SHAMROCK PRECISION OPERATIONS LLC CATALOG

SHAMROCK PRECISION OPERATIONS LLC CATALOG

LOT QTY DESCRIPTION

2000 1 CUTTING TORCH SET

2001 1 FLAMMABLE LIQUID STORAGE CABINET, EAGLE, 30 gal. cap.

2002 1 DIAMOND LAPPING MACHINE, ACCUFINISH SERIES II, pedestal

mtd.

2003 1 CARBIDE GRINDER, BALDOR MDL. 500, tilting table

2004 1 CARBIDE GRINDER, BALDOR MDL. 500, tilting table

2005 1 PEDESTAL GRINDER, BALDOR, 1/2 HP motor, cast iron pedestal2006 1 ABRASIVE CUT-OFF SAW, KALAMAZOO 8", w/steel table

2007 1 DRILL SHARPENER, DAREX MDL. SP2500, w/steel table

2008 1 STEEL TABLE, w/grinding & shaping wheels

2009 1 LOT CONSISTING OF CARBIDE ENDMILLS, REAMER INDEXERS &

DRILL CHUCKS, assorted

2010 1 LOT CONSISTING OF PRECISION VISE, GAUGE BLOCKS,

MICROMETERS, HEIGHT GAUGE, MAGNETIC DIAL INDICATOR

STANDS, assorted

2011 1 LOT CONSISTING OF WORKBENCH, OILY RAG CONTAINER &

WATER COOLER

2012 1 ROLLING STEEL FOREMAN'S STATION, w/computer

2013 1 VERTICAL BANDSAW, GROB MDL. NS18, w/tilting table

2014 1 VERTICAL BANDSAW, LOCKFORMER DEEP THROAT

2015 1 VERTICAL TURRET MILL, LAGUN MDL. FTV2 CNC, Acu-Rite

Millvision 2-axis programmable control, 10" X 49" table, spds: 60-4200

RPM, right angle milling attach., S/N 46203

2016 1 VERTICAL TURRET MILL, ACER ULTIMA MDL. 3VRH, 10" x 50"

table, hardened & ground ways, 2-axis D.R.O., spds: 60-4200 RPM,

long. pwr. feed, S/N 96070691

2017 1 VERTICAL TURRET MILL, BRIDGEPORT SERIES 1, 9" x 48" table,

pwr. feed, chrome ways, 2-axis D.R.O., spds: 60-4200 RPM, long. pwr.

feed, S/N 284132

2018 1 VERTICAL TURRET MILL, BRIDGEPORT SERIES 1, 9" x 48" table,

pwr. feed, chrome ways, 2-axis D.R.O., spds: 60-4200 RPM, long. pwr.

feed, S/N 207341

2019 1 STEEL CABINET, w/mostly aluminum fixtures

2020 1 LOT OF STEEL WORKTABLES (3), w/fixtures, hold-downs, shop

vacuums & repairable items

2021 1 STEEL PARTS CABINET, w/end mills & assorted tooling

2022 1 LOT CONSISTING OF STEEL WORKBENCH w/contents & STEEL

SHELVING UNIT

2023 1 GAP BED ENGINE LATHE, CHIN HUNG 22" X 120", new 1997, 4-1/2"

spdl. hole, spds: 30-1200 RPM, inch/metric thdng., taper attach., 2-axis

D.R.O., 3-jaw chuck, (3) steadyrests, S/N N.A.

2024 1 GAP BED ENGINE LATHE, SHARP 22" X 80" MDL. 2280X, spds: 15-

1500 RPM, inch/metric thdng., taper attach., steadyrest, 3-jaw chuck,

Newall 2-axis D.R.O., S/N 2907214

2025 1 GAP BED ENGINE LATHE, TARNOW 21" X 80" MDL. TUJ560M,

spds: 20-1600 RPM, inch/metric thdng., taper attach., 2-axis D.R.O.,

3.5" spdl. hole, S/N 4017

Page 1


LOT QTY DESCRIPTION

2026 1 SUPER FINISHING ATTACHMENT, DYNABRADE MDL. 6400, large

qty. of supply tapes & Dynabrade coolant system, S/N 3353, w/supplies

in Kennedy toolbox on rolling steel cart

2027 1 GAP BED ENGINE LATHE, SHARP 18" X 60" MDL. 1860C, spds: 20-

2000 RPM, taper attach., 2-axis D.R.O., steadyrest, S/N 1903134

2028 1 HIGH PRECISION LATHE, HARDINGE 11" X 18" MDL. HLVH, spds:

125-3000 RPM, Newall 2-axis D.R.O., 3-jaw chuck, collets, step

chucks, accessories, S/N HLV-H-14270

2029 1 HIGH PRECISION LATHE, SHARP 11” x 18” MDL. 1118H,

inch/metric thdng., Newall 2-axis D.R.O., collets, step chucks, 1 shot

lube, accessories, digital spd. readout, steadyrest, S/N GCT0910284

2030 1 FREE STANDING JIB CRANE, DAYTON 1/4 T. X 12' REACH, MDL.

4ZW99, 10' under rail, Dayton elec. chain hoist

2031 1 MAPLE TOP WORKBENCH, w/chuck jaws & fixtures

2032 1 MAPLE TOP WORKBENCH

2033 1 STEEL TOP WORKBENCH

2034 1 LOT OF CHIPS & SCRAP ALUMINUM (4 barrels)

2035 1 QUICK CHANGE TOOLPOST, w/assorted toolholders






2041 1 MAPLE TOP WORKBENCH (contents not included - delayed removal)

2042 1 STEEL SHELVING UNIT, w/scrap metal, articulated lights, clamps,

abrasives, etc.

2043 1 LOT OF LATHE CENTERS & DRILL CHUCKS, assorted

2044 1 TAILSTOCK

2045 1 TAILSTOCK

2046 1 TAILSTOCK

2047 1 LATHE CHUCK, 16" dia. 4-jaw



2050 1 LATHE CHUCK, 12 1'2" dia. 4-jaw






2056 1 LOT OF CHUCK JAWS, assorted

2057 1 STEEL WORKBENCH (contents not included - delayed removal)

2058 1 LOT OF COLLETS, steel & brass

2059 2 SETS OF R8 ER COLLET HOLDERS & COLLETS

2060 1 CONSISTING OF BRIDGEPORT 90 DEG. ATTACHMENT, R8

COLLETS & TOOLHOLDERS


2062 1 VERTICAL/HORIZONTAL ROTARY INDEXER, YUASA 8"

2063 1 ROTARY TABLE, YUASA 10"

Page 2


LOT QTY DESCRIPTION

2064 1 MACHINE VISE, KURT 6"

2065 1 MACHINE VISE, 6"



2068 1 VISE, 8"

2069 1 LOT OF V-BLOCKS, assorted (approx. 5)

2070 1 LOT OF ROLLING STEEL SHOP CARTS (2), w/repairable Kurt vises,

assorted


2072 1 AIR TANK, MANCHESTER, 60 gal.

