Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Features:• Portable, positive stop, economical• Can be mounted on service vehicles• Utilizes 2-piece collet assemblies• Spacer rings control the crimp diameter
Capabilities:• -4 (1/4”) thru -16 (1”) Braided Hose• -6 (3/8”) thru -16 (1”) 1Spiral Hose
Part No. Description897.1001 ET1000 - Basic Machine Only, (No Pump)897.1003 ET1000 - Machine with Air/Hydraulic Pump897.1004 ET1000 - Machine with 110 Volt Electric Pump897.1000.01 ET1000 - Adapter Ring Req’d to use ‘U’ and ‘Z’ collets
The portable ET1000 crimp machine boasts a broad crimp capability with an ease-of-use that is sure to please hose assemblers. With four pump options — air/hydraulic, hand, 110V, or 12V DC — this portable machine comes equipped with a stand pre-drilled for mounting to a workbench or table-top.
Part No. Description897.1187.1 ET1187 Bench Mount Machine (No Pump)897.1187.17 ET1187 Bench Mount Bracket897.1187.2 ET1187 Truck Mount Machine (No Pump) 897.1187.19 ET1187 Truck Mount Bracket897.1187.001 ET1000PK-001 2-Stage Hand Pump897.1187.002 ET1000PK-002 Air/Hydraulic Pump897.1187.003 ET1000PK-003 110 Volt Electric Pump897.1187.004 ET1000PK-004 12 Volt DC Electric Pump
897.1187.3 ET4020TP-0002 Die Pkg for -4 thru -20 Braided and -6 thru 12 Spiral hose
897.1187.4 FT1380-200-M420 Die for -16 Spiral897.1187.420 FT1380-200-M465 -20 Die for Spiral Hose
The ET1187 machine is our most economical variable crimp machine to date. It boasts a broad crimp capability with a new “ease of use” that is sure to excite hose assemblers in the field. It’s as simple as turning the collar to the correct color to match the layline on the hose, then adjust the ring so that the correct size dot aligns with the correct size line on the collar, and the machine is set for the correct crimp.
Benefits:• Sliding pusher allows for easier fitting insertion into the machine• Simple positive-stop crimp diameter control system for
consistent crimping time after time, with no operator adjustments required
• Easily transported between job sites• Versatile power source• Electricity is required only when using an electric pump
ET1000 PORTABLE CRIMPER
ET1187 BENCH MOUNT MACHINE Features:• Will mount on service vehicles or bench tops• Can be used remotely, 65 lbs• Can be powered with virtually any 10,000 psi
hydraulic power source (minimum of 36 cu. inch pump reservoir capacity is required)
• Utilizes existing FT1380 dies
Capabilities:• -4 (1/4”) thru -20 (1-1/4”) Braided Hose• -6 (3/8”) thru -16 (1”) Spiral Hose
Benefits:• Color-coded collar for core hose products• Makes setup fast and easy• Easily transported between job sites• Versatile power source options• Lower investment cost than other variable crimpers• Comes with high efficiency PFTE grease
You can download and print this issue on our website, for free!www.winzer.com/resource_center
SERV
ICE
THAT
WO
RKS®
PRODUCT HIGHLIGHTFluid Power
Ed. 2
0 Vo
l. 4
Stay connected to us!
