Service Bodies - MnDOT...56" Single rear wheel application 39.5" high, 48-1/2" wide floor, 14" compartments, OA width 78.5" V- Style Compartments Lock bolt construction of side packs

Page 1 of 62

Vendor Name: Crysteel Truck EquipmentContact Person: Jim WyattStreet Address: 1130 73rd Ave NEP.O. Box:

City, State, Zip Fridley, MN 55432Phone #: 763-571-1902Toll Free #: 800-795-1280Fax #: 763-571-5091Email Address: [email protected]: www.crysteeltruck.com

Version of Excel used: Microsoft Excel 2010

2.0 UTILITY /SERVICE BODYMake StahlWarranty 5 yearDate & I.D. of Price List 10/5/2018Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE

DELIVERY STARTING POINT - City, State, Zip: Wooster, Ohio 44691Price per loaded mile for delivery $2.75

Delivery Time Frame in Calendar days ARO 7-210 Calendar Days ARO

Shop Rate per HourShop Rate for Mechanical Work per hour $90.00

Body Shop Rate per hour $90.00

*Note: The "Discount to be Applied to Price List" must be a numeric percentage. Not listing a numeric percentage may result in your bid being rejected.

Furnish separate price quote for: BODY COMPONENTS AND ATTACHMENTS FOR 6,000 TO 19,500 GVWR

Service Bodies

mailto:[email protected]

http://www.crysteeltruck.com/

Page 2 of 62

State of Minnesota Pricing Page

2.0 UTILITY / SERVICE BODY

Stahl Challenger Standard II 98" Model No. CST98VVS-48.5 56" Single rear wheel application39.5" high, 48-1/2" wide floor, 14" compartments, OA width 78.5"V- Style CompartmentsLock bolt construction of side packs to floor, floor understructure weldedAutomotive clip-on door seals in all compartmentGas shock door retainers on all full size vertical doors(2) adjustable trays w/dividers each front vertical compartment(1) adjustable tray with dividers for curb side horizontal(1) adjustable tray with dividers for each rear vertical compartment, Two point slam locking tailgateBolt on stainless steel concealed hinges, piano styleBolt on stainless steel (single point) T-handle latchesUniversal White ColorCompartment interiors painted whiteUndercoating on bottom of floor & wheel wells

Price $5,818.96Warranty 5 years

Date & I.D. of Price sheet N/A

Discount, if any, to be applied to price sheet N/A

Installation $978.29

Add for 98" body for Dual Rear Wheel $296.9456" CA, CST98VVD-52.5, PN 205783

Add for 110" body for Single Rear Wheel $498.4460" CA, CST110VVS-48.5, PN 205678

Add for 110" body for Dual Rear Wheel $774.1760" CA, CST110VVD-52.5, PN 205916

Add for 134" body for Dual Rear Wheel $2,121.0084" CA, CST134VVD-52.5, PN 206161(2nd vertical shelving same as front vertical)

To paint 98" bodies standard color $1,907.39

To paint 98" bodies Basecoat/Clearcoat $2,358.86





Page 3 of 62

Add for undercoat on 134" bodies $333.30

Add for off road mount kit 2006-2016 Ford 56" CA PN 184173 $182.41

Add for off road mount kit 2017-Current Ford 56" CA PN 229344 $182.41

Add for off road spring mount kit PN'S 171630, 209578, 182896 $220.58

Add for off road spring mount kit PN'S 189546-60CA $88.02

Add for off road spring mount kit PN'S 189546-84CA $162.26

Add for adapter plugs Ford box delete PN 153738 $33.94

Add for adapter plug Ram PN 153739 $33.94

Add for adapter plug for GM 2016 or newer PN 225425 $33.94

Add for (8) compartment dome lights w/switch $894.00& mounting bracket, wiring harness, switch installed, CST82", CST98", & CST110" Bodies PN 206566

Add for (1) compartment dome lights w/switch $110.29& (1) mounting bracket installed. No wiring harness.CST82", CST98", & CST110" Bodies PN SPL

Add for Circle Punched Recessed Bumper 78 1/4" $405.26non-lighted PN 230165



Add for LED surface mount light kit installed $317.09Under 80" LED light kit PN 230523

Add for LED surface mount light kit installed $422.08Over 80" LED light kit PN 230522

Add for GM 60" & 84" supplemental mounting kit PN 208481 $149.53

Add for RAM 60" & 84" supplemental mounting kit PN 184502 $118.78

Add for Ford 60" & 84" supplemental mounting kit PN 228813 $118.78

Add for (1) 3" high pullout drawer w/dividers for 98", 110" $320.27

& 134" bodies std 14" & 20" deep horizontal compartment installed

Add for Nested slide out trays-(4) 3" (1) 5" for 98", 110" $1,144.28& 132" bodies vertical compartment 14" and 20" deepset of (5) installed

Add for Nested slide out trays-(3) 3" (1) 5" for 98", 110" $1,070.04& 134" bodies vertical compartment 14" and 20" deepset of (4) installed

Page 4 of 62

Add for Over cab ladder rack, spans the load space, finish $798.56finish painted black-installed PN 230605-98

Add for Std Compartment top side mount ladder rack $590.70powder coated Universal White-installed PN 210577

Add for (4) 4" vent Louvers installed $93.32(must specify location) PN 170138

Add for curb side crane reinforcement 2000 lb. $1,291.69thru 4000lb capacity dual rear wheel CS RV installed

Add for Low Sliding roofs 98" bodies $1,684.07w/ 48-1/2" wide floor installed PN 207063painted standard color





Add for BC/CC paint for Low Sliding roofs for 98" bodies $129.28



Add for High roof, inside height-60", Body 98" long / 14" deep compartments 39.5" high / 48.5" floor installed $2,951.37






Add for High roof, inside height 74" installed $639.84

Add to paint High roof Standard Color $827.70

Page 5 of 62

Add to paint High roof basecoat/clearcoat $1,032.22

Add for Pipe vise bracket assembly (Bolt-on) for mounting $357.39on bumper riser, or rear end panel P/N's 226261 and 446

Add for aluminum fuel fill & gasket PN 171578 $38.18

Add for aluminum urea fill & gasket $38.18(2011-Current Ford Diesel Only) PN 221049

Add for supplemental fuel fill "DEF" bracket kit $69.99(2017-Current) Ford Diesel 60"CA Only Installed

American Eagle heavy duty steel drawer system consists of:telescoping top tray, 2.5" built-in risers, heavy duty 500 lb. ballbearing slides, key lockable chrome plated t-handle(s) withconcealed latching hardware, removable drawers, gray powdercoated front panels and galvanized components. Each drawer

includes front-to-back dividers. Lifetime warranty (original owner) onslides, handles, and latches.

15.32”H x 24”W x 14.75”D, 2-3” 1-5” Drawers $1,078.682.5” Riser, Std Top Tray

30.5”H x 24”W x 14.75”D, 3-3” 2-5” and 1-7” Drawers $1,789.222.5” Riser, Std Top Tray

Delivery Starting PointFridley, MN or Lake

Crystal, MN

Price Per loaded mile delivery charge $2.75

DELIVERY STARTING POINT - City, State, Zip: Fridley, MN or Lake Crystal, MN

Price per Loaded Mile for Delivery $2.75

Delivery Time Frame in Calendar Days ARO7-210 Calendar Days

ARO

Page 6 of 62

Service BodiesVendor Name: Crysteel Truck EquipmentContact Person: Jim WyattStreet Address: 1130 73rd Ave NEP.O. Box:



1.0 UTILITY /SERVICE BODYMake AstoriaWarranty 3 yearDate & I.D. of Price List 10/1/2018Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWED

DELIVERY STARTING POINT - City, State, Zip: Osceola, IAPrice per loaded mile for delivery $2.75

Delivery Time Frame in Calendar days ARO



*Note: The "Discount to be Applied to Price List" must be a numeric Not listing a numeric percentage may result in your bid being rejected.