***SALE PROCEEDS TO BUILDING 2***

2073 1 FIBER OPTIC LASER MARKING SYSTEM, ULTRA-DEK BEAMER

MDL. FS22, pwrd. headstock, Dell personal computer & software, fully

enclosed negative pressure cabinet, 2-axis stage, w/steel table

2074 1 PIN DOT MARKING SYSTEM, TELESIS PIN STAMP MDL. TMP1700,

programming, keyboard, fabricated metal stand, w/rolling steel cart

2075 1 PNEUMATIC MARKING SYSTEM, SCHMIDT MDL. 29-096-00, new

2000, 7,000 lb. cap. pressure, 3" stroke, S/N 4-0088

2076 1 ETCHER, ELECTRO ETCH MDL 10A

2077 1 SPRAY BOOTH, approx. 48" x 24" x 48" ht., Airflow Systems dust

collector, rotating spray fixture

2078 1 ARBOR PRESS, NO 2

2079 1 ELECTRIC HEAT TREAT FURNACE, K.H. HUPPERT MDL.

12DFMPC-OT

2080 1 HARDNESS TESTER, WILSON ROCKWELL MDL. 3 JUNIOR,

w/steel table and accessories

2081 1 H-FRAME HYDRAULIC PRESS, DAKE 50 T. CAP. MDL. 50H, adj.

height bed w/elevating mechanism & hand pump, S/N 194140

2082 1 ROLL-AROUND TOOLBOX, KENNEDY, 3-cabinet, w/contents

2083 1 STEEL TABLE

2084 1 STEEL TABLE, w/contents, mist.

2085 1 STEEL TABLE, w/contents of lower shelf consisting of fixtures &

supplies

2086 1 DUST COLLECTOR, AIRFLOW SYSTEMS, flexible arms

2087 1 LOT CONSISTING OF: workbenches (3), file cabinets (2), abrasive

materials, (excludes Airflow system) (contents of room)

2088 1 SELF-CONTAINED VIBRATORY FINISHER, ULTRAMATIC MDL.

UF1, 1 cu. ft., S/N 12425

2089 1 GLOVE BOX BLAST CABINET, ZERO BLAST & PEEN, 18" ht. x

36"W. x 18" dp., recirculating blast media

2090 1 BENCH TOP DRILL PRESS, WT

2091 1 DOUBLE END BENCH TOP GRINDER, BALDOR, 8"

2092 1 LOT CONSISTING OF STEEL TABLES (3), WORKBENCH &

ROLLING CART

2093 1 H-FRAME HYDRAULIC PRESS, PRESSMASTER 250 T. CAP.,

integrated electro-hydraulic dual action pump, 48" dist. btn. uprights,

table raising mechanism, adj. bed, straightening blocks, S/N N.A.

Page 3


LOT QTY DESCRIPTION

2094 1 ROTARY SCREW AIR COMPRESSOR, INGERSOLL RAND MDL.

UP6-7.5-125, new 2006, 28 CFM cap., mtd. to 80 gal. tank, S/N

UP3153U06088

2095 1 ROTARY SCREW AIR COMPRESSOR, KAESER MDL. AIR CENTER

SM10, new 2008, 42 CFM cap., 10 HP drive motor, self-contained,

w/horiz. air receiver, S/N 1300

2096 1 LOT OF OFFICE FURNITURE: desk, file cabinets (3), bookcases (2),

chairs (3), personal computer (contents of office)

2097 1 LOT OF RAW MATERIAL: hardened & ground stock, brass rod,

stainless steel rod, 8145 3-1/2" brass bar, aluminum tubing, aluminum

flats, aluminum extruded angle, 4140 bar, hot roll bar, copper, w/(5)

cantilever racks, packing & safety supplies (located in storage cage)

2098 1 LOT OF LOCKERS, assorted

2099 1 STEEL CABINET, TABLE w/vise & CLEANING SUPPLIES

2100 1 PALLET RACK SECTION, 10' ht. x 8'-6"W. x 42" dp., w/packing

material & aluminum round stock


2102 1 AUTOMATIC HORIZONTAL BANDSAW, SPARTAN MDL. PA10, new

2002, 3 phase, 230 v., 10' infeed conveyor, 1-1/4" blade, S/N

DPA100511

2103 1 LOT OF SCRAP METALS: steel, brass, aluminum, copper, etc.,

assorted

2104 1 PALLET RACK SECTION, 12' ht. x 9'- 4"W. x 42" dp. (contents not

included)

2104A 2 A-FRAME LADDERS, 10' & 12'

2105 1 AIR/HYDRAULIC SHOP HOIST

2106 1 BANDING CART, w/tools

2107 1 FLAMMABLE LIQUID STORAGE CABINET, EAGLE, 45 gal.

2108 1 SCALE, H.D., on rolling cart

2109 1 LOT OF STEEL ROLLING SHOP CARTS (approx.9)

2110 1 COORDINATE MEASURING MACHINE, ZEISS “CONTURA G2”, new

2006, 39.37” x 47.24” x 23.62” measuring range, Zeiss articulating

probe, probe changer rack, Calypso measuring software, 30” Rayco

fixture plate, S/N 200607500353

2111 1 COORDINATE MEASURING MACHINE, ZEISS “DURAMAX

50/50/50”, new 2012, 20” x 20” x 20” measuring range, 220 lb. max.

wt., Calypso scanning software, VAST probe sys., Rayco fixture plate,

S/N 142567

2112 1 SURFACE ROUGHNESS TESTER, MITUTOYO MDL. SV2100, new

2011, integrated computer & printer, S/N 300021011

2113 1 VIDEO MICROSCOPE, STARRETT KINEMIC, S/N KMIC-0181-1861-

0111

2114 1 ULTRALIGHT INDUSTRIAL VIDEO SCOPE, OLYMPUS IPLEX, hard

carrying case, accessories

2115 1 DIGITAL HEIGHT GAUGE, BROWN & SHARPE TESA MDL. MICRO-

HITE 900, Type 007.90023, printer, S/N 1X0030-12

2116 1 ELECTRONIC HEIGHT GAUGE, TESA MICRO-HITE PLUS MDL.

007.30061, S/N 4J-1302-022117 1 ELECTRONIC HEIGHT GAUGE, BROWN & SHARPE TESA MICRO-

HITE MDL. 007.90022, S/N 9D-0019-11

Page 4


LOT QTY DESCRIPTION

2118 1 ELECTRONIC HEIGHT GAUGE, BROWN & SHARPE TESA MICRO-

HITE MDL. 007.90022, S/N 2X-0061-12

2119 1 ELECTRONIC HEIGHT GAUGE, TESA-HITE 400 MDL. 007.30047,

S/N 4M-0017

2120 1 ELECTRONIC HEIGHT GAUGE, TESA MICRO-HITE 1 MDL. 1J-0187,

600mm, S/N 07.60115

2121 1 DIGITAL HEIGHT GAUGE, 24"

2122 1 DIGITAL HEIGHT GAUGE, 18"

2123 1 DIAL INDICATOR HEIGHT GAUGE, 24"

2124 2 HEIGHT GAUGES: 24" & 18"

2125 2 HEIGHT GAUGES, 12" & 10"

2126 2 GAGEMAKER MDL. PD-6000 & ALLEN GAUGE

2127 1 GAGEMAKER MDL. PD-6000

2128 1 MILLER GAUGE CO. MDL 179



2131 1 VERSA GAUGE, MUELLER GAUGE CO.

