SET BACK AREA - Rumber Materials

Call Us Toll Free 877-RUMBER1 www.rumber.com

RUMBER SET BACK AREA

SET BACK AREASAFETY. PERFORMANCE. COST-SAVINGS.


RUMBER SET BACK AREARUMBER SET BACK AREA

Rumber products are safer, better performing and more cost-effective than any option available.

Rumber Materials LLC manufactures composite material boards, sheets, and molded

products from 100% recycled tire rubber and plastics through its patented process.

These environmentally friendly products are extremely durable and impervious to fluids,

mud, oil, and UV rays, making them more desirable replacements for wood and plastics

in a variety of applications. A few of these applications include oil and gas, agriculture,

industrial, and military applications, with features which clearly out-perform other

materials, resulting in less down-time, fewer replacement costs, and extended product life.

WHY RUMBER?

5x

15 2000

100%LONGER THAN WOOD

YEARS IN THE INDUSTRY

MAJOR OIL RIGS WORLDWIDE

RECYCLED MATERIALS

lasts

used over used on over

made from


RUMBER SET BACK AREARUMBER SET BACK AREA

FEATURES & BENEFITS

100% Recycled Materials Product

Exact Dimensions–No Waste

Simple to Install and Easy to Clean

Traction Surface

Impervious to Fluids, Mud, Oil, & UV Rays

ATSM Tested With All Drilling Muds

Withstands Extreme Heat & Cold

Reduces Slippage & Increases Safety

Durable and Long-Lasting

Will Not Crack, Splinter, or Rot

Wide Variety of Applications

Most Cost-Effective Option

Environmentally Friendly

Will Not Damage Pipe Threads

FEATURES BENEFITS




RUMBER IN USESET BACK AREA EXAMPLES



MIXER

EXTRUDER

plastics

tires

products

What is Rumber?

Rumber is produced through its patented process

in which ground whole tire rubber and recycled

plastics are mixed and extruded through a profile

die. Once the extruded board cools, it results in a

product which is rigid and can be cut and drilled

like wood, but is also more flexible, durable and

impervious to fluids and UV Rays.

Rumber products can take the shape of boards,

timbers, sheets and molded forms.


Dear Rumber,

In December of 2001, I replaced my set back area with

Rumber. I have been working on an oil rig, drilling in the

oil field for over 20 years. I have drilled all over the world

- Texas, California, Dakotas, Middle East, South America &

Offshore. We installed a Rumber set back area on my rig

and have yet to have replaced the set back area. If I was

using wood I would have had to replace my wood set back

area 4-5 times.

Rumber has increased my rig’s performance, safety,

around 10 times less downtime, and saved my company

money. Rumber rocks.

- Oil RIg Tool Pusher

CUSTOMERTESTIMONIAL


10xLESS DOWNTIME

around




SATISFIED CUSTOMERS



XX

BOOT

BOOT

Setback Area with Mouse Hole

Setback Area without Mouse Hole

X

X

X

X

X

X

XX

X

X

X

X

X

X

MEASURING GUIDEPlease record all measurments in inches.





RUMBER BOARDSSTOCK # ACTUAL SIZE DESCRIPTION LBS. PER FT.