Page 7 of 62


2.0 UTILITY / SERVICE BODY FIBERGLASS

Astoria FiberglassSingle rear wheel bodies 79" wide w/15" deep compartmentsDual rear wheel bodies 94" wide w/20" deep compartmentsBody lengths 96", 108", 132"-see model numbers39" high compartment on all standard bodies48" high compartment on all VT bodiesFive year warranty (limited)Molded fiberglass side compartmentsV- Style CompartmentsMolded Fiberglass side compartmentGelcost exterior finish(stock white)Fiberglass reinforced double laminated doorsHeavy duty strikers and Stainless Steel hingesAutomotive bulb door gasket seal12 ga steel smooth floor, primed with black gatorhyde finishUniversal steel structural body frame with rigid mounting kitFMVSS 108 lighting packageFlush mounted tail and back-up lightsCorrosion resistant fasteners, All self-locking nutsCompartment drainsStainless Steel rotary paddle latchesLicense plate bracket with light, Loomed wiring harnessExtruded aluminum drip rail, Fuel filler coneFull height fiberglass bulkhead between compartmentsNon skid finish on module tops, Louvered vents in each modulesDoor cable stops all door, Aluminum rock guards on front cornersAluminum trim on inside edge of moduleRubber fendersExterior steel parts finished with black gatorhyde finish

Warranty 6 year limited



Installation 972.76$

LGSRD-96-56-Single 39" high for single rear wheel 56" CA 12,714.43$

SL-96-56-Dual 48" high for dual rear wheel 56" CA 13,165.81$

LGSRD-108-60-Dual 39" high for single rear wheel 60" CA 12,885.04$

LGSRD-108-60-Single 39" high for dual rear wheel 60" CA 13,029.62$

SL-108-60-Dual 48" high for dual rear wheel 60" CA 14,693.74$

LGSNRD-132-84 39" 39" high for dual rear wheel 84" CA 15,559.79$

SL132-84-Dual 48" high for dual rear wheel 84" CA 18,311.15$

Add for Std Shelving package for 96" long bodies

Page 8 of 62

(2) Adjustable fiberglass shelf w/ removable 1,100.27$ dividers in each front vertical compartment(1) fixed fiberglass divider shelf in SS Horizontal only(1) Adjustable fiberglass shelf in each rear vertical compartment

Add for Std Shelving package for 108" length bodies(2) Adjustable fiberglass shelves w/ removable 1,100.27$ dividers in each front vertical compartment(1) Fixed fiberglass shelf w/ removable dividers street side horizontal compartment(1) Adjustable fiberglass shelf each rear compartment

Add for Std Shelving package for 132" length bodies(2) Adjustable fiberglass shelves in each 1,695.93$ front vertical compartment(2) Adjustable shelves in 2nd vertical compartment(1) Fixed shelf w/removable dividers in street side horizontal compartment(1) Adjustable fiberglass shelf each rear compartment

Vertical Compartment Shelving options:Add for 1 adjustable shelf w/ removable dividers 148.91$ Add for 2 adjustable shelf w/ removable dividers 297.84$ Add for 3 adjustable shelf w/ removable dividers 446.75$ Add for 4 adjustable shelf w/ removable dividers 595.68$

Add for aluminum pull out drawer on slides: 2"deep with dividers on 4" centers, sliders rated @100# at full extension (price per drawer) 253.01$

Horizontal Compartment Shelving options:Add for (1) fixed fiberglass shelf with removable 206.75$ Add for (1) divider tray on bottom of compartment 206.75$

Additional compartment shelving:Add for Hotstick door only 186.50$ Add for Hotstick door w/ thru shelf 503.15$ Add for full length fiberglass shelf 316.63$

Shelving Accessories:Add for rubber spaghetti matting (per shelf price) 14.46$ Add for 48" Steel material rail with (4) hooks 267.48$

Compartment Accessories:Add for locking swivel hooks (per hook) 37.59$ Add for LED Cargo area light/flush-mount 4" diameter 311.98$ Add for vent in back wall of compartment 92.53$ Add for Flexible tubular lighting (per compartment). Three sides of the compartment opening. 288.56$

3/16" Aluminum treadplate floor ILO steel 96" body 1,101.71$ 108" body 1,120.50$ 132" body 1,260.75$ (STD and Store N Tow)

3/16" Aluminum treadplate floor ILO steel

Page 9 of 62

96" body 1,101.71$ 108" body 1,120.50$ 132" body 1,260.75$ (VT Bodies)

Installation Parts:Four point spring mounting kit w/mid support tube 461.21$ Add for Astoria quick plug wiring adapter 192.30$

Gelcoat/PaintAdd for non stock white gelcoat96" body 1,454.49$ 108" body 1,636.66$ 132" body 1,999.56$ (All metal parts are black Gatorhyde finish)

Add for colored gelcoat charge other than white*Solid colors-No metallic or Pearl color, matches available*96" body 1,454.49$ 108" body 1,636.66$ 132" body 1,999.56$ (All metal parts are black Gatorhyde finish)

Exterior Body Accessories:Add for Spare Tire Mount 95.42$ Rubbermaid water cask holder 180.73$ Double overlapping door (132" bodies only) 261.69$ Add for Aluminum cone holder (vertical storage) 294.35$ Add for pipe vice table and rest 360.86$ Add for 48" Steel material rail and (6) hooks 307.96$ Add for Crane reinforcement for 25,000 ft.lb. 1,766.34$ installed in rear vertical compartmentAdd for Fiberglass roll top w/ double rear doors 2,096.42$ Add for fiberglass roll top w/ bi-fold flip-up rear door and tailgate 3,371.62$

Add for expanded metal aluminum shovel basket up to 132" long and 8" high657.85$

Add for punched aluminum shovel basket up to 132" long and 8" high 657.85$

Add for extra aluminum cast recessed fuel tank filler (required for dual tanks)24.58$

Add for Tie down loops in cargo area (each) 108.43$ Add for Oxygen/acetylene tank holder (each) 159.04$ Add for aluminum riser post for strobe (above cab level) 395.56$ Add for Aluminum expanded metal cab guard (headache rack with tube frame and screen

980.80$

Tailgates:Add for 10" Aluminum tailgate 537.84$ Add for 10" Steel tailgate (Black Gatorhyde finish) 682.42$

Bumpers:Add for steel treadplate, non-recessed, non-towing step bumper (Black Gatorhyde finish)

593.35$

Add for Aluminum Grip strut, non-recessed, non-towing step 885.40$ Add for Aluminum treadplate bumper non-recessed, non-towing step (Black Gatorhyde finish)

1,029.98$

Load bed and compartment tops:Add for 1/8" Aluminum treadplate on load walls96" LGS Body 824.11$

Page 10 of 62

96" SL Body 824.11$

Add for 1/8" Aluminum treadplate on load walls108" LGS Body 824.11$ 108" SL Body 824.11$

Add for 1/8" Aluminum treadplate on load walls132" LGS Body 824.11$ 132" SL Body 824.11$

Add for 1/8" Aluminum treadplate on compartment tops (both sides)96" Body 474.22$ 108" Body 500.24$ 132" Body 552.29$

Aluminum Treadplate Flip-top compartment:Add for Flip-top 96" body (per side) 818.33$ Add for Flip-top 108" body (per side) 818.33$ Add for Flip-top 132" body (per side) 818.33$

Hinges/Handles:Add for electric door locks (each door) operated w/ key FOB 530.87$ Stainless steel 3-point D-ring latch (price per door) 137.36$ Add for rod-lock system (per compartment) 43.37$

Transverse compartment and options:Add for Aluminum Treadplate Transverse 931.11$ Add for Transverse open to both sides(Steel and Aluminum only) 931.11$ Add for cage and one drawer pull one side (bed width) 789.42$ Add for cage and two drawers pull one side (bed width) 1,578.82$ Add for cage and three drawers, pull one side (bed width) 2,368.23$ Add for Divider for one way drawer(1 full length-bed width) 180.73$ Add for cage and one drawer pull both sides (bed width) 933.99$ Add for cage and two drawers pull both sides (bed width) 1,867.99$ Add for cage and three drawers, pull both sides (bed width) 2,801.97$ Add for cage and one drawer pull one side (full width) 789.42$ Add for cage and two drawers pull one side (full width) 1,578.82$ Add for cage and three drawers, pull one side (full width) 2,368.23$ Add for Divider for one way drawer(1 full length-full width) 180.73$ Add for cage and one drawer pull both sides (full width) 933.99$ Add for cage and two drawers pull both sides (full width) 1,867.99$ Add for cage and three drawers, pull both sides (full width) 2,801.97$ Add for fixed transverse shelf bed with only 225.54$ Add for fixed transverse shelf full width 225.54$

Ladder Racks:Add for bow ladder rack installed (Steel) 468.44$ Add for bow ladder rack installed (Aluminum) 550.85$ Add for side mount ladder rack installed (Steel) 400.49$ Add for 6" PVC tube installed with aluminum end caps 241.46$

Grab Handle:Add for grab handles installed (each) 112.78$ Add for cable stirrup step installed 296.39$ Add for 97 decibel back up alarm 65.39$ Add to undercoat 96" & 108" bodies 144.58$ Add to undercoat 132" bodies 144.58$ DEF fuel type fill, if required 65.06$

Page 11 of 62

American Eagle heavy duty steel drawer system consists of:telescoping top tray, 2.5" built-in risers, heavy duty 500 lb. ballbearing slides, key lockable chrome plated t-handle(s) withconcealed latching hardware, removable drawers, gray powdercoated front panels and galvanized components. Each drawerincludes front-to-back dividers. Lifetime warranty (original owner) onslides, handles, and latches.