FASTENERS
NEW
T-6 1/2 WEDGE SIDE INDICATOR AUTO BULBS
Part No. Description724.7443 7443 Bulb 12 Volt 21/5 Watt724.07444 7444 Bulb 12.8 Volt 28/8 Watt
• Clear color bulbs• Long-life• T-6 1/2 wedge side indicator
automotive bulbs
NEW
STAINLESS STEEL SOCKET HEAD SHOULDER SCREWS
ASME/ANSI B18.3,ASTM
A574
Finish: Plain
Material: 18-8 Stainless Steel
• Measurement: Inch• Origin: Imported• Tensile Strength: Minimum 70,000 psi• Drive Type: Internal Hex• Thread Type: Coarse• Head Style: Socket
Part No. Dia. LengthShoulder
Dia.ShoulderLength
Thread Size
Thread Length
Key Size
150.0.316.14 3/16” 1/4” 3/16” 1/4” 8-32 3/16” 3/32”150.0.14.38 1/4” 3/8” 1/4” 3/8” 10-24 3/8” 1/8”150.0.14.12 1/4” 1/2” 1/4” 1/2” 10-24 3/8” 1/8”150.0.14.58 1/4” 5/8” 1/4” 5/8” 10-24 3/8” 1/8”150.0.14.34 1/4” 3/4” 1/4” 3/4” 10-24 3/8” 1/8”150.0.14.1 1/4” 1” 1/4” 1” 10-24 3/8” 1/8”150.0.14.112 1/4” 1-1/2” 1/4” 1-1/2” 10-24 3/8” 1/8”150.0.516.12 5/16” 1/2” 5/16” 1/2” 1/4”-20 7/16” 5/32”150.0.516.34 5/16” 3/4” 5/16” 3/4” 1/4”-20 7/16” 5/32”150.0.516.1 5/16” 1” 5/16” 1” 1/4”-20 7/16” 5/32”150.0.516.114 5/16” 1-1/4” 5/16” 1-1/4” 1/4”-20 7/16” 5/32”
Part No. Dia. LengthShoulder
Dia.ShoulderLength
Thread Size
Thread Length
Key Size
150.0.38.12 3/8” 1/2” 3/8” 1/2” 5/16”-18 1/2” 3/16”150.0.38.34 3/8” 3/4” 3/8” 3/4” 5/16”-18 1/2” 3/16”150.0.38.78 3/8” 7/8” 3/8” 7/8” 5/16”-18 1/2” 3/16”150.0.38.1 3/8” 1” 3/8” 1” 5/16”-18 1/2” 3/16”150.0.38.114 3/8” 1-1/4” 3/8” 1-1/4” 5/16”-18 1/2” 3/16”150.0.38.112 3/8” 1-1/2” 3/8” 1-1/2” 5/16”-18 1/2” 3/16”150.0.12.38 1/2” 3/8” 1/2” 3/8” 3/8”-16 5/8” 1/4”150.0.12.12 1/2” 1/2” 1/2” 1/2” 3/8”-16 5/8” 1/4”150.0.12.58 1/2” 5/8” 1/2” 5/8” 3/8”-16 5/8” 1/4”150.0.12.34 1/2” 3/4” 1/2” 3/4” 3/8”-16 5/8” 1/4”150.0.12.1 1/2” 1” 1/2” 1” 3/8”-16 5/8” 1/4”
ELECTRICAL
INSPECTOR PEN LIGHT, WITH 3 LIGHT MODES, RECHARGEABLE
Part No.715.2698
3 LIGHT MODES:• HIGH (360 lumens)• LOW (120 lumens) • STROBE (360 lumens)
DESIGN:• Impact-resistant and waterproof (IP37)• Detachable belt/pocket clip• Anodized aluminum body
• Rear-positioned ON/OFF button• 4x adjustable zoom• Powered by a 10850 rechargeable battery
(included) or by 2 AAA batteries (NOT included)• 0.1375 lbs• Length: 6.5” • Diameter: 0.7” • Micro USB to USB charging cable included
NEW
GRADE 70 TRANSPORT CLEVIS GRAB HOOK
Import Part No. Size
Working Load Limit In Pounds
(A)Inches
(B)Inches
(C)Inches
(D)Inches
669.224.14 1/4” 3150 .32” .38” .31” 1.94”669.224.516 5/16” 4700 .43” .44” .38” 2.38”669.224.38 3/8” 6600 .48” .56” .47” 2.63”669.224.12 1/2” 11300 .57” .69” .63” 3.50”
Clevis hooks are not designed for overhead lifting, but instead are most often used for load securement with tie-down chains. Clevis hooks can be used in combination with various grades of chain including Grade 30, 43, 70 and 80. These feature a U-shaped attachment point with a pin to secure chain or other rigging attachments.
