Upload
ledung
View
225
Download
0
Embed Size (px)
Citation preview
www.targetcompletions.com918.893.5544
Service ToolsCompletion Equipment
Lateral Frac Completion Equipment
Operation:The tubing swivel allows surface connections to remain in place while the work string is rotated and moved vertically. It is primarily used in conjunction with the ‘SST’ to provide a means of operating the by-pass valve while the treating line is connected.
It can also be used to facilitate the operation of other Tryton packers, cementing or light drilling.
Characteristics:When using this swivel, it is strongly recommended that the treating line be secured to the Tubing Swivel with a suitable safety chain or cable.
Service ToolTubing Swivel
1700 N. IndianwoodBroken Arrow, Oklahoma 74012TargetCompletions.com
mmin73
2-7/888.93-1/2
daNLBS
44,500100,00060,000
135,000
mmin73
2-7/888.93-1/2
mmin
50.82
Tubing OD
Operating Load Rating
EUE Thread
Line Pipe Connection
Operation:PRODUCT 10-100
The By-Pass Valve is a rotational circulating valve designed for use with the SST or B-52 Selective Tools. This valve opens or closes off communication between the tubing and the annulus. The valve is used to bypass tubing fluid when running or retrieving Selective Tools, and if required can also be used for circulation of fluids.
The By-Pass Valve features a pressure balanced sleeve design which allows for easy operation of the valve under high differential pressures. Specially designed chemical and wear resistant seals ensure reliable and trouble free operation. Exclusive to this valve are the Thrust Bearings which allow for easy operation under tension or compression loads.
The By-Pass Valve is opened by rotating 3 turns to the right and closed by rotating 3 turns to the left.
1700 N. IndianwoodBroken Arrow, Oklahoma 74012TargetCompletions.com
Service ToolBy-Pass Valve
in4-1/2
55-1/26-5/8
78-5/89-5/8
in3.753.753.753.755.005.005.00
in1.931.931.931.932.442.442.44
in2-3/8 EUE2-3/8 EUE2-3/8 EUE2-3/8 EUE2-7/8 EUE2-7/8 EUE2-7/8 EUE
mm114.3127.0139.7168.3177.8219.1244.5
mm95.295.295.295.2
127.0127.0127.0
mm49.049.049.049.062.062.062.0
mm60.360.360.360.373.073.073.0
10-100-20010-100-20010-100-20010-100-20010-100-25010-100-25010-100-250
Casing OD By-Pass
Valve
ValveO.D.
ValveI.D.
ThreadConnection
Operation:The T613 H.D. Compression Squeeze Packer is used for high pressure production testing, squeeze cementing, acidizing and fracturing. The T613 H.D. Packer has anintegral bypass system that allows circulation around the tool to remove cement and debris from the well. The T613 H.D. Packer is used with the T725 TS-U Bridge Plug for multiple zone operation.
Characteristics:• Large internal bypass• Premium carbide slips and drag blocks• Hydraulic actuated hold down system• Full bore design• Available in several J-slot configurations, manual and auto
Service ToolT613 H.D. Compression Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012TargetCompletions.com
Operation:The T621 Tension Squeeze Packer is a full bore tension set squeeze packer that holds pressure from above and below. The T621 32A is used where sufficient tubing weight is not available to achieve pack off with compression set squeeze packers. The T621 32A is used for squeeze cementing operations, casing testing, formation fracturing and high pressure acidizing. The T621 32A is normally run with the T525 SC Unloader which allows circulation around the tool and equalizes tubing and annulus pressures during retrieving.
Characteristics:• Full bore design• Emergency rotational release system• Holds pressure from above and below• External J-slot design reduces debris build up• Durable construction
Service ToolT621 32A Tension Squeeze Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012TargetCompletions.com
Operation:The T525 SC Unloader is a tension set unloader usually run above the T260 32A Tension Squeeze Packer to equalize tubing and annulus pressure differentials. With the heavy duty collet the T525 Unloader can be left in the open position allowing fluid to pass while running, retrieving and preventing the packer elements from swabbing.
Characteristics: • Simple operation (tension to close-compression to open)• Full open bore• Heavy duty collet for repeated use• Permits full circulation around packer• Large bypass area
Service ToolT525 SC Unloader
1700 N. IndianwoodBroken Arrow, Oklahoma 74012TargetCompletions.com
in1-1/42-3/82-3/82-3/8
lbs/ft2.2503.2503.7504.500
in.750
1.6252.00
2.500
in1.660 EU 10RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-7/8 EUE 8RD
mm31.7560.360.373.0
kg/m57.1582.5595.25
114.30
mm19.0541.2850.8063.50
mm42.1660.3060.3073.00
T525-04A-000T525-06A-000T525-20A-000T525-25A-000
Tubing Size
MaxO.D.
MinI.D.
Thread Connection Product
Number
Operation:The T107 MC Valve is used with the T440 Casing Packer to cement liner strings into the well bore or open hole. The T440 Casing Packer is set in compression allowing the MC Valve to shear at a pre-determined valve, opening the cementing ports. The cementing ports are closed by picking up on the casing string.
Service ToolT107 M.C. Valve
1700 N. IndianwoodBroken Arrow, Oklahoma 74012TargetCompletions.com
in4-1/2 LTC5-1/2 LTC
in5.5006.500
in4.0005.000
in6” & UP6” & UP
mm114.3139.7
mm139.7165.1
mm101.6127
mm42.1660.30
T525-04A-000T525-06A-000
Casing Size
MaxO.D.
MinI.D.
HoleSize Product
Number
Operation:The T218 Pump-Out Cementing Sleeve is used for cementing liner strings in the well bore usually run above the T440 Casing Packer. The T218 Pump-Out Cementing Sleeve is run above the T440 Casing Packer, once the Casing Packer is set (tension or compression) the T218 is activated by gravitating a ball into the lower seat causing applied pressure shifts and opens port holes for cementing. After the cementing operating is completed pump the wiper plug into the upper seat and apply pressure to shift the closing sleeve over the port holes. Final pressure of 2500 PSI will pump out all internal parts of the T218 Pump-Out Cementing Sleeve.
Characteristics:• No drilling required• Short compact design• Meets tubing yield strength
Service ToolT218 Pump-Out Cement Sleeve
1700 N. IndianwoodBroken Arrow, Oklahoma 74012TargetCompletions.com
in2-3/82-7/83-1/24.0
4-1/25-1/2
in3.1253.7504.5004.6255.5006.500
in2.0002.5003.0003.4504.0005.000
in2-3/8 EU 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD
4.0 NU 8RD4-1/2 8RD CSG5-1/2 8RD CSG
mm60.373
88.9101.6114.3139.7
mm79.495.25114.3117.47139.7165.1
mm50.8063.5076.2087.70101.6127.0
mm60.373
88.9101.6114.3139.7
T218-20A-000T218-25A-000T218-35A-000T218-40A-000T218-45A-000T218-55A-000
Size MaxO.D.
Min I.D.@ Pump-Out
Thread Connection
Product Number
Operation:The model Omega-5 Bridge Plug is an economical, fully drillable bridge plug. For applications where 35mpa (5000psi) plug is sufficient. The D B-5 is suitable for well abandonments or zone suspension.
Characteristics:• Cost competitive• Constructed with drillable materials• 35 MPA (5000 psi) rated• Temperature rating 93 degrees celsius or 200 degrees fahrenheit• Runs on existing wireline setting tool or hydraulic setting tools
Service ToolOmega-5 Bridge Plug
1700 N. IndianwoodBroken Arrow, Oklahoma 74012TargetCompletions.com
in4-1/25-1/2
7
lbs/ft9.5-16.613-2317-35
in3.5004.3125.687
in3.8264.5806.000
in4.0905.0446.538
mm114.3139.7177.8
kg/m14.1-24.720.8-34.225.3-52
mm88.9
109.52144.45
mm97.18
116.33152.40
mm103.89128.12166.07
450DB5-00550DB5-00700DB5-00
Casing Size
Casing Weight
PlugO.D.
Setting Range
Min MaxProduct Number
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The model Omega-10 Bridge Plug is an economical, fully drillable bridge plug. For applications where a 70 mpa (10,000 psi) plug is sufficient. The DB-10 is suitable for well abandonments or zone suspension.
Characteristics:• Cost competitive• Constructed with drillable materials• Retaining rings assist in preventing element extrusion• Higher temperature of packing element available upon request• Sets in P-110 casing• 70 MPA (10,000 psi) rated• Temperature rating 150 degrees celsius or 300 degrees fahrenheit• Runs on existing wireline setting tool or hydraulic setting tools
Service ToolOmega-10 Bridge Plug
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Service ToolOmega-10 Specification Guide
in2-3/82-7/83-1/2
44-1/2
55-1/25-3/46-5/8
77-5/88-5/8
lbs/ft4-5/8
6.4-6.55.7-10.35.6-14
9.5-16.615.5-20.8
13-2314-25.217-3217-3520-39
24-49
in1.7502.2202.7503.1403.5623.9374.3124.6995.3755.6876.3127.125
in1.7802.3402.8673.3403.8264.1544.5804.8905.5956.0006.6257.310
in2.0742.5253.2583.7324.0904.5605.0445.2906.1356.5387.1258.097
lbs13,00013,00013,00020,00033,00033,00033,00033,00050,00050,00050,00050,000
mm60.373.088.9101.6114.3127
139.7146
168.3177.8193.7219.1
kg/m5.95-8.69.5-9.7
8.6-15.38.3-20.8
14.1-24.717.1-31
20.8-34.2 20.8-37.525.3-4825.3-5229.8-58
35.7-72.9
mm44.4556.3969.8579.7690.47100.00109.52119.35136.531
44.45160.321
80.98
mm52.6864.1482.7594.79
103.89115.82128.12134.37155.83166.07180.98205.66
daN5,7825,7825,7828,89614,67814,67814,67814,67822,24022,24022,24022,240
mm45.2159.4472.8284.8497.18
105.51116.33124.21142.11152.40168.20185.67
238DB10-00278DB10-00350DB10-00400DB10-00450DB10-00500DB10-00550DB10-00575DB10-00658DB10-00700DB10-00758DB10-00858DB10-00
Casing Size Casing Weight Plug O.D. Setting Range Setting Force Product
NumberMIN. MAX.
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The Omega BB Bridge Plug is an economical, fully drillable bridge plug and is suitable for well abandonments or zone suspension.
Characteristics:• Cost competitive• Constructed with drillable materials• Retaining rings to assist in preventing element extrusion• Higher temperature of packing element available upon request• Sets in P-110 casing• Temperature rating 150 degrees celsius or 300 degrees fahrenheit• Runs on existing wireline setting tool or hydraulic setting tools
Service ToolOmega Big Boy Bridge Plug
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Service ToolOmega Big Boy 9-5/8”-20” Bridge Plug
in9-5/810-3/411-3/411-3/413-3/8
1620
lbs/ft29.3-58.432.7-60.7
38-6060-83
48-84.565-11894-133
in8.1259.43710.4379.93711.88014.12518.730
in8.3799.660
10.77210.19212.125
18.730
in9.063
10.19211.15010.772
15.25019.124
lbs50,00050,00050,00050,00050,00050,00050,000
mm244.5269.9298.5298.5339.7406.4508.0
kg/m43.6-86.948.7-90.356.5-89.3
89.3-123.571.4-125.796.7-175.5139.8-197.8
mm206.38239.70265.10252.40301.75358.78475.74
mm230.20258.88283.21273.61
387.35485.75
daN22,24022,24022,24022,24022,24022,24022,240
mm212.83245.36273.61258.88307.98
475.74
958DB-81075DB-51175DB-41176DB-41338DB-3
1600DB-1.52000DB-1.5
Casing Size Casing Weight Plug O.D. Setting Range Setting Force Product
NumberMIN. MAX.
