Upload
abigayle-stevens
View
218
Download
2
Tags:
Embed Size (px)
Citation preview
Session IIIPersonal Protective Equipment
• Isolate students from hazardous materials
• EYES
• HANDS
• BODY
OSHA REGULATIONS
Teachers shall provide training to each student who is required by this section to use PPE. Each such student shall be trained to know at least the following:
A. When PPE is necessary
b. What PPE is necessary
c. How to properly don, doff, adjust, and wear PPE
d. The limitations of the PPE
e. The proper care, maintenance, useful life and
disposal of the PPE
OSHA REGULATION
The teacher shall assess the lab to determine if hazards are present, or are likely to be present, which necessitate the use of Personal Protective Equipment (PPE). If such hazards are present, or likely to be present, the teacher shall: select, and have each affected student use, the types of PPE that will protect the affected students from the hazards identified in the hazard assessment.
§ 115C-166. Eye protection devices required in certain courses
• The teacher shall ensure that each affected student uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.
• Defective and damaged equipment. Defective or damaged personal protective equipment shall not be used.
Eye Protection
29 CFR 1910.132
• Protective eye and face devices purchased after July 5, 1994 shall comply with ANSI Z87.1-1989, "American National Standard Practice for
Occupational Educational Eye and Face Protection.• Eye and face PPE shall be distinctly marked to facilitate identification of
the manufacturer.
• The teacher shall ensure that each affected student who wears prescription lenses while engaged in operations that involve eye hazards wears eye protection that incorporates the prescription in its design, or wears eye protection that can be worn over the prescription lenses without disturbing the proper position of the prescription lenses or the protective lenses.
Visitors to such shops and laboratories shall be furnished with and required to wear such eye safety devices while such programs are in progress. (1977 & 1981)
§ 115C-167. Visitors to wear eye safety devices
ANSI Z87.1
IMPACT - 1 inch steel ball dropped from height 40 to 50 inches
• Does not impair, shatter, split, break lens, frame of eyewear
• Requires appropriate eyewear for the task• Appropriate eyewear is standard established
by Professional organizations• Chemical Splash Goggles for any fluid• Safety Glasses (Impact)• UV Goggles• Visorgogs
Types of Eyewear
• Chemical Splash Goggles – for any fluid
• Safety Glasses – impact
• UV Goggles – can be either impact or splash
• Impact Safety Goggles - impact
• Visorgogs – impact
Eye and Face Protection
OSHA 29 CFR 1910.132 and 29 CFR 1910.133
Sterilization• UV Cabinet (12-15 minutes)• 70% isopropyl alcohol
SwabsWipes
• Elastic straps on some goggles – allow eggs of head lice to embed
• Use rubber straps
Contact Lens
1994 OSHA Reversed Ruling
Non-vented Chemical Splash Goggles
ACS Approved
NIOSH Approved
Hand Protection Required when there are hazards from skin absorption to
harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns and harmful temperature extremes.
• Neoprene - for sunlight, heat, organic solvents
• Aluminized - for hot or cold materials • Leather - for glass, bites, sharp objects, heat, cold
• Polyethylene - often disposable for solvents, acids, detergents Plastic
• latex - for general non-hazardous chemicals Nitrile for acids – organic solvents.
Clothing
• Open toed shoes and shoes with high heels are prohibited in the lab
• Short pants are prohibited in the lab
• Neck- ties should be removed when in the lab area.
• Loose jewelry is prohibited in the lab
• Long hair should be tied back
• A full length lab coat or a chemical- resistant apron is required when working with corrosive chemicals.
Some content for the slides in this section were produced by Linda Stroud, Science & Safety Consulting Services.
Session IIIEmergency Equipment
Eye Wash Stations
Drench Shower
First Aid Kit
Fire Extinguisher
Fire Blanket
Clean –up Kit
Emergency Equipment
• Must be strategically located throughout the lab
• Must be labeled
• Must be immediately available
• Must be in good working condition
• Each student must be instructed on its use
Eye Wash Station• Must be able to get to eyewash
within 10 seconds
• Must be able to supply a fresh supply of water for 15 minutes continuous
• Should be checked each week
• Eye wash area not to be used for anything else
Drench ShowerANSI Z 358-1-1990
• Shower area must be clear of electrical wiring
• The area around the shower must be kept clear
• Shower should be tested once each month when school is in session
• Shower drain must be clear of object that may impede water flow
• Must be labeled
First Aid Kit
• Must be mounted on the wall• Must be labeled• Available for immediate use
Should contain an adequate supply of:• Gauze compresses and bandages• Eye compress• PPE
• No meds, creams, ointments to be dispensed-When purchasing a commercially stocked kit, please remove these items.
Fire Extinguisher
• Must be mounted in a conspicuous location near the chemical store room
• Must be labeled
• Must be charged ( indicator points in green area)
• Must be checked each month ( tag signed and dated)
Fire Blanket• Must be constructed of wool and marked with
appropriate signage• Blanket should be in good condition no tears, holes• Should be checked each year and replaced as needed