DIVING DEPARTMENT

• Tubing for Oxygen and breathing system.

• Cleaning and testing of Oxygen and breathing systems.

• Calibration of depth gauges, sensors and safety relief valves.

• Pressuretesting and leaktesting.

• Consultancy and Supervision.

• Yearly inspections of air dive chambers.

• Upgrading and re-certification of diving equipment.

• Imenco (NUT) has over 30 years of

experiance designing and fabrication

of Oxygen and breathing gas

systems.

• Air diving and Saturation systems.

• Milatery and commersial use.

• Imenco has a DNV approved cleaning

procedure for Oxygen and breathing

systems. Both for tubing and valves etc.

• Imenco performs calibration of equipment related to diving

operations.

• Depth gauges, internal and external.

• Safety relief valves

• Pressure indicators

• Sensors

• Imenco has a wide range of tests and verification procedures. We

have a cooperation with Deepx A/S. Together we can perform tests

and verification program for complete or part of saturation system.

• The following tests are within our scope:

• Pressure testing

• Breathing simulator test

• Hot water machine performance

• Gas flow tests

• Thermic test

• Ergonomic

• Etc.

• Based on our experiance and know how, Imenco can support the ship yards or

other parties that have installations of diving systems, or have got a challange due

to new regulations or other modifications. We have been a problem solver for over

30 years.

• New build system (mechanical and electrical), upgrade or modification.

• Tubing for breathing gas: Drawing of P&ID and selection of parts for the system.

• Supervision of tubing installation onboard vessels.

• EPC of diving systems

(SAT and Air Dive).

- Imenco in cooperation with

Deep-X can deliver

complience verification

matrix/report

- NORSOK U-100

- NORSOK U-002

- IMCA

- DNV OSS 305

- DNV E-402

- DNV D-403

• Imenco provides yearly inspection of air dive chambers and related systems.

• Competent person performs inspection following IMCA D 023.

• Advisory to any system upgrade or modification.

• Compressor purity test, messuring CO, CO2, H2O and Oil.

• Gas schematic verifications and update.

• Imenco has redesigned medical lock interlock system for our air dive

chambers. Interpertation of DNV regulations related to the operation

of medical lock, has led to the new design. The new design covers

all requirements coming form regulations: DNV-GL, IMCA and

Norsok. This new design principle can be implemented in any

existing interlock system.

• Imenco has developed a new high Fog FiFi system for air dive

systems. Tests of the system shows how efficient is this system in

comparison to traditional deluge system. The entire chamber is fully

covered in 2-3 seconds. With small amount of water all requirements

related to hyperbaric chamber FiFi system can be fulfilled.

This realy sets a new standard in FiFi systems for diving chambers.

for more information or special requestsContact our Diving Department here:Jan Gunnar Vågen: jgv@imenco.comMichal Holody: mho@imenco.com