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The Omega H-2 Bridge Plug is designed to set with a combination of hydraulic pressure and mechanical pull. Used for temporary or permanent well abandonments and zone.
Characteristics:• Cost competitive• Constructed with drillable materials• Retaining rings to assist in preventing element extrusion• Higher temperature of packing element available upon request• Sets in P-110 casing• 70 mpa (10,000 psi) rated• Temperature rating 150 degrees celsius or 300 degrees fahrenheit• Right hand rotation to release work string
Service ToolOmega H-2 Bridge Plug
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in3-1/2
44-1/2
55-1/25-3/46-5/8
77-5/88-5/89-5/8
10-3/413-3/8
lbs/ft5.7-10.35.6-14
9.5-16.611.5-20.8
13-2314-25.217-3217-3520-3924-49
29.3-58.432.7-60.748-84.5
in2.7503.1903.5623.9374.3124.6995.3755.6876.3127.1258.1759.437
11.880
in2.8673.3403.8264.1544.5804.8905.5956.0006.6257.3108.3799.660
12.175
in3.2583.7324.0904.5605.0445.2906.1356.5387.1258.0979.06310.19212.715
lbs1,5001,5001,5001,5001,5001,5001,5001,5001,5001,5001,5001,5001,500
lbs10,00017,00028,00028,00028,00030,00045,00045,00045,00045,00045,00045,00045,000
lbs13,00020,00030,00030,00030,00033,00050,00050,00050,00050,00050,00050,00050,000
mm88.9
101.6114.3127
139.7146.1168.3177.8193.7219.1244.5273.1339.7
kg/m8.6-15.38.3-20.814.1-24.717.1-31.019.3-34.220.8-37.525.3-47.6 25.3-52.129.8-58.035.7-72.943.6-86.948.6-90.371.4-125.7
mm69.8581.0390.47100.0109.52119.35136.53144.45160.32180.98207.65239.70301.75
mm82.7594.79
103.89115.82128.12134.37155.83166.07180.98205.66230.20258.88322.96
daN10.310.310.310.310.310.310.310.310.310.310.310.310.3
DaN44487566
12,45412,45413.34420,01620,01620,01620,01620,01620,01620,01620,016
DaN57828896
13,34413,34413,34414,67822,24022,24022,24022,24022,24022,24022,240
mm72.8284.8497.18
105.51116.33124.21142.11152.40168.28185.67212.83245.36309.25
350HM2-10400HM2-10450HM2-10500HM2-10550HM2-10575HM2-10658HM2-10700HM2-10758HM2-10858HM2-10958HM2-81075HM2-51338HM2-3
Casing Size Casing Weight Plug O.D. Setting Range SurfacePressure
Minimum Pull Force
MaximumPull Force Product
NumberMIN. MAX.
Service ToolOmega H-2 Hydraulic Mechanical Bridge Plug Specification Guide
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The Omega CR Cement Retainer is an economical, fully drillable cement retainer. Easily converted from a wireline set to mechanical set with minimal changes. This provides the user with reliable high pressure plugging devices.
Application:The CR Cement Retainer is designed for deep, hot, high risk, prolonged or complicated squeeze cement jobs.
Characteristics:• Wireline or mechanical set - can be set with electrical pressure setting tool or mechanically on tubing.• Speed and safety - lock together design and extra clearance O.D.• Slide valve - controlled from surface by picking up work string to close and setting down to open.• Locked in squeeze pressure - the valve automatically closes when the stinger is removed locking in squeeze pressure while excess cement is circulated out.• Isolates hydrostatic pressure - the valve protects sensitive zone in low fluid level wells.• 70 mpa (10,000 psi) rated.
Service ToolOmega CR Cement Retainer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/2
55-1/25-3/46-5/8
77-5/88-5/89-5/810-3/411-3/410-3/413-3/8
31620
lbs/ft9.5-15.111.5-20.8
13-2314-25.217-3217-3528-3924-49
29.3-58.432.8-60.7
38-6060-83
48-80.765-11894-113
in3.9533.9374.3124.70005.3755.6886.3127.1258.1259.43710.4379.93711,87514.12518.375
in3.8264.1564.5804.8905.5956.0046.6257.5118.4359.66010.77210.19212.175
18.730
in4.0904.5605.0445.2906.1356.5387.1258.0979.06310.19211.15010.77212.71515.25019.124
mm114.3127
139.7146
168.3177.8193.7219.1244.5273
298.5298.5339.7406.4508
kg/m14.1-22.517.1-31.019.3-34.220.8-37.525.3-47.625.3-52.029.8-58.0 35.7-72.943.6-86.948.7-90.356.5-89.389.3-123.571.4-120.097.6-175.5139.8-197.8
mm91.26100
109.52119.38136.53144.48
160.32180.98206.38239.70265.10252.40301.63358.78466.73
mm103.89115.82128.12134.37155.83166.07180.98206.66230.20258.88283.21273.61322.96387.35485.75
mm97.18105.56116.33124.21142.11152.50168.28190.78214.25245.36273.61258.88309.25
475.74
Casing Size Casing Weight Retainer O.D. Setting RangeMIN. MAX.
Service ToolModel CR Cement Retainer Specification Guide
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The J-Latch is a positive latch for operating the sliding valve inside a cement retainer. This provides positive control of the sliding valve during stage cementing operations.
Characteristics:• Allows high pressure tube testing.• Multiple safety release (rotate and shear out).• Gives positive indication of stinger location.
Service ToolMechanical J-Latch Stinger
in4-1/25-1/2
7
in2-3/82-7/82-7/8
mm114.3139.7177.8
mm60.373.073.0
CasingSize
Tubing Size
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The Retainer Mechanical Setting Tool is designed to run and set the Polar Cement Retainers in tubing. In addition to the setting function the Retainer Mechanical Setting Tool will operate the retainer sleeve valve once the retainer is set.
Running the Mechanical Setting Tool/Retainer combination assembly at a moderate rate of speed while preventing right-hand rotation will transmit to the setting tool. It is recommended that the tubing be rotated left every 10 stands until positive resistance is felt.
When the desired setting depth has been reached pull the assembly two feet above thedesired setting point. Rotate the tubing to the right sufficiently to transmit 10 turns to the setting assembly.
Lower the setting assembly downward to the desired setting point. Proceed to pull the recommended tension above string weight, setting the slips and creating a pack off (as recommended in the setting chart below).
Slack off the equivalent amount of weight onto the assembly and again apply recommended tension. The retainer is now set and pressure testing may be performed. The setting tool may be released from the cement retainer by pulling 500 lbs. tension over the string weight and rotating the tubing 10 turns right. The setting tool may be relatched to the cement retainer by slacking off 1,000 lbs. string weight and snapped out by applying 5,000 lbs. tension. The snap out forces will decrease after repeated usage and will stabilize at 2,508 lbs.
The tension sleeve valve is opened with downward motion (compression) and closed withupward motion (tension). Two inches of travel from closed to open position.
Service ToolMechanical Setting Tool
in4-1/25-1/2
7
in2-3/82-7/82-7/8
mm114.3139.7177.8
mm60.373.073.0
CasingSize
Tubing Size
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The T401 SL Tension Packer is a dependable hook wall packer used for water injection and production. The open J-slot and large stainless steel drag springs make the T 401 SL ideal for setting in heavily corroded casing. The T401 SL has a right hand rotational safety release built into the top sub. This allows the tubing string to be removed from the packer when normal release procedures fail.
Characteristics:• Open J-slot reduces debri build up.• Safety tubing release.• Wide wicker slips insure setting in scaly casing.• Full opening design.• Automatic J-slot design for easy set and release.
Production ToolT401 SL Tension Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The T405 H Tension Packer was designed for use in old scaly casing or open hole applications. The T405 H Packers unique design features make it the packer of choice when producing or injecting in old pipe or open hole applications. The standard packer comes with deep wide wicker slips that allow penetration into scaly casing or open hole formations. The T405 H Packer has three releasing methods built into the design, virtually eliminating retrieval problems.
Characteristics:• Open J-slot reduces debris build up.• Safety tubing release.• Wide wicker slips insure setting in scaly casing.• Full opening design.• Automatic J-slot design for easy set and release.
Production ToolT405 H Tension Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in2-7/83-1/24.04.0
4-1/2 4-1/25.05.0
5-1/25-1/25-1/25-1/26.0
6-5/86-5/87.07.0
7-5/88-5/88-5/89-5/89-5/89-5/89-5/89-5/89-5/8
10-3/410-3/410-3/413-3/8
lbs/ft6.4-6.57.7-10.29.5-11.09.5-11.0
15.10-16.69.5-13.511.5-18.018-20.813-2020-2313-2020-2320-2320-2424-3217-2917-29
20-29.724-4020-24
32.3-43.543.5-53.532.3-43.543.5-53.532.3-43.543.5-53.532.7-55.532.7-55.532.7-55.5
48-72
in2.2503.7813.2503.2503.5003.7504.1254.0004.6254.5004.6254.5005.0005.7505.5006.0006.0006.6257.5007.8758.5008.2508.5008.2508.5008.2509.5009.5009.50012.000
in.7501.5001.5001.875
2.02.02.02.02.02.0
2.4372.4372.4372.4372.4372.4373.0002.4372.4372.4372.5002.5003.0003.0004.0004.0002.5003.0004.0004.000
in1,315 EUE 10RD1,900 EUE 10RD2,375 EUE 8RD2,375 EUE 8RD2,375 EUE 8RD2,375 EUE 8RD2,375 EUE 8RD2,375 EUE 8RD2,375 EUE 8RD2,375 EUE 8RD2,875 EUE 8RD2,875 EUE 8RD2,875 EUE 8RD2,875 EUE 8RD2,875 EUE 8RD2,875 EUE 8RD3-1/2 EUE 8RD2.875 EUE 8RD2.875 EUE 8RD2.875 EUE 8RD2.875 EUE 8RD2.875 EUE 8RD3-1/2 EUE 8RD3-1/2 EUE 8RD4-1/2 EUE 8RD4-1/2 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD4-1/2 EUE 8RD4-1/2 EUE 8RD
inT405-25A-000T405-35A-000T405-40A-000T405-41A-000T405-45B-000T405-45A-000T405-50A-000T405-50B-000T405-55A-000T405-55B-000T405-56A-000T405-56B-000T405-60B-000T405-65A-000T405-65B-000T405-70A-000T405-73A-000T405-75A-000T405-85A-000T405-85B-000T405-95A-000T405-95B-000T405-96A-000T405-96B-000T405-97A-000T405-97A-000T405-10A-000T405-101A-000T405-102A-000T405-13A-000
mm73.088.9
101.6101.6114.3114.3127127
139.7139.7139.7139.7152.4168.3168.3177.8177.8193.7219.1219.1244.5244.5244.5244.5244.5244.5273.1273.1273.1339.7
kg/m9.5-9.711.5-15
14.1-16.414.1-16.422.5-24.714.1-20.917.1-26.8 26.8-31.019.3-29.829.8-34.219.3-29.819.3-34.219.3-34.229.8-35.735.7-47.625.3-43.225.3-43.229.8-44.235.7-59.529.8-35.748.0-64.764.7-79.648.0-64.764.7-79.648.0-64.764.7-79.648.6-82.648.6-82.648.6-82.671.4-107
mm57.1596.082.5582.5588.995.25
104.78101.6117.4114.3117.4114.3127
146.1139.7152.4152.4168.3190.5200
215.9209.6215.9209.6215.9209.6241.3241.3241.3304.8
mm33.448.360.360.360.360.360.360.360.360.373.073.073.073.073.073.088.973.073.073.073.073.088.988.9114.3114.373.088.9114.3114.3
mm19.138.138.147.650.850.850.850.850.850.861.961.961.961.961.961.976.261.961.961.963.563.576.276.2101.6101.663.576.2101.6101.6
Casing Size Casing Weight Thread Connection Product NumberMin O.D.Max O.D.