8005 3/4" x 5-1/8" Plank 80-20 Plank Board 1.66

8007 7/8" x 6-3/4" Plank 80-20 Plank Board 2.64

9801 7/8" x 6-3/4" Plank Board 2.48

9803 7/8" x 6-3/4" Plank Board Diamond Surface 2.48

9805 7/8" x 7-3/4" Ship-lap Board 2.88

9806 7/8" x 7-3/4" Ship-lap Board Traction Surface/Cleat 2.88

9807 7/8" x 7-3/4" Ship-lap Board Diamond Surface 2.88

9808 7/8" x 7-3/4" Ship-lap Board Traction Surface 2.88

9811 3/4" x 5-1/8" Plank Board 1.66

9812 3/4" x 5-1/8" Plank Board Traction Surface 1.66

9813 3/4" x 5-1/8" Plank Board Diamond Surface 1.66

4119 7/8" x 6-3/4" Rumber EZ Runner Track 1.50

9905 1-1/8" x 5-1/2" Ship-lap Board 2.60

9907 1-1/8" x 5-1/2" Ship-lap Board Diamond Surface 2.60

9908 1-1/8" x 5-1/2" Ship-lap Board Traction Surface 2.60

9502 1-1/8" x 5-1/2" Tongue & Groove Traction Surface 3.70

9102 1-1/2" x 7" Tongue & Groove Traction Surface 4.56

9108 1-1/2" x 8" Tongue & Groove Traction Surface 4.76

9302 1-1/2" x 7-1/16" Tongue & Groove Traction Surface 4.08

9501 1-1/2" x 5-1/2" Tongue & Groove Board 3.70

9101 1-1/2" x 7" Tongue & Groove Board 4.56

9107 1-1/2" x 8" Tongue & Groove Board 4.76

9301 1-1/2" x 7-1/16" Tongue & Groove Board 4.08

4131 1" x 3" Plank Board 1.54

4128 2" x 3" Plank Board 2.35

9602 1-1/2" x 3-1/2" Plank Board Traction Surface 2.00


9104 1-1/2" x 7" Plank Board Traction Surface 4.56

PRODUCT LISTSpecifications & Technical Data

NOTE: Board width may vary +/- 1/8"

Diamond plate

Cut

Slick

Traction Surface Options

Buffed



Best Seller

4136

Best Seller

9212

2-1/2" x 12"

6" x 3"

RUMBER BOARDSSTOCK # ACTUAL SIZE DESCRIPTION LBS. PER FT.

9601 1-1/2" x 3-1/2" Plank Board 2.00

9503 1-1/2" x 5-1/2" Plank Board 3.70

9103 1-1/2" x 7" Plank Board 4.56





9408 1-3/4" x 8" Plank Board with 2” Cleat & Traction Surface

6.00

9410 1-3/4" x 9.5" Plank Board Traction Surface 7.90

9412 1-3/4" x 11.5" Plank Board Traction Surface 9.32



9445 1-3/4" x 4-1/2" Plank Board 3.15

9405 1-3/4" x 5-3/4" Plank Board 4.03

9401 1-3/4" x 7-1/4" Plank Board 5.25

9403 1-3/4" x 8-1/8" Plank Board 5.64

9409 1-3/4" x 10" Plank Board 7.90

9411 1-3/4" x 12" Plank Board 9.32

9203 2-1/2" x 4" Plank Board 4.08

9211 2-1/2" x 12" Plank Board 12.50

4126 3-1/2" x 3-1/2" Dunnage per foot 4.80



4133 3" x 5" Dunnage per foot 6.06

4134 3" x 5" Dunnage per foot - Traction 6.06

4135 3" x 6" Dunnage per foot 7.25

4136 3" x 6" Dunnage per foot - Traction 7.25

4179 6-7/8" x 9" Timber per foot 23.40

9000 2" Round Rod 1.50

PRODUCT LISTSpecifications & Technical Data

NOTE: Board width may vary +/- 1/8"



VOLUME CHANGESAMPLE MEDIUM SIZE (in.) % CHANGE

AS RECEIVED 1.355 x 1.381

168 hrs at ambient Whole NOV 40 Mud 1.403 x 1.415 +6%


168 hrs at 110 °F Whole NOV 40 Mud 1.412 x 1.480 +15%


168 hrs at 3 °F Whole NOV 40 Mud 1.398 x 1.371 +1%


168 hrs at ambient Oil Base Mud (Disel Based) 1.536 x 1.415 -1%


168 hrs at 110 °F Oil Base Mud (Disel Based) 1.600 x 1.646 +10%


168 hrs at 3 °F Oil Base Mud (Disel Based) 0.922 x 0.949 -6%

HARDNESS TESTINGSAMPLE MEDIUM SHORT A AVERAGE % CHANGE

AS RECEIVED 89

168 hrs at ambient Whole NOV 40 Mud 76 -15%

AS RECEIVED 90

168 hrs at 110 °F Whole NOV 40 Mud 73 -18%

AS RECEIVED 89

168 hrs at 3 °F Whole NOV 40 Mud 90 0%

AS RECEIVED 95

168 hrs at ambient Oil Base Mud (Disel Based) 80 -16%

AS RECEIVED 94


AS RECEIVED 85


TECHNICAL SPECIFICATIONSOil Based Mud Testing



WEIGHT CHANGESAMPLE MEDIUM WEIGHT (g) % CHANGE

AS RECEIVED 48.5

168 hrs at ambient Whole NOV 40 Mud 46.2 -5%

AS RECEIVED 44.3

168 hrs at 110 °F Whole NOV 40 Mud 50.6 +14%

AS RECEIVED 43.1

168 hrs at 3 °F Whole NOV 40 Mud 45.2 +6%

AS RECEIVED 38.3

168 hrs at ambient Oil Base Mud (Disel Based) 38.3 0%

AS RECEIVED 57.3

168 hrs at 110 °F Oil Base Mud (Disel Based) 66.3 +16%

AS RECEIVED 13.5

168 hrs at 3 °F Oil Base Mud (Disel Based) 14.6 +12%

TECHNICAL SPECIFICATIONSOil Based Mud Testing



TEST METHOD RESULT

Flash Ignition Temperature ASTM D1929 620 °F (327 °C)

