Series M - Akron Gearsales.akrongear.com/documents/catalogs/textron/Series M...reducer Two stage base mounted reducer Two stage base mounted motorized Single stage base mounted motorized

Series M

PRODUCTS IN THE RANGE0311

Serving an entire spectrum of mechanical drive applications from food, energy, mining and metal; to automotive,aerospace and marine propulsion, Textron Power Transmission is here to make a positive difference to the supply of drive solutions.

Series AWorm Gear unitsand geared motorsin single & doublereduction types

Series BConex helicoidalgear geometry rightangle gearmotorsand reducers

Series BDScrewjack wormgear unit

Series BSWorm gear unit

Series CRight angle drivehelical worm gearedmotors & reducers

DuoDriveDual gears on parallel output shafts

Series EEconomical planetary servogearboxes

Extruder DriveRugged duty reducer takes highscrew pressure

Series FParallel angle helicalbevel helical gearedmotors & reducers

Series GHelical parallel shaft& bevel helical rightangle drive gearunits

Series HLarge helical parallelshaft & bevel helicalright angle drive units

HighspeedHelical parallel shafthigh speed units

HTPHigh torque planetary gear units

Series JShaft mounted helical speed reducers

Series KRight angle helicalbevel helical gearedmotors & reducers

Series PPrecision planetaryservo gearboxes

Mill DrivesBevel planetary vertical mill drives

Series MIn-line helical gearedmotors & reducers

Series QIn-line planetarygeared motors &reducers

Model RGRight angle gearhead in two precision levels

Series RRight angle spiralbevel gear unit

Series TRight angle straightbevel gear unit

Series WPrecision right angleservo gearboxes

Winches &CapstansCustom engineeredsolutions

Series XCone RingPin and bush elastomer coupling

Series XFlexiwrapDouble flexingelastomer coupling

Series XGearTorsionally rigid,high torque coupling

Series XGridDouble flexing steelgrid coupling

Series XNyliconGear coupling withnylon sleeve

Series XTorque LimiterOverload protectiondevice

Textron Power Transmission can create custom engineered transmission solutions of any size and configuration.

Series M Inch 18/2/04 1:07 pm Page 2

General Description 1

Unit Designations 2

Explanation and use of Ratings and Service Factors 3

Load Classification by Applications 4

Selection Procedure 5 - 6

Unit Versions - Column 9 Entry 7

Output Shaft Options - Column 11 Entry 8

Motor Adaptors - Column 12 Entry 9 - 13

INSTALLATION, MAINTENANCE, LUBRICATION

Installation and Maintenance 15 - 17

Lubrication 18 - 19

Mounting Positions - Column 13 and 14 Entry 20 - 21

Motor Installation 22

Shaft Alignment 23 - 24

MOTORIZED

Motor Performance Data and Standard Motor Variants Available 27 - 28

Brake Motors 29

Motor Details 30 - 31

Additional Motor Features - Column 19 Entry 32

Additional Gearbox Features - Column 20 Entry 33

Selection Tables - Gearmotors 34 - 70

Dimension Sheets - Gearmotors 71 - 90

Motorized Backstop Module 91

REDUCER

Overhung & Axial Loads on Shafts 93 - 94

Ratings - Input Power / Output Torque 95 - 106

Dimension Sheets - Speed Reducers 107 - 116

C-Face (B14) Mounting Dimensions 117

Thermal Power Ratings / Dimensions of Units with Fans 118 - 119

Reducer Backstop Module 120

Shipping Specification 121 - 122

CONTENTS0311

M 0 3 2 2 8 . 0 B M N - 1 A . 7 5 B - -

M 0 5 1 2 5 . 0 B M N - 1 A . 7 5 B - -

M 0 5 1 2 2 . 5 H R N - 1 - - - - - - -

M 0 6 3 2 1 2 5 L M N - 1 A . 7 5 B - -

M 0 7 2 2 7 1 . B R N - 1 - - - - - - -

*

*

*

*

*

*

Four stagebasemountedmotorized

Three stage flangemounted motorized

Single stageflange mountedreducer

Two stage base mountedreducer

Two stage basemounted motorized

Single stage basemounted motorized

M 0 6 4 2 2 5 0 B M N - 1 A . 1 8 B - -

* Typical unit designations

Series M inline gearmotors and reducers provide avery efficient and compact drive solution to meetmost requirements up to 120 HP with maximumoutput torque capacity of 98,200 lb.in.Following in a long line of Textron products, therange takes advantage of many years of accumu-lated design expertise, together with the use ofhigh quality materials and components. The endresult is a series of speed reducing andgearmotors offering high load carrying capacity,high efficiency, quiet running and reliability.

The Range IncludesTwelve sizes of unit with a ratio coverage of 1.2/1to 8/1 in single reduction, 1.4/1 to 70/1 in doublereduction and up to 250/1 in triple reduction and16200/1 in combined units.

Unit Versions Available- Base Mounted- B5 (D) Flange Mounted- Base and B5 (D) Flange Mounted- B14 (C) Flange Mounting- Base Mount and B14 (C) Flange Mounting

Unit type M - Motorized with IEC standard motorUnit type N - Motorized with NEMA standard motorUnit type H - Motorized with IEC high efficiency

motor (EFF1 or EPACT)Unit type E - Motorized with NEMA high efficiency

motor (EPACT)Unit type G - Unit to allow fitting of IEC motor

(non Textron PT motor)Unit type A - Unit to allow fitting of NEMA motor

(non Textron PT motor)Unit type R - Reducer unitUnit type S - Reducer unit with fan kitUnit type W - Reducer unit with backstop CCW

rotationUnit type X - Reducer unit with backstop CW

rotationUnit type Y - Reducer unit with fan and backstop

CW rotationUnit type Z - Reducer unit with fan and backstop

CCW rotation

Design Features IncludePatented standard motor connection (IEC orNEMA).Ability to fit double oil seal input and output asrequired.All units being suitable to fit IEC or NEMA standardmotors.All units are dimensionally interchangeable withother major manufacturers.Brake gearmotors are available as standard.Sizes 01, 02, 03, 04, 05, 06 and 07 are all suppliedwith lubricant.Sizes 08, 09, 10, 13 and 14 are supplied withoutlubricant.Motorized units can be fitted with a backstopmodule and reducer units can be fitted with abackstop and fan.

As improvements in design are being madecontinually this specification is not to be regardedas binding in detail and drawings and capacitiesare subject to alteration without notice. Certifieddrawings will be sent on request.

GENERAL DESCRIPTIONEXAMPLES OF TYPES AND VERSIONS

1

0403

11 -

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

*

2, 3 - Size of Unit

0 1 Through 1 4

5 - Revision Version

2 For Sizes 01 to 08

1 For Sizes 09 to 14

4 - No of Reductions

1 Through 5

Output Shaft

N - Standard Inch

C - Standard Metric

Example M 0 3 2 2 8 . 0 B M N - 1 A . 7 5 B - -

19 -

20 - Additional Gearbox FeaturesDouble Oil Seal, Motorized BackstopEtc

eg - F See Page 33

Additional Motor Features

eg - A See Page 32

For Types Without Motor

Enter -

12 -

13, 14 - Mounting Position

eg 2 B See Page 20

15, 16, 17 - Gearmotor Powers

Motor Adaptor For Unit Types Column10 Entries M, N, H, E, G or ASee Pages 9 to 13For All Other Types Enter -

0403

UNIT DESIGNATIONS

Serie

s

Siz

e of

Uni

t

No

of R

educ

tions

Rev

isio

n Ve

rsio

n

Nom

inal

Ove

rall R

atio

Uni

t Ver

sion

Type

of U

nit

Out

put S

haft

Mot

or A

dapt

or

Mou

ntin

g Po

sitio

n

Gea

rmot

or P

ower

No

of M

otor

Pol

es

Addi

tiona

l Mot

or F

eatu

res

Addi

tiona

l Gea

rbox

Fea

ture

s

Gearbox Codes Motor Codes

M

1 - Series M

Range M

6, 7, 8 - Nominal Overall Ratio

eg 8 . 0 See Pages 85 - 96

See Page8

* This Page May BePhotocopiedAllowing TheCustomer To EnterTheir Order

2

M - Motorized with IEC standard motor

N - Motorized with NEMA standard motor

H - Motorized with IEC high efficiency motor (EFF1 or EPACT)

E - Motorized with NEMA high efficiency motor (EPACT)

G - Unit to allow fitting of IEC motor (non Textron PT motor)

A - Unit to allow fitting of NEMA motor (non Textron PT motor)

R - Reducer unit

S - Reducer unit with fan kit

W - Reducer unit with backstop CCW rotation

X - Reducer unit with backstop CW rotation

Y - Reducer unit with fan and backstop CW rotation

Z - Reducer unit with fan and backstop CCW rotation

18 - No of Motor Poles

- No motor60 Hz 50 Hz

4 Pole (Std) 1800 rpm B 1500 rpm A

4 Pole (High)1800 rpm L 1500 rpm K

6 Pole (Std) 1200 rpm D 1000 rpm C

6 Pole (High)1200 rpm N 1000 rpm M

2 Pole 3600 rpm F 3000 rpm E

8 Pole 900 rpm H 750 rpm G

S Dual speed or special motor

9 - Unit Version

B - Base Mounted

B5 (D) Flange Mounted

Base and B5 (D) Flange Mounted

E - B14 (C) Flange Mounting

V - Base and B14 (C) Flange Mounting

Letter Entry Dependson Flange DiameterSee Page 7

10 - Type of UnitMotor HP Required (For 50 Hz enter kW)

eg . 7 5

For reducer and non standard

motor types enter - - -

See Page34 - 70

Gear unit selection is made by comparing actual loads with catalogue ratings. Catalogue ratings are based on a standardset of loading conditions, whereas actual load conditions vary according to type of application. Service Factors aretherefore used to calculate an equivalent load to compare with catalogue ratings.i.e. Equivalent Load = Actual Load x Service Factor

Mechanical ratings and service factor Fm

Mechanical ratings measure capacity in terms of life and/or strength, assuming 10 hr/day continuous running underuniform load conditions.

Catalogue ratings allow 100% overload at starting, braking or momentarily during operation up to 10 hours per day.

The unit selected must therefore have a catalogue rating at least equal to half maximum overload.

Mechanical Service Factor Fm (Table 1) is used to modify the actual load according to daily operating time, and type ofloading.

Load characteristics for a wide range of applications are detailed in Table 3 opposite, which are used in deciding theappropriate Service Factor Fm from Table 1.

If overloads can be calculated, or accurately assessed, actual loads should be used instead of Fm.

For units subjected to frequent start/stop overloads in excess of 10 times/day multiply factor Fm x Factor Fs (table 2).

For applications where units are to operate in extremely dusty or moist/humid atmospheres unit selection should be referredto Textron Power Transmission application engineers.

Table 1. Mechanical Service Factor (Fm)

Prime moverDuration ofservice-hrs per day

Uniform

Load classification-driven machine

Moderate Heavy

Under 3 0.80 1.00 1.50

3 to 10 1.00 1.25 1.75

Over 10 1.25 1.50 2.00

Under 3 1.00 1.25 1.75

3 to 10 1.25 1.50 2.00

Over 10 1.50 1.75 2.25

Under 3 1.25 1.50 2.00

3 to 10 1.50 1.75 2.25

Over 10 1.75 2.00 2.50

Single cylinder internalcombustion engine

Multi-cylinder internalcombustion engine

Electric motor, steamturbine or hydraulicmotor

mass accelerationfactor < 0.2

mass accelerationfactor < 3

mass accelerationfactor < 10

all external moments of inertia *

moment of inertia of driving motor

* calculated with reference to the motor speed

Start / Stopsper hour (1)

Up to1

Factor Fs 1.00 1.03 1.06 1.10 1.15 1.20

5 10 40 60

Note: (1) Intermediate values are obtained by linear interpolation

Table 2. Number of Starts Factor (Fs)

> 200

3

0403

EXPLANATION & USE OF RATINGS& SERVICE FACTORS

Mass acceleration factor =

log haul Hpresses Mpulp machine reel Mstock chest Msuction roll Mwashers and thickeners Mwinders M

Printing presses

Pullersbarge haul H

Pumpscentrifugal Uproportioning Mreciprocating

single acting; 3 ormore cylinders Mdouble acting; 2 ormore cylinders Msingle acting; 1 or 2cylindersdouble acting; singlecylinder

rotarygear type Ulobe, vane U

Rubber and plasticsindustriescrackers Hlaboratory equipment Mmixed mills Hrefiners Mrubber calenders Mrubber mill-2 on line Mrubber mill-3 on line Msheeter Mtire building machinestire and tube pressopenerstubers and strainers Mwarming mills M

Sand muller M

Sewage disposalequipmentbar screens Uchemical feeders Ucollectors Udewatering screws Mscum breakers Mslow or rapid mixers Mthickeners Mvacuum filters M

Screensair washing U

rotary-stone or gravel Mtravelling water intake U

Slab pushers M

Steering gear

Stokers U

Sugar industrycane knives Mcrushers Mmills M

Textile industrybatchers Mcalenders Mcards Mdry cans Mdryers Mdyeing machinery Mknitting machineslooms Mmangles Mnappers Mpads Mrange drivesslashers Msoapers Mspinners Mtenter frames Mwashers Mwinders M

Windlass

Cranesmain hoists Ubridge traveltrolley travel

Crusherore Hstone Hsugar H

Dredgescable reels Mconveyors Mcutter head drives Hjig drives Hmanoeuvring winches Mpumps Mscreen drive Hstackers Mutility winches M

Dry dock cranesmain hoistauxiliary hoistboom, luffingrotating, swing or slewtracking, drive wheels

Elevatorsbucket-uniform load Ubucket-heavy load Mbucket-continuous Ucentrifugal discharge Uescalators Ufreight Mgravity discharge Uman liftspassenger

Fanscentrifugal Ucooling towers

induced draftforced draft

induced draft Mlarge, mine, etc Mlarge, industrial Mlight, small diameter U

Feedersapron Mbelt Mdisc Ureciprocating Hscrew M

Food industrybeef slicer Mcereal cooker Udough mixer Mmeat grinders M

Generators-notwelding U

Hammer mills H

Hoistsheavy duty Hmedium duty Mskip hoist M

Laundry washersreversing M

Laundry tumblers M

Line shaftsdriving processingequipment Mlight Uother line shafts U

Lumber industrybarkers-hydraulic-mechanical Mburner conveyor Mchain saw and drag saw Hchain transfer Hcraneway transfer Hde-barking drum Hedger feed Mgang feed Mgreen chain Mlive rolls Hlog deck H

Agitatorspure liquids Uliquids and solids Mliquids-variable density M

Blowerscentrifugal Ulobe Mvane U

Brewing and distillingbottling machinery Mbrew kettles-continuousduty Mcookers-continuous duty Mmash tubs-continuousduty Mscale hopper-frequentstarts M

Can filling machines M

Cane knifes M

Car dumpers H

Car pullers M

Clarifiers U

Classifiers M

Clay workingmachinerybrick press Hbriquette machine Hclay working machinery Mpug mill M

Compressorscentrifugal Ulobe Mreciprocating

multi-cylinder Msingle cylinder H

Conveyors-uniformlyloaded or fedapron Uassembly Ubelt Ubucket Uchain Uflight Uoven Uscrew U

Conveyors-heavyduty not uniformlyfedapron Massembly Mbelt Mbucket Mchain Mflight Mlive rolloven Mreciprocating Hscrew Mshaker H

type ofload

Driven Machine

log haul-incline Hlog haul-well type Hlog turning device Hmain log conveyor Hoff bearing rolls Mplaner feed chains Mplaner floor chains Mplaner tilting hoist Mre-saw merry-go-roundconveyor Mroll cases Hslab conveyor Hsmall wasteconveyor-belt Usmall wasteconveyor-chain Msorting table Mtipple hoist conveyor Mtipple hoist drive Mtransfer conveyors Mtransfer rolls Mtray drive Mtrimmer feed Mwaste conveyor M

Machine toolsbending roll Mpunch press-gear driven Hnotching press- beltdrivenplate planers Htapping machine Hother machine tools

main drives Mauxiliary drives U

Metal millsdraw bench carriageand main drive Mpinch, dryer andscrubber rolls-reversingslitters Mtable conveyorsnon-reversing

group drives Mindividual drives H

reversingwire drawing andflattening machine Mwire winding machine M

Mill-rotary typeball Hcement kilns Hdryers and coolers Hkilns, other than cement Hpebble Hrod

plain Hwedge bar H

tumbling barrels H

Mixersconcrete mixers

-continuous Mconcrete mixers

-intermittent Mconstant density Uvariable density M

Oil industrychillers Moil well pumpingparaffin filter press Mrotary kilns M

Paper millsagitators, (mixers) Mbarker-auxiliaries-hydraulic Mbarker-mechanical Hbarking drum Hbeater and pulper Mbleacher Ucalenders Mcalenders-super Hconverting machine,except cutters, platers Mconveyors Ucouch Mcutters-plates Hcylinders Mdryers Mfelt stretcher Mfelt whipper Hjordans M

Driven Machine Driven Machine Driven Machinetype ofload

type ofload

type ofload

Table 3

U = Uniform load

M = Moderate shock load

H = Heavy shock load

= Refer to Textron PowerTransmission

4

0002

LOAD CLASSIFICATION BY APPLICATIONS

EXAMPLE APPLICATION DETAILS

Absorbed power of driven machine = 0.95 HPOutput speed of gearbox or Input speed of machine = 54 rev/minApplication = Uniformly loaded belt conveyorDuration of service (hours per day) = 24hrsMounting position = 1Ambient temperature = 70oF (20oC)Running time (%) = 100%

1 DETERMINE MECHANICAL SERVICE FACTOR (Fm)

Refer to Load Classification by Application, table 3, page 4

Application = Uniformly loaded belt conveyor

Refer to mechanical service factor (Fm), table 1, page 3

Duration of service (hours per day) = 24hrs

Duration ofservice-hrs per day Moderate

Load classification-drive

Electric motor,steam turbineorhydraulic motor

Prime mover

Under 3 0.80 1.00

3 to 10 1.00 1.25

Over 10 1.25 1.50

Therefore mechanical service factor (Fm) = 1.25

If the unit is subject to frequent start/stops Fm must bemultiplied by factor Fs (see table 2 page 3)

Conveyors-uniformlyloaded or fed

apron Uassembly Ubelt Ubucket Uchain U

U = Uniform load

Uniform2 DETERMINE REQUIRED OUTPUT TORQUEAT GEARBOX OUTPUTSHAFT

Absorbed = Absorbed power x 63025output torque Gearbox output speed

0.95 x 63025 = 1109 lb.in54

3 SELECT GEARMOTOR

Refer to selection table one motor size larger than absorbed power.Absorbed power = 0.95 HP, therefore refer to 1.0 HP selection table, page 42

Always select from 4 POLE selection table in the first instance as this offers a more economical solution.

Required output speed of gearbox = 54 rev/min

SELECTION PROCEDUREFOR MOTORIZED UNITS

0403

5

Out

put

Spe

ed

Rat

io

Ser

vice

Fac

tor

Wei

ght o

fB

ase

Mou

nt U

nit

Mot

orF

ram

eS

ize

Out

put

Tor

que Column Entry 1 Through 20

Spaces to be filled when entering order

1.0 HP

4 POLE

Ove

rhun

gLo

ad

N2R/MIN

ilbin

Fm UNIT DESIGNATION lblbf

188 9.09 324 3.71 899 M 0 2 2 2 9 . 0 _ M _ - _ _ 1 . 0 B - - 49.6 80A138 12.37 441 2.89 899 1 2 .122 14.05 500 2.6 899 1 4 .107 15.97 567 2.4 899 1 6 .

97 17.58 626 2.19 899 1 8 .85 20.23 719 1.97 882 2 0 .78 21.99 782 1.81 868 2 2 .65 26.4 938 1.51 899 2 8 .54 31.68 1123 1.26 859 3 2 .48 35.69 1263 1.12 899 3 6 .

Go to point 5

4 CHECK OUTPUT TORQUE

Output torque (M2) of selected unit must be equal or more than required output torque at gearbox outputshaft.

Required output torque at gearbox outputshaft = 1109 lb.in

Selected unit's output torque (M2) = 1123 lb.in, therefore unit is acceptable

Out

put

Spe

ed

Rat

io

Ser

vice

Fac

tor

Wei

ght o

fB

ase

Mou

nt U

nit

Mot

orF

ram

eS

ize

Out

put

Tor



1.0 HP

4 POLE

Ove

rhun

gLo

ad

N2R/MIN i

lbin


188 9.09 324 3.71 899 M 0 2 2 2 9 . 0 _ M _ - _ _ 1 . 0 B - - 49.6 80A138 12.37 441 2.89 899 1 2 .122 14.05 500 2.6 899 1 4 .107 15.97 567 2.4 899 1 6 .

97 17.58 626 2.19 899 1 8 .85 20.23 719 1.97 882 2 0 .78 21.99 782 1.81 868 2 2 .65 26.4 938 1.51 899 2 8 .54 31.68 1123 1.26 859 3 2 .48 35.69 1263 1.12 899 3 6 .

5 CHECK SERVICE FACTOR

Service factor (Fm) of selected unit must be equal or more than required service factor.

Required service factor of gearbox = 1.25

Selected unit's service factor (Fm) = 1.26, therefore unit is acceptable.

Alternatively a M03 unit could be selected which has a greater service factor

6 CHECK OVERHUNG LOADS

If sprocket, gear, etc is mounted on the outputshaft then refer to Overhung Loads Procedure, page 83, and compare withallowable overhung load (lbf) of selected unit

Allowable overhung load (lbf) must be equal or more than calculated overhung load (P)

NOTE: If any of the following conditions occur then consult Textron Power Transmission Application Engineers:-

a) Mass acceleration factor > 10b) Ambient temperature is above 104oF (40oC)

SELECTION PROCEDUREFOR MOTORIZED UNITS

0107

6

Selected unit's service factor (Fm) = 1.65, therefore unit is acceptable.

Out

put

Spe

ed

Rat

io

Ser

vice

Fac

tor

Wei

ght o

fB

ase

Mou

nt U

nit

Mot

orF

ram

eS

ize

Out

put

Tor



1.0 HP

4 POLE

Ove

rhun

gLo

ad

N2R/MIN

ilbin


153 11.15 398 3.78 899 M 0 3 2 2 1 1 . _ M _ - _ _ 1 . 0 B - - 49.6 80A138 12.37 441 3.53 899 1 2 .122 14.05 499 3.24 899 1 4 .107 15.97 569 3.02 799 1 6 .

97 17.58 626 2.78 779 1 8 .85 20.23 720 2.53 745 2 0 .78 21.99 783 2.36 859 2 2 .65 26.4 940 1.97 810 2 8 .54 31.68 1119 1.65 696 3 2 .48 35.69 1258 1.47 766 3 6 .

Out

put

Spe

ed

Rat

io

Ser

vice

Fac

tor

Wei

ght o

fB

ase

Mou

nt U

nit

Mot

orF

ram

eS

ize

Out

put

Tor



1.0 HP

4 POLE

Ove

rhun

gLo

ad

N2R/MIN

ilbin


188 9.09 324 3.71 899 M 0 2 2 2 9 . 0 _ M _ - _ _ 1 . 0 B - - 49.6 80A138 12.37 441 2.89 899 1 2 .122 14.05 500 2.6 899 1 4 .107 15.97 567 2.4 899 1 6 .

97 17.58 626 2.19 899 1 8 .85 20.23 719 1.97 882 2 0 .78 21.99 782 1.81 868 2 2 .65 26.4 938 1.51 899 2 8 .54 31.68 1123 1.26 859 3 2 .48 35.69 1263 1.12 899 3 6 .

Out

put

Spe

ed

Rat

io

Ser

vice

Fac

tor

Wei

ght o

fB

ase

Mou

nt U

nit

Mot

orF

ram

eS

ize

Out

put

Tor



1.0 HP

4 POLE

Ove

rhun

gLo

ad

N2R/MIN

ilbin


188 9.09 324 3.71 899 M 0 2 2 2 9 . 0 _ M _ - _ _ 1 . 0 B - - 49.6 80A138 12.37 441 2.89 899 1 2 .122 14.05 500 2.6 899 1 4 .107 15.97 567 2.4 899 1 6 .

97 17.58 626 2.19 899 1 8 .85 20.23 719 1.97 882 2 0 .78 21.99 782 1.81 868 2 2 .65 26.4 938 1.51 899 2 8 .54 31.68 1123 1.26 859 3 2 .48 35.69 1263 1.12 899 3 6 .

7

0107

UNIT VERSIONS

UNIT VERSIONS,COLUMN 9 ENTRY

B - Base Mounted

E - Flange mount with B14 (C) Flange Mounting (For sizes M01 to M08 only)

V - Base mount with B14 (C) Flange Mounting

Letter Entry Depends on Flange Diameter See tables below

Column9 entry

FlangeDia

UnitSize

Flange Mounted

Single

Double Triple Quadru-ple

Quintu-ple

Column9 entry

FlangeDia

Unit Size

Base and Flange Mounted

Column9 entry

FlangeDia

UnitSize

Single

Column9 entry

FlangeDia

UnitSize

Single

Column9 entry

FlangeDia

UnitSize

Single

FlangeDiameter

4.72 H

5.51 J

6.30 K

7.87 L

9.84 N

Column9 Entry

FlangeDiameter

11.81 P

13.78 R

17.72 F

21.65 G

Column9 Entry

Letter Entry Depends on Flange Diameter See tables below

FlangeDiameter

4.72 S

5.51 T

6.30 U

7.87 W

9.84 X

Column9 Entry

FlangeDiameter

Column9 Entry

11.81 Y

13.78 Z

4.72 H0512 5.51 J

6.30 K7.87 L4.72 H

0612 5.51 J6.30 K7.87 L

5.51 J0712 6.30 K

7.87 L9.84 N7.87 L

0812 9.84 N11.81 P

4.72 S0512 5.51 T

6.30 U7.87 W4.72 S

0612 5.51 T6.30 U7.87 W

5.51 T0712 6.30 U

7.87 W9.84 X7.87 W

0812 9.84 X11.81 Y

(Only available as standard for single reduction units,other units can be supplied as special units)

0122 0132 - -

0222 0232 - -

0322 0332 0342 0352

0422 0432 0442 0452

0522 0532 0542 0552

0822 0832 0842 0852

Double Triple Quadru-ple

Quintu-ple

Column9 entry

FlangeDia

Unit Size

0122 0132 - -

0222 0232 - -

0322 0332 0342 0352

0422 0432 0442 0452

0522 0532 0542 0552

0822 0832 0842 0852

4.72 S5.51 T6.30 U7.87 W4.72 S5.51 T6.30 U7.87 W4.72 S5.51 T6.30 U7.87 W5.51 T6.30 U7.87 W9.84 X5.51 T6.30 U7.87 W9.84 X7.87 W

0622 0632 0642 0652 9.84 X11.81 Y7.87 W

0722 0732 0742 0752 9.84 X11.81 Y11.81 Y13.78 Z

0921 0931 0941 0951 17.72 -1021 1031 1041 1051 17.72 -1321 1331 1341 1351 21.65 -1421 1431 1441 1451 21.65 -

4.72 H5.51 J6.30 K7.87 L4.72 H5.51 J6.30 K7.87 L4.72 H5.51 J6.30 K7.87 L5.51 J6.30 K7.87 L9.84 N5.51 J6.30 K7.87 L9.84 N7.87 L

0622 0632 0642 0652 9.84 N11.81 P7.87 L

0722 0732 0742 0752 9.84 N11.81 P11.81 P13.78 R

0921 0931 0941 0951 17.72 F1021 1031 1041 1051 17.72 F1321 1331 1341 1351 21.65 G1421 1431 1441 1451 21.65 G

L11*

Tapped Holew

L12

L

t

u

ød

OUTPUT SHAFT OPTIONS

OUTPUTSHAFT OPTIONS

TYPE OFOUTPUTSHAFT ød L L11 L12 t u

DIMENSIONS IN INCHES (Metric Shaft in mm)SIZEOF

UNIT

* Inch shaft has anopen ended keyway,therefore no 'L11'dimension is re-quired.

w

Column 11 Entry

N Standard Inch

C Standard Metric

0110

COLUMN11 ENTRY

OUTPUTSHAFT OPTIONS - double, triple, quadruple and quintuple reduction

TYPE OFOUTPUTSHAFT ød L L11 L12 t u

DIMENSIONS IN INCHES (Metric Shaft in mm)SIZEOF

UNIT w

COLUMN11 ENTRY

OUTPUTSHAFT OPTIONS - single reduction

8

01 Inch * N 0.7500”/0.7495” 1.575” - 19/32” 0.829” 3/16” 1/4” UNF x 0.63” deep

Metric C 20.015 / 20.002 40 4 32 22.5 6 M6 x 1, 16 deep

02 Inch * N 1.0000”/0.9995” 1.969” - 19/16” 1.106” 1/4” 1/4” UNF x 0.71” deep

Metric C 25.015 / 25.002 50 4 40 28 8 M10 x 1.5, 22 deep

03 Inch * N 1.0000”/0.9995” 1.969” - 19/16” 1.106” 1/4” 1/4” UNF x 0.71” deep

Metric C 25.015 / 25.002 50 4 40 28 8 M10 x 1.5, 22 deep

04 Inch * N 1.2500”/1.2495” 2.362” - 2” 1.359” 1/4” 3/8” UNF x 0.86” deep

Metric C 30.015 / 30.002 60 4 50 33 8 M10 x 1.5, 22 deep

05 Inch * N 1.3750”/1.3745” 2.756” - 23/8” 1.507” 5/16” 3/8” UNF x 0.75” deep

Metric C 35.018 / 35.002 70 7 60 38 10 M12 x 1.75, 28 deep

06 Inch * N 1.3750”/1.3745” 2.756” - 23/8” 1.507” 5/16” 3/8” UNF x 0.75” deep

Metric C 35.018 / 35.002 70 7 60 38 10 M12 x 1.75, 28 deep

07 Inch * N 1.6250”/1.6240” 3.150” - 23/8” 1.784” 3/8” 5/8” UNF x 1.25” deep

Metric C 40.018 / 40.002 80 5 70 43 12 M16 x 2.0, 36 deep

08 Inch * N 2.1250”/2.1240” 3.937” - 23/4” 2.338” 1/2” 3/4” UNF x 1.50” deep

Metric C 50.018 / 50.002 100 10 80 53.5 14 M16 x 2.0, 36 deep

09 Inch * N 2.3750” / 2.3740” 4.72” - 311/16” 2.65” 0.625” 3/4” UNF 1.65” deep

Metric C 60.030 / 60.011 120 10 100 64 18 M20 x 2.5, 42 deep

10 Inch * N 2.875” / 2.874” 5.51” - 45/8” 3.20” 0.75” 3/4” UNF 1.65” deep

Metric C 70.030 / 70.011 140 15 110 74.5 20 M20 x 2.5, 42 deep

13 Inch * N 3.625” / 3.624” 6.69” - 515/16” 4.01” 0.875” 1” UNF 1.97” deep

Metric C 90.035 / 90.013 170 15 140 95 25 M24 x 3.0, 50 deep

14 Inch * N 4.000” / 3.999” 8.27” - 71/2” 4.44” 1.00” 1” UNF 1.97” deep

Metric C 100.035 / 100.013 210 15 180 106 28 M24 x 3.0, 50 deep

05 Inch * N 0.7500”/0.7495” 1.575” - 19/32” 0.829” 3/16” 1/4” UNF x 0.63” deep

Metric C 20.015 / 20.002 40 4 32 22.5 6 M6 x 1, 16 deep

06 Inch * N 1.0000”/0.9995” 1.969” - 19/16” 1.106” 1/4” 1/4” UNF x 0.71” deep

Metric C 25.015 / 25.002 50 4 40 28 8 M10 x 1.5, 22deep

07 Inch * N 1.2500”/1.2495” 2.362” - 2” 1.359” 1/4” 1/4” UNF x 0.71” deep

Metric C 30.015 / 30.002 60 4 50 33 8 M10 x 1.5, 22 deep

08 Inch * N 1.6250”/1.6240” 3.150” - 23/8” 1.784” 3/8” 5/8” UNF x 1.25” deep

Metric C 40.018 / 40.002 80 5 70 43 12 M16 x 2.0, 36 deep

0311

9

MOTOR ADAPTORS IEC & NEMAC

OLU

MN

12

EN

TR

Y

UNIT SIZE

MO

TO

R F

RA

ME

/ F

LAN

GE

RA

TIO

CO

VE

RA

GE

M0512 M0612 M0712 M0812

IEC Flanges B5 - Column 12 Entry For Unit Types Column 10 Entries G, H and M Only

MO

TO

R F

RA

ME

/ F

LAN

GE

M0512 M0612 M0712 M0812

NEMA Flanges C Face - Column 12 Entry For Unit Types Column 10 Entries A, E and N Only

RA

TIO

UNIT SIZE

MO

TO

R F

RA

ME

/ F

LAN

GE

RA

TIO

CO

VE

RA

GE

M0512 M0612 M0712


CO

LUM

N 1

2

SINGLE REDUCTION UNITS

1.2

- 3.

2

3.6

- 8.

0

1.2

- 2.

5

2.8

- 8.

0

1.2

- 2.

0

2.5

- 8.

0

71 - H - E - -80 B K - G - G90 D R Z J - J100 E S B L B L112 E S B L B L132 - - - - D N

63 - F - V - - - -71 - G - D - - - -80 A J W F - F - D90 C Q Y H - H - E100 - - A K A K A F112 - - A K A K A F132 - - N P C M B G160 - - - - E P C H

56c T U - Q - Q - M143/145TC V W - R - R - N182/184TC X - S T S T J P213/215TC - - U - U V K Q254/256TC - - - - W - L U

UNIT SIZE

CO

LUM

N 1

2

1.2

- 3.

2

3.6

- 8.

0

1.2

- 2.

5

2.8

- 8.

0

1.2

- 2.

0

2.5

- 8.

0

1.2

- 3.

2

3.6

- 8.

0

1.2

- 3.

2

3.6

- 8.

0

1.2

- 2.

5

2.8

- 8.

0

1.2

- 2.

0

2.5

- 8.

0

1.2

- 3.

2

3.6

- 8.

0

0311

10


OLU

MN

12

EN

TR

Y

UNIT SIZE, NUMBER OF REDUCTIONS, REVISION NUMBER

MO

TO

R F

RA

ME

/ F

LAN

GE

RA

TIO

CO

VE

RA

GE

3.6

- 9.

0

11. -

56.

3.6

- 14

.

16. -

56.

3.6

- 14

.

16. -

56.

3.6

- 11

.

12. -

56.

3.6

- 11

.

12. -

56.

5.0

- 14

.

16. -

63.

3.6

- 9.

0

11. -

56.

3.6

- 14

.

16. -

56.

1.4

- 14

.

16. -

71.

1.4

- 14

.

16. -

71.

2.8

- 14

.

16. -

45.

50. -

71.

2.8

- 14

.

16. -

45.

50. -

71.

M0122 M0222 M0322 M0422 M0522 M0622 M0722 M0822 M0921 M1021 M1321 M1421

63 F F - F - F - V - V - V - - - - - - - - - - - - - -71 G G - G - G - D - D - D - - - - - - - - - - - - - -80 A J A J A J W F W F W F - F - D - E - - - - - - - -90 C Q C Q C Q Y H Y H Y H - H - E - F - - - - - - - -100 - - - - - - A K A K A K A K A F - G - E - G N - S W112 - - - - - - A K A K A K A K A F - G - E - G N - S W132 - - - - - - N P N P N P C M B G - H - F - H P - T X160 - - - - - - - - - - - - E P C H A J A G A J Q A G N180 - - - - - - - - - - - - - - - - B K B H B K R B H P200 - - - - - - - - - - - - - - - - C L C J C L S C J Q225 - - - - - - - - - - - - - - - - D M D K D M T D K R250 - - - - - - - - - - - - - - - - - - - - E U - E L -280 - - - - - - - - - - - - - - - - - - - - F W - F M -



MO

TO

R F

RA

ME

/ F

LAN

GE

M0122 M0222 M0322 M0422 M0522 M0622 M0722 M0822 M0921 M1021 M1321 M1421


56c T U T U T U - Q - Q - Q - Q - M - - - - - - - - - -143/145TC V W V W V W - R - R - R - R - N - - - - - - - - - -182/184TC X - X - X - S T S T S T S T J P - S - P - N A - W X213/215TC - - - - - - U - U - U - U V K Q - T - Q - P B - N A254/256TC - - - - - - - - - - - - W - L U P U L R F Q C E P B284/286TC - - - - - - - - - - - - - - - - Q V M S G R D F Q C324/326TC - - - - - - - - - - - - - - - - R W N T H S E G R D364/365TC - - - - - - - - - - - - - - - - - - - - J T - H S -404/405TC - - - - - - - - - - - - - - - - - - - - K U - J T -

RA

TIO

CO

LUM

N 1

2 E

NT

RY


MO

TO

R F

RA

ME

/ F

LAN

GE

RA

TIO

CO

VE

RA

GE

M0122 M0222 M0322 M0422 M0522 M0622 M0722


3.6

- 9.

0

11. -

56.

3.6

- 14

.

16. -

56.

3.6

- 14

.

16. -

56.

3.6

- 11

.

12. -

56.

3.6

- 11

.

12. -

56.

5.0

- 14

.

16. -

63.

3.6

- 9.

0

11. -

56.

CO

LUM

N 1

2

DOUBLE REDUCTION UNITS

71 H H - H - H - E - E - E - -80 B K B K B K - G - G - G - G90 D R D R D R Z J Z J - J - J100 E S E S E S B L B L B L B L112 E S E S E S B L B L B L B L132 - - - - - - - - - - - - D N

3.6

- 9.

0

11. -

56.

3.6

- 14

.

16. -

56.

3.6

- 14

.

16. -

56.

3.6

- 11

.

12. -

56.

3.6

- 11

.

12. -

56.

5.0

- 14

.

16. -

63.

3.6

- 9.

0

11. -

56.

3.6

- 14

.

16. -

56.

1.4

- 14

.

16. -

71.

1.4

- 14

.

16. -

71.

2.8

- 14

.

16. -

45.

50. -

71.

2.8

- 14

.

16. -

45.

50. -

71.

0311

11


OLU

MN

12

EN

TR

Y


MO

TO

R F

RA

ME

/ F

LAN

GE

RA

TIO

CO

VE

RA

GE

M0132 M0232 M0332 M0432 M0532 M0632 M0732 M0832 M0931 M1031 M1331 M1431



MO

TO

R F

RA

ME

/ F

LAN

GE

M0132 M0232 M0332 M0432 M0532 M0632 M0732 M0832 M0931 M1031 M1331 M1431


RA

TIO

CO

LUM

N 1

2 E

NT

RY


MO

TO

R F

RA

ME

/ F

LAN

GE

RA

TIO

CO

VE

RA

GE

M0132 M0232 M0332 M0432 M0532 M0632 M0732


CO

LUM

N 1

2

63 F F F F F F - - - - - - - - - -71 G G G G G G - - - - - - - - - -80 J J J J J J F F L E - - - - - -90 Q Q Q Q Q Q H H M F - - - - - -100 - - - - - - K K N G - G N - G N112 - - - - - - K K N G - G N - G N132 - - - - - - - M - H - H P - H P160 - - - - - - - P - J A J Q A J Q180 - - - - - - - - - K B K R B K R200 - - - - - - - - - L C L S C L S225 - - - - - - - - - M D M T D M T250 - - - - - - - - - - E U - E W -280 - - - - - - - - - - F W - F X -

56. -

200

56. -

200

56. -

200

56. -

200

56. -

200

63. -

225

56. -

200

56. -

200

56. -

250

56. -

250

56c U U U U U U Q Q X - - - - - - -143/145TC W W W W W W R R Y - - - - - - -182/184TC - - - - - - T T Z S - N A - N A213/215TC - - - - - - - V - T - P B - P B254/256TC - - - - - - - - - U F Q C F Q C284/286TC - - - - - - - - - V G R D G R D324/326TC - - - - - - - - - W H S E H S E364/365TC - - - - - - - - - - J T - J T -404/405TC - - - - - - - - - - K U - K U -

56. -

200

56. -

200

56. -

200

56. -

200

56. -

200

63. -

225

56. -

200

56. -

200

56. -

250

56. -

250

40. -

50.

56. -

160

180

- 25

0

40. -

50.

56. -

160

180

- 25

0

M0832

56. -

200

56. -

200

56. -

200

56. -

200

56. -

200

63. -

225

56. -

200

56. -

200

71 H H H H H H - -80 K K K K K K G G90 R R R R R R J J100 - - - - - - - L112 - - - - - - - L132 - - - - - - - N

TRIPLE REDUCTION UNITS

40. -

50.

56. -

160

180

- 25

0

40. -

50.

56. -

160

180

- 25

0

0311

12

MOTOR ADAPTORS IEC & NEMA

CO

LUM

N 1

2 E

NT

RY


MO

TO

R F

RA

ME

/ F

LAN

GE

M0342 M0542 M0642 M0742 M0842 M0941 M1041 M1341 M1441



MO

TO

R F

RA

ME

/ F

LAN

GE

M0342 M0542 M0642 M0742 M0842 M0941 M1041 M1341 M1441

NEMA Flanges C Face - Column 12 Entry For Unit Types Column 10 EntriesA, E and N Only

CO

LUM

N 1

2


MO

TO

R F

RA

ME

/ F

LAN

GE

M0342 M0542 M0642 M0742 M0842 M0941 M1041


CO

LUM

N 1

2

QUADRUPLE REDUCTION UNITS

M1341 M1441

71 H H H H H E E - - -80 K K K K K G G G G G90 R R R R R J J J J J100 S S S S S L L L L L112 S S S S S L L L L L132 - - - - - - - N N N

M0442

63 F F F F F V V - - -71 G G G G G D D - - -80 J J J J J F F F F F90 Q Q Q Q Q H H H H H100 - - - - - K K K K K112 - - - - - K K K K K132 - - - - - P P M M M160 - - - - - - - P P P

M0442

M0442

56c U U U U U Q Q Q Q Q

143/145TC W W W W W R R R R R

182/184TC - - - - - T T T T T

213/215TC - - - - - - - V V V

0311

13

MOTOR ADAPTORS IEC & NEMA


MO

TO

R F

RA

ME

/ F

LAN

GE

M0352 M0552 M0652 M0752 M0852 M0951 M1051 M1351 M1451



MO

TO

R F

RA

ME

/ F

LAN

GE

M0352 M0552 M0652 M0752 M0852 M0951 M1051 M1351 M1451


MO

TO

R F

RA

ME

/ F

LAN

GE

M0352 M0552 M0652 M0752 M0852 M0951 M1051


QUINTUPLE REDUCTION UNITS

M1351 M1451

CO

LUM

N 1

2

NEMA Flanges C Face - Column 12 Entry For Unit Types Column 10 EntriesA, E and N Only

M0452

M0452

M0452

71 H H H H H H H - - -80 K K K K K K K G G G90 R R R R R R R J J J

63 F F F F F F F - - -71 G G G G G G G - - -80 J J J J J J J F F F90 Q Q Q Q Q Q Q H H H100 - - - - - - K K K112 - - - - - - K K K132 - - - - - - - - -

56c U U U U U U U Q Q Q143/145TC W W W W W W W R R R182/184TC - - - - - - - T T T

INSTALLATION,MAINTENANCE,LUBRICATION

2 GENERAL INFORMATION

The following instructions will help you achieve a satisfactory installation of your Series M unit, ensuringthe best possible conditions for a long and trouble free operation.All units are tested and checked prior to despatch, a great deal of care is taken in packing and shippingarrangements to ensure that the unit arrives at the customer in the approved condition.

3 FITTING OF COMPONENTS TO EITHER THE UNIT INPUT OR OUTPUT SHAFT

Shaft diameters below 1.5 inches are held to limits of +0.0000 -0.0005Shaft diameters of 1.5 and above are held to limits of +0.001-0.001- Items (such as gears, sprockets, couplings etc) should not be hammered onto these

shafts since this would damage the shaft support bearings.- The item should be pushed onto the shaft using a screw jack device fitted into the

threaded hole provided in the end of the shaft.- Items being fitted may be heated to 177 / 212oF (80 / 100oC) to aid assembly further.

THREADED HOLE DETAILS

4 WEATHER PROTECTION OF UNIT

All Series M units are provided with protection against normal weather conditions. Where units are tooperate in extreme conditions, or where they are to stand for long periods without running, eg duringplant construction, we should be notified when ordering so that arrangements for adequate protectioncan be made.

15

0107

INSTALLATIONAND MAINTENANCE

SIZE High Speed Shaft Low Speed ShaftNo of

Reductions SIZE High Speed Shaft Low Speed ShaftNo of

Reductions

M01

M02

M03

M04

M05

M06

M07

2, 3 1/4 UNF x .63 deep 1/4 UNF x .63 deep

2, 3 1/4 UNF x .63 deep 1/4 UNF x .71 deep

2, 3, 4, 5 1/4 UNF x .63 deep 1/4 UNF x .71 deep

2 1/4 UNF x .63 deep 3/8 UNF x .86 deep

3, 4, 5 1/4 UNF x .63 deep 3/8 UNF x .86 deep








2 5/13 UNF x .63 deep 5/8 UNF x 1.25 deep


4, 5 1/4 UNF x .63 deep 5/8 UNF x 1.25 deep

M08

M09

M10

M13

M14






2 1/2 UNF x 1.10 deep 3/4 UNF x 1.65 deep








2, 3 3/4 UNF x 1.65 deep 1 UNF x 1.97 deep

4 5/13 UNF x .63 deep 1 UNF x 1.97 deep


2, 3 3/4 UNF x 1.65 deep 1 UNF x 1.97 deep



5 INSTALLATION

5.1 MOTORIZED AND REDUCERS (SIZES 01, 02, 03, 04, 05, 06 & 07)Motorized and Reducer types of sizes 01, 02, 03, 04, 05, 06 & 07 are supplied ready filled with theappropriate amount of lubricant for the mounting position identified in the original order. (If the unitis to be mounted in a different position to that originally intended then the amount of lubricant in theunit will require amending

- See Lubrication Section 6 for the revised quantities- Sizes M04 to M07 have several oil fill and drain plugs to cater for all mounting

positions. See page 21 for plug positions.

MOTORIZED AND REDUCERS (SIZES 08, 09, 10, 13 & 14)Motorized and Reducer types of sizes 08, 09, 10, 13 & 14 are shipped less oil, for the customerto fill on site once installed. The different mounting positions are indicated on page 20 with theappropriate oil fill quantities in Lubrication Section 6. The units have several oil fill and drain plugsto cater for all mounting positions. See page 21 for plug positions.

5.2 FIXING TO CUSTOMER EQUIPMENTFixing gear unit flange facings or feet to the customer's equipment use screws to ISO grade 8.8minimum.

Torque tighten to:-

5.3 MOTOR CONNECTIONS

TO MAINSConnection of the electric motor to the mains supply should be made by a qualified person.The current rating of the motor will be identified on the motor plate, and correct sizing of thecables to electrical regulations is essential.

MOTOR TERMINAL CONNECTIONCircuit diagrams for the correct wiring of the motor terminal box are included on page 22 ofthis document if the motor is of Textron Power Transmission plating.Alternatively if the motor is supplied separately or if fitted with a motor from a differentmanufacturer, then this should have appropriate documentation provided with it.