Service ToolModel CR Cement Retainer Specification Guide
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The T436 C-1 Tandem Packer is a tension set zone isolation packer. The T436 C-1 Tandem Packers is normally run with the T603 ASI-X Double Grip Production Packer.
Setting: Unjayed Position: Apply tension shearing the brass shear screw energizing the packing element. Jayed Position: Set down weight shearing the brass shear screws, then rotate 1/8 right hand turn at packer and pull tension to energize the packing element.
Releasing: Set down weight to remove applied tension and engage the unloader to equalize pressures, then rotate 1/8 left hand turn at the packer to re-engage into running jay position.
Characteristics:• Full bore design.• Simple, economical packer for zone isolation.• Built in unloader.• Available in right or left hand J-slot configurations.
Production ToolT436 C-1 Tandem Tension Packer
in5-1/25-1/2
in13-2020-23
in2-3/8 EUE2-3/8 EUE
mm139.7139.7
mm19.3-29.829.8-34.2
mm60.360.3
in4.6254.500
mm117.4114.3
mm50.850.8
in2.0002.000
T436-55A-000T436-55B-000
Casing Size Casing Weight TubingSize
MaxO.D.
MinO.D. Product
Number
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The T437 S-1 Tandem Packer is used as an isolation packer in multiple completions.
Setting: Unjayed Position: Apply tension shearing the brass shear screw energizing the packing element. Jayed Position: Set down weight shearing the brass shear screws, then rotate 1/8 right hand turn at packer and pull tension to energize the packing element.Releasing: Set down weight to remove applied tension and engage the unloader to equalize pressures, then rotate 1/8 left hand turn at the packer to re-engage into running jay position.
Characteristics:• Full bore design• Simple, economical packer for zone isolation• Built in unloader• Available in right or left hand J-slot configurations
Production ToolT437 S-1 Tandem Tension Packer
in4-1/25.05.0
5-1/25-1/27.07.07.07.0
8-5/88-5/88-5/8
8-5/8
lbs/ft9.5-13.5
11.5-15
18-20.8
13-20
20-23
17-26
26-32
17-26
26-32
24-40
24-40
32.3-43.5
40-53.5
in2-3/8 EUE
2-3/8 EUE
2-3/8 EUE
2-3/8 EUE
2-3/8 EUE
2-7/8 EUE
2-7/8 EUE
3-1/2 EUE
3-1/2 EUE
2-7/8 EUE
3-1/2 EUE
3-1/2 EUE
3-1/2 EUE
mm114.3
127
127
139.7
139.7
177.8
177.8
177.8
177.8
219.1
219.1
244.5
244.5
kg/m14.1-20.1
17.1-22.3
26.8-31.0
19.3-29.8
29.8-34.2
25.3-38.7
38.7-47.6
25.3-38.7
38.7-37.6
35.7-59.5
35.7-59.5
48.1-64.7
59.5-79.6
mm60.3
60.3
60.3
60.3
60.3
73.0
73.0
88.9
88.9
73.0
88.9
88.9
88.9
mm95.25
104.78
101.6
117.4
114.3
152.4
149.2
152.4
149.2
190.5
190.5
215.9
209.6
mm50.8
50.8
50.8
50.8
50.8
63.5
63.5
76.2
76.2
63.5
76.2
76.2
76.2
in3.750
4.125
4.000
4.625
4.500
6.000
5.875
6.000
5.875
7.500
7.500
8.500
8.250
in2.000
2.000
2.000
2.000
2.000
2.500
2.500
3.000
3.000
2.500
3.000
3.000
3.000
T437-45A-000
T437-50A-000
T437-50A-000
T437-55A-000
T437-55A-000
T437-70A-000
T437-70A-000
T437-73A-000
T437-73A-000
T437-85A-000
T437-86A-000
T437-95A-000
T437-95A-000
Casing Size Casing Weight Tubing Size Max O.D. Min i.D. Product Number
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The T440 Casing Packer is an economical full bore tension or compression packer used for isolating bad areas of casing. The T440 Casing Packer is a versatile tool used for injection, producing and cementing in liner strings. The T440 Casing Packer comes with deep wicker slips and single or double cement system making this packer ideal for setting in scaly pipe or open hole formations. The T440 Casing Packer is available in either manual or automatic J-slot configurations and is also available with a right hand rotational safety release when run as a tension set tool.
Characteristics:• Full bore design.• Tension or compression set.• Available with rotational safety release system.• Available in single or double element design.• Economical.• Easily convertible into liner hanger system.
Production ToolT440 Casing Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/25.05.0
5-1/25-1/25-1/25-1/27.07.07.0
7-5/87-5/88-5/88-5/88-5/88-5/89-5/89-5/8
10-3/410-3/4
lbs/ft9.5-13.511.5-1518-20.813-2020-23
13-15.513-1717-3817-2917-23
20-33.720-33.724-4024-4024-4032 PPF
32.3-43.540-53.540-55.550-55.5
in3.7504.1254.0004.6254.5004.7814.6505.7505.9696.1876.6256.6257.507.507.507.6568.508.259.509.50
in2.502.502.503.03.03.503.504.04.55.04.05.04.05.05.506.506.506.506.507.0
in2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD3-1/2 EUE 8RD
4 NU 8RD4 NU 8RD
4-1/2 8RD CSG5.0 8RD CSG
5-1/2 8RD CSG4-1/2 8RD CSG5-1/2 8RD CSG4-1/2 8RD CSG5-1/2 8RD CSG6-5/8 8RD CSG7.0 8RD CSG7.0 8RD CSG7.0 8RD CSG7.0 8RD CSG7.0 8RD CSG
inT440-45A-000T440-50A-000T440-50B-000T440-55A-000T440-55B-000T440-56A-000T440-56B-000T440-70A-000T440-71B-000T440-72B-000T440-75A-000T440-76A-000T440-84A-000T440-85A-000T440-86A-000T440-87B-000T440-97A-000T440-97B-000T440-10A-000T440-101A-000
mm114.3127127
139.7139.7139.7139.7177.8177.8177.8193.7193.7219.1219.1219.1219.1244.5244.5273.1273.1
kg/m14.1-20.117.1-22.326.8-31.019.3-29.829.8-34.219.3-23.119.3-25.325.3-56.525.3-43.225.3-34.229.8-50.229.8-50.235.7-59.535.7-59.535.7-59.5
47.648.1-64.759.5-79.659.5-82.659.5-82.6
mm95.25104.8101.6117.4114.3121.4118.1146
151.6157.1168.3168.3190.5190.5190.5194.5215.9209.6241.3241.3
mm73.073.073.088.988.9
101.6101.6114.3127
139.7114.3139.7114.3139.7168.3177.8177.8177.8177.8177.8
mm63.563.563.576.276.288.988.9101.6114.3127
101.6127
101.6127
139.7165.1165.1165.1165.1177.8
Casing Size Casing Weight Tubing Size Product NumberMin O.D.Max O.D.
Production ToolT440 Casing Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The T441 Hanger Packer is a comprression set liner hanger packer for use in open hole or casing. The T441 WS Hanger uses deep and wide wicker slips that penetrate in scaly casing and open hole formations. The WS Hanger cone is shear pinned to eliminate premature setting of the packing element while running. Once the slips engage the cone the brass shear screws break energizing the packing element. The T441 WS Hanger Packer is run in using the WS Running Tool. The running tool comes with a two foot stroke allowing rotation at the hanger without picking up on the casing string, this allows the right hand break thread to rotate free and diconnect without damage.
Characteristics:• Simple operation.• Deep wide wicker slips.• Full opening.• Stainless stell slip arms and drag springs.• Available in stainless steel construction.
Production ToolT441 WS Hanger Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/25.05.0
5-1/25-1/25-1/25-1/27.07.07.0
7-5/87-5/8
8-5/8
8-5/8
8-5/8
8-5/8
9-5/8
9-5/8
9-5/8
9-5/8
10-3/4
10-3/4
lbs/ft9.5-13.511.5-1518-20.813-2020-23
13-15.513-1717-3817-2917-23
20-33.720-33.7
24-40
24-40
24-40
32 PPF
32.3-43.5
40-53.5
32.3-43.5
40-53.5
40-53.5
40-53.5
in3.7504.1254.0004.6254.5004.7814.6505.7505.9696.1876.6256.625
7.50
7.50
7.50
7.656
8.50
8.25
8.50
8.25
9.50
9.50
in2.502.502.503.03.03.503.504.04.55.04.05.0
4.0
5.0
5.50
6.50
6.0
6.0
6.50
6.50
6.50
7.0
in2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD3-1/2 EUE 8RD
4 NU 8RD4 NU 8RD
4-1/2 8RD CSG5.0 8RD CSG
5-1/2 8RD CSG4-1/2 8RD CSG5-1/2 8RD CSG
4-1/2 8RD CSG
5-1/2 8RD CSG
6-5/8 8RD CSG
7.0 8RD CSG
6-5/8 8RD CSG
6-5/8 8RD CSG
7.0 8RD CSG7.0 8RD CSG7.0 8RD CSG
7-5/8 8RD CSG
inT440-45A-000T440-50A-000T440-50B-000T440-55A-000T440-55B-000T440-56A-000T440-56B-000T440-70A-000T440-71B-000T440-72B-000T440-75A-000T440-76A-000
T440-84A-000
T440-85A-000
T440-86A-000
T440-87B-000
T440-94A-000
T440-94B-000
T440-97A-000
T440-97B-000
T405-10A-000
T405-101A-000
mm114.3127127
139.7139.7139.7139.7177.8177.8177.8193.7193.7
219.1
219.1
219.1
219.1
244.5
244.5
244.5
244.5
273.1
273.1
kg/m14.1-20.117.1-22.326.8-31.019.3-29.829.8-34.219.3-23.119.3-25.325.3-56.525.3-43.225.3-34.229.8-50.229.8-50.235.7-59.535.7-59.535.7-59.5
47.648.1-64.759.5-79.648.1-64.7
59.5-79.6
59.5-79.6
59.5-79.6
mm95.25104.8101.6117.4114.3121.4118.1146
151.6157.1168.3168.3
190.5
190.5
190.5
194.5
215.9
209.6
215.9
209.6
241.3
241.3
mm73.073.073.088.988.9
101.6101.6114.3127
139.7114.3139.7
114.3
139.7
168.3
177.8
168.3
168.3
177.8
177.8
177.8
193.7
mm63.563.563.576.276.288.988.9101.6114.3127
101.6127
101.6
127
139.7
165.1
152.4
152.4
165.1
165.1
165.1
177.8
Casing Size Casing Weight Tubing Size Product NumberMin I.D.Max O.D.
Production ToolT441 WS Hanger Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The T442 V.I.P. Packer is used in conjunction with the TEAM full bore Casing Packer. Together these tools create a unique packer system that are used to isolate bad areas of casing while allowing gas to vent from below. The V.I.P. Packer can be used in tension or compression, but is ideally suited for pumping wells with the tubing string landed in tension. The V.I.P. Packer is also designed with a double element system for setting in heavily corroded casing.
Characteristics:• Full bore design allows maximum tubing size.• Double element system insures sealing.• Torque mechanism allows manipulation of packer system.• Easily adjustable shear mechanism.• No O-ring seals.• Packing element design.
