensed water are integrally drained by external connected pipes are valves which results in environmental protection and easy maintenance.
Pressure regulating valve can adjust to any pressure in the range. Optional double pressure shift system can set two normal working pressures via two pressure regulating valve systems.
Standard equipped electronical pressure adjustable system, during 21-35bar, 33.9-40.4m3/min.
ASME air tank with high-efficient oil separator element ensures the minimum oil remain in the outlet air. The replaced volume of the lubricant is few and reduces cost for the customers.
Heavy duty industrial start battery jar, equipped with protected pedal and electrical switch.
Optional forklit slot at the bottom which is easy for transportation.
975L big volume fuel tanks are equipped both sides to ensure long time full load running. 1550L fuel tank is optional.
High-strength rubber twisted bar shockproof base plate ensures the safe and stable running.
Folding mop, with safety chain and manual brake.
Double-face galvanized cold-rolled plate and drymeal baking varnish painting craft ensure the capability of weather-proof and etch-proof.
Lockable fuel tank lock, safe and easy for adding oil.
Equipped heavy duty industrial engine, 429KW continuous full load A working condition, adapt to the severe environment.
Lockable sound-proof gates are easy for maintenance.
21
R265
WCU
VHR
300W
CU H
R365
WCU
XR3
75W
CU
R425
WCU
VHR
425W
CU H
R500
WCU
R6
50W
CU V
HR60
0WCU
XR7
50W
CU V
HR75
0WCU
HR9
00W
CU R
HR75
0WCU
SHR8
25W
CU
7.5 7 60
4BT3
.9-C
60 2200 24
8.5
13.8
120
6BT5
.9-C
97 2000 24
10.3
10.3
120
6BT5
.9-C
97 2000 24
10.6
8.6
120
6BT5
.9-C
97 2000 24
12 7 120
6BT5
.9-C
97 2000 24
12 13.8
180
6CT8
.3-C
145
1800 24
14 10.3
180
6CT8
.3-C
145
1800 24
18.5 7 180
6CT8
.3-C
145
1800 24
17 13.8
320
6CT8
.3-C
179
1800 24
21.2
8.6
320
6CT8
.3-C
179
1800 24
21.2
13.8
360
6LTA
A8.9-
C
239
1800 24
25.5
10.3
360
6LTA
A8.9-
C
239
1800 24
21.2
20.7
360
6LTA
A8.9-
C
260
1800 24
23.3
17.2
360
6LTA
A8.9-
C
260
1800 24
＜10
1-1"
1-11
/2"1-
1" 1-
11/2"
1-1"
1-11
/2"1-
1" 1-
11/2"
1-1"
1-11
/2"1-
1" 1-
11/2"
1-1"
1-11
/2"1-
11/2"
1-2"
1-11
/2" 1-
2"1-
11/2"
1-2"
1-11
/2" 1-
2"1-
11/2"
1-2"
1-11
/2" 1-
2"1-
11/2"
2X5.
50-8
4X7.
50-1
62X
7.50
-12
3900
1980
1950
2000
3900
1980
1950
2000
3900
1980
1950
2000
3900
1980
1950
2000
4600
2040
1980
3200
4600
2040
1980
3200
4600
2040
1980
3200
5200
1960
2300
3800
5200
1960
2300
3800
5200
2060
2480
5600
5200
2060
2480
5600
5200
2060
2480
5600
5200
2060
2480
5600
2735
1705
1800
1350
XR13
5WCU
XR18
5WCU
3.8 7 25
BT1.
9-C
30 2400 24
5.2 7 40
2BT2
.9-C
48 2500 24
2735
1705
1800
916
2735
1705
1800
966
RHR1
070W
CU
30.0
24.0
480
6LTA
A9.8-
C
348
1800 24
2-21
/2"13
" 15
"
5500
2300
2500
6800
Xin
ran
die
sel
po
rta
ble
dri
ve
n s
cre
w a
ir c
om
pre
sso
r
Sin
gle
sta
ge
co
mp
ress
ion
Tw
o s
tag
es
co
mp
ressio
n
Mod
el
Stag
e
Cap
acity
Wor
king
pre
ssur
e
Fuel
tank
vol
ume
Engi
ne m
odel
Engi
ne p
ower
fuel
coo
ling
met
hod
Rot
atin
g sp
eed
Elec
tric
syst
em v
olta
ge
Oil
rem
ain
Con
nect
ion
qty
Con
nect
ion
size
Tyre
qty
Tyre
spe
cific
atio
n
Leng
th
Wid
th
Hei
ght
Ship
ping
wei
ght
De
sig
ns
an
d s
pe
cif
ica
tio
ns
are
su
bje
ct to
ch
an
ge
wit
ho
ut
no
tic
e o
r o
blig
ati
on
.
Re
ma
rks
: C
ap
ac
ity
tes
ted
ac
co
rdin
g t
o I
SO
21
51：
20
04
ap
pe
nd
ix C
sta
nd
ard
N
ois
e le
ve
l te
ste
d a
cc
ord
ing
to
IS
O1
21
7 a
pp
en
dix
C1
99
6（
CA
GI-
pn
eu
rop
PN
2C
PT
2）
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
Die
sel E
ngin
eW
ater
Coo
led
22
VHR
300E
H
R36
5E
XR37
5E
R42
5E
VHR
750E
XR
950E
VH
R65
0E
XR82
5E
RH
R82
5E
8.5
10.3
10
.6
12
21.5
27
18
.5
23.5
23
.5
14
10.3
8.
6 7
12
8.6
12
8.6
20.7
风冷
1LG0
280-
2AB
1LG0
280-
2AB
1LG0
280-
2AB
1LG0
280-
2AB
1LG0
316-
2AC
1LG0
316-
2AC
1LG0
316-
2AC
1LG0
316-
2AC
1LG0
317-
2AC
75
7575
75
16
0 16
0 16
0 16
0 20
0
1.15
1.
15
1.15
1.
15
1.15
1.
15
1.0
1.0
1.15
2960
29
60
2960
29
60
2960
29
60
2960
29
60
2960
380/
3/50
38
0/3/
50
380/
3/50
38
0/3/
50
380/
3/50
38
0/3/
50
380/
3/50
38
0/3/
50
380/
3/50
＜10
73
73
73
73
82
82
82
82
82
89
1-11
/2" 3-
3/4"
1-11
/2" 3-
3/4"
1-11
/2" 3-
3/4"
1-11
/2" 3-
3/4"
1-2"
1-1
1/2"
1-2
" 1-1
1/2"
1-2
" 1-1
1/2"
1-2
" 1-1
1/2"
1-2
" 1-1
1/2"
2X6.