16

ScrewSize

Tightening Torque

0107


Holding Down Bolts /Output Flange Bolts

Motors to Gearhead

M6 88 lbf.in 7.3 lbf.ft 88 lbf.in 7.3 lbf.ftM8 220 lbf.in 18.3 lbf.ft 160 lbf.in 13.0 lbf.ftM10 450 lbf.in 37.5 lbf.ft 325 lbf.in 27.0 lbf.ftM12 750 lbf.in 62.5 lbf.ft 570 lbf.in 47.0 lbf.ftM16 1770 lbf.in 147.5 lbf.ft 1330 lbf.in 110.0 lbf.ftM20 3100 lbf.in 258.3 lbf.ft 2300 lbf.in 190.0 lbf.ftM24 5400 lbf.in 450 lbf.ft -M30 10800 lbf.in 900 lbf.ft -M36 19000 lbf.in 1585 lbf.ft -

17

5.4 FOOT-MOUNTED UNITS

The following procedure is recommended for all foot mounted units.Foot mounted units are supplied either as free standing units, or if required, mounted on a standardbaseplate with a foot mounted motor correctly aligned and connected by a Textron Power Transmissionflexible coupling.

a) Clean shaft extensions and ventilator when fitted.

b) Secure unit, or baseplate if fitted to a rigid foundation using heavy duty bolts to ISO grade 8.8minimum.

c) Ensure baseplate is not distortedNote: Units not supplied on baseplates should if possible be mounted on the same bedplate asthe prime mover.

d) Align unit (see pages 23 and 24)Note: It is important to ensure when aligning unit on baseplate that all machined mountingpoints are supported over their full area.If steel packings are used these should be placed either side of the foundation bolt as closeas possible. During the finale bolting ensure the unit or baseplate is not distorted this willcause strains in the gear case resulting in errors of alignment of shafts and gearing.

e) For units mounted on bedplates after alignment select any two diagonally opposite feet, drill reamand dowel in position.

f) Fit guards in accordance with the factory acts.

g) Check motor wiring for correct direction of rotation this is important when a backstop device is fitted.

h) Fill gear unit with oil (if not factory filled) as detailed in Section 6.

5.5 REPLACEMENT OF OIL SEALS

a) Clean and drain the unit.

b) Remove any equipment from the outputshaft such as couplings and remove the output key.

c) Remove the old seal

d) Smear oil seals with grease (NLGI Grade 2 grease).

e) Fit replacement seal on a seal guide, slide it along the shaft and press the seal into the housings.

f) Fill with the correct amount of an approved lubricant, see Lubrication Section 6.

0107


6 LUBRICATION AND MAINTENANCE6.1 LUBRICATION

Gear units 01, 02, 03, 04, 05, 06 & 07 will be supplied filled with a quantity of EP mineral oil (TPTGrade 6E) appropriate to the intended mounting position (see page 20). However if, as requested, theunit is supplied without lubricant then the oil quantity required is obtained from Table 2. Gear units 08,09, 10, 13 & 14 are supplied without lubricant. Recommended lubricants are listed in the ApprovedLubricant scheme booklet.

6.2 PERIODIC INSPECTION

Check oil level every 3000 hours or 6 months whichever is sooner on sizes M04, 05, 06, 07, 08, 09,10,13 and 14 and if necessary top up with the recommended grade of lubricant.

6.3 OIL CHANGES

• Sizes 01, 02 and 03 units are lubricated for life.• All other sizes of Series M will require an oil change:

- 10,000 hours for mineral oil- 20,000 hours for synthetic oil

6.4 TEMPERATURE LIMITATIONS

The standard lubricant is suitable for operation in ambient temperatures of 32° to 95°F (0° to 35°C),outside of this consult Table 1 or Textron Power Transmission Application Engineers.

18

0107

LUBRICATION

TABLE 1 OIL GRADES

6.5 GREASE LUBRICATION

Where re-greasing points are provided add 2 shots monthly of NLGI 2 grade grease.

6.6 VENTILATOR

For units sizes M04 and larger a ventilator plug is supplied loose with each unit. Remove the fillerplug as indicated on page 21 and fit the ventilator plug.

6.7 LUBRICATION QUANTITIES

M0512 M0812Unit Size

MO

UN

TIN

GP

OS

ITIO

N

SINGLE REDUCTION

M0612 M0712

1 0.3 0.6 1.2 2.5

2 0.3 0.6 1.2 2.5

3 0.3 0.6 1.2 2.5

4 0.4 0.7 1.5 3.5

5 0.4 0.6 1.2 2.5

6 0.5 1.0 2.0 4.1

TABLE 2 LUBRICANT QUANTITY (Liters)Oil quantities are approximate, fill gearbox until oil escapes from level plug holeDo not overfill as excess lubricant may cause overheating and leakage

LUBRICANTtype E 23oF to 68oF

(-5oC to 20oC)type H -22oF to 20oF

(-30oC to 20oC)

32oF to 95oF(0oC to 35oC)

68oF to 122oF(20oC to 50oC)

AMBIENT TEMPERATURE RANGE

EP Mineral Oil(type E)

Polyalphaolefinbased Syntheticwith EP additive(type H)

CONVERSION TABLE

Liters to US gallons = liters x 0.26

5E (VG 220) 6E (VG 320) 7E (VG 460)

5H (VG 220) 5H (VG 220) 6H (VG 320)

7 STARTING UP

7.1 PRIOR TO STARTING UPa) ensure ventilator is fitted (M04 & above)b) check oil level (M04 & above) top up if necessaryc) ensure all safety devices are in place (ie guards fitted)d) remove any safety devices fitted to prevent machine rotation

7.2 Starting up should be performed or supervised by suitably qualified personnel

Caution: any deviation from normal operating conditions, (increased temperature, noise, vibrations,power consumption etc) suggest a malfunction, inform maintenance personnelimmediately.

8 NOISEThe range of Series M product satisfies a noise (sound pressure level) of 85 dB(A) or less whenmeasured at 1 meter from the unit surface.Measurements taken in accordance with AGMA 299.01 (B.S.7676 Pt1 : 1993) (ISO 8579-1 : 1993).

9 CLEANINGWith the drive stationary periodically clean any dirt or dust from the gear unit and the electric motor coolingfins and fan guard to aid cooling.

Any further information or clarification required may be obtained by contacting Textron Power Transmission,Please see contact details at the back of this booklet.

19

0107

LUBRICATION

M0132 M0432 M0632 M0732 M0832 M0931 M1031 M1331 M1431Unit Size

MO

UN

TIN

GP

OS

ITIO

N

TRIPLE REDUCTION AND FINAL STAGE QUADRUPLE AND QUINTUPLE REDUCTION

M0532M0232 M0332

1 0.7 0.7 0.7 1.3 1.3 1.9 2.3 3.4 11.5 11.0 17.0 24.0

2 0.7 0.7 0.7 1.6 1.6 1.8 2.9 6.0 11.5 23.0 33.0 50.0

3 0.7 0.8 0.8 1.5 1.5 1.7 2.6 5.8 11.5 23.0 33.0 50.0

4 0.7 0.8 0.8 1.9 1.9 2.1 3.3 7.9 11.5 20.0 30.0 43.0

5 1.0 1.4 1.4 1.9 1.9 1.9 2.9 6.4 16.8 32.0 47.0 72.0

6 1.1 1.5 1.5 2.5 2.5 2.7 4.7 9.3 16.5 27.0 40.0 67.0

PRIMARY STAGE QUADRUPLE REDUCTION (Quantities obtained from above double and triple for sizes indicated)M0342 M0542 M0642 M0742 M0842 M0941 M1441Unit Size M1341M1041

PRIMARY STAGE QUINTUPLE REDUCTION (Quantities obtained from above double and triple for sizes indicated)M0352 M0552 M0652 M0752 M0852 M0951 M1451Unit Size M1351M1051

M0442

PRIMARY UNIT M0122 M0322 M0322 M0322 M0322 M0522 M0522 M0722 M0722 M0722SECONDARY UNIT M0322 M0422 M0522 M0622 M0722 M0822 M0921 M1021 M1321 M1421

M0452

PRIMARY UNIT M0132 M0332 M0332 M0332 M0332 M0532 M0532 M0732 M0732 M0732SECONDARY UNIT M0322 M0422 M0522 M0622 M0722 M0822 M0921 M1021 M1321 M1421

M0122 M0422 M0622 M0722 M0822 M0921 M1021 M1321 M1421Unit Size

MO

UN

TIN

GP

OS

ITIO

N

DOUBLE REDUCTION AND FINAL STAGE QUADRUPLE AND QUINTUPLE REDUCTION

M0522M0222 M0322

1 0.7 0.75 0.75 1.5 1.5 2.0 2.6 3.7 10.5 11.0 17.0 24.0

2 0.7 0.75 0.75 1.8 1.8 2.0 3.1 6.2 12.0 22.0 31.0 49.0

3 0.7 0.75 0.75 1.6 1.6 1.8 2.8 5.4 12.0 22.0 31.0 49.0

4 0.7 0.75 0.75 1.9 1.9 2.1 3.3 7.3 12.0 19.0 28.0 41.0

5 1.0 1.45 1.45 1.9 1.9 2.1 3.2 6.4 16.8 32.0 47.0 72.0

6 1.0 1.45 1.45 2.7 2.7 2.9 4.9 9.1 16.4 26.0 38.0 65.0

20

MOUNTING POSITION0107

2 61 B3

B7 V5

B8

B5

V1

B6V65

3

4

1

6V3

5

270o

0o

90o

180o

Base Mounted Units

COLUMN 13 ENTRY

COLUMN 14 ENTRY

MOUNTING POSITIONS - SHOWN AS MOTORIZED - APPLIES ALSO FOR REDUCERS

Column 14

EntryTerminal Box Position

A 0o

B 90o

C 180o

D 270o

- Reducer or no motor fitted

ALL MOTORS

Flange Mounted Units

1

Double, Triple, Quadruple and Quintuple Reduction Units

Single Reduction Units

(Plug positions apply for sizes M04 and larger)

1

B3

B3

B5

B5

B7

B7

B6

B6

B8

B8

V5

V5

V6

V6

V1

V1

V3

V3

4

4

2

2

5

Ventilator / Filling Position

Ventilator M09 - 14

Ventilator M09 - 14

Ventilator M01 - 08

Ventilator M01 - 08

5

3

3

6

6

Level Position

Drain Position

21

PLUG POSITIONS0311

Ventilator M04-14

Ventilator M04-14

NOTE: This instruction only applies to Textron Power Transmission plated motors.Motors fitted by the customer or requested by the customer of Textron Power Transmission from adifferent manufacturer will have separate documentation provided with it.

Textron Power Transmission brake motors are only suitable to run with a maximum of 230V.

22

SUPPLYLINES

FIGURE 1

SUPPLYLINES

MOTOR SIZE SUPPLY VOLTAGE MOTOR SIZE SUPPLY VOLTAGE

0.16HP to 3HP 380 / 420 V, 50 Hz

440 / 480 V, 60 Hz

4HP and Above 660 / 690 V, 50 Hz

CIRCUIT DIAGRAM - MOTOR TERMINAL BLOCK

DELTA CIRCUIT (LOW VOLTAGE) STAR CIRCUIT (HIGH VOLTAGE)

THREE PHASE INDUCTION MOTOR INSTALLATION

CONNECTION TO MAIN POWER SUPPLY

- Connection of the electric motor to the mains supply should be done by aqualified person.

- Connect motor terminals in accordance with the diagram inside theterminal box cover. (Also identified in Fig. 1 on this sheet).

Note: It is important that the main supply details are checked against thenameplate data and that they are connected as indicated on thenameplate. The correct sizing of the cables to electrical regulations isessential.

- To change the direction of rotation of the electric motor, one of thethree main line terminals should be changed with the other.

- Connect the earth conductors to the marked earth terminals.

THREE PHASE INDUCTION MOTOR0311

0.16HP to 3HP 220 / 240 V, 50 Hz

230 / 280 V, 60 Hz

4HP and Above 380 / 420 V, 50 Hz

440 / 480 V, 60 Hz

W2

W2

U1U1

U2

U2

V1V1

V2

V2

W1W1

Z Z

UU

X X

VV

Y Y

WW

suitable for Star / Delta starting

AFigure 1Figure 1

Figure 2Figure 2

Figure 3Figure 3

Figure 4Figure 4

AA

AA11

11

33

4 22

22

33

4

B

B

B

Figure 5Figure 51

2

3

4

NOTE: Check the alignment after running the unit untilit has attained its normal working temperature.Any discrepancies can then be rectified.

SHAFT ALIGNMENT

Errors of alignment fall into categories of angularity (seefigure 1) and eccentricity (see figure 2), or a combinationof both.

Errors of angularity should be checked for and correctedbefore errors of eccentricity

Alignment in accordance with the following procedurewill ensure vibration levels meeting those set out in ISO10816 Part 1.

Errors of Angularity

If the faces are perfectly true, the angularity can bechecked by keeping both shafts stationary and takingmeasurements with a block gauge and feelers at thefour points 1, 2, 3 and 4 as shown in figure 3. Thedifference between the readings 1 and 3 will give theerror of alignment in the vertical plane, over the length ofthe shaft equal to the diameter of the coupling flanges,and from this the difference in the relative heights of thefeet of the motor or other connected machine can befound by proportion. Similarly the difference betweenthe readings 2 and 4 gives the amount of sidewaysadjustment necessary to correct any errors of alignmentin the horizontal plane.

Generally, however, the coupling faces will not beabsolutely true and whilst any errors so found could beallowed for in checking angularity by the stationarymethod an easier method presents itself. This consistsin marking the points 1 on both "A" and "B" and rotatingboth half couplings, keeping the marked points together.By taking measurements each quarter-revolution theerrors in the vertical and horizontal planes are againfound.

TYPE OFCOUPLING

ALLOWABLE GAP (G) (Inches or mm)

Rigid coupling G = 0.0005 D

The permitted angularity error is as follows

NOTE: D is the diameter (Inches or mm) at which the gap is measured.

SHAFT ALIGNMENT

23

0108

All other types Please see appropriate installation andmaintenance manual for coupling typefitted

SHAFT ALIGNMENT

24

Errors of Eccentricity

The procedure for measuring eccentricity is precisely analogous to that used for angularity. In this case,however, the measurements are taken in a radial direction and the most convenient and accurate meansof doing this utilises a dial indicator suitably clamped to one half coupling, and bearing on the hub or flangeof the other, as shown in figures 4 and 5 on page 23.

Care must, however, be taken to ensure the support for the dial indicator is sufficiently rigid to prevent theweight of the indicator from causing deflection and, in consequence, inaccurate readings. Extra care shouldbe taken where taper roller bearings are fitted to ensure that alignment is checked with shafts in mid-pointposition and a final check made with the unit at operating temperature.

The permitted eccentricity error which can be accommodated in addition to that of the angularity error isas follows :-

SERIES X COUPLINGS

Textron Power Transmission produces standard flexible couplings to cover the complete range of Textronunits, please contact Textron Power Transmission for details.

TYPE OFCOUPLING

UNITSIZE

ALLOWABLE ECCENTRICITY(inches)

Rigid

SPECIAL NOTE CONCERNING RIGID COUPLINGS

In lining up elements involving rigid couplings it is important that no attempt is made to correct errors ofalignment or eccentricity greater than those above by tightening of the coupling bolts (This applies when thesystem is cold or at operating temperature). The result is mis-alignment and the setting up of undue stressesin the shaft, coupling and bearings. This will be revealed by the springing apart of the coupling faces if thebolts are slackened off. A check on the angularity of a pre-assembled job, after bolting down, can be obtainedin the case of rigid couplings by slackening off the coupling bolts, when any mis-alignment will cause thecoupling faces to spring apart. This check may not, however, reveal any strains due to eccentricity owingto the constant restraint imposed by the spigot.

0311

All other types Please see appropriate installation andmaintenance manual for coupling typefitted

M01, M02, M03, M04,

M05, M06, M07 & M08

M09, M10,

M13 & M14

0.001

0.0014

NOTES

0311

MOTOR PERFORMANCE DATA

FullLoad

(RPM)kW

FrameNo.

Efficiency Power FactorCurrentat

460V60Hz

(Amps)

RotorInertiaGD2

(lb,in2)

100%Load(%)

75%Load(%)

75%Load

(Cos ø)

D.O.L.Start

Current(% FLT)

Pull UpTorque(% FLT)

TEFC, CLASS F, 104oF (40oC) AMBIENT TEMP. DESIGN B CONTINUOUS DUTY S.F. 1.0, 220 V, 380 V, 460 V, 575 V, 60HZ

ALUMINUM MOTORS TYPICAL PERFORMANCE

27

100%Load

(Cos ø)

D.O.L.Start

Torque(% FLT)

Pull OutTorque(% FLT)

ApproxWeight

(lbs)

Currentat

380V60Hz

(Amps)

HP

Currentat

220V60Hz

(Amps)

Currentat

575V60Hz

(Amps)

0.16 0.12 3405 63 0.86 0.50 0.41 0.33 61.2 57.0 0.60 0.58 560 230 200 250 7 101660 63 0.90 0.52 0.43 0.34 60.5 60.0 0.58 0.49 500 220 200 280 8 10

0.25 0.18 3416 63 1.23 0.71 0.59 0.47 64.0 60.0 0.60 0.52 590 220 190 300 7 101672 63 1.27 0.74 0.61 0.49 62.0 62.4 0.60 0.55 500 220 200 300 10 101062 71 1.43 0.83 0.68 0.55 60.0 61.9 0.55 0.47 380 175 158 200 18 14

0.33 0.25 3416 63 1.58 0.91 0.75 0.60 64.0 60.0 0.65 0.57 600 240 200 300 8 101708 71 1.54 0.89 0.74 0.59 65.5 64.0 0.65 0.57 550 220 200 300 12 141062 71 1.80 1.04 0.86 0.69 63.0 63.3 0.58 0.50 400 175 158 210 22 14

0.5 0.37 3416 71 1.87 1.08 0.90 0.72 71.0 67.0 0.73 0.66 770 240 210 320 8 141672 71 2.08 1.21 1.00 0.80 68.5 66.2 0.68 0.59 640 210 190 250 15 141085 80A 2.59 1.50 1.24 0.99 65.7 64.0 0.57 0.52 520 200 180 220 28 21

0.75 0.55 3392 71 2.78 1.61 1.33 1.06 74.3 70.5 0.70 0.64 770 240 200 290 8 141732 80A 2.81 1.62 1.34 1.07 73.5 72.0 0.70 0.60 670 220 200 270 23 211085 80B 3.51 2.03 1.68 1.34 68.5 66.5 0.60 0.48 490 175 158 220 38 24

1 0.75 3424 80A 3.34 1.93 1.60 1.28 76.5 75.0 0.77 0.72 770 22 170 250 15 211712 80A 3.58 2.07 1.71 1.37 75.3 74.3 0.73 0.67 580 200 200 260 28 211085 90S 4.41 2.55 2.11 1.69 72.0 71.0 0.62 0.55 510 175 158 210 55 30

1.5 1.1 3424 80B 4.69 2.71 2.24 1.79 77.0 75.5 0.80 0.76 795 220 200 270 18 241712 90S 5.15 2.98 2.46 1.97 77.8 76.8 0.72 0.66 720 220 200 240 44 301092 90L 5.95 3.45 2.85 2.28 73.5 76.0 0.66 0.59 520 175 158 220 75 32

2 1.5 3424 90S 6.08 3.52 2.91 2.33 78.0 77.0 0.83 0.81 800 230 210 270 34 301712 90L 6.39 3.70 3.1 2.45 80.0 78.2 0.77 0.69 700 210 185 250 55 321092 100L 7.48 4.33 3.6 2.86 78.5 77.2 0.67 0.66 530 180 160 220 103 53

3 2.2 3460 90L 8.48 4.91 4.1 3.25 82.0 82.0 0.83 0.82 795 200 170 270 48 321718 90LA 9.32 5.40 4.5 3.57 81.5 81.2 0.76 0.70 760 200 180 240 75 441725 100L 9.14 5.29 4.4 3.50 82.0 81.0 0.77 0.67 770 205 180 250 103 531122 112M 10.18 5.90 4.9 0.00 81.0 79.8 0.70 0.62 650 175 158 220 185 68

4 3 3473 100L N/A 6.58 5.4 4.35 81.5 82.0 0.85 0.83 770 200 170 270 72 531724 100L N/A 6.78 5.6 4.48 84.0 83.0 0.80 0.74 700 200 180 240 144 531127 132SA N/A 7.16 5.9 4.73 82.7 82.0 0.77 0.70 720 175 158 230 479 106

5.5 4 3485 112M N/A 8.27 6.8 5.47 83.5 83.2 0.88 0.86 870 200 160 260 144 681736 112M N/A 8.64 7.1 5.71 85.8 84.2 0.82 0.77 830 220 190 240 202 681133 132M N/A 9.78 8.1 6.46 84.0 82.2 0.74 0.66 750 200 180 240 547 115

7.5 5.5 3512 132SA N/A 11.3 9.3 7.45 85.2 84.0 0.87 0.82 860 220 200 250 202 1061732 112MA N/A 12.0 9.9 7.96 85.7 85.5 0.81 0.77 900 200 180 230 291 991745 132SA N/A 11.6 9.6 7.67 86.7 85.5 0.83 0.77 830 200 180 230 325 1061133 132M N/A 12.5 10.3 8.23 86.0 84.8 0.78 0.73 850 185 170 230 718 115

10 7.5 3512 132SB N/A 14.9 12.3 9.85 87.9 87.5 0.87 0.85 765 200 170 240 239 1171732 132M N/A 15.2 12.5 10.0 88.3 87.9 0.85 0.80 840 215 200 230 444 1151133 160MA N/A 16.9 14.0 11.2 86.2 84.0 0.78 0.71 850 190 170 240 1265 179

12.5 9.3 1742 132MA N/A 19.0 15.6 12.5 87.7 87.2 0.85 0.81 900 200 180 230 752 19415 11 3512 160MA N/A 21.8 18.0 14.4 87.0 85.8 0.88 0.86 850 220 200 230 513 179

1742 132MB N/A 21.7 18.0 14.4 88.4 88.1 0.87 0.84 900 200 180 230 752 1941754 160MA N/A 21.1 17.4 13.9 89.0 88.5 0.89 0.85 890 200 180 230 992 1791138 160L N/A 23.8 19.7 15.7 87.7 87.2 0.80 0.75 830 200 180 230 1846 209

20 15 3521 160MB N/A 28.5 23.5 18.8 89.0 88.3 0.90 0.89 900 220 200 230 684 1721760 160L N/A 29.1 24.1 19.2 91.0 90.5 0.86 0.81 900 210 190 220 1162 209

25 18.5 3527 160L N/A 34.9 28.8 18.7 89.5 88.8 0.90 0.89 875 220 200 230 821 209

0311

MOTOR PERFORMANCE DATA

28

NOTE. 1. The above are typical values based on test.

2. Actual load & full voltage starting, According to BS 4999, AS 1359.

3. Tolerance according to BS4999, AS1359.

4. Efficiency, power factor, speed and torque are the same for other voltages. Current values vary inversely with voltage.

5. Data subject to change without notice.

FullLoad

(RPM)kW

FrameNo.

Efficiency Power FactorCurrentat

460V60Hz

(Amps)

RotorInertiaGD2

(lb,in2)

100%Load(%)

75%Load(%)

75%Load

(Cos ø)

D.O.L.Start

Current(% FLT)

Pull UpTorque(% FLT)

TEFC, CLASS F, 104oF (40oC) AMBIENT TEMP. DESIGN B CONTINUOUS DUTY S.F. 1.0, 220 V, 380 V, 460 V, 575 V,60HZ

CAST IRON MOTORS TYPICAL PERFORMANCE

100%Load

(Cos ø)

D.O.L.Start

Torque(% FLT)

Pull OutTorque(% FLT)

ApproxWeight

(lbs)

Currentat

380V60Hz

(Amps)

HP

Currentat

575V60Hz

(Amps)

Currentat

220V60Hz

(Amps)

5.5 4 868 D160M N/A 9.43 7.79 6.2 85.4 85 0.755 0.679 532 198 188 283 1200 2497.5 5.5 864 D160M N/A 13.2 10.9 8.7 84 84.3 0.755 0.682 575 217 195 331 281 24910 7.5 1164 D160M N/A 16.8 13.9 11.1 85 84.6 0.797 0.74 646 187 168 349 274 249

864 D160L N/A 17.2 14.2 11.4 85.6 86.2 0.773 0.703 576 216 194 340 390 29315 11 3522 D160M N/A 21.2 17.5 14.0 87.9 86.2 0.896 0.874 784 257 231 326 127 249

1752 D160M N/A 22.4 18.5 14.8 87.9 87.5 0.85 0.797 792 242 217 313 248 2491164 D160L N/A 23.5 19.4 15.5 87.3 87.3 0.814 0.754 696 195 175 333 37 293876 D180L N/A 24.8 20.5 16.4 87 87.1 0.774 0.702 657 230 207 297 571 399

20 15 3522 D160M N/A 28.3 23.3 18.7 88.9 88.2 0.907 0.887 777 243 218 327 148 2491752 D160L N/A 30.1 24.8 19.9 88.9 88.7 0.853 0.806 815 300 270 333 318 2931164 D180L N/A 31.0 25.6 20.5 89 89.1 0.827 0.779 640 213 191 303 571 399876 D200L N/A 33.1 27.3 21.9 88.6 88.5 0.778 0.712 625 186 167 298 1111 511

25 18.5 3522 D160L N/A 34.2 28.2 22.6 89.6 89.6 0.918 0.899 793 275 247 336 179 2931764 D180M N/A 35.1 29.0 23.2 90 90 0.891 0.847 757 245 220 315 462 3681170 D200L N/A 37.4 30.9 24.7 89.4 89.4 0.84 0.787 651 213 191 329 1033 511876 D225S N/A 40.7 33.7 26.9 89.6 89.4 0.77 0.71 680 200 180 300 1645 633

30 22 3528 D180M N/A 40.8 33.7 27.0 90.3 89.9 0.907 0.889 752 252 226 344 243 3681764 D180L N/A 43.7 36.1 28.9 88.8 91. 0.861 0.842 674 225 202 309 465 3991170 D200L N/A 44.2 36.6 29.2 89.4 89.8 0.845 0.811 669 217 195 316 1186 511876 D225M N/A 48.1 39.8 31.8 90.2 90 0.77 0.722 682 213 191 301 1815 710

40 30 3534 D200L N/A 55.6 45.9 36.7 91.1 90.6 0.90 0.879 742 266 239 346 407 5111764 D200L N/A 56.4 46.6 37.2 91.4 91.4 0.885 0.834 664 231 207 303 838 5111176 D225M N/A 58.7 48.5 38.8 91.2 91.1 0.852 0.826 612 235 211 284 1795 710876 D250M N/A 61.6 50.9 40.7 90.3 90.1 0.82 0.768 582 198 178 298 2766 849

50 37 3534 D200L N/A 66.8 55.2 44.1 91.5 90.7 0.92 0.898 782 248 223 298 2766 5111770 D225S N/A 70.0 57.8 46.3 91.9 91.8 0.874 0.842 658 221 198 306 1333 6331176 D250M N/A 71.2 58.8 47.0 91 90.7 0.868 0.831 688 212 190 323 2759 849882 D280S N/A 78.2 64.6 51.7 91 90.8 0.79 0.71 660 200 180 240 4722 1124

60 45 3540 D225M N/A 82.8 68.4 54.7 92 91.7 0.898 0.878 788 275 247 369 756 7101770 D225M N/A 83.7 69.1 55.3 92 91.7 0.888 0.862 743 209 188 314 1539 7101176 D280S N/A 86.4 71.4 57.1 92 91.6 0.86 0.83 700 230 207 270 4561 1124882 D280M N/A 94.6 78.1 62.5 91.5 91.1 0.79 0.71 660 200 180 240 5884 1323

75 55 3558 D250M N/A 101 83.7 66.9 92.5 91.4 0.892 0.863 770 195 175 368 1043 8491770 D250M N/A 102 83.9 67.2 92.5 92.1 0.889 0.86 685 223 200 316 2188 8491176 D280M N/A 105 87.0 69.6 92.3 91.8 0.86 0.83 700 230 207 270 5464 1323

100 75 3558 D280S N/A 135 111 88.9 93.1 92.3 0.91 0.89 780 220 200 250 1997 11241782 D280S N/A 140 116 92.8 93.3 92.6 0.87 0.85 750 220 200 240 3573 1124

120 90 3558 D280M N/A 161 133 106 93.4 92.7 0.91 0.89 780 220 200 250 2274 13231782 D280M N/A 168 139 111 93.7 93.2 0.87 0.85 750 220 200 240 4773 1323

Construction and Operating PrincipleThe magnet housing (1.1) of the spring applied brakecontains the permanently fitted energising coil (1.2)with its supply lead protruding from the brake periph-ery. In the adjustment ring (3) are fitted the pressuresprings (4), which push the friction rotor (7) via thearmature (2) against the static friction plate (8) andthus against the motor flange (11). The brakingeffect is achieved thereby. The air gap ‘A’ is adaptedby means of sleeves (9). The air gap ‘A’ cannot bere-adjusted. It is recommended to replace the frictionrotor (7) when it is worn (end of wear). The frictionrotor (7) has a star shaped bore (size 10,11 and 14)or a square bore (size 08, 13, 16 and 19) and canthus be glided axially on the hub (12). When applyinga DC current to the energising coil (1.2), a magneticforce is induced, compensating the effect of thespring. lifting the armature (2) and thereby releasingthe brake. No axial load is applied by the brake to theshaft that is to be decelerated

For larger frame sizes standard proprietary brake motors are available. For details contact Textron Power Transmission

0311

29

BRAKE MOTORS

BRAKE MOTORS

Condition upon DeliveryThe brake motor is supplied ready for use, ie the airgap ‘A’ is pre-set to the specified value at the factoryby means of the sleeves (9). The required nominaltorque M2 is also adjusted at the factory.

Textron Power Transmission brake motors aresuitable for 230V power supply.

7

9

2

8

12

A

HAND RELEASE(OPTIONAL)

3

6

1.2

4

1.1

5

1.1 Magnet Housing1.2 Engergising Coil2 Armature3 Adjustment Ring4 Spring5 Fixing Screws6 Fan Cowl7 Friction Rotor8 Friction Plate9 Adjustment Sleeves10 Sealing Cover (optional)11 Motor Flange12 Hub

MOTOR FRAME SIZE 63 71 80 90 100 112 132S 132M 160

BRAKE SIZE 08 08 10 11 13 14 14 16 19

BRAKE TORQUE (M2) lb.in 22 45 88 177 354 575 595 885 1500

COUPLING TIME (t1) Ms 18 18 20 30 45 86 86 90 130

øg6

øg6

øm

øm

øn

øn

ød

ød

øg

øg

g2

45o

g2

e

e

ko

ko

kbr g1

kbr22

.5o

g1

B14 'C' FACE

MOTORFRAME SIZE øg6 øm øn ød e ko kbr øg g1 g2

FIXINGBOLTS

MOTORFRAME SIZE

øg6 øm øn ød e ko kbr øg g1 g2 FIXINGBOLTS

B5 'D' FLANGE

These dimensions apply to Textron Power Transmission standard motors

0311

30

IEC MOTOR DETAILS

These dimensions apply to Textron Power Transmission standard motors

71 4.13 3.35 2.76 0.55 1.18 8.68 10.43 5.43 4.49 6.57 4xM680A 4.72 3.94 3.15 0.75 1.57 9.39 11.46 6.18 4.90 7.48 4xM680B 4.72 3.94 3.15 0.75 1.57 9.74 11.81 6.18 4.90 7.48 4xM690S 5.51 4.53 3.74 0.94 1.97 10.24 12.28 6.97 5.24 8.58 4xM890L 5.51 4.53 3.74 0.94 1.97 10.83 12.87 6.97 5.24 8.58 4xM890LA 5.51 4.53 3.74 0.94 1.97 11.18 13.23 6.97 5.24 8.58 4xM8

100L 6.30 5.12 4.33 1.10 2.36 12.20 14.57 7.76 5.67 9.37 4xM8112M 6.30 5.12 4.33 1.10 2.36 12.80 15.71 8.62 6.10 9.37 4xM8112MA 6.30 5.12 4.33 1.10 2.36 13.54 16.50 8.62 6.10 9.37 4xM8132SA 7.87 6.50 5.12 1.50 3.15 15.43 18.70 9.25 6.77 11.34 4xM10132M 7.87 6.50 5.12 1.50 3.15 16.22 19.49 9.25 6.77 11.34 4xM10132MA 7.87 6.50 5.12 1.50 3.15 17.17 20.43 9.25 6.77 11.34 4xM10132MB 7.87 6.50 5.12 1.50 3.15 18.58 21.85 9.25 6.77 11.34 4xM10

63 5.51 4.53 3.74 0.43 0.91 8.58 10.35 4.80 4.23 6.30 4xM871 6.30 5.12 4.33 0.55 1.18 8.68 10.43 5.43 4.49 6.57 4xM880A 7.87 6.50 5.12 0.75 1.57 9.39 11.46 6.18 4.90 7.48 4xM1080B 7.87 6.50 5.12 0.75 1.57 9.74 11.81 6.18 4.90 7.48 4xM1090S 7.87 6.50 5.12 0.94 1.97 10.24 12.28 6.97 5.24 8.58 4xM1090L 7.87 6.50 5.12 0.94 1.97 10.83 12.87 6.97 5.24 8.58 4xM1090LA 7.87 6.50 5.12 0.94 1.97 11.18 13.23 6.97 5.24 8.58 4xM10

100L 9.84 8.46 7.09 1.10 2.36 12.20 14.57 7.76 5.67 9.37 4xM12112M 9.84 8.46 7.09 1.10 2.36 12.80 15.71 8.62 6.10 9.37 4xM12112MA 9.84 8.46 7.09 1.10 2.36 13.54 16.50 8.62 6.10 9.37 4xM12132SA 11.81 10.43 9.06 1.50 3.15 15.43 18.70 9.25 6.77 11.34 4xM12132M 11.81 10.43 9.06 1.50 3.15 16.22 19.49 9.25 6.77 11.34 4xM12132MA 11.81 10.43 9.06 1.50 3.15 17.17 20.43 9.25 6.77 11.34 4xM12132MB 11.81 10.43 9.06 1.50 3.15 18.58 21.85 9.25 6.77 11.34 4xM12160M 13.78 11.81 9.84 1.65 4.33 17.91 21.18 10.75 11.10 12.72 4xM16160L 13.78 11.81 9.84 1.65 4.33 19.69 22.95 10.75 11.10 12.72 4xM16180M 13.78 11.81 9.84 1.89 4.33 21.93 - 15.04 12.09 - 4xM16180L 13.78 11.81 9.84 1.89 4.33 23.43 - 15.04 12.09 - 4xM16200L 15.75 13.78 11.81 2.17 4.33 25.91 - 16.54 14.65 - 4xM16225S 17.72 15.75 13.78 2.36 5.51 26.42 - 18.03 16.81 - 8xM16225M 17.72 15.75 13.78 2.36 5.51 27.40 - 18.03 16.81 - 8xM16250M 21.65 19.69 17.72 2.56 5.51 30.33 - 20.08 19.29 - 8xM16280S 21.65 19.69 17.72 2.95 5.51 32.95 - 22.68 20.47 - 8xM16280M 21.65 19.69 17.72 2.95 5.51 34.96 - 22.68 20.47 - 8xM16

CC

CC

øFP

øFP

øU

øU

AH

AH

øAK

øAK

øAJ

øAJ

øBD

øBD

BF4 HOLES

BF4 HOLES

56C 6.50 5.88 4.5 0.625 2.06 12.00 7.19 0.38

143TC/145TC 6.50 5.88 4.5 0.875 2.13 12.00 7.19 0.38

MOTORFRAME

SIZEø AKø BD ø AJ ø U AH KO max ø g

BFTAP UNC

0311

31

NEMA MOTOR DETAILS

182TC/184TC 9.00 7.25 8.5 1.125 2.63 15.50 8.50 0.50

213TC/215TC 9.00 7.25 8.5 1.375 3.13 16.50 10.19 0.50

254TC/256TC 10.00 7.25 8.5 1.625 3.75 20.00 12.50 0.50

284TC/286TC 11.25 9.00 10.5 1.875 4.38 23.25 15.56 0.50

324TC/326TC 13.38 11.00 12.5 2.125 5.00 25.25 16.94 0.63

364TC/365TC 13.38 11.00 12.5 2.375 5.63 27.00 19.00 0.63

404TC/405TC 13.88 11.00 12.5 2.875 7.00 30.00 20.63 0.63

MOTORFRAME

SIZEø AKø BD ø AJ ø U AH KO max ø g

BFTAP UNC

These dimensions apply to Textron Power Transmission Standard NEMA Motors

These dimensions apply to Textron Power Transmission Standard NEMA Motors

Standard NEMA Motors

ø g

ø g

BrakeMotor

Hand Releaseon Brake

Special

ADDITIONAL MOTOR FEATURES - COLUMN 19 ENTRY

Column 19Entry

0311

32

ADDITIONAL MOTOR FEATURES

Please refer to Textron Power Transmission for details of the following additional motor features

- PGF encoder flange- Wash down- Customised brake torque- Separate brake supply- Aluminum fan- Anti Condensation heater- Bi-metal temperature detectors, Thermostat- EExEIIT3- Ex nA II T3- IP56- IP65- Metal fan cover- Rain cowl- Separate terminal box- IP55

ThermistorsForced Ventilation /

Constant Blower(TECB)

-

A

B

C

D

E

F

G

H

K

L

M

S

•• •

•• •• • •

•• •• • •

• •• • •• • • •

•

DoubleOil

Seals

Oil LevelGlass

Special

ADDITIONAL GEARBOX FEATURES - COLUMN 20 ENTRY

Column 20Entry

Motorized Backstop

33

ADDITIONAL GEARBOX FEATURES

-

A

B

C

D

E

F

G

H

I

J

K

L

••

• ••

• •• •

• • ••

• •• •

• • ••

0102

CW Rotation CCW Rotation

Please refer to Textron Power Transmission for details of the following additional gearbox features

- Prime paint only- Wash down- BISSC compatible- Special oil (food compatible, bio-degradable, different viscosities etc)

SELECTION TABLESGEARED MOTORS

N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed

Column Entry 1 Through 20


NOTE

Other outputspeeds areavailableusing 2, 6 and8 pole motors- ConsultTextron PowerTransmission

4 POLE

0.16 HP

34

443 3.75 21 22.42 366 M 0 1 2 2 3 . 6 _ M _ - _ _ . 1 6 B - - 29.7 63328 5.07 29 18.92 388 5 . 0288 5.76 33 17.57 397 5 . 6254 6.53 38 16.22 409 6 . 3199 8.35 49 13.91 427 8 . 0185 9 52 13.12 427 9 . 0146 11.36 66 10.89 427 1 1 .129 12.88 75 9.78 427 1 2 .113 14.71 86 8.82 427 1 4 .101 16.37 95 8.19 427 1 6 .92 18.05 105 7.5 427 1 8 .84 19.86 116 6.82 427 2 0 .71 23.27 136 5.83 427 2 2 .59 27.92 163 4.87 427 2 8 .51 32.54 189 4.18 427 3 2 .46 36.16 210 3.77 427 3 6 .38 43.54 253 2.92 427 4 5 .33 49.91 290 2.19 427 5 0 .29 56.72 330 1.89 427 5 6 .

28 58.46 334 2.38 427 M 0 1 3 2 5 6 . _ M _ - _ _ . 1 6 B - - 31.9 6326 64.45 370 2.15 427 6 3 .23 70.93 406 1.96 427 7 1 .20 83.1 476 1.67 428 8 0 .17 99.7 571 1.39 428 1 0 014 116.22 666 1.19 418 1 1 213 129.13 740 1.07 402 1 2 511 155.51 892 0.89 310 1 6 0

26 62.87 363 3.9 899 M 0 2 3 2 6 3 . _ M _ - _ _ . 1 6 B - - 38.6 6324 69.19 399 3.55 899 7 1 .20 81.07 467 3.03 899 8 0 .17 97.26 560 2.53 899 1 0 015 113.37 652 2.17 899 1 1 213 125.97 724 1.96 899 1 2 511 151.69 873 1.62 899 1 6 010 173.87 1000 1.42 899 1 8 08.4 197.6 1134 1.25 900 2 0 0

20 81.07 468 3.95 899 M 0 3 3 2 8 0 . _ M _ - _ _ . 1 6 B - - 38.6 6317 97.26 560 3.3 899 1 0 015 113.37 653 2.83 900 1 1 213 125.97 724 2.55 900 1 2 511 151.69 874 2.11 899 1 6 010 173.87 1002 1.84 900 1 8 08.4 197.6 1134 1.63 901 2 0 0

7.1 234.96 1310 1.41 680 M 0 3 4 2 2 2 5 _ M _ - _ _ . 1 6 B - - 58.4 636.4 261.37 1454 1.27 680 2 5 05.8 287.83 1600 1.16 680 2 8 05.2 317.33 1768 1.05 680 3 0 04.5 365.01 2025 0.91 680 3 6 04.1 401.7 2230 0.83 680 4 0 0

13 130.5 752 3.98 1618 M 0 4 3 2 1 2 5 _ M _ - _ _ . 1 6 B - - 58.4 6311 151.71 877 3.41 1618 1 6 010 172.19 992 3.01 1618 1 8 08.5 195.75 1126 2.66 1619 2 0 0

464 3.58 21 18.84 696 M 0 5 1 2 3 . 6 _ M _ - _ _ . 1 6 B - - 27.5 63421 3.94 23 17.57 696 4 . 0366 4.53 27 15.5 696 4 . 5337 4.93 29 14.55 696 5 . 0281 5.92 35 12.48 696 6 . 0234 7.1 42 10.41 696 7 . 1208 8 47 9.38 696 8 . 0

10 172.19 995 4 1619 M 0 5 3 2 1 8 0 _ M _ - _ _ . 1 6 B - - 60.6 638.5 195.75 1128 3.53 1619 2 0 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

0.25 HP

35

446 3.75 34 14.45 363 M 0 1 2 2 3 . 6 _ _ - _ _ . 2 5 B - - 29.7 63 56C330 5.07 46 12.2 385 5 . 0290 5.76 52 11.33 393 5 . 6256 6.53 59 10.46 404 6 . 3200 8.35 76 8.97 421 8 . 0186 9 81 8.46 420 9 . 0147 11.36 103 7.02 420 1 1 .130 12.88 117 6.3 418 1 2 .114 14.71 134 5.69 420 1 4 .102 16.37 148 5.28 418 1 6 .93 18.05 164 4.83 414 1 8 .84 19.86 180 4.4 424 2 0 .72 23.27 211 3.76 417 2 2 .60 27.92 253 3.14 404 2 8 .51 32.54 294 2.7 409 3 2 .46 36.16 326 2.43 398 3 6 .38 43.54 393 1.88 399 4 5 .34 49.91 450 1.41 427 5 0 .29 56.72 512 1.22 420 5 6 .

29 58.46 518 1.53 420 M 0 1 3 2 5 6 . _ _ - _ _ . 2 5 B - - 31.9 63 56C26 64.45 574 1.38 410 6 3 .24 70.93 630 1.26 385 7 1 .20 83.1 738 1.08 329 8 0 .17 99.7 886 0.9 314 1 0 0

40 41.49 376 3.76 899 M 0 2 2 2 4 5 . _ _ - _ _ . 2 5 B - - 36.4 63 56C36 47.09 427 3.32 899 5 0 .31 53.54 484 2.92 899 5 6 .

29 57.03 510 2.77 899 M 0 2 3 2 5 6 . _ _ - _ _ . 2 5 B - - 38.6 63 56C27 62.87 563 2.51 892 6 3 .24 69.19 619 2.29 899 7 1 .21 81.07 725 1.95 899 8 0 .17 97.26 868 1.63 845 1 0 015 113.37 1012 1.4 899 1 1 213 125.97 1123 1.26 899 1 2 511 151.69 1354 1.05 837 1 6 010 173.87 1552 0.91 899 1 8 08.5 197.6 1759 0.8 807 2 0 0

31 53.54 485 3.76 900 M 0 3 2 2 5 6 . _ _ - _ _ . 2 5 B - - 36.4 63 56C

29 57.03 510 3.62 901 M 0 3 3 2 5 6 . _ _ - _ _ . 2 5 B - - 38.6 63 56C27 62.87 563 3.28 902 6 3 .24 69.19 620 2.98 900 7 1 .21 81.07 726 2.55 840 8 0 .17 97.26 869 2.13 845 1 0 015 113.37 1013 1.82 786 1 1 213 125.97 1124 1.65 740 1 2 511 151.69 1356 1.36 837 1 6 010 173.87 1555 1.19 741 1 8 08.5 197.6 1760 1.05 639 2 0 0

7.1 234.96 2033 0.91 680 M 0 3 4 2 2 2 5 _ _ - _ _ . 2 5 B - - 58.4 63 56C6.4 261.37 2257 0.82 680 2 5 0

17 96.52 866 3.45 1618 M 0 4 3 2 1 0 0 _ _ - _ _ . 2 5 B - - 58.4 63 56C14 115.82 1036 2.89 1618 1 1 213 130.5 1167 2.56 1610 1 2 511 151.71 1360 2.2 1618 1 6 010 172.19 1540 1.94 1608 1 8 08.5 195.75 1747 1.71 1554 2 0 0

7.2 232.81 2021 1.48 1601 M 0 4 4 2 2 2 5 _ _ - _ _ . 2 5 B - - 84.9 63 56C6.4 260.47 2252 1.33 1601 2 5 06 277.62 2399 1.25 1601 2 8 05.5 305.72 2646 1.13 1601 3 0 04.6 362.32 3119 0.96 1601 3 6 04 416.75 3590 0.83 1601 4 0 0

467 3.58 33 12.15 696 M 0 5 1 2 3 . 6 _ _ - _ _ . 2 5 B - - 27.5 63 56C424 3.94 36 11.33 695 4 . 0369 4.53 42 9.99 695 4 . 5339 4.93 45 9.38 695 5 . 0283 5.92 54 8.05 696 6 . 0235 7.1 65 6.71 696 7 . 1209 8 73 6.05 696 8 . 0

14 115.82 1038 3.83 1621 M 0 5 3 2 1 1 2 _ _ - _ _ . 2 5 B - - 60.6 63 56C13 130.5 1170 3.4 1623 1 2 511 151.71 1361 2.93 1623 1 6 010 172.19 1545 2.58 1504 1 8 08.5 195.75 1750 2.28 1523 2 0 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

0.25 HP

36

7.2 232.81 2033 1.96 1081 M 0 5 4 2 2 2 5 _ _ - _ _ . 2 5 B - - 89.3 63 56C6.4 260.47 2266 1.76 1081 2 5 06 277.62 2415 1.65 1081 2 8 05.5 305.72 2663 1.49 1081 3 0 04.6 362.32 3143 1.27 1081 3 6 04 416.75 3616 1.1 1081 4 0 03.8 444.96 3854 1.03 1081 4 5 03.5 483.76 4190 0.95 1081 5 0 0

10 161.57 1449 3.82 1618 M 0 6 3 2 1 6 0 _ _ - _ _ . 2 5 B - - 71.6 63 56C8.9 187.83 1686 3.29 1618 1 8 07.8 213.18 1910 2.9 1618 2 0 0

7.8 215.23 1892 2.92 1618 M 0 6 4 2 2 2 5 _ _ - _ _ . 2 5 B - - 100.3 63 56C7.1 237.02 2085 2.65 1618 2 5 06.1 272.91 2391 1.96 1618 2 8 05.3 313.91 2749 1.7 1618 3 0 04.6 365.1 3195 1.65 1618 3 6 04.2 396.93 3473 1.52 1618 4 0 03.8 444.1 3877 1.43 1618 4 5 03.1 533.13 4651 1.19 1618 5 0 02.9 568.23 4958 1.12 1618 6 5 02.5 681.88 5942 0.93 1618 7 3 0

7.3 229 2012 3.82 1051 M 0 7 4 2 2 2 5 _ _ - _ _ . 2 5 B - - 115.7 63 56C6.4 259.68 2276 3.37 1051 2 5 05.8 286.42 2509 3.06 1051 2 8 05.3 315.41 2766 2.78 1051 3 0 04.6 361.21 3162 2.43 1051 3 6 04 415.49 3635 2.11 1051 4 0 03.6 469.77 4101 1.87 1051 4 5 03.3 510.72 4457 1.72 1051 5 0 02.8 592.12 5154 1.49 1051 6 5 02.4 710.84 6183 1.24 1051 7 3 02 847.84 7348 1.05 1050 8 6 01.6 1017.41 8809 0.87 1050 1 0 C

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


0.33 HP

4 POLE

37

455 3.75 44 11.18 361 M 0 1 2 2 3 . 6 _ _ - _ _ . 3 3 B - - 31.9 71 56C337 5.07 59 9.44 381 5 . 0296 5.76 67 8.77 389 5 . 6262 6.53 77 8.09 399 6 . 3205 8.35 98 6.94 415 8 . 0190 9 105 6.54 415 9 . 0150 11.36 133 5.43 414 1 1 .133 12.88 152 4.88 410 1 2 .116 14.71 173 4.4 415 1 4 .104 16.37 191 4.09 411 1 6 .95 18.05 212 3.74 403 1 8 .86 19.86 233 3.4 422 2 0 .73 23.27 273 2.91 409 2 2 .61 27.92 327 2.43 384 2 8 .52 32.54 380 2.09 393 3 2 .47 36.16 422 1.88 373 3 6 .39 43.54 508 1.46 373 4 5 .34 49.91 582 1.09 427 5 0 .30 56.72 661 0.94 413 5 6 .

