Sewbo robot can sew a t-shirt thanks to stiffened fabric 24 September 2016, by Nancy Owano (Tech Xplore)—A robot that sews has attracted attention of a number of sites watching for news in robotics systems. Sewbo has announced what the company says is the world's first robotically sewn garment. This industrial robot produced a sewn t-shirt. The company thinks manufacturers can capture potential benefits of higher quality clothing at lower cost. "It will shorten supply chains," the company said, and lessen long lead times that hamper these industries . The feat is impressive considering the difficulties robots pose. They have far less trouble working with materials as hard as sheet metal but limp fabrics? Sewbo's clever idea: Make the fabric temporarily stiff. As far as the robot "knows," it works with rigid cloth. "The water-soluble stiffener is removed at the end of the manufacturing process with a simple rinse in hot water," said the Sewbo site, " and the stiffener can be recovered for reuse. Key ingredient: polyvinyl alcohol. This is "a non- toxic polymer that is already used elsewhere in the textile production process as a 'sizing' that temporarily strengthens yarn during weaving," said Lauretta Roberts, editor in chief of The Industry. Sewbo also relayed details about the ingredient and process in Design News. "The stiffening process works on every fabric we've tried it with so far," he said. That includes cotton/poly blends , denim, lace, and some upholstery fabrics. "It's limited to fabrics that can get wet all the way through, so it's not suitable for coated materials, like leather or materials that have been treated to be waterproof." Zornow told Sourcing Journal that the project goal was to use as much off the shelf technology as possible. Sewbo used an off-the-shelf industrial robot . They taught it how to operate a consumer sewing machine . According to the company they are working towards commercializing the technology. In the comments section of The Industry, a reader asked how many shirts could this robot sew in one hour. Zornow's answer: "At the current proof-of- concept stage it takes over half an hour to sew a shirt – the actual sewing is only a couple of minutes, just normal sewing machine speed, but there's a lot of measuring and adjusting going on in between steps. We expect that it will be eventually done at about the same speed as it takes for manual assembly, if not slightly faster." What's next? Signe Brewster in MIT Technology Review said that "Zornow is looking for commercial partners who want to use the technology and help him work out the remaining kinks. Companies would likely set up assembly lines with the robots, with each taking on a specific task on a garment ." Fundamentally, this is a process where, as Brewster put it, "a robotic arm guides chemically 1 / 2

Sewbo robot can sew a t-shirt thanks to stiffened fabric

Download PDF Report

Upload
others
View
3
Download
0

Embed Size (px)

Citation preview

Page 1: Sewbo robot can sew a t-shirt thanks to stiffened fabric

Sewbo robot can sew a t-shirt thanks tostiffened fabric24 September 2016, by Nancy Owano

(Tech Xplore)—A robot that sews has attractedattention of a number of sites watching for news inrobotics systems. Sewbo has announced what thecompany says is the world's first robotically sewngarment.

This industrial robot produced a sewn t-shirt. Thecompany thinks manufacturers can capturepotential benefits of higher quality clothing at lowercost. "It will shorten supply chains," the companysaid, and lessen long lead times that hamper theseindustries.

The feat is impressive considering the difficultiesrobots pose. They have far less trouble workingwith materials as hard as sheet metal but limpfabrics?

Sewbo's clever idea: Make the fabric temporarilystiff. As far as the robot "knows," it works with rigidcloth. "The water-soluble stiffener is removed atthe end of the manufacturing process with a simplerinse in hot water," said the Sewbo site, " and thestiffener can be recovered for reuse.

Key ingredient: polyvinyl alcohol. This is "a non-

toxic polymer that is already used elsewhere in thetextile production process as a 'sizing' thattemporarily strengthens yarn during weaving," saidLauretta Roberts, editor in chief of The Industry.

Sewbo also relayed details about the ingredientand process in Design News. "The stiffeningprocess works on every fabric we've tried it with sofar," he said. That includes cotton/poly blends,denim, lace, and some upholstery fabrics. "It'slimited to fabrics that can get wet all the waythrough, so it's not suitable for coated materials,like leather or materials that have been treated tobe waterproof."

Zornow told Sourcing Journal that the project goalwas to use as much off the shelf technology aspossible. Sewbo used an off-the-shelf industrialrobot. They taught it how to operate a consumersewing machine. According to the company theyare working towards commercializing thetechnology.

In the comments section of The Industry, a readerasked how many shirts could this robot sew in onehour. Zornow's answer: "At the current proof-of-concept stage it takes over half an hour to sew ashirt – the actual sewing is only a couple ofminutes, just normal sewing machine speed, butthere's a lot of measuring and adjusting going on inbetween steps. We expect that it will be eventuallydone at about the same speed as it takes formanual assembly, if not slightly faster."

What's next? Signe Brewster in MIT TechnologyReview said that "Zornow is looking for commercialpartners who want to use the technology and helphim work out the remaining kinks. Companieswould likely set up assembly lines with the robots,with each taking on a specific task on a garment."

Fundamentally, this is a process where, asBrewster put it, "a robotic arm guides chemically

1 / 2

http://www.sewbo.com/

http://www.designnews.com/author.asp?section_id=1386&doc_id=281577

https://techxplore.com/tags/industrial+robot/

http://www.sewbo.com/press/

https://www.technologyreview.com/s/602423/a-robot-that-sews-could-take-the-sweat-out-of-sweatshops/

https://techxplore.com/tags/robotic+arm/

Page 2: Sewbo robot can sew a t-shirt thanks to stiffened fabric

stiffened pieces of fabric through a commercialsewing machine."

More information: www.sewbo.com/

© 2016 Tech XploreAPA citation: Sewbo robot can sew a t-shirt thanks to stiffened fabric (2016, September 24) retrieved 22March 2022 from https://techxplore.com/news/2016-09-sewbo-robot-t-shirt-stiffened-fabric.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, nopart may be reproduced without the written permission. The content is provided for information purposes only.

2 / 2

http://www.sewbo.com/

https://techxplore.com/news/2016-09-sewbo-robot-t-shirt-stiffened-fabric.html

http://www.tcpdf.org