Production ToolT442 V.I.P. Gas Vent Packer System
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/25.05.0
5-1/25-1/25-1/25-1/27.0
lbs/ft9.5-13.511.5-1518-20.813-2020-23
13-15.517-2017-38
in3.7504.0004.1254.6254.5004.7814.6505.750
in2.02.02.02.02.02.502.502.50
in2-3/8 NU2-3/8 NU2-3/8 NU3-3/8 NU3-3/8 NU2-7/8 NU2-7/8 NU2-7/8 NU
in3” 8V LP3” 8V LP3” 8V LP3” 8V LP3” 8V LP
4” NU 8RD4” NU 8RD
4-1/2 8RD CSG
inT442-45A-000T442-50A-000T442-50B-000T442-55A-000T442-55B-000T442-56A-000T442-56B-000T442-70A-000
mm114.3127127
139.7139.7139.7139.7177.8
kg/m14.1-20.117.1-22.326.8-31.019.3-29.829.8-34.219.3-23.125.3-29.825.3-56.5
mm95.25101.6104.8117.4114.3121.4118.1146
mm73.073.073.088.988.9101.6101.6114.3
mm76.276.276.276.276.2101.6101.6114.3
mm50.850.850.850.850.863.563.563.5
Casing Size Casing Weight Tubing Size Liner Size Product NumberMin I.D.Max O.D.
Production ToolT442 V.I.P Gas Vent Packer System
Operation:The T444 CS Compression Packer is an inexpensive means of isolating the casing string from the open hole formation or it is used with the T444 Casing Packer for zone isolation. The T444 is set by applying sufficient weight to shear the setting screws energizing the packing elements.
Characteristics:• Large bore design.• Double element design for open hole formations.• Simple operation/ Economical.
Production ToolT444 CS Compression Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/25.05.0
5-1/25-1/25-1/25-1/27.07.07.0
7-5/87-5/8
8-5/8
8-5/88-5/88-5/89-5/89-5/8
10-3/410-3/4
lbs/ft9.5-13.511.5-1518-20.813-2020-23
13-15.513-1717-3817-2917-23
20-33.720-33.724-4024-4024-4032 PPF
32.3-43.540-55.540-55.540-55.5
in3.7504.1254.0004.6254.5004.7814.6505.7505.9696.1876.6256.6257.507.507.507.6568.508.259.509.50
in2.502.502.503.03.03.503.504.04.55.04.05.04.05.05.506.506.506.506.507.0
in2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD3-1/2 EUE 8RD
4 NU 8RD4 NU 8RD
4-1/2 8RD CSG5.0 8RD CSG
5-1/2 8RD CSG4-1/2 8RD CSG5-1/2 8RD CSG4-1/2 8RD CSG5-1/2 8RD CSG6-5/8 8RD CSG7.0 8RD CSG7.0 8RD CSG7.0 8RD CSG7.0 8RD CSG
7-5/8 8RD CSG
inT444-45A-000T444-50A-000T444-50B-000T444-55A-000T444-55B-000T444-56A-000T444-56B-000T444-70A-000T444-71B-000T444-72B-000T444-75A-000T444-76A-000T444-84A-000T444-85A-000T444-86A-000T444-87B-000T444-97A-000T444-97B-000T404-10A-000T404-101A-000
mm114.3127127
139.7139.7139.7139.7177.8177.8177.8193.7193.7219.1219.1219.1219.1244.5244.5273.1273.1
kg/m14.1-20.117.1-22.326.8-31.019.3-29.829.8-34.219.3-23.119.3-25.325.3-56.525.3-43.225.3-34.229.8-50.2
29.8-50.235.7-59.535.7-59.535.7-59.5
47.648.1-64.759.5-82.659.5-82.659.5-82.6
mm95.25104.8101.6117.4114.3121.4118.1146
151.6157.1168.3168.3190.5190.5190.5194.5215.9209.6241.3241.3
mm73.073.073.088.988.9
101.6101.6114.3127
139.7114.3139.7114.3139.7168.3177.8177.8177.8177.8193.7
mm63.563.563.576.276.288.988.9101.6114.3127
101.6127
101.6127
139.7165.1165.1165.1165.1177.8
Casing Size Casing Weight Tubing Size Product NumberMin I.D.Max O.D.
Production ToolT444 CS Compression Packer
Operation:The T654 HS-4 Isolation Packer is a hydraulic set, single string tandem packer used in multiple zone wells. The T654 HS-4 is used as the upper packer in multiple zone applications.
Setting: Run to setting depth and apply tubing pressure to set.
Characteristics:• Economical design.• Easily adjustable set and release shear screws.• Compact.
Production ToolT654 HS-4 Isolation Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/25.05.0
5-1/25-1/27.07.0
lbs/ft9.5-13.5 PPF
11.5-15 PPF
18-20 PPF
13-20 PPF
20-23 PPF
17-26 PPF
26-32 PPF
in2-3/8 EUE
2-3/8 EUE
2-3/8 EUE
2-3/8 EUE
2-3/8 EUE
2-7/8 EUE
2-7/8 EUE
mm114.3
127
127
139.7
139.7
177.8
177.8
kg/m14.1-20.1
17.1-22.3
26.8-31.0
19.3-29.8
29.8-34.2
25.3-38.7
38.7-47.6
mm60.3
60.3
60.3
60.3
60.3
73.0
73.0
mm95.25
104.78
101.6
117.4
114.3
152.4
149.2
mm50.8
50.8
50.8
50.8
50.8
63.5
63.5
in3.750
4.125
4.000
4.625
4.500
6.000
5.875
in2.000
2.000
2.000
2.000
2.000
2.500
2.500
T654-45A-000
T654-50A-000
T654-50B-000
T654-55A-000
T654-55B-000
T654-70B-000
T654-70A-000
Casing Size Casing Weight Tubing Size Max O.D. Min I.D. Product Number
Operation:The T641 Compression Isolation Packer is an economical means of isolating multiple zone wells. The T461 Packer is used as the upper packer in tandem string applications.
Characteristics:• Economical• Adjustable shear values• Resetable• Simple operation
Production ToolT641 Compression Isolation Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/25.0
5-1/25-1/27.07.07.0
7.09-5/8
in2-3/8
2-3/8
2-3/8
2-3/8
2-3/8
2-7/8
2-7/8
3-1/2
3-1/2
mm114.3
127
139.7
139.7
177.8
177.8
177.8
177.8
244.5
mm60.3
60.3
60.3
73.0
73.0
73.0
88.9
88.9
101.6
mm95.25
101.6
117.4
117.3
152.4
149.23
149.23
152.40
215.90
mm50.8
50.8
50.8
50.8
63.5
63.5
76.2
76.2
101.6
in3.750
4.000
4.625
4.625
6.000
5.875
5.875
6.000
8.500
in2.000
2.000
2.000
2.000
2.500
2.500
3.000
3.000
4.000
T641-45A-000
T641-50A-000
T641-55A-000
T641-56A-000
T641-70B-000
T641-70A-000
T641-73A-000
T641-73B-000
T641-97A-000
Casing Tubing Size Max O.D. Min I.D. Product Number
Operation:The T603 ASI-X is a single string double grip retrievable production packer that holds pressure from above and below. The ASI-X Packer is capable of being set in tension or compression and once set the tubing string can be left in tension, compression or neutral. Incorporated into the design is an internal bypass system that equalizes pressure before the upper slips are pulledfrom the casing wall. This system allows the ASI-X Packer to be used in a variety of downhole applications from prodution packer to retrievable bridge plug. The ASI-X Packer sets and releases to the right with one quarter at the packer.
Characteristics:• Tension or compression set.• Internal bypass to reduce swabbing.• 1/4 turn to set and release.• Tubing can be left in tension, compression or neutral.• Available in shear release.
Production ToolT603 ASI-X Production Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in2-7/83-1/24.0
4-1/24-1/24-1/24-1/24-1/25.05.0
5-1/25-1/2
5-1/2
5-1/25-1/2”5-1/2”5-1/2”
6”6-5/8”
7”
7”
7”7-5/8”7-5/8”8-5/8”9-5/8”9-5/8”10-3/4
lbs/ft6.4-6.5
9.2-10.29.5-11
15.1-16.69.5-13.5
13.5-15.19.5-13.5
13.5-15.111.5-1518-20.813-1414-2020-2313-14
13-15.515.5-2020-2314-2017-2017-2623-2926-32
24-29.733.7-3924-40
32.3-43.543.5-53.532.75-45.5
in2.2502.7813.2503.5943.7503.6563.7503.6564.1254.0004.8124.625
4.500
4.8124.7814.6254.5005.1885.7506.0005.9695.8756.6726.4537.5008.5008.2509.687
in.6251.2501.5001.5001.9381.9382.0002.0001.9381.9382.0002.000
2.0002.3752.3752.3752.3752.3752.5002.500
2.500
2.500
2.5002.5002.5004.0004.0004.000
in1.050 EUE 10RD1.900 NU 10RD1.900 EUE 10RD1.900 EUE 10RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD
2-3/8 EUE 8RD2-3/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD4-1/2 EUE 8RD4-1/2 EUE 8RD4-1/2 EUE 8RD
T603-25A-000T603-35A-000T603-40A-000T603-45C-000T603-45A-000T603-45B-000T603-46A-000T603-46B-000T603-50A-000T603-50B-000T603-55C-000T603-55A-000
T603-55B-000T603-56C-000T603-56D-000T603-56A-000T603-56B-000T603-60A-000T603-65A-000T603-70B-000T603-70C-000T603-70A-000T603-75A-000T603-75B-000T603-85A-000T603-95B-000
T603-95A-000
T603-10A-000
mm73.088.9
101.6114.3114.3114.3114.3114.3127127
139.7139.7
139.7
139.7139.7139.7139.7152.4168.3177.8177.8177.8193.7193.7219.1244.5244.5273.1
kg/m9.5-9.713.7-15
14.4-16.422.5-24.7
14.14-20.120.1-22.5
14.14-20.120.1-22.517.1-22.326.8-31.019.3-20.8
20.8-29.8
29.8-34.2
19.3-20.819.3-23.123.1-29.829.8-34.220.8-29.825.3-29.825.3-38.734.2-43.238.7-47.635.7-44.250.2-58.035.7-59.548.1-64.759.5-79.648.6-67.9
mm57.1570.6282.5591.2995.2592.8695.2592.86
104.78101.60122.22117.48
114.30122.22121.44117.48114.30131.78146.10
152.40
151.61
149.23169.47163.91190.50215.90209.60246.05
mm26.6748.348.348.360.360.360.360.360.360.360.360.3
60.373.073.073.073.073.073.073.073.073.073.073.073.0114.3114.3114.3
mm15.8831.7538.1038.1049.2349.2350.8050.8049.2349.2350.8050.80
50.8060.3060.3060.3060.3060.3063.5063.5063.5063.5063.5063.5063.50101.60101.60101.60
Casing Size Casing Weight Thread Connection Product Number
Min I.D.Max O.D.
Production ToolT603 ASI-X Production Packer
Operation:The T601 ASI-XW Packer is a double grip wireline set tubing retrievable packer. The design allows the packer to be used as a wireline set tubing retrievable packer using the standard T-2 on/off tool disconnect as the seal assembly and retrieving tool. This packer configuration allows for less equipment and tubing trips over conventional wireline set seal bore production packers, with the added benefit of converting the tool to turning set version if desired. When run with the ASI-XW MX Wireline Adapter Kit a blanking plug can be run in place above the tool in the on/off disconnect profile stinger converting the tool to a temporary bridge plug.
Characteristics:• Wireline or tubing set.• Sequential release upper slip system.• Bypass valve opens before upper slips are released.• Eliminated expensive seal assemblies.• 1/4 turn to set 1/4 turn to release.• Available in shear release.