29 58.46 670 1.19 413 M 0 1 3 2 5 6 . _ _ - _ _ . 3 3 B - - 34.1 71 56C26 64.45 742 1.07 395 6 3 .24 70.93 814 0.98 348 7 1 .21 83.1 954 0.83 242 8 0 .

54 31.68 371 3.81 899 M 0 2 2 2 3 2 . _ _ - _ _ . 3 3 B - - 40.8 71 56C48 35.69 418 3.39 899 3 6 .41 41.49 486 2.91 899 4 5 .36 47.09 551 2.57 893 5 0 .32 53.54 626 2.26 899 5 6 .

30 57.03 659 2.15 899 M 0 2 3 2 5 6 . _ _ - _ _ . 3 3 B - - 43 71 56C27 62.87 728 1.94 885 6 3 .25 69.19 800 1.77 899 7 1 .21 81.07 937 1.51 899 8 0 .18 97.26 1122 1.26 797 1 0 015 113.37 1307 1.08 899 1 1 214 125.97 1451 0.98 899 1 2 511 151.69 1750 0.81 782 1 6 0

41 41.49 485 3.56 899 M 0 3 2 2 4 5 . _ _ - _ _ . 3 3 B - - 40.8 71 56C36 47.09 552 3.2 893 5 0 .32 53.54 627 2.91 877 5 6 .

30 57.03 659 2.8 869 M 0 3 3 2 5 6 . _ _ - _ _ . 3 3 B - - 43 71 56C27 62.87 728 2.54 854 6 3 .25 69.19 801 2.31 874 7 1 .21 81.07 938 1.97 787 8 0 .18 97.26 1123 1.65 797 1 0 015 113.37 1310 1.41 684 1 1 214 125.97 1452 1.27 597 1 2 511 151.69 1753 1.06 782 1 6 010 173.87 2010 0.92 600 1 8 08.6 197.6 2275 0.81 406 2 0 0

27 64.29 748 3.96 1618 M 0 4 3 2 6 3 . _ _ - _ _ . 3 3 B - - 62.8 71 56C23 73.95 859 3.48 1618 7 1 .21 80.4 933 3.2 1618 8 0 .18 96.52 1119 2.67 1613 1 0 015 115.82 1339 2.23 1618 1 1 213 130.5 1508 1.98 1603 1 2 511 151.71 1758 1.7 1618 1 6 010 172.19 1990 1.5 1599 1 8 08.7 195.75 2258 1.32 1496 2 0 0

7.3 232.81 2612 1.15 1601 M 0 4 4 2 2 2 5 _ _ - _ _ . 3 3 B - - 89.3 71 56C6.6 260.47 2910 1.03 1601 2 5 06.2 277.62 3100 0.97 1601 2 8 05.6 305.72 3419 0.87 1601 3 0 0

477 3.58 42 9.4 695 M 0 5 1 2 3 . 6 _ _ - _ _ . 3 3 B - - 31.9 71 56C433 3.94 47 8.77 694 4 . 0377 4.53 54 7.73 694 4 . 5347 4.93 59 7.26 694 5 . 0289 5.92 70 6.23 696 6 . 0241 7.1 84 5.2 696 7 . 1214 8 95 4.68 696 8 . 0

18 96.52 1120 3.55 1618 M 0 5 3 2 1 0 0 _ _ - _ _ . 3 3 B - - 62.8 71 56C15 115.82 1342 2.97 1566 1 1 213 130.5 1512 2.63 1539 1 2 511 151.71 1758 2.26 1546 1 6 010 172.19 1996 1.99 1401 1 8 08.7 195.75 2261 1.76 1438 2 0 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

0.33 HP

38

7.3 232.81 2627 1.52 1081 M 0 5 4 2 2 2 5 _ _ - _ _ . 3 3 B - - 91.5 71 56C6.6 260.47 2929 1.36 1081 2 5 06.2 277.62 3120 1.28 1081 2 8 05.6 305.72 3441 1.16 1081 3 0 04.7 362.32 4061 0.98 1081 3 6 04.1 416.75 4672 0.85 1081 4 0 0

12 143.39 1663 3.33 1618 M 0 6 3 2 1 2 5 _ _ - _ _ . 3 3 B - - 73.8 71 56C11 161.57 1872 2.96 1618 1 6 09.1 187.83 2179 2.54 1618 1 8 08 213.18 2468 2.24 1618 2 0 0

7.9 215.23 2444 2.26 1618 M 0 6 4 2 2 2 5 _ _ - _ _ . 3 3 B - - 104.7 71 56C7.2 237.02 2695 2.05 1618 2 5 06.3 272.91 3090 1.51 1618 2 8 05.4 313.91 3552 1.32 1618 3 0 04.7 365.1 4129 1.28 1618 3 6 04.3 396.93 4488 1.18 1618 4 0 03.8 444.1 5010 1.11 1618 4 5 03.2 533.13 6010 0.92 1618 5 0 03 568.23 6406 0.86 1618 6 5 0

7.5 229 2600 2.95 1051 M 0 7 4 2 2 2 5 _ _ - _ _ . 3 3 B - - 120.1 71 56C6.6 259.68 2941 2.61 1051 2 5 06 286.42 3243 2.37 1051 2 8 05.4 315.41 3575 2.15 1051 3 0 04.7 361.21 4086 1.88 1051 3 6 04.1 415.49 4697 1.63 1051 4 0 03.6 469.77 5299 1.45 1051 4 5 03.3 510.72 5760 1.33 1051 5 0 02.9 592.12 6660 1.15 1051 6 5 02.4 710.84 7990 0.96 1051 7 3 02 847.84 9496 0.81 1050 8 6 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

0.50 HP

446 3.75 68 7.23 355 M 0 1 2 2 3 . 6 _ _ - _ _ . 5 0 B - - 31.9 71 56C330 5.07 92 6.1 374 5 . 0290 5.76 104 5.66 381 5 . 6256 6.53 119 5.23 390 6 . 3200 8.35 152 4.48 403 8 . 0186 9 163 4.23 403 9 . 0147 11.36 206 3.51 400 1 1 .130 12.88 235 3.15 394 1 2 .114 14.71 268 2.84 403 1 4 .102 16.37 296 2.64 395 1 6 .93 18.05 328 2.42 378 1 8 .84 19.86 361 2.2 418 2 0 .72 23.27 422 1.88 391 2 2 .60 27.92 506 1.57 341 2 8 .51 32.54 589 1.35 359 3 2 .46 36.16 653 1.21 318 3 6 .38 43.54 787 0.94 320 4 5 .

83 20.23 368 3.84 899 M 0 2 2 2 2 0 . _ _ - _ _ . 5 0 B - - 40.8 71 56C76 21.99 400 3.54 899 2 2 .63 26.4 480 2.95 899 2 8 .53 31.68 575 2.46 889 3 2 .47 35.69 647 2.19 899 3 6 .40 41.49 752 1.88 899 4 5 .36 47.09 854 1.66 880 5 0 .31 53.54 969 1.46 899 5 6 .

29 57.03 1021 1.39 899 M 0 2 3 2 5 6 . _ _ - _ _ . 5 0 B - - 43 71 56C27 62.87 1127 1.26 872 6 3 .24 69.19 1239 1.14 899 7 1 .21 81.07 1450 0.98 899 8 0 .17 97.26 1737 0.81 694 1 0 0

63 26.4 481 3.84 870 M 0 3 2 2 2 8 . _ _ - _ _ . 5 0 B - - 40.8 71 56C53 31.68 572 3.23 832 3 2 .47 35.69 644 2.87 855 3 6 .40 41.49 750 2.3 899 4 5 .36 47.09 854 2.07 880 5 0 .31 53.54 970 1.88 826 5 6 .

29 57.03 1021 1.81 802 M 0 3 3 2 5 6 . _ _ - _ _ . 5 0 B - - 43 71 56C27 62.87 1127 1.64 752 6 3 .24 69.19 1240 1.49 817 7 1 .21 81.07 1452 1.27 674 8 0 .17 97.26 1739 1.06 694 1 0 015 113.37 2027 0.91 469 1 1 213 125.97 2248 0.82 294 1 2 5

29 58.38 1045 2.74 1618 M 0 4 3 2 5 6 . _ _ - _ _ . 5 0 B - - 62.8 71 56C26 64.29 1158 2.56 1611 6 3 .23 73.95 1329 2.25 1618 7 1 .21 80.4 1444 2.07 1618 8 0 .17 96.52 1732 1.73 1603 1 0 014 115.82 2073 1.44 1617 1 1 213 130.5 2334 1.28 1588 1 2 511 151.71 2721 1.1 1618 1 6 010 172.19 3080 0.97 1579 1 8 08.5 195.75 3495 0.86 1373 2 0 0

467 3.58 66 6.07 693 M 0 5 1 2 3 . 6 _ _ - _ _ . 5 0 B - - 31.9 71 56C424 3.94 73 5.66 692 4 . 0369 4.53 84 5 691 4 . 5339 4.93 91 4.69 691 5 . 0283 5.92 109 4.02 696 6 . 0235 7.1 131 3.36 696 7 . 1209 8 147 3.02 696 8 . 0

29 58.38 1050 3.79 1617 M 0 5 3 2 5 6 . _ _ - _ _ . 5 0 B - - 62.8 71 56C26 64.29 1159 3.43 1616 6 3 .23 73.95 1328 3 1616 7 1 .21 80.4 1452 2.74 1616 8 0 .17 96.52 1734 2.3 1578 1 0 014 115.82 2077 1.92 1450 1 1 213 130.5 2340 1.7 1361 1 2 511 151.71 2722 1.46 1383 1 6 010 172.19 3090 1.29 1183 1 8 08.5 195.75 3500 1.14 1257 2 0 0

7.2 232.81 4066 0.98 1081 M 0 5 4 2 2 2 5 _ _ - _ _ . 5 0 B - - 91.5 71 56C6.4 260.47 4533 0.88 1081 2 5 06 277.62 4830 0.82 1081 2 8 0

21 79.6 1437 3.66 1618 M 0 6 3 2 7 1 . _ _ - _ _ . 5 0 B - - 73.8 71 56C18 91.56 1652 3.31 1618 8 0 .17 99.54 1786 3.1 1618 1 0 014 119.5 2140 2.59 1618 1 1 212 143.39 2574 2.15 1618 1 2 510 161.57 2898 1.91 1618 1 6 08.9 187.83 3373 1.64 1618 1 8 07.8 213.18 3820 1.45 1618 2 0 0

7.8 215.23 3784 1.46 1618 M 0 6 4 2 2 2 5 _ _ - _ _ . 5 0 B - - 104.7 71 56C7.1 237.02 4171 1.33 1618 2 5 06.1 272.91 4782 0.98 1618 2 8 05.3 313.91 5498 0.85 1618 3 0 04.6 365.1 6391 0.83 1618 3 6 0

7.3 229 4025 1.91 1051 M 0 7 4 2 2 2 5 _ _ - _ _ . 5 0 B - - 120.1 71 56C6.4 259.68 4552 1.69 1051 2 5 05.8 286.42 5019 1.53 1051 2 8 05.3 315.41 5533 1.39 1051 3 0 04.6 361.21 6324 1.21 1051 3 6 04 415.49 7271 1.06 1051 4 0 03.6 469.77 8203 0.94 1051 4 5 03.3 510.72 8915 0.86 1051 5 0 0

39

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

0.75 HP

40

462 3.75 98 4.99 348 M 0 1 2 2 3 . 6 _ _ - _ _ . 7 5 B - - 40.7 80A 56C342 5.07 133 4.21 364 5 . 0301 5.76 151 3.91 369 5 . 6265 6.53 172 3.61 377 6 . 3207 8.35 220 3.1 386 8 . 0193 9 237 2.92 385 9 . 0152 11.36 298 2.42 381 1 1 .135 12.88 340 2.18 370 1 2 .118 14.71 388 1.96 385 1 4 .106 16.37 429 1.82 372 1 6 .96 18.05 475 1.67 343 1 8 .87 19.86 522 1.52 411 2 0 .74 23.27 612 1.3 365 2 2 .62 27.92 733 1.08 279 2 8 .53 32.54 852 0.93 310 3 2 .48 36.16 946 0.84 238 3 6 .

99 17.58 464 2.96 899 M 0 2 2 2 1 8 . _ _ - _ _ . 7 5 B - - 49.6 80A 56C86 20.23 533 2.65 890 2 0 .79 21.99 579 2.44 883 2 2 .66 26.4 695 2.04 899 2 8 .55 31.68 832 1.7 874 3 2 .49 35.69 937 1.51 899 3 6 .42 41.49 1090 1.3 899 4 5 .37 47.09 1236 1.14 860 5 0 .32 53.54 1403 1.01 899 5 6 .

30 57.03 1479 0.96 899 M 0 2 3 2 5 6 . _ _ - _ _ . 7 5 B - - 51.8 80A 56C28 62.87 1633 0.87 852 6 3 .

99 17.58 464 3.75 819 M 0 3 2 2 1 8 . _ _ - _ _ . 7 5 B - - 49.6 80A 56C86 20.23 533 3.42 796 2 0 .79 21.99 580 3.19 873 2 2 .66 26.4 696 2.65 840 2 8 .55 31.68 829 2.23 764 3 2 .49 35.69 933 1.98 810 3 6 .42 41.49 1087 1.59 899 4 5 .37 47.09 1237 1.43 860 5 0 .32 53.54 1405 1.3 752 5 6 .

30 57.03 1478 1.25 703 M 0 3 3 2 5 6 . _ _ - _ _ . 7 5 B - - 51.8 80A 56C28 62.87 1633 1.13 603 6 3 .25 69.19 1796 1.03 733 7 1 .21 81.07 2103 0.88 508 8 0 .

63 27.3 722 3.86 1589 M 0 4 2 2 2 8 . _ _ - _ _ . 7 5 B - - 67.2 80A 56C54 32.19 847 3.36 1618 3 2 .49 35.25 931 3.1 1618 3 6 .40 43.2 1132 2.6 1618 4 5 .36 48.15 1261 2.37 1618 5 0 .32 54 1416 1.69 1618 5 6 .

30 58.38 1514 1.89 1616 M 0 4 3 2 5 6 . _ _ - _ _ . 7 5 B - - 71.6 80A 56C27 64.29 1677 1.77 1601 6 3 .23 73.95 1925 1.55 1618 7 1 .22 80.4 2092 1.43 1618 8 0 .18 96.52 2508 1.19 1587 1 0 015 115.82 3002 1 1616 1 1 213 130.5 3380 0.88 1567 1 2 5

484 3.58 96 4.19 691 M 0 5 1 2 3 . 6 _ _ - _ _ . 7 5 B - - 38.5 80A 56C439 3.94 106 3.91 688 4 . 0382 4.53 122 3.45 688 4 . 5351 4.93 132 3.24 687 5 . 0293 5.92 158 2.78 696 6 . 0244 7.1 190 2.32 696 7 . 1217 8 214 2.09 696 8 . 0

54 32.19 847 3.36 1607 M 0 5 2 2 3 2 . _ _ - _ _ . 7 5 B - - 69.4 80A 56C49 35.25 931 3.1 1618 3 6 .40 43.2 1132 2.6 1618 4 5 .36 48.15 1263 2.39 1618 5 0 .32 54 1416 1.69 1618 5 6 .

30 58.38 1520 2.62 1527 M 0 5 3 2 5 6 . _ _ - _ _ . 7 5 B - - 71.6 80A 56C27 64.29 1679 2.37 1490 6 3 .23 73.95 1923 2.07 1510 7 1 .22 80.4 2103 1.89 1464 8 0 .18 96.52 2511 1.59 1518 1 0 015 115.82 3008 1.32 1278 1 1 213 130.5 3389 1.18 1099 1 2 511 151.71 3941 1.01 1142 1 6 010 172.19 4474 0.89 862 1 8 0

32 53.49 1408 3.26 1618 M 0 6 2 2 5 0 . _ _ - _ _ . 7 5 B - - 80.4 80A 56C29 59.61 1567 2.65 1618 5 6 .

24 72.28 1885 2.85 1618 M 0 6 3 2 6 3 . _ _ - _ _ . 7 5 B - - 82.6 80A 56C22 79.6 2081 2.53 1618 7 1 .19 91.56 2392 2.28 1618 8 0 .17 99.54 2587 2.14 1618 1 0 014 119.5 3099 1.79 1618 1 1 212 143.39 3727 1.49 1618 1 2 511 161.57 4196 1.32 1618 1 6 09.2 187.83 4884 1.13 1618 1 8 08.1 213.18 5531 1 1618 2 0 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

0.75 HP

41

8 215.23 5479 1.01 1618 M 0 6 4 2 2 2 5 _ _ - _ _ . 7 5 B - - 111.3 80A 56C7.3 237.02 6041 0.92 1618 2 5 0

32 53.96 1410 3.73 2248 M 0 7 2 2 5 6 . _ _ - _ _ . 7 5 B - - 95.9 80A 56C

28 62.83 1636 3.91 2248 M 0 7 3 2 6 3 . _ _ - _ _ . 7 5 B - - 106.9 80A 56C23 74.47 1942 3.49 2248 7 1 .22 79.51 2069 3.34 2248 8 0 .18 98.66 2564 2.9 2248 1 0 015 116.34 3035 2.53 2249 1 1 214 127.39 3313 2.32 2249 1 2 511 156.12 4057 1.89 2249 1 6 010 174.01 4512 1.7 2250 1 8 08.9 195.15 5053 1.52 2183 2 0 0

7.6 229 5828 1.32 1051 M 0 7 4 2 2 2 5 _ _ - _ _ . 7 5 B - - 126.7 80A 56C6.7 259.68 6592 1.16 1051 2 5 06 286.42 7268 1.06 1051 2 8 05.5 315.41 8013 0.96 1051 3 0 04.8 361.21 9158 0.84 1051 3 6 0

11 160.45 4167 3.61 4496 M 0 8 3 2 1 6 0 _ _ - _ _ . 7 5 B - - 168.6 80A 56C10 175.21 4546 3.31 4497 1 8 08.6 201.75 5216 2.88 4496 2 0 0

7.6 228.91 5808 2.08 4252 M 0 8 4 2 2 2 5 _ _ - _ _ . 7 5 B - - 232.5 80A 56C6.7 258.98 6562 1.97 4017 2 5 05.8 301.21 7633 1.7 4017 2 8 05.1 337.01 8531 1.52 4017 3 0 04.8 359.19 9103 1.42 4017 3 6 04.1 425.69 10787 1.2 4017 4 0 03.6 480.51 12157 1.12 3775 4 5 03.4 513.04 12979 1.05 3775 5 0 02.8 621.92 15685 0.93 3407 6 5 0

7.5 231.06 5934 3.94 5780 M 0 9 4 1 2 2 5 _ _ - _ _ . 7 5 B - - 329.5 80A 56C6.7 258.09 6620 3.82 5609 2 5 05.8 300.18 7697 3.29 5609 2 8 05.2 335.85 8600 2.94 5609 3 0 04.8 357.95 9175 2.76 5609 3 6 04.1 424.23 10866 2.33 5609 4 0 03.7 471.32 12055 2.1 5609 4 5 03.4 503.22 12867 1.97 5609 5 0 02.8 624.45 15949 1.59 5609 6 5 02.4 736.35 18785 1.35 5609 7 3 02 882.06 22416 1.13 5609 8 6 01.7 1040.13 26410 0.96 5609 1 0 C1.5 1148.27 29146 0.87 5609 1 1 C

4.3 398.71 10165 3.84 9347 M 1 0 4 1 4 0 0 _ _ - _ _ . 7 5 B - - 466.2 80A 56C3.9 443.06 11278 3.46 9347 4 5 03.5 500.94 12745 3.06 9347 5 0 03 580.78 14766 2.64 9347 6 5 02.5 692.72 17593 2.22 9347 7 3 02.1 828.21 20964 1.86 9347 8 6 01.8 987.84 24987 1.56 9347 1 0 C1.5 1138.21 28716 1.36 9347 1 1 C1.4 1246.47 31433 1.24 9347 1 3 C1.1 1539.39 38551 0.98 9423 1 5 C1 1685.8 42209 0.89 9423 1 8 C

2.9 607.22 15412 3.65 14529 M 1 3 4 1 6 5 0 _ _ - _ _ . 7 5 B - - 629.4 80A 56C2.4 724.25 18361 3.06 14529 7 3 02 858.69 21640 2.6 14529 8 6 01.7 1024.19 25787 2.18 14529 1 0 C1.5 1140.7 28660 1.96 14529 1 1 C1.4 1249.19 31367 1.79 14529 1 3 C1.1 1528.11 38235 1.5 14543 1 5 C0.94 1833.73 45807 1.25 14543 1 8 C0.82 2109.78 52673 1.09 14543 2 0 C0.74 2344.2 58447 0.98 14543 2 4 C

0.68 2535.33 62458 0.9 14529 M 1 3 5 1 2 7 C _ _ - _ _ . 7 5 B - - 640.4 80A 56C

1.6 1108.37 27966 3.37 18122 M 1 4 4 1 1 1 C _ _ - _ _ . 7 5 B - - 885.1 80A 56C1.4 1213.79 30602 3.08 18122 1 3 C1.2 1502.21 37769 2.37 18144 1 5 C0.96 1802.65 45233 1.98 18144 1 8 C0.84 2074.02 52001 1.72 18144 2 0 C0.75 2304.47 57692 1.55 18144 2 4 C0.61 2844.21 71137 1.15 18144 2 7 C

0.63 2743.72 68025 1.39 18122 M 1 4 5 1 2 7 C _ _ - _ _ . 7 5 B - - 896.1 80A 56C0.51 3404.7 84326 1.12 18122 3 2 C0.43 4014.85 99319 0.95 18122 3 6 C0.39 4396.19 108664 0.87 18122 4 0 C

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


1.0 HP

42

4 POLE 457 3.75 133 3.7 340 M 0 1 2 2 3 . 6 _ _ - _ _ 1 . 0 B - - 40.7 80A 143TC338 5.07 180 3.12 353 5 . 0297 5.76 204 2.9 358 5 . 6262 6.53 232 2.68 363 6 . 3205 8.35 297 2.3 369 8 . 0190 9 319 2.16 367 9 . 0151 11.36 402 1.8 362 1 1 .133 12.88 459 1.61 347 1 2 .116 14.71 524 1.46 368 1 4 .105 16.37 579 1.35 349 1 6 .95 18.05 641 1.24 307 1 8 .86 19.86 705 1.13 404 2 0 .74 23.27 825 0.96 339 2 2 .61 27.92 988 0.8 216 2 8 .

188 9.09 324 3.71 899 M 0 2 2 2 9 . 0 _ _ - _ _ 1 . 0 B - - 49.6 80A 143TC153 11.15 398 3.14 899 1 1 .138 12.37 441 2.89 899 1 2 .122 14.05 500 2.6 899 1 4 .107 15.97 567 2.4 899 1 6 .97 17.58 626 2.19 899 1 8 .85 20.23 719 1.97 882 2 0 .78 21.99 782 1.81 868 2 2 .65 26.4 938 1.51 899 2 8 .54 31.68 1123 1.26 859 3 2 .48 35.69 1263 1.12 899 3 6 .41 41.49 1470 0.96 899 4 5 .36 47.09 1668 0.85 840 5 0 .

153 11.15 398 3.78 899 M 0 3 2 2 1 1 . _ _ - _ _ 1 . 0 B - - 49.6 80A 143TC138 12.37 441 3.53 899 1 2 .122 14.05 499 3.24 899 1 4 .107 15.97 569 3.02 799 1 6 .97 17.58 626 2.78 779 1 8 .85 20.23 720 2.53 745 2 0 .78 21.99 783 2.36 859 2 2 .65 26.4 940 1.97 810 2 8 .54 31.68 1119 1.65 696 3 2 .48 35.69 1258 1.47 766 3 6 .41 41.49 1466 1.18 899 4 5 .36 47.09 1669 1.06 840 5 0 .32 53.54 1896 0.96 679 5 6 .

30 57.03 1994 0.93 604 M 0 3 3 2 5 6 . _ _ - _ _ 1 . 0 B - - 51.8 80A 143TC27 62.87 2203 0.84 454 6 3 .

83 20.61 735 3.61 1438 M 0 4 2 2 2 0 . _ _ - _ _ 1 . 0 B - - 67.2 80A 143TC78 22 783 3.42 1465 2 2 .63 27.3 974 2.86 1558 2 8 .53 32.19 1143 2.49 1587 3 2 .49 35.25 1256 2.3 1582 3 6 .40 43.2 1528 1.93 1608 4 5 .36 48.15 1701 1.76 1604 5 0 .32 54 1911 1.25 1618 5 6 .

29 58.38 2042 1.4 1615 M 0 4 3 2 5 6 . _ _ - _ _ 1 . 0 B - - 71.6 80A 143TC27 64.29 2262 1.31 1591 6 3 .23 73.95 2597 1.15 1618 7 1 .21 80.4 2822 1.06 1618 8 0 .18 96.52 3383 0.88 1571 1 0 0

478 3.58 129 3.11 689 M 0 5 1 2 3 . 6 _ _ - _ _ 1 . 0 B - - 38.5 80A 143TC434 3.94 143 2.9 685 4 . 0378 4.53 164 2.56 684 4 . 5347 4.93 178 2.4 683 5 . 0289 5.92 214 2.06 696 6 . 0241 7.1 256 1.72 696 7 . 1214 8 288 1.55 696 8 . 0

53 32.19 1143 2.49 1544 M 0 5 2 2 3 2 . _ _ - _ _ 1 . 0 B - - 69.4 80A 143TC49 35.25 1256 2.3 1571 3 6 .40 43.2 1528 1.93 1524 4 5 .36 48.15 1704 1.77 1579 5 0 .32 54 1911 1.25 1601 5 6 .

29 58.38 2051 1.94 1438 M 0 5 3 2 5 6 . _ _ - _ _ 1 . 0 B - - 71.6 80A 143TC27 64.29 2265 1.76 1363 6 3 .23 73.95 2594 1.53 1403 7 1 .21 80.4 2837 1.4 1313 8 0 .18 96.52 3388 1.18 1459 1 0 015 115.82 4058 0.98 1106 1 1 213 130.5 4572 0.87 836 1 2 5

219 7.83 283 3.69 899 M 0 6 1 2 8 . 0 _ _ - _ _ 1 . 0 B - - 49.6 80A 143TC

43 39.86 1417 3.91 1618 M 0 6 2 2 3 6 . _ _ - _ _ 1 . 0 B - - 80.4 80A 143TC39 43.64 1552 3.57 1618 4 5 .32 53.49 1899 2.41 1618 5 0 .29 59.61 2113 1.97 1618 5 6 .

24 72.28 2543 2.11 1618 M 0 6 3 2 6 3 . _ _ - _ _ 1 . 0 B - - 82.6 80A 143TC22 79.6 2807 1.88 1618 7 1 .19 91.56 3226 1.69 1618 8 0 .17 99.54 3490 1.59 1618 1 0 014 119.5 4181 1.33 1618 1 1 212 143.39 5027 1.1 1618 1 2 511 161.57 5661 0.98 1618 1 6 09.1 187.83 6588 0.84 1618 1 8 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

1.0 HP

43

35 48.56 1717 3.61 2187 M 0 7 2 2 5 0 . _ _ - _ _ 1 . 0 B - - 95.9 80A 143TC32 53.96 1902 2.77 2205 5 6 .

29 58.95 2070 3.04 2248 M 0 7 3 2 5 6 . _ _ - _ _ 1 . 0 B - - 106.9 80A 143TC27 62.83 2207 2.9 2171 6 3 .23 74.47 2619 2.58 2115 7 1 .22 79.51 2791 2.48 2091 8 0 .17 98.66 3459 2.15 2085 1 0 015 116.34 4095 1.88 1983 1 1 213 127.39 4470 1.72 1920 1 2 511 156.12 5472 1.4 1804 1 6 010 174.01 6087 1.26 1677 1 8 08.8 195.15 6817 1.13 1480 2 0 0

7.5 229 7862 0.98 1051 M 0 7 4 2 2 2 5 _ _ - _ _ 1 . 0 B - - 126.7 80A 143TC6.6 259.68 8892 0.86 1051 2 5 0

14 119.19 4170 3.61 4496 M 0 8 3 2 1 1 2 _ _ - _ _ 1 . 0 B - - 168.6 80A 143TC13 130.92 4587 3.28 4496 1 2 511 160.45 5622 2.68 4286 1 6 010 175.21 6133 2.45 4223 1 8 08.5 201.75 7036 2.14 4339 2 0 0

7.5 228.91 7834 1.54 4252 M 0 8 4 2 2 2 5 _ _ - _ _ 1 . 0 B - - 232.5 80A 143TC6.6 258.98 8851 1.46 4017 2 5 05.7 301.21 10296 1.26 4017 2 8 05.1 337.01 11508 1.13 4017 3 0 04.8 359.19 12280 1.05 4017 3 6 04 425.69 14551 0.89 4017 4 0 03.6 480.51 16398 0.83 3775 4 5 0

11 160.29 5610 3.9 6654 M 0 9 3 1 1 6 0 _ _ - _ _ 1 . 0 B - - 281 80A 143TC

7.4 231.06 8005 2.92 5780 M 0 9 4 1 2 2 5 _ _ - _ _ 1 . 0 B - - 329.5 80A 143TC6.6 258.09 8929 2.83 5609 2 5 05.7 300.18 10383 2.44 5609 2 8 05.1 335.85 11601 2.18 5609 3 0 04.8 357.95 12376 2.04 5609 3 6 04 424.23 14657 1.73 5609 4 0 03.6 471.32 16261 1.56 5609 4 5 03.4 503.22 17357 1.46 5609 5 0 02.7 624.45 21514 1.18 5609 6 5 02.3 736.35 25339 1 5609 7 3 01.9 882.06 30237 0.84 5609 8 6 0

5.4 315.65 10851 3.6 9347 M 1 0 4 1 3 0 0 _ _ - _ _ 1 . 0 B - - 466.2 80A 143TC4.9 348.16 11977 3.26 9347 3 6 04.3 398.71 13712 2.85 9347 4 0 03.9 443.06 15214 2.57 9347 4 5 03.4 500.94 17192 2.27 9347 5 0 02.9 580.78 19918 1.96 9347 6 5 02.5 692.72 23732 1.65 9347 7 3 02.1 828.21 28278 1.38 9347 8 6 01.7 987.84 33706 1.16 9347 1 0 C1.5 1138.21 38736 1.01 9347 1 1 C1.4 1246.47 42401 0.92 9347 1 3 C

4.2 410.95 14100 3.99 14529 M 1 3 4 1 4 0 0 _ _ - _ _ 1 . 0 B - - 629.4 80A 143TC3.7 463.22 15883 3.54 14529 4 5 03.3 523.74 17947 3.13 14529 5 0 02.8 607.22 20790 2.7 14529 6 5 02.4 724.25 24768 2.27 14529 7 3 02 858.69 29190 1.93 14529 8 6 01.7 1024.19 34784 1.62 14529 1 0 C1.5 1140.7 38659 1.45 14529 1 1 C1.4 1249.19 42311 1.33 14529 1 3 C1.1 1528.11 51576 1.11 14543 1 5 C0.93 1833.73 61789 0.93 14543 1 8 C0.81 2109.78 71051 0.81 14543 2 0 C

2.2 770.01 26337 3.62 18122 M 1 4 4 1 7 3 0 _ _ - _ _ 1 . 0 B - - 885.1 80A 143TC2.1 801.52 27334 3.45 18122 8 6 01.8 929.27 31664 2.98 18122 1 0 C1.5 1108.37 37724 2.5 18122 1 1 C1.4 1213.79 41280 2.28 18122 1 3 C1.1 1502.21 50947 1.76 18144 1 5 C0.95 1802.65 61016 1.47 18144 1 8 C0.83 2074.02 70145 1.28 18144 2 0 C0.74 2304.47 77821 1.15 18144 2 4 C0.6 2844.21 95957 0.86 18144 2 7 C

0.62 2743.72 91760 1.03 18122 M 1 4 5 1 2 7 C _ _ - _ _ 1 . 0 B - - 896.1 80A 143TC0.5 3404.7 113748 0.83 18122 3 2 C

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

1.5 HP

44

457 3.75 199 2.47 325 M 0 1 2 2 3 . 6 _ _ - _ _ 1 . 5 B - - 51.8 90S 145TC338 5.07 270 2.08 332 5 . 0297 5.76 307 1.93 334 5 . 6262 6.53 349 1.78 336 6 . 3205 8.35 445 1.53 335 8 . 0190 9 479 1.44 332 9 . 0151 11.36 604 1.2 323 1 1 .133 12.88 689 1.08 299 1 2 .116 14.71 786 0.97 332 1 4 .105 16.37 869 0.9 303 1 6 .95 18.05 962 0.82 236 1 8 .

340 5.03 269 3.59 861 M 0 2 2 2 5 . 0 _ _ - _ _ 1 . 5 B - - 58.5 90S 145TC309 5.55 295 3.38 874 5 . 6272 6.3 335 3.14 892 6 . 3214 8 427 2.71 899 8 . 0188 9.09 486 2.48 882 9 . 0153 11.15 597 2.09 857 1 1 .138 12.37 662 1.92 843 1 2 .122 14.05 751 1.73 826 1 4 .107 15.97 851 1.6 807 1 6 .97 17.58 939 1.46 899 1 8 .85 20.23 1079 1.31 866 2 0 .78 21.99 1173 1.21 837 2 2 .65 26.4 1407 1.01 899 2 8 .54 31.68 1684 0.84 829 3 2 .

309 5.55 297 3.96 874 M 0 3 2 2 5 . 6 _ _ - _ _ 1 . 5 B - - 58.5 90S 145TC272 6.3 335 3.66 882 6 . 3214 8 428 3.14 886 8 . 0188 9.09 487 2.89 882 9 . 0153 11.15 597 2.52 857 1 1 .138 12.37 662 2.35 843 1 2 .122 14.05 749 2.16 826 1 4 .107 15.97 853 2.01 732 1 6 .97 17.58 940 1.85 698 1 8 .85 20.23 1080 1.69 641 2 0 .78 21.99 1175 1.57 833 2 2 .65 26.4 1410 1.31 751 2 8 .54 31.68 1678 1.1 560 3 2 .48 35.69 1888 0.98 677 3 6 .

117 14.58 780 3.14 1277 M 0 4 2 2 1 4 . _ _ - _ _ 1 . 5 B - - 78.3 90S 145TC105 16.31 872 2.91 1306 1 6 .98 17.39 929 2.78 1328 1 8 .83 20.61 1103 2.41 1391 2 0 .78 22 1174 2.28 1415 2 2 .63 27.3 1462 1.91 1496 2 8 .53 32.19 1715 1.66 1524 3 2 .49 35.25 1885 1.53 1510 3 6 .40 43.2 2292 1.29 1588 4 5 .36 48.15 2552 1.17 1576 5 0 .32 54 2867 0.83 1618 5 6 .

29 58.38 3064 0.94 1611 M 0 4 3 2 5 6 . _ _ - _ _ 1 . 5 B - - 80.5 90S 145TC27 64.29 3393 0.87 1571 6 3 .

955 1.79 97 3.75 672 M 0 5 1 2 1 . 8 _ _ - _ _ 1 . 5 B - - 49.6 90S 145TC840 2.04 111 3.51 696 2 . 0685 2.5 136 3.15 696 2 . 5617 2.77 151 2.89 696 2 . 8543 3.15 171 2.27 696 3 . 2478 3.58 194 2.07 685 3 . 6434 3.94 214 1.93 678 4 . 0378 4.53 247 1.71 676 4 . 5347 4.93 267 1.6 675 5 . 0289 5.92 321 1.37 696 6 . 0241 7.1 384 1.15 696 7 . 1214 8 433 1.03 696 8 . 0

83 20.61 1102 3.61 1293 M 0 5 2 2 2 0 . _ _ - _ _ 1 . 5 B - - 80.5 90S 145TC78 22 1176 3.38 1302 2 2 .63 27.3 1459 2.73 1409 2 8 .53 32.19 1715 1.66 1418 3 2 .49 35.25 1885 1.53 1477 3 6 .40 43.2 2292 1.29 1334 4 5 .36 48.15 2556 1.18 1499 5 0 .32 54 2867 0.83 1567 5 6 .

29 58.38 3076 1.29 1259 M 0 5 3 2 5 6 . _ _ - _ _ 1 . 5 B - - 82.7 90S 145TC27 64.29 3398 1.17 1110 6 3 .23 73.95 3892 1.02 1190 7 1 .21 80.4 4255 0.94 1010 8 0 .

350 4.89 265 3.93 899 M 0 6 1 2 5 . 0 _ _ - _ _ 1 . 5 B - - 60.7 90S 145TC282 6.07 329 3.17 899 6 . 0239 7.15 388 2.69 899 7 . 1219 7.83 424 2.46 899 8 . 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

1.5 HP

63 27.24 1459 3.8 1618 M 0 6 2 2 2 8 . _ _ - _ _ 1 . 5 B - - 91.5 90S 145TC51 33.8 1809 3.06 1618 3 2 .43 39.86 2125 2.61 1618 3 6 .39 43.64 2329 2.38 1618 4 5 .32 53.49 2848 1.61 1618 5 0 .29 59.61 3170 1.31 1618 5 6 .

24 72.28 3815 1.41 1618 M 0 6 3 2 6 3 . _ _ - _ _ 1 . 5 B - - 93.7 90S 145TC22 79.6 4210 1.25 1618 7 1 .19 91.56 4840 1.13 1618 8 0 .17 99.54 5235 1.06 1618 1 0 014 119.5 6272 0.88 1618 1 1 2

49 35.17 1875 3.93 2031 M 0 7 2 2 3 6 . _ _ - _ _ 1 . 5 B - - 107 90S 145TC41 42.21 2243 3.34 2034 4 5 .35 48.56 2575 2.41 2064 5 0 .32 53.96 2853 1.85 2120 5 6 .

29 58.95 3105 2.03 2118 M 0 7 3 2 5 6 . _ _ - _ _ 1 . 5 B - - 118 90S 145TC27 62.83 3310 1.93 2017 6 3 .23 74.47 3929 1.72 1849 7 1 .22 79.51 4187 1.65 1777 8 0 .17 98.66 5189 1.43 1757 1 0 015 116.34 6142 1.25 1452 1 1 213 127.39 6705 1.15 1262 1 2 511 156.12 8209 0.94 913 1 6 010 174.01 9130 0.84 530 1 8 0

23 74.69 3916 3.64 4496 M 0 8 3 2 7 1 . _ _ - _ _ 1 . 5 B - - 179.7 90S 145TC20 84.31 4424 3.34 4496 8 0 .17 102.2 5376 2.8 4349 1 0 014 119.19 6255 2.41 4207 1 1 213 130.92 6881 2.19 4109 1 2 511 160.45 8433 1.78 3864 1 6 010 175.21 9199 1.64 3677 1 8 08.5 201.75 10554 1.43 4023 2 0 0

7.5 228.91 11752 1.03 4252 M 0 8 4 2 2 2 5 _ _ - _ _ 1 . 5 B - - 248.1 90S 145TC6.6 258.98 13277 0.98 4017 2 5 05.7 301.21 15445 0.84 4017 2 8 0

13 128.66 6794 3.73 6654 M 0 9 3 1 1 2 5 _ _ - _ _ 1 . 5 B - - 289.9 90S 145TC12 145.2 7620 2.87 6632 1 4 011 160.29 8416 2.6 6616 1 6 0

7.4 231.06 12007 1.95 5780 M 0 9 4 1 2 2 5 _ _ - _ _ 1 . 5 B - - 345.1 90S 145TC6.6 258.09 13394 1.89 5609 2 5 05.7 300.18 15574 1.62 5609 2 8 05.1 335.85 17401 1.45 5609 3 0 04.8 357.95 18564 1.36 5609 3 6 04 424.23 21986 1.15 5609 4 0 03.6 471.32 24392 1.04 5609 4 5 03.4 503.22 26036 0.97 5609 5 0 0

7.8 220.22 11374 3.43 9347 M 1 0 4 1 2 2 5 _ _ - _ _ 1 . 5 B - - 479.5 90S 145TC7.1 242.24 12510 3.12 9347 2 5 06.2 278.36 14371 2.72 9347 2 8 05.4 315.65 16276 2.4 9347 3 0 04.9 348.16 17966 2.17 9347 3 6 04.3 398.71 20568 1.9 9347 4 0 03.9 443.06 22821 1.71 9347 4 5 03.4 500.94 25788 1.51 9347 5 0 02.9 580.78 29877 1.31 9347 6 5 02.5 692.72 35598 1.1 9347 7 3 02.1 828.21 42418 0.92 9347 8 6 0

6 286.9 14783 3.8 14529 M 1 3 4 1 2 8 0 _ _ - _ _ 1 . 5 B - - 644.9 90S 145TC5.3 325.33 16741 3.36 14529 3 0 04.8 358.84 18477 3.04 14529 3 6 04.2 410.95 21150 2.66 14529 4 0 03.7 463.22 23825 2.36 14529 4 5 03.3 523.74 26921 2.09 14529 5 0 02.8 607.22 31185 1.8 14529 6 5 02.4 724.25 37152 1.51 14529 7 3 02 858.69 43786 1.28 14529 8 6 01.7 1024.19 52177 1.08 14529 1 0 C1.5 1140.7 57989 0.97 14529 1 1 C1.4 1249.19 63466 0.89 14529 1 3 C

3.5 492.49 25347 3.76 18122 M 1 4 4 1 4 5 0 _ _ - _ _ 1 . 5 B - - 900.6 90S 145TC3.1 556.83 28636 3.33 18122 5 0 02.7 645.58 33167 2.87 18122 6 5 02.2 770.01 39506 2.41 18122 7 3 02.1 801.52 41002 2.3 18122 8 6 01.8 929.27 47497 1.99 18122 1 0 C1.5 1108.37 56586 1.67 18122 1 1 C1.4 1213.79 61920 1.52 18122 1 3 C1.1 1502.21 76421 1.17 18144 1 5 C0.95 1802.65 91524 0.98 18144 1 8 C0.83 2074.02 105218 0.85 18144 2 0 C

45

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

2.0 HP

46

457 3.75 266 1.85 309 M 0 1 2 2 3 . 6 _ _ - _ _ 2 . 0 B - - 54 90L 145TC338 5.07 360 1.56 311 5 . 0297 5.76 409 1.45 310 5 . 6262 6.53 465 1.34 308 6 . 3205 8.35 594 1.15 301 8 . 0190 9 639 1.08 296 9 . 0151 11.36 805 0.9 285 1 1 .133 12.88 919 0.81 251 1 2 .

477 3.59 254 3.27 813 M 0 2 2 2 3 . 6 _ _ - _ _ 2 . 0 B - - 60.7 90L 145TC340 5.03 358 2.69 844 5 . 0309 5.55 393 2.54 856 5 . 6272 6.3 447 2.35 872 6 . 3214 8 570 2.03 882 8 . 0188 9.09 648 1.86 865 9 . 0153 11.15 796 1.57 816 1 1 .138 12.37 883 1.44 787 1 2 .122 14.05 1001 1.3 754 1 4 .107 15.97 1135 1.2 715 1 6 .97 17.58 1252 1.1 899 1 8 .85 20.23 1439 0.98 849 2 0 .78 21.99 1564 0.91 806 2 2 .

477 3.59 255 3.88 813 M 0 3 2 2 3 . 6 _ _ - _ _ 2 . 0 B - - 60.7 90L 145TC340 5.03 359 3.16 844 5 . 0309 5.55 396 2.97 856 5 . 6272 6.3 447 2.75 865 6 . 3214 8 571 2.35 874 8 . 0188 9.09 650 2.16 865 9 . 0153 11.15 796 1.89 816 1 1 .138 12.37 882 1.76 787 1 2 .122 14.05 999 1.62 754 1 4 .107 15.97 1138 1.51 665 1 6 .97 17.58 1253 1.39 618 1 8 .85 20.23 1440 1.27 538 2 0 .78 21.99 1566 1.18 806 2 2 .65 26.4 1880 0.98 692 2 8 .54 31.68 2238 0.83 424 3 2 .

137 12.54 895 2.63 1218 M 0 4 2 2 1 2 . _ _ - _ _ 2 . 0 B - - 80.5 90L 145TC117 14.58 1041 2.35 1243 1 4 .105 16.31 1162 2.18 1268 1 6 .98 17.39 1238 2.09 1279 1 8 .83 20.61 1471 1.8 1344 2 0 .78 22 1566 1.71 1365 2 2 .63 27.3 1949 1.43 1433 2 8 .53 32.19 2286 1.25 1461 3 2 .49 35.25 2513 1.15 1439 3 6 .40 43.2 3056 0.96 1569 4 5 .36 48.15 3403 0.88 1548 5 0 .

1377 1.24 90 3.57 597 M 0 5 1 2 1 . 2 _ _ - _ _ 2 . 0 B - - 51.8 90L 145TC1213 1.41 102 3.28 618 1 . 4955 1.79 130 2.81 656 1 . 8840 2.04 148 2.63 679 2 . 0685 2.5 181 2.36 684 2 . 5617 2.77 201 2.16 684 2 . 8543 3.15 228 1.7 684 3 . 2478 3.58 259 1.55 680 3 . 6434 3.94 286 1.45 672 4 . 0378 4.53 329 1.28 669 4 . 5347 4.93 356 1.2 667 5 . 0289 5.92 428 1.03 696 6 . 0241 7.1 512 0.86 696 7 . 1

117 14.58 1043 3.82 1129 M 0 5 2 2 1 4 . _ _ - _ _ 2 . 0 B - - 82.7 90L 145TC105 16.31 1165 3.42 1128 1 6 .98 17.39 1241 3.21 1131 1 8 .83 20.61 1470 2.71 1215 2 0 .78 22 1568 2.54 1212 2 2 .63 27.3 1946 2.05 1326 2 8 .53 32.19 2286 1.25 1292 3 2 .49 35.25 2513 1.15 1382 3 6 .40 43.2 3056 0.96 1144 4 5 .36 48.15 3408 0.89 1420 5 0 .