2132 1 THICKNESS GAUGE, PHASE II UTG-2600

2133 1 HANDY SURFACE INSTRUMENT, ZEISS

2134 2 LEAD GAUGES, GAGEMAKER

2135 1 LOT CONSISTING OF THICKNESS GAUGE, DUROMETER ,

PLANER GAUGE, assorted

2136 1 LOT CONSISTING OF I.D. CALIPERS & DIAL INDICATOR GAUGES,

assorted

2137 1 LOT CONSISTING OF GROOVE MICROMETERS & RADIUS

FEELER GAUGES, assorted

2138 1 MICROMETER HOLDERS, assorted

2139 1 LOT OF SINE PLATES (2), assorted

2140 1 LOT OF V-BLOCKS, assorted

2141 1 LOT CONSISTING OF 1-2-3 BLOCKS & PRECISION VISES (3),

assorted

2142 1 LOT OF MAGNETIC V-BLOCKS, V-BLOCKS & ADJ. BLOCKS,

assorted

2143 1 OPTICAL COMPARATOR, STARRETT 400 SERIES, 16" bench top,

20X lens, Quadra-Chek 200 D.R.O. system, edge finding, rotational

stage

2144 1 FLEXIBLE INSPECTION SCOPE, VOSCOPE VIDEOSTICK

2145 1 FLEXIBLE INSPECTION SCOPE, VOSCOPE VIDEOSTICK, S/N 2144

2146 2 BORESCOPES, SUPER SCOPE PHASE II

2147 1 LOT OF DEPTH GAUGES, assorted (approx. 5)

2148 1 PRECISION LEVEL, STARRETT

2149 1 PRECISION LEVEL, VIS

2150 2 VERNIER CALIPERS: 60" & 40"

2151 1 LOT OF CONSISTING OF 40" VERNIER CALIPER, 24" VERNIER

CALIPER, MITUTOYO 24" DIAL CALIPER

2152 2 VERNIER CALIPERS, 24"

2153 3 VERNIER CALIPERS, 12"

Page 5


LOT QTY DESCRIPTION

2154 3 DIAL CALIPERS, 12"

2155 3 DIAL CALIPERS: 12", 8" & 6"

2156 3 DIGITAL CALIPERS: (1) 8" & (2) 6"

2157 2 GAUGES, STARRETT

2158 1 MICROMETER, GAGEMAKER MDL. PD-8002





2163 1 O.D. MICROMETER SET, 6" to 12"

2164 2 MICROMETERS

2165 1 MICROMETER SET, 0" - 6"



2168 1 MICROMETER, 12" - 16"

2169 1 MICROMETER, 6" - 12"

2170 1 MICROMETER, 6" - 12"

2171 1 LOT OF MICROMETERS, assorted (approx. 7)

2172 1 LOT OF MICROMETERS, assorted (approx. 5)

2173 1 LOT OF BLADE MICROMETERS, assorted (approx. 5)

2174 1 LOT OF BLADE MICROMETERS, assorted (approx. 4)

2175 1 LOT OF BLADE MICROMETERS, assorted (approx.14)

2176 1 THREAD MICROMETERS, assorted (approx. 4)

2177 1 LOT OF MICROMETERS, assorted

2178 1 DIGITAL MICROMETERS, (approx. 4), assorted

2179 1 LOT OF CALIPER MICROMETERS & I.D. INSIDE MICROMETERS,

assorted

2180 1 LOT OF BORE GAUGES, assorted (approx. 4)

2181 1 LOT OF BORE GAUGES, assorted (approx. 3)

2182 1 LOT OF BORE GAUGES, w/accessories, assorted

2183 1 LOT OF BORE GAUGES, w/accessories, assorted

2184 1 LOT OF I.D. MICROMETERS, assorted



2187 1 LOT OF MEASURING RODS, assorted

2188 1 LOT OF PIN GAUGE SETS (6), assorted





2193 1 TOOLING CABINET, LISTA, 9-drawer



2196 1 PRECISION GRANITE TABLE: PRECISION GRANITE, 48" x 72" x 8"

thk., Grade A, on granite stand


thk., Grade B, on fabricated stand

Page 6


LOT QTY DESCRIPTION


thk., Grade B, on fabricated stand

2199 1 GRANITE SURFACE PLATE, 36" x 24" x 3 1/2", w/metal stand

2200 1 GRANITE SURFACE PLATE, 24" x 18" x 3", on rolling metal stand

2201 1 GRANITE SURFACE PLATE, 36" x 24" x 4", w/steel stand

2202 1 PIN GAUGE SET, GAGEMAKER

2203 1 LOT OF BLOCK GAUGES, assorted


2205 1 LOT CONSISTING OF DESK w/contents & PERSONAL COMPUTER

2206 1 FOREMAN'S STATION, w/computer

2207 1 STEEL TABLE, 4' x 8', w/levelers (contents not included - delayed

removal)


removal)


removal)


removal)


removal)

2212 1 COPIER, CANNON IMAGE RUNNER 33201

2213 1 LOT OF PHONE HANDSETS, w/communication cable, assorted

(approx. 19)

2214 1 PRINTER, ZEBRA ZM400

2215 1 PRINTER, ZEBRA ZM400

2216 1 LOT REMAINING CONTENTS OF SHIPPING ROOM: 4' x 8' steel

table, steel shelving units, packing supplies, assorted

2218 1 LOT OF CONTENTS OF OFFICE: desk, credenza, chairs (2), file

cabinets, printer, shredder, personal computer, assorted

2219 1 LOT OF CONTENTS OF OFFICE: desk, table, chair, printer, personal

computer, assorted

2220 1 LOT OF CONTENTS OF BREAKROOM: refrigerator, microwave,

water cooler, (nothing attached to walls included)


2221 1 CNC MILL/TURN MACHINE, OKUMA “SPACETURN LB3000EX-MY”

4-AXIS, new 6/2012, Okuma OSP-P200LA CNC control, 22.8" sw. over

bed, 18.5" sw. over carriage, 13.39" max. turning dia., 38.19" dist. btn.

centers, +2.76"/-1.97" Y-axis travel, .001 deg. C-axis, 3.58" spdl. hole,

spds: 42-4200 RPM, 40/30 HP spdl. drive motor, rotary tool spds: 45-

6000 RPM, live tooling, tool presetter, 10" chuck, tailstock, S/N 163860

(mist collector not included)

2222 1 CNC MILL/TURN MACHINE, OKUMA “SPACETURN LB3000EX-MY”

4-AXIS, new 6/2012, Okuma OSP-P200LA CNC control, 22.8" sw. over

bed, 18.5" sw. over carriage, 13.39" max. turning dia., 38.19" dist. btn.

centers, +2.76"/-1.97" Y-axis travel, .001 deg. C-axis, 3.58" spdl. hole,

spds: 42-4200 RPM, 40/30 HP spdl. drive motor, rotary tool spds: 45-

6000 RPM, live tooling, tool presetter, 10" chuck, tailstock, S/N 164293

(mist collector not included)

Page 7


LOT QTY DESCRIPTION

2223 1 RIGHT ANGLE MILLING ATTACHMENT



2226 1 MILLING ATTACHMENT

2227 1 MILLING ATTACHMENT

2228 1 CNC LATHE, OKUMA SPACETURN MDL. LB3000EX, new 8/2012,

Okuma OSP-200LA CNC control, 22.8" sw. over bed, 18.5" sw. over

carriage, 13.39" max. turning dia., 38.19" dist. btn. centers, 3.58" spdl.

hole, spds: 42-4200 RPM, 40/30 HP 10" chuck, 12 sta. turret, tool

presetter, tailstock, chip conveyor, S/N 165470 (mist collector not

included)

2229 1 CNC LATHE, DOOSAN “PUMA 400C”, new 1/2009, Fanuc 21i-TB

CNC control, 27.5” sw. over bed, 21.65" max. turning dia., 44.1" max.

work length, 6.5” bap cap., spds: 15-1500 RPM, 30 HP, Samchully Mdl.