15.32”H x 24”W x 14.75”D, 2-3” 1-5” Drawers 1,022.86$ 2.5” Riser, Std Top Tray

30.5”H x 24”W x 14.75”D, 3-3” 2-5” and 1-7” Drawers 1,676.72$ 2.5” Riser, Std Top Tray


Crystal, MN

Price Per loaded mile delivery charge 2.75$

Page 12 of 62

Service Bodies




1.0 UTILITY /SERVICE BODYMake FiberlineWarranty 3 yearDate & I.D. of Price List 9/25/2018Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included


DELIVERY STARTING POINT - City, State, Zip: Watertown, SD 57201Price per loaded mile for delivery $2.75








Page 13 of 62


1.0 UTILITY / SERVICE BODY FIBERGLASS

Fiberline Fiberglass1/8” Steel treadplate floor and bulkhead, primed and painted gloss black.Gelcoat finish to match standard chassis white.Molded fiberglass side packs.All interior fiberglass gelcoated white.Stainless steel paddle latches, all keyed alike.Fully adjustable door strikers with safety catch.Fiberline designed automotive style weather-strip.Aluminum treadbrite front rock guards.Stainless steel rear wheel well rock guards.Stainless steel HD hinges.All stainless steel bolts and self-locking nuts.Extruded aluminum drip rails above all side doors.Fiberglass bulkhead between compartments.Flush shock mounted exterior lights to meet FMVSS#108.Lighted license plate bracket.Loomed one piece wiring harness with molded plug.Floor drains in front and rear vertical compartments.Dual fuel recess molded into streetside side pack.12” Aluminum drop-down tailgate (40" high bodies only).Vents in each side pack.Cable door stops on all side doors.Non skid on tops of side packs.

Warranty 5 years




96"L x 79"W x 40"H (15" Deep Compartment) for single rear wheel 56" CA 6,758.57$

96"L x 94"W x 40"H (20" Deep Compartment) for dual rear wheel 56" CA 7,621.29$

96"L x 79"W x Up to 64"H (15" Deep Compartment) for single rear wheel 56" CA9,083.87$

96"L x 94"W x Up to 64"H (20" Deep Compartment) for dual rear wheel 56" CA 9,422.18$








Page 14 of 62


Add for Std Shelving package forall bodies up to 108" length:(2) Adjustable aluminum open shelves in each vertical front compartment 1,202.33$ (1) fixed aluminum shelf with removeable dividers in streetside horizontal compartment(1) Adjustable aluminum open shelf in each rear compartment

Add for Std Shelving package for all 132" length bodies:(2) Adjustable aluminum open shelves in each vertical front compartments 1,815.21$ (2) Adjustable aluminum open shelves in each 2nd vertical compartment(1) Fixed divider tray with removeable dividers in streetside horizontal compartment(1) Adjustable aluminum open shelf in each rear compartment

Vertical Compartment Shelving options:Add for 1 adjustable aluminum divider tray w/ removable dividers 260.25$ Add for 2 adjustable aluminum divider tray w/ removable dividers 460.63$ Add for 3 adjustable aluminum divider tray w/ removable dividers 658.42$

Add for aluminum pull out drawer on slides: 2" deep with dividers on 2" centers, Mounted on full extension Grant Slides must include price of fixed shelf for mounting

279.76$

Horizontal Compartment Shelving options:Add for (1) fixed aluminum shelf with removable 200.39$ Add for (1) fixed aluminum open shelf 130.12$

Add for aluminum pull out drawer on slides: 2" deep with dividers on 2" centers, Mounted on full extension Grant Slides must include price of fixed shelf for mounting

309.69$

Additional compartment shelving:Add for 8 drawer metal cabinet installed 286.27$ Add for 9 drawer metal cabinet installed 286.27$ Add for 6 drawer metal cabinet installed 251.14$ Add for 18 drawer metal cabinet installed 420.30$ Add for Hotstick door only 257.64$ Add for Hotstick door w/ full length fiberglass shelf 560.83$ Add for full length fiberglass shelf 265.45$ Add for pull out tool box tray (250# capacity) 897.85$

Compartment Accessories:Add for gas prop door shocks (per compartment) for vertical doors 88.48$ Add for locking swivel hooks (per hook) 39.04$ Add for fixed hook (per hook) 23.42$ Add for LED 3 light module lighting (per comp.) three sides of the compartment opening

219.02$

Body Components:1/8" aluminum tread plate floor and subframe in lieu of steel on 40" high bodies96" body 376.05$ 108" body 650.61$ 132" body 766.42$

1/8" aluminum tread plate floor and subframe in lieu of steel on 48" high bodies96" body 668.83$ 108" body 1,578.39$ 132" body 1,695.50$

Exterior Body Accessories:

Page 15 of 62

Add for pipe vice table and rest 382.98$ Add for Material rail and (6) hooks 502.27$ Add for Crane reinforcement for 25,000 ft.lb. installed in rear vertical compartment 1,957.05$ Add for Fiberglass sliding top w/ double rear doors 2,072.85$ Add for expanded metal aluminum shovel basket up to 132" long and 8" high 586.85$ Add for Oxygen/acetylene tank holder (each) 139.23$ Add for aluminum post for strobe (above cab top) 234.64$ Add for Aluminum expanded metal cab guard, tube frame with expanded metal 957.38$

Bumpers:Add for 8" non recessed steel treadplate bumper 561.11$ Add for 8" recessed steel treadplate bumper 623.57$ Add for 8" non recessed steel gripstrut bumper 667.81$ Add for 8" recessed steel gripstrut bumper 766.70$ Add for 8" non recessed aluminum Treade-Brite bumper 623.57$ Add for 8" recessed aluminum TreadeBrite bumper 686.03$ Add for stake pocket in any bumper for vice mount 109.30$

Load bed and compartment tops:Add for 1/8" Aluminum tread-brite on load walls96" Body with 35" or 40" high compartments 677.94$ 96" Body with High side 791.15$

Add for 1/8" Aluminum tread-brite on load walls108" Body with 40" high compartments 763.82$ 108" Body with 48" high compartments 1,145.08$

Add for 1/8" Aluminum tread-brite on load walls132" Body with 40" high compartments 1,039.68$ 132" Body with 48" high compartments 1,509.42$

Add for 1/8" Aluminum tread-brite on compartment tops (both sides)96" Body 677.94$ 108" Body 791.15$ 132" Body 1,039.68$

Fiberglass Flip-top compartment (w/ 3" deep divider tray):Add for Flip-top 96" body (per side) 1,094.33$ Add for Flip-top 108" body (per side) 1,094.33$

Hinges:Add for electric door locks, locks all doors w/ one FOB96" Body 1,753.59$ 108" Body 1,753.59$ 132" Body 2,262.37$

Hinges/HandlesStainless steel 3-point D-ring latch (per door) 106.70$

Add for gang-lock system 96" Body 789.84$ 108" Body 789.84$ 132" Body 1,051.39$

Transverse compartment and options:Add for Steel treadplate transverse open to one side 502.27$ Add for Aluminum Tread-brite Transverse open to one side 519.19$ Add for Transverse open to both sides (Steel and Aluminum only) 96.29$ Add for rack and one drawer-pull one side 2/3rds lenth 636.30$ Add for rack and two drawers-pull one side 2/3rds lenth 978.52$ Add for rack cage and three drawers, pull one side 2/3rd's length 1,158.09$

Page 16 of 62

Add for rack and one drawer pull both sides full length 671.43$ Add for rack and two drawers pull both sides full length 1,047.49$ Add for rack and three drawers, pull both sides full length 1,437.86$ Add for fixed transverse shelf, 2/3rd's length 279.76$ Add for fixed transverse shelf, full length 309.69$

Ladder and Pipe Rack:Add for bow ladder rack installed (steel) 528.30$ Add for bow ladder rack installed (aluminum) 784.64$ Add for side mount ladder rack installed (steel) 379.96$ Add for side mount ladder rack installed (aluminum) 590.76$ Add for horizontal ladder rack with roller (steel) 605.07$ Add for horizontal ladder rack with roller (aluminum) 710.47$ Add for slanted steel pipe rack 372.15$ Add for furnish and install aluminum pipe rack 372.15$

Grab HandleAdd for grab handles installed (each) 45.54$

Add for 97 decibel back up alarm 65.39$




Delivery Starting PointFridley, MN or

Lake Crystal, MN


Page 17 of 62

Service BodiesVendor Name: Crysteel Truck EquipmentContact Person: Jim WyattStreet Address: 1130 73rd Ave NEP.O. Box:



1.0 UTILITY /SERVICE BODYMake T.L. WoodsWarranty 3 yearDate & I.D. of Price List 9/27/2018Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included


DELIVERY STARTING POINT - City, State, Zip: Stewartville, MN Price per loaded mile for delivery $2.75








Page 18 of 62


1.0 UTILITY / SERVICE BODY ALUMINUM

TL Woods Standard 96UB Aluminum Service Body56" Single rear wheel application40" high, 48-1/2" wide floor, 15" compartmentsHigh Vertical Compartments front and rearQuick-mount mounting kitBody constructed of 1/8" smooth aluminumFrame is constructed on 3" channel, 12" on centerHorizontal compartments open(1) adjustable flat shelf each vertical compartmentTailgate included1/8" treadbrite floorStainless steel locks for securityAluminum finish inside and outsideRubber type weather stripping for sealStop/Turn/Tail & Back up lightsStandard bumper

Price 9,452.99$

Warranty 5 years




Add for 96" body for Dual Rear Wheel 56" CA 243.45$

Add for 108" body for Dual Rear Wheel 60" CA 1,235.60$

Add for 132" body for Dual Rear Wheel 84" CA 2,821.82$

Add for flip top per side 548.13$

Add for Aluminum fuel filler 182.87$

Add to undercoat 96" & 108" bodies 318.15$

Add to undercoat 132" bodies 369.28$

DEF fuel style fill, if required 120.63$

Page 19 of 62

American Eagle heavy duty steel drawer system consists of:telescoping top tray, 2.5" built-in risers, heavy duty 500 lb. ballbearing slides, key lockable chrome plated t-handle(s) withconcealed latching hardware, removable drawers, gray powdercoated front panels and galvanized components. Each drawerincludes front-to-back dividers. Lifetime warranty (original owner)on slides, handles, and latches.

