7500 Series Telescopic Crane

Radio Remote ControlOur pistol grip handle is ergonomic while increasing comfort and decreasing hand fatigue and is available with joystick or toggle switch controls.

Radio Remote Control ReceiverTo simplify troubleshooting and increase productivity, our radio remote control receiver provides an LED readout detailing error codes. It also uses programmable logic for precise control of individual functions.

Flip SheaveOur unique flip sheave allows operators to work in tighter areas by reducing the boom tip profile height by 8" (20.3 cm).

7500 Series Telescopic Crane

Let our telescopic cranes take on the heavy lifting. The IMT 7500 Series telescopic crane has a maximum lifting capacity of 7500 lb (3401.9 kg) and a horizontal boom reach of 30' (9.1 m) — the longest in the industry. Featuring the Penta Boom™ design, this crane is built for strength and control, and when combined with an IMT Dominator® mechanics truck, creates the ultimate service and maintenance truck.

Penta Boom DesignDifferent material thickness to address structural requirements, while controlling the weight of the crane.

Standard Features

• 30' (9.1 m) of boom reach• Fully proportional “pistol grip” radio remote control• Flip sheave boom tip• Boom angle -10° to +80° (-0.2 to 1.4 rad)• Increased capacity• Patented hook stow• Patented anti-two-block device• Radio remote control receiver

Options

• 22' (6.7 m) • Boom tip lights

Body Sizes

• Dominator I• Dominator II

In addition to these specifications, heavy-duty electrical and cooling systems are required. It is recommended that the vehicle be equipped with an engine tachometer, auxiliary brake lock, and power steering.

Minimum Chassis Specifications

Chassis Style Conventional Cab

Front Axle Rating (GAWR) 5000 lb (2268 kg)

Rear Axle Rating (GAWR) 9500 lb (4309.1 kg)

Wheelbase 154" (391 cm)

Cab-to-Axle 84" (213 cm)

Resistance to Bending Moment Minimum 600,000 in-lb (6913 kg-m)

Frame Section Modulus Minimum 14.2 cu in (232.7 cm3)

Gross Vehicle Weight Rating 14,500 lb (6577 kg)

Radio Receiver

Hook Stow Cable Guide

Anti-two-block Device

40.6"(103 cm)

8.7"(22 cm)

8.1"(20.6 cm)

53.9" (137 cm)Center of Gravity

162" (411.5 cm)

17.75"(45 cm)

41.4" (105 cm)

20.2"(51 cm)

35.2"(89.4 cm)

23.4"(59.3 cm)

18.1"(46 cm)14.75"

(37.5 cm)

14.75"(37.5 cm)

20.8" (52.8 cm)

11'-11"(3.6 m)

16'-11"(5.1 m)

21'-8"(6.6 m)

75°

60°

45°

30°

15°

0°

67003040

75003400

75003400

51502335

36501655

27251235

24351105

22601025

2045930

61452785

45402060

36101635

32001450

29001315

26151185

39451790

42651935

46552110

53852445

75003400 6480

2940

80°

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg lb

kglb

kg

lb

kglb

kglb

kg

lb

kg

lb

kg

lb

kg

13'-0"(4.0 m)

21'-6"(6.6 m)

30'-0"(9.1 m)

75°

60°

45°

30°

15°

0°

63002860

73303325

75003400

46402105

23601070

2060935

1760800

1590720

1350615

58802665

39301785

33301510

29401335

27001225

23001045

40001815

44752030

50002270

54402470

75003400 6600

2995

80°

lb

kg

lb

kg

lb

kglb

kg

lb

kg

lb

kg lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kg

lb

kglb

kg

lb

kg

*Crane rating (ft-lb) is the rated load (lb) x the respective distance (ft) from centerline of rotation with all extensions retracted and lower boom in horizontal position.

• Maximum one-part line weight is 4300 lb (1950 kg)• The weight of load-handling devices is part of the load lifted and must

be deducted from the rated capacity

• Maximum one-part line weight is 4300 lb (1950 kg)• The weight of load-handling devices is part of the load lifted and must

be deducted from the rated capacity

*Crane rating (ft-lb) is the rated load (lb) x the respective distance (ft) from centerline of rotation with all extensions retracted and lower boom in horizontal position.

22' Load Chart

30' Load Chart

7500 Series Specifications 22' Boom Crane Rating* 47,000 ft-lb (6.8 tm)

Max. Capacity 7500 lb (3401.9 kg) Max. Horizontal Reach (with flip sheave up) 22' 6" (6.9 m) Max. Horizontal Reach (with flip sheave down) 21' 8" (6.6 m) Max. Capacity @ Max. Reach 2045 lb (930 kg) Fully Retracted 11' 11" (3.6 m)

Hydraulic Extensions 59.7" (151.6 cm)57.2" (145.3 cm)

Lifting Height (with flip sheave down) 21' 5" (6.5 m) Crane Weight 1795 lb (814.1 kg) Crane Storage Height 40.6" (103.1 cm) Center of Gravity Horizontal from CL of rotation Vertical from bottom of crane base

42" (106.7 cm)19.6" (49.8 cm)

Required Mounting Space for Crane Base 20" x 21" (50.8 x 53.3 cm) Optimum Pump Capacity 10 – 12 gpm (37.9 – 45.4 L/min) Tie-Down Bolt Pattern 14.75" x 14.75" (37.5 x 37.5 cm) Rotational Torque 9000 ft-lb (1.3 tm) Main Boom Elevation Speed 12 sec Extension Boom Extend Speed 33 sec