MH-221 21" hyd. chuck, SMW Autoblock SLU-4-ZS hyd. steadyrest, 12-

sta. turret, tailstock, chip conveyor, S/N PM353998 (mist collector not

included)

2230 1 CNC LATHE, DOOSAN “PUMA 280”, new 2009, Fanuc 21i-T CNC

control, 23” sw. over bed, 15.7” turning dia., 26.3” btn. centers, 3.38”

spdl. bore, 2,800 RPM, 30 HP, 12 sta. turret, 10" chuck, presetter,

tailstock, chip conveyor, S/N PM2801249 (mist collector not included)

2231 1 CNC LATHE, DAEWOO PUMA MDL. 230C, new 2002, Fanuc 21i-T

CNC control, 21” sw. over bed, 13” sw. over carriage, 26.3” btn.

centers, 3.54” spdl. bore, 3,500 RPM, 25 HP, 12 sta. turret, 10" chuck,

presetter, tailstock, chip conveyor, S/N PM232385 (mist collector not

included)2232 1 CNC LATHE, OKUMA “CAPTAIN L-370-BB”, new 2001, Okuma OSP-

E100L CNC control, 20.08” sw. over bed, 14.56” turning dia., 21” btn.

centers, 3.15” spdl. bore, 3,800 RPM, 8" 3-jaw thru hole chuck, tool

presetter, tailstock, 12 sta. turret, chip conveyor, S/N 0008 (mist

collector not included)

2233 1 CNC LATHE, DOOSAN LYNX MDL. 220A, new 8/2005, Fanuc 21i

CNC control, 20.1” sw. over bed, 6.7” turning dia., 12.6” turning length,

2.4” spdl. bore, 6000 RPM, 20 HP, 12 sta. turret, 6" chuck, presetter,

tailstock, parts catcher, chip conveyor, S/N L2200559 (mist collector not

included)

2234 1 CNC LATHE, DOOSAN LYNX MDL. 220LC, new 2006, Fanuc 21i

CNC control, 20.1” sw. over bed, 12.6” turning dia., 21” turning length,

3” spdl. bore, 4,000 RPM, 20 HP, 12 sta. turret, 8" chuck, presetter,

tailstock, parts catcher, chip conveyor, S/N L2201057 (mist collector

not included)




tailstock, parts catcher, chip conveyor, S/N L2201386 (mist collector

not included)




tailstock, parts catcher, chip conveyor, S/N L2201747 (mist collector not

included)

Page 8


LOT QTY DESCRIPTION

2237 1 CNC LATHE, OKUMA “CAPTAIN L470”, new 2002, Okuma OSP-

E100L CNC control, 24.41” sw. over bed, 18.9” sw. over crosslide,

16.54” turning dia., 50” btn. centers, 4.33” spdl. bore, 3000 RPM, 30

HP, 12-sta. turret, 15" chuck, tool presetter, tailstock, chip conveyor,

S/N 102085 (mist collector not included)

2238 1 CNC LATHE, OKUMA “CROWN L-1420”, new 2002, Okuma OSP-

U10L CNC control, 18.9” sw. over saddle, 14.17” turning dia., 50" btn.

centers, 3.15” spdl. bore, 3,500 RPM, 25 HP, 15" thru hole hyd. chuck,

12-sta. turret, chip conveyor, roller steadyrest, S/N 0158 (mist collector

not included)

2238A 1 STEADYREST

2239 1 MIST COLLECTOR, AIRFLOW SYSTEMS MDL. MPH8V2-PG6-DL-

EXHE-LH, 1 HP


EXHE-LH, 1 HP


EXHE-LH, 1 HP


EXHE-LH, 1 HP

2243 1 MIST COLLECTOR, AIRFLOW SYSTEMS MDL. MPH5-PG6, 1/2 HP,

hanging


hanging


hanging


hanging


hanging


hanging


hanging

2250 1 MIST COLLECTOR, AIRFLOW SYSTEMS MDL. MPD4BI-PG6-DL-

EXDOP-PLNM, 3/4 HP

2251 1 MIST COLLECTOR, AIRFLOW SYSTEMS MDL. MPD4BI-PG6-DL-

EXDOP-PLNM, 3/4 HP

2252 1 LOT OF CONTENTS OF OFFICE: desk, (6) chairs, bookcase file

cabinet, printer, personal computer


2254 1 LOT CONSISTING OF SCRAP CHIPS, assorted (in approx. 17 barrels)

2255 1 FREE STANDING JIB CRANE, DAYTON 1/4 T. X 12' REACH, MDL.

4ZW99, 10' under rail, Dayton elec. chain hoist

2256 1 FREE STANDING JIB CRANE, ABELL-HOWE 1 T. X 13' REACH,

approx. 10' under rail, Dayton 1 T. cap. elec. chain hoist

2257 1 LOT OF STEEL SHELVING UNITS (4), w/contents & assorted shop

stools

Page 9


LOT QTY DESCRIPTION

2258 1 OPTICAL COMPARATOR, SCHERR-TUMICO OPTICAL MDL. 20-

3500


2260 1 4-AXIS CNC VERTICAL MACHINING CENTER, DOOSAN “MYNX

6030/50”, new 6/2008, 60” X, 30” Y & 24.6” Z-axis travels, CAT-50

taper, 63” x 29.5” table, 3300 lb. table load, 6,000 RPM, 20 HP, 30 pos.

ATC, Nikken RT300B CNC rotary table w/5-1/2" thru hole & tailstock,

Adjust-Tru 6-jaw chuck, HP thru-spdl. coolant system, chip conveyor,

S/N MYNX750320

2261 1 4-AXIS CNC VERTICAL MACHINING CENTER, DOOSAN MDL.

