ICorr PaIntIng and CoatIng InsPeCtor
www.sgs.Com/ndt-traInIng
about the InstItute of CorrosIon (ICorr)The Institute of
Corrosion is a Learned Society and Registered Charity that has been
serving the corrosion science, technology and engineering community
in the fight against corrosion since 1959.
Key to this fight are the establishment and promotion of sound
corrosion management practices, the
advancement of cost effective corrosion control measures, and
the sustained effort to raise corrosion awareness in all stages of
design, fabrication and operation.
The Institute endorses a series of comprehensive and structured
training programs covering essential aspects of the various
disciplines within the areas of protective treatment
inspection.
All ICorr courses are based on ISO, EN and related international
standards and meet the requirements of BS EN 17024 the general
criteria for certification bodies.
SGS Training and Examination Center offers Painting and Coating
training courses and examinations in accordance with the Institute
of Corrosion (ICorr). The training courses are designed especially
to prepare individuals for the end of course examinations for
Painting Inspector Level 1 and subsequently for the Coatings
Inspector Level 2 examination.
LeveL 2
generaL theoryn Quality assurance and document control n
Equipment control and calibration n Inspection and quality control
n Normative documents n Epoxy resin powder coatings n Enamel
coatingsn Multi-component liquids
n Wrapping tapes n Elastomeric coatings n Polyolefins/plastic
coatings n Fillers n Surface preparation n Internal coatings n
Application methods n Advantages/disadvantages of systems
n Repair methods n Inspection methods n Ditching and backfill n
Cathodic protection n Standards n Health and safety n Pearson
survey n Handling and storage
LeveL 1
generaL theoryn QA, QC and inspection (basics) n Normative
documents n Corrosion (iron and steel) n Surface preparation
(ferrous) n Tests to detect surface contamination n Coating
categories/types
n Main paint constituents n Paint drying and curing n Corrosion
protection methods (basics) n Layers of a paint filmn Types of
paint systems n Paint data sheets n Paint/paint film testing
n Weather conditions n Paint application methods n Coating
faults n Health and safety n Environmental considerations n
Reporting n Applicable standards
ICorr PaIntIng and CoatIng
0
1/20
11 S
GS.
All
right
s re
serv
ed.
PaIntIng InsPeCtor - ICorr LeveL 1 Approved by the Institute of
Corrosion (ICorr UK), this course is designed to prepare
individuals for the ICorr Painting Inspector Level 1 examination.
The course is suitable for candidates with or without experience in
industrial painting or inspection. It is also applicable to those
who require knowledge of painting inspection but do not wish to
take an examination. The course covers most of the paint systems
used in the industry as well as other coating systems used for
anti-corrosion purposes.
Painting Inspector Level 1 training is offered as a single 5-day
course. If candidates successfully pass the Painting Inspector
Level 1 examination, they can join the Coatings Inspector Level 2
examination which takes a further 3 days and follows immediately
after the Painting Inspector course. Candidates who only wish to
attend the Coating Inspector Level 2 course have to either
successfully pass the Painting Level 1 examination first, or take
the full 5-day Coating Inspector Level 2 course.
PIPeLIne CoatIngs InsPeCtor - ICorr LeveL 2Approved by the
Institute of Corrosion (UK), this course is designed to prepare
individuals for the ICorr Pipeline Coatings Inspector Level 2
examination. The course covers the inspection of over fifteen types
of coatings applied in both the factory and the field. The 5-day
course is suitable for all candidates however, a 3-day version is
available for ICorr Painting Inspectors who do not want to revisit
the subject areas common to both Painting Inspection and Pipeline
Coating Inspection.
ContaCt usSGS NDT Training & Examination Centre2F, Building
8, No. 69, 1159, EastKangqiao Road, Pudong DistrictShanghai 201319,
P. R. ChinaT +86 21 6818 3905F +86 21 6818
[email protected]/ndt-training
