Click here to load reader

ser’s Manual digitalYEWFLO Series Vortex Flowmeter ... Series Vortex Flowmeter Installation Manual IM 01F06A01-01EN 2nd Edition IM 01F06A01-01EN Integral Type Vortex Flowmeter Remote

  • View
    220

  • Download
    0

Embed Size (px)

Text of ser’s Manual digitalYEWFLO Series Vortex Flowmeter ... Series Vortex Flowmeter Installation...

  • UsersManual

    1

    2

    5

    8

    11

    9

    12

    13

    7

    10

    6

    3

    4

    digitalYEWFLO Series Vortex Flowmeter Installation Manual

    IM 01F06A01-01EN2nd Edition

    IM 01F06A01-01EN

    Integral Type Vortex Flowmeter

    Remote Type Vortex Flowmeter Detector

    Remote Type Vortex Flow Converter

    This book is a manual that extract the contents related to the installation and wiring from the manuals below.There are some differences, but does not affect the safety of the product performance and use.

    Document No. Title

    IM 01F06A00-01EN digitalYEWFLO Series Vortex Flowmeter

    IM 01F06F00-01ENdigitalYEWFLO Series Vortex FlowmeterFOUNDATION Fieldbus Communication Type

    1. INTRODUCTION

    2. HANDLING PRECAUTIONS

    3. INSTALLATION

    4. WIRING

    5. BASIC OPERATING PROCEDURES (DISPLAY)

    6. PARAMETERS

    7. COMMUNICATION (BRAIN / HART)

    8. OPERATION

    9. ERRORS AND COUNTERMEASURES FOR DISPLAY UNIT AND BRAIN PROTOCOL

    10. EXPLOSION PROTECTED TYPE INSTRUMENT

    11. COMMUNICATION (FIELDBUS)

    12. EXPLOSION PROTECTED TYPE INSTRUMENT FOR FIELDBUS COMMUNICATION TYPE

    13. PED (PRESSURE EQUIPMENT DIRECTIVE)

    INSTALLATION AND OPERATING PRECAUTIONS FOR TIIS FLAMEPROOF EQUIPMENT

  • 1

    IM 01F06A01-01EN

    digitalYEWFLO Series Vortex Flowmeter Installation Manual

    IM 01F06A01-01EN 2nd Edition

    2nd Edition : Nov. 2015 (KP)All Rights Reserved. Copyright 2015, Yokogawa Electric Corporation

    Contents1. INTRODUCTION............................................ 3

    1.1 Using This Instrument Safely .............................. 41.2 Warranty ................................................................ 51.3 ATEX Documentation ........................................... 6

    2. HANDLING PRECAUTIONS ........................ 72.1 CheckingModelandSpecifications .................. 72.2 Transportation and Storage Precautions .......... 7

    3. INSTALLATION ............................................. 83.1 Installation Precautions ....................................... 83.2 Piping Precautions ............................................... 83.3 Maintenance of Piping ....................................... 123.4 Cryogenic and High Process Temperature

    Version Insulation .............................................. 133.5 Mounting Procedures ........................................ 13

    4. WIRING ........................................................ 174.1 Load Resistance of Output Condition ............. 174.2 Selection of Wires .............................................. 184.3 Connection .......................................................... 184.4 Connection of DYC Remote Type Signal

    Cable .................................................................... 214.5 End Processing Method of DYC Remote Type

    Signal Cable ........................................................ 224.5.1 For Remote Type Vortex Flowmeter

    (DY-N) ....................................................... 22

    4.5.2 For DYA Remote Type Converter ............. 23

    4.6 Wiring Procedures and Precautions ................ 244.7 Grounding ........................................................... 25

    5. BASIC OPERATING PROCEDURES (DISPLAY) .................................................... 265.1 DisplayConfiguration ........................................ 26

    6. PARAMETERS ............................................ 276.1 digitalYEWFLO Parameters .............................. 276.2 ParameterConfiguration ................................... 276.3 Self-Diagnostic (Error Code List) ..................... 28

    7. COMMUNICATION (BRAIN / HART) .......... 297.1 Connection Method for the BT200.................... 297.2 Connection Method for the HART

    ConfigurationTool ............................................. 30

    8. OPERATION ................................................ 318.1 Adjustment .......................................................... 31