MV5025-50, new 7/2007, Fanuc 21iMB CNC control, 55.1” x 27.6” tbl.,

51.1” X, 25.6” Y, 24.6” Z-axis travels, CAT-50 taper, 6000 RPM, 20 HP,

30 pos. ATC, Tsudakoma Mdl. RVA-320 4th

axis rotary table, tailstock,

Adjust-Tru 6-jaw chuck, HP thru-spdl. coolant system, chip conveyor,

S/N AV631143

2262 1 4-AXIS CNC VERTICAL MACHINING CENTER, HAAS MDL. VF5/50,

new 12/2012, 52” x 23” tbl., 4000 lb. table load, 50” X, 26” Y, 25” Z-axis

travels, CAT-50 taper, 7500 RPM, 30 HP, 30 pos. ATC, 4th

axis rotary

table w/6-jaw chuck, tailstock, HP thru-spdl. coolant system, S/N

1100263

2263 1 4-AXIS CNC VERTICAL MACHINING CENTER, HAAS MDL. VF5/50,

new 12/2012, 52” x 23” tbl., 4000-lb table load, 50” X, 26” Y, 25” Z-axis

travels, CAT-50 taper, 7500 RPM, 30 HP, 30 pos. ATC, 4th

axis rotary

table w/6-jaw chuck, tailstock, HP thru-spdl. coolant system, S/N

1100247

2264 1 4-AXIS CNC VERTICAL MACHINING CENTER, HAAS MDL. VF2, new

12/2012, 36” x 14” table, 3000 lb. table load, 30” X, 16” Y, 20” Z-axis

travels, CAT-40 taper, 8100 RPM, 30 HP, 24 pos. ATC, Haas 4th

axis

rotary table w/6-jaw chuck & tailstock, HP thru-spdl. coolant, S/N

1100142

2265 1 4-AXIS CNC HORIZONTAL MACHINING CENTER, DOOSAN MDL.

HC400, new 2011, Fanuc 32i-Model A CNC control, (2) 15.7” sp.

pallets, .001 deg. Indexing, 23.6” X, 22” Y, 22.2” Z-axis travels, CAT-40

taper, 10,000 RPM, 35 HP, 40 ATC, Chipblaster HP thru-spdl. coolant,

S/N MH0001-000613

2266 1 4-AXIS CNC HORIZONTAL MACHINING CENTER, DOOSAN

“DIAMOND SERIES DHC400” 4-AXIS, new 2006, Fanuc Series 21iMB

CNC control, (2) 15.7” sq. pallets, .001 deg. Indexing, 24” X, 22” Y, 22”

Z-axis travels, CAT-40 taper, 10,000 RPM, 35 HP, 30 pos. ATC, chip

conveyor, Chipblaster HP thru-spdl. coolant, S/N HC400322

2267 1 4-AXIS CNC HORIZONTAL MACHINING CENTERS, OKUMA MDL.

MX40HA 4-AXIS, new 1998, Okuma OSPU100M CNC control, (2) 15.7”

sq. pallets, .001 indexing, 22” X, 24” Y, 22” Z-axis travels, CAT-40 taper,

8,000 RPM, 40 pos. ATC, tool presetter, Chipblaster HP thru-spdl.

coolant, chip filter system, S/N 0352

2268 1 FREE STANDING JIB CRANE, DAYTON 1/2 T. X 14' REACH,

approx. 10' under rail, Dayton 1/2 T. elec. chain hoist.

2269 1 MAPLE TOP WORKBENCH, w/50 Series charging station

Page 10


LOT QTY DESCRIPTION

2270 1 MAPLE TOP WORKBENCH, w/50 Series charging station

2271 1 ROTO HAMMER, HILTI MDL. TE54, w/bits

2272 3 JIGSAW DRILLS, DEWALT, w/temp. probe

2273 2 LOT CONSISTING OF SANDER, GRINDER & 7-1/4" CIRCULAR SAW

2274 5 PNEUMATIC DIE GRINDERS

2275 5 PNEUMATIC DIE GRINDERS

2276 1 LOT CONSISTING OF AIR SANDER, DEGRINDERS & DRILL,

assorted

2277 1 LOT CONTENTS OF WORKBENCH: assorted tools (bench not

included)

2278 2 TAPPING HEADS

2279 2 5C COLLET FIXTURES

2280 1 LOT OF FIXTURES: COLLET, GRINDING & BORING HEAD (approx.

4)

2281 1 TOOLPOST GRINDER

2282 2 OFFSET CUTTING DEVISES, PACE

2283 1 LOT OF COLLETS: 5C & ER

2284 2 TAILSTOCKS







2291 1 VERTICAL/HORIZONTAL ROTARY INDEXER, YUASA, 8"

2292 1 LOT OF LATHE CENTERS, assorted

2293 1 LOT OF LATHE CENTERS, assorted







2300 2 VISES (small)






2306 1 ROLLING CART, w/CAT-50 toolholders & ER collets

2307 1 ROLLING CART, w/CAT-50 toolholders







Page 11


LOT QTY DESCRIPTION


2315 1 PROBE, CAT-40 RENISHAW MP10

2316 1 PRO-MOTION CONTROL, DAEWOO


2318 1 LOT CONTENTS OF FOREMAN'S STATION: personal computer,

rolling cart, table

2319 1 LOT CONSISTING OF: refrigerator, microwave, cabinet, coffee maker,

water cooler

2320 1 LOT CONTENTS OF OFFICE: loveseat, desk, file cabinet, credenza,

chairs, printer, personal computer

2321 1 SHELVING UNIT, w/hold-downs

2322 1 SHELVING UNIT, w/hold-downs

2323 1 SHELVING UNIT, w/steel & carbide, assorted

2324 1 LOT OF RAW MATERIAL: copper & carbide (on one pallet)