15.32”H x 24”W x 14.75”D, 2-3” 1-5” Drawers $1,052.622.5” Riser, Std Top Tray

30.5”H x 24”W x 14.75”D, 3-3” 2-5” and 1-7” Drawers $1,734.792.5” Riser, Std Top Tray


Lake Crystal, MN

Price Per loaded mile delivery charge 2.75$ DELIVERY STARTING POINT - City, State, Zip: Fridley, MN or Lake

Crystal, MN

Page 20 of 62

Service Bodies




1.0 UTILITY /SERVICE BODYMake Monroe Custom BodiesWarranty 5 yearDate & I.D. of Price List 9/21/2018Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included


DELIVERY STARTING POINT - City, State, Zip: Greenfield, IN 46140Price per loaded mile for delivery $2.75







Page 21 of 62



MCB 96" Series Model SB96M 481656" Single rear wheel application42.5" high, 48-1/2" wide floor, 16" compartments, OA width 80-1/2"26" floor to top of compartment, 19" radius, 53" UCAStreet Side Compartments: 1st Vertical-32" wide x 42.5" high x 16" deep (1) Adjustable Divider Tray (1) Adjustable Shelf Horizontal-42" wide x 21" high x 16" deep (1) Fixed Shelf-Centered Rear Vertical-22" wide x 42.5" high x 16" deep (1) Adjustable Shelf (1) False Wall to protect lightsCurbside Compartments: 1st Vertical-32" wide x 42.5" high x 16" deep (1) Adjustable Divider Tray (1) Adjustable Shelf Horizontal-42" x 21" high x 16" deep (1) Fixed Divider Tray-Centered Rear Vertical-22" wide x 42.5" high x 16" deep (1) False Wall to protect lightsBody Construction-14 gauge GalvannealDrain Holes in bottoms of all compartmentsCompartment Tops-Smooth 14 gauge GalvannealLoadspace Walls-Smooth 14 gauge GalvannealBulkhead-14 gauge GalvannealWheel Panels-12 gauge GalvannealRubber Fenders-Shipped LooseFloor-12 gauge Galvanneal Treadplate Underframe-10 gauge Formed Channel-E-Z Mount(6) Body Doors-Double Panel Outers-14 gauge Galvanneal beveled edge design Inners-18 gauge Galvanneal Installed using hidden hinge system(6) Gasket-Clip on-Shipped loose(6) Rotary Paddle Handles-1 Point-Stainless Steel(4) Spring Hold Open/Restraints on Vertical Doors(4) Chains on Horizontal DoorsUndercoatingTailgate-12 gauge Galvanneal-Lift and Latch design, w/ support cables, and stainless pins and bracketsPrimer-Standard Urethane-White

Price 5,038.70$

Warranty 5 years




Page 22 of 62

Add for 96" body for Dual Rear Wheel 619.07$ 56" CA Model SB96M5320-DW

Add for 108" body for Single Rear Wheel 499.76$ 60" CA Model SB108M4816-SW

Add for 108" body for Dual Rear Wheel 815.26$ 60" CA Model SB108M5320-DW

Add for 132" body for Dual Rear Wheel 2,851.42$ 84" CA Model SB130M5320-DWIncludes 2nd Vertical w/(1) adj.divider tray & (1) adj. shelf/side

Add for 132" body for Dual Rear Wheel 3,535.44$ 84" CA Model SB130M5320H-DWIncludes 2nd Vertical w/(1) adj.divider tray & (1) adj. shelf/side48" high body

Add for 144" body for Dual Rear Wheel 4,560.15$ 102" CA Model SB144M5320HIncludes 2nd & 3rd Vertical w/(1) adj.divider tray & (1) adj. shelf/side48" high body



To paint 96" bodies standard color 1,864.08$

To paint 96" bodies Basecoat/Clearcoat 2,299.64$










Page 23 of 62



Add for undercoat 134" & 144" bodies 328.88$


Add for 12" high slam action tailgate ILO lift and latch 522.30$ Add for Treadplate Bumper 8" x 80-1/2" 347.31$ Add for Treadplate Bumper 8" x 93-1/2" 462.64$ Add for Grip Strut Bumper 9" x 80-1/2" 543.51$ Add for Grip Strut Bumper 9" x 93-1/2" 530.25$ Add for recess in Treadplate Bumper 119.31$ Add for recess in Grip Strut Bumper 174.98$

Add for Class IV Receiver hitch 12,000 lb. 274.22$ capacity 1801050L

Add for MCB platform Ext/Work Bench Bumper 2,315.87$ Notched for outriggers on both ends, thru box with verticalhinged doors, one on each end, 15" wide x full width, slamaction handles, single point, installed and painted

Add for (4) 4" HD Pull Out Trays 1,354.79$ 25.25" W x 13.75" D P/N 058-2B44

Add for (4) 4" HD Pull Out Trays 1,354.79$ 25.25" W x 17" D P/N 058-1B44

Add for (7) drawer combo cabinet, 25.25" W x 17" D x 37" H 2,455.06$ (2) 6" high, (2) 4" high, (3) 3" high, all drawers on 300 lb.Grant Slides, with dividers

Add for 9 drawer cabinets horizontal compartment 540.86$


Add for 18 drawer cabinets horizontal compartment 1,081.71$

Add for each grip strut folding steps installed at rear 429.50$

Add for each LED work light installed 102.22$

Add for Overhead ladder rack 8' plus 4' over hang 2,041.46$ 1.5" square x 1/8" with removable rear cross bar

Add for Ladder Rack 344.66$ Add for Rear sloping compartment top ladder rack ILO flat top ladder rack

39.77$

T-Top Enclosure: 54" high-48.5" floor width 96" long x 65.5" wide x 54" high I.D. (floor to roof) 2,671.13$ 108" long x 64.5" wide x 54" high I.D. (floor to roof) 2,998.56$ 132" long x 64.5" wide x 54" high I.D. (floor to roof) 3,718.38$

T-Top Enclosure: 54" high-53.5" floor width 96" long x 76.5" wide x 54" high I.D. (floor to roof) 2,986.63$

Page 24 of 62

108" long x 76.5" wide x 54" high I.D. (floor to roof) 3,261.04$ 132" long x 76.5" wide x 54" high I.D. (floor to roof) 4,374.56$



Roller Top-Galvanneal Steel-2 Section-48.5" wide floor 96" 1,193.06$ 108" 1,285.86$

Roller Top-Galvanneal Steel-2 Section-53.5" wide floor 96" 1,300.44$ 108" 1,338.88$

Roller Top-Galvanneal Steel-3 Section-53.5" wide floor 108" 1,972.53$ 132" 2,375.52$ 144" 2,631.37$ 154" 2,814.30$

Scorpion Line-16" wide compartment tops 96" 194.87$ 108" 237.29$ 132" 287.66$


Transverse Compartment-48.5" floor width 649.56$

Transverse Compartment-53.5" floor width 1,132.08$

Vise Bracket-#033-M002 444.08$

Add for Crane reinforcement 2000 lb. 1,638.47$ capacity for 96" Bodies SRW)

Add for Crane reinforcement 4000 lb. capacity 1,638.47$ 96" DRW (not available 96" SRW Bodies)