    8.1.1 Zero Adjustment ....................................... 31

    8.1.2 Span Adjustment ...................................... 31

    8.1.3 Loop Test .................................................. 31

    8.1.4 Totalizer Start and Totalizer Reset ............ 32

    8.1.5 Setting of Pulse Output (Scaling) ............. 32

    8.1.6 Setting of Burnout Switch ......................... 32

    8.1.7 Setting of Write Protect Switch ................. 33

    8.1.8 Power Failure ........................................... 33

    8.2 Adjustment for Manual Mode ............................ 338.2.1 Low Cut Adjustment ................................. 33

    8.2.2 Zero Tuning .............................................. 33

    9. ERRORS AND COUNTERMEASURES FOR DISPLAY UNIT AND BRAIN PROTOCOL ................................................. 359.1 Large Errors or Unstable Output ...................... 359.2 The Indication Goes to Zero at Certain

    Time...................................................................... 359.3 No Output When The Fluid is Flowing ............. 369.4 Output is Indicated at Zero Flow ....................... 379.5 Multi-Variable Type (/MV) ................................... 38

    10. EXPLOSION PROTECTED TYPE INSTRUMENT .............................................. 3910.1 ATEX .................................................................... 3910.2 FM ......................................................................... 4310.3 IECEx ................................................................... 4710.4 CSA ...................................................................... 5010.5 TIIS ....................................................................... 53

    11. COMMUNICATION (FIELDBUS) ................ 5411.1 AmplifierforFieldbusCommunicationType .. 5411.2 Connection of Devices....................................... 5411.3 Host Setting ........................................................ 5511.4 Power-on of digitalYEWFLO and Bus .............. 5611.5 Generation of Alarm ........................................... 56

    11.5.1 Indication of Alarm .................................... 56

    11.5.2 Alarms and Events ................................... 58

    11.6 Simulation Function ........................................... 58

  • 2

    IM 01F06A01-01EN

    12. EXPLOSION PROTECTED TYPE INSTRUMENT FOR FIELDBUS COMMUNICATION TYPE ........................... 5912.1 ATEX .................................................................... 5912.2 FM ......................................................................... 6412.3 IECEx ................................................................... 67

    13. PED (PRESSURE EQUIPMENT DIRECTIVE) ................................................. 69

    INSTALLATION AND OPERATING PRECAUTIONS FOR TIIS FLAMEPROOF EQUIPMENT ................70

    Revision Information

  • 3

    IM 01F06A01-01EN

    INTR

    OD

    UC

    TION

    1

    1. INTRODUCTIONThank you for purchasing the digitalYEWFLO Series Vortex flowmeter.This manual provides the basic guidelines for installation and wiring procedures of integral type vortex flowmeter, remote type vortex flow detector, and remote type vortex flow converter through the communication tool.It does not provide the product specific functional specifications and explanations, maintenance, troubleshooting. For the items which are not covered in this manual, read the applicable users manuals on the front page. These manuals can be downloaded from the website of Yokogawa. To ensure correct use of the instrument, read these manuals thoroughly and fully understand how to operate the instrument before operating it.Website address: http://www.yokogawa.com/fld/doc/

    RegardingThisManual This manual should be provided to the end

    user. The contents of this manual may be changed

    without prior notice. All rights are reserved. No part of this manual

    may be reproduced in any form without Yokogawas written permission.

    Yokogawa makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of merchantability and suitability for a particular purpose.

    All reasonable effort has been made to ensure the accuracy of the contents of this manual. However, if any errors or omissions are found, please inform Yokogawa.

    The specifications covered by this manual are limited to those for the standard type under the specified model number break-down and do not cover custom-made instruments.

    Please note that this manual may not be revised for any specification changes, construction changes or operating part changes that are not considered to affect function or performance.

    Yokogawa assumes no responsibilities for this product except as stated in the warranty.

    If the customer or any third party is harmed by the use of this product, Yokogawa assumes no responsibility for any such harm owing to any defects in the product which were not predictable, or for any indirect damages.

    SafetyandModificationPrecautions The following general safety precautions must

    be observed during all phases of operation, service, and repair of this instrument. Failure to comply with these precautions or with specific WARNINGS given elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Yokogawa assumes no liability for the customers failure to comply with these requirements. If this instrument is used in a manner not specified in this manual, the protection provided by this instrument may be impaired.

    The following safety symbol marks are used in this manual and instrument.

    WARNING

    A WARNING