Production ToolT601 ASI-XW Wireline Set Production Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4.0
4-1/24-1/24-1/24-1/24-1/24-1/25.05.0
5-1/25-1/2
5-1/2
5-1/25-1/25-1/25-1/26.0
6-5/87.0
7.0
7.07.07.0
7-5/87-5/88-5/8
lbs/ft9.5-11
9.5-13.59.5-13.59.5-15.1
13.5-15.115.1-16.615.1-2011.5-1518-20.813-1414-2020-2313-14
13-15.515.5-2020-2314-2017-2017-2623-2926-3217-2626-32
24-29.733-3924-40
in3.2503.7503.7503.6563.6563.5943.5004.1254.0004.8124.6254.500
4.812
4.7814.6254.5005.1885.7506.0005.9695.8756.0005.8756.6726.4537.500
in1.5001.9382.0002.0001.9381.5001.7031.9381.9382.0002.0002.000
2.375
2.3752.3752.3752.3752.5002.5002.500
2.500
3.000
3.0002.5002.5002.500
in1.900 EUE 10RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD
1,900 EUE 10RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD
2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD3-1/2 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD
T601-40A-000T601-45A-000T601-46A-000T601-46B-000T601-45B-000T601-45D-000T601-45C-000T601-50A-000T601-50B-000T601-55C-000T601-55A-000T601-55B-000
T601-56C-000T601-56D-000T601-56A-000T601-56B-000T601-60A-000T601-65A-000T601-70A-000T601-70B-000T601-70C-000T601-73B-000T601-73A-000T601-75A-000T601-75B-000T601-85A-000
mm101.6114.3114.3114.3114.3114.3139.7168.3139.7139.7
152.4
177.8177.8177.8177.8177.8193.7193.7219.1114.3127127
139.7139.7139.7139.7
kg/m14.1-16.414.1-20.914.1-20.914.1-22.520.9-22.522.5-24.722.5-29.817.1-22.326.8-31.019.3-20.820.8-29.8
29.8-34.2
19.3-20.8
19.3-23.1
23.1-29.829.8-34.220.8-29.825.3-29.825.3-38.734.2-43.238.7-47.625.3-38.738.7-47.635.7-44.249.1-58.035.7-59.5
mm82.5595.2595.2592.8692.8691.2988.90
104.78101.60122.22117.48114.30122.22
121.44117.48114.30131.78146.10152.40151.61
149.23
152.40
149.23
169.47
163.91190.50
mm26.6748.348.348.360.360.360.360.360.360.360.360.3
60.373.073.073.073.073.073.073.073.073.073.073.073.0114.3
mm38.1049.2350.8050.8049.2338.1043.2649.2349.2350.8050.8050.80
60.3060.3060.3060.3060.3063.5063.5063.5063.5076.2076.2063.5063.5063.50
Casing Size Casing Weight Thread Connection Product Number
Min I.D.Max O.D.
Production ToolT601 ASI-XW Wireline Set Production Packer
Operation:The T603 ASI-X HP is a Single Sting Double Grip Retrievable Production Packer that holds pressure from above and below. The HP version of the ASI-X Packer is capable of being set in tension or compression and once set the tubing string can be left in tension, compression or neutral. Incorporated into the design is an internal bypass system that equalizes pressure before the upper slips are pulled from the casing wall. This system allows the ASI-X Packer to be used in a variety of downhole applications from production packer to retrievable bridge plug.
Characteristics:• Tension or compression set.• Internal bypass to reduce swabbing.• 1/4 turn to set and release.• Tubing can be left in tension, compression or neutral.• Available in shear release.
Production ToolT603 ASI-X HP Production Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/24-1/24-1/24-1/24-1/25.05.0
5-1/25-1/25-1/25-1/2
5-1/2
5-1/25-1/26.0
6-5/87.07.07.0
7-5/8
7-5/8
8-5/88-5/89-5/89-5/8
lbs/ft15.1-16.69.5-13.5
13.5-15.19.5-13.5
13.5-15.111.5-1518-20.813-1414-2020-2313-14
13-15.515.5-2020-2314-2017-2014-2623-2926-32
24-29.733.7-3928-4024-40
32.3-43.543.5-53.5
in3.5943.7503.6563.7503.6564.1254.0004.8124.6254.5004.8124.781
4.625
4.5005.1885.7506.0005.9695.8756.6726.4537.5007.5008.5008.250
in1.5001.9381.9382.0002.0001.9381.9382.0002.0002.0002.3752.375
2.375
2.3752.3752.5002.5002.5002.5002.500
2.500
2.5003.0004.0004.000
in1.900 EUE 10RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD
2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD4-1/2 EUE 8RD4-1/2 EUE 8RD
T603-45D-000T603-45A-000T603-45B-000T603-46A-000T603-46B-000T603-50A-000T603-50B-000T603-55C-000T603-55A-000T603-55B-000T603-56C-000T603-56D-000
T603-56A-000T603-56B-000T603-60A-000T603-65A-000T603-70B-000T603-70C-000T603-70A-000T603-75B-000T603-75A-000T603-85A-000
T603-86A-000
T603-95B-000
T603-95A-000
mm114.3114.3114.3114.3114.3127127
139.7139.7139.7
139.7
139.7139.7139.7152.4168.3177.8177.8177.8193.7193.7219.1219.1244.5244.5
kg/m22.5-24.7
14.14-20.120.1-22.5
14.14-20.120.1-22.517.1-22.326.8-31.019.3-20.820.8-29.829.8-34.219.3-20.8
19.3-23.1
23.1-29.8
29.8-34.2
20.8-29.825.3-29.825.3-38.734.2-43.238.7-47.635.7-44.250.2-58.041.7-59.535.7-59.548.1-64.759.5-79.6
mm91.2995.2592.8695.2592.86
104.78101.60122.22117.48114.30122.22121.44117.48
114.30131.78146.10152.40151.61149.23169.47
163.91
190.50
190.50
215.90
209.60
mm26.6748.348.348.360.360.360.360.360.360.360.360.3
60.373.073.073.073.073.073.073.073.073.073.073.073.0
mm38.1049.2349.2350.8050.8049.2349.2350.8050.8050.8060.3060.30
60.3060.3060.3063.5063.5063.5063.5063.5063.5063.5076.20101.60101.60
Casing Size Casing Weight Thread Connection Product Number
Min I.D.Max O.D.
Production ToolT603 ASI-X HP Production Packer
Operation:The T601 ASI-XW HP Packer is a high pressure double grip wireline set tubing retrievable packer. The ASI-XW HP has all the features of the popular ASI-XW Packer, but was modified to handle high pressure production and stimulation operations.
Setting: Wireline Set on appropriate setting device.Release: Set down weight and turn one quarter turn at packer, pick up the tubing string while holding right hand torque opening the equalizing bypass system and further upward movement will engage the sequential release slip system pulling the slips from the casing wall and relaxing the packing elements.
Characteristics:• Wireline or tubing set.• Sequential release upper slip system.• Bypass valve opens before upper slips are released.• Elimates expensive seal assemblies.• 1/4 turn to set, 1/4 turn to release.• Available in shear release.
Production ToolT601 ASI-XW HP Wireline Set Production Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4.0
4-1/24-1/24-1/24-1/25.05.0
5-1/25-1/2
5-1/2
5-1/25-1/25-1/25-1/26.0
6-5/87.0
7.0
7.07-5/87-5/88-5/89-5/89-5/8
lbs/ft9.5-11
9.5-13.513.5-15.115.1-16.6 15.1-2011.5-1518-20.813-1414-2020-2313-14
13-15.515.5-2020-23 14-2017-2017-2623-2926-32
24-29.733.7-3924-40
32.3-43.540-53.5
in3.2503.7503.6563.5943.5004.1254.0004.8124.6254.500
4.812
4.7814.6254.5005.1885.7506.0005.9695.8756.6726.4537.5008.5008.250
in1.5001.9381.9381.5001.7031.9381.9382.0002.0002.000
2.375
2.3752.3752.3752.3752.5002.5002.500
2.500
2.500
2.5002.5004.0004.000
in1.900 EUE 10RD2-3/8 EUE 8RD2-3/8 EUE 8RD
1,900 EUE 10RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD
2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD
2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD4-1/2 EUE 8RD4-1/2 EUE 8RD
T601-40A-000T601-45A-000T601-45B-000T601-45D-000T601-45C-000T601-50A-000T601-50B-000T601-55C-000T601-55A-000T601-55B-000
T601-56C-000T601-56D-000T601-56A-000T601-56B-000T601-60A-000T601-65A-000T601-70A-000T601-70B-000T601-70C-000T601-75A-000T601-75B-000T601-85A-000T601-95B-000T601-95A-000
mm101.6114.3114.3114.3114.3127127
139.7139.7139.7
139.7
139.7139.7139.7152.4168.3177.8177.8177.8193.7193.7219.1244.5244.5
kg/m14.1-16.414.1-20.120.1-22.522.5-24.722.5-29.817.1-22.326.8-31.019.3-20.820.8-29.829.8--34.219.3-20.8
19.3-23.1
23.1-29.8
29.8-34.2
20.8-29.825.3-29.825.3-38.734.2-43.238.7-47.6
35.7-44.2
50.2-58.0
35.7-59.5
48.1-64.7
59.5-79.6
mm82.5595.2592.8691.2988.90
104.78101.60122.22117.48114.30122.22
121.44117.48114.30131.78146.10152.40
151.61
149.23
169.47
163.91
190.50
215.90209.60
mm26.6748.348.348.360.360.360.360.360.360.360.360.3
60.373.073.073.073.073.073.073.073.073.073.073.0
mm38.1049.2349.2338.1043.2649.2349.2350.8050.8050.80
60.3060.3060.3060.3060.3063.5063.5063.5063.5063.5063.5063.50101.60101.60
Casing Size Casing Weight Thread Connection Product Number
Min I.D.Max O.D.
Production ToolT601 ASI-XW HP Wireline Set Production Packer
Operation:The TS-3 Single Grip Packer is a single-grip, compression-set, retrievable mechanical production packer that is suitable for most production, stimulation and testing operations. The field proven large bore design allows unrestricted fluid flow and wireline operations though the tubing. The TS-3 also incorporates an internal bypass to prevent swabbing when running and retrieving.
Characteristics:• Normal RH compression set, straight pick-up release.• Optional J-slot configurations.• Large bypass for running, retrieving and equalizing.• Available with both long and short stroke mandrels.
Production ToolT631 TS-3 Single Grip Compression Set Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4 1/24 1/25.05.0
5 1/25 1/25 1/25 1/25 1/27.0
7.0
lbs/ft15.1-16.6
9.5-13.5
18.0-20.8
11.5-15.0
20.0-23.0
13.0-20.0
20.0-23.0
15.5-20.0
13.0-14.0
17.0-26.0
26.0-35.0
mm114.3
114.3
127.0
127.0
139.7
139.7
139.7
139.7
139.7
177.8
177.8
kg/m22.3-24.6
14.1-20.1
26.82-13.9
17.1-22.3
29.8-34.2
19.4-29.8
29.8-34.2
23.1-29.8
19.2-20.8
25.3-38.7
38.7-51.8
mm91.29
95.25
101.60
104.78
114.30
117.48
114.30
117.48
121.44
152.40
149.23
mm60.3
60.3
60.3
60.3
60.3
60.3
73.0
73.0
73.0
73.0
73.0
in3.594
3.750
4.000
4.125
4.500
4.625
4.500
4.625
4.781
6.000
5.875
in2 3/8 EUE2 3/8 EUE2 3/8 EUE2 3/8 EUE2 3/8 EUE2 3/8 EUE2 7/8 EUE
2 7/8 EUE
2 7/8 EUE
2 7/8 EUE
2 7/8 EUE
Casing Size Casing Weight O.D. Of Tool Thread Connections
Operation:The T636 Snapset II Compression Set Single String Isolation Packer is used in multi-zone completions. The Snapset II Packer is also used where high differential pressures above the packer are not expected. The Snapset II sets in compression with a lower anchor style packer below. They collect in the lower end of the tool shifts at a pre-determined value to energize the packing elements and set the upper slips. To release, straight pick-up on the tubing string is required.
Characteristics:• Compensating piston hold down system.• Runnning bypass.• Equalizing system.• Keyed for rotation through packer.• Internal collet to prevent pre-set.• Three element packing system.• Sequential release slip system.
