Server2012FailoverCluster-LabGuide

7/24/2019 Server2012FailoverCluster-LabGuide

1/22

Lab Setup

LAB Configuration

Domain Controller IP Address-172.20.10.70

Cluster node 01

Host name-CLUSNOD01

PRD(PRODUCTION)-172.20.10.76ISCSI(ISCISI)-192.168.20.2

HB(Heart Beat)-192.168.10.1

Network interfaces-

Cluster node 02

Host name-CLUSNOD02

PRD(PRODUCTION)-172.20.10.75

ISCSI(ISCISI)-192.168.20.3

HB(Heart Beat)-192.168.10.2

Network interfaces-

IP Address-172.20.10.144

Presented lun details-1 Drive(1GB)-QUROUM

ISCSI Server Details

Windows 2012 R2 Failover Cluster-Lab Guide

Server 2012 Page 1


2/22

Login to the cluster node 1/2

Press Windows button on your keyboard

Type ISCSI

Select ISCSI initiator

Connect ISCSI storage to the servers.1.

By default this service not started, therefore click on "yes" button for start the service

2 Drive(10GB)-Cluster disk 2

Server 2012 Page 2


3/22

Open "Server manager"

Click on "Tools"

Select "iSCSI Initiator"

Type the IP Address as a "Target" and click on "Quick Connect"

Now we can see the 1 GB quorum disk on the disk management console

Server 2012 Page 3


4/22

Format and mount quorum disk to the one host as a drive "Q"

Now we can see this disk in a both cluster nodes

Server 2012 Page 4


5/22

Adding failover cluster feature to the both cluster nodes2.

Open "Server Manager"

Click on "Manage"

Click on "Add Roles and Features"

Server 2012 Page 5


6/22

Click on "Next"

Select "Role-based or feature-based installation" and click on "Next"

Select the server name and click on "Next"

Server 2012 Page 6


7/22

Select "Failover Clustering" and Click on "Add Features", Click on "Next"

Click on "Install"

Now both of the servers are ready for creating a cluster

Open "Server Manager"

Click on "Tools"

Select "Failover Cluster Manager"

Server 2012 Page 7


8/22

On the "Failover cluster manager" mmc select "Create Cluster

Click on "Next"

Server 2012 Page 8


9/22

Browse and adding both cluster nodes(servers) to the wizard

Click on "Next"

Now we can validate the cluster, Select "yes" and click on "Next"

Click on "Next"

Server 2012 Page 9


10/22

Select "Run all tests" and click on "Next", This will check our configuration such as

network,storage and system configuration

Click on "Next"

Server 2012 Page 10


11/22

Click on "View" and verify the report.

Click on "Finish"

Assign a cluster name.(testcls01)

Assign a cluster IP Address.(172.20.10.81)

Server 2012 Page 11


12/22

Select "Add all eligible storage to the cluster " and click on "Next"

Cluster has created successfully.

Click on "Finish"

Server 2012 Page 12


13/22

Open "Failover Cluster Manager"

Select "Nodes" and verify that all the nodes are available and status is "UP"

Verify and manage the cluster Configuration3.

Select "Disks" under "Storage" and verify that Quorum disk's availability

Server 2012 Page 13


14/22

Verify the network configuration4.


Select "Networks"

There are three cluster networks will be available, as per the automatic configuration of

this networks cluster and client communication will be disabled on the network which

is using for ISCSI network. Also the network which is configured without gateway will be

assigned to the cluster only(Internal cluster communication and cluster shared

volume's traffic).Finally the network with gateway address will be configured as

"Cluster and Client".

This procedure is same as quorum disk adding process

Add seconds shared drive to the cluster4.

Server 2012 Page 14


15/22

Once the disk is formatted and drive letter assigned we can add this to fail over cluster

Open "Failover Cluster Manager

Go to the "Storage", Select "Disks"

Click on "Add Disk"

Select the disk and click on "OK"

We have completely done our Server 2012 R2 cluster configuration. Now we can start provisioning

services with high availability for our users and network. With server 2012 R2 all the configured

services, applications will be shown under the "Roles" in failover cluster manager console. At the

movement there are no any roles configured.

Configure roles in Windows 2012 R2 Failover Cluster5.


Right click on the "Roles

Select "Configure Roles"

Server 2012 Page 15


16/22

Click on "Next"

Select "File Server" and click on next(We can select multiple server roles for provide the high

availability)

Select "File Server for general use" and click on "Next"

Server 2012 Page 16


17/22

Assign a name and IP address for the file share cluster and click on "Next"

Select the available shared disk for store shared folders on this cluster

Click on "Next"

Server 2012 Page 17


18/22

Click on "Finish"

6. Add file share to the file server cluster


Select "Roles"

Right click on the File server cluster name(fscluster)

Select "Add File Share"

Server 2012 Page 18


19/22

Select "SMB Share-Quick"

Select "F" Drive and click on "Next"

*If we want we can select different path which is in the shard drive also

Server 2012 Page 19


20/22

Assign a share name and description

Click on "Next"

Click on "Next"

Click on "Next"

Server 2012 Page 20


21/22

*We can customize the sharing permission from this page

Click on "Create"

Now we can access the shared folder using cluster name or cluster ip address

7. Change the owner of the file share cluster


Select file share cluster name

Server 2012 Page 21


22/22

Right click on file share cluster name

Select "Move"

Select "Select Node"

Select the second node

Click on "OK"

Documents

Server2012FailoverCluster-LabGuide