50-1
2 4X
7.50
-16
3800
1986
1750
1940
3800
1986
1750
1940
3800
1986
1750
1940
3800
1986
1750
1940
4100
1900
1950
4280
4100
1900
1950
4280
4100
1900
1950
4280
4100
1900
1950
4280
4150
2000
2200
5600
XR11
0E
XR18
5E
HR
265E
3.6 8
5.2 7
6.9 7
22 1.15
2960
380/
3/50
30 1.15
2960
380/
3/50
45 1.15
2960
380/
3/50
62
65
68
1LG0
280-
2AB
1LG0
280-
2AB
1LG0
280-
2AB
1-1 1
/2"
1-1 1
/2"
1-1 1
/2"
2980
1700
1600
920
3600
1700
1600
1180
3600
1700
1600
1380
XR10
70E
30.0
24.0
1LG0
319-
2AC
315
1.15
2960
380/
3/50
1-2"
1-1
1/2"
4550
2200
2400
6800
Xin
ran
mo
tor
dri
ve
n p
ort
ab
le s
cre
w a
ir c
om
pre
sso
r
Sin
gle
sta
ge
co
mp
ress
ion
Tw
o s
tag
es
co
mp
ressio
n
Mo
de
l
Sta
ge
2F
ree
air d
eliv
ery
m/m
in
Dis
ch
arg
e p
ressu
re b
ar
Co
olin
g m
eth
od
Mo
tor
mo
de
l
Mo
tor
po
we
r K
W
Se
rvic
e f
acto
r
Mo
tor
sp
ee
d r
pm
Vo
ltag
e V
/Ph
/Hz
Oil
co
nte
nt
pp
m
No
ise
leve
l dB
(A)
Co
nn
ectio
n q
ty.
Tyre
qty
.
Tyre
siz
e
L m
m
W m
m
H m
m
We
igh
t K
g
Co
nn
ectio
n s
ize
De
sig
ns
an
d s
pe
cif
ica
tio
ns
are
su
bje
ct to
ch
an
ge
wit
ho
ut
no
tic
e o
r o
blig
ati
on
.
Re
ma
rks
: C
ap
ac
ity
tes
ted
ac
co
rdin
g t
o I
SO
21
51：
20
04
ap
pe
nd
ix C
sta
nd
ard
N
ois
e le
ve
l te
ste
d a
cc
ord
ing
to
IS
O1
21
7 a
pp
en
dix
C1
99
6（
CA
GI-
pn
eu
rop
PN
2C
PT
2）
23
KC140 KC120 KY140 KY125 KY120 KY100 KY100Jf=6～20
105～140
25
1.0～2.4
≥26
0～72
13.6
76×3000/89×3000
30°
254
3.0
-19°～60°
±45°
-35°～+50°
180°
1200
5850×2270×1550
5000
f=6～20
105～120
25
1.0～1.4
≥21
0～67
13.6
76×3000
30°
254
2.5
-19°～60°
±45°
-35°～+50°
180°
1200
6000×2425×1800
5000
f=6～20
105～140
25
1.0～2.4
≥15
0～63
20
76×3000/89×3000
30°
320
2.0
-15°～50°
±45°
+50°
180°
1200
5850×2250×2020
5500
f=6～20
80～115
25
0.7～1.4
≥13
0～65
17
60×3000/76×3000
30°
290
2.0
-25°～50°
±45°
-45°～100°
-50°～135°
900
4400×2200×2050
3300
f=6～20
80～115
25
0.7～1.4
≥13
0～65
17
76×3000
30°
254
2.0
35～60°
-
-11.5°～36.5°
-118.5°～23.5°
900
5100×2030×2020
3300
f=6～20
80～105
20
0.5～0.7
≥10
0～65
15
60×2000
30°
254
2.0
35～60°
-
-11.5°～+36.5°
-118.5°～23.5°
900
4100×2030×2020
3200
f=6～20
80～105
20
0.5～0.7
≥10
0～65
15
60×2000
30°
254
2.0
-
-
-11.5°～+36.5°
-118.5°～23.5°
900
4100×2030×2020
3100
Xinran Crawler Rig
Crawler Rig
High pressure surface down-the-hole drill rig Medium pressure surface down-the-hole drill rig Low pressure surface down-the-hole drill rig
Xinran surface down-the-hole drill rig series is the latest self-propelled drilling equipment which is popular used in stone pit, railway, road, hydroelectric power, surface mine and construction.Xinran surface down-the-hole drill rig matched with Xinran air compressor and impactor, can drill horizontal, vertical and oblique blasthole, presplittinghole and anchor line hole.
ModelRock hardness
Drilling hole diameter (mm)
Drilling depth (m)
Working pressure (Mpa)
Air consumption (m3/min)
Rotating speed (rpm)
Elevating power (KN)
Drill pipe specifiction(mm)
Grade ability
Ground clearance (mm)
Travel speed (Km/h)
Drill boom lead angle
Drill boom tilt angle
Sliding guide tilt angle
Sliding guide luffing
Sliding guide compensation (mm)
Dimension (mm)
Weight (kg)
Remark air-liquid linkedAir operated Air operated air-liquid linked air-liquid linkedair-liquid linked air-liquid linked
XR-0.7HTF
XR-1HTF
XR-2HTF
XR-3HTF
XR-6HTF
XR-7HTF
XR-10HTF
XR-13HTF
XR-15HTF
XR-20HTF
XR-25HTF
XR-30HTF
XR-40HTF
XR-50HTF
XR-60HTF
XR-80HTF
0.7
45
50
640
430
580
1.2
1
90
ZG1"
60
760
430
700
2.4
150
65
760
430
720
3.8
1.2
2×90
120
1000
600
860
6.5
2
2×150
190
1200
700
1050
7.5
2.6
220/50
10.7
3.6
13.5
3.8
ZG1-1/2"
2×245
ZG2"
260
1400
800
1130
17
3.9
4×180
435
1690
850
1658
23
4.2
480
1795
900
1688
27
5.5
600
1970
900
1708
33
380/50
6.5
4×245
700
1810
1010
1908
2×180+2×245
DN80
45
8.5
DN100
820
2160
1100
2018
55
10.5
6×450
DN125
900
2350
1190
2250
65
13.5
5×550
DN125
1100
2400
1410
2238
85
20
DN125
1220
2200
1550
2600
2×500+3×245 4×550+2×870
24
Refrigerant Air Dryer
Characteristic:
Working Principle
Advanced TechnologyThis product is designed and made by our company based on the America HANKISON mature Technology and Domestic operation
condition,get more efficiency and stably.
