SERVO T-BEAMCARBON FIBER FOR HIGH-SPEED TANDEM LINES

CARBON FIBER TECHNOLOGY

FEATURES• 70% lighter than steel and

25% lighter than aluminum, approximately

• Vibrational damping• Smaller dimensions• Interchangeable tooling

BENEFITS• Higher productivity and

flexibility• Reduced investment through

use of smaller robots and servo drives

• Decreased wear and tear of machine parts

Type Blanks Production Flexibility Needed

1 blank production Low flexibility

2 blank production Medium flexibility

3 blank production Medium flexibility

4 blank production High flexibility

RANGE OF PRODUCTIONThe carbon fiber T-beam is designed to offer tooling flexibility for high-speed tandem lines with varying production requirements.

OPEN CLOSED

BILSING T-BEAM MAXIMUM PAYLOAD

IMPROVED SPEEDThe servo T-beams offer the ability to accelerate/decelerate more quickly than other tooling materials, helping to improve production rates – all with a high degree of stability, accuracy and repeatability.

FASTER SETTLING TIMEThe high elastic stiffness of Bilsing’s CF beam significantly reduces vibration as experienced with aluminum and steel beams. This allows for a smaller press opening, helping to improve production rates by up to 20%.

4 5

+t +tAccelerationMax. Speed =

WITH Carbon

WITHOUT Carbon

De-Acceleration

1.E-05

8.E-06

6.E-06

4.E-06

2.E-06

0.E+000.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

-2.E-06

-4.E-06

-6.E-06

-8.E-06

-1.E-05

Disp

lace

men

t (m

m)

BILSING COMPOSITE CARBON FIBER STEEL ALUMINUM

Time (s)

Vibration Damping

+/- 155mm or 6"

40 Kg or 88 Lbs40 Kg or 88 Lbs

Weight load per side: Max. 40 Kg or 88 Lbs

(Tooling Recording/Frame + Tooling + Component)

+/- 155mm or 6"

EXAMPLE T-BEAM WITH TOOLING

Saddle frame for shift & ATC function

The T-beams are adaptable to all robot makes and compliance disconnect devices.

CFK parts

2x part individual tooling for manual change

© 2020 Bilsing Automation. All rights reserved. Produced by industry-scope.com

CORPORATE HEADQUARTERS

BILSING AUTOMATION GMBHDonnerwende 8D-57439 AttendornGermany

T +492 722 956 30F +492 722 956 333

info.de@bilsing-automation.com

NORTH AMERICAN SUBSIDIARY

BILSING AUTOMATION20220 Cornillie Drive Roseville, MI 48066USA

T +586 463 0686F +586 463 1003

info.na@bilsing-automation.com

ISO APPROVEDBilsing T-beams meet dimensional specification and requirements as set by automotive OEM Global Tooling Standards, but can be adapted to meet any robotic application.