Production ToolT636 Snapset II Compression Set Isolation Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in2-7/84.0
4-1/24-1/24-1/25.05.0
5-1/25-1/2
5-1/2
5-1/25-1/25-1/25-1/26.0
6-5/87.07.07.0
7-5/87-5/88-5/8
lbs/ft6.4-6.59.5-11
15.1-16.69.5-13.5
13.5-15.111.5-1518-20.813-1414-2020-2313-14
13-15.515.5-2020-23 14-2017-2017-2623-2926-32
24-29.733.7-3924-40
in2.2503.2503.5943.7503.6564.1254.0004.8124.6254.500
4.812
4.7814.6254.5005.1885.7506.0005.9695.8756.6726.4537.500
in.6251.5001.5001.9381.9381.9381.9382.0002.0002.000
2.375
2.3752.3752.3752.3752.5002.5002.5002.5002.5002.5002.500
in1.050 EUE 10RD1.900 EUE 10RD1.900 EUE 10RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD
2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD
2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD
T636-25A-000T636-40A-000T636-45C-000T636-45A-000T636-45B-000T636-50A-000T636-50B-000T636-55C-000T636-55A-000T636-55B-000
T636-56C-000T636-56D-000T636-56A-000T636-56B-000T636-60A-000T636-65A-000T636-70B-000T636-70C-000T636-70A-000T636-75A-000T636-75B-000T636-85A-000
mm73.0
101.6114.3114.3114.3127127
139.7139.7139.7
139.7
139.7139.7139.7152.4168.3177.8177.8177.8193.7193.7219.1
kg/m9.5-9.7
14.14-16.422.5-24.7
14.14-20.120.1-22.517.1-22.326.8-31.019.3-20.820.8-29.829.8-34.219.3-20.8
19.3-23.1
23.1-29.8
29.8-34.2
20.8-29.825.3-29.825.3-38.734.2-43.238.7-47.635.7-44.250.2-58.035.7-59.5
mm57.1582.5591.2995.2592.86
104.78101.60122.22117.48114.30122.22
121.44117.48114.30131.78146.10152.40
151.61
149.23
169.47
163.91
190.50
mm26.6748.348.360.360.360.360.360.360.360.373.073.0
73.073.073.073.073.073.073.073.0
73.0
73.0
mm15.8838.1038.1049.2349.2349.2349.2350.8050.8050.80
60.3060.3060.3060.3060.3063.5063.5063.5063.5063.5063.5063.50
Casing Size Casing Weight Thread Connection Product Number
Min I.D.Max O.D.
Production ToolT636 Snapset II Compression Set Isolation Packer
Operation:The T628 AS-5 Anchor Packer is the upper packer in a zone isolation completion. The packer was designed to run above the AS-6 Compression Packer. The AS-5 Packer sets by applying weight which closes the bypass seal and energizes the packing elements. Once set the AS-5 can be locked in place allowing the tubing string to be removed using the T-2 on/off tool. The AS-5 sets and releases with one quarter turn right hand rotation at the packer.
Characteristics:• Allows tubing disconnect in straddle completions.• Sequential release slip system.• Large bypass area.• Equalizing bypass system opens before upper slips are released.
Production ToolT628 AS-5 Anchor Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/25.05.0
5-1/25-1/25-1/25-1/27.07.0
7-5/88-5/8
lbs/ft9.5-13.5 11.5-1518-20.813-2020-23
15.5-2020-23 17-2626-32
24-29.724-40
in3.7504.1254.0004.6254.5004.6254.5006.0005.8756.6727.500
in2.0002.0002.0002.0002.0002.3752.3752.5002.5003.0002.500
in2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD
2-7/8 EUE 8RD
T628-45A-000T628-50A-000T628-50B-000T628-55A-000T628-55B-000T628-56A-000T628-56B-000T628-70B-000T628-70A-000T628-76A-000T628-85A-000
mm114.3127127
139.7139.7139.7139.7177.8177.8193.7219.1
kg/m14.1-20.917.1-22.326.8-31.019.3-29.829.8-34.223.1-29.829.8-34.225.3-38.738.7-47.635.7-44.235.7-59.5
mm95.25
104.78101.60117.48114.30117.48114.30152.40149.23169.47190.50
mm60.360.360.360.360.373.073.073.073.088.973.0
mm50.8050.8050.8050.8050.8060.3060.3063.5063.5076.2063.50
Casing Size Casing Weight Thread Connection Product Number
Min I.D.Max O.D.
Production ToolT628 AS-5 Anchor Packer
Operation:The T629 AS-6 Single Grip Compression Packer was specifically designed as the lower packer in a zone isolation completion. It is run with the AS-5 anchor packer positioned above which creates a system that will set with compression, but allows the tubing string to be removed from the upper packer using the T-2 on/off tool. The extended stroke seal area of the AS-6 allows for tubing movement or pressure changes between the two packers while maintaining a seal. The AS-6 Packer is available in right and left hand automatic or manual j-slot configurations. The AS-6 Packer can also be used as a single grip production packer in completions where low differential pressures forming below the packer is expected.
Characteristics:• Extended stroke seal area.• Large bypass area.• Uses common replacement parts.
Production ToolT629 AS-6 Single Grip Compression Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in4-1/25.05.0
5-1/25-1/25-1/25-1/27.07.0
8-5/8
lbs/ft9.5-13.5 11.5-1518-20.814-2020-23
15.5-2020-23 17-2626-3224-40
in3.7504.1254.0004.6254.5004.6254.5006.0005.8757.500
in2.0002.0002.0002.0002.0002.3752.3752.5002.5002.500
in2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-3/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD2-7/8 EUE 8RD
2-7/8 EUE 8RD
T629-45A-000T629-50A-000T629-50B-000T629-55A-000T629-55B-000T629-56A-000T629-56B-000T629-70B-000T629-70A-000T629-85A-000
mm114.3127127
139.7139.7139.7139.7177.8177.8219.1
kg/m14.1-20.917.1-22.326.8-31.020.8-29.829.8-34.223.1-29.829.8-34.225.3-38.738.7-47.635.7-59.5
mm95.25
104.78101.60117.48114.30117.48114.30152.40149.23190.50
mm60.360.360.360.360.373.073.073.073.073.0
mm50.8050.8050.8050.8050.8060.3060.3063.5063.5063.50
Casing Size Casing Weight Thread Connection Product Number
Min I.D.Max O.D.
Production ToolT629 AS-6 Single Grip Compression Packer
Operation:The T512 T-2 On/Off Overshot was designed to disconnect and connect the tubing string from a doublegrip production packer that does not require tension or compression to maintain a pack-off. The T-512 T-2 On/Off Tool applications consist of treating, fracing, testing and production applications. The profile stingers that run with the overshot are available in a variety of profiles sizes and materials.
Characteristics:• Proven bonded seal system.• Built for strength and durability.• Variety of profile nipples.• Available in special metallurgy.• Available shear pinned up or down position.• Available in spring loaded design.
Production ToolT512 T-2 On/Off Overshot
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in2-7/8 3-1/2
4.04-1/2-54-1/2-5
5-1/2-6-5/85-1/2-6-5/8
7-7-5/87-7-5/88-5/88-5/89-5/89-5/810-3/410-3/4
lbs/ft2.2502.7503.2503.7503.7504.5004.5005.7505.7506.5006.5007.5007.5008.5008.500
in1.0001.5001.5002.0002.3752.0002.5002.5003.0002.5004.0002.5004.0002.5004.000
in1.660 EUE1.660 EUE1.660 EUE1.660 EUE1.660 EUE1.660 EUE1.660 EUE1.660 EUE1.660 EUE
1.660 EUE1.660 EUE1.660 EUE1.660 EUE1.660 EUE1.660 EUE
T512-25A-000T512-35A-000T512-40A-000T512-45A-000T512-46B-000T512-55A-000T512-56A-000T512-70A-000T512-73A-000T512-85A-000T512-86A-000T512-95A-000T512-96A-000T512-10A-000T512-11A-000
mm73.088.9101.6
114.3-127114.3-127
139.7-168.3139.7-168.3177.8-193.7177.8-193.7
219.1219.1244.5244.5273.1273.1
kg/m57.1569.8582.5595.2595.25114.3114.3146146
165.1165.1190.5190.5215.9215.9
mm40.248.348.360.373.060.373.073.088.973.0
114.373.0
114.373.0
114.3
mm25.438.138.150.860.350.863.563.576.263.5
101.663.5
101.663.5
101.6
Casing Size Thread Connection Product
NumberMin I.D.Max O.D.
Operation:The T510 T-2 On/Off Toolstingers are used to disconnect the tubing string from a packer. The stingers are used with the T512 T-2 Overshot and are available in a variety of profile types, sizes and from a broad range of material types.
Production ToolT510 T-2 On/Off Toolstinger
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
Operation:The T568 Rotational Safety Joint provides for emergency release of the tubing string. The RH Rotational Safety Joint uses larger square left-hand threads to seperate the upper and lower subs with right-hand rotation abandoning any production equipment below.
Production ToolT568 RH Rotational Safety Joint
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in1.660 1.9002-3/82-7/83-1/2
lbs/ft2.2202.5003.0623.6884.500
in1.3751.5002.0002.5003.000
in1.660 EUE 10RD1.900 EUE 10RD2-3/8 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD
T568-16A-000T568-19A-000T568-20A-000T568-25A-000T568-35A-000
mm42.248.360.373.088.9
kg/m56.463.577.893.7
114.3
mm42.248.360.373.088.9
mm34.938.150.863.576.2
Tubing Size Thread Connection Product
NumberMin I.D.Max O.D.
Operation:The T569 Shear Safety Joint provides for emergeny release of the tubing string. Straight pull seperates the tool at a predetermined shear value.
Production ToolT569 Shear Safety Joint
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in1.660 1.9002-3/82-7/83-1/2
lbs/ft2.2202.5003.0623.6884.500
in1.3751.5002.0002.5003.000
in1.660 EUE 10RD1.900 EUE 10RD2-3/8 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD
T569-16A-000T569-19A-000T569-20A-000T569-25A-000T569-35A-000
mm42.248.360.373.088.9
kg/m56.463.577.893.7
114.3
mm42.248.360.373.088.9
mm34.938.150.863.576.2
Tubing Size Thread Connection Product
NumberMin I.D.Max O.D.
Operation:The T569 Model “K” Shear Safety Joint provides for emergency release of the tubing string. Straight pull seperates the tool at a predetermined shear value. The T569 Model “K” Shear Safety Joint allows torque to be transmitted through the tool wihtout affecting the shear screws.
Production ToolT569 Model “K” Shear Safety Joint
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in1.660 1.9002-3/82-7/83-1/2
lbs/ft2.2202.5003.0623.6884.500
in1.3751.5002.0002.5003.000
in1.660 EUE 10RD1.900 EUE 10RD2-3/8 EUE 8RD2-7/8 EUE 8RD3-1/2 EUE 8RD
T569-16A-000T569-19A-000T569-20A-000T569-25A-000T569-35A-000
mm42.248.360.373.088.9
kg/m56.463.577.893.7
114.3
mm42.248.360.373.088.9
mm34.938.150.863.576.2
Tubing Size Thread Connection Product
NumberMin I.D.Max O.D.
Operation:The Model A Pump-Out Plug Assembly is used below a production packer or tailpipe. The assembly holds pressure from below and unseats with a predetermined amount of tubing pressure. The AR Pump-Out Plug assembly is reccomended when running into lines or highly deviated wells.
The Model A Pump-Out Plug Assembly is also used below a production packer to test tubing integrity or to activate a hydraulic set packer. The Model ES allows fluid flow from both directions until a 1-3/8 diameter ball is gravitated down into the landing seat. Pressure applied to tubing string will shear out a ball and seat at a predetermined pressure rating.