Reverse mode to ExchangerLarge air-to-air heat exchangers remove over half of the heat load from the incoming air stream ,minimizing refrigeration system size
and power requirements.
Large surface area permits the compressed air stream to be consistently cooled to dew point.
Gas/Liquid Separated completelyTwo stage Separator removes 99% of condensed moisture.
The compressed air goes into the pre-cooler(18&19) for pre-cooling,then goes into
the heat exchanger(1),exchange the heat with returning compressed air, finally bring
down the temperature of compressed air,and draining out the condensate water. After
that,Compressed air will go into the Evaporator(2), exchange the heat with refrigerant,
then bring down the temperature of compressed air again, get suitable required
temperature dew point
When the Compressed air goes into the pre-cooler (18&19),Heat exchanger(1) and
Evaporator （2)bringing down the temperature step by step, the vapor of the air
coagulates liquid water,and then through gas/liquid separator(3),draining out the liquid
The dried air comes out from gas/liquid separator(3),next, goes through heat
exchanger(1) for other flow. It become calefactive when leaving the dryer, then bringing
down the relative Moisture.
High Efficiency, Energy Saving,Environment Protection,Advanced
High Temperature Air Cooled Type Refrigerant Dryer
Working Condition and Technical dataInlet Temperature: ≤80℃
Cooling Method: Air Cooled Type
Inlet Pressure: 0.6～1.0Mpa
Pressure Exhaust: ≤0.03Mpa
Pressure Dew Point: 3～10℃
Refrigerant: R22
Model/ Size and Technical Data
Items Model
Flow Air Delivery(Nm3/min)
Power Source(V/Hz)
Compressor Power(HP)
Fan Power
Connection Size
Net Weight(kg)
Dim
en
sio
n Length(mm)
Wight(mm)
Height(mm)
25
Refrigerated air dryer,type of high-temperature and water-cooling
Data sheet
XR-15HTW
XR-20HTW
XR-25HTW
XR-30HTW
XR-40HTW
XR-50HTW
XR-60HTW
XR-80HTW
XR-100HTW
XR-120HTW
XR-150HTW
XR-180HTW
XR-200HTW
XR-300HTW
17
3.9
6.0
420
1560
1118
1340
23
4.2
7.5
470
1600
1110
1486
27
5.5
8.8
590
1805
1110
1510
33
6.5
11.8
680
1950
1283
1700
45
8.5
14.8
DN100
785
2250
1285
1683
55
10.5
17.8
870
2130
1350
1708
65
13.5
22.2
DN125
1100
2310
1430
1708
85
20
29.6
ZG2"
1700
2460
1440
1893
100
25
37.0
2480
2860
1620
2000
120
30
44.0
2520
2960
1620
2030
150
37.5
59.0
2800
2960
1620
2050
180
45
66.6
DN200
3050
3000
1810
2210
200
50
74.0
ZG3"
3360
3130
2090
2470
300
80
112.5
DN250
3920
3800
2470
2959
380/50
DN80 DN150
ZG1-1/2" ZG2-1/2"
Refrigerated air dryer,type of normal temperature and air cooling
technical data
XR-15NF
XR-20NF
XR-25NF
XR-30NF
XR-40NF
XR-50NF
XR-60NF
XR-80NF
XR-100NF
17
3.9
2×180
400
1690
750
1527
23
4.2
450
1795
800
1527
27
5.5
2×245
570
1795
800
1527
33
6.5
660
1810
960
1863
45
380/50
8.5
DN100
770
2160
960
1874
65
13.5
3×550
DN125
1050
2450
1250
2300
55
10.5
850
2170
1120
2046
85
20
4×520
1650
2520
1300
2450
100
25
8×195
DN150
2455
2600
1310
2650
3×245
DN80
Condition and technical dataInlet air temperature:
Cooling method: water cooling
intake pressure: 0.6～1.0Mpa
Pressure drop: ≤0.03Mpa
Pressure dew point: 3～10℃
Inlet temperature of cooling water: ≤32℃
Refrigerant: R22
Inlet pressure of cooling water: 0.2～0.4Mpa
≤80℃
Item model
Air capacity 3(Nm /min)
Voltage/frequency(V/Hz)
Power of compressor(HP)
Circulating mass of cooling3water(Nm /h)
Pipe size of air
Pipe size of cooling water
Total weight(kg)
mea
sure
men
t
length
width(mm)
height(mm)
(mm)
Condition and technical dataInlet air temperature:
Cooling method: air cooling
intake pressure: 0.6～1.0Mpa
Pressure drop: ≤0.02Mpa
Pressure dew point: 3～10℃
Refrigerant: R22
≤45℃
Item model
mea
sure
men
t
length
width(mm)
height(mm)
(mm)
Air capacity(Nm3/min)
Voltage/frequency(V/Hz)
Power of compressor(HP)
Power of fan
Pipe size of air
Total weight(kg)
26
XR-15NW
XR-20NW
XR-25NW
XR-30NW
XR-40NW
XR-50NW
XR-60NW
XR-80NW
XR-100NW
XR-120NW
XR-150NW
XR-180NW
XR-200NW
XR-300NW
XR-400NW
XR-500NW
17
3.9
3.0
360
1500
750
1320
23
4.2
3.7
420
1540
760
1360
27
5.5
4.4
550
1795
800
1428
33
6.5
5.9
640
1863
913
1598
45
8.5
7.4
730
2020
950
1598
55
10.5
8.9
830
2170
1120
1758
65
13.5
11.1
1020
2230
1030
1798
85
20
14.5
1600
2460
1160
2019
100
25
18.5
2400
2740
1160
2019
120
30
22.0
2460
2980
1160
2020
150
37.5
29.5
2750
2960
1460
2193
180
45
33.3
3200
3300
1650
2226
200
50
37.0
3250
3550
1725
2380
300
80
55.6
DN250
3900
4000
1980
2580
400
100
74
DN300
4530
4350
2150
2670
500
125
92.5
DN400
5120
4760
2380
2730
380/50
DN80 DN100 DN125 DN150 DN200
ZG1-1/2" ZG2" ZG2-1/2" ZG3" DN100
XR-1MZ
XR-2MZ
XR-3MZ
XR-6MZ
XR-10MZ
XR-12MZ
XR-15MZ
XR-20MZ
XR-25MZ
XR-30MZ
XR-40MZ
XR-50MZ
XR-60MZ
XR-80MZ
XR-100MZ
XR-120MZ
XR-150MZ
XR-200MZ
XR-250MZ
XR-300MZ
1.2
-
ZG1"
980
1030
1240
305
2.4
-
ZG1"
980
1030
1759
450
3.8
-
ZG1"
1100
1065
1607
510
6.5
-
1390
1200
1887
775
10.7
-
ZG2"
1500
1320
2025
1060
13
-
ZG2"
1500
1330
2080
1200
17
3
DN80
1800
1980
2178
1325
23
3.7
DN80
1813
1900
2257
1740
27
4.4
DN80
2085
2045
2474
2050
33
5.9
DN80
2130
2230
2527
2375
DN100 DN125 DN125 DN125 DN150 DN150 DN150 DN200 DN250 DN250
45
7.4
2329
2416
2678
2960
55
8.9
2524
2500
2843
3200
65
11.1
2584
2500
2843
3445
85
14.5
2460
3100
2695
4330
100
18.5
2740
3560
2933
5650
120
22.0
2980
3680
2920
6115
150
29.5
2960
4060
3429
6800
200
37.0
3200
4950
3608
7660
250
46.5
3400
3950
3775
9780
300
55.6
3700
5010
4200
11200
ZG1-1/2"
上 海 信 然 压 缩 机 有 限 公 司Shanghai Xinran Compressor Co.,Ltd.