29 58.38 4102 0.97 1080 M 0 5 3 2 5 6 . _ _ - _ _ 2 . 0 B - - 84.9 90L 145TC27 64.29 4531 0.88 857 6 3 .

472 3.62 262 3.84 899 M 0 6 1 2 3 . 6 _ _ - _ _ 2 . 0 B - - 62.9 90L 145TC443 3.86 280 3.72 899 4 . 0374 4.58 333 3.14 899 4 . 5350 4.89 354 2.95 899 5 . 0282 6.07 439 2.37 899 6 . 0239 7.15 518 2.01 899 7 . 1219 7.83 566 1.84 899 8 . 0

85 20.2 1443 3.84 1618 M 0 6 2 2 1 8 . _ _ - _ _ 2 . 0 B - - 93.7 90L 145TC80 21.53 1538 3.6 1618 2 0 .67 25.51 1824 3.04 1618 2 2 .63 27.24 1946 2.85 1618 2 8 .51 33.8 2413 2.3 1615 3 2 .43 39.86 2834 1.95 1618 3 6 .39 43.64 3105 1.78 1618 4 5 .32 53.49 3798 1.21 1618 5 0 .29 59.61 4227 0.98 1618 5 6 .

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

2.0 HP

24 72.28 5087 1.06 1618 M 0 6 3 2 6 3 . _ _ - _ _ 2 . 0 B - - 95.9 90L 145TC22 79.6 5614 0.94 1618 7 1 .19 91.56 6453 0.85 1618 8 0 .

242 7.08 512 3.78 1438 M 0 7 1 2 7 . 1 _ _ - _ _ 2 . 0 B - - 78.3 90L 145TC221 7.75 559 3.46 1438 8 . 0

64 26.93 1914 3.75 1994 M 0 7 2 2 2 8 . _ _ - _ _ 2 . 0 B - - 109.2 90L 145TC53 32.12 2283 3.19 1928 3 2 .49 35.17 2500 2.95 1887 3 6 .41 42.21 2991 2.51 1892 4 5 .35 48.56 3434 1.8 1941 5 0 .32 53.96 3804 1.38 2035 5 6 .

29 58.95 4140 1.52 1987 M 0 7 3 2 5 6 . _ _ - _ _ 2 . 0 B - - 120.2 90L 145TC27 62.83 4414 1.45 1864 6 3 .23 74.47 5239 1.29 1583 7 1 .22 79.51 5582 1.24 1462 8 0 .17 98.66 6919 1.08 1430 1 0 015 116.34 8190 0.94 921 1 1 213 127.39 8940 0.86 604 1 2 5

31 55.8 3944 3.41 4495 M 0 8 2 2 5 6 . _ _ - _ _ 2 . 0 B - - 181.9 90L 145TC

28 60.33 4209 3.17 4495 M 0 8 3 2 5 6 . _ _ - _ _ 2 . 0 B - - 181.9 90L 145TC26 66.02 4646 2.97 4495 6 3 .23 74.69 5222 2.73 4384 7 1 .20 84.31 5898 2.51 4300 8 0 .17 102.2 7168 2.1 4203 1 0 014 119.19 8341 1.8 3918 1 1 213 130.92 9175 1.64 3722 1 2 511 160.45 11244 1.34 3443 1 6 010 175.21 12266 1.23 3130 1 8 08.5 201.75 14072 1.07 3708 2 0 0

18 93.92 6608 3.54 6654 M 0 9 3 1 9 0 . _ _ - _ _ 2 . 0 B - - 292.1 90L 145TC17 103.68 7299 3.2 6631 1 0 015 116.55 8210 3.08 6631 1 1 213 128.66 9058 2.79 6623 1 2 512 145.2 10160 2.15 6595 1 4 011 160.29 11221 1.95 6579 1 6 0

7.4 231.06 16010 1.46 5780 M 0 9 4 1 2 2 5 _ _ - _ _ 2 . 0 B - - 347.3 90L 145TC6.6 258.09 17859 1.42 5609 2 5 05.7 300.18 20766 1.22 5609 2 8 05.1 335.85 23202 1.09 5609 3 0 04.8 357.95 24753 1.02 5609 3 6 04 424.23 29315 0.86 5609 4 0 0

13 135.88 9497 3.88 11172 M 1 0 3 1 1 4 0 _ _ - _ _ 2 . 0 B - - 398 90L 145TC11 156.57 10941 3.37 11105 1 6 0

7.8 220.22 15165 2.58 9347 M 1 0 4 1 2 2 5 _ _ - _ _ 2 . 0 B - - 481.7 90L 145TC7.1 242.24 16680 2.34 9347 2 5 06.2 278.36 19162 2.04 9347 2 8 05.4 315.65 21702 1.8 9347 3 0 04.9 348.16 23955 1.63 9347 3 6 04.3 398.71 27424 1.42 9347 4 0 03.9 443.06 30428 1.28 9347 4 5 03.4 500.94 34384 1.14 9347 5 0 02.9 580.78 39836 0.98 9347 6 5 02.5 692.72 47464 0.82 9347 7 3 0

7.5 226.98 15602 3.6 14529 M 1 3 4 1 2 2 5 _ _ - _ _ 2 . 0 B - - 647.1 90L 145TC6.9 249.68 17160 3.27 14529 2 5 06 286.9 19711 2.85 14529 2 8 05.3 325.33 22321 2.52 14529 3 0 04.8 358.84 24636 2.28 14529 3 6 04.2 410.95 28200 1.99 14529 4 0 03.7 463.22 31767 1.77 14529 4 5 03.3 523.74 35894 1.57 14529 5 0 02.8 607.22 41580 1.35 14529 6 5 02.4 724.25 49536 1.13 14529 7 3 02 858.69 58381 0.96 14529 8 6 01.7 1024.19 69569 0.81 14529 1 0 C

4.8 353.64 24289 3.86 18122 M 1 4 4 1 3 0 0 _ _ - _ _ 2 . 0 B - - 902.8 90L 145TC4.4 390.06 26807 3.5 18122 3 6 03.8 446.71 30681 3.06 18122 4 0 03.5 492.49 33796 2.82 18122 4 5 03.1 556.83 38181 2.5 18122 5 0 02.7 645.58 44223 2.16 18122 6 5 02.2 770.01 52674 1.81 18122 7 3 02.1 801.52 54669 1.73 18122 8 6 01.8 929.27 63329 1.49 18122 1 0 C1.5 1108.37 75448 1.25 18122 1 1 C1.4 1213.79 82560 1.14 18122 1 3 C1.1 1502.21 101895 0.88 18144 1 5 C

47

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

3.0 HP

48

458 3.75 398 1.24 278 M 0 1 2 2 3 . 6 _ _ - _ _ 3 . 0 L - - 66.1 90LA 182TC339 5.07 538 1.04 269 5 . 0298 5.76 612 0.97 263 5 . 6263 6.53 696 0.9 254 6 . 3

479 3.59 381 2.19 791 M 0 2 2 2 3 . 6 _ _ - _ _ 3 . 0 L - - 72.8 90LA 182TC341 5.03 536 1.8 811 5 . 0310 5.55 588 1.7 820 5 . 6273 6.3 668 1.58 831 6 . 3215 8 852 1.36 849 8 . 0189 9.09 969 1.24 831 9 . 0154 11.15 1189 1.05 733 1 1 .139 12.37 1320 0.97 674 1 2 .122 14.05 1497 0.87 609 1 4 .108 15.97 1697 0.8 531 1 6 .

479 3.59 382 2.59 791 M 0 3 2 2 3 . 6 _ _ - _ _ 3 . 0 L - - 72.8 90LA 182TC341 5.03 536 2.11 811 5 . 0310 5.55 592 1.99 820 5 . 6273 6.3 669 1.84 831 6 . 3215 8 853 1.58 849 8 . 0189 9.09 971 1.45 831 9 . 0154 11.15 1190 1.26 733 1 1 .139 12.37 1319 1.18 674 1 2 .122 14.05 1494 1.08 609 1 4 .108 15.97 1701 1.01 531 1 6 .98 17.58 1874 0.93 456 1 8 .85 20.23 2152 0.85 331 2 0 .

342 5.04 535 3.68 1034 M 0 4 2 2 5 . 0 _ _ - _ _ 3 . 0 B - - 108 100L 182TC305 5.65 599 3.45 1050 5 . 6272 6.34 674 3.23 1068 6 . 3214 8.05 855 2.8 1105 8 . 0189 9.13 970 2.6 1121 9 . 0158 10.89 1157 2.31 1144 1 1 .138 12.54 1332 1.77 1130 1 2 .118 14.58 1549 1.58 1176 1 4 .106 16.31 1731 1.47 1193 1 6 .99 17.39 1844 1.4 1181 1 8 .84 20.61 2191 1.21 1249 2 0 .78 22 2331 1.15 1264 2 2 .63 27.3 2902 0.96 1309 2 8 .54 32.19 3404 0.84 1336 3 2 .

137 12.54 1337 1.76 1130 M 0 4 2 2 1 2 . _ _ - _ _ 3 . 0 L - - 92.6 90LA 182TC118 14.58 1556 1.58 1176 1 4 .105 16.31 1738 1.46 1193 1 6 .99 17.39 1851 1.4 1181 1 8 .83 20.61 2200 1.21 1249 2 0 .78 22 2341 1.15 1264 2 2 .63 27.3 2914 0.96 1309 2 8 .53 32.19 3418 0.83 1336 3 2 .

1382 1.24 134 2.39 575 M 0 5 1 2 1 . 2 _ _ - _ _ 3 . 0 L - - 63.9 90LA 182TC1217 1.41 153 2.19 591 1 . 4958 1.79 194 1.88 625 1 . 8843 2.04 221 1.76 645 2 . 0687 2.5 271 1.58 661 2 . 5620 2.77 301 1.45 658 2 . 8545 3.15 341 1.14 658 3 . 2480 3.58 388 1.04 672 3 . 6436 3.94 428 0.97 658 4 . 0379 4.53 492 0.86 654 4 . 5349 4.93 533 0.8 652 5 . 0

158 10.89 1160 3.43 1105 M 0 5 2 2 1 1 . _ _ - _ _ 3 . 0 B - - 108 100L 182TC138 12.54 1334 2.82 1053 1 2 .118 14.58 1553 2.56 1009 1 4 .106 16.31 1734 2.3 981 1 6 .99 17.39 1848 2.15 965 1 8 .84 20.61 2188 1.82 1060 2 0 .78 22 2335 1.71 1033 2 2 .63 27.3 2897 1.37 1160 2 8 .54 32.19 3404 0.84 1040 3 2 .

137 12.54 1340 2.81 1053 M 0 5 2 2 1 2 . _ _ - _ _ 3 . 0 L - - 94.8 90LA 182TC118 14.58 1559 2.55 1009 1 4 .105 16.31 1742 2.29 981 1 6 .99 17.39 1856 2.15 965 1 8 .83 20.61 2197 1.81 1060 2 0 .78 22 2345 1.7 1033 2 2 .63 27.3 2908 1.37 1160 2 8 .53 32.19 3418 0.83 1040 3 2 .

713 2.42 261 3.72 899 M 0 6 1 2 2 . 5 _ _ - _ _ 3 . 0 B - - 88.2 100L 182TC619 2.79 302 2.82 899 2 . 8532 3.24 351 2.75 899 3 . 2476 3.62 390 2.58 899 3 . 6446 3.86 418 2.5 899 4 . 0377 4.58 495 2.11 899 4 . 5353 4.89 527 1.98 899 5 . 0284 6.07 654 1.6 899 6 . 0241 7.15 772 1.35 899 7 . 1220 7.83 843 1.24 899 8 . 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

3.0 HP

49

530 3.24 352 2.73 899 M 0 6 1 2 3 . 2 _ _ - _ _ 3 . 0 L - - 75 90LA 182TC474 3.62 392 2.57 899 3 . 6445 3.86 419 2.49 899 4 . 0375 4.58 497 2.1 899 4 . 5351 4.89 530 1.97 899 5 . 0283 6.07 657 1.59 899 6 . 0240 7.15 775 1.35 899 7 . 1219 7.83 846 1.23 899 8 . 0

128 13.48 1435 3.72 1618 M 0 6 2 2 1 2 . _ _ - _ _ 3 . 0 B - - 119 100L 182TC111 15.52 1654 2.82 1618 1 4 .96 18.05 1921 2.75 1618 1 6 .85 20.2 2149 2.58 1598 1 8 .80 21.53 2290 2.42 1579 2 0 .68 25.51 2715 2.04 1521 2 2 .63 27.24 2897 1.91 1618 2 8 .51 33.8 3592 1.54 1610 3 2 .43 39.86 4219 1.31 1618 3 6 .40 43.64 4622 1.2 1618 4 5 .32 53.49 5654 0.81 1618 5 0 .

111 15.52 1661 2.81 1618 M 0 6 2 2 1 4 . _ _ - _ _ 3 . 0 L - - 105.8 90LA 182TC95 18.05 1929 2.73 1618 1 6 .85 20.2 2158 2.57 1598 1 8 .80 21.53 2299 2.41 1579 2 0 .67 25.51 2726 2.03 1521 2 2 .63 27.24 2909 1.9 1618 2 8 .51 33.8 3607 1.54 1610 3 2 .43 39.86 4236 1.31 1618 3 6 .39 43.64 4641 1.19 1618 4 5 .32 53.49 5677 0.81 1618 5 0 .

381 4.53 488 3.97 1438 M 0 7 1 2 4 . 5 _ _ - _ _ 3 . 0 B - - 105.8 100L 182TC337 5.12 551 3.51 1438 5 . 0291 5.93 639 3.03 1438 6 . 0244 7.08 762 2.54 1438 7 . 1223 7.75 833 2.33 1438 8 . 0

380 4.53 490 3.95 1438 M 0 7 1 2 4 . 5 _ _ - _ _ 3 . 0 L - - 90.4 90LA 182TC336 5.12 554 3.5 1438 5 . 0290 5.93 642 3.02 1438 6 . 0243 7.08 765 2.53 1438 7 . 1222 7.75 836 2.32 1438 8 . 0

106 16.26 1725 3.93 1885 M 0 7 2 2 1 6 . _ _ - _ _ 3 . 0 B - - 136.7 100L 182TC96 17.94 1905 3.59 1893 1 8 .84 20.54 2179 3.21 1814 2 0 .74 23.23 2461 2.87 1871 2 2 .64 26.93 2849 2.52 1792 2 8 .54 32.12 3398 2.15 1672 3 2 .49 35.17 3722 1.98 1598 3 6 .41 42.21 4453 1.68 1607 4 5 .36 48.56 5113 1.21 1696 5 0 .32 53.96 5664 0.93 1864 5 6 .

106 16.26 1732 3.92 1885 M 0 7 2 2 1 6 . _ _ - _ _ 3 . 0 L - - 121.3 90LA 182TC96 17.94 1912 3.57 1893 1 8 .84 20.54 2188 3.19 1814 2 0 .74 23.23 2471 2.86 1871 2 2 .64 26.93 2861 2.51 1792 2 8 .53 32.12 3412 2.14 1672 3 2 .49 35.17 3737 1.97 1598 3 6 .41 42.21 4471 1.68 1607 4 5 .35 48.56 5133 1.21 1696 5 0 .32 53.96 5687 0.93 1864 5 6 .

29 58.95 6189 1.02 1727 M 0 7 3 2 5 6 . _ _ - _ _ 3 . 0 L - - 132.3 90LA 182TC27 62.83 6598 0.97 1556 6 3 .23 74.47 7832 0.86 1051 7 1 .22 79.51 8344 0.83 834 8 0 .

242 7.14 770 3.58 1798 M 0 8 1 2 7 . 1 _ _ - _ _ 3 . 0 B - - 136.7 100L 182TC220 7.85 844 3.33 1798 8 . 0

48 36.21 3839 3.69 4523 M 0 8 2 2 3 6 . _ _ - _ _ 3 . 0 B - - 207.2 100L 182TC39 44.38 4706 3.08 4532 4 5 .36 48.46 5130 2.85 4536 5 0 .31 55.8 5871 2.29 4190 5 6 .

29 60.33 6266 2.13 4154 M 0 8 3 2 5 6 . _ _ - _ _ 3 . 0 B - - 209.4 100L 182TC26 66.02 6917 2 4098 6 3 .23 74.69 7774 1.83 4159 7 1 .20 84.31 8781 1.68 3906 8 0 .17 102.2 10671 1.41 3910 1 0 014 119.19 12417 1.21 3340 1 1 213 130.92 13659 1.1 2947 1 2 511 160.45 16739 0.9 2600 1 6 010 175.21 18260 0.82 2037 1 8 0

28 60.33 6292 2.12 4154 M 0 8 3 2 5 6 . _ _ - _ _ 3 . 0 L - - 194 90LA 182TC26 66.02 6945 1.99 4098 6 3 .23 74.69 7805 1.83 4159 7 1 .20 84.31 8817 1.68 3906 8 0 .17 102.2 10714 1.4 3910 1 0 014 119.19 12467 1.21 3340 1 1 213 130.92 13714 1.1 2947 1 2 511 160.45 16807 0.9 2600 1 6 010 175.21 18335 0.82 2037 1 8 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

3.0 HP

31 55.18 5833 3.08 6656 M 0 9 2 1 5 6 . _ _ - _ _ 3 . 0 B - - 297.6 100L 182TC28 61.13 6468 3.38 6657 6 3 .25 68.74 7253 3.01 6635 7 1 .

29 59.85 6275 3.44 6658 M 0 9 3 1 5 6 . _ _ - _ _ 3 . 0 B - - 317.5 100L 182TC26 66.49 6972 3.2 6635 6 3 .23 74.26 7778 3.11 6635 7 1 .21 82.51 8648 2.89 6636 8 0 .18 93.92 9838 2.37 6602 9 0 .17 103.68 10866 2.15 6580 1 0 015 116.55 12223 2.07 6573 1 1 213 128.66 13485 1.88 6561 1 2 512 145.2 15126 1.45 6522 1 4 011 160.29 16705 1.31 6504 1 6 0

7.4 231.06 23931 0.98 5780 M 0 9 4 1 2 2 5 _ _ - _ _ 3 . 0 L - - 359.4 90LA 182TC6.7 258.09 26696 0.95 5609 2 5 05.7 300.18 31040 0.81 5609 2 8 0

18 95.44 9990 3.34 11119 M 1 0 3 1 9 0 . _ _ - _ _ 3 . 0 B - - 425.5 100L 182TC16 109.97 11508 2.9 11054 1 0 015 112.77 11795 3.31 11054 1 1 213 129.94 13586 2.87 10989 1 2 513 135.88 14139 2.6 10980 1 4 011 156.57 16288 2.26 10884 1 6 0

7.8 220.22 22577 1.73 9347 M 1 0 4 1 2 2 5 _ _ - _ _ 3 . 0 B - - 507 100L 182TC7.1 242.24 24832 1.57 9347 2 5 06.2 278.36 28527 1.37 9347 2 8 05.5 315.65 32308 1.21 9347 3 0 05 348.16 35662 1.1 9347 3 6 04.3 398.71 40826 0.96 9347 4 0 03.9 443.06 45298 0.86 9347 4 5 0

7.8 220.22 22669 1.72 9347 M 1 0 4 1 2 2 5 _ _ - _ _ 3 . 0 L - - 493.8 90LA 182TC7.1 242.24 24933 1.57 9347 2 5 06.2 278.36 28643 1.36 9347 2 8 05.4 315.65 32440 1.2 9347 3 0 04.9 348.16 35807 1.09 9347 3 6 04.3 398.71 40992 0.95 9347 4 0 03.9 443.06 45482 0.86 9347 4 5 0

12 139.07 14386 3.97 15043 M 1 3 3 1 1 4 0 _ _ - _ _ 3 . 0 B - - 579.8 100L 182TC11 154.89 16000 3.57 15021 1 6 010 173.37 18015 3.12 14999 1 8 09.4 184.46 19180 2.93 14977 2 0 08.1 212.09 21993 2.6 14978 2 2 5

7.6 226.98 23227 2.42 14529 M 1 3 4 1 2 2 5 _ _ - _ _ 3 . 0 B - - 672.4 100L 182TC6.9 249.68 25546 2.2 14529 2 5 06 286.9 29344 1.92 14529 2 8 05.3 325.33 33229 1.69 14529 3 0 04.8 358.84 36676 1.53 14529 3 6 04.2 410.95 41982 1.34 14529 4 0 03.7 463.22 47292 1.19 14529 4 5 03.3 523.74 53436 1.05 14529 5 0 02.8 607.22 61900 0.91 14529 6 5 0

7.6 226.98 23322 2.41 14529 M 1 3 4 1 2 2 5 _ _ - _ _ 3 . 0 L - - 659.2 90LA 182TC6.9 249.68 25650 2.19 14529 2 5 06 286.9 29463 1.91 14529 2 8 05.3 325.33 33365 1.68 14529 3 0 04.8 358.84 36826 1.53 14529 3 6 04.2 410.95 42153 1.33 14529 4 0 03.7 463.22 47485 1.18 14529 4 5 03.3 523.74 53654 1.05 14529 5 0 02.8 607.22 62153 0.9 14529 6 5 0

7 246.73 25283 3.71 18122 M 1 4 4 1 2 2 5 _ _ - _ _ 3 . 0 B - - 928.1 100L 182TC6.4 271.4 27805 3.37 18122 2 5 05.5 311.86 31935 2.94 18122 2 8 04.9 353.64 36160 2.59 18122 3 0 04.4 390.06 39907 2.35 18122 3 6 03.9 446.71 45675 2.05 18122 4 0 03.5 492.49 50312 1.89 18122 4 5 03.1 556.83 56841 1.68 18122 5 0 02.7 645.58 65834 1.45 18122 6 5 02.2 770.01 78416 1.22 18122 7 3 02.2 801.52 81386 1.16 18122 8 6 01.9 929.27 94278 1 18122 1 0 C1.6 1108.37 112319 0.84 18122 1 1 C

7 246.73 25386 3.69 18122 M 1 4 4 1 2 2 5 _ _ - _ _ 3 . 0 L - - 914.9 90LA 182TC6.3 271.4 27918 3.36 18122 2 5 05.5 311.86 32065 2.92 18122 2 8 04.9 353.64 36307 2.58 18122 3 0 04.4 390.06 40070 2.34 18122 3 6 03.8 446.71 45861 2.04 18122 4 0 03.5 492.49 50517 1.89 18122 4 5 03.1 556.83 57072 1.67 18122 5 0 02.7 645.58 66102 1.44 18122 6 5 02.2 770.01 78736 1.21 18122 7 3 02.1 801.52 81718 1.15 18122 8 6 01.8 929.27 94663 1 18122 1 0 C1.6 1108.37 112776 0.84 18122 1 1 C

50

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

4.0 HP

51

481 3.58 504 3.34 981 M 0 4 2 2 3 . 6 _ M _ - _ _ 4 . 0 B - - 108 100L342 5.04 714 2.76 1010 5 . 0305 5.65 799 2.59 1024 5 . 6272 6.34 899 2.42 1039 6 . 3214 8.05 1141 2.1 1067 8 . 0189 9.13 1294 1.95 1079 9 . 0158 10.89 1544 1.73 1093 1 1 .138 12.54 1777 1.32 1042 1 2 .118 14.58 2067 1.19 1109 1 4 .106 16.31 2309 1.1 1117 1 6 .99 17.39 2460 1.05 1084 1 8 .84 20.61 2923 0.91 1155 2 0 .78 22 3111 0.86 1164 2 2 .

214 8.05 1148 3.47 1028 M 0 5 2 2 8 . 0 _ M _ - _ _ 4 . 0 B - - 108 100L189 9.13 1298 3.07 1040 9 . 0158 10.89 1548 2.57 1046 1 1 .138 12.54 1780 2.12 969 1 2 .118 14.58 2072 1.92 889 1 4 .106 16.31 2314 1.72 834 1 6 .99 17.39 2466 1.62 798 1 8 .84 20.61 2919 1.36 904 2 0 .78 22 3116 1.28 854 2 2 .63 27.3 3865 1.03 995 2 8 .

963 1.79 258 3.6 899 M 0 6 1 2 1 . 8 _ M _ - _ _ 4 . 0 B - - 88.2 100L850 2.03 294 3.25 899 2 . 0713 2.42 348 2.79 899 2 . 5619 2.79 403 2.12 899 2 . 8532 3.24 468 2.06 899 3 . 2476 3.62 521 1.94 899 3 . 6446 3.86 557 1.87 899 4 . 0377 4.58 661 1.58 899 4 . 5353 4.89 704 1.48 899 5 . 0284 6.07 873 1.2 899 6 . 0241 7.15 1030 1.01 899 7 . 1220 7.83 1125 0.93 899 8 . 0

173 9.97 1419 3.67 1618 M 0 6 2 2 9 . 0 _ M _ - _ _ 4 . 0 B - - 119 100L153 11.3 1606 3.27 1618 1 1 .128 13.48 1914 2.79 1618 1 2 .111 15.52 2207 2.12 1618 1 4 .96 18.05 2563 2.06 1618 1 6 .85 20.2 2867 1.93 1577 1 8 .80 21.53 3055 1.81 1540 2 0 .68 25.51 3623 1.53 1424 2 2 .63 27.24 3865 1.43 1618 2 8 .51 33.8 4793 1.16 1604 3 2 .43 39.86 5629 0.98 1618 3 6 .40 43.64 6167 0.9 1618 4 5 .

481 3.58 514 3.77 1438 M 0 7 1 2 3 . 6 _ M _ - _ _ 4 . 0 B - - 105.8 100L436 3.95 569 3.4 1438 4 . 0381 4.53 652 2.97 1426 4 . 5337 5.12 736 2.63 1431 5 . 0291 5.93 853 2.27 1438 6 . 0244 7.08 1017 1.91 1438 7 . 1222 7.75 1111 1.74 1438 8 . 0

152 11.35 1610 3.83 1742 M 0 7 2 2 1 1 . _ M _ - _ _ 4 . 0 B - - 136.7 100L138 12.48 1767 3.6 1727 1 2 .120 14.34 2033 3.22 1700 1 4 .106 16.26 2301 2.95 1728 1 6 .96 17.94 2541 2.69 1735 1 8 .84 20.54 2908 2.4 1621 2 0 .74 23.23 3284 2.15 1703 2 2 .64 26.93 3801 1.89 1589 2 8 .54 32.12 4534 1.61 1416 3 2 .49 35.17 4965 1.48 1310 3 6 .41 42.21 5941 1.26 1323 4 5 .36 48.56 6821 0.91 1451 5 0 .

385 4.48 644 4 1798 M 0 8 1 2 4 . 5 _ M _ - _ _ 4 . 0 B - - 136.7 100L341 5.05 725 3.63 1798 5 . 0281 6.12 882 3.06 1798 6 . 0241 7.14 1028 2.69 1798 7 . 1220 7.85 1127 2.5 1798 8 . 0

61 28.27 4019 3.37 4382 M 0 8 2 2 2 8 . _ M _ - _ _ 4 . 0 B - - 207.2 100L52 32.97 4650 2.97 4494 3 2 .48 36.21 5122 2.76 4243 3 6 .39 44.38 6278 2.31 4165 4 5 .36 48.46 6844 2.13 4124 5 0 .31 55.8 7833 1.72 3886 5 6 .

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

4.0 HP

52

29 60.33 8360 1.6 3813 M 0 8 3 2 5 6 . _ M _ - _ _ 4 . 0 B - - 209.4 100L26 66.02 9228 1.5 3701 6 3 .23 74.69 10371 1.37 3934 7 1 .20 84.31 11715 1.26 3512 8 0 .17 102.2 14236 1.06 3618 1 0 014 119.19 16566 0.91 2762 1 1 213 130.92 18222 0.83 2173 1 2 5

43 40.25 5706 3.83 6654 M 0 9 2 1 4 0 . _ M _ - _ _ 4 . 0 B - - 297.6 100L39 44.44 6303 3.47 6654 4 5 .35 49.07 6928 2.9 6654 5 0 .31 55.18 7782 2.31 6630 5 6 .28 61.13 8629 2.53 6624 6 3 .25 68.74 9677 2.26 6599 7 1 .

29 59.85 8372 2.58 6620 M 0 9 3 1 5 6 . _ M _ - _ _ 4 . 0 B - - 317.5 100L26 66.49 9301 2.4 6598 6 3 .23 74.26 10377 2.33 6598 7 1 .21 82.51 11537 2.16 6589 8 0 .18 93.92 13125 1.78 6551 9 0 .17 103.68 14497 1.61 6529 1 0 015 116.55 16306 1.55 6516 1 1 213 128.66 17991 1.41 6499 1 2 512 145.2 20180 1.08 6449 1 4 011 160.29 22286 0.98 6429 1 6 0

26 66.93 9354 3.57 10723 M 1 0 3 1 6 3 . _ M _ - _ _ 4 . 0 B - - 425.5 100L24 71.17 9943 3.77 10947 7 1 .22 79.08 11047 3.5 11082 8 0 .18 95.44 13328 2.5 10976 9 0 .16 109.97 15353 2.17 10891 1 0 015 112.77 15736 2.48 10891 1 1 213 129.94 18125 2.15 10800 1 2 513 135.88 18863 1.95 10787 1 4 011 156.57 21731 1.69 10663 1 6 0

7.8 220.22 30120 1.3 9347 M 1 0 4 1 2 2 5 _ M _ - _ _ 4 . 0 B - - 507 100L7.1 242.24 33129 1.18 9347 2 5 06.2 278.36 38058 1.03 9347 2 8 05.5 315.65 43102 0.91 9347 3 0 05 348.16 47577 0.82 9347 3 6 0

17 101.07 14080 3.9 15039 M 1 3 3 1 1 0 0 _ M _ - _ _ 4 . 0 B - - 579.8 100L15 113.69 15756 3.57 15017 1 1 214 126.62 17525 3.21 14994 1 2 512 139.07 19192 2.98 15004 1 4 011 154.89 21346 2.68 14979 1 6 010 173.37 24035 2.34 14950 1 8 09.3 184.46 25589 2.2 14927 2 0 08.1 212.09 29341 1.95 14918 2 2 5

7.6 226.98 30988 1.81 14529 M 1 3 4 1 2 2 5 _ M _ - _ _ 4 . 0 B - - 672.4 100L6.9 249.68 34081 1.65 14529 2 5 06 286.9 39148 1.44 14529 2 8 05.3 325.33 44332 1.27 14529 3 0 04.8 358.84 48930 1.15 14529 3 6 04.2 410.95 56008 1 14529 4 0 03.7 463.22 63093 0.89 14529 4 5 0

9.3 185.56 25633 3.8 20974 M 1 4 3 1 1 8 0 _ M _ - _ _ 4 . 0 B - - 864.2 100L8.3 208.15 28899 3.37 20952 2 0 08.1 211.96 29260 3.06 20961 2 2 5

7 246.73 33731 2.78 18122 M 1 4 4 1 2 2 5 _ M _ - _ _ 4 . 0 B - - 928.1 100L6.4 271.4 37095 2.53 18122 2 5 05.5 311.86 42605 2.2 18122 2 8 04.9 353.64 48241 1.94 18122 3 0 04.4 390.06 53241 1.76 18122 3 6 03.9 446.71 60935 1.54 18122 4 0 03.5 492.49 67122 1.42 18122 4 5 03.1 556.83 75832 1.26 18122 5 0 02.7 645.58 87830 1.09 18122 6 5 02.2 770.01 104616 0.91 18122 7 3 02.2 801.52 108578 0.87 18122 8 6 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

5.5 HP

53

344 5.04 976 2.02 975 M 0 4 2 2 5 . 0 _ _ - _ _ 5 . 5 B - - 123.4 112M 184TC307 5.65 1092 1.9 984 5 . 6274 6.34 1228 1.77 995 6 . 3216 8.05 1559 1.54 1011 8 . 0190 9.13 1767 1.43 1016 9 . 0159 10.89 2108 1.27 1017 1 1 .138 12.54 2427 0.97 910 1 2 .119 14.58 2823 0.87 1009 1 4 .106 16.31 3153 0.81 1004 1 6 .

484 3.58 693 3.72 921 M 0 5 2 2 3 . 6 _ _ - _ _ 5 . 5 B - - 123.4 112M 184TC344 5.04 977 3.46 939 5 . 0307 5.65 1100 3.31 949 5 . 6274 6.34 1228 2.98 959 6 . 3216 8.05 1568 2.54 975 8 . 0190 9.13 1772 2.25 979 9 . 0159 10.89 2113 1.88 958 1 1 .138 12.54 2431 1.55 842 1 2 .119 14.58 2829 1.41 709 1 4 .106 16.31 3160 1.26 613 1 6 .100 17.39 3367 1.18 549 1 8 .84 20.61 3987 1 671 2 0 .79 22 4254 0.94 586 2 2 .

1383 1.26 248 3.31 899 M 0 6 1 2 1 . 2 _ _ - _ _ 5 . 5 B - - 103.6 112M 184TC1232 1.41 277 2.98 899 1 . 4970 1.79 352 2.64 899 1 . 8856 2.03 402 2.38 899 2 . 0718 2.42 476 2.04 899 2 . 5623 2.79 550 1.55 899 2 . 8536 3.24 640 1.51 899 3 . 2479 3.62 711 1.42 899 3 . 6449 3.86 761 1.37 899 4 . 0379 4.58 903 1.16 899 4 . 5355 4.89 961 1.09 899 5 . 0286 6.07 1192 0.88 899 6 . 0

391 4.44 860 3.72 1618 M 0 6 2 2 5 . 0 _ _ - _ _ 5 . 5 B - - 134.4 112M 184TC278 6.24 1210 3.46 1618 5 . 6248 6.99 1362 3.31 1618 6 . 3221 7.85 1520 2.98 1618 8 . 0174 9.97 1938 2.68 1618 9 . 0154 11.3 2193 2.4 1618 1 1 .129 13.48 2614 2.04 1618 1 2 .112 15.52 3014 1.55 1618 1 4 .96 18.05 3500 1.51 1618 1 6 .86 20.2 3915 1.41 1547 1 8 .81 21.53 4172 1.33 1481 2 0 .68 25.51 4947 1.12 1279 2 2 .64 27.24 5278 1.05 1618 2 8 .51 33.8 6544 0.85 1596 3 2 .

1377 1.26 247 3.82 1310 M 0 7 1 2 1 . 2 _ _ - _ _ 5 . 5 B - - 121.2 112M 184TC1252 1.39 273 3.82 1346 1 . 4959 1.81 356 3.82 1438 1 . 8843 2.06 405 3.82 1438 2 . 0694 2.5 494 3.31 1438 2 . 5631 2.75 543 3.14 1438 2 . 8549 3.16 621 2.98 1427 3 . 2484 3.58 702 2.76 1433 3 . 6439 3.95 778 2.49 1422 4 . 0384 4.53 890 2.18 1408 4 . 5339 5.12 1005 1.93 1419 5 . 0293 5.93 1164 1.66 1438 6 . 0245 7.08 1388 1.4 1438 7 . 1224 7.75 1517 1.28 1438 8 . 0

472 3.68 706 3.82 1645 M 0 7 2 2 3 . 6 _ _ - _ _ 5 . 5 B - - 152.1 112M 184TC341 5.09 981 3.82 1708 5 . 0303 5.72 1104 3.82 1728 5 . 6276 6.29 1215 3.82 1753 6 . 3211 8.22 1596 3.41 1827 8 . 0186 9.34 1807 3.17 1861 9 . 0153 11.35 2198 2.81 1583 1 1 .139 12.48 2413 2.64 1544 1 2 .121 14.34 2777 2.36 1476 1 4 .107 16.26 3142 2.16 1492 1 6 .97 17.94 3470 1.97 1498 1 8 .85 20.54 3970 1.76 1331 2 0 .75 23.23 4484 1.58 1451 2 2 .64 26.93 5190 1.38 1285 2 8 .54 32.12 6191 1.18 1032 3 2 .49 35.17 6780 1.09 877 3 6 .41 42.21 8113 0.92 896 4 5 .

533 3.26 643 3.72 1798 M 0 8 1 2 3 . 2 _ _ - _ _ 5 . 5 B - - 152.1 112M 184TC480 3.62 713 3.46 1798 3 . 6439 3.96 778 3.19 1798 4 . 0388 4.48 880 2.93 1796 4 . 5344 5.05 991 2.66 1793 5 . 0283 6.12 1205 2.24 1798 6 . 0243 7.14 1404 1.97 1798 7 . 1221 7.85 1539 1.83 1798 8 . 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

5.5 HP

54

104 16.69 3222 3.85 3798 M 0 8 2 2 1 6 . _ _ - _ _ 5 . 5 B - - 222.6 112M 184TC95 18.26 3529 3.41 3843 1 8 .84 20.66 3986 3.24 3933 2 0 .74 23.32 4506 2.93 4046 2 2 .61 28.27 5488 2.47 3944 2 8 .53 32.97 6349 2.17 3961 3 2 .48 36.21 6995 2.02 3823 3 6 .39 44.38 8573 1.69 3614 4 5 .36 48.46 9346 1.56 3505 5 0 .31 55.8 10696 1.26 3428 5 6 .

29 60.33 11416 1.17 3302 M 0 8 3 2 5 6 . _ _ - _ _ 5 . 5 B - - 224.8 112M 184TC26 66.02 12601 1.1 3105 6 3 .23 74.69 14162 1.01 3596 7 1 .21 84.31 15997 0.92 2921 8 0 .

54 32.31 6281 3.07 6226 M 0 9 2 1 3 2 . _ _ - _ _ 5 . 5 B - - 313 112M 184TC49 35.67 6880 2.83 6406 3 6 .43 40.25 7791 2.81 6569 4 0 .39 44.44 8608 2.54 6552 4 5 .35 49.07 9460 2.12 6519 5 0 .31 55.18 10627 1.69 6591 5 6 .28 61.13 11784 1.86 6576 6 3 .25 68.74 13214 1.65 6545 7 1 .

29 59.85 11432 1.89 6564 M 0 9 3 1 5 6 . _ _ - _ _ 5 . 5 B - - 332.9 112M 184TC26 66.49 12701 1.76 6541 6 3 .23 74.26 14169 1.71 6541 7 1 .21 82.51 15754 1.58 6519 8 0 .18 93.92 17922 1.3 6474 9 0 .17 103.68 19796 1.18 6451 1 0 015 116.55 22267 1.14 6429 1 1 213 128.66 24566 1.03 6406 1 2 5

36 47.93 9229 3.8 9554 M 1 0 2 1 5 0 . _ _ - _ _ 5 . 5 B - - 414.4 112M 184TC34 51.49 9903 3.46 9779 5 6 .30 57.75 11111 3.31 10127 6 3 .28 62.05 11892 3.1 10363 7 1 .

29 60.23 11496 2.9 10251 M 1 0 3 1 5 6 . _ _ - _ _ 5 . 5 B - - 451.9 112M 184TC26 66.93 12773 2.61 10574 6 3 .24 71.17 13577 2.76 10790 7 1 .22 79.08 15085 2.56 10911 8 0 .18 95.44 18199 1.83 10761 9 0 .16 109.97 20965 1.59 10647 1 0 015 112.77 21487 1.82 10647 1 1 213 129.94 24750 1.58 10517 1 2 513 135.88 25757 1.43 10498 1 4 011 156.57 29673 1.24 10333 1 6 0

7.9 220.22 41128 0.95 9347 M 1 0 4 1 2 2 5 _ _ - _ _ 5 . 5 B - - 522.4 112M 184TC7.2 242.24 45237 0.86 9347 2 5 0

22 80.39 15287 3.68 15039 M 1 3 3 1 8 0 . _ _ - _ _ 5 . 5 B - - 595.2 112M 184TC19 90.75 17187 3.19 14994 9 0 .17 101.07 19226 2.85 14997 1 0 015 113.69 21515 2.61 14969 1 1 214 126.62 23930 2.35 14944 1 2 512 139.07 26207 2.18 14945 1 4 011 154.89 29147 1.96 14915 1 6 010 173.37 32819 1.71 14877 1 8 09.4 184.46 34941 1.61 14852 2 0 08.2 212.09 40065 1.43 14828 2 2 5

7.6 226.98 42314 1.33 14529 M 1 3 4 1 2 2 5 _ _ - _ _ 5 . 5 B - - 687.8 112M 184TC7 249.68 46538 1.21 14529 2 5 06.1 286.9 53456 1.05 14529 2 8 05.3 325.33 60535 0.93 14529 3 0 04.8 358.84 66814 0.84 14529 3 6 0

13 135.31 25638 3.8 20974 M 1 4 3 1 1 2 5 _ _ - _ _ 5 . 5 B - - 879.6 112M 184TC12 142.66 26781 3.34 20974 1 4 011 154.57 29101 3.07 20971 1 6 09.4 185.56 35001 2.78 20912 1 8 08.3 208.15 39462 2.47 20887 2 0 08.2 211.96 39955 2.24 20903 2 2 5

7 246.73 46059 2.04 18122 M 1 4 4 1 2 2 5 _ _ - _ _ 5 . 5 B - - 943.5 112M 184TC6.4 271.4 50653 1.85 18122 2 5 05.6 311.86 58177 1.61 18122 2 8 04.9 353.64 65873 1.42 18122 3 0 04.5 390.06 72700 1.29 18122 3 6 03.9 446.71 83207 1.13 18122 4 0 03.5 492.49 91655 1.04 18122 4 5 03.1 556.83 103548 0.92 18122 5 0 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

7.5 HP

55

483 3.58 940 1.79 923 M 0 4 2 2 3 . 6 _ _ - _ _ 7 . 5 L - - 154.3 112MA 213TC344 5.04 1334 1.48 928 5 . 0307 5.65 1492 1.39 932 5 . 6273 6.34 1678 1.3 937 6 . 3215 8.05 2131 1.13 937 8 . 0190 9.13 2415 1.04 932 9 . 0159 10.89 2882 0.93 914 1 1 .

483 3.58 948 2.73 890 M 0 5 2 2 3 . 6 _ _ - _ _ 7 . 5 L - - 154.3 112MA 213TC344 5.04 1336 2.53 894 5 . 0307 5.65 1504 2.42 899 5 . 6273 6.34 1679 2.18 903 6 . 3215 8.05 2143 1.86 903 8 . 0190 9.13 2422 1.64 899 9 . 0159 10.89 2889 1.38 840 1 1 .138 12.54 3323 1.13 674 1 2 .119 14.58 3867 1.03 469 1 4 .106 16.31 4319 0.92 318 1 6 .100 17.39 4602 0.87 216 1 8 .

1380 1.26 340 2.42 899 M 0 6 1 2 1 . 2 _ _ - _ _ 7 . 5 L - - 134.5 112MA 213TC1229 1.41 379 2.18 899 1 . 4968 1.79 481 1.93 899 1 . 8854 2.03 549 1.74 899 2 . 0716 2.42 651 1.5 899 2 . 5622 2.79 752 1.13 899 2 . 8535 3.24 875 1.1 899 3 . 2478 3.62 972 1.04 899 3 . 6448 3.86 1040 1 899 4 . 0378 4.58 1234 0.85 899 4 . 5

390 4.44 1175 2.73 1618 M 0 6 2 2 5 . 0 _ _ - _ _ 7 . 5 L - - 165.3 112MA 213TC278 6.24 1654 2.53 1618 5 . 6248 6.99 1861 2.42 1618 6 . 3221 7.85 2077 2.18 1618 8 . 0174 9.97 2649 1.96 1618 9 . 0153 11.3 2997 1.75 1618 1 1 .128 13.48 3573 1.49 1618 1 2 .112 15.52 4119 1.13 1618 1 4 .96 18.05 4784 1.1 1618 1 6 .86 20.2 5351 1.04 1506 1 8 .80 21.53 5702 0.97 1402 2 0 .68 25.51 6762 0.82 1085 2 2 .

1384 1.26 336 2.82 1280 M 0 7 1 2 1 . 2 _ _ - _ _ 7 . 5 B - - 163.3 132SA 213TC1259 1.39 370 2.82 1315 1 . 4964 1.81 483 2.82 1401 1 . 8848 2.06 549 2.82 1407 2 . 0698 2.5 670 2.44 1418 2 . 5635 2.75 736 2.32 1422 2 . 8552 3.16 843 2.19 1413 3 . 2487 3.58 953 2.03 1425 3 . 6442 3.95 1055 1.84 1400 4 . 0386 4.53 1207 1.6 1384 4 . 5341 5.12 1364 1.42 1404 5 . 0294 5.93 1580 1.23 1438 6 . 0247 7.08 1884 1.03 1438 7 . 1225 7.75 2059 0.94 1438 8 . 0

1374 1.26 338 2.8 1280 M 0 7 1 2 1 . 2 _ _ - _ _ 7 . 5 L - - 152.1 112MA 213TC1249 1.39 373 2.8 1315 1 . 4956 1.81 487 2.8 1401 1 . 8841 2.06 553 2.8 1407 2 . 0693 2.5 675 2.42 1418 2 . 5630 2.75 742 2.3 1422 2 . 8548 3.16 849 2.18 1413 3 . 2483 3.58 960 2.02 1425 3 . 6438 3.95 1063 1.82 1400 4 . 0383 4.53 1217 1.59 1384 4 . 5338 5.12 1374 1.41 1404 5 . 0292 5.93 1592 1.22 1438 6 . 0245 7.08 1898 1.02 1438 7 . 1223 7.75 2074 0.93 1438 8 . 0

474 3.68 958 2.82 1621 M 0 7 2 2 3 . 6 _ _ - _ _ 7 . 5 B - - 194.2 132SA 213TC343 5.09 1332 2.82 1670 5 . 0305 5.72 1498 2.82 1668 5 . 6277 6.29 1649 2.82 1672 6 . 3212 8.22 2165 2.51 1671 8 . 0187 9.34 2451 2.34 1660 9 . 0154 11.35 2982 2.07 1371 1 1 .140 12.48 3274 1.94 1300 1 2 .122 14.34 3767 1.74 1177 1 4 .107 16.26 4263 1.59 1178 1 6 .97 17.94 4708 1.45 1183 1 8 .85 20.54 5386 1.3 945 2 0 .75 23.23 6083 1.16 1116 2 2 .65 26.93 7042 1.02 879 2 8 .54 32.12 8399 0.87 521 3 2 .50 35.17 9198 0.8 299 3 6 .

471 3.68 965 2.8 1621 M 0 7 2 2 3 . 6 _ _ - _ _ 7 . 5 L - - 183 112MA 213TC340 5.09 1342 2.8 1670 5 . 0303 5.72 1509 2.8 1668 5 . 6275 6.29 1661 2.8 1672 6 . 3211 8.22 2181 2.5 1671 8 . 0185 9.34 2470 2.32 1660 9 . 0153 11.35 3005 2.05 1371 1 1 .139 12.48 3299 1.93 1300 1 2 .121 14.34 3795 1.73 1177 1 4 .107 16.26 4295 1.58 1178 1 6 .97 17.94 4743 1.44 1183 1 8 .84 20.54 5427 1.29 945 2 0 .75 23.23 6129 1.15 1116 2 2 .64 26.93 7094 1.01 879 2 8 .54 32.12 8462 0.86 521 3 2 .