Production ToolT597 Packer Tubing Accessories
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in1.660 EUE1.900 EUE2-3/8 EUE2-7/8 EUE3-1/2 EUE
in2-3/8 EUE2-7/8 EUE3-1/2 EUE
lbs/ft2.2202.5003.0633.7504.500
lbs/ft3.2504.2504.500
in1.2501.5002.0002.5003.000
in1.0001.1871.187
AluminumAluminumAluminumAluminumAluminum
2.0002.5003.000
25.4030.1530.15
mm42.248.360.373.088.9
mm60.373.088.9
kg/m55.8863.5077.8095.25114.3
kg/m82.55107.95114.3
mm31.7538.1050.8063.5076.20
mm2.5003.00031.75
Thread Connection
Thread Connection
ProductNumber
Body I.D.
Body I.D.
Seat I.D.
Max O.D.
Max O.D.
Operation:The Open Hole Centralizer is used with the vector anchor and vector packers with the target open hole multi-stage frac system. The centralizer protects the packer from damage during installation in the open hole section of the well bore and swivels to allow for rotation when running in the hole.
Characteristics:• Available in composite or steal.• Helps prevent running damage.• Centralizes when setting.• Swivels.
Horizontal ToolOpen Hole Centralizer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in6 1/86 1/86 1/46 1/4
in5.8125.8125.9305.930
in3 1/2 (88.9) EUE4 1/2 (88.9) EUE3 1/2 (88.9) EUE
4 1/2 (114.3)
mm156156159159
mm147.63147.63150.62150.62
Open Hole Size Thread ConnectionMax Tool O.D.
Operation:The RSB-1 Liner Hanger/Packer was designed to be run in applications where short to long liner tailpipe assemblies are required. All load bearing parts are designed to withstand large tension loads which makes it ideal for both vertical and horizontal applications whereby the liner system is to be anchored in place. The bi-directional slip system prevents both upward and downward movement after the tool is set. The RSB-1 does not rely on setting string weight or tension as it is set completely with differential hydraulic pressure.
The RSB-1 has both a lower and upper seal bore in order to maximize the ID through the connected tubing string. The upper seal bore has a 4.750” (120.65mm) ID and the lower seal bore has a 4.000” (101.60mm) ID.
Characteristics:• Designed for both vertical and horizontal applications.• Incorporates a bi-directional slip system.• Prevents both upward and downward movement.• Upper and lower seal bore.• Internal locking mechanism.• Field adjustable setting pressure.• Field adjustable shear release.• Sets completely with differential pressure.
Horizontal ToolOptima-RSB-1 Liner Hanger/Packer
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in7.0 7.07.0
lbs/ft29-3223-2917-23
in5.8755.9386.188
in4.004.004.00
in4 1/2 (114.3 MM) LT&C4 1/2 (114.3 MM) LT&C4 1/2 (114.3 MM) LT&C
T1265-74A-000T1265-74B-000T1265-74C-000
mm177.8177.8177.8
kg/m43.15-47.6234.22-43.1525.30-34.22
mm149.23150.83157.18
mm101.6101.6101.6
Casing Size Thread Connection Product Number
Max Tool O.D. Min Tool I.D.Casing Weight
Operation:The RSB Latch Seal Assembly is designed to be used with either the RSB or the RSB-1 Packer. The RSB seal assembly incorporates heavy duty dual bonded seals and is ran on the tubing after the packer has been set and engages automatically with a set down weight and disengages with right hand rotation while pulling tension.
The RSB Seal Assembly is designed for the 4.000” (101.60mm) seal bore and the RSB-1 is designed for the 4.750” (120.65mm) seal bore. Characteristics:• Prevents both upward and downward movement when latched.• Heavy duty dual bonded seals.• Available with premium elastomers.• Large bore ID.
Horizontal ToolOptima RSB Latch Seal Assembly
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in7.0 7.0
in4.7504.00
in5.885.00
in3.883.00
in4 1/2 (114.3 MM) 8RD LT&C
3 1/2 (88.9 MM) EUET580-47A-000T265-71B-000
mm177.8177.8
mm120.65101.60
mm149.35127.00
mm98.5576.20
Casing Size Thread Connection Product Number
Max Tool O.D. Min Tool I.D.Seal Bore Size
Operation:The RSB Hydraulic Setting Tool is used to set the RSB/RSB-1 Packer either by itself or in junction with other equipment such as horizontal Multi-Stage Frac System. When ran without a lower plugging device in the tailpipe a large internal by-pass allows fluid to enter the work string eliminating the need to fill while running in the hole. If there is tailpipe assembly such as the Multi-Stage Frac system with some type of float shoe or other type of check valve in place then it is necessary to fill while running in the hole.
Once on depth differential pressure is applied against a plugging device below the tool which activates a hydraulic chamber stroking the RSB Setting Tool against the RSB/RSB-1 Packer which engages the slips and energizes the elements. A secondary integral ball seat is available to ensure a full set if required.
Once the RSB/RSB-1 Packer is set and tested the RSB setting tool is released with a combination of right hand rotation while holding tension. Ports between seals ensures drainage while tripping. Supplementary setting chambers can be added to the standard setting chamber if required.
The RSB-1 Liner Hanger/Packer is ran on the ‘RSB’ setting toold and isset by applying a field adjustable pre-determined tubing differential pressure against a plugging device below the tool such as a pump-out plug, a wireline plug or a dropping/pumping a ball from surface to a ball seat sub. In addition there is a secondary ball seat within the ‘RSB-1’ setting tool if required. The RSB-1 Liner Hanger/Packer has a straight pull field adjustable tshear release.
Characteristics:• Large internal bypass.• Integral ballseat available.• Self drawing when pulling out of hole.• Optional supplementary setting.
Horizontal ToolOptima RSB-1 Hydraulic Setting Tool
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
sq. in21.3
in4.750
in3.00
in3 1/2 (88.9 MM) IF T1062-70A-000
mm137.43
mm120.65
mm76.20
Thread Connection Product
NumberMax Tool O.D. Max Tool I.D.
Setting Chamber Area
Operation:The T- Nemec Frac Sleeve is designed for selectively stimulating multiple zones in either open or cased hole applications. The T-Nemec can be used in either vertical or horizontal wells usually in conjuction with the Lanch-HS Frac Sleeve and Vector-Pack and Vector Anchor Packers. The T-Nemec Frac Sleeve is activated by circulating a ball into a drillable seat inside the tool. Applied differential pressure from above the ball seat shifts the internal piston downward opening up the frac ports. The T-Nemec piston locks securely into place when in the downward position. Characteristics:• Internal locking mechanism.• Field adjustable setting pressure.• Suitable for high pressure applications.• Designed for horizontal and vertical applications.• Designed for multiple zone applications.• Drillable ball seat.• Optional materials available.•Full bore after drill out.
Horizontal ToolT-Nemec Frac Sleeve
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in5.6885.6887.500
in3.004.005.00
in3 1/2 (88.9 MM) EUE
4 1/2 (114.3 MM) LT&C5 1/2 (114.3 MM) LT&C
T115-36A-000T115-45A-000T115-55A-000
mm144.48144.48190.50
mm76.20101.60127.00
Thread Connection Product Number
Max Tool O.D. Max Tool I.D.
Operation:The Launch-HS Frac Sleeve is designed for selectively stimulating multiple zones in either open or cased hole applications. The Launch-HS can be used in either horizontal or vertical wells and is usually the first valve ran in the well accompanied by multiple T-Nemec Frac Sleeves. The Launch-HS Frac Sleeve is hydraulically opened with an internal locking mechanism to ensure the open position is securely maintained.
The Launch-HS Frac Sleeve is activated by circulating a ball into a drillable piston seat located below the Launch-HS. Differential hydraulic pressure shifts the piston down and locks the piston into the open position.
The Launch-HS Frac Sleeve is available with either a steel or a cast iron drillable inner sleeve.
Characteristics:• Large internal bypass.• Integral ballseat available.• Self drawing when pulling out of hole.• Optional supplementary setting.
Horizontal ToolLaunch-HS Frac Sleeve
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in5.6885.6887.375
in3.004.004.50
in3 1/2 (88.9 MM) EUE
4 1/2 (114.3 MM) LT&C5 1/2 (139.7 MM) LT&C
T1016-36A-000T1016-45A-000T1016-55A-000
mm144.48144.48190.50
mm76.20101.60114.30
Thread Connection Product Number
Max Tool O.D. Max Tool I.D.
Operation:The Vector Anchor and the Vector Pack Packers are designed to be run in either on open or cased hole multiple zone applications in either vertical or horizontal wells. Both packers are hydraulically set with an internal locking mechanism providing a positive and reliable long term set. The Vector Pack Packer incorportates a one piece bi-directional slip system in order to help prevent movement during higher pressure operations. Typically, on multiple zone horizontal open hole applications the HydroPac would be used as the toe packer. Durable construction and reliability makes the Vector Pack Packer and the Vector Anchor excellent alternatives to using inflatable packers.
The Vector Pack Packer and Vector Anchor are hydraulically set by applying differential pressure against a temporary/permanent plugging device in the tubing below the packer. The setting pressure can be adjusted through field accessible setting shear screws. Both packers have a straight pull shear release which can also be adjusted in the field.
Characteristics:• Single action setting piston.• Outer components locked to prevent premature setting.• Hydropac incorporates a bi-directional slip system.• Internal locking mechanism.• Field adjustable shear release.• Available with carbide slips.• Sour service version available.• Available with premium elastomers.
Horizontal ToolVector Anchor/Vector Pack Packers
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in6 1/8 - 6 1/46 1/8 - 6 1/46 1/8 - 6 1/46 1/8 - 6 1/46 1/8 - 6 1/46 1/8 - 6 1/46 1/8 - 6 1/46 1/8 - 6 1/4
7 7/87 7/8
HydroPacHydroPac
IsoPacIsoPac
HydroPacHydroPac
IsoPacIsoPac
HydroPacIsoPac
in5.7505.8755.7505.8755.7505.8755.7505.8757.5007.500
in3.0003.0003.0003.0003.7814.0003.7814.0004.9504.950
T275-73A-000T275-73B-000T276-73A-000T276-73B-000T275-74A-000T275-74B-000T276-74A-000T276-74B-000T276-84A-000T276-84B-000
mm156-159156-159156-159156-159156-159156-159156-159156-159200.03200.03
mm146.05149.23146.05149.23146.05149.23146.05149.23190.50190.50
mm76.2076.2076.2076.2096.04
101.6096.04
101.60125.73125.73
Open Hole Size Thread Connection Product Number
Max Tool O.D. Max Tool I.D.Packer Type
in3 1/2 (88.9) EUE3 1/2 (88.9) EUE3 1/2 (88.9) EUE3 1/2 (88.9) EUE
4 1/2 (114.30) LT&C4 1/2 (114.30) LT&C4 1/2 (114.30) LT&C4 1/2 (114.30) LT&C5 1/2 (139.70) LT&C5 1/2 (139.70) LT&C
Features:• Hydraulic set packer• Setting system is incorporated in the Packer• Dual Bore for Full Bore ID through the seal unit and Packer• Temp rated 350 degree farenheit• Working pressure of 10,000 PSI
Characteristics:• Setting tool allows setting of the packer without putting pressure inside the total completion.• The dual bore system allows for full bore which allows for maximum seat size in the upper frac sleeves.• Packer setting shear pins can easily be changed in the field.• Special slip material keeps the packer from pre-setting while running in the wall.• HD left hand thread on top of the seal bore allows easy snap in and easy RH rotation out of the packer.• Ball drop from surface into setting tools prevents premature setting of the packer while running.• Ball drop shear out seal after the packer is set prevents a wet tubing sting pull.• The anchor latch will hold 10,000 PSI without any string weight.