Normal temperature water cooling refrigerated dryer
Working Condition & technical dataInlet temperature: ≤45℃
Cooling method: water cooling
Pressure drop: ≤0.02Mpa
Dew point: 3～10℃
Cooling waterinlet temperature: ≤32℃
Refrigerant : R22
Cooling water inlet pressure: 0.2～0.4Mpa
Model, size & technical data
Item model
Air capacity 3(Nm /min)
Voltage/frequency(V/Hz)
Power of compressor(HP)
Circulating mass of cooling3water(Nm /h)
Pipe size of air
Pipe size of cooling water
Total weight(kg)
mea
sure
men
t
length
width(mm)
height(mm)
(mm)
Combined low dew point compressed air dryer
Working Condition & technical dataInlet pressure: 0.6～1.0Mpa
Dew point: -40～-70℃
Pressure drop: ≤0.05Mpa
Cooling water temperature: ≤32℃
Air inlet temperature: ≤45℃
Purge air: 3～5%
Model, size & technical data
Item model
mea
sure
men
t
length
width(mm)
height(mm)
(mm)
3Air capacity(Nm /min)
Cooling water circling3
capacity(Nm /h)
Air connection
Weight(kg)
27
Heatless Regenerative Desiccant Air DryerRegenerative Desiccant Dryer --Characteristic
Heatless Regenerative Desiccant Air Dryer
L W H
XR-1WXF
XR-2WXF
XR-3WXF
XR-6WXF
XR-8WXF
XR-10WXF
XR-12WXF
XR-16WXF
XR-20WXF
XR-25WXF
XR-30WXF
XR-40WXF
XR-50WXF
XR-60WXF
XR-80WXF
XR-100WXF
XR-120WXF
XR-150WXF
XR-200WXF
XR-250WXF
XR-300WXF
XR-350WXF
XR-400WXF
XR-500WXF
1.2
2.4
3.8
6.5
8.5
10.7
13
17
23
27
33
45
55
65
85
100
120
150
200
250
300
350
400
500
DN25
DN25
DN25
DN40
DN50
DN50
DN50
DN80
DN80
DN80
DN80
DN100
DN125
DN125
DN125
DN150
DN150
DN200
DN200
DN250
DN250
DN300
DN350
DN350
605
605
605
973
1062
1162
1162
1375
1375
1475
1615
1665
2015
2015
2213
2500
2800
2900
3100
3200
3400
3500
3600
5400
560
560
560
600
700
900
900
1000
1000
1050
1100
1000
1200
1200
1300
1900
2100
2200
2400
2600
2800
2900
3000
3852
1188
1646
1553
1018
1950
1880
2090
1908
2208
2020
2110
2393
2473
2673
2570
2933
3018
3429
3529
3645
3810
3950
4250
4800
102
145
180
322
500
580
650
820
970
1100
1220
1550
1900
2200
2630
3600
4320
5600
7800
9500
11080
13500
15000
19800
This product is completely designed/researched by our company based on America HANKISON and Germany ZANDER
Regenerative Desiccant Air Dryer.
