Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
NEW PRODUCT
SPCS BENEFITS:
Our standard pinch valves are designed to be either fully opened or closed. For fluid applications that need proportional control, Bimba created a system that combines two of our technologies to create an easy all-in-one replaceable system. This Servo Pneumatically Controlled Pinch Valve System allows for quick and accurate adjustments of flow in flexible tubing. These two combined technologies allow for an adjustable control flow within the tube from 0 to 100% open capabilities.
• Dependable, compact and cost-effecive solution for immediate response
• Combines two Bimba technologies into a single system
• Provides a robust solution for accurate closed loop pneumatic control for precision fluid management
• System provides a quick, accurate adjustable controlled flow tube
• Flexible tubing sizes from 0.500" to 1.625" O.D.
System Features & Benefits
PINCH VALVE BENEFITS:
Servo Pneumatically Controlled Pinch Valve System
SPCS @ 100% Open
SPCS @ 30% Open
SPCS @ 60% Open
Flow Flow
Flow Flow
Flow Flow
• Designed for bio-pharma, bio-processing, food and bever-age and industrial applications where sterility and wash-down procedures are needed.
• Offer reliability and performance when working with hard or larger diameter tubing that requires stronger pinch forces.
• Specifically designed for disposable tubing • Each model contains an
easy snap-in tube slot for quick loading and unloading procedures
• Optional safety caps are available on certain mod-els to address operational hazards
• Integrated safety features standard on largest model (936)
• Compact Design• Operating Pressure: 0-125 psig (8.6 barg)• Positioning accuracy up to 1% of full stroke• Maximum Pinching Force (load): 100 lbs. (445 N) • Recommended for use with Bimba I Acro pneumatic
pinch valves (934, 935 or 936) bore sizes 1.50" through 2.375"
Bimba Manufacturing Company University Park, IL 60484 Telephone: +1 708.534.8544 Fax: +1 708.235.2014 Email: [email protected] www.bimba.com
WORLDWIDE DISTRIBUTION MEANS THERE IS A PROFESSIONAL STOCKING BIMBA DISTRIBUTOR NEARBY READY TO SERVICE YOUR NEEDS.
We Make Things Move®
VALVE MODEL
OPERATING PRESSURE RANGE
TUBE DIAMETERTUBE WALL THICKNESS
RECOMMENDED TUBING DUROMETER
MAXIMUM TESTED MEDIA PRESSURE
MAXIMUM PINCH FORCE
OFFERED MATERIALS
934 65 - 125 psig (4.5 - 8.6 Barg)0.500" - 0.750" (12.7 -19 mm)
0.063" - 0.125"* (1.60 - 3.2mm)
Up to 75 Shore A 50 psig** (3.5 Barg) 30 lbs (133 N)Aluminum and
Stainless Steel 316L
935 65 - 125 psig (4.5 - 8.6 Barg)0.750" - 1.000" (19 - 25.4 mm)
0.125" - 0.188"* (3.20 - 4.8 mm)
Up to 75 Shore A 50 psig** (3.5 Barg) 50 lbs (222 N)Aluminum and
Stainless Steel 316L
936 80 - 125 psig (5.5 - 8.6 Barg)1.000" - 1.625" (25.4 - 40 mm)
0.188"* (4.8 mm) Up to 75 Shore A 75 psig** (5.2 Barg) 100 lbs (445 N)Aluminum and
Stainless Steel 316L
Notes:*Other tubing wall thickness and diameters can potentially be used. Please contact factory with any questions.**Tube material dependent
Bimba Europe Aquamarijnstraat 97 7554 NN Hengelo, The Netherlands Telephone: +31.74.8200345 Email: [email protected] www.bimba.eu
MORE DETAILS (PINCH VALVES):
MORE DETAILS (SPCS SERVO PNEUMATIC CONTROLLER):
TYPICAL PROPORTIONAL PINCH VALVE MARKETS AND APPLICATIONS:
EASY SETUP AND CONNECTIONS• Standard Power: 24 VDC• I/O Command Signal: 0-10 VDC or 4-20 mA• Standard NPT plumbing connections for air lines• M8 connectors• IP65 compatible
SOFTWARE SETUP INCLUDING• Windows based user interface• Settings for gain, dampening and stroke position• Square wave generator to simulate performance
BIMBA IS AN ISO 9001 COMPANY.
• Biotechnology• Pharmaceuticals• Medical devices• Diagnostics• Food and beverage • Bioprocessing Single Use Technology• Filtration, TFF (Tangential Flow Filtration
• Bioreactors• Dispensing, Filling and Mixing: Resin, glue, epoxy, adhesive, paint, slurries and other media• Chromatography - Analyzers• Chemical Processing Equipment