Hanger PackerLaunch-HS Frac Sleeve
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
sq. in5.079
in5.875
in4.750
in4.00 T673-73B-000
mm32.768
mm149.22
mm120.65
mm101.60
Product Number
Max Tool O.D. Max Tool I.D. Min Tool I.D.Setting
Chamber Area
Features:• Setting Optima-S Hanger Packer• Hydraulic system sets packer• Setting tool seals in lower bore• Isolated setting piston• Seat shears for bypass after setting• Sets by ball drop• Temp rated 350 degrees farenheit• Working pressure of 10,000 PSI
Characteristics:• Setting tool allows setting of the packer without putting pressure inside the total completion.• Seals in lower bore to protect upper bore.• HD left hand thread on top allows easy RH rotation out of the packer.• Ball drop from surface into setting tools prevents premature setting of the packer while running.• Ball drop from surface into setting tools prevents premature setting of the packer while running .• Ball drop shear out seal after the packer is set prevents a wet tubing sting pull.• Designed for 10K operation.
Hanger PackerTarget Zone Optima-S Hanger Running & Setting Tool
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
in1.750
running3 1/2
in88.69
in2.25 T580-47A-72B-030
mm44.450
releasing5.125-4
mm2252.7
mm57.150
Product NumberThread Tool Length Min Tool I.D.Seat ID
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
10.04
12.86
14.14
15.62
16.37
17.26
18.75
20.09
24.70
43.15
43.90
44.64
47.62
50.15
50.59
52.08
52.53
56.54
59.52
13.39
19.34
20.83
22.32
22.44
23.06
25.30
29.76
34.22
29.76
35.71
38.02
38.63
41.66
43.67
47.62
48.21
53.57
56.54
59.52
65.47
72.91
19.34
25.30
28.88
29.76
32.74
34.22
35.71
38.69
41.66
28.73
60.26
67.70
75.89
82.58
90.32
97.76
168.96
166.07
164.08
163.98
162.51
161.70
160.93
159.41
157.84
258.89
255.27
252.73
250.19
247.90
245.36
242.82
165.79
162.89
161.16
160.81
159.33
158.52
157.76
156.24
154.66
254.91
251.31
248.77
246.23
243.94
241.40
238.86
22387/05
21677.38
21161.25
21096.73
20709.64
20580.60
20322.54
19935.44
19548.35
52645.06
51161.19
50193.45
49161.19
48257.97
47290.23
46322.49
.682
.660
.645
.644
.631
.626
.620
.609
.596
1.604
1.560
1.529
1.499
1.471
1.440
1.412
17.86
19.34
25.30
27.28
28.94
29.76
32.74
35.71
37.50
38.69
39.43
41.66
43.15
47.62
50.59
48.06
53.57
56.54
59.52
62.50
64.73
69.94
79.61
86.30
159.69
158.88
155.83
154.56
154.05
153.64
152.12
150.39
151.51
148.72
148.26
147.09
146.41
144.15
142.11
228.63
226.59
225.68
224.41
233.49
22.38
220.50
216.79
214.25
156.51
155.70
152.65
151.38
15088
150.47
148.95
147.22
148.34
145.54
145.08
143.92
143.23
141.10
138.94
224.66
222.63
221.72
220.45
219.53
318.41
216.54
213.08
210.54
20064.48
19806.41
19096.74
18774.16
18645.12
18516.09
18193.51
17741.90
18064.48
17419.32
17290.29
16967.71
16838.68
16322.55
15870.94
41032.18
40322.50
39999.92
39548.31
39225.73
38838.63
38193.47
36967.67
36064.44
.612
.604
.582
.572
.568
.564
.555
.542
.550
.531
.526
.518
.514
.498
.483
1.251
1.229
1.220
1.205
1.196
1.184
1.164
1.126
1.099
131.88
128.12
127.30
126.34
125.98
125.73
124.26
121.36
118.62
208.05
205.66
205.00
204.85
203.63
202.72
201.19
201.09
198.76
197.49
196.22
193.68
190.78
128.70
124.94
124.13
123.16
122.81
122.56
121.08
118.19
115.70
204.88
202.49
201.83
201.68
200.46
199.54
198.02
197.92
195.58
194.26
193.04
190.50
187.60
13677.39
12903.20
12709.65
12516.10
12451.59
12387.07
12193.52
11548.36
11032.24
33999.93
33225.74
33032.19
32967.68
32580.58
322.58.00
31806.39
31806.39
31032.20
30645.10
30258.00
29483.81
28580.59
11.90
17.11
19.34
19.58
22.32
26.78
31.25
29.76
31.56
35.71
29.28
44.19
50.15
53.57
56.54
58.03
66.96
119.28
115.82
114.15
113.79
11.96
108.61
105.51
180.98
179.96
178.44
177.01
174.63
171.83
170.31
169.04
168.29
163.70
119.28
115.82
114.15
113.79
11.96
108.61
105.51
177.80
176.78
175.26
173.84
171.45
168.66
167.13
165.86
165.10
160.53
11161.27
10516.11
10193.53
10193.53
9870.95
9290.30
8709.66
25741.88
25419.30
25032.21
24645.11
23935.44
23161.24
22774.15
22451.57
22258.02
21032.22
.340
.321
.312
.310
.300
.283
.266
.784
.774
.762
.750
.730
.708
.695
.684
.677
.641
10709
104.75
103.89
102.90
102.26
101.60
100.53
99.57
97.18
157.07
156.67
156.31
154.79
153.62
153.42
152.50
152.40
150.37
148.23
103.91
101.57
100.71
99.72
99.09
98.43
97.36
96.39
94.01
153.90
153.49
153.14
151.61
150.44
150.24
149.33
149.23
147.19
145.06
9032.24
8580.63
8451.60
8322.56
8258.05
8129.02
7935.47
7806.44
7419.34
19354.80
19290.28
19225.77
18838.67
18516.09
18516.09
18258.03
18253.03
17741.90
17290.29
.273
.262
.259
.254
.251
.246
.242
.237
.226
.591
.588
.585
.574
.564
.563
.556
.556
.540
.526
.417
.393
.388
.382
.380
.378
.369
.353
.337
1.037
1.013
1.006
1.005
.992
.983
.970
.968
.946
.933
.922
.898
.871
Weightkg/m
Weightkg/m
I.D.mm
I.D.mm
O.D.mm
O.D.mm
114.30(4-1/2”)
177.80(7”)
127.00(6”)
193.68(7-5/8”)
139.70(5-1/2”)
219.08(8-5/8”)
168.28(6-5/8”)
244.48(9-5/8”)
177.80(7”) 273.05
(10-3/4”)
Drift I.D.mm
Drift I.D.mm
Areamm sq.
Areamm sq.
Capacitym3/100m
Capacitym3/100m
Hanger PackerAPI Casing Data
1700 N. IndianwoodBroken Arrow, Oklahoma 74012
918.893.5544TargetCompletions.com
6.75
8.64
9.50
10.50
11.00
11.60
12.60
13.50
16.60
29.00
29.50
30.00
32.00
33.70
34.00
35.00
35.30
38.00
40.00
9.00
13.00
14.00
15.00
15.08
15.50
17.00
20.00
23.00
20.00
24.00
25.55
25.96
28.00
29.35
32.00
32.40
36.00
38.00
40.00
44.00
49.00
13.00
17.00
19.41
20.00
22.00
23.00
24.00
26.00
28.00
32.75
40.50
45.50
51.00
55.50
60.70
65.70
6.652
6.538
6.460
6.456
6.398
6.366
6.336
6.276
6.214
10.192
10.050
9.950
9.850
9.760
9.660
9.560
6.527
6.413
6.345
6.331
6.273
6.241
6.211
6.151
6.089
10.036
9.894
9.794
9.794
9.604
9.504
9.404
34.7
33.6
32.8
32.7
32.1
31.9
31.5
30.9
30.3
81.6
79.3
77.8
76.2
74.8
73.3
71.8
4.29
4.15
4.06
4.05
3.97
3.94
3.90
3.83
3.75
10.09
9.81
9.62
9.43
9.25
9.06
8.88
12.00
13.00
17.00
18.33
19.45
20.00
22.00
24.00
25.20
26.00
26.50
28.00
29.00
32.00
34.00
32.30
36.00
38.00
40.00
42.00
43.50
47.00
53.50
58.00
6.287
6.255
6.135
6.085
6.065
6.049
5.989
5.921
5.965
5.855
5.837
5.791
5.764
5.675
5.595
9.001
8.921
8.885
8.835
8.799
8.755
8.681
8.535
8.435
6.162
6.130
6.010
5.960
5.940
5.924
5.864
5.796
5.840
5.730
5.712
5.666
5.639
5.550
5.470
8.845
8.765
8.729
8.679
8.643
8.599
8.525
8.389
8.289
31.1
30.7
29.6
29.1
28.9
28.7
28.2
27.5
28.0
27.0
26.8
26.3
26.1
25.3
24.6
63.6
62.5
62.0
61.3
60.8
60.2
59.2
57.3
55.9
3.85
3.80
3.66
3.60
3.57
3.55
3.49
3.41
3.46
3.34
3.31
3.26
3.23
3.13
3.04
7.87
7.73
7.67
7.58
7.52
7.45
7.32
7.08
6.91
5.192
5.044
5.012
4.974
4.960
4.950
4.892
4.778
4.670
8.191
8.097
8.071
8.065
8.017
7.981
7.921
7.917
7.825
7.775
7.725
7.625
7.511
5.067
4.919
4.887
4.849
4.835
4.825
4.767
4.653
4.555
8.066
7.972
7.946
7.940
7.892
7.856
7.796
7.792
7.700
7.652
7.600
7.500
7.386
21.2
20.0
19.7
19.4
19.3
19.2
18.9
17.9
17.1
52.7
51.5
51.2
51.1
50.5
50.0
49.3
49.3
48.1
47.5
46.9
45.7
44.3
8.00
11.50
13.00
13.16
15.00
18.00
21.00
20.00
21.21
24.00
26.40
29.70
33.70
36.00
38.00
39.00
45.00
4.696
4.560
4.494
4.480
4.408
4.276
4.154
7.125
7.085
7.025
6.969
6.875
6.765
6.705
6.655
6.625
6.445
4.571
4.435
4.369
4.355
4.283
4.151
4.029
7.000
6.960
6.900
6.844
6.750
6.640
6.580
6.530
6.500
6.320
17.3
16.3
15.8
15.8
15.3
14.4
13.5
39.9
39.4
38.8
38.2
37.1
35.9
35.3
34.8
34.5
32.6
2.14
2.02
1.96
1.95
1.89
1.78
1.68
4.93
4.87
4.79
4.72
4.59
4.45
4.37
4.30
4.26
4.03
4.215
2.124
4.090
4.051
4.026
4.000
3.958
3.920
3.826
6.184
6.168
6.154
6.094
6.048
6.040
6.004
6.000
5.920
5.836
4.091
3.999
3,965
3.926
3.901
3.875
3.833
3.795
3.701
6.059
6.043
6.029
5.969
5.923
5.915
5.879
5.875
5.795
5.711
14.0
13.3
13.1
12.9
12.8
12.6
12.3
12.1
11.5
30.0
29.9
29.8
29.2
28.7
28.7
28.3
28.3
27.5
26.8
1.72
1.75
1.63
1.60
1.58
1.55
1.52
1.49
1.42
3.72
3.70
3.68
3.61
3.55
3.54
3.50
3.50
3.40
3.31
2.62
2.47
2.44
2.40
2.39
2.38
2.32
2.22
2.12
6.52
6.37
6.33
6.32
6.24
6.18
6.10
6.09
5.95
5.87
5.80
5.65
5.48
Weightkg/m
Weightkg/m
I.D.mm
I.D.mm
O.D.mm
O.D.mm
4-1/27
6
7-5/8
5’1/2
8-5/8
6-5/8
9-5/8
7
10-3/4
Drift I.D.mm
Drift I.D.mm
Areamm sq.
Areamm sq.
Capacitym3/100m
Capacitym3/100m
Hanger PackerAPI Casing Data