Consistent Outlet Pressure Dew PointsA. Ensures 4.8 second contact time,enough to dry saturated air at the dryer inlet to the desired dew point
B. 30% extra desiccant provided to compensate for natural bed aging ,ensure the best function in the expected life span
C. New flow diffusers ensure even flow distribution through bed ,and eliminate channeling
Minimum Purge Air Use 14%, The lowest in the industryA. Tower design saves 95% of the heat of adsorption,stored heat maintains purge air temperature
During regeneration,proved the absorption of the dryer,and made the purge air more
B. Drying and purging in counter flow arrangement,energy not wasted when wet air travels through dry desiccant
C. Ability to match purge air according to the load
Regenerative Principle
In pressure-swing (Heatless) dryers,desiccant is regenerated by
expanding a portion of the dried air (Called Purge Air ) to atmospheric
pressure and passing in over the off-stream bed. This"wing in pressure"
cause the expanded air to become very dry. The dry purge air pulls
(desorbs) moisture from the desiccant and carries it out of the dryer
Working Condition and Technical DataPurge Capacity:
Working Pressure: 0.6～1.0Mpa3Inlet Oil Content: ≤0.1mg/m
Pressure Dew Point: -20℃～-40℃
Desiccant: Activated alumina+molecular sieve
Working Period: T=4～20 Min
Inlet Temperature: 0℃～45℃
≤12～15%
Model
ItemsCapacity
3(Nm /min)
Connection
Size
Dimension
(mm)Weight
(kg)
Model/Size and Technical Data
L W HModel
ItemsCapacity
3(Nm /min)
Connection
Size
Dimension
(mm)Weight
(kg)
28
Model/Size and Technical Data
3(Nm /min)
L W H
1MXF
2MXF
3MXF
6MXF
8MXF
10MXF
12MXF
16MXF
20MXF
25MXF
30MXF
40MXF
50MXF
60MXF
80MXF
100MXF
120MXF
150MXF
1.2
2.4
3.8
6.5
8.5
10.7
13
17
23
27
33
45
55
65
85
100
120
150
1.2
1.5
2
3.0
3.5
3.9
3.9
5.1
5.4
7
8.2
10
12.5
15
25
40
48
60
DN25
25DN
25DN
40DN
50DN
50DN
50DN
80DN
80DN
80DN
80DN
100DN
125DN
125DN
125DN
150DN
150DN
200DN
605
605
605
973
1062
1162
1162
1375
1375
1375
1375
1665
2015
2015
2213
2500
2800
2900
560
560
560
800
900
900
900
1000
1000
1100
1100
1100
1200
1200
1300
1900
2100
2200
1188
1646
1553
1018
1950
1880
2090
1908
2208
2020
2110
2393
2473
2673
2870
2933
3018
3429
144
182
211
364
560
645
720
930
1120
1240
1370
1700
2100
2450
2800
3950
4685
5900
200MXF
250MXF
300MXF
350MXF
400MXF
500MXF
200
250
300
350
400
500
90
95
114
130
145
175
200DN
250DN
250DN
300DN
350DN
350DN
3100
3200
3400
3500
3600
5400
2400
2600
2800
2900
3000
3852
3529
3645
3810
3950
4250
6990
8200
9980
11650
14180
15750
20800
Heated Desiccant Air DryerHeated Regenerative Desiccant Air Dryer
Externally Heated Purge Desiccant Air Dryer is a new economic product developed by our company. This series product
adds a heater based on the Heatless Desiccant Dryer to heat the purge air. It not only benefits the regeneration effect but
also decrease regeneration purge loss. This series product integrates the advantages of Heated Purge and Heatless Purge
Desiccant Dryer. It efficiently avoids the disadvantages of short switching time and consuming most of the purge air of the
desiccant air dryer and wasting electricity of the heated air dryer. This product has got rationally switch time, little purge air
consumption, also being the most economical Desiccant dryer in this line and widely used in metallurgy ,electric,electron,
foodstuff,chemical industry,petroleum,medicine,light industry,cigarette,apparatus ,auto industry and so on.
Regenerative PrincipleExternally Heated Desiccant Air Dryer is integrated the advantages of PSA(Pressure Swing Adsorption) & TSA(Temperature
Swing Adsorption). Absorbing during normal temperature and dense water vapor; purging during relatively high temperature
and less density of water vapor. That is to say, absorb water of sorbent,purify during the purging period by superior purge
air of thermal diffusion and high pressure difference.
Standard InstrumentationLeft and right tower pressure gauges
Temperature Sensor
Standard Pilot air filter and Regulator
XR series Electronic Control Panel
Working Condition and Technology DataPurge Air:
Working Pressure:0.6～1.0Mpa3Inlet Oil Content:≤0.1mg/m
Pressure Dew Point:-40℃～-70℃
Desiccant :Activated alumina+molecular sieve
Working Period:T=60～180
Inlet Temperature:0℃～45℃
≤3～6%
Model
Items Capacity Heater
(KW)
Connection
Size
Dimension(mm) Weight
(kg)
High-efficiency filterFive filter elements are optional so as to ensure the quality of air system you need
29
Piston-type filter element is
sealed with shell to prevent
unfiltered air from bypassing
filters
Anti-corrosion filter-element
Stainless element has good
structrual performance and
low air-flow resistance
Seam welding technology is
applied to improve strength
New"matrix mixed fiber"media
Enlarged effective area
improved filtering efficiency
to ensure high efficiency
Big open area can reduce
drop of pressure
Filmed and closed foam sleeve
Anti chemical corrision and
anti-oil corrision can be
available
Coalesced liquid can be
prevented from inflowing to
ensure high-efficiency
End cover used to anti chemical
corision was bonded to media
by special glue
Silicon -resin free
Can work proparlly under 66℃
(1)the efficiency of filter is according to ADF
400 of CAGI standard, under 38 of inlet
flow
(2)the efficiency of filter is according to ADF
500 of CAGI standard, under 38 of inlet
flow
Grade 9
Be used to remove much liquid and condensation about 3
microns(5ppm,w/w max remained oil content)
Double-stage filtering
1st stage,two stainless orifice pipes can separate
mechnically at 10 microns
2cd stage,deep media of fiber can remove solid and liquid
particles at 3 microns
Grade 7
Be used to remove liquid water and oil;solid particles at 1 microns
can also be removed(1.0ppm,w/w max remained oil content)
Filter-elements inside and outside can both anti-comesrrosion
Double-stage filtering
1st stage,mixed fiber media and mesh media can remove
most particles
2cd stage,mixed media of multilayer bonded epoxy can
remove oil mist and solid particles
Grade 5Be used to remove water-mist and oil-mist,also solid particlesat 0.01 microns can be removed (0.01ppm w/w max remainedoil content) Filter-elements inside and outside can both anti-comesrrosion Double-stage filtering 1st stage, multilayer media of fiber and mesh can remove most particles,and can pre-remove the air before it run through filtering of 3rd stage 2cd stage,mixed media of multilayer bonded epoxy can remove the smaller condensation Outside filmed and closed foam sleeve