2328 1 LOT OF CARBIDE ENDMILLS, assorted































Page 12


LOT QTY DESCRIPTION



2361 1 LOT OF COOLANT DRILLS, mostly GAR carbide, assorted

2362 1 LOT OF DRILL BITS, assorted





2367 1 LOT CONSISTING OF TAPS, DRILLS, CUTTERS, ENDMILLS,

assorted

2368 1 LOT OF DRILL BITS, mostly carbide, assorted

2369 1 LOT OF CABINETS (2), w/plumbing, electric, safety, abrasives, etc.,

assorted

2370 1 TOOL & CUTTER GRINDER, CINCINNATI MILACRON NO. 2, tilt

spdl., pwr. workhead, many accessories, S/N F5443-E-80-05-15

2371 1 ROLLING CART, w/attachments & accessories

2372 1 TOOL & CUTTER GRINDER, CINCINNATI MILACRON MONOSET,

assorted cams, index plates, S/N 3152A0180-0067

2373 1 SHELVING UNIT, w/accessories

2374 1 CABINET STYLE DUST COLLECTOR, DONALDSON TORIT

UNIMASTER MDL. UMA100, S/N 10065678-L1-1

2375 1 LOT CONTENTS OF DRAWER: grooving bars & inserts, assorted

2376 1 LOT CONTENTS OF DRAWER: taps, assorted

2377 1 LOT CONTENTS OF DRAWER: taps, assorted

2378 1 LOT CONTENTS OF DRAWER: taps, threadmills, carbide, assorted

2379 1 LOT CONTENTS OF DRAWER: center drills, endmills (mostly carbide),

assorted

2380 1 LOT CONTENTS OF DRAWER: long drills, drill chucks, assorted

2381 1 LOT CONTENTS OF DRAWER: taps, drill indexes, helicoil supplies,

assorted

2382 1 LOT CONTENT OF DRAWER: carbide inserts, assorted

2383 1 LOT CONTENTS OF DRAWER: carbide inserts, assorted

2384 1 LOT CONTENTS OF DRAWER: large gun drills, helicoil supplies,

gauges, assorted

2385 1 LOT CONTENTS OF DRAWER: carbide end mills, stamping kits,

assorted

2386 1 TOOLING CABINET, VIDMAR, 11-drawer

2387 1 LOT CONTENTS OF DRAWER: carbide cutters, chamfer mills, inserts,

assorted

2388 1 LOT CONTENTS OF DRAWER: carbide key cutters, assorted

2389 1 LOT CONTENTS OF DRAWER: mostly carbide, bullnose, roughing

endmills, assorted

2390 1 LOT CONTENTS OF DRAWER: insert mills, inserts, boring heads,

assorted

2391 1 LOT CONTENTS OF DRAWER: carbide inserts, milling cutters,

assorted

2392 1 LOT CONTENTS OF DRAWER: carbide forming tools, reamers, thread

chasers, dies, die head, assorted

2393 1 LOT CONTENTS OF DRAWER: drill bits, assorted

Page 13


LOT QTY DESCRIPTION

2394 1 LOT CONTENTS OF DRAWER: round over mills, hardware, assorted

2395 1 LOT CONTENTS OF DRAWER: grinding wheels, 1-2-3 blocks,

parallels, assorted

2396 1 TOOLING CABINET, VIDMAR, 9-drawer





2401 1 LOT CONTENTS OF DRAWER: knurling tools, threading inserts, collet

sleeves, assorted

2402 1 LOT CONTENTS OF DRAWER: lathe insert cutters, assorted

2403 1 LOT CONTENTS OF DRAWER: lathe insert cutters, assorted

2404 1 LOT CONTENTS OF DRAWER: taper, straight shank drill bits, ER

collet holders, assorted

2405 1 LOT CONTENTS OF DRAWER: taper, straight shank drill bits,

assorted


2407 1 LOT CONTENTS OF DRAWER: boring, grooving bars (mostly

carbide), assorted

2408 1 LOT CONTENTS OF DRAWER: boring, grooving bars (mostly

carbide), assorted

2409 1 LOT CONTENTS OF DRAWER: large boring, grooving bars (some

carbide), assorted

2410 1 LOT CONTENTS OF DRAWER: spade insert drills, inserts, assorted

2411 1 LOT CONTENTS OF DRAWER: large boring, grooving bars, assorted

2412 1 LOT CONTENTS OF DRAWER: toolholders, centers, boring bar

heads, assorted

2413 1 LOT CONTENTS OF DRAWER: cam drills, insert taps, assorted

2414 1 LOT CONTENTS OF DRAWER: insert drills, assorted

2415 1 LOT CONTENTS OF DRAWER: insert drills, carbide endmill tips (coro

mills), assorted


2417 1 LOT CONTENTS OF DRAWER: Mitsubishi & gas carbide coolant drills,

assorted

2418 1 LOT CONTENTS OF DRAWER: taps, misc. tooling, assorted

2419 1 LOT CONTENTS OF DRAWER: carbide inserts, micro 100 carbide

cutters, assorted

2420 1 LOT CONTENTS OF DRAWER: carbide coolant drills, end mills,

assorted

2421 1 LOT CONTENTS OF DRAWER: gun drills, assorted

2422 1 LOT CONTENTS OF DRAWER: mostly carbide endmills, drills,

assorted

2423 1 LOT CONTENTS OF DRAWER: gun drills, assorted

2424 1 LOT CONTENTS OF DRAWER: boring bar sleeves, assorted

2425 1 LOT CONTENTS OF DRAWER: carbide endmills, drills, assorted


2427 1 GRANITE SURFACE PLATE, 24" x 36" x 4"

2428 1 LOT OF REAMERS, assorted


Page 14


LOT QTY DESCRIPTION




2433 1 LOT OF COOLANT DRILLS, MITSUBISHI, assorted


















2450 1 LOT OF CARBIDE INSERTS, assorted


2452 1 LOT OF LATHE INSERT HOLDER CUTTERS, assorted

2453 1 LOT OF LATHE INSERT HOLDER CUTTERS, assorted

2454 1 LOT OF TOOLHOLDER BUSHINGS, assorted

2455 1 LOT CONTENTS OF DRAWER: carbide endmills, assorted






2461 1 LOT CONTENTS OF DRAWER: carbide endmills, carbide versa bars

2462 1 LOT CONTENTS OF DRAWER: boring bars, lathe cutters

2463 1 LOT CONTENTS OF DRAWER: boring bars, carbide endmills

2464 1 TOOLING CABINET, 9-drawer

2465 1 LOT CONTENTS OF DRAWER: chamfer mills, centers, taps

2466 1 LOT CONTENTS OF DRAWER: carbide endmills

2467 1 LOT CONTENTS OF DRAWER: carbide endmills, cutters, taps

2468 1 LOT CONTENTS OF DRAWER: spade hit inserts, drills, endmills,

inserts

2469 1 LOT CONTENTS OF DRAWER: cutters, drills, endmills, reamers



2472 1 LOT CONTENTS OF DRAWER: insert endmills, inserts

2473 1 LOT CONTENTS OF DRAWER: boring bars, lathe insert cutters

2474 1 TOOLING CABINET, 9-drawer

2475 1 DRILL INDEX, 4-cabinet

Page 15


LOT QTY DESCRIPTION



2478 1 LOT CONTENTS OF SHELF: endmills, reamers, supplies

2479 1 SHELVING UNIT, w/large amount of carbide tooling



2482 1 LOT OF GUN DRILLS (in 5 gal. pail)

2483 1 LOT OF GUN DRILLS (in 5 gal. pail)

2484 1 LOT CONSISTING OF STEEL RACK & (2) ROLLING CARTS (2),

w/contents of aluminum fixtures, assorted

2485 1 ROLLING RACK, w/carbide tooling, assorted

2486 1 LOT CONSISTING OF SHOP CART FILE CABINET, ROLLING, parts,

bins w/hardware, assorted

2487 1 MAPLE TOP WORKBENCH, w/Wilton vise (contents not included -

delayed removal)

2488 1 MAPLE TOP WORKBENCH, w/computer & printer

2489 1 TOOL PRESETTER, DMG MDL. ECO210 MICROSET, new 2008, PC

& printer, S/N 99510011898


2490 1 CNC WIRE EDM MACHINE, SODICK MDL. AQ750LH HIGH

COLUMN, new 7/2012, Sodick LN2WH CNC control, 29.52" X, 19.60"

Y, 23.62" Z, 30.31" U & 20.47" V-axis travels, 49.76" x 38.30" work tank

dims., 23.62" max. workpiece ht., 3,330 lb. max. workpiece weight, +/-

30 deg. taper angle, AWT, water conditioning system & filters, S/N 0833

2491 1 CNC WIRE EDM MACHINE, SODICK MDL. AQ750L, new 11/2010,

Sodick LN2W CNC control, 29.52" X, 19.60" Y, 15.7" Z, 30.31" U &

20.47" V-axis travels, 49.76" x 38.30" work tank dims., 15.7" max.

workpiece ht., 300 lb. max. workpiece weight, AWT, drop tank design,

water conditioning system w/cartridge filters, scrap wire chopper, S/N

0765

2492 1 CNC WIRE EDM MACHINE, SODICK MDL. AG400L, new 2013,

submerged Sodick LN2W CNC control, linear motor drive, 15.75" X,

11.81" Y , 9.84" Z, 4.72" U & 4.72" V-axis travels, .003" to .012" wire

dia. range, 16.54" per second max. wire feed rate, fixed jet AWT, water

conditioning system, scrap chopper, S/N 1239

2493 1 CNC WIRE EDM MACHINE, SODICK MDL. AG400L, new 2013,

submerged Sodick LN2W CNC control, linear motor drive, 15.75" X,

11.81" Y , 9.84" Z, 4.72" U & 4.72" V-axis travels, .003" to .012" wire

dia. range, 16.54" per second max. wire feed rate, fixed jet AWT, water

conditioning system, scrap chopper, S/N 1240

2494 1 WIRE EDM ROTARY TABLE, Sodick Mdl. WS-5P dia. rotary table, 6.1"

dia., 44 lb. permissible load, 3.1" center ht., vert./horiz. design

2495 1 CNC RAM TYPE EDM MACHINE, SODICK MDL. AQ55L, new 8/2007,

Sodick LQ1G CNC control, linear motor drive, 29.5” x 21.6” table, 37.4”

x 28.5” x 16.1” work tank., 21.65” X, 15.7” Y, 13.77 Z-axis travels,

System 3R 20mm chuck, 6 pos. ATC, drop tank design, Sodick Mdl.