Self Ignition Temperature ASTM D1929 820 °F (438 °C)

Flame Spread ASTM D635 7 minutes, 30 seconds average over a 3” length, consumed 100%

Abrasion Resistance ASTM D1037ASTM F510

0.028% mass loss in 1,000 cycles22.72 mm volume loss in 1,000 cycles

Water Absorption ASTM D1037 No water absorption

Water Absorption ASTM D570 0.43%

Density ASTM D792 0.924 g/cc

Specific Gravity ASTM D792 0.982

Coefficient of Friction ASTM C1028

ASTM D2392

Static coefficient of friction: Dry = 0.49 Wet = 0.46Sliding coefficient of friction:Dry = 0.56 Wet = 0.54

Compressive Strength Modulus ASTM D143 37,225 psi

Modulus of Elasticity ASTM D4761 21,405 psi in center point loading of typical board 15,290 psi in center point loading of tongue/groove board

Modulus of Elasticity (Flexural Modulus) ASTM D198 29,815 psi in two point loading of typical board23,960 psi in two point loading of tongue/groove board

Coefficient of Linear Thermal Expansion ASTM D696 6.1 x 10 (in./in/ °C)

TECHNICAL SPECIFICATIONSMaterial Property Testing



DATE TEST BOARD

TIME IN TIME OUT

# OF THROWS

BROKEN TEMP (°F)

RESULT

7/7/09 1 11:00

7/8/09 8:15 3 Yes -110 Broke in half on third throw

7/7/09 4 11:00

7/8/09 8:15 5 Yes -110 Broke small piece off corner

7/8/09 2 11:25

7/9/09 9:21 5 No -90 Broke in half on fifth throw

7/8/09 4 11:25

7/9/09 9:21 5 No -90 No further damage

7/9/09 3 13:20

7/10/09 9:30 5 No -77 No damage

7/9/09 4 13:20

7/10/09 9:30 2 Yes -77 Block broke in half on second throw

3 14:00

11:00 No -60 No damage

4 14:00

7/7/09 11:00 1 Yes -60 This half piece broke on the first throw

TECHNICAL SPECIFICATIONSCold Temperature Testing



TO OUR VALUED CUSTOMERSA Rumber set back area offers many advantages over a traditional wood set back area. Rumber

is environmentally friendly, easy to install, extremely durable, and comes with a slip-resistant

traction surface. While Rumber is rigid and can be cut and drilled just like wood, it also lasts

5 times longer than a traditional wood surface and will not crack, splinter, or rot. This results

in less downtime for your rig. In the end, a Rumber set back area will help your company save

money, be safer, and perform better.

At Rumber, we pride ourselves on providing our customers with a great product and top

quality customer service. With that in mind, we want to update you on our product. A small

number of our customers have experienced a “bowing” effect when using Rumber in high-

temperature environments or if subjected prolonged chemical exposure from certain drilling

muds. We have had the Rumber material tested with many different drilling muds with no

reaction or “bowing.” Additionally, Rumber boards are in use on over 2,000 drilling rigs

worldwide with approximately 1% experiencing “bowing” effect. If you do experience this issue,

we recommend taking the following corrective actions:

• Trim ¼ to ½ of an inch from the end of each Rumber board in the set back area to allow for

expansion and contraction of the Rumber.

• Ensure the area below your set back area is clean, drained, and free from any accumulated

drilling mud.

• Screw down the center section of the Rumber board.

Consistency and performance are the reasons over 2,000 rigs around the world have counted

on Rumber for over 15 years. If you ever have any questions or have any issues with a Rumber

product, please do not hesitate to contact us directly at 1-877-RUMBER1 (1-877-2371) or info@

rumber.com.

We value your business and look forward to continue our services to you in the future.

Sincerely,

Brian Adams

Chief Executive Officer



MAIL

621 W. Division StreetMuenster, Texas 76252

PHONE (940) 759-41811-877-RUMBER1 (1-877-786-2371)

FAX(940) 759-4011

[email protected]

GET IN TOUCH


Documents

SET BACK AREA - Rumber Materials