Grade 3Be used to condense the smaller water mist and oil mist,particlesat 0.01microns can be removed too(0.001ppm w/w max remainedoil content) Filter-elements inside and outside can both anti-comesrrosion Double-stage filtering 1st stage,filmed and closed foam sleeve can remove and pre-disperse air-flow 2cd stage,mixed media of multilayer bonded epoxy can remove the smaller condensation Outside filmed and closed foam sleeve
Grade 1Be used to remove oil vapor and hydrocarbon,solid particlesat 0.01 microns can be removed(0.003ppm w/w max remainedoil content) Filter-elements inside and outside can both anti-comesrrosion Double-stage filtering 1st stage,layer of fine active carbon powder can remove most of oil vapor 2cd stage,multilayer fiber media bonded with micro-fine active carbon powder can remove remained oil vapor Multilayer fine midea can prevent pollutant from moving Outside-filmed and closed foam sleeve can prevent pollutant from moving Designed life can be 1000 hours at rated conditions
30
2 3 4 5 6 7 8 9 10 12 14 16 18 20 21
0.38 0.50 0.62 0.75 0.87 1.00 1.12 1.24 1.37 1.62 1.86 2.11 2.36 2.61 2.73
A B C D
*007
*015
*024
*035
*060
*090
*120
*140
*180
*180F
*220F
*360F
*540F
*720F
*900F
*1100F
*1300F
*1450F
*1650F
*1800F
*2000F
0.7
1.5
2.4
3.5
6.0
9
12
14
18
18
22
36
54
72
90
110
130
145
165
180
200
G1/2"
G1/2",G1"
G1-1/2"
G1-1/2"
G1-1/2"
G2"
G2"
G2-1/2"
G2-1/2"
DN80
DN80
DN100
DN100
DN125
DN125
DN125
DN150
DN150
DN150
DN150
DN150
1
1
1
1
1
1
1
1
1
1
1
2
3
4
5
6
7
8
9
10
11
90
90
110
110
110
150
150
150
150
336
336
500
500
600
600
600
700
700
780
780
780
230
230
345
345
474
500
500
650
800
940
940
1050
1050
990
990
1070
1020
1020
1070
1070
1070
255
255
378
378
507
550
550
700
850
1120
1120
1250
1250
1250
1250
1350
1350
1350
1400
1400
1400
133
133
150
150
250
250
350
350
350
450
450
500
500
550
*-001ES
*-001E
*-004E
*-007ES
*-007E
*-013E
*-030E
1
2
4
7
13
13
30
C：3μ
T：1μ
A：0.01μ
A
B
C
D
Date Sheet
ModelCapacity
3Nm /minConnection
Qty. filter
element
Dimensions
Note: 1. Working pressure 0.2-1.0Mpa, pls noted if >1.0Mpa before order
2. Capacity means the max. capacity at working pressure 0.7Mpa
ModelCapacity
3Nm /min
Select Capacity
When the pressure is not 0.7Mpa, if the max. capacity should be selected, we can find the capacity from the above sheet and multiply the related modified
coefficient with min.inlet pressure; it should be selected according to the capacity and running pressure, selected by pipe connected size prohibited
"*"-Precision Grade
Minimum Inlet pressure
Amending modulus
31
L W H
XR-1
XR-3
XR-6
XR-8
XR-10
XR-20
XR-40
XR-50
XR-60
1.2
3.2
6.5
8.4
10.5
21
43
54
65
300
400
490
540
540
750
1000
1000
1300
300
380
490
540
540
500
760
760
800
480
700
950
950
1000
1000
1200
1300
1300
2*1/2"
2*1/2"
2*1/2"
2*1/2"
4*1/2"
4*1/2"
4*1/2"
4*1/2"
4*1"
1/2"
1/2"
1/2"
1/2"
1/2"
1/2"
1"
1"
1"
27
35
47
56
65
75
83
96
118
1/2"
1"
1"
1"
1"
1"
1"
1"
1"
Waste oil water separator
Waste oil collector
Product introduction
Condensate water and oil mixture exists in any compressed air system, the amount of which depends on the capacity,
condition and installation, and can reach from 10L to 10000L per month.
For example, one compressor with air capacity 5Nm3/min, air pressure 0.7Mpa, and 8 hours' working condition, the
condensate can amount to 30.4L per day, under 21°C environmental temperature, 1.03bar atmospheric pressure,
70% relative humidity.
According to environment protection law, oil condensate should be separated from oil water condensate mixture. After
appropriate treatment to meet the requirement of law, water condensate can be discharged into sewage system.
XR series waste oil separator , if installed correctly with proper model, is reliable in eliminating the floating oil condensate
and collecting in the oil collector. After separation, the oil content of water condensate is less than 10ppm, which meet the
emission standard.
National patent protected. Patent number: 200720057811.0
Model, size & Technical data
Item
Model
Capacity
3(Nm /min)
Dimension(mm) Water oil mixtureinlet connection
(ZG)
Oil drain outlet
connection(ZG)
Water drainoutlet connection
(ZG)
Weight
(kg)
Oil water separator
Product introduction
This serial is auxiliary equipment for air compressor, which can eliminate
the dust, water and oil mist in the compressed air.
Working Condition & technical data
Inlet pressure: 0.2～1.0Mpa
Inlet temperature: 5℃～65℃
Filter diameter: 5μm
Water removal rate: ≥99%
Pressure drop: ≤0.005Mpa
Outlet Oil content: ≤1.0ppm
32
A(mm)
B(mm)
C(mm)
H(mm)
H1(mm)
HYF-1 HYF-3 HYF-6 HYF-10 HYF-15 HYF-20 HYF-30 HYF-40 HYF-60 HYF-80 HYF-100 HYF-150 HYF-200 HYF-250 HYF-300
1.2
ZG1"
ZG1/2"
245
133
110
530
/
24
3.8
ZG1"
ZG1/2"
245
133
110
530
/
27
6.5
ZG1-1/2"
ZG1/2"
245
133
175
571
/
48
10.7
ZG2"
ZG1/2"
335
219
210
1035
525
71
15
DN80
ZG1/2"
365
245
230
1139
528
75
20
DN80
ZG1/2"
390
273
240
1139
528
90
30
DN80
ZG1/2"
440
325
253
1180
555
106
40
DN100
ZG1/2"
500
377
290
1230
555
136
60
DN125
ZG1/2"
565
426
310
1250
610
150
80
DN125
ZG1/2"
565
426
310
1250
610
150
100
DN150
ZG1/2"
780
616
410
1550
700
221
150
DN200
ZG1/2"
870
716
480
1850
700
260
200
DN200
ZG1/2"
870
716
480
1850
700
260
250
DN250
ZG1/2"
910
740
500
1900
750
305
300
DN250
ZG1/2"
910
740
500
2210
810
340
A(mm)
B(mm)
H(mm)
HHL-1W HHL-3W HHL-6W HHL-10W HHL-15W HHL-20W HHL-30W HHL-40W HHL-60W HHL-80W HHL-100W HHL-150W HHL-200W HHL-250W HHL-300W
1.2
0.5
ZG1"
ZG1/2"
ZG3/4"
208
108
1303
110
3.8
0.9
ZG1-1/2"
ZG1/2"
ZG1"
259
159
1325
140
6.5
1.8
ZG1-1/2"
ZG1/2"
ZG1-1/2"
295
159
1625
248
10.7
3
ZG2"
ZG1/2"
ZG2"
419
219
1655
380
15
4.5
DN80
ZG1/2"
ZG2"
445
245
1963
380
20
6
DN80
ZG1/2"
ZG2"
473
273
1981
450
30
9
DN80
ZG1/2"
ZG2"
525
325
2007
780
40
12
DN100
ZG1/2"
ZG2"
677
377
2106
880
60
18
DN125
ZG1/2"
ZG2"
677
377
2292
1280
80
24
DN125
ZG1/2"
ZG2-1/2"
677
377
2472
1580
100
30
DN150
ZG1/2"
ZG3"
778
478
2931
1900
150
43
DN150
ZG1/2"
ZG3"
830
529
3014
2150
200
58
DN200
ZG1/2"
ZG3-1/2"
860
564
3025
2530
250
74
DN250
ZG1/2"
ZG3-1/2"
900
630
3045
2920
300
88
DN250
ZG1/2"
ZG4"
900
630
3392
3410
Model, size & technical data
Modelitem
3Air capacity(Nm /min)
Air pipe connection a/b
Drain connection c
Dim
en
sio
n
Dim
en
sio
n
Weight(kg)
Weight(kg)
After cooler
Product introductionThis serial product is auxiliary equipments of air compressor, after which, the high temperature, high pressure compressed air is
cooled. Most of the vapour is condensated and discharged out of the compressor, in order to meet the working conditions of
downstream drying equipments. The medium of water cooling type is water, which will not be influenced by environmental temperature.