40B 80 amp ttl. aux. pwr. supply, S/N 1005

Page 16


LOT QTY DESCRIPTION

2496 1 CNC RAM TYPE EDM MACHINE, SODICK MDL. AG40L, new 2012,

Sodick LN-2 CNC control, linear motor drive system, 23.6” x 15.7” table,

29.5” x 24.4” x 13.77” work tank., 15.7” X, 11.8” Y, 10.6” Z-axis travels,

1,200 lb. max. weight, System 3R 20mm chuck, 4 pos. ATC, drop tank

design, S/N A021

2497 1 CNC RAM TYPE EDM MACHINE, SODICK MDL. AG40L, new 2012,

Sodick LN-2 CNC control, linear motor drive system, 23.6” x 15.7” table,

29.5” x 24.4” x 13.77” work tank., 15.7” X, 11.8” Y, 10.6” Z-axis travels,

1,200 lb. max. weight, System 3R 20mm chuck, 4 pos. ATC, drop tank

design, S/N 0539

2498 1 CNC RAM TYPE EDM MACHINE, SODICK MDL. AQ35L, new 9/1999,

Sodick LN1 CNC control, 23.6” x 15.7” table, 29.5” x 21.6” x 12.5 work

tank, 13.77” X, 9.8” Y, 9.8” Z-axis travels, 20mm chuck, 40 amp pwr.

supply, S/N D115

2499 1 EDM DRILL, MITSUBISHI MDL. ED-2000M, new 11/2007, 12-1/2" x 15-

3/4" table, D.R.O., S/N 1004-1166

2500 1 LOT CONTENTS OF STEEL SHELVING, EDM wire, graphite, EDM

supplies, assorted

2501 1 LIQUID CONTAINMENT TOTE

2502 3 ROLLING SHOP CARTS, w/scrap metal

2503 1 DIE LIFT CART, MANUAL

2504 1 STEEL CABINET, w/EDM fixtures, supplies

2505 1 LOT OF EDM WIRE (8 boxes)

2506 1 LOT CONSISTING OF BRIDGEPORT MACHINE VISE, SMALL VISE,

RIGHT ANGLE ATTACHMENT, assorted

2507 1 LOT CONSISTING OF COLLET FIXTURES (5), V-BLOCKS, R8

COLLETS, assorted

2508 1 LOT OF HAND TOOLS, assorted



2511 1 MAPLE TOP WORKBENCH, w/computer

2512 1 STEEL SHELVING UNIT w/EDM filters


2513 1 4-AXIS CNC HORIZONTAL MACHINING CENTER, DOOSAN MDL.

HP6300, new 9/2011, Fanuc 31i-MODEL A CNC control, (2) 24.8” sq.

pallets, 2,200 lb. pallet load, .001 indexing, 39.4” X, 33.5” Y, 33.5” Z-axis

travels, CAT-50 taper, 12,000 RPM, 40 HP, 120 pos. ATC, Chipblaster

HP thru-spdl. coolant, chip conveyor, S/N MH0007-00197


7500/60”, new 4/2012, Fanuc 21i Series CNC control, 63” x 29.5” table,

60” X, 30” Y, 24.6” Z-axis travels, CAT-50 taper, 6000 RPM, 20 HP, 30

pos. ATC, MMK Mdl. TR401H2E03 4th

axis rotary table w/tailstock,

Adjust-Tru 6-jaw chuck, 6-1/2" thru hole, thru-spdl. coolant, chip

conveyor, S/N MV0051-000525


6500/50”, new 12/2011, Fanuc 21i Series CNC control, 55.1” X 26.3”

table, 50” X, 26.3” Y, 24.6” Z-axis travels, CAT-50 taper, 6000 RPM, 20

HP, 30 pos. ATC, Kitagawa Mdl. MR320RAE09 CNC rotary table,

Adjust-Tru 6-jaw chuck, tailstock, HP spdl. coolant system, S/N

MV0049-00818 Page 17


LOT QTY DESCRIPTION

2516 1 CNC LATHE, DAEWOO “PUMA 400LC”, new 4/2012, Fanuc 21i

Series CNC control, 27.5” sw. over bed, 21.65" max. turning dia.,

81.65" max. work length, 6.5” bap cap., spds: 15-1500 RPM, 30 HP,

Samchully Mdl. MH-221 21" hyd. chuck, Shunk Mdl. THL4 hyd.

steadyrest, 12-sta. turret, tailstock, chip conveyor, S/N ML0134004508

2517 1 CNC LATHE, DAEWOO “PUMA 400LC”, new 2/2012, Fanuc 21i

Series CNC control, 27.5” sw. over bed, 21.65" max. turning dia.,

81.65" max. work length, 6.5” bap cap., spds: 15-1500 RPM, 30 HP,

Samchully Mdl. MH-221 21" hyd. chuck, Shunk Mdl. THL4 hyd.

steadyrest, 12-sta. turret, tailstock, chip conveyor, S/N ML0134-004489

2518 1 MIST COLLECTOR, AIRFLOW SYSTEMS MDL. MPH8V2-PG6-EXHE-

DL, 1 HP

2519 1 MIST COLLECTOR, AIRFLOW SYSTEMS MDL. MPH8V2-BI-PG6-DL-

EXHE-LE, 1 HP

2520 1 5-AXIS HORIZONTAL MACHINING CENTER, HAAS MDL. EC1600,

new 1/2013, Haas CNC control, 30” x 64” plain table w/30” built in CNC

rotary table, 10,000 lb. table load, 64” X, 50” Y, 32” Z-axis travels, CAT-

50 taper, 7500 RPM, 30 HP, 50 pos. ATC, HP thru-spdl. coolant, S/N

2053991

2521 1 ROTARY TABLE, HAAS 20", 5th axis, 7-1/2" thru hole, Adjust-tru 6-jaw

chuck

2522 1 6-AXIS VERTICAL MACHINING CENTER, DECKEL MAHO “DMF

260”, new 2012, Siemens 840D Ergoline CNC control 114.17” x 27.55”