• Grade: 70• Forged steel• Heat-treated
• Yellow chromate• Not to be used for overhead lifting
D
A
B
C
NEW
2 Service That Works... Products That Perform
ELECTRICAL (CONT.)
• Voltage: Rated at 60V or less• Temperature: Rated at 80° C (176°F)
• Specifications: SAE J1128, SAE J386• 500 ft roll
Part No. Color773.03.165 Black773.06.165 White773.02.165 Red773.05.165 Blue773.08.165 Orange773.07.165 Brown773.04.165 Green773.01.165 Yellow
16 GAUGE 14 GAUGE
Part No. Color773.03.145 Black773.06.145 White773.02.145 Red773.05.145 Blue773.08.145 Orange773.04.145 Green773.07.145 Brown773.01.145 Yellow
500 FOOT ROLL GENERAL-PURPOSE PRIMARY WIRE
• Grommet: Silicone rubber• Insert Retainer: Thermoplastic• Receptacle Interface Seal: Silicone rubber
• Shell: Thermoplastic• Wedgelocks: Thermoplastic
DTP SERIES CONNECTORS
Part No. Description553.07025 2 Cavity Plug553.07045 4 Cavity Plug553.07029 2 Cavity Receptacle553.07049 4 Cavity Receptacle
Part No. Description553.08029 2-Way Wedgelock Receptacle553.18049 4-Way Wedgelock Receptacle553.18045 4-Way Wedgelock Plug553.08025 2-Way Wedgelock Plug
NEW
NEW
• One-piece ratchet closure allows for easy installation, one touch close
• Screwdriver release enables easy adjustments and maintenance
• Interior rib design minimizes movement due to vibration
• Impact modified, heat and UV stabilized PA66 plastic ensures long term durability
• High-grade steel mounting plate tolerates high torque mounting
• Treated to resist chemicals and salt spray• RoHS compliant
• Soft material inserts snap precisely into body of the clamp
• Provides an enhanced level of protection for applications with movement, high vibration or soft cable bundles
• Use two per clamp
NYLON CABLE RATCHET CLAMPS
555.1417
Ratchet P-Clamp,.24”–.54” Bundle Dia,.41” Hole Dia, PA66,
Black, Size A
555.1390
Ratchet P-Clamp,.52”–.77” Bundle Dia,.41” Hole Dia, PA66,
Black, size B
555.1475
Ratchet P-Clamp,.76”–1.42” Bundle Dia,
.41” Hole Dia, PA66,Black, Size C
555.1501
Ratchet P-Clamp,1.38”–2.01” BundleDia, .41” Hole Dia,PA66, Black, Size D
555.1530
Ratchet P-ClampSize A Soft Insert
ThermoplasticElastomer
555.1531
Ratchet P-ClampSize B Soft InsertThermoplastic
Elastomer
555.1532
Ratchet P-ClampSize C Soft Insert
ThermoplasticElastomer
555.1533
Ratchet P-ClampSize D Soft Insert
ThermoplasticElastomer
INSERTS
Part No. Description549.71.1614 .157 16-14 AWG Receptacle549.81.1614 .157 16-14 AWG Plug549.71.11614 .180 16-14 AWG Recptacle549.81.11614 .180 16-14 AWG Plug549.71.2218 .157 22-18 AWG Recptacle549.81.2218 .157 22-18 AWG Plug549.71.12218 .180 22-18 AWG Receptacle549.81.12218 .180 22-18 AWG Plug
• RoHS compliant• Rated for 105° C (221° F)• Made in USA
OPTISEAL BULLET TERMINALS
NEW
3Service That Works... Products That Perform
FLUID POWER
3-PLY BLUE SILICONE HOSE
Part No. Dia. Length893.3.062 5/8” 3’893.3.075 3/4” 3’893.3.1 1” 3’
• Made from specially coated silicone elastomer with woven polyester fabric• Ideal for extreme temperature and various pressure ranges where high performance levels are required• Meets SAE J20R1 Class A• Color: Blue
Part No.Per Ft.