With small size, high cooling efficiency, easy maintenance, etc, it can adapt to environment of high temperature, high humidity, high
dust. Air cooling type can adapt to no water or water less environment.
Working conditions & technical dataInlet pressure: 0.4～1.0Mpa
Inlet temperature: ≤140℃
Outlet temperature: ≤45℃
Cooling water inlet temperature: ≤32℃
Cooling water inlet pressure: 0.2～0.4Mpa
air cooling water cooling
Model, size & technical data
Modelitem
3Air capacity(Nm /min)Cooling water circulating
3capacity(m /h)
Air pipe connection
Drain connection
Cooling water connection
Air cooled after cooler is available
33
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
0.3/0.8
0.3/1.0
0.3/1.3
0.3/1.6
0.6/0.8
0.6/1.0
0.6/1.3
0.6/1.6
1.0/0.8
1.0/1.0
1.0/1.3
1.0/1.6
1.5/0.8
1.5/1.0
1.5/1.3
1.5/1.6
2.0/0.8
2.0/1.0
2.0/1.3
2.0/1.6
3.0/0.8
3.0/1.0
3.0/1.3
3.0/1.6
4.0/0.8
4.0/1.0
4.0/1.3
4.0/1.6
5.0/0.8
5.0/1.0
5.0/1.3
5.0/1.6
6.0/0.8
6.0/1.0
6.0/1.3
6.0/1.6
8.0/0.8
8.0/1.0
8.0/1.3
8.0/1.6
110
110
110
110
110
110
110
110
110
110
1594
1594
1598
1598
1905
1907
1909
1907
2365
2367
2371
2367
2562
2564
2562
2566
2782
2786
2788
2786
2944
2946
2946
2980
3036
3040
3036
3040
3726
3730
3726
3730
4346
4350
4346
4350
3704
3706
3740
3744
550
700
800
900
1000
1200
1400
1400
1400
1800
642
642
644
644
680
681
682
681
730
731
733
731
751
752
751
753
761
763
764
763
872
873
873
890
913
915
913
915
913
915
913
915
913
915
913
915
1082
1083
1100
1102
50 50
65 65
65 65
80 80
80 80
100 100
100 100
125
125
150
125
125
150
Rp1-1/2 Rp1-1/2
Rp1-1/2 Rp1-1/2
Rp1-1/2 Rp1-1/2
Rp2" Rp2"
Rp2" Rp2"
1242
1242
1244
1244
1550
1551
1552
1551
1960
1961
1963
1961
2116
2117
2116
2118
2321
2323
2324
2323
2432
2433
2433
2450
2473
2475
2473
2475
3013
3015
3013
3015
3633
3635
3633
3635
2962
2963
2980
2982
400
490
560
630
700
906
1050
1050
1050
1350
20
24
24
24
24
24
24
24
24
32
Rp3/4
Rp3/4
Rp1
Rp1
Rp1-1/4
Rp1-1/2
Rp1-1/2
Rp2
Rp2
Rp2
R1/2
R1/2
R1/2
R1/2
R1/2
R3/4
R3/4
R3/4
R3/4
R1
110
110
2000
2200
150 150
150 150
1500
1650
32
32
Rp2-1/2
Rp2-1/2
R1
R1
10.0/0.8
10.0/1.0
10.0/1.3
10.0/1.6
15.0/0.8
15.0/1.0
15.0/1.3
15.0/1.6
3804
3808
3844
3848
4531
4565
4569
4577
1132
1134
1152
1154
1208
1225
1227
1231
3012
3014
3032
3034
3618
3635
3637
3641
110 2400 200 200 1800 32 Rp3 R1
20.0/0.8
20.0/1.0
20.0/1.3
20.0/1.6
5273
5275
5283
5287
1374
1375
1379
1381
4194
4195
4199
4201
Air tankCarbon steel and low alloy steel tank
H2 DN DN H3 D d
Innerdiameter
φitem
specification
volumet/workingpressure
Designedtemperature
℃
height
H1
Air intake Air outlet
Screw type Screw type
Holder base Relief valve
connector
Drain valve
connector
34
Air receivers with material of Carbon steel and low alloy steel(0.8～1.6Mpa)
H2 DN DN H3 D d
Innerdiameter
φ
49
50
51
52
53
54
55
56
57
58
59
110
110
2400
2500
200 200
200 200
1800
1875
32
36
Rp3
Rp3
R1
R1
110 2500 200 200 1875 36 Rp3 R1
25.0/0.8
25.0/1.0
25.0/1.3
25.0/1.6
30.0/0.8
30.0/1.0
30.0/1.3
30.0/1.6
40.0/0.8
40.0/1.0
40.0/1.3
6173
6175
6183
6187
6735
6739
6743
6747
8915
8919
8923
1374
1375
1379
1381
1400
1402
1404
1406
1400
1402
1404
5094
5095
5099
5101
5630
5632
5634
5636
7440
7442
7444
Air receivers with material of Carbon steel and low alloy steel(2.5～4.0Mpa)
H2 DN DN H3 D d
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
0.3/2.5
0.3/3.0
0.3/4.0
0.6/2.5
0.6/3.0
0.6/4.0
1.0/2.5
1.0/3.0
1.0/4.0
1.5/2.5
1.5/3.0
1.5/4.0
2.0/2.5
2.0/3.0
2.0/4.0
2.5/2.5
2.5/3.0
2.5/4.0
3.0/2.5
3.0/3.0
3.0/4.0
4.0/2.5
4.0/3.0
5.0/2.5
5.0/3.0
6.0/2.5
6.0/3.0
8.0/2.5
8.0/3.0
10.0/2.5
110
110
110
110
110
110
110
110
110
110
110
110
1521
1521
1559
1911
1945
1949
2450
2450
2458
2820
2824
2832
2874
2878
2882
2924
2928
2960
3038
3042
3070
3132
3136
3822
3826
4452
4456
3830
3834
3934
658
658
677
683
700
702
750
750
754
755
757
761