Add for Crane reinforcement 4000 lb. capacity 108" SRW 1,638.47$

Add for Crane reinforcement 4000 lb. capacity 108" DRW 1,638.47$




Page 25 of 62












Add for Fuel filler hole ONLY 45.07$

GM Underframe Mounting Kit 304.89$

DEF fuel type fill, if required 120.63$





Crystal, MN


Crystal, MN

Page 26 of 62



MCB 96" Series Model SB96M 4816-SS56" Single rear wheel application42.5" high, 48-1/2" wide floor, 16" compartments, OA width 80-1/2"26" floor to top of compartment, 19" radius, 53" UCAStreet Side Compartments: 1st Vertical-32" wide x 42.5" high x 16" deep (1) Adjustable Divider Tray (1) Adjustable Shelf Horizontal-42" wide x 21" high x 16" deep (1) Fixed Shelf-Centered Rear Vertical-22" wide x 42.5" high x 16" deep (1) Adjustable Shelf (1) False Wall to protect lightsCurbside Compartments: 1st Vertical-32" wide x 42.5" high x 16" deep (1) Adjustable Divider Tray (1) Adjustable Shelf Horizontal-42" x 21" high x 16" deep (1) Fixed Divider Tray-Centered Rear Vertical-22" wide x 42.5" high x 16" deep (1) False Wall to protect lightsBody Construction-14 gauge 304 Stainless SteelAll Interior Components are Galvanneal Steel-Shelving & PartitionsDrain Holes in bottoms of all compartmentsCompartment Tops-Smooth 14 gauge 304 Stainless SteelLoadspace Walls-Smooth 14 gauge 304 Stainless SteelBulkhead-14 gauge 304 Stainless SteelWheel Panels-12 gauge 304 Stainless SteelRubber Fenders-Shipped LooseFloor-12 gauge 304 Stainless Steel Underframe-Stainless 10 gauge Formed Channel-E-Z Mount(6) Body Doors-Double Panel Outers-14 gauge 304 Stainless Steel beveled edge design Inners-20 gauge 304 Stainless Steel Installed using hidden hinge system(6) Gasket-Clip on-Shipped loose(6) Rotary Paddle Handles-1 Point-Stainless Steel(4) Spring Hold Open/Restraints on Vertical Doors(4) Chains on Horizontal DoorsUndercoatingTailgate-14 gauge 304 Stainless Steel-Lift and Latch design, w/ support cables, and stainless pins and bracketsPrimer-Standard Urethane-White

Price 9,590.90$

Warranty -- 5 years for hinges, latches, and rust through




Page 27 of 62

Add for 96" body for Dual Rear Wheel 1,206.32$ 56" CA Model SB96M5320-SS DW

Add for 108" body for Single Rear Wheel 974.33$ 60" CA Model SB108M4816-SS SW

Add for 108" body for Dual Rear Wheel 1,589.42$ 60" CA Model SB108M5320-SS DW

Add for 132" body for Dual Rear Wheel 5,615.35$ 84" CA Model SB132M5320-SS DWIncludes 2nd Vertical w/(1) adj.divider tray & (1) adj. shelf/side

Add for 132" body for Dual Rear Wheel 6,693.08$ 84" CA Model SB132M5320H48-SS DWIncludes 2nd Vertical w/(1) adj.divider tray & (1) adj. shelf/side48" high body

Add for 144" body for Dual Rear Wheel 8,633.80$ 102" CA Model SB144M5320H48-SS DWIncludes 2nd & 3rd Vertical w/(1) adj.divider tray & (1) adj. shelf/side48" high body













Page 28 of 62






Add for Stainless Steel 12" high slam action tailgate ILO lift and latch

1,019.41$

Add for Stainless Treadplate Bumper 8" x 80-1/2" 609.79$ Add for Stainelss Treadplate Bumper 8" x 93-1/2" 902.75$ Add for Stainless Grip Strut Bumper 9" x 80-1/2" 1,060.50$ Add for Stainless Grip Strut Bumper 9" x 93-1/2" 1,150.64$ Add for recess in Stainless Treadplate Bumper 231.98$ Add for recess in Stainless Grip Strut Bumper 340.69$


Add for Stainless MCB platform Ext/Work Bench Bumper 4,063.04$ Notched for outriggers on both ends, thru box with verticalhinged doors, one on each end, 15" wide x full width, slamaction handles, single point, installed and painted


Add for (4) 4" HD Pull Out Trays 1,354.79$ 25.25" W x 17" D P/N 058-1B44




Add for each grip strut folding steps installed at rear 429.50$


Add for Overhead ladder rack 8' plus 4' over hang 3,980.85$

1.5" square x 1/8" 304 Stainless Steel with removable rear cross bar

Add for Stainless Ladder Rack 672.09$ Add for Stainless Steel Rear sloping compartment top ladder rack ILO

78.21$

flat top ladder rack


T-Top Enclosure: 54" high-53.5" floor width 96" long x 76.5" wide x 54" high I.D. (floor to roof) 5,823.47$

Page 29 of 62

108" long x 76.5" wide x 54" high I.D. (floor to roof) 6,357.70$ 132" long x 76.5" wide x 54" high I.D. (floor to roof) 8,530.40$



Roller Top-Stainless Steel-2 Section-48.5" wide floor 96" 2,326.47$ 108" 2,508.08$

Roller Top-Stainless Steel-2 Section-53.5" wide floor 96" 2,534.60$ 108" 2,611.48$

Roller Top-Stainless Steel-3 Section-53.5" wide floor 108" 3,846.96$ 132" 4,633.06$ 144" 5,130.17$ 154" 5,488.09$













Page 30 of 62






Lake Crystal, MN


Crystal, MN

Page 31 of 62



MCB 96" Series Model SB96M 4816-AL56" Single rear wheel application42.5" high, 48-1/2" wide floor, 16" compartments, OA width 80-1/2"26" floor to top of compartment, 19" radius, 53" UCAStreet Side Compartments: 1st Vertical-32" wide x 42.5" high x 16" deep (1) Adjustable Divider Tray (1) Adjustable Shelf Horizontal-42" wide x 21" high x 16" deep (1) Fixed Shelf-Centered Rear Vertical-22" wide x 42.5" high x 16" deep (1) Adjustable Shelf (1) False Wall to protect lightsCurbside Compartments: 1st Vertical-32" wide x 42.5" high x 16" deep (1) Adjustable Divider Tray (1) Adjustable Shelf Horizontal-42" x 21" high x 16" deep (1) Fixed Divider Tray-Centered Rear Vertical-22" wide x 42.5" high x 16" deep (1) False Wall to protect lightsBody Construction-.125 3003 H14 AluminumDrain Holes in bottoms of all compartmentsCompartment Tops-.125 3003 H14 AluminumLoadspace Walls-.125 3003 H14 AluminumBulkhead-.125 3003 H14 AluminumWheel Panels-.125 3003 H14 AluminumRubber Fenders-Shipped LooseFloor-.125 6061 T6 Aluminum Treadplate Underframe-Aluminum 6061 T6 Structural Channel(6) Body Doors-Double Panel Outers-.125 Aluminum beveled edge design Inners-.090 Aluminum Installed using hidden hinge system(6) Gasket-Clip on-Shipped loose(6) Rotary Paddle Handles-1 Point-Stainless Steel(4) Spring Hold Open/Restraints on Vertical Doors(4) Chains on Horizontal DoorsUndercoatingTailgate-.125 3003 H14 Aluminum-Lift and Latch design, w/ support cables, and stainless pins and bracketsPrimer-Standard Urethane-White

11,172.37$

Warranty- 5 years for hinges, latches, and rust through




Page 32 of 62

Add for 96" body for Dual Rear Wheel 1,410.47$ 56" CA Model SB96M5320-AL DW

Add for 108" body for Single Rear Wheel 1,140.04$ 60" CA Model SB108M4816-AL SW

Add for 108" body for Dual Rear Wheel 1,858.53$ 60" CA Model SB108M5320-AL DW

Add for 132" body for Dual Rear Wheel 6,565.82$ 84" CA Model SB132M5320-AL DWIncludes 2nd Vertical w/(1) adj.divider tray & (1) adj. shelf/side
















Add for Aluminum 12" high slam action tailgate ILO lift and latch 1,191.74$ Add for Aluminum Treadplate Bumper 8" x 80-1/2" 713.19$ Add for Aluminum Treadplate Bumper 8" x 93-1/2" 1,055.20$ Add for Aluminum Grip Strut Bumper 9" x 80-1/2" 1,239.46$ Add for Aluminum Grip Strut Bumper 9" x 93-1/2" 1,345.51$ Add for recess in Aluminum Treadplate Bumper 270.43$ Add for recess in Aluminum Grip Strut Bumper 399.01$



Add for (4) 4" HD Pull Out Trays 1,354.79$

Page 33 of 62

25.25" W x 17" D P/N 058-1B44





Add for Overhead ladder rack 8' plus 4' over hang 4,654.27$ 1.5" square x 1/8" Aluminum with removable rear cross bar

Add for Aluminum Ladder Rack 786.10$ Add for Rear sloping compartment top ladder rack ILO flat top ladder rack

90.14$





Roller Top-Aluminum-2 Section-48.5" wide floor 96" 2,721.51$ 108" 2,932.28$

Roller Top-Aluminum-2 Section-53.5" wide floor 96" 2,964.10$ 108" 3,054.24$

Roller Top-Aluminum-3 Section-53.5" wide floor 108" 4,497.85$ 132" 5,416.50$ 144" 5,998.45$ 154" 6,416.03$


Scorpion Line-20" wide compartment tops 96" 221.38$ 108" 258.50$

Page 34 of 62

132" 320.80$
















Lake Crystal, MN


Crystal, MN

Page 35 of 62

Service Bodies




2.0 UTILITY /SERVICE BODYMake Dakota BodiesWarranty 6 year steel, 10 year SS & aluminumDate & I.D. of Price List 9/28/2018Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0