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

7.5 HP

861 2.03 540 3.82 1800 M 0 8 1 2 2 . 0 _ _ - _ _ 7 . 5 B - - 196.4 132SA 213TC702 2.48 663 3.33 1799 2 . 5623 2.8 750 3.03 1782 2 . 8535 3.26 873 2.75 1786 3 . 2483 3.62 968 2.55 1793 3 . 6441 3.96 1056 2.35 1797 4 . 0390 4.48 1193 2.16 1794 4 . 5345 5.05 1344 1.96 1787 5 . 0285 6.12 1635 1.65 1798 6 . 0244 7.14 1905 1.45 1798 7 . 1222 7.85 2088 1.35 1798 8 . 0

135 12.92 3406 3.35 3585 M 0 8 2 2 1 2 . _ _ - _ _ 7 . 5 B - - 266.9 132SA 213TC116 15.04 3948 3.05 3657 1 4 .105 16.69 4370 2.83 3483 1 6 .96 18.26 4788 2.51 3479 1 8 .84 20.66 5408 2.39 3496 2 0 .75 23.32 6112 2.16 3530 2 2 .62 28.27 7446 1.82 3359 2 8 .53 32.97 8614 1.6 3250 3 2 .48 36.21 9489 1.49 3263 3 6 .39 44.38 11630 1.25 2881 4 5 .36 48.46 12679 1.15 2680 5 0 .31 55.8 14510 0.93 2819 5 6 .

29 60.33 15487 0.86 2620 M 0 8 3 2 5 6 . _ _ - _ _ 7 . 5 B - - 278 132SA 213TC26 66.02 17095 0.81 2311 6 3 .

29 60.33 15603 0.86 2620 M 0 8 3 2 5 6 . _ _ - _ _ 7 . 5 L - - 255.7 112MA 213TC26 66.02 17223 0.8 2311 6 3 .

67 26.04 6851 3.42 5719 M 0 9 2 1 2 5 . _ _ - _ _ 7 . 5 B - - 357.3 132SA 213TC61 28.74 7560 3.1 5762 2 8 .54 32.31 8521 2.26 5987 3 2 .49 35.67 9334 2.09 6205 3 6 .43 40.25 10570 2.07 6457 4 0 .39 44.44 11677 1.87 6418 4 5 .36 49.07 12834 1.57 6339 5 0 .32 55.18 14416 1.25 6539 5 6 .29 61.13 15986 1.37 6511 6 3 .25 68.74 17926 1.22 6474 7 1 .

47 37.06 9689 3.71 8728 M 1 0 2 1 4 0 . _ _ - _ _ 7 . 5 B - - 458.7 132SA 213TC41 42.7 11176 3.26 9110 4 5 .36 47.93 12521 2.8 9414 5 0 .34 51.49 13434 2.55 9629 5 6 .30 57.75 15073 2.44 9962 6 3 .28 62.05 16133 2.28 10183 7 1 .

29 60.23 15595 2.14 10071 M 1 0 3 1 5 6 . _ _ - _ _ 7 . 5 B - - 518.3 132SA 213TC26 66.93 17328 1.93 10375 6 3 .25 71.17 18419 2.03 10580 7 1 .22 79.08 20465 1.89 10682 8 0 .18 95.44 24689 1.35 10475 9 0 .16 109.97 28442 1.17 10321 1 0 015 112.77 29150 1.34 10321 1 1 213 129.94 33576 1.16 10139 1 2 513 135.88 34942 1.05 10113 1 4 011 156.57 40255 0.91 9891 1 6 0

31 56.93 14744 3.58 15041 M 1 3 3 1 5 6 . _ _ - _ _ 7 . 5 B - - 639.5 132SA 213TC27 64.17 16584 3.19 14996 6 3 .24 71.32 18327 3.07 15000 7 1 .22 80.39 20738 2.71 14990 8 0 .19 90.75 23316 2.35 14948 9 0 .17 101.07 26083 2.1 14941 1 0 015 113.69 29187 1.93 14905 1 1 214 126.62 32464 1.73 14876 1 2 513 139.07 35552 1.61 14867 1 4 011 154.89 39542 1.45 14830 1 6 010 173.37 44523 1.26 14779 1 8 09.5 184.46 47402 1.19 14752 2 0 08.2 212.09 54353 1.05 14708 2 2 5

7.6 226.98 57835 0.97 14529 M 1 3 4 1 2 2 5 _ _ - _ _ 7 . 5 L - - 718.7 112MA 213TC6.9 249.68 63607 0.88 14529 2 5 0

17 102.23 26364 3.73 20954 M 1 4 3 1 1 0 0 _ _ - _ _ 7 . 5 B - - 923.9 132SA 213TC14 124.89 31933 3.05 20932 1 1 213 135.31 34780 2.8 20914 1 2 512 142.66 36332 2.46 20918 1 4 011 154.57 39478 2.26 20908 1 6 09.4 185.56 47483 2.05 20830 1 8 08.4 208.15 53535 1.82 20801 2 0 08.2 211.96 54203 1.65 20825 2 2 5

7 246.73 62954 1.49 18122 M 1 4 4 1 2 2 5 _ _ - _ _ 7 . 5 L - - 974.4 112MA 213TC6.4 271.4 69232 1.35 18122 2 5 05.6 311.86 79515 1.18 18122 2 8 04.9 353.64 90035 1.04 18122 3 0 04.4 390.06 99366 0.94 18122 3 6 03.9 446.71 113726 0.82 18122 4 0 0

56

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

10.0 HP

1374 1.26 451 2.1 1243 M 0 7 1 2 1 . 2 _ _ - _ _ 1 0 . B - - 172.3 132M 215TC1249 1.39 498 2.1 1276 1 . 4956 1.81 649 2.1 1354 1 . 8841 2.06 738 2.1 1369 2 . 0693 2.5 900 1.82 1392 2 . 5630 2.75 990 1.73 1401 2 . 8548 3.16 1133 1.63 1394 3 . 2483 3.58 1281 1.51 1416 3 . 6438 3.95 1417 1.37 1372 4 . 0383 4.53 1622 1.19 1353 4 . 5338 5.12 1832 1.06 1385 5 . 0292 5.93 2122 0.91 1438 6 . 0

471 3.68 1287 2.1 1592 M 0 7 2 2 3 . 6 _ _ - _ _ 1 0 . B - - 203.2 132M 215TC340 5.09 1789 2.1 1622 5 . 0303 5.72 2013 2.1 1593 5 . 6275 6.29 2215 2.1 1570 6 . 3211 8.22 2908 1.87 1476 8 . 0185 9.34 3293 1.74 1409 9 . 0153 11.35 4006 1.54 1107 1 1 .139 12.48 4398 1.45 994 1 2 .121 14.34 5061 1.29 804 1 4 .107 16.26 5727 1.19 785 1 6 .97 17.94 6324 1.08 788 1 8 .84 20.54 7236 0.97 463 2 0 .

1380 1.25 450 3.73 1560 M 0 8 1 2 1 . 2 _ _ - _ _ 1 0 . B - - 205.4 132M 215TC1241 1.4 501 3.53 1605 1 . 4960 1.8 649 3.04 1717 1 . 8855 2.03 726 2.84 1759 2 . 0697 2.48 891 2.48 1771 2 . 5619 2.8 1008 2.26 1762 2 . 8531 3.26 1173 2.04 1772 3 . 2479 3.62 1301 1.9 1788 3 . 6438 3.96 1419 1.75 1797 4 . 0387 4.48 1603 1.61 1791 4 . 5343 5.05 1806 1.46 1780 5 . 0283 6.12 2196 1.23 1798 6 . 0242 7.14 2559 1.08 1798 7 . 1221 7.85 2805 1 1798 8 . 0

269 6.44 2268 3.9 3147 M 0 8 2 2 6 . 3 _ _ - _ _ 1 0 . B - - 275.9 132M 215TC208 8.33 2940 3.37 3282 8 . 0185 9.35 3306 3.13 3327 9 . 0151 11.47 4026 2.75 3439 1 1 .134 12.92 4575 2.5 3309 1 2 .115 15.04 5303 2.27 3289 1 4 .104 16.69 5871 2.11 3089 1 6 .95 18.26 6432 1.87 3024 1 8 .84 20.66 7265 1.78 2950 2 0 .74 23.32 8211 1.61 2886 2 2 .61 28.27 10002 1.35 2628 2 8 .53 32.97 11571 1.19 2361 3 2 .48 36.21 12747 1.11 2563 3 6 .39 44.38 15623 0.93 1964 4 5 .36 48.46 17032 0.86 1649 5 0 .

104 16.59 5878 3.81 5148 M 0 9 2 1 1 6 . _ _ - _ _ 1 0 . B - - 366.3 132M 215TC94 18.43 6518 3.54 5238 1 8 .84 20.59 7294 3.25 5350 2 0 .76 22.87 8101 3.03 5440 2 2 .67 26.04 9204 2.55 5490 2 5 .60 28.74 10156 2.31 5492 2 8 .54 32.31 11446 1.69 5687 3 2 .49 35.67 12539 1.55 5953 3 6 .43 40.25 14199 1.54 6316 4 0 .39 44.44 15687 1.39 6249 4 5 .35 49.07 17241 1.17 6114 5 0 .31 55.18 19366 0.93 6474 5 6 .28 61.13 21475 1.02 6429 6 3 .25 68.74 24081 0.91 6384 7 1 .

67 26.03 9175 3.64 7733 M 1 0 2 1 2 5 . _ _ - _ _ 1 0 . B - - 467.7 132M 215TC58 29.99 10563 3.16 8048 2 8 .56 30.76 10851 3.6 8138 3 2 .49 35.44 12461 3.13 8485 3 6 .47 37.06 13016 2.76 8595 4 0 .41 42.7 15013 2.43 8961 4 5 .36 47.93 16820 2.08 9240 5 0 .34 51.49 18047 1.9 9441 5 6 .30 57.75 20249 1.82 9756 6 3 .28 62.05 21672 1.7 9958 7 1 .

57

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

10.0 HP

58

29 60.23 20950 1.59 9846 M 1 0 3 1 5 6 . _ _ - _ _ 1 0 . B - - 527.3 132M 215TC26 66.93 23278 1.43 10127 6 3 .24 71.17 24744 1.51 10318 7 1 .22 79.08 27492 1.41 10397 8 0 .18 95.44 33167 1.01 10116 9 0 .16 109.97 38207 0.87 9914 1 0 015 112.77 39159 1 9914 1 1 213 129.94 45105 0.87 9667 1 2 5

40 43.45 15115 3.78 15017 M 1 3 2 1 4 5 . _ _ - _ _ 1 0 . B - - 600 132M 215TC

43 39.93 13917 3.36 14680 M 1 3 3 1 4 0 . _ _ - _ _ 1 0 . B - - 648.5 132M 215TC39 44.18 15319 3.44 15039 4 5 .35 50.02 17355 3.11 14994 5 0 .30 56.93 19806 2.67 14994 5 6 .27 64.17 22278 2.38 14953 6 3 .24 71.32 24619 2.28 14951 7 1 .22 80.39 27858 2.02 14928 8 0 .19 90.75 31322 1.75 14890 9 0 .17 101.07 35038 1.57 14871 1 0 015 113.69 39208 1.43 14826 1 1 214 126.62 43610 1.29 14792 1 2 512 139.07 47759 1.2 14770 1 4 011 154.89 53118 1.08 14725 1 6 010 173.37 59810 0.94 14657 1 8 0

22 78.7 27168 3.58 20952 M 1 4 3 1 7 1 . _ _ - _ _ 1 0 . B - - 932.9 132M 215TC20 86.76 29940 3.25 20952 8 0 .18 94.35 32608 3.01 20928 9 0 .17 102.23 35416 2.77 20901 1 0 014 124.89 42897 2.27 20867 1 1 213 135.31 46722 2.08 20839 1 2 512 142.66 48806 1.83 20849 1 4 011 154.57 53033 1.69 20828 1 6 09.3 185.56 63786 1.53 20727 1 8 08.3 208.15 71916 1.35 20693 2 0 08.2 211.96 72813 1.23 20727 2 2 5

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

12.4 HP

59

1382 1.26 556 1.7 1207 M 0 7 1 2 1 . 2 _ M _ - _ _ 1 2 . L - - 229.3 132MA1257 1.39 614 1.7 1238 1 . 4962 1.81 801 1.7 1309 1 . 8846 2.06 910 1.7 1332 2 . 0697 2.5 1110 1.47 1368 2 . 5633 2.75 1220 1.4 1381 2 . 8551 3.16 1397 1.32 1376 3 . 2486 3.58 1579 1.23 1407 3 . 6441 3.95 1748 1.11 1346 4 . 0385 4.53 2000 0.97 1324 4 . 5340 5.12 2259 0.86 1366 5 . 0

474 3.68 1587 1.7 1563 M 0 7 2 2 3 . 6 _ M _ - _ _ 1 2 . L - - 260.2 132MA342 5.09 2206 1.7 1576 5 . 0304 5.72 2482 1.7 1521 5 . 6277 6.29 2731 1.7 1472 6 . 3212 8.22 3586 1.52 1288 8 . 0186 9.34 4060 1.41 1169 9 . 0154 11.35 4940 1.25 852 1 1 .140 12.48 5423 1.17 701 1 2 .121 14.34 6239 1.05 446 1 4 .107 16.26 7061 0.96 408 1 6 .97 17.94 7797 0.88 410 1 8 .

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

15.0 HP

60

1382 1.26 673 1.41 1168 M 0 7 1 2 1 . 2 _ _ - _ _ 1 5 . L - - 251.3 132MB 254TC1257 1.39 742 1.41 1198 1 . 4962 1.81 969 1.41 1261 1 . 8846 2.06 1101 1.41 1292 2 . 0697 2.5 1343 1.22 1342 2 . 5633 2.75 1476 1.16 1360 2 . 8551 3.16 1689 1.09 1357 3 . 2486 3.58 1910 1.01 1398 3 . 6441 3.95 2114 0.92 1317 4 . 0385 4.53 2420 0.8 1292 4 . 5

474 3.68 1919 1.41 1533 M 0 7 2 2 3 . 6 _ _ - _ _ 1 5 . L - - 282.2 132MB 254TC342 5.09 2668 1.41 1526 5 . 0304 5.72 3002 1.41 1443 5 . 6277 6.29 3304 1.41 1366 6 . 3212 8.22 4337 1.25 1085 8 . 0186 9.34 4911 1.17 908 9 . 0154 11.35 5975 1.03 577 1 1 .140 12.48 6560 0.97 384 1 2 .121 14.34 7548 0.87 58 1 4 .

1398 1.25 667 2.52 1500 M 0 8 1 2 1 . 2 _ _ - _ _ 1 5 . B - - 280.4 160MA 254TC1257 1.4 742 2.38 1541 1 . 4972 1.8 961 2.05 1639 1 . 8866 2.03 1075 1.92 1677 2 . 0706 2.48 1320 1.68 1713 2 . 5626 2.8 1493 1.52 1721 2 . 8538 3.26 1738 1.38 1743 3 . 2485 3.62 1927 1.28 1776 3 . 6443 3.96 2102 1.18 1796 4 . 0392 4.48 2375 1.08 1786 4 . 5347 5.05 2675 0.99 1765 5 . 0

477 3.68 1913 2.84 2843 M 0 8 2 2 3 . 6 _ _ - _ _ 1 5 . B - - 351 160MA 254TC336 5.21 2723 2.84 3012 5 . 0303 5.79 3026 2.79 3046 5 . 6272 6.44 3359 2.63 3057 6 . 3211 8.33 4355 2.28 3113 8 . 0188 9.35 4896 2.11 3057 9 . 0153 11.47 5964 1.85 2944 1 1 .136 12.92 6777 1.68 2755 1 2 .117 15.04 7855 1.53 2553 1 4 .105 16.69 8697 1.42 2300 1 6 .96 18.26 9527 1.26 2114 1 8 .85 20.66 10761 1.2 1857 2 0 .75 23.32 12163 1.08 1597 2 2 .62 28.27 14816 0.91 1166 2 8 .53 32.97 17139 0.81 584 3 2 .

191 9.19 4821 3.76 4596 M 0 9 2 1 9 . 0 _ _ - _ _ 1 5 . B - - 441.3 160MA 254TC171 10.27 5387 3.55 4678 1 0 .150 11.71 6166 3.24 4771 1 1 .138 12.74 6692 3.03 4864 1 2 .121 14.53 7615 2.78 4970 1 4 .106 16.59 8707 2.57 4784 1 6 .95 18.43 9655 2.39 4792 1 8 .85 20.59 10804 2.2 4863 2 0 .77 22.87 12000 2.04 5007 2 2 .67 26.04 13632 1.72 5031 2 5 .61 28.74 15043 1.56 4950 2 8 .54 32.31 16954 1.14 5087 3 2 .49 35.67 18572 1.05 5449 3 6 .44 40.25 21032 1.04 6036 4 0 .39 44.44 23235 0.94 5912 4 5 .

107 16.43 8599 3.88 7011 M 1 0 2 1 1 6 . _ _ - _ _ 1 5 . B - - 542.8 160MA 254TC96 18.25 9548 3.49 7161 1 8 .90 19.41 10140 3.7 7232 2 0 .81 21.57 11262 3.45 7384 2 2 .67 26.03 13590 2.46 7445 2 5 .58 29.99 15646 2.13 7625 2 8 .57 30.76 16073 2.43 7907 3 2 .49 35.44 18457 2.11 8224 3 6 .47 37.06 19279 1.86 8330 4 0 .41 42.7 22237 1.64 8661 4 5 .37 47.93 24913 1.41 8891 5 0 .34 51.49 26731 1.28 9067 5 6 .30 57.75 29992 1.23 9344 6 3 .28 62.05 32101 1.15 9509 7 1 .

29 60.23 31031 1.08 9396 M 1 0 3 1 5 6 . _ _ - _ _ 1 5 . B - - 600.1 160MA 254TC26 66.93 34479 0.97 9631 6 3 .25 71.17 36650 1.02 9793 7 1 .22 79.08 40721 0.95 9825 8 0 .

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

15.0 HP

61

62 28.35 14721 3.73 13178 M 1 3 2 1 2 8 . _ _ - _ _ 1 5 . B - - 677.2 160MA 254TC55 31.89 16505 3.41 13613 3 2 .49 35.52 18393 3.06 14019 3 6 .45 39.01 20163 2.81 14194 4 0 .40 43.45 22388 2.55 14642 4 5 .

44 39.93 20613 2.27 14395 M 1 3 3 1 4 0 . _ _ - _ _ 1 5 . B - - 725.7 160MA 254TC40 44.18 22691 2.32 14725 4 5 .35 50.02 25706 2.1 14882 5 0 .31 56.93 29337 1.8 14898 5 6 .27 64.17 32998 1.6 14868 6 3 .25 71.32 36466 1.54 14853 7 1 .22 80.39 41264 1.36 14803 8 0 .19 90.75 46393 1.18 14773 9 0 .17 101.07 51898 1.06 14730 1 0 015 113.69 58075 0.97 14666 1 1 214 126.62 64594 0.87 14623 1 2 5

41 42.71 22111 3.94 19234 M 1 4 2 1 4 5 . _ _ - _ _ 1 5 . B - - 915.3 160MA 254TC

42 41.36 21229 3.78 19034 M 1 4 3 1 4 0 . _ _ - _ _ 1 5 . B - - 14.5 160MA 254TC36 48.21 24749 3.93 19851 4 5 .32 54.75 28075 3.47 20554 5 0 .30 59.46 30415 2.94 20983 5 6 .27 65.55 33576 2.72 20918 6 3 .22 78.7 40241 2.42 20809 7 1 .20 86.76 44347 2.2 20802 8 0 .19 94.35 48299 2.03 20833 9 0 .17 102.23 52459 1.87 20796 1 0 014 124.89 63539 1.53 20736 1 1 213 135.31 69204 1.41 20689 1 2 512 142.66 72291 1.24 20709 1 4 011 154.57 78552 1.14 20669 1 6 09.5 185.56 94479 1.03 20521 1 8 08.4 208.15 106521 0.91 20478 2 0 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

20.0 HP

1403 1.25 887 1.89 1440 M 0 8 1 2 1 . 2 _ _ - _ _ 2 0 . B - - 310.4 160L 256TC1261 1.4 986 1.79 1476 1 . 4975 1.8 1278 1.54 1560 1 . 8869 2.03 1429 1.44 1596 2 . 0708 2.48 1754 1.26 1656 2 . 5629 2.8 1984 1.15 1681 2 . 8540 3.26 2309 1.04 1715 3 . 2487 3.62 2560 0.96 1764 3 . 6

479 3.68 2542 2.14 2787 M 0 8 2 2 3 . 6 _ _ - _ _ 2 0 . B - - 381 160L 256TC338 5.21 3618 2.14 2944 5 . 0304 5.79 4021 2.1 2967 5 . 6273 6.44 4464 1.98 2967 6 . 3211 8.33 5787 1.71 2944 8 . 0188 9.35 6506 1.59 2787 9 . 0153 11.47 7925 1.4 2449 1 1 .136 12.92 9005 1.27 2202 1 2 .117 15.04 10438 1.15 1817 1 4 .105 16.69 11556 1.07 1512 1 6 .96 18.26 12659 0.95 1203 1 8 .85 20.66 14300 0.9 765 2 0 .75 23.32 16162 0.82 308 2 2 .

310 5.69 3953 3.85 4226 M 0 9 2 1 5 . 6 _ _ - _ _ 2 0 . B - - 471.3 160L 256TC266 6.63 4623 3.56 4293 6 . 3238 7.4 5175 3.32 4338 7 . 1214 8.22 5733 3.04 4406 8 . 0192 9.19 6406 2.83 4432 9 . 0171 10.27 7159 2.67 4440 1 0 .150 11.71 8194 2.44 4517 1 1 .138 12.74 8892 2.28 4596 1 2 .121 14.53 10118 2.09 4622 1 4 .106 16.59 11570 1.94 4421 1 6 .95 18.43 12830 1.8 4346 1 8 .85 20.59 14357 1.65 4376 2 0 .77 22.87 15945 1.54 4574 2 2 .68 26.04 18115 1.29 4572 2 5 .61 28.74 19989 1.17 4408 2 8 .54 32.31 22529 0.86 4488 3 2 .

147 11.98 8358 3.77 6541 M 1 0 2 1 1 1 . _ _ - _ _ 2 0 . B - - 572.8 160L 256TC141 12.51 8694 3.74 6586 1 2 .124 14.16 9837 3.45 6721 1 4 .107 16.43 11427 2.92 6797 1 6 .96 18.25 12687 2.63 6872 1 8 .91 19.41 13474 2.79 6926 2 0 .82 21.57 14965 2.6 6991 2 2 .68 26.03 18058 1.85 7156 2 5 .59 29.99 20790 1.6 7201 2 8 .57 30.76 21358 1.83 7677 3 2 .50 35.44 24525 1.59 7963 3 6 .47 37.06 25619 1.4 8065 4 0 .41 42.7 29549 1.23 8362 4 5 .37 47.93 33105 1.06 8542 5 0 .

78 22.55 15607 3.6 12499 M 1 3 2 1 2 2 . _ _ - _ _ 2 0 . B - - 707.2 160L 256TC69 25.45 17613 3.12 12633 2 5 .62 28.35 19561 2.81 12930 2 8 .55 31.89 21932 2.56 13326 3 2 .50 35.52 24441 2.3 13725 3 6 .45 39.01 26793 2.12 13820 4 0 .41 43.45 29750 1.92 14268 4 5 .

44 39.93 27391 1.71 14110 M 1 3 3 1 4 0 . _ _ - _ _ 2 0 . B - - 755.7 160L 256TC40 44.18 30152 1.75 14410 4 5 .35 50.02 34158 1.58 14769 5 0 .31 56.93 38983 1.36 14803 5 6 .27 64.17 43847 1.21 14783 6 3 .25 71.32 48455 1.16 14755 7 1 .22 80.39 54831 1.03 14679 8 0 .19 90.75 61647 0.89 14657 9 0 .

47 37.39 25772 3.71 18299 M 1 4 2 1 3 6 . _ _ - _ _ 2 0 . B - - 945.3 160L 256TC45 39.42 27023 3.2 18638 4 0 .41 42.71 29382 2.97 19053 4 5 .

43 41.36 28209 2.85 18842 M 1 4 3 1 4 0 . _ _ - _ _ 2 0 . B - - 44.5 160L 256TC37 48.21 32887 2.96 19621 4 5 .32 54.75 37306 2.61 20296 5 0 .30 59.46 40415 2.21 20716 5 6 .27 65.55 44616 2.04 20749 6 3 .22 78.7 53472 1.82 20667 7 1 .20 86.76 58928 1.65 20652 8 0 .19 94.35 64179 1.53 20738 9 0 .17 102.23 69706 1.41 20690 1 0 014 124.89 84429 1.15 20606 1 1 213 135.31 91958 1.06 20539 1 2 512 142.66 96059 0.93 20569 1 4 0

62

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


534 3.3 2869 3.33 3664 M 0 9 2 1 3 . 2 _ _ - _ _ 2 5 . B - - 659 D180M 284TC478 3.69 3202 2.98 3799 3 . 6432 4.09 3551 3.89 3934 4 . 0385 4.58 3988 3.62 4069 4 . 5348 5.07 4406 3.31 4136 5 . 0310 5.69 4930 3.09 4181 5 . 6266 6.63 5766 2.85 4215 6 . 3238 7.4 6454 2.66 4223 7 . 1214 8.22 7150 2.44 4279 8 . 0192 9.19 7989 2.27 4269 9 . 0172 10.27 8928 2.14 4203 1 0 .151 11.71 10219 1.96 4262 1 1 .138 12.74 11090 1.83 4328 1 2 .121 14.53 12620 1.68 4275 1 4 .106 16.59 14429 1.55 4057 1 6 .96 18.43 16001 1.44 3900 1 8 .86 20.59 17905 1.32 3889 2 0 .77 22.87 19886 1.23 4142 2 2 .68 26.04 22592 1.04 4113 2 5 .61 28.74 24929 0.94 3866 2 8 .

206 8.58 7425 3.85 6120 M 1 0 2 1 9 . 0 _ _ - _ _ 2 5 . B - - 760.4 D180M 284TC167 10.59 9191 3.34 6325 1 0 .147 11.98 10424 3.02 6449 1 1 .141 12.51 10843 3 6494 1 2 .125 14.16 12268 2.76 6617 1 4 .107 16.43 14252 2.34 6582 1 6 .97 18.25 15823 2.11 6584 1 8 .91 19.41 16805 2.23 6619 2 0 .82 21.57 18664 2.08 6598 2 2 .68 26.03 22522 1.48 6867 2 5 .59 29.99 25929 1.29 6778 2 8 .57 30.76 26637 1.47 7446 3 2 .50 35.44 30587 1.28 7702 3 6 .48 37.06 31951 1.12 7800 4 0 .

110 15.97 13826 3.97 11712 M 1 3 2 1 1 6 . _ _ - _ _ 2 5 . B - - 892.7 D180M 284TC98 18 15589 3.52 11937 1 8 .88 20 17266 3.26 12084 2 0 .78 22.55 19465 2.89 12290 2 2 .69 25.45 21967 2.5 12380 2 5 .62 28.35 24396 2.25 12682 2 8 .55 31.89 27353 2.05 13040 3 2 .50 35.52 30481 1.84 13430 3 6 .45 39.01 33415 1.7 13446 4 0 .41 43.45 37103 1.54 13893 4 5 .

44 39.93 34161 1.37 13825 M 1 3 3 1 4 0 . _ _ - _ _ 2 5 . B - - 941.2 D180M 284TC40 44.18 37604 1.4 14095 4 5 .35 50.02 42601 1.27 14657 5 0 .31 56.93 48618 1.09 14707 5 6 .27 64.17 54685 0.97 14697 6 3 .25 71.32 60432 0.93 14657 7 1 .

62 28.25 24321 3.63 16860 M 1 4 2 1 2 8 . _ _ - _ _ 2 5 . B - - 135.2 D180M 284TC51 34.51 29736 3.18 17737 3 2 .47 37.39 32142 2.97 18017 3 6 .45 39.42 33703 2.57 18473 4 0 .41 42.71 36644 2.38 18872 4 5 .

43 41.36 35181 2.28 18650 M 1 4 3 1 4 0 . _ _ - _ _ 2 5 . B - - 234.4 D180M 284TC37 48.21 41015 2.37 19392 4 5 .32 54.75 46527 2.09 20038 5 0 .30 59.46 50404 1.77 20449 5 6 .27 65.55 55643 1.64 20581 6 3 .22 78.7 66688 1.46 20525 7 1 .20 86.76 73493 1.32 20502 8 0 .19 94.35 80042 1.23 20642 9 0 .17 102.23 86936 1.13 20585 1 0 014 124.89 105298 0.92 20475 1 1 213 135.31 114687 0.85 20390 1 2 5

4 POLE

25.0 HP

63

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

30.0 HP

64

866 2.04 2132 3.9 3147 M 0 9 2 1 1 . 8 _ _ - _ _ 3 0 . B - - 690 D180L 286TC773 2.28 2388 3.78 3259 2 . 2689 2.56 2671 3.58 3368 2 . 5594 2.97 3089 3.92 3548 2 . 8534 3.3 3443 2.78 3632 3 . 2478 3.69 3843 2.49 3760 3 . 6432 4.09 4261 3.24 3902 4 . 0385 4.58 4785 3.01 4030 4 . 5348 5.07 5287 2.76 4094 5 . 0310 5.69 5916 2.57 4136 5 . 6266 6.63 6919 2.38 4136 6 . 3238 7.4 7745 2.22 4108 7 . 1214 8.22 8580 2.03 4153 8 . 0192 9.19 9587 1.89 4105 9 . 0172 10.27 10714 1.78 3965 1 0 .151 11.71 12263 1.63 4008 1 1 .138 12.74 13308 1.52 4060 1 2 .121 14.53 15144 1.4 3928 1 4 .106 16.59 17315 1.29 3694 1 6 .96 18.43 19201 1.2 3454 1 8 .86 20.59 21486 1.1 3402 2 0 .77 22.87 23864 1.03 3709 2 2 .

544 3.24 3391 3.76 4923 M 1 0 2 1 3 . 2 _ _ - _ _ 3 0 . B - - 791.4 D180L 286TC504 3.5 3653 3.54 5058 3 . 6262 6.72 7011 3.75 5889 6 . 3243 7.26 7556 3.54 5947 7 . 1222 7.95 8256 3.37 6011 8 . 0206 8.58 8911 3.21 6058 9 . 0167 10.59 11029 2.78 6243 1 0 .147 11.98 12509 2.52 6356 1 1 .141 12.51 13012 2.5 6401 1 2 .125 14.16 14722 2.3 6513 1 4 .107 16.43 17102 1.95 6368 1 6 .97 18.25 18988 1.76 6295 1 8 .91 19.41 20166 1.86 6312 2 0 .82 21.57 22397 1.73 6204 2 2 .68 26.03 27026 1.23 6579 2 5 .59 29.99 31114 1.07 6354 2 8 .57 30.76 31964 1.22 7216 3 2 .50 35.44 36705 1.06 7441 3 6 .

126 14.03 14570 3.82 11397 M 1 3 2 1 1 4 . _ _ - _ _ 3 0 . B - - 923.7 D180L 286TC110 15.97 16592 3.31 11540 1 6 .98 18 18707 2.93 11751 1 8 .88 20 20719 2.71 11916 2 0 .78 22.55 23358 2.41 12082 2 2 .69 25.45 26360 2.08 12127 2 5 .62 28.35 29275 1.87 12434 2 8 .55 31.89 32824 1.71 12754 3 2 .50 35.52 36578 1.54 13136 3 6 .45 39.01 40098 1.41 13072 4 0 .41 43.45 44523 1.28 13518 4 5 .

44 39.93 40993 1.14 13540 M 1 3 3 1 4 0 . _ _ - _ _ 3 0 . B - - 972.2 D180L 286TC40 44.18 45125 1.17 13780 4 5 .35 50.02 51121 1.05 14545 5 0 .31 56.93 58342 0.91 14612 5 6 .27 64.17 65622 0.81 14612 6 3 .

74 23.97 24841 3.85 16298 M 1 4 2 1 2 2 . _ _ - _ _ 3 0 . B - - 166.2 D180L 286TC68 26.07 26938 3.28 16523 2 5 .62 28.25 29186 3.02 16653 2 8 .51 34.51 35683 2.65 17407 3 2 .47 37.39 38571 2.48 17735 3 6 .45 39.42 40443 2.14 18307 4 0 .41 42.71 43973 1.98 18690 4 5 .

43 41.36 42218 1.9 18458 M 1 4 3 1 4 0 . _ _ - _ _ 3 0 . B - - 265.4 D180L 286TC37 48.21 49219 1.98 19162 4 5 .32 54.75 55832 1.74 19781 5 0 .30 59.46 60485 1.48 20182 5 6 .27 65.55 66772 1.37 20412 6 3 .22 78.7 80026 1.22 20382 7 1 .20 86.76 88192 1.1 20352 8 0 .19 94.35 96051 1.02 20547 9 0 .17 102.23 104323 0.94 20480 1 0 0

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

40.0 HP

1193 1.48 2061 3.19 2816 M 0 9 2 1 1 . 4 _ _ - _ _ 4 0 . B - - 810.8 D200L 324TC866 2.04 2842 2.93 3102 1 . 8773 2.28 3184 2.84 3214 2 . 2689 2.56 3562 2.68 3317 2 . 5594 2.97 4119 2.94 3497 2 . 8534 3.3 4591 2.08 3568 3 . 2478 3.69 5124 1.87 3683 3 . 6432 4.09 5682 2.43 3837 4 . 0385 4.58 6381 2.26 3953 4 . 5348 5.07 7049 2.07 4011 5 . 0310 5.69 7889 1.93 4046 5 . 6266 6.63 9226 1.78 3979 6 . 3238 7.4 10327 1.66 3877 7 . 1214 8.22 11440 1.52 3900 8 . 0192 9.19 12783 1.42 3778 9 . 0172 10.27 14285 1.34 3490 1 0 .151 11.71 16350 1.22 3498 1 1 .138 12.74 17744 1.14 3525 1 2 .121 14.53 20192 1.05 3234 1 4 .106 16.59 23087 0.97 2967 1 6 .96 18.43 25601 0.9 2562 1 8 .86 20.59 28649 0.83 2427 2 0 .

1223 1.44 2000 3.19 3799 M 1 0 2 1 1 . 4 _ _ - _ _ 4 0 . B - - 912.2 D200L 324TC876 2.01 2802 3.19 4211 1 . 8805 2.19 3051 3.19 4323 2 . 2709 2.49 3468 3.19 4496 2 . 5590 2.99 4133 3.19 4788 2 . 8544 3.24 4522 2.82 4870 3 . 2504 3.5 4871 2.65 4990 3 . 6422 4.18 5798 3.19 5305 4 . 0388 4.55 6325 3.19 5440 4 . 5357 4.94 6852 3.19 5590 5 . 0328 5.37 7463 3.19 5672 5 . 6262 6.72 9349 2.81 5792 6 . 3243 7.26 10075 2.65 5838 7 . 1222 7.95 11009 2.52 5896 8 . 0206 8.58 11881 2.41 5934 9 . 0167 10.59 14705 2.09 6081 1 0 .147 11.98 16679 1.89 6170 1 1 .141 12.51 17350 1.87 6215 1 2 .125 14.16 19630 1.73 6305 1 4 .107 16.43 22803 1.46 5938 1 6 .97 18.25 25317 1.32 5718 1 8 .91 19.41 26888 1.4 5699 2 0 .82 21.57 29863 1.3 5417 2 2 .68 26.03 36035 0.93 6002 2 5 .59 29.99 41486 0.8 5507 2 8 .

607 2.9 4032 3.82 8340 M 1 3 2 1 2 . 8 _ _ - _ _ 4 0 . B - - 46.7 D200L 324TC553 3.19 4426 3.82 8565 3 . 2485 3.64 5029 3.82 8902 3 . 6438 4.03 5608 3.82 9172 4 . 0399 4.42 6165 3.82 9419 4 . 5350 5.04 6999 3.82 9779 5 . 0319 5.54 7694 3.82 9959 5 . 6284 6.21 8645 3.82 10093 6 . 3256 6.88 9572 3.82 10206 7 . 1227 7.78 10800 3.82 10363 8 . 0205 8.62 11959 3.82 10476 9 . 0178 9.89 13767 3.82 10678 1 0 .158 11.2 15588 3.37 10880 1 1 .142 12.39 17140 3.23 11038 1 2 .126 14.03 19426 2.87 11123 1 4 .110 15.97 22122 2.48 11197 1 6 .98 18 24943 2.2 11379 1 8 .88 20 27626 2.03 11581 2 0 .78 22.55 31144 1.8 11665 2 2 .69 25.45 35147 1.56 11620 2 5 .62 28.35 39033 1.41 11939 2 8 .55 31.89 43765 1.28 12182 3 2 .50 35.52 48771 1.15 12548 3 6 .45 39.01 53465 1.06 12324 4 0 .41 43.45 59365 0.96 12768 4 5 .

44 39.93 54658 0.85 12971 M 1 3 3 1 4 0 . _ _ - _ _ 4 0 . B - - 95.2 D200L 324TC40 44.18 60167 0.88 13151 4 5 .

97 18.11 25127 3.41 15421 M 1 4 2 1 1 8 . _ _ - _ _ 4 0 . B - - 291.4 D200L 324TC81 21.75 29980 3.13 15848 2 0 .74 23.97 33121 2.89 15858 2 2 .68 26.07 35917 2.46 16078 2 5 .62 28.25 38914 2.27 16240 2 8 .51 34.51 47578 1.99 16748 3 2 .47 37.39 51428 1.86 17171 3 6 .45 39.42 53924 1.61 17975 4 0 .41 42.71 58630 1.49 18327 4 5 .

43 41.36 56290 1.43 18074 M 1 4 3 1 4 0 . _ _ - _ _ 4 0 . B - - 390.6 D200L 324TC37 48.21 65625 1.48 18703 4 5 .32 54.75 74443 1.31 19265 5 0 .30 59.46 80647 1.11 19648 5 6 .27 65.55 89030 1.02 20075 6 3 .22 78.7 106702 0.91 20097 7 1 .20 86.76 117589 0.83 20052 8 0 .

65

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

50.0 HP

1197 1.48 2568 2.56 2790 M 0 9 2 1 1 . 4 _ _ - _ _ 5 0 . B - - 941.6 D225S 326TC869 2.04 3541 2.35 3057 1 . 8776 2.28 3966 2.28 3169 2 . 2691 2.56 4437 2.15 3266 2 . 5596 2.97 5131 2.36 3445 2 . 8536 3.3 5720 1.67 3503 3 . 2480 3.69 6383 1.5 3606 3 . 6433 4.09 7079 1.95 3773 4 . 0386 4.58 7949 1.81 3876 4 . 5349 5.07 8782 1.66 3927 5 . 0311 5.69 9828 1.55 3956 5 . 6267 6.63 11493 1.43 3821 6 . 3239 7.4 12865 1.33 3647 7 . 1215 8.22 14251 1.22 3647 8 . 0193 9.19 15925 1.14 3451 9 . 0172 10.27 17796 1.07 3015 1 0 .151 11.71 20369 0.98 2989 1 1 .139 12.74 22105 0.92 2989 1 2 .122 14.53 25154 0.84 2539 1 4 .

1227 1.44 2491 2.56 3776 M 1 0 2 1 1 . 4 _ _ - _ _ 5 0 . B - - 43.1 D225S 326TC878 2.01 3490 2.56 4173 1 . 8808 2.19 3801 2.56 4286 2 . 2711 2.49 4320 2.56 4451 2 . 5592 2.99 5149 2.56 4743 2 . 8546 3.24 5633 2.26 4818 3 . 2506 3.5 6068 2.13 4923 3 . 6424 4.18 7223 2.56 5238 4 . 0389 4.55 7880 2.56 5372 4 . 5358 4.94 8536 2.56 5515 5 . 0330 5.37 9297 2.56 5590 5 . 6263 6.72 11646 2.26 5695 6 . 3244 7.26 12552 2.13 5729 7 . 1223 7.95 13714 2.03 5780 8 . 0206 8.58 14801 1.93 5811 9 . 0167 10.59 18319 1.68 5918 1 0 .148 11.98 20778 1.52 5985 1 1 .141 12.51 21614 1.5 6030 1 2 .125 14.16 24454 1.39 6097 1 4 .108 16.43 28407 1.17 5509 1 6 .97 18.25 31539 1.06 5140 1 8 .91 19.41 33496 1.12 5086 2 0 .82 21.57 37203 1.04 4630 2 2 .

609 2.9 5024 3.07 8306 M 1 3 2 1 2 . 8 _ _ - _ _ 5 0 . B - - 177.5 D225S 326TC555 3.19 5514 3.07 8528 3 . 2486 3.64 6265 3.07 8863 3 . 6440 4.03 6987 3.07 9127 4 . 0400 4.42 7680 3.07 9368 4 . 5351 5.04 8719 3.07 9722 5 . 0320 5.54 9586 3.07 9897 5 . 6285 6.21 10769 3.07 10023 6 . 3257 6.88 11924 3.07 10130 7 . 1228 7.78 13455 3.07 10265 8 . 0205 8.62 14898 3.07 10355 9 . 0179 9.89 17150 3.07 10512 1 0 .158 11.2 19419 2.71 10672 1 1 .143 12.39 21352 2.59 10804 1 2 .126 14.03 24201 2.3 10848 1 4 .111 15.97 27559 1.99 10854 1 6 .98 18 31073 1.77 11007 1 8 .88 20 34415 1.63 11246 2 0 .78 22.55 38798 1.45 11248 2 2 .70 25.45 43785 1.25 11113 2 5 .62 28.35 48626 1.13 11443 2 8 .56 31.89 54521 1.03 11610 3 2 .50 35.52 60757 0.93 11959 3 6 .45 39.01 66605 0.85 11577 4 0 .

155 11.43 19713 3.88 14230 M 1 4 2 1 1 1 . _ _ - _ _ 5 0 . B - - 424.5 D225S 326TC133 13.32 22794 3.96 14567 1 2 .117 15.13 26101 3.53 14837 1 4 .108 16.43 28367 2.93 15039 1 6 .98 18.11 31302 2.74 15202 1 8 .81 21.75 37348 2.51 15458 2 0 .74 23.97 41261 2.32 15419 2 2 .68 26.07 44744 1.97 15634 2 5 .63 28.25 48478 1.82 15826 2 8 .51 34.51 59271 1.6 16088 3 2 .47 37.39 64067 1.49 16607 3 6 .45 39.42 67177 1.29 17644 4 0 .41 42.71 73040 1.19 17965 4 5 .

66

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

60.0 HP

1197 1.48 3081 2.13 2765 M 0 9 2 1 1 . 4 _ _ - _ _ 6 0 . B - - 18.6 D225M 364TC869 2.04 4249 1.96 3012 1 . 8776 2.28 4759 1.9 3124 2 . 2691 2.56 5325 1.79 3214 2 . 5596 2.97 6158 1.97 3394 2 . 8536 3.3 6864 1.39 3439 3 . 2480 3.69 7660 1.25 3529 3 . 6433 4.09 8494 1.63 3709 4 . 0386 4.58 9539 1.51 3799 4 . 5349 5.07 10538 1.39 3844 5 . 0311 5.69 11793 1.29 3866 5 . 6267 6.63 13792 1.19 3664 6 . 3239 7.4 15438 1.11 3417 7 . 1215 8.22 17102 1.02 3394 8 . 0193 9.19 19110 0.95 3124 9 . 0172 10.27 21355 0.9 2540 1 0 .

1227 1.44 2990 2.13 3754 M 1 0 2 1 1 . 4 _ _ - _ _ 6 0 . B - - 120.1 D225M 364TC878 2.01 4188 2.13 4136 1 . 8808 2.19 4562 2.13 4248 2 . 2711 2.49 5184 2.13 4406 2 . 5592 2.99 6179 2.13 4698 2 . 8546 3.24 6760 1.89 4765 3 . 2506 3.5 7281 1.77 4855 3 . 6424 4.18 8668 2.13 5170 4 . 0389 4.55 9456 2.13 5305 4 . 5358 4.94 10244 2.13 5440 5 . 0330 5.37 11156 2.13 5507 5 . 6263 6.72 13976 1.88 5597 6 . 3244 7.26 15062 1.77 5620 7 . 1223 7.95 16457 1.69 5665 8 . 0206 8.58 17761 1.61 5687 9 . 0167 10.59 21983 1.4 5755 1 0 .148 11.98 24934 1.26 5800 1 1 .141 12.51 25936 1.25 5844 1 2 .125 14.16 29345 1.16 5889 1 4 .108 16.43 34088 0.98 5080 1 6 .97 18.25 37847 0.88 4563 1 8 .91 19.41 40195 0.93 4473 2 0 .82 21.57 44644 0.87 3844 2 2 .

609 2.9 6028 2.55 8272 M 1 3 2 1 2 . 8 _ _ - _ _ 6 0 . B - - 254.5 D225M 364TC555 3.19 6617 2.55 8492 3 . 2486 3.64 7518 2.55 8823 3 . 6440 4.03 8384 2.55 9082 4 . 0400 4.42 9216 2.55 9318 4 . 5351 5.04 10463 2.55 9666 5 . 0320 5.54 11503 2.55 9835 5 . 6285 6.21 12923 2.55 9953 6 . 3257 6.88 14309 2.55 10054 7 . 1228 7.78 16146 2.55 10166 8 . 0205 8.62 17878 2.55 10234 9 . 0179 9.89 20581 2.55 10346 1 0 .158 11.2 23303 2.26 10464 1 1 .143 12.39 25623 2.16 10571 1 2 .126 14.03 29041 1.92 10573 1 4 .111 15.97 33071 1.66 10511 1 6 .98 18 37288 1.47 10636 1 8 .88 20 41298 1.36 10911 2 0 .78 22.55 46557 1.21 10831 2 2 .70 25.45 52542 1.04 10606 2 5 .62 28.35 58352 0.94 10948 2 8 .56 31.89 65426 0.86 11037 3 2 .

613 2.89 5979 3.73 10678 M 1 4 2 1 2 . 8 _ _ - _ _ 6 0 . B - - 501.5 D225M 364TC545 3.25 6738 3.73 11060 3 . 2463 3.82 7901 3.73 11577 3 . 6439 4.03 8352 3.73 11757 4 . 0390 4.54 9420 3.73 12162 4 . 5332 5.33 11057 3.73 12746 5 . 0295 6 12433 3.73 13038 5 . 6270 6.55 13596 3.73 13173 6 . 3243 7.27 15115 3.73 13331 7 . 1204 8.67 17962 3.73 13578 8 . 0184 9.62 19955 3.73 13735 9 . 0176 10.06 20798 3.55 13848 1 0 .155 11.43 23655 3.23 14121 1 1 .133 13.32 27353 3.3 14439 1 2 .117 15.13 31322 2.94 14660 1 4 .108 16.43 34040 2.44 14866 1 6 .98 18.11 37563 2.28 14983 1 8 .81 21.75 44818 2.09 15067 2 0 .74 23.97 49513 1.93 14979 2 2 .68 26.07 53693 1.64 15189 2 5 .63 28.25 58174 1.52 15412 2 8 .51 34.51 71126 1.33 15429 3 2 .47 37.39 76881 1.24 16042 3 6 .45 39.42 80613 1.07 17312 4 0 .41 42.71 87648 0.99 17602 4 5 .