HoseI.D.
HoseO.D.
WorkPress (PSI)
Min BurstPress (PSI)
Min BendRadius
GatesPart No.
Reel Qty/FT ± 10%
899.003.04.1 1/4” 0.57” 5,800 23,200 2.0 4 MXT 550899.003.06.1 3/8” 0.675” 4,800 19,200 2.5 6 MXT 400899.003.08.1 1/2” 0.795” 4,000 16,000 2.75 8 MXT 330899.003.10.1 5/8” 0.945” 3,625 14,500 3.0 10 MXT 220899.003.12.1 3/4” 1.08” 3,125 12,500 4.75 12 MXT 220899.003.16.1 1” 1.38” 2,400 9,600 6.0 16 MXT 165
• Recommended For: High-pressure hydraulic oil lines• Meets or exceeds SAE 100R16 and 100R17 dimension and performance• Tube: Black, oil-resistant, synthetic rubber tube• Reinforcement: Braided high-tensile steel wire reinforcement
• Cover: Black, abrasion-resistant, synthetic rubber; meets MSHA flame resistance• Temperature Range: -40°F to +212°F (-40°C to +100°C)• Couplings: Mega-Crimp couplings
GATES® MEGASYS™ MXT ™— SAE 100R16
Part No. Per Foot
Hose I.D.
Hose O.D.
Work Press. (PSI)
Min. Burst Press. (PSI)
Min. Bend Radius Eaton No.
897.280.4.1 1/4” 17/32” 6500 26000 2.00 H28004897.280.6.1 3/8” 11/16” 5300 21200 2.50 H28006897.280.8.1 1/2” 13/16” 4500 18000 3.50 H28008897.280.10.1 5/8” 15/16” 4000 16000 4.00 H28010897.280.12.1 3/4” 1-3/32” 3500 14000 4.75 H28012897.280.16.1 1” 1-13/32” 3000 12000 6.00 H28016897.280.20.1 1-1/4” 1-13/20” 2500 10000 8.25 H28020897.280.24.1 1-1/2” 2” 2000 8000 10.00 H28024897.280.32.1 2” 2-1/2” 1600 6400 12.50 H28032
• Inner Tube: Synthetic rubber• Reinforcement: 2 steel braids• Cover: WeatherSHIELD synthetic rubber cover• Temp. Range: Petroleum-based hydraulic fluids -40° C to +127° C (-40° F to +260° F)• Water-based Hydraulic Fluids: -40° C to +70° C (-40° F to +158° F)
• Hose Ends: C-O-C ‘Z’ Series• Typical Application: Hydraulic system service with petroleum and water-based fluids,
for general industrial service• MSHA Accepted
H280 WEATHERSHIELD™ HYDRAULIC HOSE SAE 100R16
4 Service That Works... Products That Perform
FLUID POWER (CONT.)