See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included


DELIVERY STARTING POINT - City, State, Zip: Watertown, SD 57201Price per loaded mile for delivery $2.75








Page 36 of 62



Dakota Steel 98" SRW Service Body SBG9878VVSS98 inches long x 40 inches high x 78 inches widePick-Up Box Removal cab to axle (CA) of 56 inches with single rear wheel axle.Body Dimensions:40 Inches - Compartment height14.25 Inches - Compartment depth49.25 Inches - Load space width23 Inches - Top of body to the top of the floor17 Inches - Horizontal compartment heightBody Materials:16 gauge galvanneal. - Main body material.125 Aluminum Tread-Brite - Compartment tops18 gauge galvanneal - Inner door panels18 gauge galvanneal - Outer door panels - 5/16" Stainless Steel continuous rod - Door Hinge Rod. - Stainless Steel - Door Hinge Sockets.16 gauge galvanneal - Wheel Panels - "Removable for ease of replacement"16 gauge galvanneal - Front bulkhead 18 gauge galvanized - Shelving installed on Uni-Strut for infinate adjustment.Body Floor and Understructure: - 12ga Galvanneal - FloorAccessories: - Stainless Steel automotive rotary type door latches. Stud mounted latches have hidden fasteners inside the door. Adjustable striker brackets wrap around the weatherstrip. Stud mounted automotive style latches have interior plastic latch covers. - Gas cylinder type door holders on vertically hinged doors and chain stops on horizontal compartments. - Service Body Rubber rolled crown type fenders. (Installed w/ wheel cut-outs) - Fuel filler cut out in wheel panel, streetside. Optional mounting kit will need to be selected to receive fuel cup. - Automotive bulb type weatherstripping mechanically fastened to door frame with rounded corners.Paint: - Powder Coated "DBI White" exterior and interior of body. - Rubberized Protective UndercoatingStreetside Compartmentation:"V" Style1st Vertical:33" Wide x 40" High x 14.25" Deep - Two (2) adjustable shelves each with divider slots on 2" centers installed on Uni-strut each shelf will have two (2) adjustable dividers.Horizontal Compartment:43" Wide x 17" High x 14.25" Deep - Open compartment. - Notch out for "Pass Through" long storage to rear vertical.Rear Vertical:22" Wide x 40" High x 14.25" Deep

Page 37 of 62

- One (1) adjustable shelf with divider slots on 2" centers installed on Uni-strut each shelf will have two (2) adjustable dividers.Curbside Compartmentation:"V" Style1st Vertical:33" Wide x 40" High x 14.25" Deep - Two (2) adjustable shelves each with divider slots on 2" centers installed on Uni-strut each shelf will have two (2) adjustable dividers.Horizontal Compartment:43" Wide x 17" High x 14.25" Deep - Open compartment. - Notch out for "Pass Through" long storage to rear vertical.Rear Vertical:22" Wide x 40" High x 14.25" Deep - One (1) adjustable shelf with divider slots on 2" centers installed on Uni-strut each shelf will have two (2) adjustable dividers.Bumper: - "Crash Zone" Style recessed rear bumper. - Bumper and riser to be Powder Coated with "Black Lava" powder.Service Body Lighting Kit Installed In Bumper: - Rubber mounted recessed rear lighting kit with harness - Installed - Two (2) Red Oval S/T/T lights - Two (2) Oval Clear back-up lights - Two (2) Red side 3/4" button Style clearance lights - Tec-Niq Brand - Two (2) Red side reflectors - Grote Brand - Two (2) Red rear reflectors - Grote Brand - Two (2) License plate lights installed in bumper. - Component Body wiring harness. Optional adapter will need to be selected for chassis "Plug and Play".Vise Socket: - Receiver built into rear bumper for the use of a vise.Tailgate: - Hinged tailgate 12" high X full width of bed area installed at rear of load space.

Price 6,023.64$

Warranty - 5 yrs. for hinges, latches, rust through



Installation 1,174.13$

Add for a 98" SB DRW--56" CA Service Body 441.43$

Add for a 110" SB DRW--56" CA Service Body 481.20$

Add for a 132" SB DRW--84" CA Service Body 2,057.37$

Add for a 132" LB DRW--84" CA Line Body 2,380.82$



Page 38 of 62






Add for undercoat 132" bodies 328.88$

Add for Aluminum Body Materials 98" 1,517.84$

Add for Aluminum Body Materials 110" 1,744.52$

Add for Aluminum Body Materials 132"/133" 1,918.18$

Add for Master door lock, hook and loop system on each door w/ two 258.50$ spring loaded door handles in the unlocked position

Add for Standard rope lights (3/8" LED 1" on center) compartment lights in

291.64$

all body components P/N CBROPELIGHTKIT

Add for 1st Vertical Equipto Drawer Set P/N CB941VEQKIT 424.20$

Add for Horizontal Equipto Drawer Set P/N Equipto Kit 424.20$

Add for Angled Ladder Rack Streetside 278.38$

Add for Angled Ladder Rack Curbside 278.38$

High Roof Top (Superstructure) Option #1 3,532.79$ - Interior minimum clear height is 56 Inches. - One (1) fixed shelf installed on the Streetside above the compartment tops. - One (1) fixed shelf installed on the Curbside above the compartment tops.- Barn type rear access doors for superstructure. - Two point lever style lockable (different from compartment doors) with internal handle and cover. - Gas Cylinder door holders on the rear barn type doors. - Strap hinges on barn doors. - Automotive Bulb Type Weatherstripping mechanically fastened to door frame with rounded corners.

High Roof Top (Superstructure) Option #2 5,432.41$ - Interior minimum clear height is 72 Inches. ( ) compartment tops. tops.- Barn type rear access doors for superstructure. - Two point lever style lockable (different from compartment doors) with internal handle and cover. - Gas Cylinder door holders on the rear barn type doors.

- Strap hinges on barn doors. - Automotive Bulb Type Weatherstripping mechanically fastened to door frame with rounded corners.

Add to paint Highroof Standard Color 798.53$

Page 39 of 62

Add to paint Highroof basecoat/clearcoat 996.43$

Add for Flip Tops SRW 98" Body 662.81$

Add for Flip Tops DRW 98" Body 795.38$

Add for Flip Tops 110" Body 795.38$

Add for Flip Tops 132"/133" Body 927.94$

Sliding Top: 2,903.12$ - Two section sliding roof installed over bed area. - Flip up end gate.

Transverse: 1,896.97$ - Transverse compartment - One side only - Transverse compartment through to both sides

Non-Slip on Compartment tops 510.37$ - Raptor liner on compartment tops

Add for 3,000 lb. Crane Reinforcement 1,479.40$

Add for 3,500-6,000 lb. Crane Reinforcement 1,747.17$








Crystal, MN


Crystal, MN

Page 40 of 62

Service Bodies




2.0 UTILITY /SERVICE BODYMake Liftmoore BodiesWarranty 6 years for rust throughDate & I.D. of Price List 9/19/2018Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE

DELIVERY STARTING POINT - City, State, Zip: Houston, TXPrice per loaded mile for delivery $2.75





Furnish separate price quote for: BODY COMPONENTS AND ATTACHMENTS FOR 6,000 TO



Page 41 of 62



Liftmoore Crane Body LM-CB-110240,000 ft.-lbs. crane ready service body for 84" CA chassis, 132" long, 94" wide, 44" high, with a22" compartment depth, 50" load area, and 27" floor line. 63" tall front compartment with holder for 2 bottles12 gauge galvanneal front, rear, and bottom compartment panels12 gauge tread plate compartment tops, load area walls and front bulkheadFenders, door facings, and tailgate are 14 gauge A40 galvanneal steelHoles for recess lights punched high in rear panel and in crane support box with additional support platesInterior support for underside of boom support mounting1/8" medium pattern tread plate floor with reinforced understructure6 Tie-down rings, floor mounted, folding recessed, capacity 2,000 lbs. eachFront, rear, and rear extension cross members 5" x 3" x 3/16" rectangular tubing5" high 3/16" formed intermediate cross members5" high 6.7# structural steel front extension cross members3 full length formed 12 gauge steel "C" channel longitudinals1/2" steel flat bar long runnersAutomotive grade undercoatingDouble panel doors with 14 gauge galvanneal steel outer panel and 18 gauge corrugated inner panel

Door design includes a knife edge for continuous positive contact with the door sealStainless steel 3 point D-Ring latch assemblyStainless steel 5/16" diameter rod hinge pins, stainless steel pillow block hinges, self-lubricating plastic bushings

Spring loaded door retainers on vertical doors, chain supports on horizontal doorsMaster lock, spring loaded return to the open positionSlam latch tailgate with 12 gauge tread plate overlay and center release stainless latchAdjustable shelving - 3 vertical compartments and 2 horizontal compartments with 15 dividers, all galvanneal steelDrawer unit - 31" tall, 34" wide 20" deep - 2 each 3", 6", 9" - Compartment behind driver with dividers. Capacity 250 lbs. eachLED light kit - tail and clearance lights (shipped loose for installation after paint)Rubber roll crown fenders (shipped loose for installation after paint)Door seal, automotive type square bulb EPDM (shipped loose for installation after paint)Floor drain plugs (shipped loose for installation after paint)