7500 Series Specifications 30' Boom Crane Rating* 52,000 ft-lb (7.3 tm)

Max. Capacity 7500 lb (3401.9 kg) Max. Horizontal Reach (with flip sheave up) 30' 10" (9.3 m) Max. Horizontal Reach (with flip sheave down) 30' (9.1 m) Max. Capacity @ Max. Reach 1350 lb (612.3 kg) Fully Retracted 12' 11" (3.9 m) Hydraulic Extensions 102" x 2 (259 cm x 2) Lifting Height (with flip sheave down) 30' 7" (9.3 m) Crane Weight 2400 lb (1088.6 kg) Crane Storage Height 40.6" (103.1 cm) Center of Gravity Horizontal from CL of rotation Vertical from bottom of crane base

49.9" (126.8 cm)22.2" (56.4 cm)

Required Mounting Space for Crane Base 20" x 21" (50.8 x 53.3 cm) Optimum Pump Capacity 10 – 12 gpm (37.9 – 45.4 L/min) Tie-Down Bolt Pattern 14.75" x 14.75" (37.5 x 37.5 cm) Rotational Torque 9000 ft-lb (1.3 tm) Main Boom Elevation Speed 12 sec Extension Boom Extend Speed 33 sec

40.6"(103 cm)

8.7"(22 cm)

8.1"(20.6 cm)

53.9" (137 cm)Center of Gravity

162" (411.5 cm)

17.75"(45 cm)

41.4" (105 cm)

20.2"(51 cm)

35.2"(89.4 cm)

23.4"(59.3 cm)

18.1"(46 cm)14.75"

(37.5 cm)

14.75"(37.5 cm)

20.8" (52.8 cm)

47.3" (120.1 cm)

6.5"(16.5 cm)

18.1"(46 cm)

23.4"(59.3 cm)

20.8" (52.8 cm)

14.75"(37.5 cm)

14.75"(37.5 cm)

40.6"(103.1 cm)

8.7"(22.1 cm)

17.75"(45 cm)

175" (444.7 cm)50.4" (128 cm)47.8" (121.4 cm)

21.4"(54.4 cm)

Center of Gravity

47.3" (120.1 cm)

6.5"(16.5 cm)

18.1"(46 cm)

23.4"(59.3 cm)

20.8" (52.8 cm)

14.75"(37.5 cm)

14.75"(37.5 cm)

40.6"(103.1 cm)

8.7"(22.1 cm)

17.75"(45 cm)

175" (444.7 cm)50.4" (128 cm)47.8" (121.4 cm)

21.4"(54.4 cm)

Center of Gravity

40.6"(103 cm)

8.7"(22 cm)

8.1"(20.6 cm)

53.9" (137 cm)Center of Gravity

162" (411.5 cm)

17.75"(45 cm)

41.4" (105 cm)

20.2"(51 cm)

35.2"(89.4 cm)

23.4"(59.3 cm)

18.1"(46 cm)14.75"

(37.5 cm)

14.75"(37.5 cm)

20.8" (52.8 cm)

29.6"(75.2 cm)

47.3" (120.1 cm)

6.5"(16.5 cm)

18.1"(46 cm)

23.4"(59.3 cm)

20.8" (52.8 cm)

14.75"(37.5 cm)

14.75"(37.5 cm)

40.6"(103.1 cm)

8.7"(22.1 cm)

17.75"(45 cm)

175" (444.7 cm)50.4" (128 cm)47.8" (121.4 cm)

21.4"(54.4 cm)

Center of Gravity

29.6"(75.2 cm)

Nothing Says Commitment Like The Diamond.™ IMT has been meeting the needs of our customers for over 50 years, and none of it would have been possible without a distributor network that’s second to none. IMT distributors offer fast, knowledgeable service and the ability to help customers find the right product for every application. When you’re looking for reliable equipment and dependable service, remember IMT.

IMT reserves the right to make changes in engineering, design, and specifications; add improvements; or discontinue manufacturing at any time without notice or obligation. IMT, IMT logo, Dominator, Penta Boom and NOTHING SAYS COMMITMENT LIKE THE DIAMOND are registered trademarks or trademarks of Iowa Mold Tooling Co., Inc., Garner, IA, USA.© 2015 Iowa Mold Tooling Co., Inc. All Rights Reserved.

06/15

Iowa Mold Tooling Co., Inc.500 Highway 18 West Garner, Iowa 50438800-247-5958 • www.imt.com

Planetary Winch• Capacity of 4400 lb (1996 kg) powered by

high-torque hydraulic motor• Single line operating speed of 60 fpm (18.2 m/min)

under no-load conditions• Maximum two-part line capacity of 7500 lb (3400 kg)• Equipped with 85' (25.9 m) of 3/8" (9.5 mm) of

6 x 25 FW PRF LRL IWRC XIPS wire rope• Anti-two-block prevents the snatch block assembly

from coming in contact with boom tip• Meets ANSI B30.5 standards

Hydraulic System• Open-centered, full pressure system• System requires 10 gpm (37.9 L/min) optimum oil

flow at 3000 psi (206.8 bar)• Fully proportional control valve with “pistol grip” radio

remote control system• Includes radio elimination cable, hydraulic oil reservoir,

and suction and return line filters

Power Source• Power provided by integral-mounted hydraulic

pump and PTO• Min. requirement is 23.5 hp (17.5 kW) based on

10 gpm at 3000 psi (37.9 L/min at 206.8 bar)• Other standard power sources can be utilized

Cylinder Holding Valves• All cylinders equipped with integral-mounted

counterbalance valves• Prevent sudden cylinder collapse in case of

component failure

Rotation System• Consists of a worm gear and turntable gear bearing• Powered by a high-torque hydraulic motor • Standard rotation is 400° (6.98 rad)• Speed rotation is 30 seconds

Excessive Load Limit System (ELLS)• Pressure transducer used to sense overload• When overloaded, the following functions are

stopped: boom down, extension out, and winch up