• An excellent heavy-duty cutting machine• A portable saw that can cut all hoses,
including wire-reinforced• Includes three abrasive blades• 3-1/2 H.P. motor• 110/115 volts, 15 amp
HOSE CUTTING MACHINE
Part No.897.0.60
• 1/4” Industrial with 1/4” Female NPT• High-quality 6-ball coupler• Works with tool connected or disconnected
• Max Working Pressure: 120 PSI• Already on your hose and ready to use• Easy push-button trigger
1/4” INDUSTRIAL COBLO COUPLER BLOW GUN
Part No.688.749
• Fits the 5 most popular style plugs: - ARO Interchange - Industrial Interchange - Automotive (Tru-Flate) Interchange - Lincoln Interchange - EURO (Megaflow) Interchange• Chrome-plated steel and aluminum• Automatically connects under zero pressure• Safely vents and disconnects under zero pressure, no whip
• Fits the 5 most popular style plugs: - ARO Interchange - Industrial Interchange - Automotive (Tru-Flate) Interchange - Lincoln Interchange - EURO (Megaflow) Interchange• Chrome-plated steel and aluminum• Automatically connects under zero pressure• Safely vents and disconnects under zero pressure, no whip
Note: For high-vibration applications, we strongly recommend the use of a lead-in hose to lengthen the life of the coupler
3/8” FPT 1/4” BODY 5-IN-1 SAFETY EXHAUST COUPLER 1/4” FPT 5-IN-1 SAFETY EXHAUST COUPLER
Part No.688.747
Part No.688.748
• Automatically layers hose back and forth across reel• 3/4 in. swivel reduces flow restrictions and allows for maximum flow• Built-in handle for portability: flat base allows for it to rest on ground
• Up to seven different locked angles• Extreme all-weather flexibility (-40° F to 140° F)• Max Working Pressure: 300 PSI
Part No. ModelHose O.D.
Hose FT.
897.02.3875 L8306FZ 3/8 75
LEGACY FLEXZILLA AIR HOSE REEL
Part No. Size896.1125 1/2” x 25'896.1150 1/2” x 50'
• Reinforced polyurethane provides low weight and flexibility• Equipped with reusable strain relief fittings • Broad temperature range• Made in USA
GARDEN FLEXEEL
• Heavy-duty all zinc metal body• Male threaded front for attaching accessories• Solid brass valve system with permanent adjusting nut• Hold-open clip for continuous spraying• Rust-resistant stainless steel spring• Self-adjusting “duck” packing for the ultimate leak-proof seal
PISTOL-GRIP WATER NOZZLE
Part No.683.075
• Features a flexible hybrid PVC construction• Lays flat even in cold environments• Easy roll-out and storage• Resists kinking• High-quality plated brass fittings provide
strong and durable connection• Yellow Belly Industrial
Part No. Size896.5850 5/8” x 50’
WASH DOWN HOSE
5Service That Works... Products That Perform
SHOP SUPPLIES
AUTOMOTIVE
500.4685
Exterior Grill Trim RetainerMini-Cooper, Countryman, Works and S ̀ 13+
OEM NO. 51-46-7-453-747Top Head Dia.: 10mm
Bottom Head Dia.: 12mmStem Dia.: 8mm
Stem Length: 9mm
501.8864
Bumper Cover, Radiator Support, Under Cover and Wheel Opening Retainer
Lexus CT 200h, GX 460, IS 300, IS 350, LC 500h, NX 200t, NX 300H, RX 350 and RX 450H
Toyota 4-Runner, C-HR, Camry, Corolla, Corolla iM, Prius, Prius Prime, Prius V and RAV4 ̀ 13+,