67

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

75.0 HP

68

609 2.9 7536 2.04 8222 M 1 3 2 1 2 . 8 _ _ - _ _ 7 5 . B - - 424.4 D250M 365TC555 3.19 8272 2.04 8437 3 . 2486 3.64 9398 2.04 8764 3 . 6440 4.03 10481 2.04 9014 4 . 0400 4.42 11520 2.04 9242 4 . 5351 5.04 13079 2.04 9582 5 . 0320 5.54 14379 2.04 9742 5 . 6285 6.21 16154 2.04 9848 6 . 3257 6.88 17887 2.04 9940 7 . 1228 7.78 20182 2.04 10019 8 . 0205 8.62 22348 2.04 10053 9 . 0179 9.89 25726 2.04 10098 1 0 .158 11.2 29129 1.8 10152 1 1 .143 12.39 32029 1.73 10221 1 2 .126 14.03 36301 1.53 10161 1 4 .111 15.97 41339 1.33 9996 1 6 .98 18 46610 1.18 10078 1 8 .88 20 51623 1.09 10408 2 0 .78 22.55 58197 0.97 10206 2 2 .70 25.45 65678 0.84 9846 2 5 .

613 2.89 7474 2.98 10639 M 1 4 2 1 2 . 8 _ _ - _ _ 7 5 . B - - 677.9 D250M 365TC545 3.25 8423 2.98 11015 3 . 2463 3.82 9877 2.98 11527 3 . 6439 4.03 10440 2.98 11701 4 . 0390 4.54 11775 2.98 12100 4 . 5332 5.33 13822 2.98 12667 5 . 0295 6 15542 2.98 12954 5 . 6270 6.55 16995 2.98 13083 6 . 3243 7.27 18894 2.98 13229 7 . 1204 8.67 22453 2.98 13454 8 . 0184 9.62 24944 2.98 13595 9 . 0176 10.06 25997 2.84 13707 1 0 .155 11.43 29569 2.59 13957 1 1 .133 13.32 34191 2.64 14246 1 2 .117 15.13 39152 2.35 14395 1 4 .108 16.43 42551 1.95 14606 1 6 .98 18.11 46954 1.83 14654 1 8 .81 21.75 56022 1.67 14481 2 0 .74 23.97 61892 1.54 14320 2 2 .68 26.07 67116 1.31 14522 2 5 .63 28.25 72718 1.21 14792 2 8 .51 34.51 88907 1.07 14439 3 2 .47 37.39 96101 0.99 15196 3 6 .45 39.42 100766 0.86 16815 4 0 .

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

100 HP

69

614 2.9 9980 1.54 8138 M 1 3 2 1 2 . 8 _ _ - _ _ 1 0 0 B - - 699.4 D280S 405TC559 3.19 10955 1.54 8346 3 . 2490 3.64 12446 1.54 8666 3 . 6443 4.03 13880 1.54 8902 4 . 0403 4.42 15257 1.54 9115 4 . 5353 5.04 17322 1.54 9441 5 . 0322 5.54 19042 1.54 9588 5 . 6287 6.21 21394 1.54 9672 6 . 3259 6.88 23688 1.54 9751 7 . 1229 7.78 26728 1.54 9773 8 . 0207 8.62 29596 1.54 9751 9 . 0180 9.89 34070 1.54 9683 1 0 .159 11.2 38577 1.36 9632 1 1 .144 12.39 42418 1.3 9638 1 2 .127 14.03 48076 1.16 9474 1 4 .112 15.97 54748 1 9138 1 6 .99 18 61728 0.89 9149 1 8 .

617 2.89 9898 2.25 10573 M 1 4 2 1 2 . 8 _ _ - _ _ 1 0 0 B - - 952.9 D280S 405TC549 3.25 11156 2.25 10940 3 . 2466 3.82 13080 2.25 11442 3 . 6442 4.03 13827 2.25 11607 4 . 0393 4.54 15594 2.25 11997 4 . 5334 5.33 18305 2.25 12536 5 . 0297 6 20583 2.25 12814 5 . 6272 6.55 22508 2.25 12933 6 . 3245 7.27 25022 2.25 13061 7 . 1206 8.67 29736 2.25 13248 8 . 0185 9.62 33035 2.25 13361 9 . 0177 10.06 34430 2.14 13473 1 0 .156 11.43 39160 1.95 13684 1 1 .134 13.32 45281 1.99 13925 1 2 .118 15.13 51851 1.78 13954 1 4 .108 16.43 56352 1.47 14172 1 6 .98 18.11 62183 1.38 14106 1 8 .82 21.75 74194 1.26 13505 2 0 .74 23.97 81967 1.17 13221 2 2 .68 26.07 88886 0.99 13410 2 5 .63 28.25 96304 0.92 13758 2 8 .52 34.51 117745 0.8 12791 3 2 .

0311


N2R/MIN

i lbin

Fm lbf lb

Ratio OutputTorque

ServiceFactor

OverhungLoad

Unit Designation

IECMotorSize

Weight ofbase

mount unit

NEMAMotorSize

OutputSpeed



NOTE


4 POLE

120 HP

70

614 2.9 11976 1.29 8070 M 1 3 2 1 2 . 8 _ M _ - _ _ 1 2 0 B - - 898.4 D280M559 3.19 13146 1.29 8272 3 . 2490 3.64 14936 1.29 8587 3 . 6443 4.03 16656 1.29 8812 4 . 0403 4.42 18308 1.29 9014 4 . 5353 5.04 20786 1.29 9329 5 . 0322 5.54 22851 1.29 9464 5 . 6287 6.21 25673 1.29 9531 6 . 3259 6.88 28426 1.29 9599 7 . 1229 7.78 32074 1.29 9576 8 . 0207 8.62 35516 1.29 9509 9 . 0180 9.89 40884 1.29 9351 1 0 .159 11.2 46292 1.14 9217 1 1 .144 12.39 50901 1.09 9172 1 2 .127 14.03 57691 0.96 8924 1 4 .112 15.97 65697 0.84 8452 1 6 .

617 2.89 11878 1.88 10521 M 1 4 2 1 2 . 8 _ M _ - _ _ 1 2 0 B - - 151.9 D280M549 3.25 13387 1.88 10880 3 . 2466 3.82 15696 1.88 11375 3 . 6442 4.03 16592 1.88 11532 4 . 0393 4.54 18713 1.88 11914 4 . 5334 5.33 21966 1.88 12431 5 . 0297 6 24700 1.88 12701 5 . 6272 6.55 27010 1.88 12814 6 . 3245 7.27 30026 1.88 12926 7 . 1206 8.67 35683 1.88 13083 8 . 0185 9.62 39643 1.88 13173 9 . 0177 10.06 41316 1.79 13286 1 0 .156 11.43 46993 1.63 13466 1 1 .134 13.32 54337 1.66 13668 1 2 .118 15.13 62222 1.48 13600 1 4 .108 16.43 67623 1.23 13825 1 6 .98 18.11 74620 1.15 13668 1 8 .82 21.75 89032 1.05 12723 2 0 .74 23.97 98360 0.97 12341 2 2 .68 26.07 106663 0.83 12521 2 5 .

0311

s

c

nb

f

h

p3 p

a

e

i

L

L12

ød

h1

TappedHole w

kb

k

ko

t

uLow Speed Shaft

g1

g g2

g6

0311

71

DIMENSIONS - SINGLE REDUCTIONBASE MOUNT

M0512

M0612

M0712

M0812

4.33 4.92 0.67 5.39 5.98 2.48 1.85 2.20 1.06 8.58 7.09 0.43 0.75 1.575 19/32 0.829 3/161/4 UNF x

0.63 deep

4.72 5.31 0.79 5.91 6.69 3.15 2.36 2.95 1.38 10.16 9.06 0.55 1.0 1.969 19/16 1.106 1/41/4 UNF x

0.71 deep

5.91 6.69 0.98 7.48 8.35 3.54 2.91 3.35 1.65 12.05 10.63 0.69 1.25 2.362 2 1.359 1/41/4 UNF x

0.71 deep

6.30 8.46 1.18 8.11 10.43 3.94 3.82 4.33 2.36 13.86 12.68 0.69 1.625 3.15 23/8 1.784 3/85/8 UNF x

1.25 deep

aSIZE b ec f h1h n p3 sL ut w

iLow Speed Shaft

dp

L12

Ko* g g1** g2 g6 K* Kb* K* Kb*

63 8.58 4.80 3.78 6.30 5.51 16.73 18.50 16.77 18.54

71 8.70 5.43 4.02 6.57 4.13 17.01 18.74 17.13 18.86

80A 9.41 6.18 4.92 7.48 4.72 18.23 20.28 18.54 20.59

80B 9.76 6.18 4.92 7.48 4.72 18.58 20.63 18.90 20.94

90S 10.24 6.97 5.24 8.58 5.51 19.45 21.50 19.76 21.81

90L 10.83 6.97 5.24 8.58 5.51 20.04 22.09 20.35 22.40

90LA 11.18 6.97 5.24 8.58 5.51 20.39 22.44 20.71 22.76

100L 12.20 7.76 5.67 9.37 6.30 20.98 23.35 22.80 25.16

112M 12.80 8.62 6.10 9.37 6.30 21.57 24.49 23.39 26.30

112MA 13.54 8.62 6.10 9.37 6.30 22.32 25.28 24.13 27.09

132SA 15.43 9.25 6.77 11.34 7.87 - - 25.98 29.25

132M 16.22 9.25 6.77 11.34 7.87 - - 26.77 30.04

132MA 17.17 9.25 6.77 11.34 7.87 - - 27.72 30.98

132MB 18.58 9.25 6.77 11.34 7.87 - - 29.13 32.40

160M 17.91 10.75 11.10 12.72 13.78 - - - -

160L 19.69 10.75 11.10 12.72 13.78 - - - -

ALL SIZES OF IEC MOTOR M0512 M0612

ALL SIZES OF NEMA MOTOR M0512 M0612

NEMA

56C

143-145TC

182-184TC

213-215TC

254-256TC


12.00 7.19 5.00 - 6.50 21.37 - 21.69 -

12.00 7.19 5.25 - 6.50 21.37 - 21.69 -

15.50 8.50 5.88 - 9.00 24.12 - 26.17 -

16.50 10.19 7.38 - 9.00 - - 27.17 -

20.00 12.50 9.63 - 10.00 - - - -


NEMA

56C

143-145TC

182-184TC

213-215TC

254-256TC


12.00 7.19 5.00 - 6.50 23.42 - 24.95 -

12.00 7.19 5.25 - 6.50 23.42 - 24.95 -

15.50 8.50 5.88 - 9.00 27.27 - 28.45 -

16.50 10.19 7.38 - 9.00 28.27 - 29.45 -

20.00 12.50 9.63 - 10.00 31.69 - 32.95 -


63 8.58 4.80 3.78 6.30 5.51 - - - -

71 8.70 5.43 4.02 6.57 4.13 - - - -

80A 9.41 6.18 4.92 7.48 4.72 20.24 22.28 22.09 24.13

80B 9.76 6.18 4.92 7.48 4.72 20.59 22.64 22.44 24.49

90S 10.24 6.97 5.24 8.58 5.51 21.46 23.50 22.91 24.96

90L 10.83 6.97 5.24 8.58 5.51 22.05 24.09 23.50 25.55

90LA 11.18 6.97 5.24 8.58 5.51 22.40 24.45 23.86 25.91

100L 12.20 7.76 5.67 9.37 6.30 23.86 26.22 25.12 27.48

112M 12.80 8.62 6.10 9.37 6.30 24.45 27.36 25.71 28.62

112MA 13.54 8.62 6.10 9.37 6.30 25.20 28.15 26.46 29.41

132SA 15.43 9.25 6.77 11.34 7.87 27.99 31.26 28.35 31.61

132M 16.22 9.25 6.77 11.34 7.87 28.78 32.05 29.13 32.40

132MA 17.17 9.25 6.77 11.34 7.87 29.72 32.99 30.08 33.35

132MB 18.58 9.25 6.77 11.34 7.87 31.14 34.41 31.50 34.76

160M 17.91 10.75 11.10 12.72 13.78 30.79 34.06 32.01 35.28

160L 19.69 10.75 11.10 12.72 13.78 32.56 35.83 33.78 37.05


0311

72


kb - for brake motorsg2 - hand release if required

*Motor Lengths for TPT standard motors, These lengths may vary if alternative motor is fitted.

**Dimension over terminal box from centreline.

t

g2

u

Low Speed Shaft

s

c

nb

f

h

o1

o

g1

g

h1 g6

a

e

i

LL12

d

TappedHole w

p3p

ko

k

kb

0205

aSIZE b ec f h1h n o o1 p p3 sL utL12

DIMENSIONS - DOUBLE REDUCTIONBASE MOUNT

wi

Low Speed Shaft

d

M0122

M0222

M0322

M0422

M0522

M0622

M0722

M0822

M0921

M1021

M1321

M1421

1/4 UNF x 0.63 deep1/4 UNF x 0.71 deep1/4 UNF x 0.71 deep3/8 UNF x 0.86 deep3/8 UNF x 0.75 deep3/8 UNF x 0.75 deep5/8 UNF x 1.25 deep3/4 UNF x 1.50 deep3/4 UNF x 1.65 deep3/4 UNF x 1.65 deep1 UNF x

1.97 deep1 UNF x

1.97 deep

4.33 4.33 0.47 5.16 5.31 2.95 - 2.28 0.98 5.98 2.99 - 5.87 0.39 0.75 1.575 19/32 0.829 3/16

5.12 4.33 0.63 5.98 5.71 3.54 - 2.95 1.38 6.69 3.31 - 7.09 0.39 1.0 1.969 19/16 1.106 1/4

5.12 4.33 0.63 5.98 5.71 3.54 - 2.95 1.38 6.69 3.31 - 7.09 0.39 1.0 1.969 19/16 1.106 1/4

6.50 5.31 0.79 7.87 7.48 4.53 - 3.54 2.17 8.03 3.82 - 8.19 0.59 1.25 2.362 2 1.359 1/4

6.50 5.31 0.79 7.87 7.48 4.53 - 3.94 2.17 8.03 3.82 - 8.19 0.59 1.375 2.756 23/8 1.507 5/16

7.68 5.91 0.94 9.25 8.27 5.12 0.57 3.94 2.36 8.66 4.33 9.69 8.43 0.59 1.375 2.756 23/8 1.507 5/16

8.07 6.69 0.98 9.65 9.06 5.51 - 4.53 2.36 9.92 4.69 11.61 9.84 0.75 1.625 3.15 23/8 1.784 3/8

10.24 8.46 1.38 12.20 11.42 7.09 - 5.51 2.95 12.60 6.57 14.17 12.20 0.75 2.125 3.937 23/4 2.338 1/2

12.20 9.84 1.57 14.37 13.39 8.86 - 6.30 3.54 14.65 7.87 17.05 15.51 0.91 2.375 4.72 311/16 2.65 0.625

14.57 11.42 1.77 17.32 15.75 9.84 - 7.28 4.33 16.85 8.86 19.88 17.56 1.06 2.875 5.51 45/8 3.20 0.75

16.14 13.39 1.97 19.29 17.72 10.43 - 8.66 4.33 18.50 9.53 22.17 19.02 1.34 3.625 6.69 515/16 4.01 0.875

19.69 14.96 1.97 23.23 20.87 11.81 - 10.24 5.91 21.50 10.94 24.80 21.69 1.61 4.00 8.27 71/2 4.44 1.00

ALL SIZES OF IEC MOTOR

Ko* g g2 g6

M0122

g1**

M0222 M0322 M0422

K* Kb*

M0522

K*

M0622

Kb* K* Kb* K* Kb* K* Kb* K* Kb*63 8.58 4.80 3.78 6.30 5.51 16.81 18.58 18.03 19.80 18.03 19.80 19.21 20.98 19.61 21.38 20.43 22.2071 8.70 5.43 4.02 6.57 4.13 17.09 18.82 18.31 20.04 18.31 20.04 19.57 21.30 19.96 21.69 20.79 22.5280A 9.41 6.18 4.92 7.48 4.72 18.31 20.35 19.53 21.57 19.53 21.57 20.98 23.03 21.38 23.43 22.20 24.2580B 9.76 6.18 4.92 7.48 4.72 18.66 20.71 19.88 21.93 19.88 21.93 21.34 23.39 21.73 23.78 22.56 24.6190S 10.24 6.97 5.24 8.58 5.51 19.53 21.57 20.75 22.80 20.75 22.80 22.20 24.25 22.60 24.65 23.43 25.4790L 10.83 6.97 5.24 8.58 5.51 20.12 22.17 21.34 23.39 21.34 23.39 22.80 24.84 23.19 25.24 24.02 26.0690LA 11.18 6.97 5.24 8.58 5.51 20.47 22.52 21.69 23.74 21.69 23.74 23.15 25.20 23.54 25.59 24.37 26.42100L 12.20 7.76 5.67 9.37 6.30 21.06 23.43 22.28 24.65 22.28 24.65 25.24 27.60 25.63 27.99 26.46 28.82112M 12.80 8.62 6.10 9.37 6.30 21.65 24.57 22.87 25.79 22.87 25.79 25.83 28.74 26.22 29.13 27.05 29.96112MA 13.54 8.62 6.10 9.37 6.30 22.40 25.35 23.62 26.57 23.62 26.57 26.57 29.53 26.97 29.92 27.80 30.75132SA 15.43 9.25 6.77 11.34 7.87 - - - - - - 28.43 31.69 28.82 32.09 29.65 32.91132M 16.22 9.25 6.77 11.34 7.87 - - - - - - 29.21 32.48 29.61 32.87 30.43 33.70132MA 17.17 9.25 6.77 11.34 7.87 - - - - - - 30.16 33.43 30.55 33.82 31.38 34.65132MB 18.58 9.25 6.77 11.34 7.87 - - - - - - - - - - - -160M 17.91 10.75 11.10 12.72 13.78 - - - - - - - - - - - -160L 19.69 10.75 11.10 12.72 13.78 - - - - - - - - - - - -180M 21.93 15.04 12.09 - 13.78 - - - - - - - - - - - -180L 23.43 15.04 12.09 - 13.78 - - - - - - - - - - - -200L 25.91 16.54 14.65 - 15.75 - - - - - - - - - - - -225S 26.42 18.03 16.81 - 17.72 - - - - - - - - - - - -225M 27.40 18.03 16.81 - 17.72 - - - - - - - - - - - -250M 30.35 20.08 19.29 - 21.65 - - - - - - - - - - - -280S 32.95 22.68 20.47 - 21.65 - - - - - - - - - - - -280M 34.96 22.68 20.47 - 21.65 - - - - - - - - - - - -

73

63 8.58 4.80 3.78 6.30 5.51 - - - - - - - - - - - -

71 8.70 5.43 4.02 6.57 4.13 - - - - - - - - - - - -

80A 9.41 6.18 4.92 7.48 4.72 23.66 25.71 26.81 28.86 30.00 32.05 - - - - - -

80B 9.76 6.18 4.92 7.48 4.72 24.02 26.06 27.17 29.21 30.35 32.40 - - - - - -

90S 10.24 6.97 5.24 8.58 5.51 24.88 26.93 27.64 29.69 30.83 32.87 - - - - - -

90L 10.83 6.97 5.24 8.58 5.51 25.47 27.52 28.23 30.28 31.42 33.46 - - - - - -

90LA 11.18 6.97 5.24 8.58 5.51 25.83 27.87 28.58 30.63 31.77 33.82 - - - - - -

100L 12.20 7.76 5.67 9.37 6.30 27.28 29.65 29.84 32.20 33.03 35.39 35.67 38.03 40.43 42.80 44.96 47.32

112M 12.80 8.62 6.10 9.37 6.30 27.87 30.79 30.43 33.35 33.62 36.54 36.26 39.17 41.02 43.94 45.55 48.46

112MA 13.54 8.62 6.10 9.37 6.30 28.62 31.57 31.18 34.13 34.37 37.32 37.01 39.96 41.77 44.72 46.30 49.25

132SA 15.43 9.25 6.77 11.34 7.87 31.42 34.69 33.07 36.34 36.26 39.53 38.90 42.17 43.66 46.93 48.19 51.46

132M 16.22 9.25 6.77 11.34 7.87 32.20 35.47 33.86 37.13 37.05 40.31 39.69 42.95 44.45 47.72 48.98 52.24

132MA 17.17 9.25 6.77 11.34 7.87 33.15 36.42 34.80 38.07 37.99 41.26 40.63 43.90 45.39 48.66 49.92 53.19

132MB 18.58 9.25 6.77 11.34 7.87 34.57 37.83 36.22 39.49 39.41 42.68 42.05 45.31 46.81 50.08 51.34 54.61

160M 17.91 10.75 11.10 12.72 13.78 34.21 37.48 36.73 40.00 40.12 43.39 42.76 46.02 45.87 49.13 50.39 53.66

160L 19.69 10.75 11.10 12.72 13.78 35.98 39.25 38.50 41.77 41.89 45.16 44.53 47.80 47.64 50.91 52.17 55.43

180M 21.93 15.04 12.09 - 13.78 - - - - 44.13 - 46.77 - 49.88 - 54.41 -

180L 23.43 15.04 12.09 - 13.78 - - - - 45.63 - 48.27 - 51.38 - 55.91 -

200L 25.91 16.54 14.65 - 15.75 - - - - 48.11 - 50.75 - 53.86 - 58.39 -

225S 26.42 18.03 16.81 - 17.72 - - - - 49.69 - 52.32 - 55.43 - 59.96 -

225M 27.40 18.03 16.81 - 17.72 - - - - 50.67 - 53.31 - 56.42 - 60.94 -

250M 30.35 20.08 19.29 - 21.65 - - - - 0.00 - 0.00 - 66.14 - 70.67 -

280S 32.95 22.68 20.47 - 21.65 - - - - 0.00 - 0.00 - 68.74 - 73.27 -

280M 34.96 22.68 20.47 - 21.65 - - - - 0.00 - 0.00 - 70.75 - 75.28 -


Ko* g g2 g6

M0722

g1**

M0822 M0921 M1021

K* Kb*

M1321

K*

M1421

Kb* K* Kb* K* Kb* K* Kb* K* Kb*

ALL SIZES OF NEMA MOTOR

Ko* g g2 g6

M0122

g1**

M0222 M0322 M0422

K* Kb*

M0522

K*

M0622


56C 12.00 7.19 5.00 - 6.50 21.45 - 22.67 - 22.67 - 24.13 - 24.52 - 25.35 -143-145TC 12.00 7.19 5.25 - 6.50 21.45 - 22.67 - 22.67 - 24.13 - 24.52 - 25.35 -182-184TC 15.50 8.50 5.88 - 9.00 24.20 - 25.42 - 25.42 - 28.61 - 29.00 - 29.83 -213-215TC 16.50 10.19 7.38 - 9.00 - - - - - - 29.61 - 30.00 - 30.83 -254-256TC 20.00 12.50 9.63 - 10.00 - - - - - - - - - - - -284-286TC 23.25 15.56 13.13 - 11.25 - - - - - - - - - - - -324-326TC 25.25 16.94 14.13 - 13.38 - - - - - - - - - - - -364-365TC 27.00 19.00 15.13 - 13.38 - - - - - - - - - - - -404-405TC 30.00 20.63 18.00 - 13.38 - - - - - - - - - - - -


Ko* g g2 g6

M0722

g1**

M0822 M0921 M1021

K* Kb*

M1321

K*

M1421


56C 12.00 7.19 5.00 - 6.50 26.84 - 29.68 - - - - - - - - -143-145TC 12.00 7.19 5.25 - 6.50 26.84 - 29.68 - - - - - - - - -182-184TC 15.50 8.50 5.88 - 9.00 30.70 - 33.18 - 36.33 - 39.48 - 43.96 - 48.49 -213-215TC 16.50 10.19 7.38 - 9.00 31.70 - 34.18 - 37.33 - 40.48 - 44.96 - 49.49 -254-256TC 20.00 12.50 9.63 - 10.00 35.12 - 37.68 - 42.20 - 45.16 - 48.46 - 52.99 -284-286TC 23.25 15.56 13.13 - 11.25 - - - - 45.57 - 48.53 - 51.83 - 56.36 -324-326TC 25.25 16.94 14.13 - 13.38 - - - - 48.20 - 51.16 - 54.46 - 58.99 -364-365TC 27.00 19.00 15.13 - 13.38 - - - - - - - - 62.91 - 67.43 -404-405TC 30.00 20.63 18.00 - 13.38 - - - - - - - - 67.28 - 71.81 -

0205

74





t

g2

u

Low Speed Shaft

s

c

nb

f

h

o1

o

g1

g

h1 g6

a

e

i

LL12

d

TappedHole w

p3p

ko

k

kb

0311

75

DIMENSIONS - TRIPLE REDUCTIONBASE MOUNT

aSIZE b ec f h1h n o o1 p p3 sL utL12 w

iLow Speed Shaft

d

M0132

M0232

M0332

M0432

M0532

M0632

M0732

M0832

M0931

M1031

M1331

M1431


1.97 deep1 UNF x

1.97 deep

4.33 4.33 0.47 5.16 5.31 2.95 - 2.28 0.98 5.98 2.99 - 5.87 0.39 0.75 1.575 19/32 0.829 3/16

5.12 4.33 0.63 5.98 5.71 3.54 - 2.95 1.38 6.69 3.31 - 7.09 0.39 1.0 1.969 19/16 1.106 1/4

5.12 4.33 0.63 5.98 5.71 3.54 - 2.95 1.38 6.69 3.31 - 7.09 0.39 1.0 1.969 19/16 1.106 1/4

6.50 5.31 0.79 7.87 7.48 4.53 - 3.54 2.17 8.03 3.82 - 8.19 0.59 1.25 2.362 2 1.359 1/4

6.50 5.31 0.79 7.87 7.48 4.53 - 3.94 2.17 8.03 3.82 - 8.19 0.59 1.375 2.756 23/8 1.507 5/16

7.68 5.91 0.94 9.25 8.27 5.12 0.57 3.94 2.36 8.66 4.33 9.69 8.43 0.59 1.375 2.756 23/8 1.507 5/16

8.07 6.69 0.98 9.65 9.06 5.51 - 4.53 2.36 9.92 4.69 11.61 9.84 0.75 1.625 3.15 23/8 1.784 3/8

10.24 8.46 1.38 12.20 11.42 7.09 - 5.51 2.95 12.60 6.57 14.17 12.20 0.75 2.125 3.937 23/4 2.338 1/2

12.20 9.84 1.57 14.37 13.39 8.86 - 6.30 3.54 14.65 7.87 17.05 15.51 0.91 2.375 4.72 311/16 2.65 0.625

14.57 11.42 1.77 17.32 15.75 9.84 - 7.28 4.33 16.85 8.86 19.88 17.56 1.06 2.875 5.51 45/8 3.20 0.75

16.14 13.39 1.97 19.29 17.72 10.43 - 8.66 4.33 18.50 9.53 22.17 19.02 1.34 3.625 6.69 515/16 4.01 0.875

19.69 14.96 1.97 23.23 20.87 11.81 - 10.24 5.91 21.50 10.94 24.80 21.69 1.61 4.00 8.27 71/2 4.44 1.00


Ko* g g2 g6

M0132

g1**

M0232 M0332 M0432

K* Kb*

M0532

K*

M0632

Kb* K* Kb* K* Kb* K* Kb* K* Kb*63 8.58 4.80 3.78 6.30 5.51 17.40 13.62 18.54 14.76 18.54 14.76 20.39 16.61 20.79 17.01 21.61 17.8371 8.70 5.43 4.02 6.57 4.13 17.68 14.41 18.82 15.55 18.82 15.55 20.67 17.40 21.06 17.80 21.89 18.6280A 9.41 6.18 4.92 7.48 4.72 18.90 15.67 20.04 16.81 20.04 16.81 21.89 18.66 22.28 19.06 23.11 19.8880B 9.76 6.18 4.92 7.48 4.72 19.25 15.67 20.39 16.81 20.39 16.81 22.24 18.66 22.64 19.06 23.46 19.8890S 10.24 6.97 5.24 8.58 5.51 20.12 16.85 21.26 17.99 21.26 17.99 23.11 19.84 23.50 20.24 24.33 21.0690L 10.83 6.97 5.24 8.58 5.51 20.71 16.85 21.85 17.99 21.85 17.99 23.70 19.84 24.09 20.24 24.92 21.0690LA 11.18 6.97 5.24 8.58 5.51 21.06 16.85 22.20 17.99 22.20 17.99 24.06 19.84 24.45 20.24 25.28 21.06100L 12.20 7.76 5.67 9.37 6.30 21.65 17.20 22.80 18.35 22.80 18.35 24.65 20.20 25.04 20.59 25.87 21.42112M 12.80 8.62 6.10 9.37 6.30 22.24 18.07 23.39 19.21 23.39 19.21 25.24 21.06 25.63 21.46 26.46 22.28112MA 13.54 8.62 6.10 9.37 6.30 22.99 18.07 24.13 19.21 24.13 19.21 25.98 21.06 26.38 21.46 27.20 22.28132SA 15.43 9.25 6.77 11.34 7.87 - - - - - - - - - - - -132M 16.22 9.25 6.77 11.34 7.87 - - - - - - - - - - - -132MA 17.17 9.25 6.77 11.34 7.87 - - - - - - - - - - - -132MB 18.58 9.25 6.77 11.34 7.87 - - - - - - - - - - - -160M 17.91 10.75 11.10 12.72 13.78 - - - - - - - - - - - -160L 19.69 10.75 11.10 12.72 13.78 - - - - - - - - - - - -180M 21.93 15.04 12.09 - 13.78 - - - - - - - - - - - -180L 23.43 15.04 12.09 - 13.78 - - - - - - - - - - - -200L 25.91 16.54 14.65 - 15.75 - - - - - - - - - - - -225S 26.42 18.03 16.81 - 17.72 - - - - - - - - - - - -225M 27.40 18.03 16.81 - 17.72 - - - - - - - - - - - -250M 30.35 20.08 19.29 - 21.65 - - - - - - - - - - - -280S 32.95 22.68 20.47 - 21.65 - - - - - - - - - - - -280M 34.96 22.68 20.47 - 21.65 - - - - - - - - - - - -


Ko* g g2 g6

M0132

g1**

M0232 M0332 M0432

K* Kb*

M0532

K*

M0632


56C 12.00 7.19 5.00 - 6.50 22.04 - 23.18 - 23.18 - 25.03 - 25.43 - 26.25 -143-145TC 12.00 7.19 5.25 - 6.50 22.04 - 23.18 - 23.18 - 25.03 - 25.43 - 26.25 -182-184TC 15.50 8.50 5.88 - 9.00 24.79 - 25.93 - 25.93 - 27.78 - 28.18 - 29.00 -213-215TC 16.50 10.19 7.38 - 9.00 - - - - - - - - - - - -254-256TC 20.00 12.50 9.63 - 10.00 - - - - - - - - - - - -284-286TC 23.25 15.56 13.13 - 11.25 - - - - - - - - - - - -324-326TC 25.25 16.94 14.13 - 13.38 - - - - - - - - - - - -364-365TC 27.00 19.00 15.13 - 13.38 - - - - - - - - - - - -404-405TC 30.00 20.63 18.00 - 13.38 - - - - - - - - - - - -


Ko* g g2 g6

M0732

g1**

M0832 M0931 M1031

K* Kb*

M1331

K*

M1431


56C 12.00 7.19 5.00 - 6.50 27.39 - 30.78 - - - - - - - - -143-145TC 12.00 7.19 5.25 - 6.50 27.39 - 30.78 - - - - - - - - -182-184TC 15.50 8.50 5.88 - 9.00 31.88 - 34.63 - 19.48 - 19.59 - 21.96 - 21.52 -213-215TC 16.50 10.19 7.38 - 9.00 32.88 - 35.63 - 20.48 - 20.59 - 22.96 - 22.52 -254-256TC 20.00 12.50 9.63 - 10.00 - - 39.06 - 25.35 - 25.47 - 26.46 - 26.02 -284-286TC 23.25 15.56 13.13 - 11.25 - - - - 28.72 - 28.84 - 29.82 - 29.39 -324-326TC 25.25 16.94 14.13 - 13.38 - - - - 31.35 - 31.47 - 32.45 - 32.02 -364-365TC 27.00 19.00 15.13 - 13.38 - - - - - - - - 40.90 - 40.46 -404-405TC 30.00 20.63 18.00 - 13.38 - - - - - - - - 45.28 - 44.84 -


Ko* g g2 g6

M0732

g1**

M0832 M0931 M1031

K* Kb*

M1331

K*

M1431

Kb* K* Kb* K* Kb* K* Kb* K* Kb*63 8.58 4.80 3.78 6.30 5.51 - - - - - - - - - - - -71 8.70 5.43 4.02 6.57 4.13 - - - - - - - - - - - -80A 9.41 6.18 4.92 7.48 4.72 24.25 21.02 27.60 24.37 12.72 9.49 13.27 10.04 - - - -80B 9.76 6.18 4.92 7.48 4.72 24.61 21.02 27.95 24.37 13.07 9.49 13.62 10.04 - - - -90S 10.24 6.97 5.24 8.58 5.51 25.47 22.20 28.82 25.55 13.54 10.28 14.09 10.83 - - - -90L 10.83 6.97 5.24 8.58 5.51 26.06 22.20 29.41 25.55 14.13 10.28 14.69 10.83 - - - -90LA 11.18 6.97 5.24 8.58 5.51 26.42 22.20 29.76 25.55 14.49 10.28 15.04 10.83 - - - -100L 12.20 7.76 5.67 9.37 6.30 28.50 24.06 31.22 26.77 15.75 11.30 16.30 11.85 18.43 13.98 17.99 13.54112M 12.80 8.62 6.10 9.37 6.30 29.09 24.92 31.81 27.64 16.34 12.17 16.89 12.72 19.02 14.84 18.58 14.41112MA 13.54 8.62 6.10 9.37 6.30 29.84 24.92 32.56 27.64 17.09 12.17 17.64 12.72 19.76 14.84 19.33 14.41132SA 15.43 9.25 6.77 11.34 7.87 31.69 25.51 35.35 29.17 - - 19.53 13.35 21.65 15.47 21.22 15.04132M 16.22 9.25 6.77 11.34 7.87 32.48 25.51 36.14 29.17 - - 20.31 13.35 22.44 15.47 22.01 15.04132MA 17.17 9.25 6.77 11.34 7.87 33.43 25.51 37.09 29.17 - - 21.26 13.35 23.39 15.47 22.95 15.04132MB 18.58 9.25 6.77 11.34 7.87 34.84 25.51 38.50 29.17 - - 22.68 13.35 24.80 15.47 24.37 15.04160M 17.91 10.75 11.10 12.72 13.78 - - 38.15 30.98 - - 23.39 16.22 23.86 16.69 23.43 16.26160L 19.69 10.75 11.10 12.72 13.78 - - 39.92 30.98 - - 25.16 16.22 25.63 16.69 25.20 16.26180M 21.93 15.04 12.09 - 13.78 - - - - - - 27.40 - 27.87 - 27.44 -180L 23.43 15.04 12.09 - 13.78 - - - - - - 28.90 - 29.37 - 28.94 -200L 25.91 16.54 14.65 - 15.75 - - - - - - 31.38 - 31.85 - 31.42 -225S 26.42 18.03 16.81 - 17.72 - - - - - - 32.95 - 33.43 - 32.99 -225M 27.40 18.03 16.81 - 17.72 - - - - - - 33.94 - 34.41 - 33.98 -250M 30.35 20.08 19.29 - 21.65 - - - - - - - - 44.13 - 43.70 -280S 32.95 22.68 20.47 - 21.65 - - - - - - - - 46.73 - 46.30 -280M 34.96 22.68 20.47 - 21.65 - - - - - - - - 48.74 - 48.31 -




0311

76


t

u

Low Speed Shaft

s

c

nb

f

h

o1

o

g1

h1

a

e

i

L

L12

d

TappedHole w

p3p g2g

g6

v2v3

ko

k

kb

0311

77

DIMENSIONS - QUADRUPLE REDUCTIONBASE MOUNT

5.12 4.33 0.63 5.98 5.71 3.54 - 2.95 1.38 6.69 3.31 - 7.09 0.39 2.99 - 1.0 1.969 19/16 1.106 1/4

6.50 5.31 0.79 7.87 7.48 4.53 - 3.54 2.17 8.03 3.82 - 8.19 0.59 3.58 - 1.25 2.362 2 1.359 1/4

6.50 5.31 0.79 7.87 7.48 4.53 - 3.94 2.17 8.03 3.82 - 8.19 0.59 3.58 - 1.375 2.756 23/8 1.507 5/16

7.68 5.91 0.94 9.25 8.27 5.12 0.57 3.94 2.36 8.66 4.33 9.69 8.43 0.59 3.58 - 1.375 2.756 23/8 1.507 5/16

8.07 6.69 0.98 9.65 9.06 5.51 - 4.53 2.36 9.92 4.69 11.61 9.84 0.75 3.58 - 1.625 3.15 23/8 1.784 3/8

10.24 8.46 1.38 12.20 11.42 7.09 - 5.51 2.95 12.60 6.57 14.17 12.20 0.75 4.53 - 2.125 3.937 23/4 2.338 1/2

12.20 9.84 1.57 14.37 13.39 8.86 - 6.30 3.54 14.65 7.87 17.05 15.51 0.91 4.53 - 2.375 4.72 311/16 2.65 0.625

14.57 11.42 1.77 17.32 15.75 9.84 - 7.28 4.33 16.85 8.86 19.88 17.56 1.06 5.51 6.1 2.875 5.51 45/8 3.20 0.75

16.14 13.39 1.97 19.29 17.72 10.43 - 8.66 4.33 18.50 9.53 22.17 19.02 1.34 5.51 6.1 3.625 6.69 515/16 4.01 0.875

19.69 14.96 1.97 23.23 20.87 11.81 - 10.24 5.91 21.50 10.94 24.80 21.69 1.61 5.51 6.1 4.00 8.27 71/2 4.44 1.00

aSIZE b ec f ih1h n o o1 p p3 sd L utL12 w

v2 v3Low Speed Shaft

1/4 UNF x

0.71 deep3/8 UNF x

0.86 deep3/8 UNF x

0.75 deep3/8 UNF x

0.75 deep5/8 UNF x

1.25 deep3/4 UNF x

1.50 deep3/4 UNF x

1.65 deep3/4 UNF x

1.65 deep

1 UNF x

1.97 deep

1 UNF x

1.97 deep

M0342

M0442

M0542

M0642

M0742

M0842

M0941

M1041

M1341

M1441


Ko* g g2 g6g1**

M0941 M1041 M1341

K* Kb*

M1441

K* Kb* K* Kb* Kb*K* K* Kb*

63 8.58 4.80 3.78 6.30 5.51 34.49 36.26 37.68 39.45 41.69 43.46 46.46 48.23 50.98 52.7671 8.70 5.43 4.02 6.57 4.13 34.84 36.57 38.03 39.76 41.81 43.54 46.57 48.31 51.10 52.8380A 9.41 6.18 4.92 7.48 4.72 36.26 38.31 39.45 41.50 43.98 46.02 48.74 50.79 53.27 55.3180B 9.76 6.18 4.92 7.48 4.72 36.61 38.66 39.80 41.85 44.33 46.38 49.09 51.14 53.62 55.6790S 10.24 6.97 5.24 8.58 5.51 37.48 39.53 40.67 42.72 45.20 47.24 49.96 52.01 54.49 56.5490L 10.83 6.97 5.24 8.58 5.51 38.07 40.12 41.26 43.31 45.79 47.83 50.55 52.60 55.08 57.1390LA 11.18 6.97 5.24 8.58 5.51 38.43 40.47 41.61 43.66 46.14 48.19 50.91 52.95 55.43 57.48100L 12.20 7.76 5.67 9.37 6.30 40.51 42.87 43.70 46.06 47.60 49.96 52.36 54.72 56.89 59.25112M 12.80 8.62 6.10 9.37 6.30 41.10 44.02 44.29 47.20 48.19 51.10 52.95 55.87 57.48 60.39112MA 13.54 8.62 6.10 9.37 6.30 41.85 44.80 45.04 47.99 48.94 51.89 53.70 56.65 58.23 61.18132SA 15.43 9.25 6.77 11.34 7.87 43.70 46.97 46.89 50.16 51.73 55.00 56.50 59.76 61.02 64.29132M 16.22 9.25 6.77 11.34 7.87 44.49 47.76 47.68 50.94 52.52 55.79 57.28 60.55 61.81 65.08132MA 17.17 9.25 6.77 11.34 7.87 45.43 48.70 48.62 51.89 53.46 56.73 58.23 61.50 62.76 66.02132MB 18.58 9.25 6.77 11.34 7.87 46.85 50.12 50.04 53.31 54.88 58.15 59.65 62.91 64.17 67.44160M 17.91 10.75 11.10 12.72 13.78 - - - - 54.53 57.80 59.29 62.56 63.82 67.09160L 19.69 10.75 11.10 12.72 13.78 - - - - 56.30 59.57 61.06 64.33 65.59 68.86

M0842


Ko* g g2 g6

M0342

g1**

M0442 M0542 M0642

K* Kb*

M0742


56C 12.00 7.19 5.00 - 6.50 29.99 - 32.67 - 33.06 - 33.89 - 35.35 -143-145TC 12.00 7.19 5.25 - 6.50 32.67 - 32.67 - 33.06 - 33.89 - 35.35 -182-184TC 15.50 8.50 5.88 - 9.00 - - - - - - - - - -213-215TC 16.50 10.19 7.38 - 9.00 - - - - - - - - - -


Ko* g g2 g6

M0842

g1**

M0941 M1041 M1341

K* Kb*

M1441


56C 12.00 7.19 5.00 - 6.50 39.40 - 42.59 - 47.16 - 51.92 - 56.45 -143-145TC 12.00 7.19 5.25 - 6.50 39.40 - 42.59 - 47.16 - 51.92 - 56.45 -182-184TC 15.50 8.50 5.88 - 9.00 43.89 - 47.07 - 51.01 - 55.78 - 60.30 -213-215TC 16.50 10.19 7.38 - 9.00 - - - - 52.01 - 56.78 - 61.30 -


Ko* g g2 g6

M0342

g1**

M0442 M0542 M0642

K* Kb*

M0742

K* Kb* K* Kb* Kb*K* K* Kb*63 8.58 4.80 3.78 6.30 5.51 25.35 27.13 28.03 29.80 28.43 30.20 29.25 31.02 30.71 32.4871 8.70 5.43 4.02 6.57 4.13 25.63 27.36 28.31 30.04 28.70 30.43 29.53 31.26 30.98 32.7280A 9.41 6.18 4.92 7.48 4.72 26.85 28.90 29.53 31.57 29.92 31.97 30.75 32.80 32.20 34.2580B 9.76 6.18 4.92 7.48 4.72 27.20 29.25 29.88 31.93 30.28 32.32 31.10 33.15 32.56 34.6190S 10.24 6.97 5.24 8.58 5.51 28.07 30.12 30.75 32.80 31.14 33.19 31.97 34.02 33.43 35.4790L 10.83 6.97 5.24 8.58 5.51 28.66 30.71 31.34 33.39 31.73 33.78 32.56 34.61 34.02 36.0690LA 11.18 6.97 5.24 8.58 5.51 29.02 31.06 31.69 33.74 32.09 34.13 32.91 34.96 34.37 36.42100L 12.20 7.76 5.67 9.37 6.30 29.61 31.97 32.28 34.65 32.68 35.04 33.50 35.87 34.96 37.32112M 12.80 8.62 6.10 9.37 6.30 30.20 33.11 32.87 35.79 33.27 36.18 34.09 37.01 35.55 38.46112MA 13.54 8.62 6.10 9.37 6.30 30.94 33.90 33.62 36.57 34.02 36.97 34.84 37.80 36.30 39.25132SA 15.43 9.25 6.77 11.34 7.87 - - - - - - - - - -132M 16.22 9.25 6.77 11.34 7.87 - - - - - - - - - -132MA 17.17 9.25 6.77 11.34 7.87 - - - - - - - - - -132MB 18.58 9.25 6.77 11.34 7.87 - - - - - - - - - -160M 17.91 10.75 11.10 12.72 13.78 - - - - - - - - - -160L 19.69 10.75 11.10 12.72 13.78 - - - - - - - - - -




0311

78


t

uLow Speed Shaft

s

c

nb

f

h

o1

o

g1

h1

a

e

i

L

L12

d

TappedHole w

p3p g2g

g6

v2v3

ko

k

kb

0206

79

DIMENSIONS - QUINTUPLE REDUCTIONBASE MOUNT

*Motor Lengths for TPT standard motors, These lengths may vary if alternative motor is fitted.** Dimension over terminal box from centreline.

w

1/4 UNF x

0.71 deep3/8 UNF x

0.86 deep3/8 UNF x

0.75 deep3/8 UNF x

0.75 deep5/8 UNF x

1.25 deep3/4 UNF x

1.50 deep3/4 UNF x

1.65 deep3/4 UNF x

1.65 deep

1 UNF x

1.97 deep

1 UNF x

1.97 deep

5.12 4.33 0.63 5.98 5.71 3.54 - 2.95 1.38 6.69 3.31 - 7.09 0.39 2.99 - 1.0 1.969 19/16 1.106 1/4

6.50 5.31 0.79 7.87 7.48 4.53 - 3.54 2.17 8.03 3.82 - 8.19 0.59 3.58 - 1.25 2.362 2 1.359 1/4

6.50 5.31 0.79 7.87 7.48 4.53 - 3.94 2.17 8.03 3.82 - 8.19 0.59 3.58 - 1.375 2.756 23/8 1.507 5/16

7.68 5.91 0.94 9.25 8.27 5.12 0.57 3.94 2.36 8.66 4.33 9.69 8.43 0.59 3.58 - 1.375 2.756 23/8 1.507 5/16

8.07 6.69 0.98 9.65 9.06 5.51 - 4.53 2.36 9.92 4.69 11.61 9.84 0.75 3.58 - 1.625 3.15 23/8 1.784 3/8

10.24 8.46 1.38 12.20 11.42 7.09 - 5.51 2.95 12.60 6.57 14.17 12.20 0.75 4.53 - 2.125 3.937 23/4 2.338 1/2

12.20 9.84 1.57 14.37 13.39 8.86 - 6.30 3.54 14.65 7.87 17.05 15.51 0.91 4.53 - 2.375 4.72 311/16 2.65 0.625

14.57 11.42 1.77 17.32 15.75 9.84 - 7.28 4.33 16.85 8.86 19.88 17.56 1.06 5.51 6.1 2.875 5.51 45/8 3.20 0.75

16.14 13.39 1.97 19.29 17.72 10.43 - 8.66 4.33 18.50 9.53 22.17 19.02 1.34 5.51 6.1 3.625 6.69 515/16 4.01 0.875

19.69 14.96 1.97 23.23 20.87 11.81 - 10.24 5.91 21.50 10.94 24.80 21.69 1.61 5.51 6.1 4.00 8.27 71/2 4.44 1.00

aSIZE b ec f ih1h n o o1 p p3 sd L utL12

v2 v3Low Speed Shaft

M0352

M0452

M0552

M0652

M0752

M0852

M0951

M1051

M1351

M1451

ALL SIZES OF NEMA MOTOR M0352 M0452 M0552 M0652 M0752

Ko* g g1** g2 g6 K* Kb* K* Kb* K* Kb* K* Kb* K* Kb*

56C 12.00 7.19 5.00 - 6.50 30.58 - 33.18 - 33.57 - 34.40 - 35.86 -

143-145TC 12.00 7.19 5.25 - 6.50 33.18 - 33.18 - 33.57 - 34.40 - 35.86 -

182-184TC 15.50 8.50 5.88 - 9.00 - - - - - - - - - -


63 8.58 4.80 3.78 6.30 5.51 25.94 27.72 28.54 30.31 28.94 30.71 29.76 31.54 31.22 32.99