782
784
786
807
809
825
894
896
910
936
938
936
938
956
958
1120
1122
1172
1058
1058
1077
1498
1515
1517
1960
1960
1964
2315
2317
2321
2342
2344
2346
2367
2369
2385
2454
2456
2470
2496
2498
3036
3038
3676
3678
3000
3002
3052
20
24
24
24
24
24
24
24
24
32
32
24
DN25
DN25
DN25
DN25
DN32
DN32
DN40
DN40
DN50
DN50
DN50
DN65
600
700
800
900
1000
1100
1200
1400
1400
1400
1800
2000
50
65
65
80
80
80
100
100
125
125
150
150
50
65
65
80
80
80
100
100
125
125
150
150
420
490
560
630
700
770
906
1050
1050
1050
1350
1500
DN25
DN25
DN25
DN25
DN25
DN25
DN25
DN25
DN25
DN25
DN25
DN25
threaded coupling is available for 0.3m3,0.6m3,1.0m3,1.5m3 and 2.0m3 in above table
itemspecification
volumet/workingpressure
Designedtemperature
℃
height
H1
Air intake Air outlet
Screw type Screw type
Holder base Relief valve
connector
Drain valve
connector
Innerdiameter
φitem
specification
volumet/workingpressure
Designedtemperature
℃
height
H1
Air intake Air outlet Holder base Relief valve
connector
Drain valve
connector
35
H2 DN DN H3 D d
110
110
110
110
110
110
110
110
110
110
110
600
600
850
900
1000
1200
1400
1400
1500
1600
1800
Rp1-1/2 Rp1-1/2
Rp1-1/2 Rp1-1/2
65 65
80 80
80 80
100 100
100 100
100 100
100 100
100 100
150 150
420
420
595
630
700
906
1050
1050
1125
1200
1350
20
20
24
24
24
24
24
24
24
30
30
Rp3/4
Rp3/4
Rp1
Rp1
Rp1-1/4
Rp1-1/2
Rp1-1/2
Rp2
Rp2
Rp2
Rp2-1/2
R1/2
R1/2
R1/2
R1/2
R1/2
R3/4
R3/4
R3/4
43/4
R1
R1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
0.3/0.8
0.3/1.0
0.3/1.3
0.3/1.6
0.6/0.8
0.6/1.0
0.6/1.3
0.6/1.6
1.0/0.8
1.0/1.0
1.0/1.3
1.0/1.6
1.5/0.8
1.5/1.0
1.5/1.3
1.5/1.6
2.0/0.8
2.0/1.0
2.0/1.3
2.0/1.6
3.0/0.8
3.0/1.0
3.0/1.3
3.0/1.6
4.0/0.8
4.0/1.0
4.0/1.3
4.0/1.6
5.0/0.8
5.0/1.0
5.0/1.3
5.0/1.6
6.0/0.8
6.0/1.0
6.0/1.3
6.0/1.6
8.0/0.8
8.0/1.0
8.0/1.3
8.0/1.6
10.0/0.8
10.0/1.0
10.0/1.3
10.0/1.6
1308
1308
1310
1310
2058
2058
2060
2060
2189
2191
2193
2197
2513
2515
2517
2521
2770
2772
2776
2810
2952
2956
2956
2970
3022
3026
3060
3064
3522
3526
3560
3564
4096
4096
4130
4134
4596
4630
4634
4638
4296
4330
4334
4338
504
504
505
505
654
654
655
655
722
723
724
726
734
735
736
738
760
761
763
780
881
883
883
890
911
913
930
932
911
913
930
932
958
958
975
977
1033
1050
1052
1054
1083
1100
1102
1104
954
954
955
955
1654
1654
1655
1655
1722
1723
1724
1726
2084
2085
2086
2088
2310
23111
2313
2330
2381
2383
2383
2390
2411
2413
2430
2432
2911
2913
2930
2932
3358
3358
3375
3377
3433
3450
3452
3454
3483
3500
3502
3504
Stainless Steel Air Receiver (0.8~1.6Mpa)
SN.Size
Volume/ Work Pressure
DesignTemperature
℃
Height
H1
Diameter
φ
Inlet Outlet Supporting Block Safety Valve
Connection
Drain Valve
Connection
36
GLOBAL SALESGLOBAL SALESGLOBAL SALES
XR Xin Ran
XR Xin Ran
上海信然压缩机有限公司Shanghai Xinran Compressor Co.,Ltd
Xinran Genuine Parts
Oil filter Oil separator Electrical system After market service Air filter Coolant
Australlia
South Africa
BrazilPeru
Japan
Shanghai
RussiaUK
FranceGermany
India
UAE
Iran
Saudi Arabia
Chile
USA
Canada
Sweden
Finland
Sudan
Egypt
Thailand
Xinran air compressors are not designed, intended or approved for breathing air applications. Xinran does
not approve specialized equipment for breathing air applications and assumes no responsibility or liability
for compressors used for breathing air service.
Nothing contained on these pages is intended to extend any warranty or representation expressed or
implies, regarding the product described herein. Any such warranties or other terms and conditions of sale of
products shall be in accordance with Xinran's standard terms and conditions of sale for such products, which
are available upon request.
Product improvement is a continuing goal at Xinran. Designs and specifications are subject to change with
notice or obligation.
www.xrcomp.com