Scion iM, tC and xB ̀ 08-̀ 16OEM No. 90467-07220
Hole: M7Head Diameter: 20mm
Stem Length: 12mm
500.8652
Rocker Molding RetainerAcura MDX and NSX ̀ 14+, Honda Odyssey,
Pilot and Ridgeline ̀ 16+OEM No. 91512-TZ5-A01
Top Head Size: 18mm x 18mmBottom Head Size: 20mm x 22mm
Stem Dia.: 9.8 mmStem Length: 22.5 mm
500.4686
Roof Line Reveal Molding Retainer with SealerBMW 320i, 328d, 330e, 330i, 340i and M3 ̀ 17+
OEM No. 51-13-711-7-240Hole: M6
Width: 9 mmLength: 30 mm
Stem Length: 11 mm
502.4272
Front and Rear Bumper Specialty Nut w/ Pastisol Pad
Ford Edge, Escape, Expedition,Explorer, Fusion, Mustang and Transit ̀ 11+, Lincoln Continental,
MKC, MKS, MKX, MKZ and Navigator ̀ 11+OEM No. W715197-S439
Screw Size: M4.8-1.6Head Size: 14mm x 23mm
Stem Length: 7mm
501.1756
M6.3-1.81 x 16mm Phillips Truss Head Tapping Screw
Head Dia.: 15mmBlack Finish
395.410
M10-1.25 Hex Nut Yellow Zinc w/FlangeFlange: 19 mm
Hex: 14 mm
140.71213
1/4’’-14 x 5/8’’ Zinc Slotted Hex Flange Head Machine Screw Ford Applications
OEM No. N800369Hex Head: 5/16’’Washer Dia.: 5/8’’
NEW
Part No.Min(in)
Max(in)
Min(mm)
Max(mm)
534.01.20 1-1/8” 1-9/16” 29 40534.01.24 1-1/2” 1-13/16” 38 46534.01.28 1-3/4” 2-1/16” 43 52534.01.32 1-15/16” 2-5/16” 48 59534.01.36 2-1/8” 2-9/16” 53 65534.01.40 2-5/16” 2-13/16” 58 71534.01.44 2-1/2” 3-1/16” 63 78534.01.48 2-11/16” 3-5/16” 67 84
• 1/2” band, 1/2” spring liner• 5/16” slotted hex head • Min: 1-1/8 Inch (29mm) / Max: 1-9/16 Inch (40mm)• Installation Torque: 48 in-lbs (5.4 nm)• Spring compensation over 360 degrees• Improved clamp roundness eliminates leak paths at housing juncture• Trough shape helps clamp “grip” by penetrating deeper into the hose wall over a narrower cross-section (footprint)• Applications include radiators, turbo charged applications, solar panels, vehicle HVAC, pipe fluid connectors, soft
hose applications, generators, home appliances, tractors/trucks and most vehicle fluid applications
SmartSeal Clamps are comprised of two main parts, the clamp assembly and the SmartLiner.• The SmartLiner is a spring liner made of high-quality stainless steel integrated inside the clamp• Designed to be smart, the thin gauge steel expands and contracts around the hose with temperature changes• Clamp rides on top of lubricated liner, distributing pressure more evenly around hose• All components are stainless steel
IDEAL - TRIDON® SMARTSEAL CLAMPS
6 Service That Works... Products That Perform
ASSORTMENTS
5897.660.44
5897.660.86
5897.668.46
3897.668.1616
3897.662.1616
3897.665.1212
3897.664.1212
3897.661.66
5897.660.46
5897.660.88
5897.668.66
5897.662.44
5897.665.44
3897.665.1616
3897.664.1616
3897.661.88
5897.660.64
5897.660.1212
5897.668.68
5897.662.46
5897.665.46
5897.664.44
3897.676.44
5897.660.66
3897.660.1616
5897.668.88
5897.662.88
5897.665.68
5897.664.66
3897.676.66
5897.660.68
5897.668.44
3897.668.1212
3897.662.1212
5897.665.88
5897.664.88
3897.661.44
973. Assortments Do Not ship with bin labels
Drawer (Empty)953.924
Part No.971.675
BARBED BRASS FITTINGS ASSORTMENT51 PCS