71 8.70 5.43 4.02 6.57 4.13 26.22 27.95 28.82 30.55 29.21 30.94 30.04 31.77 31.50 33.23

80A 9.41 6.18 4.92 7.48 4.72 27.44 29.49 30.04 32.09 30.43 32.48 31.26 33.31 32.72 34.76

80B 9.76 6.18 4.92 7.48 4.72 27.80 29.84 30.39 32.44 30.79 32.83 31.61 33.66 33.07 35.12

90S 10.24 6.97 5.24 8.58 5.51 28.66 30.71 31.26 33.31 31.65 33.70 32.48 34.53 33.94 35.98

90L 10.83 6.97 5.24 8.58 5.51 29.25 31.30 31.85 33.90 32.24 34.29 33.07 35.12 34.53 36.57

90LA 11.18 6.97 5.24 8.58 5.51 29.61 31.65 32.20 34.25 32.60 34.65 33.43 35.47 34.88 36.93

100L 12.20 7.76 5.67 9.37 6.30 30.20 32.56 32.80 35.16 33.19 35.55 34.02 36.38 35.47 37.83

112M 12.80 8.62 6.10 9.37 6.30 30.79 33.70 33.39 36.30 33.78 36.69 34.61 37.52 36.06 38.98

112MA 13.54 8.62 6.10 9.37 6.30 31.54 34.49 34.13 37.09 34.53 37.48 35.35 38.31 36.81 39.76

All Sizes M0352 M0452 M0652 M0752M0552MotorFrameSize


63 8.58 4.80 3.78 6.30 5.51 34.80 36.57 37.99 39.76 42.32 44.09 47.09 48.86 51.61 53.39

71 8.70 5.43 4.02 6.57 4.13 35.16 36.89 38.35 40.08 42.44 44.17 47.20 48.94 51.73 53.46

80A 9.41 6.18 4.92 7.48 4.72 36.57 38.62 39.76 41.81 44.61 46.65 49.37 51.42 53.90 55.94

80B 9.76 6.18 4.92 7.48 4.72 36.93 38.98 40.12 42.17 44.96 47.01 49.72 51.77 54.25 56.30

90S 10.24 6.97 5.24 8.58 5.51 37.80 39.84 40.98 43.03 45.83 47.87 50.59 52.64 55.12 57.17

90L 10.83 6.97 5.24 8.58 5.51 38.39 40.43 41.57 43.62 46.42 48.46 51.18 53.23 55.71 57.76

90LA 11.18 6.97 5.24 8.58 5.51 38.74 40.79 41.93 43.98 46.77 48.82 51.54 53.58 56.06 58.11

100L 12.20 7.76 5.67 9.37 6.30 40.83 43.19 44.02 46.38 48.23 50.59 52.99 55.35 57.52 59.88

112M 12.80 8.62 6.10 9.37 6.30 41.42 44.33 44.61 47.52 48.82 51.73 53.58 56.50 58.11 61.02

112MA 13.54 8.62 6.10 9.37 6.30 42.17 45.12 45.35 48.31 49.57 52.52 54.33 57.28 58.86 61.81




56C 12.00 7.19 5.00 - 6.50 39.72 - 42.91 - 47.79 - 52.55 - 57.08 -

143-145TC 12.00 7.19 5.25 - 6.50 39.72 - 42.91 - 47.79 - 52.55 - 57.08 -

182-184TC 15.50 8.50 5.88 - 9.00 44.20 - 47.39 - 51.64 - 56.41 - 60.93 -

0311

80





s

g1

øe1

p3 p

c1i2

f1

LL12

ød

øb

1

øa

1

h1

v1

TappedHole w

t

u

Low Speed Shaft

kb

k

ko

g g2

g6

0311

DIMENSIONS - SINGLE REDUCTIONFLANGE MOUNT

81

Note: Units are also available as C-Flange (B14)Mounting or Base and C-Flange (B14)Mounting, please see page 107 for details


63 8.58 4.80 3.78 6.30 5.51 16.73 18.50 16.77 18.54

71 8.70 5.43 4.02 6.57 4.13 17.01 18.74 17.13 18.86

80A 9.41 6.18 4.92 7.48 4.72 18.23 20.28 18.54 20.59

80B 9.76 6.18 4.92 7.48 4.72 18.58 20.63 18.90 20.94

90S 10.24 6.97 5.24 8.58 5.51 19.45 21.50 19.76 21.81

90L 10.83 6.97 5.24 8.58 5.51 20.04 22.09 20.35 22.40

90LA 11.18 6.97 5.24 8.58 5.51 20.39 22.44 20.71 22.76

100L 12.20 7.76 5.67 9.37 6.30 20.98 23.35 22.80 25.16

112M 12.80 8.62 6.10 9.37 6.30 21.57 24.49 23.39 26.30

112MA 13.54 8.62 6.10 9.37 6.30 22.32 25.28 24.13 27.09

132SA 15.43 9.25 6.77 11.34 7.87 - - 25.98 29.25

132M 16.22 9.25 6.77 11.34 7.87 - - 26.77 30.04

132MA 17.17 9.25 6.77 11.34 7.87 - - 27.72 30.98

132MB 18.58 9.25 6.77 11.34 7.87 - - 29.13 32.40

160M 17.91 10.75 11.10 12.72 13.78 - - - -

160L 19.69 10.75 11.10 12.72 13.78 - - - -


4.72 3.15 0.35 3.94 0.12 1.57 0.35

5.51 3.74 0.35 4.53 0.12 1.57 6.10 4.61 0.35 2.20

6.30 4.33 0.39 5.12 0.14 1.57 0.35

7.87 5.12 0.39 6.50 0.14 1.57 0.47

4.72 3.15 0.39 3.94 0.12 1.97 0.26

5.51 3.74 0.39 4.53 0.12 1.97 7.01 5.91 0.35 2.83

6.30 4.33 0.39 5.12 0.14 1.97 0.35

7.87 5.12 0.39 6.50 0.14 1.97 0.43

5.51 3.74 0.39 4.53 0.12 2.36 0.35

6.30 4.33 0.39 5.12 0.14 2.36 8.50 7.09 0.35 3.27

7.87 5.12 0.43 6.50 0.16 2.36 0.43

9.84 7.09 0.43 8.46 0.16 2.36 0.53

7.87 5.12 0.43 6.50 0.16 3.15 0.43

9.84 7.09 0.43 8.46 0.16 3.15 9.92 8.66 0.53 3.82

11.81 9.06 0.43 10.43 0.16 3.15 0.53

øa1SIZE øb1 øe1c1 f1 h1 p3 v1L utL12 w

i2Low Speed Shaft

dp s

M0512

M0612

M0712

M0812

1.85 0.75 1.575 19/32 0.829 3/161/4 UNF x

0.63 deep

2.36 1.00 1.969 19/16 1.106 1/41/4 UNF x

0.71 deep

2.91 1.25 2.362 2 1.359 1/41/4 UNF x

0.71 deep

3.82 1.625 3.150 23/8 1.784 3/85/8 UNF x

1.25 deep

0311


82


NEMA

56C

143-145TC

182-184TC

213-215TC

254-256TC


12.00 7.19 5.00 - 6.50 21.37 - 21.69 -

12.00 7.19 5.25 - 6.50 21.37 - 21.69 -

15.50 8.50 5.88 - 9.00 24.12 - 26.17 -

16.50 10.19 7.38 - 9.00 - - 27.17 -

20.00 12.50 9.63 - 10.00 - - - -


NEMA

56C

143-145TC

182-184TC

213-215TC

254-256TC


12.00 7.19 5.00 - 6.50 23.42 - 24.95 -

12.00 7.19 5.25 - 6.50 23.42 - 24.95 -

15.50 8.50 5.88 - 9.00 27.27 - 28.45 -

16.50 10.19 7.38 - 9.00 28.27 - 29.45 -

20.00 12.50 9.63 - 10.00 31.69 - 32.95 -


63 8.58 4.80 3.78 6.30 5.51 - - - -

71 8.70 5.43 4.02 6.57 4.13 - - - -

80A 9.41 6.18 4.92 7.48 4.72 20.24 22.28 22.09 24.13

80B 9.76 6.18 4.92 7.48 4.72 20.59 22.64 22.44 24.49

90S 10.24 6.97 5.24 8.58 5.51 21.46 23.50 22.91 24.96

90L 10.83 6.97 5.24 8.58 5.51 22.05 24.09 23.50 25.55

90LA 11.18 6.97 5.24 8.58 5.51 22.40 24.45 23.86 25.91

100L 12.20 7.76 5.67 9.37 6.30 23.86 26.22 25.12 27.48

112M 12.80 8.62 6.10 9.37 6.30 24.45 27.36 25.71 28.62

112MA 13.54 8.62 6.10 9.37 6.30 25.20 28.15 26.46 29.41

132SA 15.43 9.25 6.77 11.34 7.87 27.99 31.26 28.35 31.61

132M 16.22 9.25 6.77 11.34 7.87 28.78 32.05 29.13 32.40

132MA 17.17 9.25 6.77 11.34 7.87 29.72 32.99 30.08 33.35

132MB 18.58 9.25 6.77 11.34 7.87 31.14 34.41 31.50 34.76

160M 17.91 10.75 11.10 12.72 13.78 30.79 34.06 32.01 35.28

160L 19.69 10.75 11.10 12.72 13.78 32.56 35.83 33.78 37.05





t

g2

u

Low Speed Shaft

g

h1

p3p

p5

g6

f1

c1

i2

LL12

ød

TappedHole w

øb

1

øa

1

ko

k

kb

4 x øs

g1

øe1

g1

8 x øs

øe1

0311

83

DIMENSIONS - DOUBLE REDUCTIONFLANGE MOUNT

Note: Sizes 01 to 08 are also available as C-Flange (B14)Mounting, please see page 107 for details.

Sizes1, 2, 3, 4, 5, 6, 7 and 8

Sizes9, 10, 13 and 14


Ko* g g2 g6

M0122

g1**

M0222 M0322 M0422

K* Kb*

M0522

K*

M0622


63 8.58 4.80 3.78 6.30 5.51 16.81 18.58 18.03 19.80 18.03 19.80 19.21 20.98 19.61 21.38 20.43 22.2071 8.70 5.43 4.02 6.57 4.13 17.09 18.82 18.31 20.04 18.31 20.04 19.57 21.30 19.96 21.69 20.79 22.5280A 9.41 6.18 4.92 7.48 4.72 18.31 20.35 19.53 21.57 19.53 21.57 20.98 23.03 21.38 23.43 22.20 24.2580B 9.76 6.18 4.92 7.48 4.72 18.66 20.71 19.88 21.93 19.88 21.93 21.34 23.39 21.73 23.78 22.56 24.6190S 10.24 6.97 5.24 8.58 5.51 19.53 21.57 20.75 22.80 20.75 22.80 22.20 24.25 22.60 24.65 23.43 25.4790L 10.83 6.97 5.24 8.58 5.51 20.12 22.17 21.34 23.39 21.34 23.39 22.80 24.84 23.19 25.24 24.02 26.0690LA 11.18 6.97 5.24 8.58 5.51 20.47 22.52 21.69 23.74 21.69 23.74 23.15 25.20 23.54 25.59 24.37 26.42100L 12.20 7.76 5.67 9.37 6.30 21.06 23.43 22.28 24.65 22.28 24.65 25.24 27.60 25.63 27.99 26.46 28.82112M 12.80 8.62 6.10 9.37 6.30 21.65 24.57 22.87 25.79 22.87 25.79 25.83 28.74 26.22 29.13 27.05 29.96112MA 13.54 8.62 6.10 9.37 6.30 22.40 25.35 23.62 26.57 23.62 26.57 26.57 29.53 26.97 29.92 27.80 30.75132SA 15.43 9.25 6.77 11.34 7.87 - - - - - - 28.43 31.69 28.82 32.09 29.65 32.91132M 16.22 9.25 6.77 11.34 7.87 - - - - - - 29.21 32.48 29.61 32.87 30.43 33.70132MA 17.17 9.25 6.77 11.34 7.87 - - - - - - 30.16 33.43 30.55 33.82 31.38 34.65132MB 18.58 9.25 6.77 11.34 7.87 - - - - - - - - - - - -160M 17.91 10.75 11.10 12.72 13.78 - - - - - - - - - - - -160L 19.69 10.75 11.10 12.72 13.78 - - - - - - - - - - - -180M 21.93 15.04 12.09 - 13.78 - - - - - - - - - - - -180L 23.43 15.04 12.09 - 13.78 - - - - - - - - - - - -200L 25.91 16.54 14.65 - 15.75 - - - - - - - - - - - -225S 26.42 18.03 16.81 - 17.72 - - - - - - - - - - - -225M 27.40 18.03 16.81 - 17.72 - - - - - - - - - - - -250M 30.35 20.08 19.29 - 21.65 - - - - - - - - - - - -280S 32.95 22.68 20.47 - 21.65 - - - - - - - - - - - -280M 34.96 22.68 20.47 - 21.65 - - - - - - - - - - - -

3/4 UNF x 1.50 deep

3/4 UNF x 1.65 deep

3/4 UNF x 1.65 deep

1 UNF x 1.97 deep

1 UNF x 1.97 deep

2.375 4.72 311/16 2.65 0.625

2.875 5.51 45/8 3.20 0.75

3.625 6.69 515/16 4.01 0.875

4.00 8.27 71/2 4.44 1.00

M0921

M1021

M1321

M1421

0.75 1.575 19/32 0.829 3/16

1.0 1.969 19/16 1.106 1/4

1.0 1.969 19/16 1.106 1/4

1.25 2.362 2 1.359 1/4

1.375 2.756 23/8 1.507 5/16

1.375 2.756 23/8 1.507 5/16

1.625 3.15 23/8 1.784 3/8

2.125 3.937 23/4 2.338 1/2

1/4 UNF x 0.63 deep

1/4 UNF x 0.71 deep

1/4 UNF x 0.71 deep

3/8 UNF x 0.86 deep

3/8 UNF x 0.75 deep

3/8 UNF x 0.75 deep

5/8 UNF x 1.25 deep

M0122

M0222

M0322

M0422

M0522

M0622

M0722

M0822

øa1SIZE øb1 øe1c1 f1 h1 p3L utL12 w

i2Low Speed Shaft

dp sp5

- - 2.91 2.99

- - 3.54 3.58

- - 3.54 3.58

- - 3.66 4.53

- - 3.66 4.53

0.57 4.57 3.31 5.12

- 6.10 4.33 5.51

- 7.09 5.12 7.17

4.72 3.15 0.35 3.94 0.12 1.57 0.355.51 3.74 0.35 4.53 0.12 1.57 0.356.30 4.33 0.39 5.12 0.14 1.57 0.357.87 5.12 0.39 6.50 0.14 1.57 0.434.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.434.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.435.51 3.74 0.43 4.53 0.12 2.36 0.356.30 4.33 0.43 5.12 0.14 2.36 0.357.87 5.12 0.43 6.50 0.14 2.36 0.439.84 7.09 0.43 8.46 0.16 2.36 0.535.51 3.74 0.43 4.53 0.12 2.76 0.356.30 4.33 0.43 5.12 0.14 2.76 0.357.87 5.12 0.43 6.50 0.14 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.537.87 5.12 0.43 6.50 0.16 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.5311.81 9.06 0.43 10.43 0.16 2.76 0.537.87 5.12 0.43 6.50 0.14 3.15 0.439.84 7.09 0.43 8.46 0.16 3.15 0.5311.81 9.06 0.43 10.43 0.16 3.15 0.5311.81 9.06 0.67 10.43 0.16 3.94 0.5313.78 9.84 0.67 11.81 0.20 3.94 0.6917.72 13.78 0.71 15.75 0.20 - 5.51 7.80 - 9.06 0.71

17.72 13.78 0.87 15.75 0.20 - 5.51 9.65 - 10.24 0.71

21.65 17.72 0.98 19.69 0.20 - 6.69 11.34 - 10.94 0.71

21.65 17.72 0.98 19.69 0.20 - 8.27 12.60 - 12.52 0.71

63 8.58 4.80 3.78 6.30 5.51 - - - - - - - - - - - -71 8.70 5.43 4.02 6.57 4.13 - - - - - - - - - - - -80A 9.41 6.18 4.92 7.48 4.72 23.66 25.71 26.81 28.86 30.00 32.05 - - - - - -80B 9.76 6.18 4.92 7.48 4.72 24.02 26.06 27.17 29.21 30.35 32.40 - - - - - -90S 10.24 6.97 5.24 8.58 5.51 24.88 26.93 27.64 29.69 30.83 32.87 - - - - - -90L 10.83 6.97 5.24 8.58 5.51 25.47 27.52 28.23 30.28 31.42 33.46 - - - - - -90LA 11.18 6.97 5.24 8.58 5.51 25.83 27.87 28.58 30.63 31.77 33.82 - - - - - -100L 12.20 7.76 5.67 9.37 6.30 27.28 29.65 29.84 32.20 33.03 35.39 35.67 38.03 40.43 42.80 44.96 47.32112M 12.80 8.62 6.10 9.37 6.30 27.87 30.79 30.43 33.35 33.62 36.54 36.26 39.17 41.02 43.94 45.55 48.46112MA 13.54 8.62 6.10 9.37 6.30 28.62 31.57 31.18 34.13 34.37 37.32 37.01 39.96 41.77 44.72 46.30 49.25132SA 15.43 9.25 6.77 11.34 7.87 31.42 34.69 33.07 36.34 36.26 39.53 38.90 42.17 43.66 46.93 48.19 51.46132M 16.22 9.25 6.77 11.34 7.87 32.20 35.47 33.86 37.13 37.05 40.31 39.69 42.95 44.45 47.72 48.98 52.24132MA 17.17 9.25 6.77 11.34 7.87 33.15 36.42 34.80 38.07 37.99 41.26 40.63 43.90 45.39 48.66 49.92 53.19132MB 18.58 9.25 6.77 11.34 7.87 34.57 37.83 36.22 39.49 39.41 42.68 42.05 45.31 46.81 50.08 51.34 54.61160M 17.91 10.75 11.10 12.72 13.78 34.21 37.48 36.73 40.00 40.12 43.39 42.76 46.02 45.87 49.13 50.39 53.66160L 19.69 10.75 11.10 12.72 13.78 35.98 39.25 38.50 41.77 41.89 45.16 44.53 47.80 47.64 50.91 52.17 55.43180M 21.93 15.04 12.09 - 13.78 - - - - 44.13 - 46.77 - 49.88 - 54.41 -180L 23.43 15.04 12.09 - 13.78 - - - - 45.63 - 48.27 - 51.38 - 55.91 -200L 25.91 16.54 14.65 - 15.75 - - - - 48.11 - 50.75 - 53.86 - 58.39 -225S 26.42 18.03 16.81 - 17.72 - - - - 49.69 - 52.32 - 55.43 - 59.96 -225M 27.40 18.03 16.81 - 17.72 - - - - 50.67 - 53.31 - 56.42 - 60.94 -250M 30.35 20.08 19.29 - 21.65 - - - - 0.00 - 0.00 - 66.14 - 70.67 -280S 32.95 22.68 20.47 - 21.65 - - - - 0.00 - 0.00 - 68.74 - 73.27 -280M 34.96 22.68 20.47 - 21.65 - - - - 0.00 - 0.00 - 70.75 - 75.28 -


Ko* g g2 g6

M0722

g1**

M0822 M0921 M1021

K* Kb*

M1321

K*

M1421



Ko* g g2 g6

M0122

g1**

M0222 M0322 M0422

K* Kb*

M0522

K*

M0622


56C 12.00 7.19 5.00 - 6.50 21.45 - 22.67 - 22.67 - 24.13 - 24.52 - 25.35 -143-145TC 12.00 7.19 5.25 - 6.50 21.45 - 22.67 - 22.67 - 24.13 - 24.52 - 25.35 -182-184TC 15.50 8.50 5.88 - 9.00 24.20 - 25.42 - 25.42 - 28.61 - 29.00 - 29.83 -213-215TC 16.50 10.19 7.38 - 9.00 - - - - - - 29.61 - 30.00 - 30.83 -254-256TC 20.00 12.50 9.63 - 10.00 - - - - - - - - - - - -284-286TC 23.25 15.56 13.13 - 11.25 - - - - - - - - - - - -324-326TC 25.25 16.94 14.13 - 13.38 - - - - - - - - - - - -364-365TC 27.00 19.00 15.13 - 13.38 - - - - - - - - - - - -404-405TC 30.00 20.63 18.00 - 13.38 - - - - - - - - - - - -


Ko* g g2 g6

M0722

g1**

M0822 M0921 M1021

K* Kb*

M1321

K*

M1421


56C 12.00 7.19 5.00 - 6.50 26.84 - 29.68 - - - - - - - - -143-145TC 12.00 7.19 5.25 - 6.50 26.84 - 29.68 - - - - - - - - -182-184TC 15.50 8.50 5.88 - 9.00 30.70 - 33.18 - 36.33 - 39.48 - 43.96 - 48.49 -213-215TC 16.50 10.19 7.38 - 9.00 31.70 - 34.18 - 37.33 - 40.48 - 44.96 - 49.49 -254-256TC 20.00 12.50 9.63 - 10.00 35.12 - 37.68 - 42.20 - 45.16 - 48.46 - 52.99 -284-286TC 23.25 15.56 13.13 - 11.25 - - - - 45.57 - 48.53 - 51.83 - 56.36 -324-326TC 25.25 16.94 14.13 - 13.38 - - - - 48.20 - 51.16 - 54.46 - 58.99 -364-365TC 27.00 19.00 15.13 - 13.38 - - - - - - - - 62.91 - 67.43 -404-405TC 30.00 20.63 18.00 - 13.38 - - - - - - - - 67.28 - 71.81 -



**Dimension over terminal box from centreline

0311

84


t

g2

u

Low Speed Shaft

g

h1

p3p

p5

g6

f1

c1

i2

LL12

ød

TappedHole w

øb

1

øa

1

ko

k

kb

4 x øs

g1

øe1

g1

8 x øs

øe1

0311

85

DIMENSIONS - TRIPLE REDUCTIONFLANGE MOUNT

Sizes1, 2, 3, 4, 5, 6, 7 and 8

Sizes9, 10, 13 and 14

Note: Sizes 01 to 08 are also available as C-Flange (B14)Mounting, please see page 107 for details.

M0132

M0232

M0332

M0432

M0532

M0632

M0732

M0832

- - 2.91 2.99

- - 3.54 3.58

- - 3.54 3.58

- - 3.66 4.53

- - 3.66 4.53

0.57 4.57 3.31 5.12

- 6.10 4.33 5.51

- 7.09 5.12 7.17

2.375 4.72 311/16 2.65 0.625

2.875 5.51 45/8 3.20 0.75

3.625 6.69 515/16 4.01 0.875

4.00 8.27 71/2 4.44 1.00

1/4 UNF x 0.63 deep

1/4 UNF x 0.71 deep

1/4 UNF x 0.71 deep

3/8 UNF x 0.86 deep

3/8 UNF x 0.75 deep

3/8 UNF x 0.75 deep

5/8 UNF x 1.25 deep

3/4 UNF x 1.65 deep3/4 UNF x 1.65 deep

1 UNF x 1.97 deep

1 UNF x 1.97 deep

3/4 UNF x 1.50 deep

M0931

M1031

M1331

M1431


Ko* g g2 g6

M0132

g1**

M0232 M0332 M0432

K* Kb*

M0532

K*

M0632


63 8.58 4.80 3.78 6.30 5.51 17.40 13.62 18.54 14.76 18.54 14.76 20.39 16.61 20.79 17.01 21.61 17.8371 8.70 5.43 4.02 6.57 4.13 17.68 14.41 18.82 15.55 18.82 15.55 20.67 17.40 21.06 17.80 21.89 18.6280A 9.41 6.18 4.92 7.48 4.72 18.90 15.67 20.04 16.81 20.04 16.81 21.89 18.66 22.28 19.06 23.11 19.8880B 9.76 6.18 4.92 7.48 4.72 19.25 15.67 20.39 16.81 20.39 16.81 22.24 18.66 22.64 19.06 23.46 19.8890S 10.24 6.97 5.24 8.58 5.51 20.12 16.85 21.26 17.99 21.26 17.99 23.11 19.84 23.50 20.24 24.33 21.0690L 10.83 6.97 5.24 8.58 5.51 20.71 16.85 21.85 17.99 21.85 17.99 23.70 19.84 24.09 20.24 24.92 21.0690LA 11.18 6.97 5.24 8.58 5.51 21.06 16.85 22.20 17.99 22.20 17.99 24.06 19.84 24.45 20.24 25.28 21.06100L 12.20 7.76 5.67 9.37 6.30 21.65 17.20 22.80 18.35 22.80 18.35 24.65 20.20 25.04 20.59 25.87 21.42112M 12.80 8.62 6.10 9.37 6.30 22.24 18.07 23.39 19.21 23.39 19.21 25.24 21.06 25.63 21.46 26.46 22.28112MA 13.54 8.62 6.10 9.37 6.30 22.99 18.07 24.13 19.21 24.13 19.21 25.98 21.06 26.38 21.46 27.20 22.28132SA 15.43 9.25 6.77 11.34 7.87 - - - - - - - - - - - -132M 16.22 9.25 6.77 11.34 7.87 - - - - - - - - - - - -132MA 17.17 9.25 6.77 11.34 7.87 - - - - - - - - - - - -132MB 18.58 9.25 6.77 11.34 7.87 - - - - - - - - - - - -160M 17.91 10.75 11.10 12.72 13.78 - - - - - - - - - - - -160L 19.69 10.75 11.10 12.72 13.78 - - - - - - - - - - - -180M 21.93 15.04 12.09 - 13.78 - - - - - - - - - - - -180L 23.43 15.04 12.09 - 13.78 - - - - - - - - - - - -200L 25.91 16.54 14.65 - 15.75 - - - - - - - - - - - -225S 26.42 18.03 16.81 - 17.72 - - - - - - - - - - - -225M 27.40 18.03 16.81 - 17.72 - - - - - - - - - - - -250M 30.35 20.08 19.29 - 21.65 - - - - - - - - - - - -280S 32.95 22.68 20.47 - 21.65 - - - - - - - - - - - -280M 34.96 22.68 20.47 - 21.65 - - - - - - - - - - - -


i2Low Speed Shaft

dp sp5

0.75 1.575 19/32 0.829 3/16

1.0 1.969 19/16 1.106 1/4

1.0 1.969 19/16 1.106 1/4

1.25 2.362 2 1.359 1/4

1.375 2.756 23/8 1.507 5/16

1.375 2.756 23/8 1.507 5/16

1.625 3.15 23/8 1.784 3/8

2.125 3.937 23/4 2.338 1/2

4.72 3.15 0.35 3.94 0.12 1.57 0.355.51 3.74 0.35 4.53 0.12 1.57 0.356.30 4.33 0.39 5.12 0.14 1.57 0.357.87 5.12 0.39 6.50 0.14 1.57 0.434.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.434.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.435.51 3.74 0.43 4.53 0.12 2.36 0.356.30 4.33 0.43 5.12 0.14 2.36 0.357.87 5.12 0.43 6.50 0.14 2.36 0.439.84 7.09 0.43 8.46 0.16 2.36 0.535.51 3.74 0.43 4.53 0.12 2.76 0.356.30 4.33 0.43 5.12 0.14 2.76 0.357.87 5.12 0.43 6.50 0.14 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.537.87 5.12 0.43 6.50 0.16 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.5311.81 9.06 0.43 10.43 0.16 2.76 0.537.87 5.12 0.43 6.50 0.14 3.15 0.439.84 7.09 0.43 8.46 0.16 3.15 0.5311.81 9.06 0.43 10.43 0.16 3.15 0.5311.81 9.06 0.67 10.43 0.16 3.94 0.5313.78 9.84 0.67 11.81 0.20 3.94 0.6917.72 13.78 0.71 15.75 0.20 - 5.51 7.80 - 9.06 0.71

17.72 13.78 0.87 15.75 0.20 - 5.51 9.65 - 10.24 0.71

21.65 17.72 0.98 19.69 0.20 - 6.69 11.34 - 10.94 0.71

21.65 17.72 0.98 19.69 0.20 - 8.27 12.60 - 12.52 0.71

0311

86



Ko* g g2 g6

M0132

g1**

M0232 M0332 M0432

K* Kb*

M0532

K*

M0632


56C 12.00 7.19 5.00 - 6.50 22.04 - 23.18 - 23.18 - 25.03 - 25.43 - 26.25 -143-145TC 12.00 7.19 5.25 - 6.50 22.04 - 23.18 - 23.18 - 25.03 - 25.43 - 26.25 -182-184TC 15.50 8.50 5.88 - 9.00 24.79 - 25.93 - 25.93 - 27.78 - 28.18 - 29.00 -213-215TC 16.50 10.19 7.38 - 9.00 - - - - - - - - - - - -254-256TC 20.00 12.50 9.63 - 10.00 - - - - - - - - - - - -284-286TC 23.25 15.56 13.13 - 11.25 - - - - - - - - - - - -324-326TC 25.25 16.94 14.13 - 13.38 - - - - - - - - - - - -364-365TC 27.00 19.00 15.13 - 13.38 - - - - - - - - - - - -404-405TC 30.00 20.63 18.00 - 13.38 - - - - - - - - - - - -


Ko* g g2 g6

M0732

g1**

M0832 M0931 M1031

K* Kb*

M1331

K*

M1431


56C 12.00 7.19 5.00 - 6.50 27.39 - 30.78 - - - - - - - - -143-145TC 12.00 7.19 5.25 - 6.50 27.39 - 30.78 - - - - - - - - -182-184TC 15.50 8.50 5.88 - 9.00 31.88 - 34.63 - 19.48 - 19.59 - 21.96 - 21.52 -213-215TC 16.50 10.19 7.38 - 9.00 32.88 - 35.63 - 20.48 - 20.59 - 22.96 - 22.52 -254-256TC 20.00 12.50 9.63 - 10.00 - - 39.06 - 25.35 - 25.47 - 26.46 - 26.02 -284-286TC 23.25 15.56 13.13 - 11.25 - - - - 28.72 - 28.84 - 29.82 - 29.39 -324-326TC 25.25 16.94 14.13 - 13.38 - - - - 31.35 - 31.47 - 32.45 - 32.02 -364-365TC 27.00 19.00 15.13 - 13.38 - - - - - - - - 40.90 - 40.46 -404-405TC 30.00 20.63 18.00 - 13.38 - - - - - - - - 45.28 - 44.84 -


Ko* g g2 g6

M0732

g1**

M0832 M0931 M1031

K* Kb*

M1331

K*

M1431

Kb* K* Kb* K* Kb* K* Kb* K* Kb*63 8.58 4.80 3.78 6.30 5.51 - - - - - - - - - - - -71 8.70 5.43 4.02 6.57 4.13 - - - - - - - - - - - -80A 9.41 6.18 4.92 7.48 4.72 24.25 21.02 27.60 24.37 12.72 9.49 13.27 10.04 - - - -80B 9.76 6.18 4.92 7.48 4.72 24.61 21.02 27.95 24.37 13.07 9.49 13.62 10.04 - - - -90S 10.24 6.97 5.24 8.58 5.51 25.47 22.20 28.82 25.55 13.54 10.28 14.09 10.83 - - - -90L 10.83 6.97 5.24 8.58 5.51 26.06 22.20 29.41 25.55 14.13 10.28 14.69 10.83 - - - -90LA 11.18 6.97 5.24 8.58 5.51 26.42 22.20 29.76 25.55 14.49 10.28 15.04 10.83 - - - -100L 12.20 7.76 5.67 9.37 6.30 28.50 24.06 31.22 26.77 15.75 11.30 16.30 11.85 18.43 13.98 17.99 13.54112M 12.80 8.62 6.10 9.37 6.30 29.09 24.92 31.81 27.64 16.34 12.17 16.89 12.72 19.02 14.84 18.58 14.41112MA 13.54 8.62 6.10 9.37 6.30 29.84 24.92 32.56 27.64 17.09 12.17 17.64 12.72 19.76 14.84 19.33 14.41132SA 15.43 9.25 6.77 11.34 7.87 31.69 25.51 35.35 29.17 - - 19.53 13.35 21.65 15.47 21.22 15.04132M 16.22 9.25 6.77 11.34 7.87 32.48 25.51 36.14 29.17 - - 20.31 13.35 22.44 15.47 22.01 15.04132MA 17.17 9.25 6.77 11.34 7.87 33.43 25.51 37.09 29.17 - - 21.26 13.35 23.39 15.47 22.95 15.04132MB 18.58 9.25 6.77 11.34 7.87 34.84 25.51 38.50 29.17 - - 22.68 13.35 24.80 15.47 24.37 15.04160M 17.91 10.75 11.10 12.72 13.78 - - 38.15 30.98 - - 23.39 16.22 23.86 16.69 23.43 16.26160L 19.69 10.75 11.10 12.72 13.78 - - 39.92 30.98 - - 25.16 16.22 25.63 16.69 25.20 16.26180M 21.93 15.04 12.09 - 13.78 - - - - - - 27.40 - 27.87 - 27.44 -180L 23.43 15.04 12.09 - 13.78 - - - - - - 28.90 - 29.37 - 28.94 -200L 25.91 16.54 14.65 - 15.75 - - - - - - 31.38 - 31.85 - 31.42 -225S 26.42 18.03 16.81 - 17.72 - - - - - - 32.95 - 33.43 - 32.99 -225M 27.40 18.03 16.81 - 17.72 - - - - - - 33.94 - 34.41 - 33.98 -250M 30.35 20.08 19.29 - 21.65 - - - - - - - - 44.13 - 43.70 -280S 32.95 22.68 20.47 - 21.65 - - - - - - - - 46.73 - 46.30 -280M 34.96 22.68 20.47 - 21.65 - - - - - - - - 48.74 - 48.31 -




h1

f1

c1

i2

LL12

ød

TappedHole w

øb

1ø

a1

g2g

g6

v2v3

ko

k

kb

t

uLow Speed Shaft

4 x øs

g1

øe1

g1

8 x øs

øe1

p3p

p5

0311

87

DIMENSIONS - QUADRUPLE REDUCTIONFLANGE MOUNT

Note: Sizes 03 to 08 are also available asC-Flange (B14) Mounting, pleasesee page 107 for details.

Sizes3, 4, 5, 6, 7 and 8

Sizes9, 10, 13 and 14


i2Low Speed Shaft

dp s

M0941

M1041

M1341

M1441

v2 v3p5

4.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.435.51 3.74 0.43 4.53 0.12 2.36 0.356.30 4.33 0.43 5.12 0.14 2.36 0.357.87 5.12 0.43 6.50 0.14 2.36 0.439.84 7.09 0.43 8.46 0.16 2.36 0.535.51 3.74 0.43 4.53 0.12 2.76 0.356.30 4.33 0.43 5.12 0.14 2.76 0.357.87 5.12 0.43 6.50 0.14 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.537.87 5.12 0.43 6.50 0.16 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.5311.81 9.06 0.43 10.43 0.16 2.76 0.537.87 5.12 0.43 6.50 0.14 3.15 0.439.84 7.09 0.43 8.46 0.16 3.15 0.5311.81 9.06 0.43 10.43 0.16 3.15 0.5311.81 9.06 0.67 10.43 0.16 3.94 0.5313.78 9.84 0.67 11.81 0.20 3.94 0.6917.72 13.78 0.71 15.75 0.20 - 5.51 7.80 - 9.06 0.71 4.53 -

17.72 13.78 0.87 15.75 0.20 - 5.51 9.65 - 10.24 0.71 5.51 6.10

21.65 17.72 0.98 19.69 0.20 - 6.69 11.34 - 10.94 0.71 5.51 6.10

21.65 17.72 0.98 19.69 0.20 - 8.27 12.60 - 12.52 0.71 5.51 6.10

- - 3.50 3.58 2.99 -

- - 3.58 4.53 3.58 -

- - 3.58 4.53 3.58 -

0.57 4.45 3.19 5.12 3.58 -

- 5.98 4.21 5.51 3.58 -

- 6.89 4.92 7.17 4.53 -

1.0 1.969 19/16 1.106 1/4

1.25 2.362 2 1.359 1/4

1.375 2.756 23/8 1.507 5/16

1.375 2.756 23/8 1.507 5/16

1.625 3.15 23/8 1.784 3/8

2.125 3.937 23/4 2.338 1/22.375 4.72 311/16 2.65 0.625

2.875 5.51 45/8 3.20 0.75

3.625 6.69 515/16 4.01 0.875

4.00 8.27 71/2 4.44 1.00

1/4 UNF x

0.71 deep

3/8 UNF x

0.86 deep

3/8 UNF x

0.75 deep

3/8 UNF x

0.75 deep5/8 UNF x

1.25 deep3/4 UNF x 1.50 deep


1 UNF x 1.97 deep

1 UNF x 1.97 deep

M0342

M0442

M0542

M0642

M0742

M0842


Ko* g g2 g6g1**

M0941 M1041 M1341

K* Kb*

M1441


63 8.58 4.80 3.78 6.30 5.51 34.49 36.26 37.68 39.45 41.69 43.46 46.46 48.23 50.98 52.7671 8.70 5.43 4.02 6.57 4.13 34.84 36.57 38.03 39.76 41.81 43.54 46.57 48.31 51.10 52.8380A 9.41 6.18 4.92 7.48 4.72 36.26 38.31 39.45 41.50 43.98 46.02 48.74 50.79 53.27 55.3180B 9.76 6.18 4.92 7.48 4.72 36.61 38.66 39.80 41.85 44.33 46.38 49.09 51.14 53.62 55.6790S 10.24 6.97 5.24 8.58 5.51 37.48 39.53 40.67 42.72 45.20 47.24 49.96 52.01 54.49 56.5490L 10.83 6.97 5.24 8.58 5.51 38.07 40.12 41.26 43.31 45.79 47.83 50.55 52.60 55.08 57.1390LA 11.18 6.97 5.24 8.58 5.51 38.43 40.47 41.61 43.66 46.14 48.19 50.91 52.95 55.43 57.48100L 12.20 7.76 5.67 9.37 6.30 40.51 42.87 43.70 46.06 47.60 49.96 52.36 54.72 56.89 59.25112M 12.80 8.62 6.10 9.37 6.30 41.10 44.02 44.29 47.20 48.19 51.10 52.95 55.87 57.48 60.39112MA 13.54 8.62 6.10 9.37 6.30 41.85 44.80 45.04 47.99 48.94 51.89 53.70 56.65 58.23 61.18132SA 15.43 9.25 6.77 11.34 7.87 43.70 46.97 46.89 50.16 51.73 55.00 56.50 59.76 61.02 64.29132M 16.22 9.25 6.77 11.34 7.87 44.49 47.76 47.68 50.94 52.52 55.79 57.28 60.55 61.81 65.08132MA 17.17 9.25 6.77 11.34 7.87 45.43 48.70 48.62 51.89 53.46 56.73 58.23 61.50 62.76 66.02132MB 18.58 9.25 6.77 11.34 7.87 46.85 50.12 50.04 53.31 54.88 58.15 59.65 62.91 64.17 67.44160M 17.91 10.75 11.10 12.72 13.78 - - - - 54.53 57.80 59.29 62.56 63.82 67.09160L 19.69 10.75 11.10 12.72 13.78 - - - - 56.30 59.57 61.06 64.33 65.59 68.86

M0842


Ko* g g2 g6

M0342

g1**

M0442 M0542 M0642

K* Kb*

M0742


56C 12.00 7.19 5.00 - 6.50 29.99 - 32.67 - 33.06 - 33.89 - 35.35 -143-145TC 12.00 7.19 5.25 - 6.50 32.67 - 32.67 - 33.06 - 33.89 - 35.35 -182-184TC 15.50 8.50 5.88 - 9.00 - - - - - - - - - -213-215TC 16.50 10.19 7.38 - 9.00 - - - - - - - - - -


Ko* g g2 g6

M0842

g1**

M0941 M1041 M1341

K* Kb*

M1441


56C 12.00 7.19 5.00 - 6.50 39.40 - 42.59 - 47.16 - 51.92 - 56.45 -143-145TC 12.00 7.19 5.25 - 6.50 39.40 - 42.59 - 47.16 - 51.92 - 56.45 -182-184TC 15.50 8.50 5.88 - 9.00 43.89 - 47.07 - 51.01 - 55.78 - 60.30 -213-215TC 16.50 10.19 7.38 - 9.00 - - - - 52.01 - 56.78 - 61.30 -


Ko* g g2 g6

M0342

g1**

M0442 M0542 M0642

K* Kb*

M0742

K* Kb* K* Kb* Kb*K* K* Kb*63 8.58 4.80 3.78 6.30 5.51 25.35 27.13 28.03 29.80 28.43 30.20 29.25 31.02 30.71 32.4871 8.70 5.43 4.02 6.57 4.13 25.63 27.36 28.31 30.04 28.70 30.43 29.53 31.26 30.98 32.7280A 9.41 6.18 4.92 7.48 4.72 26.85 28.90 29.53 31.57 29.92 31.97 30.75 32.80 32.20 34.2580B 9.76 6.18 4.92 7.48 4.72 27.20 29.25 29.88 31.93 30.28 32.32 31.10 33.15 32.56 34.6190S 10.24 6.97 5.24 8.58 5.51 28.07 30.12 30.75 32.80 31.14 33.19 31.97 34.02 33.43 35.4790L 10.83 6.97 5.24 8.58 5.51 28.66 30.71 31.34 33.39 31.73 33.78 32.56 34.61 34.02 36.0690LA 11.18 6.97 5.24 8.58 5.51 29.02 31.06 31.69 33.74 32.09 34.13 32.91 34.96 34.37 36.42100L 12.20 7.76 5.67 9.37 6.30 29.61 31.97 32.28 34.65 32.68 35.04 33.50 35.87 34.96 37.32112M 12.80 8.62 6.10 9.37 6.30 30.20 33.11 32.87 35.79 33.27 36.18 34.09 37.01 35.55 38.46112MA 13.54 8.62 6.10 9.37 6.30 30.94 33.90 33.62 36.57 34.02 36.97 34.84 37.80 36.30 39.25132SA 15.43 9.25 6.77 11.34 7.87 - - - - - - - - - -132M 16.22 9.25 6.77 11.34 7.87 - - - - - - - - - -132MA 17.17 9.25 6.77 11.34 7.87 - - - - - - - - - -132MB 18.58 9.25 6.77 11.34 7.87 - - - - - - - - - -160M 17.91 10.75 11.10 12.72 13.78 - - - - - - - - - -160L 19.69 10.75 11.10 12.72 13.78 - - - - - - - - - -




0311

88


h1

f1

c1

i2

LL12

ød

TappedHole w

øb

1ø

a1

g2g

g6

v2v3

ko

k

kb

t

uLow Speed Shaft

4 x øs

g1

øe1

g1

8 x øs

øe1

p3p

p5

0206

89

DIMENSIONS - QUINTUPLE REDUCTIONFLANGE MOUNT


Sizes3, 4, 5, 6, 7 and 8

Sizes9, 10, 13 and 14


i2Low Speed Shaft

dp s

M0941

M1041

M1341

M1441

v2 v3p5

4.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.435.51 3.74 0.43 4.53 0.12 2.36 0.356.30 4.33 0.43 5.12 0.14 2.36 0.357.87 5.12 0.43 6.50 0.14 2.36 0.439.84 7.09 0.43 8.46 0.16 2.36 0.535.51 3.74 0.43 4.53 0.12 2.76 0.356.30 4.33 0.43 5.12 0.14 2.76 0.357.87 5.12 0.43 6.50 0.14 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.537.87 5.12 0.43 6.50 0.16 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.5311.81 9.06 0.43 10.43 0.16 2.76 0.537.87 5.12 0.43 6.50 0.14 3.15 0.439.84 7.09 0.43 8.46 0.16 3.15 0.5311.81 9.06 0.43 10.43 0.16 3.15 0.5311.81 9.06 0.67 10.43 0.16 3.94 0.5313.78 9.84 0.67 11.81 0.20 3.94 0.6917.72 13.78 0.71 15.75 0.20 - 5.51 7.80 - 9.06 0.71 4.53 -

17.72 13.78 0.87 15.75 0.20 - 5.51 9.65 - 10.24 0.71 5.51 6.10

21.65 17.72 0.98 19.69 0.20 - 6.69 11.34 - 10.94 0.71 5.51 6.10

21.65 17.72 0.98 19.69 0.20 - 8.27 12.60 - 12.52 0.71 5.51 6.10

- - 3.50 3.58 2.99 -

- - 3.58 4.53 3.58 -

- - 3.58 4.53 3.58 -

0.57 4.45 3.19 5.12 3.58 -

- 5.98 4.21 5.51 3.58 -

- 6.89 4.92 7.17 4.53 -

1.0 1.969 19/16 1.106 1/4

1.25 2.362 2 1.359 1/4

1.375 2.756 23/8 1.507 5/16

1.375 2.756 23/8 1.507 5/16

1.625 3.15 23/8 1.784 3/8

2.125 3.937 23/4 2.338 1/22.375 4.72 311/16 2.65 0.625

2.875 5.51 45/8 3.20 0.75

3.625 6.69 515/16 4.01 0.875

4.00 8.27 71/2 4.44 1.00

1/4 UNF x

0.71 deep

3/8 UNF x

0.86 deep

3/8 UNF x

0.75 deep

3/8 UNF x

0.75 deep5/8 UNF x

1.25 deep3/4 UNF x 1.50 deep


1 UNF x 1.97 deep

1 UNF x 1.97 deep

M0342

M0442

M0542

M0642

M0742

M0842



56C 12.00 7.19 5.00 - 6.50 30.58 - 33.18 - 33.57 - 34.40 - 35.86 -

143-145TC 12.00 7.19 5.25 - 6.50 33.18 - 33.18 - 33.57 - 34.40 - 35.86 -

182-184TC 15.50 8.50 5.88 - 9.00 - - - - - - - - - -


63 8.58 4.80 3.78 6.30 5.51 25.94 27.72 28.54 30.31 28.94 30.71 29.76 31.54 31.22 32.99

71 8.70 5.43 4.02 6.57 4.13 26.22 27.95 28.82 30.55 29.21 30.94 30.04 31.77 31.50 33.23

80A 9.41 6.18 4.92 7.48 4.72 27.44 29.49 30.04 32.09 30.43 32.48 31.26 33.31 32.72 34.76

80B 9.76 6.18 4.92 7.48 4.72 27.80 29.84 30.39 32.44 30.79 32.83 31.61 33.66 33.07 35.12

90S 10.24 6.97 5.24 8.58 5.51 28.66 30.71 31.26 33.31 31.65 33.70 32.48 34.53 33.94 35.98

90L 10.83 6.97 5.24 8.58 5.51 29.25 31.30 31.85 33.90 32.24 34.29 33.07 35.12 34.53 36.57

90LA 11.18 6.97 5.24 8.58 5.51 29.61 31.65 32.20 34.25 32.60 34.65 33.43 35.47 34.88 36.93

100L 12.20 7.76 5.67 9.37 6.30 30.20 32.56 32.80 35.16 33.19 35.55 34.02 36.38 35.47 37.83

112M 12.80 8.62 6.10 9.37 6.30 30.79 33.70 33.39 36.30 33.78 36.69 34.61 37.52 36.06 38.98

112MA 13.54 8.62 6.10 9.37 6.30 31.54 34.49 34.13 37.09 34.53 37.48 35.35 38.31 36.81 39.76



63 8.58 4.80 3.78 6.30 5.51 34.80 36.57 37.99 39.76 42.32 44.09 47.09 48.86 51.61 53.39

71 8.70 5.43 4.02 6.57 4.13 35.16 36.89 38.35 40.08 42.44 44.17 47.20 48.94 51.73 53.46

80A 9.41 6.18 4.92 7.48 4.72 36.57 38.62 39.76 41.81 44.61 46.65 49.37 51.42 53.90 55.94

80B 9.76 6.18 4.92 7.48 4.72 36.93 38.98 40.12 42.17 44.96 47.01 49.72 51.77 54.25 56.30

90S 10.24 6.97 5.24 8.58 5.51 37.80 39.84 40.98 43.03 45.83 47.87 50.59 52.64 55.12 57.17

90L 10.83 6.97 5.24 8.58 5.51 38.39 40.43 41.57 43.62 46.42 48.46 51.18 53.23 55.71 57.76

90LA 11.18 6.97 5.24 8.58 5.51 38.74 40.79 41.93 43.98 46.77 48.82 51.54 53.58 56.06 58.11

100L 12.20 7.76 5.67 9.37 6.30 40.83 43.19 44.02 46.38 48.23 50.59 52.99 55.35 57.52 59.88

112M 12.80 8.62 6.10 9.37 6.30 41.42 44.33 44.61 47.52 48.82 51.73 53.58 56.50 58.11 61.02

112MA 13.54 8.62 6.10 9.37 6.30 42.17 45.12 45.35 48.31 49.57 52.52 54.33 57.28 58.86 61.81




56C 12.00 7.19 5.00 - 6.50 39.72 - 42.91 - 47.79 - 52.55 - 57.08 -

143-145TC 12.00 7.19 5.25 - 6.50 39.72 - 42.91 - 47.79 - 52.55 - 57.08 -

182-184TC 15.50 8.50 5.88 - 9.00 44.20 - 47.39 - 51.64 - 56.41 - 60.93 -

0311

90





K1

øg

6

CW

Motor FrameSize

Lift offSpeed (‘n’ min)

(rev/min)øg6 K1

IEC B5 FLANGE

NEMA C FLANGE

Rotation of outputshaft must be specified when ordering as viewed from theoutputshaft end (as shown in the diagram) see page 33 for column 20 entry

CW - Free Rotation - ClockwiseLocked - Counterclockwise

CCW - Free Rotation - CounterclockwiseLocked - Clockwise

Motorized backstop modules can be fitted between the gear unit and motor. The backstop device incorporateshigh quality centrifugal lift off sprags which are wear free above the lift off speed (n min).To ensure correct operation motor speed must exceed lift off speed.