table, 4700 lb. table load, 102.36” X, 27.55” Y & 27.55” Z-axis travels, +/-

110 deg. B-axis head swivel, 29.5” dia. integrated horiz. rotary tbl., HSK-

A63 taper, 18,000 RPM, 35 kw, 60 pos. ATC, MMK Mdl. TR401H2E03

CNC rotary table & tailstock, 6-jaw Adjust-Tru chuck, chip conveyor, HP

thru-spdl. coolant system, paper filter filtration system, Power Probe,

Blum laser tool probe, S/N 15165262704

2523 1 ROLLING CART, w/HSK-63 toolholders, assorted

2524 1 ROTARY SCREW AIR COMPRESSOR, KAESER MDL. SM-8, 7.5 HP,

air receiver, S/N 1052

2525 1 LOT CONTENTS OF OFFICE: CNC Programming System, featuring

Dell Precision T7600 solid box engineering workstation, Twin Dell

monitors, assorted software, w/contents of office, desks, file cabinet,

chairs


2527 1 STEEL SHELVING UNIT, w/contents of mostly aluminum fixtures,

assorted

2528 1 FREE STANDING JIB CRANE, ABELL-HOWE 1 T. X 18' REACH, 14'

under rail, Harrington 1 T. cap. elec. chain hoist


under rail, CM 1 T. cap. elec. chain hoist


2531 1 ROTARY TABLE, SMW, 4th axis, w/tailstock & control

2532 1 ROLLING CART, w/CAT-50 toolholders (approx. 60) & tooling,

assorted 2533 1 ROLLING CART, w/CAT-50 toolholders (approx. 65), tooling, ER

collets, assorted

Page 18


LOT QTY DESCRIPTION

2534 1 ROLLING CART, w/CAT-50 toolholders (approx.50), tooling, ER collets,

assorted

2535 1 ROLLING CART, w/CAT-50 toolholders (approx.35), tooling, assorted

2536 1 ANGLE SPINDLE ATTACHMENT, NAKANISHI, 90 deg., CAT-40

2537 1 ANGLE SPINDLE ATTACHMENT, 90 deg., CAT-50

2538 2 BORING BARS, large, w/chargeable heads

2539 1 LOT OF BORING BARS, assorted

2540 1 LOT OF BORING BARS, assorted2541 1 LOT OF LATHE INSERT CUTTERS, assorted

2542 1 LOT OF LATHE INSERT CUTTERS, assorted

2543 1 LOT OF LATHE CENTERS, assorted2544 1 LOT OF LATHE CENTERS, assorted2545 1 5C COLLET FIXTURE, 5C





2550 1 MACHINE VISE, 8" dia. jaw

2551 1 MACHINE VISE, KURT, 8" dia. jaw





2556 1 LOT CONSISTING OF ER COLLETS & HOLDERS, assorted

2557 1 CARBIDE ENDMILLS, assorted

























Page 19


LOT QTY DESCRIPTION

2582 1 LOT OF COOLANT DRILLS, GARR, assorted

2583 1 LOT OF CARBIDE FORMING TOOLS, assorted

2584 1 LOT OF COOLANT DRILLS, GARR, assorted

2585 1 LOT OF TAPS & CUTTERS, assorted

2586 1 LOT OF COOLANT DRILLS & REAMERS, assorted


2588 1 LOT OF INSERTS: carbide, spade & cam, assorted

2589 1 LOT OF INSERT CUTTING TOOLS, assorted

2590 1 LOT OF CARBIDE SCRAP

2591 2 TOOLING SAMPLE CASES, WALTER, w/assorted drills & cutters

2592 1 MAPLE TOP WORKBENCH, w/50 Series charger station


2594 1 MAPLE TOP WORKBENCH, w/50 Series tool charger station (contents

not included - delayed removal)







2599 1 LOT CONSISTING OF REFRIGERATOR, MICROWAVE, COFFEE

MAKER, assorted

2600 1 LOT OF STEEL ROLLING SHOP CARTS (approx. 6)

2601 1 PALLET JACK, 5,000 lb. cap.


under rail, Dayton 2,000 lb. cap. elec. chain hoist

2603 1 ROTARY SCREW AIR COMPRESSOR, KAESER MDL.SM15, new

2012, 15 HP, hz. air receiver, 53 CFM, S/N 1125

2604 1 STEEL SHELF UNIT, w/fixtures, supplies, assorted

2605 1 LOT OF CHIP, assorted (in approx. 5 barrels)

2606 1 LOT OF FOREMAN'S STATION, w/computer, water cooler, assorted


2607 2 MAPLE TOP WORKBENCHES






2613 2 FREE STANDING JIB CRANES, DAYTON 1/2 T. CAP., no hoist

2614 1 LATHE, WARNER & SWASEY 2A

2615 1 HORIZONTAL BANDSAW, RUSCH

2616 1 LOT REMAINING CONTENTS IN BARN: scrap metal & articles (large

quantity) (excluding tagged items & marked pallets of rigging apparatus

for sold machinery)

***SALE PROCEEDS OUTSIDE***

2617 1 FORKLIFT, TCM 8,000 LB. CAP. (est.), propane engine, 2-stage mast,

tilt, 60" forks, air tires, S/N N.A.

Page 20


LOT QTY DESCRIPTION

2618 1 FORKLIFT, TCM MDL. FGC25-3L, LPG engine, 4,700 lb. cap. @ 24"

L.C., see thru 2-stage mast, 130" max. lift, 48" forks, side shift, cushion

tires, S/N A47F01479 (delayed removal)

2619 1 PICKUP TRUCK, 2009 CHEVROLET SILVERADO MDL. 2500HD, full

size bed, spray bed liner, Odo: 35,812 miles, TX License No. 90MDJ9,

VIN 1GCHC44K59F134221

2620 1 FLATBED TRUCK, 2005 ISUZU MDL. NPR, turbo diesel engine, 14'

diamond plate bed w/welded wire surround, rub rails & stake pockets,

Odo: 293,306 miles, TX License No. BP84739, VIN

JALC4B16857006870

2621 1 LOT CONTENTS OF BREAKROOM & RECEPTION AREA: tables,

refrigerator, microwave, TV, reception desk, loveseat, chairs (nothing

attached to walls)

2622 1 LOT CONTENTS OF OFFICE: desk, credenza, file cabinet, chair,

personal computer, monitors (2)

2622A 1 WIDE FORMAT PRINTER, HEWLETT-PACKARD DESIGNJET 500

PS, 26"W. cap., Factory Mdl. C7769B, S/N SG3C16201B

2623 1 LOT CONTENTS OF OFFICES (2): desks, credenza, file cabinet,

bookshelf, chairs, personal computer, monitors (3), H.P. LaserJet 200

printer, H.P. LaserJet 5100TN printer

2624 1 LOT CONTENTS OF OFFICE: desk, credenzas (2), file cabinets (4),

bookshelf, chair, monitors (2), printer

2625 1 LOT CONTENTS OF OFFICE: desk, credenza, file cabinet, couch,

monitors (2) (built-in bookcase unit not included)

2626 1 LOT CONTENTS OF OFFICE: desks (2), file cabinet, chairs (2), printer,

personal computer (built- in cabinet on wall not included)

2627 1 LOT CONTENTS OF FILE ROOM: file cabinets (6), fax machine,

Canon Image Runner3035 copier

Page 21

Documents

SHAMROCK PRECISION OPERATIONS LLC CATALOG