3/8” Hose Mender677.02.6 (1)
1/2” Hose 3/8” PipeMale Pipe Rigid
677.01.68 (2)
3/8” Hose 3/8” TubeFemale Inverted Rigid
677.042.66 (2)
3/8” Hose 1/4” PipeFemale Pipe
677.045.64 (2)
1/2” Hose Mender677.02.8 (1)
1/2” Hose 1/2” PipeMale Pipe Rigid
677.01.88 (2)
1/2” Hose 1/2” TubeFemale Inverted Rigid
677.042.88 (2)
3/8” Hose 3/8” PipeFemale Pipe
677.045.66 (2)
3/8” Hose 1/8” PipeMale Pipe Rigid
677.01.62 (2)
3/8” Hose 5/16” TubeInverted Male Swivel
677.011.65 (2)
3/8” Hose 3/8” TubeSAE 37° (JIC)
Female Swivel677.041.66 (2)
3/8” Hose 1/4” PipeMale Pipe Rigid
677.01.46 (2)
3/8” Hose 3/8” TubeInverted Male Swivel
677.011.66 (2)
1/2” Hose 1/2” TubeSAE 37° (JIC)
Female Swivel677.041.88 (2)
3/8” Hose 3/8” PipeMale Pipe Rigid
677.01.66 (2)
3/8” Hose 3/8” TubeSAE 45° Flare Male Rigid
677.03.66 (2)
1/2” Hose 1/2” TubeInverted Male Swivel
677.011.88 (2)
3/8” Hose 1/8” PipeMale Pipe Rigid 90° Elbow
677.044.62 (2)
3/8” Hose 1/4” Pipe Male Pipe Rigid 90° Elbow
677.044.64 (2)
1/2” Hose 3/8” PipeFemale Pipe
677.045.86 (2)
1/2” Hose 1/2” PipeFemale Pipe
677.045.88 (2)
3/8” Hose 3/8” TubeSAE 45° Flare
Female Swivel677.04.66 (2)
Drawer (Empty)953.924
Part No.971.6772
BARB-TITE 3/8” - 1/2” BRASS FITTINGS ASSORTMENT42 PCS
Contains: Z series hose endsSize Range: 1/4 - 1”
Bin Dimensions:33-3/4”W x 23-7/8”H x 12”DBin Part No. 953.540
This assortment also available without the bin under part no. 973.8976
WEATHERHEAD HYDRAULIC COLL-O-CRIMP Z SERIES ASSORTMENT155 PCS
Part No.972.8976
1/4” X 1/4” Male Pipe675.07.44 (3)
3/16” X 1/8” Male Pipe675.07.32 (3)
3/16” Hose Mender675.09.3 (4)
5/16” X 1/8” Male Pipe675.07.52 (3)
1/4” Hose Mender 675.09.4 (4)
5/16” X 1/4” Male Pipe675.07.54 (3)
3/8” X 1/8” Male Pipe675.07.62 (3)
1/2” x 3/8” Male Pipe675.07.86 (3)
3/8” X 1/4” Male Pipe675.07.64 (3)
3/4” Hose Mender675.09.12 (2)
5/16” Hose Mender675.09.5 (4)
3/8” Hose Mender675.09.6 (6)
1/2” x 1/4” Male Pipe675.07.84 (3)
1/2” Hose Mender675.09.8 (4)
5/8” Hose Mender675.09.10 (3)
7Service That Works... Products That Perform
ET4001
Part No. Description897.4001 ET4001 w/220V Pump
897.4006 ET4001 w/220V Pump and ET4001TP-1002
The ET4001 is ideal for factory, high-performance machine operations, construction and mine locations. This machine offers the capabilities of crimping all the crimp-style hose ends through -32. With this coverage, this heavy-duty crimper can handle all of your crimping needs.
Capabilities:• -4 (1/4”) thru -32 (2”) Braided Hose• -6 (3/8”) thru -32 (2”) Spiral Hose
Benefits:• Ideal for factory, construction and mine locations• Crimps up to 2” 6 wire spiral hose• Comes with high-efficiency PFTE grease
Features:• Shop/work table mount, positive stop• Features a two-stage pump providing
high-flow at low-pressure for fast ram approach and low-flow at high-pressure for actual crimping
4060 E Plano ParkwayPlano, Texas 75074800-527-4126www.winzer.comCopyright © 2020 Winzer
SERVICE TH
AT WO
RKS®
You can download and print this issue on our website, for free!www.winzer.com/resource_center Ed. 20 Vol. 4