NOT INCLUDED AND REQUIRED:CraneOutriggers or jack standsHydraulic reservoir and hoses for hydraulic crane and outriggersTail shelf/bumperBoom restPump and PTO for hydraulic power supplyWiring adapter specific to chassis manufacturerMounting kit specific to chassis manufacturerHoles for mounting bolts of craneMounting bolts for Liftmoore Model 5000, 2550, 3055, 6036, 3660, or 4064 (PN 28440)Holes and kit for fuel fill and DEF when requiredTop coat paint

Page 42 of 62

Price 20,672.68$

Warranty1 year, 6 years rust

through






Add for undercoat on 132" bodies 333.30$

Add Tail shelf, 8" Step Pintle Recess LM-ACCY-1019 3,328.56$

Add Service body mounting kit 40k LM-ACCY-1018 509.04$ Ford F-550/Ram 5500 84CA-132"

Add Service body mounting kit 40k LM-ACCY-1033 509.04$ Ram 5500 84CA-132"

Add wiring adapter kit Ford SD LM-ACY-1021 59.39$ Use with LM-ACCY-1022

Add wiring adapter kit Ford SD RK LM-ACY-1022 80.60$ Use with LM-ACCY-1021

Add wiring adapter kit Dodge SD RK LM-ACCY-1031 59.39$ Use with LM-ACCY-1022

Add Kit, Mounting Crane 0.875" Bolt 28440 46.94$ 5000/2550/3055/6036/3660/4064




DELIVERY STARTING POINT - City, State, Zip:Fridley, MN or

Lake Crystal, MN


Page 43 of 62



Liftmoore Crane Body LM-CB-1117LM-CB-1102 LM-ACCY-1019 - See accessories page for detailsOutrigger - Manual 36" out curbside, 12" streetside manual crank down jacksCrankdown Jacks shipped loose - to be welded in at an appropriate height as neededLED light kit - tail and clearance lightsRubber roll crown fendersDoor seal, automotive type square bulb EPDMFloor drain plugs

NOT INCLUDED AND REQUIRED:CraneMounting bolts for Liftmoore Model 5000, 2550, 3055, 6036, 3660, or 4064 (PN 28440). Mounting holes for crane machined at no chargeBoom Rest for craneA Liftmoore boom rest purchased with the body will be installed at no chargeWiring adapter specific to chassis manufacturerMounting kit specific to chassis manufacturerHoles and kit for fuel fill and DEF when requiredTop coat paintAny provision for hydraulicsAuxiliary batteries when required

Price 26,159.00$


through












Page 44 of 62







Lake Crystal, MN


Page 45 of 62



Liftmoore Crane Body LM-CB-1105LM-CB-1102LM-ACCY-1019Outrigger - Hydraulic 42" out & down curbside, hydraulic down only outrigger streetside, cylinders installedValves mountedDiverter for outrigger and craneLever controls for outriggerFlow control for outriggerBoom rest installed for Model 2550, 3055, 3660, or 4064Hydraulic installation kitReservoir, hydraulic oil 25 gallon capacity mounted in the cargo area at front of bodyFilter, oil return line - installed at reservoirCutoff valve, inlineHose from outrigger to crane compartment, installedHose from crane compartment to front of body, installedMounting holes for craneLED light kit - tail and clearance lightsRubber roll crown fendersDoor seal, automotive type square bulb EPDMFloor drain plugs

NOT INCLUDED AND REQUIRED:CranePump and PTO for hydraulic power supply - see chassis manufacturer's and crane's requirementsHose from reservoir to pumpHose from pump to front of bodyWiring adapter specific to chassis manufacturerMounting kit specific to chassis manufacturerMounting bolts for Liftmoore Model 5000, 2550, 3055, 6036, 3660, or 4064 (PN 28440)Holes and kit for fuel fill and DEF when requiredTop coat paint

Price 34,289.50$


through








Page 46 of 62











Lake Crystal, MN


Page 47 of 62



Liftmoore Crane Body LM-CB-1106LM-CB-1105Top coat paint, Liftmoore white on the body, outriggers, tail shelf, and inside compartmentsInstall Rear mount LED light kit - tail and clearance lightsInstall Rubber roll crown fendersInstall Door gasketInstall Floor drain plugs

NOT INCLUDED AND REQUIRED:CranePump and PTO for hydraulic power supply - see chassis manufacturer's and crane's requirementsHose from reservoir to pumpHose from pump to front of bodyWiring adapter specific to chassis manufacturerMounting kit specific to chassis manufacturerMounting bolts for Liftmoore Model 5000, 2550, 3055, 6036, 3660, or 4064 (PN 28440)Holes and kit for fuel fill and DEF when required

Price 37,824.50$

Warranty1 year, 6 years rust through













Page 48 of 62






Lake Crystal, MN


Page 49 of 62

Service Bodies




1.0 UTILITY /SERVICE BODYMake Venco VenturoWarranty 6 yearsDate & I.D. of Price List 10/2/2018Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included


DELIVERY STARTING POINT - City, State, Zip: Cincinnati, OH 45241Price per loaded mile for delivery $2.75




*Note: The "Discount to be Applied to Price List" must be a numeric percentage. Not listing a numeric percentage may result in your bid being rejected. .




Page 50 of 62



Venco Venturo HT25 Crane Body (60" CA)HT25-107-FLT-WBBFlat cabinets all around19" Work Bench Bumper Has vise plate on curbside/underneath through storage w/ locked hinged doors on each sideStandard 11 shelf package multi-height adjustable uni-strut shelvesIntegral crane reinforcement up to 25,000 lbs.44" compartment height50" flat cargo floor22" compartment depthadjustable uni-strut shelf strips(6) HD tie downsThree point keyed-alike "T" handle door locksAutomotive weather-tight door seals1/8" treadplate floor14 gauge treadplate on all sides of cargo area and top of compartmentsFull undercoating, epoxy primer and mud flaps

Price 20,619.94$

Warranty 6 years




Add for HT25-107-TFC-WBB 807.25$ Same as HT25-107-FLT except with 62" tallcurbside front compartment

Add for HT25-131-FLT-WBB 1,404.53$ Same as HT25-107-TFC except for 84" CA

Add for HT25-131-TFC-WBB 2,216.45$ Same as HT25-131-FLT except with 62" tallcurbside front compartment

Add for HT25-131-DTF-WBB 3,173.02$ Same as HT25-131-FLT except with 62" tallcurbside and streetside front compartments





Add for Oxygen-Acetylene bottle holders kit, 237.98$ vented doors, etc.

Page 51 of 62

Add for LED single rope light kit-factory 1,413.86$ installed all cabinets

Add for 20" Grip Strut Step-set-one each side 527.28$

Add for Master Lock System-1 handle locks 1,059.23$ each side

American Eagle heavy duty steel drawer system consists of:telescoping top tray, 2.5" built-in risers, heavy duty 500 lb. ballbearing slides, key lockable chrome plated t-handle(s) withconcealed latching hardware, removable drawers, gray powdercoated front panels and galvanized components. Each drawer

includes front-to-back dividers. Lifetime warranty (original owner) onslides, handles, and latches.




Price per loaded mile for delivery $2.75

Delivery Time Frame in calendar days ARO7-210 Calendar Days

ARO

Page 52 of 62



Venco Venturo HT40 Crane Bodies (84" CA)HT40-131-FLT-WBBFlat cabinets all around19" Work Bench BumperHas vise plate on curbside/underneath through storage w/ locking hinged doors one ach sideStandard 11 shelf package multi-height adjustable uni-strut shelvesIntegral crane reinforcement up to 40,000 lbs.44" compartment height50" flat cargo floor22" compartment depthAdjustable uni-strut shelf strips(6) HD tie downsThree point keyed-alike "T" handle door locksAutomotive weather-tight door seals1/8" treadplate floor1/8" treadplate on all sides of cargo area and top of compartmentsFull undercoating, epoxy primer and mud flaps

Price 22,421.09$

Warranty 6 years




Add for HT40-131-TFC-WBB 793.25$

Same as HT40-131-FLT except with 62" tall curbside front compartment

Add for HT40-131-DTF-WBB 1,712.50$ Same as HT40-131-FLT except with 62" tallcurbside and streetside front compartments




Add for LED single rope light kit-factory 1,413.86$ installed all cabinets

Add for 20" Grip Strut Step-set-one each side 527.28$

Add for Master Lock System-1 handle locks 1,059.23$ each side

American Eagle heavy duty steel drawer system consists of:telescoping top tray, 2.5" built-in risers, heavy duty 500 lb. ball

Page 53 of 62

bearing slides, key lockable chrome plated t-handle(s) withconcealed latching hardware, removable drawers, gray powdercoated front panels and galvanized components. Each drawerincludes front-to-back dividers. Lifetime warranty (original owner) onslides, handles, and latches.




Price per loaded mile for delivery $2.75

Delivery Time Frame in Calendar days ARO7-210 Calendar Days ARO

Page 54 of 62



Venco Venturo HT50 Crane Bodies (84" CA)HT50-131-FLT-WBBFlat cabinets all around24" Work Bench Bumper Has vise plate on curbside/underneath through storage w/ locking hinged doors on each sideStandard 11 shelf package multi-height adjustable uni-strut shelvesIntegral crane reinforcement up to 50,000 lbs.50" compartment height50" flat cargo floor22" compartment depthAdjustable uni-strut shelf strips(6) HD tie downsThree point keyed-alike "T" handle door locksAutomotive weather-tight door seals1/8" treadplate floor1/8" treadplate on all sides of cargo area and top of compartmentsFull undercoating, epoxy primer and mud flaps

Price 23,788.29$

Warranty 6 years




Add for HT50-131-TFC-WBB curbside front compartment 615.94$

Add for HT50-131-DTF-WBB 1,455.85$ Same as HT50-131-FLT except with 62" tall curbside and streetside front compartments

Add for HT50-163-TFC-WBB 4,194.91$ 120" CA with 62" tall curbside front compartments15 Shelf package

Add for HT50-163-DTF-WBB 5,036.00$ 120" CA with 62" tall curbside and streetside front compartments15 Shelf Package





Add for Oxygen-Acetylene bottle holders kit, vented doors, etc. 237.98$

Page 55 of 62

Add for LED single rope light kit, factory installed all cabinets for 120" CA 2,076.46$

Add for LED single rope light kit, factory installed all cabinets for 84" CA 1,413.86$

Add for 20" Grip Strut Step, set, 1 handle locks each side 527.28$

Master Lock System, 1 handle locks each side for 84" CA 1,059.23$

Master Lock System, 1 handle locks each side for 120" CA 2,118.45$




Page 56 of 62



Venco Venturo HT66 Crane Bodies (120" CA)* HT66-163-DTF-WBB * Double tall freight cabinets* Standard 15 shelf package multi-height adjustable uni-strut shelves* Integral crane reinforcement up to 66,000 lbs.* 62" tall compartments* pre-stamped louvered doors for bottle compartment* 50" flat cargo floor* 22" compartment depth* Adjustable uni-strut shelf strips* (8) HD tie downs* Three point keyed-alike premium ergonomic compression door handles w/

built-in key cylinder covers* Automotive weather-tight door seals* 1/8" treadplate floor* 1/8" treadplate on all sides of cargo area and top of compartments* Full undercoating, epoxy primer and mud flaps* Work bench bumper w/ vise plate, pass through storage area and hinged

doors

Price 33,321.33$

Warranty 6 years




Add for HT66-132-DTF-WBB 1,502.52$ Same as HT66-132-DTF except for 62" tallcompartments, only (6) HD tie downs and84" CA




Add for LED single rope light kit, factory 2,076.46$ installed all cabinets for 120" CA

Add for LED single rope light kit, factory 1,413.86$ installed all cabinets for 84" CA

Add for 20" Grip Strut Step, set, 1 handle 527.28$ locks each side

Master Lock System, 1 handle locks each 1,059.23$ side for 84" CA

Master Lock System, 1 handle locks each 2,118.45$

Page 57 of 62

side for 120" CA





Price per loaded mile for delivery $2.75Delivery Time Frame in Calendar days ARO 7-210 Calendar Days ARO

Page 58 of 62

Service Bodies




1.0 UTILITY /SERVICE BODYMake Hughes EquipmentWarranty 5 yearsDate & I.D. of Price List 10/9/2018Discount to be applied to Price List* (see note below) 0%Installation of Utility/Service Body as per MN DOT spec 1.0 See PricingPrice of FMVSS 108 lighting package IncludedPrice of ICC bumper under ride protection IncludedInstallation of ICC bumper under the protection Included

Delivery

DELIVERY STARTING POINT - City, State, Zip: Mount Vernon, OH 43050Price per loaded mile for delivery $2.75Delivery Time Frame in Calendar days ARO 7-210 Calendar Days ARO



*Note: The "Discount to be Applied to Price List" must be a numeric percentage. listing a numeric percentage may result in your bid being rejected. Not listing a numeric percentage may result in your bid being rejected.


SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWED



Page 59 of 62



Hughes Equipment 11' DRW Steel Utility Body (84" CA)95” W x 135” L to clear RAM frame40” H side compartments50” W x 133” L load space between side compartmentsAll steel construction12 Ga treadplate load space floor3” structural channel crossmembers3/8” thick reinforced mounting points14 Ga galvanneal body panel construction14 Ga fender panel w/ 1-1/2” rolled fender flareFull rear tail skirt w/ recessed license plate wellDouble panel doors, double wall tailgate22.5” deep side compartments on both sides sized as follows: Front vertical – 35”L x 40”H Second vertical – 24”L x 40”H Horizontal over wheel-- 44”L x 18”H, fold-down door w/ cable supports Rear vertical-- 32”L x 40”HAdjustable shelves in side compartments as follows: (2) in each front and second vertical compartment (1) in each rear vertical compartment One horizontal compartment shelf, the other side openStainless steel door hinges and rotary latchesGas spring vertical door holders, clip onAutomotive-style bulb rubber door sealSlam-latch pickup-style tailgateLED FMVSS grommet-mounted body lighting installed in body rear panels12 Ga tread plate rear step bumper, split for receiver hitchBody acid washed, white-primed complete and undercoated

Price 11,143.20$

Warranty 5 years




Complete body exterior finish-painted white 1,093.64$



Complete body exterior finish-painted white 1,093.64$

Factory install body on customer chassis 901.43$ includes fuel connection, body light wiring, andrear flaps

2” Class IV Rear receiver hitch w/ safety 656.18$ chain hooks and 7-pole trailer plug, installed

Deluxe tapered cab guard w/ LED STT and 1,053.87$

Page 60 of 62

cargo lights and rear window grille, Installedand painted to match body

73" x 11" High roof w/ (2) full length roof side 5,070.52$ shelves and solid panel double side-hingeddoors w/ locking hardware, Installed and painted

Add to paint High roof Standard Color 798.53$

Add to paint High roof basecoat/clearcoat 996.43$

Transverse compartment, Installed between front 984.28$ side compartments, open to either or both sides

Load space roll cover (in lieu of low sliding roof) 3,161.62$ Weather resistant aluminum shutter roll cover,spring-retract w/ locking latch over tailgate,approx. 8' open load space length (3' remains covered),Installed

Vise-mount reinforcement in bumper 226.68$




Page 61 of 62



Hughes Equipment 11' DRW Aluminum Utility Body (84" CA)95” W x 133” L40” H side compartments50” W load space between side compartmentsAll aluminum construction1” extruded aluminum load space floor3” structural channel crossmembers1/2” thick reinforced mounting points1/8” body panel construction1/8” fender panel w/ 1-1/2” rolled fender flareRear tail skirt w/integral tread brite bumper Split for rear receiver hitch and gusseted to tail skirt1/8” double panel doors, 1/8” double-wall tailgate22.5” deep side compartments on both sides sized as follows: Front vertical – 35”L x 40”H Second vertical – 24”L x 40”H Horizontal over wheel-- 44”L x 18”H, fold-down door w/ cable supports Rear vertical-- 30”L x 40”HAdjustable shelves in side compartments as follows: (2) in each front and second vertical compartment (1) in each rear vertical compartment Open horizontal compartmentStainless steel door hinges and D-handle compression latchesGas spring vertical door holders, clip onAutomotive-style bulb rubber door sealSlam-latch pickup-style tailgateLED FMVSS grommet-mounted body lighting installed in tail skirt

Price 12,951.36$

Warranty 5 years




Complete body exterior primed and finish 1,623.89$ painted white (less floor and bumper steps)



Factory install body on customer chassis 901.43$ includes fuel connection, body light wiring, andrear flaps

2” Class IV Rear receiver hitch w/ safety 656.18$ chain hooks and 7-pole trailer plug, installed

Deluxe tapered cab guard w/ LED STT and 1,053.87$ cargo lights and rear window grille, Installedand painted to match body

Page 62 of 62

73" x 11" Highroof w/ (2) full length roof side 6,263.58$ shelves and solid panel double side-hingeddoors w/ locking hardware, Installed and painted

Transverse compartment, Installed between front 1,163.24$ side compartments, open to either or both sides

Loadspace roll cover (in lieu of low sliding roof) 3,161.62$ Weather resistant aluminum shutter roll cover,spring-retract w/ locking latch over tailgate,approx. 8' open load space length (3' remains covered),Installed

Vise-mount reinforcement in bumper 226.68$





Documents

Service Bodies - MnDOT...56" Single rear wheel application 39.5" high, 48-1/2" wide floor, 14" compartments, OA width 78.5" V- Style Compartments Lock bolt construction of side packs