Suitable for ambient temperature -40oF to + 122oF (-40oC to + 50oC)

Motor FrameSize

Lift offSpeed (‘n’ min)

(rev/min)

RatedLocking Torque

(‘T max’)(at motor) (lb.in)

øg6 K1

When a backstop module is fitted dimension K1 should be added to the overall length of the geared motor assembly.

100 670 1505 9.84 2.756

112 670 1505 9.84 2.756

132 620 8320 11.81 3.740

160 620 8320 13.78 5.118

180 620 8320 13.78 5.118

200 550 11152 15.75 5.118

91

182TC / 184TC 670 2655 8.976 3.75

213TC / 215 TC 670 2655 8.976 3.75

254TC / 256TC 620 8319 8.976 4.75

284TC / 286TC 620 8319 11.02 5.374

324TC / 326TC 550 11150 12.99 6

MOTORIZED BACKSTOP MODULE0103

Warning

Removal of motoror backstop willrelease the drive.Ensure all drivenmachinery issecure prior to anymaintenance work

RatedLocking Torque

(‘T max’)(at motor) (lb.in)

0107

93

OVERHUNG & AXIAL LOADS (lbf)ON SHAFTS

B A

Frb Fra

Input Output

Maximum permissible overhung loads

When a sprocket, gear etc. is mounted on the shaft a calculation, as below, must be made to determine the overhungload on the shaft, and the results compared to the maximum permissible overhung loads tabulated. Overhung loads canbe reduced by increasing the diameter of the sprocket, gear, etc. If the maximum permissible overhung load isexceeded, the sprocket, gear, etc. should be mounted on a separate shaft, flexibly coupled and supported in its ownbearings, or the gear unit shaft should be extended to run in an outboard bearing. Alternatively, a larger gear is often aless expensive solution.

Permissible overhung loads vary according to the direction of rotation. The values tabulated are for the most unfavour-able direction with the unit transmitting full rated power and the load P applied midway along the shaft extension. Hencethey can sometimes be increased for a more favourable direction of rotation, or if the power transmitted is less than therated capacity of the gear unit, or if the load is applied nearer to the gear unit case. Refer to Textron Power Transmissionfor further details. In any event, the sprocket, gear etc. should be positioned as close as possible to the gear unit case inorder to reduce bearing loads and shaft stresses, and to prolong life.

All units will accept 100% momentary overload on stated capacities.

Overhung load (lbf)

P =

where

P = equivalent overhung load (lbf)HP = power transmitted by the shaft (HP)N = speed of shaft (rpm)D = pitch diameter of sprocket, etc. (in)K = factor

Note: 1 lbf = 4.4484 Newtons.

HP x 126,000 x K N x D

Overhung member K (factor)Chain sprocket* 1.00Spur or helical pinion 1.25Vee belt sheave 1.50Flat belt pulley 2.00

* If multistrand chain drives are equally loaded and theouter strand is further than dimension Fra output

or Frb input, refer to Textron PowerTransmission.

Size of No. of Dimension Dimensionunit Reductions A (mm) B (mm)

Distance midway along the shaft extension

M01 2 - 3 0.7875 0.785M02 2 - 3 0.9845 0.785M03 2 - 5 0.9845 0.785M04 2 - 5 1.181 0.785M05 1 0.7875 0.785

2 - 5 1.378 0.785M06 1 0.9845 0.785

2 - 5 1.378 0.785M07 1 1.181 0.985

2 1.575 0.9853 1.575 0.785

4 - 5 1.575 0.785M08 1 1.575 1.18

2 1.9685 1.183 1.9685 0.985

4 - 5 1.9685 0.785M09 2 2.36 1.575

3 2.36 1.184 - 5 2.36 0.785

M10 2 2.755 2.1653 2.755 2.165

4 - 5 2.755 0.985M13 2 - 3 3.345 2.165

4 3.345 0.9855 3.345 0.785

M14 2 - 3 4.135 2.1654 4.135 0.9855 4.135 0.785

Single Stage Units

M07 M08

Two, Three, Four and Five Stage Units

M01 M03 M04 M05 M06 M07 M10M09M08

M06

M02 M13 M14

Inputshaft Overhung Loads, Frb (lbf) 1750 rpm

0203

OVERHUNG & AXIAL LOADS (lbf)ON SHAFTS

For output overhung load Fra consult ratings tables pages 34 to 70

No check or calculation is required for axial loads (FA) towards or away from the unit up to 50% of the permissibleoverhung load. If the axial thrust considerably exceeds these values or if there is a combination of axial thrust loads andoverhung loads please contact Textron Power Transmission.

Axial Thrust Capacities (lbs)

94

2 Stage 315 345 325 250 230 190 345 315 315 535 1365 1490

3 Stage 345 365 365 315 315 315 380 470 785 880 2500 2500

4 Stage - - 315 315 315 315 315 365 365 470 470 470

5 Stage - - 315 315 315 315 315 365 365 470 470 470

Ratios

1.25 - 2.5 105 150 210 315

2.8 - 8.0 180 210 315 380

M05

95

SINGLE REDUCTION RATINGS

SINGLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0512

Pm - Input Power (HP)M2 - Output Torque (lb.in)i - Exact Ratio (:1)N2 - Output Speed (rpm)fra - Overhung Load (lbf)

1 . 2

1 . 4

1 . 8

2 . 0

2 . 5

2 . 8

3 . 2

3 . 6

4 . 0

4 . 5

5 . 0

6 . 0

7 . 1

8 . 0

6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)

M0612 M0712 M0812

0107

Note: Input Power, Pm may exceed thermal limit,Check thermal power page 108

350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875

2815 312 14.2 356 2788 631 28.3 660 2775 946 42.3 792 2789 1450 65.4 10601407 1.243 395 8.92 434 1394 1.255 798 17.8 807 1387 1.261 949 21.2 1080 1394 1.255 1470 32.9 1290933 453 6.78 487 924 825 12.2 899 919 950 14 1260 924 1470 21.8 1510703 457 5.15 530 697 826 9.22 900 693 951 10.6 1200 697 1470 16.4 16002479 326 13 370 2483 665 26.6 700 2524 1040 42.3 840 2507 1530 61.7 11001239 1.412 412 8.2 454 1241 1.409 827 16.5 848 1262 1.386 1040 21.2 1100 1253 1.396 1630 32.9 1310821 457 6.02 519 823 828 10.9 899 836 1050 14 1290 831 1630 21.8 1540619 457 4.54 550 620 828 8.23 900 631 1050 10.6 1400 626 1640 16.4 16401951 355 11.1 395 1955 735 23.1 795 1932 1160 36.2 960 1939 1700 53.1 1230975 1.793 448 7.02 495 977 1.789 928 14.6 899 966 1.811 1360 21.2 1140 969 1.805 2110 32.9 1360646 457 4.74 557 648 933 9.69 899 640 1370 14 1350 642 2110 21.8 1600487 457 3.57 620 488 933 7.3 900 483 1370 10.6 1420 484 2120 16.4 16601718 377 10.4 420 1725 770 21.4 840 1699 1220 33.4 1020 1727 1770 49.4 1290859 2.037 457 6.3 530 862 2.029 953 13.2 899 849 2.059 1540 21 1160 863 2.026 2240 31.1 1400569 457 4.17 582 571 953 8.73 899 563 1550 14 1360 572 2370 21.8 1630429 457 3.15 640 431 953 6.58 900 424 1550 10.6 1420 431 2370 16.4 16601400 414 9.33 445 1446 816 19 840 1400 1320 29.7 1020 1408 1900 43.1 1290700 2.5 457 5.14 577 723 2.419 977 11.3 899 700 2.5 1640 18.4 1260 704 2.485 2400 27.2 1510464 457 3.4 623 479 977 7.51 899 464 1640 12.2 1400 466 2760 20.6 1640350 457 2.57 700 361 977 5.66 900 350 1640 9.22 1440 352 2910 16.4 18001262 421 8.55 515 1256 851 17.2 855 1272 1360 27.8 1160 1250 1950 39.3 1360631 2.773 457 4.63 587 628 2.786 853 8.6 899 636 2.75 1710 17.4 1300 625 2.8 2460 24.7 1570418 457 3.07 639 416 854 5.7 899 421 1710 11.6 1420 414 2830 18.8 1660315 457 2.31 700 314 854 4.3 899 318 1710 8.72 1420 312 3110 15.6 18001111 436 7.79 550 1080 887 15.4 870 1107 1390 24.8 1115 1073 2050 35.5 1310555 3.15 457 4.08 605 540 3.24 964 8.36 899 553 3.16 1760 15.6 1340 536 3.259 2590 22.4 1660368 457 2.7 664 358 964 5.54 899 367 1850 10.9 1420 355 2980 17 1700277 457 2.04 664 270 965 4.18 899 276 1850 8.23 1420 268 3270 14.1 1800977 433 6.83 570 965 916 14.2 885 976 1460 23 1210 968 2110 32.9 1330488 3.579 434 3.42 652 482 3.625 1010 7.86 899 488 3.583 1850 14.5 1410 484 3.615 2660 20.7 1750324 434 2.26 697 320 1010 5.21 899 323 1940 10.1 1440 320 2780 14.3 1800244 434 1.71 697 241 1010 3.93 899 244 1940 7.62 1440 242 2780 10.8 1800888 433 6.19 590 905 934 13.6 899 885 1470 21 1210 884 2130 30.3 1360444 3.941 433 3.1 653 452 3.864 1050 7.61 899 442 3.952 1860 13.2 1380 442 3.957 2660 18.9 1710294 433 2.05 697 300 1050 5.04 899 293 1940 9.15 1440 293 2660 12.5 1800222 434 1.55 697 226 1050 3.8 899 221 1940 6.9 1440 221 2670 9.46 1800772 454 5.65 600 764 957 11.8 899 773 1530 19 1270 781 2200 27.8 1450386 4.533 454 2.83 666 382 4.579 1040 6.41 899 386 4.526 1930 12 1420 390 4.476 2780 17.5 1740255 455 1.87 697 253 1040 4.25 899 256 1940 8 1440 259 2860 11.9 1800193 455 1.41 697 191 1040 3.2 899 193 1940 6.03 1440 195 2860 8.97 1800710 429 4.92 615 715 969 11.2 899 683 1550 17 1330 692 2250 25.2 1520355 4.929 429 2.46 692 357 4.889 1050 6.02 899 341 5.118 1940 10.7 1440 346 5.053 2850 15.9 1770235 430 1.63 697 237 1050 3.99 899 226 1940 7.08 1440 229 3000 11.1 1800177 430 1.23 697 178 1050 3.01 899 170 1940 5.34 1440 173 3000 8.36 1520591 452 4.33 620 576 1000 9.34 899 589 1580 15.1 1370 571 2300 21.2 1620295 5.917 453 2.16 697 288 6.067 1050 4.86 899 294 5.933 1940 9.22 1440 285 6.125 2910 13.4 1800196 453 1.43 697 191 1050 3.22 899 195 1940 6.11 1440 189 3260 9.94 1800147 453 1.08 697 144 1050 2.43 899 147 1940 4.61 1370 142 3260 7.5 1800492 457 3.65 635 489 1030 8.11 899 494 1640 13.1 1440 490 2350 18.6 1710246 7.1 457 1.82 697 244 7.154 1050 4.12 899 247 7.077 1940 7.74 1440 245 7.143 2970 11.7 1800163 457 1.21 697 162 1050 2.73 899 163 1940 5.13 1440 162 3410 8.92 1800123 457 0.91 697 122 1050 2.06 899 123 1940 3.87 1440 122 3440 6.79 1800437 457 3.24 650 446 1040 7.49 899 451 1660 12.1 1440 446 2400 17.3 1800218 8 457 1.62 697 223 7.833 1050 3.77 899 225 7.75 1940 7.08 1440 223 7.846 3030 10.9 1800145 457 1.07 697 148 1050 2.5 899 149 1940 4.69 1440 147 3440 8.2 1800109 457 0.809 697 111 1050 1.88 899 112 1940 3.54 1440 111 3440 6.18 1800

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

DOUBLE REDUCTION RATINGSSIZES M01 - M04

DOUBLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0122

Pm - Input Power (HP)M2 - Output Torque (lb.in)i - Exact Ratio (:1)

3 . 6

5 . 0

5 . 6

6 . 3

8 . 0

9 . 0

1 1 .

1 2 .

1 4 .

1 6 .

1 8 .

2 8 .

3 2 .

3 6 .

6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)

M0222

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0322

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0422

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

N2 - Output Speed (rpm)fra - Overhung Load (lbf)

2 0 .

2 2 .

4 5 .

5 0 .

5 6 .

0107

350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875

933 391 6.04 250 975 660 10.7 630 975 803 12.9 530 976 1340 21.6 780466 3.75 493 3.78 253 487 3.589 833 6.67 678 487 3.589 991 7.93 562 488 3.585 1690 13.5 825309 566 2.87 270 323 956 5.06 684 323 1120 5.94 562 323 1930 10.2 863233 622 2.38 270 243 1050 4.19 680 243 1220 4.87 560 244 2130 8.47 900690 445 5.09 250 695 763 8.77 630 695 919 10.5 520 694 1560 17.9 800345 5.066 562 3.19 261 347 5.034 963 5.49 660 347 5.034 1130 6.45 535 347 5.04 1970 11.2 843228 645 2.42 278 230 1110 4.17 666 230 1280 4.83 536 230 2260 8.51 903172 679 1.92 290 173 1180 3.35 680 173 1400 3.96 540 173 2490 7.04 950607 471 4.72 250 630 794 8.28 630 630 953 9.91 510 619 1640 16.8 810303 5.762 594 2.96 265 315 5.547 1000 5.19 656 315 5.547 1170 6.07 529 309 5.649 2070 10.5 855201 671 2.22 283 209 1150 3.94 661 209 1330 4.55 529 205 2380 7.97 917151 701 1.74 300 157 1200 3.1 680 157 1450 3.73 529 154 2570 6.48 950536 494 4.37 250 555 837 7.68 630 555 1000 9.16 510 551 1730 15.7 820268 6.528 623 2.74 269 277 6.299 1060 4.81 651 277 6.299 1230 5.61 521 275 6.341 2180 9.83 870177 689 2.01 291 184 1190 3.58 671 184 1400 4.2 517 182 2500 7.46 932134 720 1.58 320 138 1240 2.82 690 138 1520 3.45 520 137 2640 5.94 960419 545 3.77 250 437 921 6.64 640 437 1090 7.86 490 434 1900 13.6 830209 8.348 683 2.35 277 218 8 1160 4.16 640 218 8 1340 4.82 505 217 8.053 2400 8.53 900138 727 1.66 317 145 1250 2.96 697 145 1520 3.61 496 144 2670 6.28 975104 768 1.32 350 109 1310 2.35 760 109 1660 2.96 500 108 2790 4.94 1020389 560 3.59 260 385 965 6.13 640 385 1140 7.22 480 383 2000 12.6 840194 8.997 692 2.21 281 192 9.088 1200 3.79 647 192 9.088 1400 4.43 498 191 9.129 2520 7.91 916128 737 1.56 327 127 1280 2.67 736 127 1590 3.32 509 127 2740 5.69 100097 782 1.25 350 96 1350 2.13 820 96 1730 2.72 520 95 2870 4.49 1100308 612 3.11 270 313 1040 5.37 645 313 1220 6.29 460 321 2140 11.3 860154 11.36 724 1.83 301 156 11.15 1250 3.21 674 156 11.15 1500 3.86 487 160 10.89 2670 7.02 944102 782 1.31 357 104 1340 2.28 798 104 1700 2.89 535 106 2840 4.95 105077 794 1 360 78 1410 1.82 840 78 1850 2.37 570 80 2990 3.93 1160271 641 2.87 270 282 1080 5.04 645 282 1260 5.88 460 279 2260 10.4 880135 12.88 742 1.66 317 141 12.37 1270 2.95 690 141 12.37 1560 3.61 482 139 12.54 2750 6.28 97390 794 1.17 349 93 1380 2.11 828 93 1760 2.7 545 92 2940 4.45 110067 794 0.884 350 70 1410 1.64 870 70 1850 2.14 630 69 2990 3.41 1220237 673 2.64 280 249 1130 4.65 650 249 1320 5.4 480 240 2390 9.44 900118 14.71 763 1.49 334 124 14.05 1300 2.66 731 124 14.05 1620 3.31 496 120 14.58 2830 5.56 101078 794 1.03 349 82 1410 1.91 871 82 1840 2.48 561 79 2990 3.89 117059 794 0.775 350 62 1410 1.44 899 62 1850 1.88 630 60 2990 2.93 1340213 697 2.46 290 219 1200 4.35 650 219 1390 5.01 480 214 2530 8.92 910106 16.37 783 1.38 348 109 15.97 1360 2.45 756 109 15.97 1720 3.09 494 107 16.31 2930 5.15 103070 794 0.926 349 72 1410 1.69 899 72 1850 2.2 626 71 2990 3.48 123053 794 0.698 350 54 1410 1.27 899 54 1850 1.66 626 53 2990 2.63 1420193 710 2.27 300 199 1220 3.99 650 199 1420 4.64 510 201 2550 8.44 93096 18.05 794 1.27 349 99 17.58 1370 2.24 799 99 17.58 1740 2.85 525 100 17.39 2920 4.81 107064 794 0.838 349 65 1410 1.53 899 65 1850 2 680 66 2990 3.26 127048 794 0.632 350 49 1410 1.15 899 49 1850 1.51 680 50 2990 2.46 1510176 721 2.1 310 173 1250 3.56 670 173 1480 4.22 520 169 2710 7.57 99088 19.86 794 1.15 349 86 20.23 1410 2.01 844 86 20.23 1830 2.59 542 84 20.61 2990 4.16 114058 794 0.762 349 57 1410 1.33 899 57 1850 1.74 680 56 2990 2.76 137044 794 0.575 349 43 1410 1 899 43 1850 1.31 680 42 2990 2.08 1600150 742 1.84 320 159 1270 3.33 690 159 1520 3.99 530 159 2740 7.17 101075 23.27 794 0.983 349 79 21.99 1410 1.85 892 79 21.99 1850 2.42 573 79 22 2990 3.9 117049 794 0.652 349 52 1410 1.23 899 52 1850 1.6 680 52 2990 2.58 140037 794 0.491 349 39 1410 0.924 899 39 1850 1.21 680 39 2990 1.95 1600125 767 1.59 349 132 1310 2.86 760 132 1610 3.53 530 128 2850 6.01 110062 27.92 794 0.821 349 66 26.4 1410 1.54 899 66 26.4 1850 2.02 680 64 27.3 2990 3.15 129041 794 0.544 349 43 1410 1.02 899 43 1850 1.34 680 42 2990 2.08 154031 794 0.41 349 33 1410 0.771 899 33 1850 1.01 680 32 2990 1.57 1600107 791 1.41 349 110 1360 2.48 860 110 1710 3.12 550 108 2930 5.25 116053 32.54 794 0.705 349 55 31.68 1410 1.29 899 55 31.68 1850 1.68 680 54 32.19 2990 2.67 139035 794 0.467 349 36 1410 0.854 899 36 1850 1.12 680 36 2990 1.77 160026 795 0.352 349 27 1410 0.644 899 27 1850 0.841 680 27 2990 1.33 160096 794 1.27 349 98 1390 2.26 899 98 1780 2.88 570 99 2980 4.87 127048 36.16 794 0.635 349 49 35.69 1410 1.15 899 49 35.69 1850 1.5 680 49 35.25 2990 2.44 144032 794 0.421 349 32 1410 0.759 899 32 1850 0.991 680 32 2990 1.62 160024 795 0.318 349 24 1410 0.572 899 24 1850 0.748 680 24 2990 1.22 160080 740 0.983 349 84 1410 1.97 899 84 1640 2.28 570 81 2990 4 130040 43.54 741 0.492 390 42 41.49 1410 0.984 899 42 41.49 1730 1.2 768 40 43.2 2990 2 157026 741 0.326 389 27 1410 0.652 899 27 1790 0.825 724 26 2990 1.32 160020 742 0.246 389 21 1410 0.492 899 21 1830 0.637 724 20 2990 0.998 160070 635 0.737 389 74 1410 1.74 899 74 1680 2.06 640 72 2990 3.59 141035 49.91 636 0.369 417 37 47.09 1410 0.868 899 37 47.09 1770 1.08 741 36 48.15 2990 1.79 160023 636 0.244 417 24 1410 0.575 899 24 1830 0.743 695 24 2990 1.19 160017 636 0.184 417 18 1410 0.434 899 18 1840 0.565 695 18 2990 0.896 160061 624 0.639 417 65 1410 1.53 899 65 1820 1.97 702 64 2380 2.56 156030 56.72 625 0.32 419 32 53.54 1410 0.765 899 32 53.54 1820 0.983 703 32 54 2390 1.28 162020 626 0.212 419 21 1410 0.507 899 21 1820 0.652 702 21 2390 0.847 162015 626 0.16 419 16 1410 0.382 899 16 1820 0.492 702 16 2390 0.639 1620

96


DOUBLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0522


3 . 6

5 . 0

5 . 6

6 . 3

8 . 0

9 . 0

1 1 .

1 2 .

1 4 .

1 6 .

1 8 .

2 8 .

3 2 .

3 6 .

6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)

M0622

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0722

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0822

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)


2 0 .

2 2 .

5 0 .

5 6 .

6 3 .

0107

4 5 .

350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875

976 2190 35.1 550 951 2690 42.3 977 951 4160 65.7 1840488 3.585 2590 20.6 561 475 3.678 2700 21.2 1390 475 3.678 4190 32.9 2670323 2590 13.7 687 315 2710 14 1540 315 4200 21.8 2920244 2590 10.3 710 237 2710 10.6 1670 237 4210 16.4 2920694 2630 30 220 788 2710 35.1 1280 687 3530 39.9 740 671 5930 65.7 1840347 5.04 3340 18.9 266 394 4.438 3200 20.6 1460 343 5.094 3760 21.2 1060 335 5.214 5960 32.9 2510230 3380 12.7 404 261 3210 13.7 1620 227 3760 14 1270 222 5980 21.8 2830173 3390 9.59 450 197 3210 10.3 1710 171 3770 10.6 1370 167 5980 16.4 2830619 2790 28.3 200 560 3260 30 1160 611 3710 37.4 650 604 6570 65.4 1840309 5.649 3530 17.8 209 280 6.24 4130 18.9 1160 305 5.722 4220 21.2 925 302 5.792 6630 32.9 2330205 3650 12.2 313 185 4190 12.7 1400 202 4230 14 1140 200 6640 21.8 2680154 3650 9.22 360 140 4190 9.59 1510 152 4230 10.6 1230 151 6650 16.4 2680551 2940 26.6 170 500 3450 28.3 1100 556 3860 35.4 560 543 6900 61.7 1840275 6.341 3650 16.5 187 250 6.994 4370 17.8 1110 278 6.292 4640 21.2 797 271 6.442 7380 32.9 2120182 3660 10.9 358 165 4520 12.2 1310 184 4650 14 1020 180 7390 21.8 2510137 3660 8.23 390 125 4520 9.22 1370 139 4650 10.6 1100 135 7400 16.4 2510434 3250 23.1 112 445 3640 26.6 1100 425 4320 30.2 550 420 7680 53.1 1140217 8.053 3980 14.1 114 222 7.851 4530 16.5 1100 212 8.218 5440 19 605 210 8.33 9560 32.9 1560144 3980 9.35 294 147 4530 10.9 1380 141 6080 14 572 139 9570 21.8 1970108 3980 7.05 340 111 4530 8.23 1400 106 6080 10.6 760 105 9580 16.4 1970383 3400 21.4 150 351 4020 23.1 970 374 4540 28 550 374 8020 49.4 1180191 9.129 3980 12.5 167 175 9.97 5080 14.6 971 187 9.344 5730 17.6 556 187 9.352 10200 31.1 1450127 3980 8.25 351 116 5260 9.97 1170 124 6390 13 518 124 10700 21.8 166095 3980 6.22 530 87 5260 7.52 1390 93 6670 10.2 680 93 10800 16.4 1660321 3610 19 220 309 4210 21.4 965 308 4890 24.8 460 305 8590 43.1 1140160 10.89 3980 10.4 244 154 11.3 5260 13.3 966 154 11.35 6170 15.6 482 152 11.47 10900 27.2 1390106 3980 6.92 478 102 5380 9 1250 102 6650 11.1 567 101 12500 20.6 124080 3980 5.22 620 77 5380 6.78 1400 77 6980 8.8 760 76 13200 16.4 1240279 3760 17.2 380 259 4470 19 1010 280 5080 23.4 450 270 8820 39.3 1140139 12.54 3770 8.6 419 129 13.48 5340 11.3 1050 140 12.48 6360 14.6 456 135 12.92 11200 24.7 141092 3770 5.7 698 86 5530 7.76 1390 92 6780 10.3 610 89 12800 18.8 125069 3780 4.3 811 64 5530 5.85 1620 70 7120 8.16 810 67 14100 15.6 1250240 3920 15.4 360 225 4660 17.2 1020 244 5360 21.5 460 232 9280 35.5 1140120 14.58 3980 7.81 387 112 15.52 4670 8.6 1510 122 14.34 6550 13.1 463 116 15.04 11700 22.4 136079 3980 5.17 714 74 4670 5.7 1620 80 6990 9.25 668 77 13500 17 129060 3980 3.9 850 56 4680 4.3 1620 61 7210 7.2 920 58 14800 14.1 1290214 3980 14 440 193 4850 15.4 1020 215 5680 20.1 450 209 9540 32.9 1140107 16.31 3980 6.99 472 96 18.05 5280 8.36 1370 107 16.26 6790 12 456 104 16.69 12100 20.7 135071 3980 4.63 811 64 5280 5.54 1620 71 7110 8.31 758 69 12600 14.3 181053 3980 3.49 1010 48 5280 4.18 1620 53 7300 6.44 1000 52 12600 10.8 1810201 3980 13.1 510 173 5020 14.2 1020 195 5820 18.6 505 191 9620 30.3 1240100 17.39 3980 6.55 522 86 20.2 5540 7.85 1380 97 17.94 6830 10.9 539 95 18.26 12100 18.9 146066 3980 4.34 867 57 5540 5.2 1620 64 7170 7.6 841 63 12100 12.5 218050 3980 3.27 1020 43 5540 3.92 1620 48 7370 5.89 1080 47 12100 9.46 2180169 3980 11.1 640 162 5110 13.6 1010 170 6110 17.1 480 169 9970 27.8 126084 20.61 3980 5.53 659 81 21.53 5540 7.36 1460 85 20.54 6990 9.76 613 84 20.66 12600 17.5 144056 3980 3.67 1020 53 5540 4.88 1620 56 7270 6.72 962 56 12900 11.9 211042 3980 2.76 1020 40 5540 3.68 1620 42 7480 5.21 1100 42 12900 8.97 2110159 3980 10.4 700 137 5240 11.8 1080 150 6390 15.8 450 150 10200 25.2 134079 22 3980 5.18 714 68 25.51 5540 6.22 1620 75 23.23 7070 8.74 712 75 23.32 12900 15.9 156052 3980 3.43 1080 45 5540 4.12 1620 49 7360 6.02 1080 49 13600 11.1 212039 3980 2.59 1080 34 5540 3.11 1620 37 7570 4.67 1100 37 13600 8.36 2120128 3980 8.38 840 128 5300 11.2 1160 129 6610 14.1 450 123 10400 21.2 156064 27.3 3980 4.18 903 64 27.24 5540 5.82 1620 64 26.93 7170 7.65 837 61 28.27 13200 13.4 183042 3980 2.77 1080 42 5540 3.86 1620 43 7470 5.28 1140 41 14800 9.94 211032 3980 2.09 1080 32 5540 2.91 1620 32 7680 4.09 1180 30 14800 7.5 2110108 3980 7.11 910 103 5450 9.26 1240 108 6800 12.2 460 106 10700 18.6 184054 32.19 3980 3.55 1060 51 33.8 5540 4.7 1620 54 32.12 7290 6.53 994 53 32.97 13500 11.7 204036 3980 2.35 1080 34 5540 3.11 1620 36 7600 4.51 1080 35 15000 8.68 238027 3980 1.77 1080 25 5540 2.35 1620 27 7680 3.44 1100 26 15000 6.55 238099 3980 6.5 920 87 5530 7.98 1360 99 6890 11.3 550 96 10900 17.3 190049 35.25 3980 3.25 1080 43 39.86 5540 3.99 1620 49 35.17 7360 6.03 1080 48 36.21 13700 10.9 213032 3980 2.15 1080 29 5540 2.64 1620 32 7670 4.16 1050 32 15000 7.91 260024 3980 1.62 1080 21 5540 1.99 1620 24 7680 3.14 1050 24 15000 5.97 260081 3700 4.95 980 80 5540 7.3 1450 82 7010 9.59 720 78 11100 14.5 195040 43.2 3700 2.47 1230 40 43.64 5540 3.65 1620 41 42.21 7500 5.12 1130 39 44.38 14100 9.11 247026 3820 1.69 1160 26 5540 2.42 1620 27 7680 3.48 1050 26 15000 6.45 311020 3920 1.31 1160 20 5540 1.82 1450 20 7680 2.62 1050 19 15000 4.87 311072 3350 4.02 1060 65 4590 4.95 1600 72 6190 7.37 910 72 11200 13.4 200036 48.15 3360 2.01 1410 32 53.49 4580 2.47 1620 36 48.56 6200 3.69 1670 36 48.46 14200 8.42 263024 3360 1.33 1410 21 4740 1.69 1620 23 6200 2.44 1670 23 15000 5.92 325018 3360 1.01 1060 16 4850 1.31 1600 18 6200 1.84 1670 18 15000 4.46 325064 2380 2.56 1230 58 4150 4.02 1620 64 5260 5.65 1000 62 11300 11.7 204032 54 2390 1.28 1620 29 59.61 4160 2.01 1620 32 53.96 5270 2.83 2060 31 55.8 13500 6.97 323021 2390 0.847 1620 19 4160 1.33 1620 21 5270 1.87 2060 20 13700 4.71 373016 2390 0.639 1620 14 4160 1.01 1620 16 5270 1.41 2060 15 13700 3.55 3730

52 2950 2.56 162026 66.86 2960 1.28 162017 2960 0.847 162013 2960 0.639 1620

97

98


DOUBLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0921


1 . 4

1 . 8

2 . 2

2 . 5

2 . 8

3 . 2

3 . 6

4 . 0

4 . 5

5 . 0

7 . 1

8 . 0

9 . 0

6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)

M1021

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1321

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1421

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)


5 . 6

6 . 3

1 0 .

1 1 .

350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875

2366 3750 146 2290 2426 6350 253 27901183 1.479 4770 92.1 2570 1213 1.442 6390 127 3460784 5480 70 2950 804 6390 83.9 4030591 6040 58 2950 606 6390 63.3 40301718 4430 125 2290 1737 8780 249 2790859 2.036 5620 78.7 2840 868 2.015 8940 127 3750569 6460 59.8 3260 575 8950 83.9 4390429 7110 49.6 3260 434 8960 63.3 43901533 4690 118 2290 1597 9150 238 2790766 2.282 5940 74.3 2940 798 2.191 9730 127 3820508 6840 56.4 3370 529 9740 83.9 4480383 7520 46.8 3370 399 9750 63.3 44801366 4950 111 2290 1406 9710 223 2790683 2.562 6270 69.8 3050 703 2.489 11100 127 3920452 7220 53.1 3500 466 11100 83.9 4610341 7940 44 3500 351 11100 63.3 46101178 7530 146 2290 1169 13200 253 2790 1205 15400 304 5400 1212 22300 443 8100589 2.969 9570 92.1 2770 584 2.992 13200 127 4210 602 2.904 15400 152 7810 606 2.888 22300 222 10100390 11000 70 3100 387 13200 83.9 4940 399 15400 101 8930 401 22300 147 11500294 12100 58 3100 292 13200 63.3 4940 301 15400 75.9 8390 303 22300 111 115001060 5570 96.6 2290 1079 10800 191 2790 1097 16900 304 5400 1077 25100 443 8100530 3.301 7060 60.9 3300 539 3.242 13700 120 3940 548 3.189 16900 152 7990 538 3.247 25100 222 10300351 8120 46.3 3600 357 13900 80.7 4910 363 16900 101 9130 357 25100 147 11800265 8930 38.4 3600 269 13900 60.8 4910 274 16900 75.9 9130 269 25100 111 11800948 5740 89.1 2290 1000 11000 180 2790 961 19200 304 5400 915 29400 443 8100474 3.688 7280 56.2 3430 500 3.5 13900 113 4100 480 3.638 19200 152 8250 457 3.822 29500 222 10700314 8360 42.7 3620 331 13900 74.7 5030 318 19300 101 9380 303 29500 147 12200237 9200 35.4 3620 250 13900 56.3 5030 240 19300 75.9 9380 228 29500 111 12200856 8880 125 2290 837 17800 244 2790 869 21400 304 5400 868 31200 443 8100428 4.088 11300 78.7 2890 418 4.179 18500 127 4140 434 4.025 21400 152 8430 434 4.029 31200 222 10900283 12900 59.8 2840 277 18500 83.9 5040 288 21400 101 9430 287 31200 147 12300214 14200 49.6 2840 209 18500 63.3 5040 217 21400 75.9 9430 217 31200 111 12300763 9410 118 2290 770 18400 232 2790 791 23500 304 5400 771 35100 443 8100381 4.582 11900 74.3 2850 385 4.545 20100 127 3960 395 4.421 23500 152 8540 385 4.537 35100 222 11200253 13700 56.4 2730 255 20100 83.9 4720 262 23500 101 9380 255 35200 147 12400190 15100 46.8 2730 192 20200 63.3 4720 197 23500 75.9 9380 192 35100 111 12400689 11000 125 2290 708 18900 220 2790 694 26600 304 5400 656 41100 443 8100344 5.073 14000 78.7 2550 354 4.938 21800 127 3920 347 5.042 26700 152 8660 328 5.333 41200 222 11300228 16000 59.8 2400 234 21900 83.9 4560 230 26700 101 9320 217 41200 147 12200172 17700 49.6 2400 177 21900 63.3 4560 173 26700 75.9 9320 164 41200 111 12200615 11700 118 2290 651 19600 209 2790 631 29300 304 5400 582 46300 443 8100307 5.686 14800 74.3 2430 325 5.37 23800 127 3530 315 5.538 29400 152 8530 291 6.005 46400 222 11000204 17000 56.4 2300 215 23800 83.9 4180 209 29400 101 9210 193 46400 147 12000153 18700 46.8 2300 162 23800 63.3 4180 157 29400 75.9 9210 145 46400 111 12000528 11200 96.6 2290 520 21300 182 2790 563 33000 304 5400 534 50700 443 8100264 6.628 14100 60.9 2550 260 6.724 26300 112 2990 281 6.21 33000 152 8260 267 6.548 50700 222 11100175 16300 46.3 2490 172 29700 83.6 2820 186 33000 101 9020 177 50700 147 12200132 17900 38.4 2490 130 29900 63.3 2820 140 33100 75.9 9020 133 50700 111 12200472 11500 89.1 2290 482 21900 173 2790 508 36600 304 5400 481 55500 437 8100236 7.404 14600 56.2 2540 241 7.26 27000 106 2900 254 6.879 36600 152 8040 240 7.27 56300 222 10800156 16700 42.7 2520 159 30600 79.7 2760 168 36600 101 8880 159 56300 147 11900118 18400 35.4 2520 120 32200 63.3 2760 127 36600 75.9 8880 120 56300 111 11900425 13900 96.6 2290 440 22600 163 2790 449 41200 304 5400 403 67000 443 8100212 8.224 17400 60.5 2110 220 7.945 27800 100 3060 224 7.779 41200 152 7830 201 8.667 67000 222 9620141 19700 45.3 2100 145 31500 75.1 2990 149 41200 101 8770 133 67000 147 11000106 21500 37.1 2100 110 34300 61.6 2990 112 41300 75.9 8770 100 67000 111 11000380 14300 89.1 2290 408 23200 155 2790 406 42700 284 5500 363 73300 437 8100190 9.188 18100 56.2 2100 204 8.578 28600 95.5 2980 203 8.618 45700 152 7530 181 9.623 74400 222 9080126 20500 42.2 2050 135 32400 71.5 2940 134 45700 101 8550 120 74400 147 1050095 22300 34.6 2050 102 35200 58.7 2940 101 45700 75.9 8550 90 74400 111 10500340 12900 72 2290 330 25000 135 2790 353 45800 264 5800 347 61000 347 8100170 10.27 16300 45.4 2500 165 10.59 30800 83 2630 176 9.891 52600 152 6930 173 10.06 77900 222 9370112 18800 34.5 2440 109 33400 59.6 2910 117 52600 101 8000 115 77900 147 1080085 20600 28.6 2440 82 33400 45 2910 88 52600 75.9 8000 86 77900 111 10800299 13400 65.5 2290 292 26100 125 2700 312 49400 252 6100 306 63100 317 8100149 11.71 16900 41.3 2530 146 11.98 32100 76.5 2550 156 11.2 52500 134 7250 153 11.43 83000 208 923099 19500 31.4 2460 96 33400 52.7 3240 103 52500 88.7 8350 101 88400 147 1010074 21400 26 2460 73 33400 39.7 3240 78 52500 66.9 8350 76 88400 111 10100

0107

Note: Input Power, Pm may exceed thermal limit,Check thermal power page 108

99


DOUBLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0921


1 2 .

1 4 .

1 6 .

1 8 .

2 0 .

2 2 .

2 5 .

2 8 .

3 2 .

3 6 .

5 0 .

5 6 .

6 3 .

6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)

M1021

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1321

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1421

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)


4 0 .

4 5 .

7 1 .

350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875

0107

274 16000 72 1990 279 26400 121 2700 282 44900 208 6970 262 80500 347 8170137 12.74 20200 45.3 1990 139 12.51 32500 74.3 2810 141 12.39 55300 128 7330 131 13.32 90500 195 828091 22900 34 1930 92 36800 55.7 2710 93 56200 86.2 8350 87 90500 129 985068 24900 27.9 1930 69 39100 44.6 2710 70 56200 65 8350 65 90500 97.5 9850240 16600 65.5 1930 247 27500 112 2700 249 49200 201 6970 231 83400 317 8360120 14.53 21000 41.3 1990 123 14.16 33900 68.5 2740 124 14.03 55700 114 7620 115 15.13 91900 174 859079 23900 31.1 1890 81 38400 51.3 2620 82 55700 75.4 8760 76 91900 116 1020060 25300 24.8 1890 61 39100 39.4 2620 62 55700 56.8 8760 57 91900 87.2 10200210 14500 50 1890 213 28900 101 2760 219 50800 182 6970 213 68500 240 8360105 16.59 18300 31.5 2700 106 16.43 33400 58.1 2990 109 15.97 54900 98.4 7910 106 16.43 90300 158 972069 21000 24 2780 70 33400 38.5 4100 72 54900 65.2 9080 70 98200 114 1040052 23100 19.9 2780 53 33400 29 4100 54 54900 49.2 9080 53 98200 85.8 10400189 14700 45.5 2430 191 29300 91.9 2710 194 54800 175 7550 193 70700 225 900094 18.43 18500 28.7 2820 95 18.25 33400 52.3 3260 97 18 54900 87.3 8250 96 18.11 93300 148 962062 21300 21.8 3040 63 33400 34.7 4550 64 54900 57.8 9570 64 98200 103 1090047 23400 18.1 3040 47 33400 26.1 4550 48 54900 43.6 9570 48 98200 77.8 10900169 18000 50 2100 180 30500 90.2 2400 174 50000 144 7600 160 90500 240 922084 20.59 22700 31.5 2110 90 19.41 37600 55.4 2580 87 20 56200 80.8 8540 80 21.75 93800 124 978056 25300 23.2 2570 59 39100 38.2 3580 57 56200 53.5 10100 53 93800 82.2 1200042 25300 17.5 2570 45 39100 28.8 3580 43 56200 40.4 10100 40 93800 62 12000153 18200 45.5 2200 162 31600 84 2400 155 53600 137 7650 145 93400 225 922076 22.87 23000 28.7 2290 81 21.57 38900 51.6 2510 77 22.55 56200 71.6 8880 72 23.97 95300 115 998050 25300 20.9 2930 53 39100 34.4 4090 51 56200 47.5 10700 48 95300 75.9 1240038 25300 15.8 2930 40 39100 25.9 4090 38 56200 35.8 10700 36 95300 57.2 12400134 15600 34.4 2475 134 31200 68.7 2710 137 54900 124 7700 134 72900 161 925067 26.04 19700 21.6 3310 67 26.03 33400 36.7 4290 68 25.45 54900 62 9260 67 26.07 93400 103 1120044 22600 16.5 3790 44 33400 24.3 6290 45 54900 41.1 11300 44 93400 68.4 1390033 23400 12.8 3790 33 33400 18.4 6290 34 54900 31 11300 33 93400 51.6 13900121 15800 31.4 2500 116 31700 60.8 2710 123 54900 112 8130 123 74700 152 925060 28.74 19900 19.8 3550 58 29.99 33400 31.9 4950 61 28.35 54900 55.8 9770 61 28.25 88300 90 1220040 22900 15.1 4070 38 33400 21.1 7040 40 54900 36.9 11900 41 88300 59.6 1500030 23400 11.6 4070 29 33400 15.9 7040 30 54900 27.9 11900 30 88300 45 15000108 19300 34.4 2560 113 35300 65.9 2900 109 55700 101 8450 101 94300 158 940054 32.31 24400 21.6 2960 56 30.76 39100 36.4 3820 54 31.89 56200 50.9 10300 50 34.51 94300 79 1220035 25300 14.9 4170 37 39100 24.1 5930 36 56200 33.7 12500 33 94300 52.3 1530027 25300 11.2 4170 28 39100 18.2 5930 27 56200 25.4 12500 25 94300 39.5 1530098 19500 31.4 2560 98 36900 59.9 2920 98 56200 91.6 8830 93 95600 148 968049 35.67 24700 19.8 3210 49 35.44 39100 31.6 4510 49 35.52 56200 45.8 10900 46 37.39 95600 73.8 1270032 25300 13.4 4560 32 39100 21 6730 32 56200 30.3 13100 31 95600 48.9 1570024 25300 10.1 4560 24 39100 15.8 6730 24 56200 22.9 13100 23 95600 36.9 1570086 21800 31.2 2600 94 36800 57.1 2960 89 52500 78 9210 88 82100 121 981043 40.25 21800 15.6 4570 47 37.06 36800 28.6 5630 44 39.01 56700 42.1 10900 44 39.42 86600 63.6 1600028 21800 10.3 6140 31 36800 18.9 7870 29 57200 28.1 13100 29 89400 43.6 1890021 21800 7.79 6140 23 36800 14.3 7870 22 57200 21.2 13100 22 89500 32.9 1890078 21800 28.2 2800 81 36800 49.6 3310 80 53200 71 9450 81 82600 112 1030039 44.44 21800 14.1 4930 40 42.7 36800 24.8 6370 40 43.45 57200 38.2 11400 40 42.71 87200 59.1 1660026 21800 9.35 6320 27 36800 16.4 8720 26 57200 25.3 13700 27 89500 40.2 1950019 21900 7.05 6320 20 36900 12.4 8720 20 57200 19.1 13700 20 89500 30.3 1950071 20200 23.7 3300 73 37600 45.2 3350 71 50100 59.5 9980 68 71900 81.1 1110035 49.07 25300 14.8 4200 36 47.93 37700 22.6 6480 35 48.63 50100 29.7 13200 34 51.27 72000 40.6 1760023 25300 9.8 5610 24 37700 15 8930 23 50100 19.7 14600 22 72000 26.9 2050017 25300 7.39 5610 18 37700 11.3 8930 17 50100 14.9 14600 17 72000 20.3 2050063 19100 19.9 3530 67 34200 38.3 3600 67 53300 59.5 10120 60 74700 75.2 1170031 55.18 18000 9.37 6410 33 51.49 34200 19.2 7810 33 51.74 53300 29.7 13200 30 57.52 74700 37.6 1820021 17400 6.02 6420 22 34300 12.7 9620 22 53300 19.7 14600 20 74800 24.9 2050015 17100 4.46 6420 16 34300 9.59 9620 16 53400 14.9 14600 15 74800 18.8 2050057 21800 20.6 3825 60 36800 36.8 3800 58 55500 54 10600 59 82000 81.1 1260028 61.13 21800 10.3 6170 30 57.75 36800 18.4 8060 29 59.49 57200 27.8 13200 29 58.57 82100 40.6 1910018 21900 6.81 6320 20 36900 12.2 9520 19 57200 18.4 14500 19 82100 26.9 2050014 21900 5.14 6320 15 36900 9.2 9520 14 57200 13.9 14500 14 82100 20.3 2050050 21800 18.4 4000 56 36800 34.3 4800 55 55700 51 11400 53 85100 75.2 1350025 68.74 21800 9.17 6320 28 62.05 36800 17.2 8490 27 63.29 57200 26.1 13500 26 65.7 85200 37.6 1970016 21700 6.02 6320 18 36900 11.4 9520 18 57200 17.3 14500 17 85200 24.9 2050012 21300 4.46 6320 14 36900 8.58 9520 13 57200 13.1 14500 13 85200 18.8 20500

100

TRIPLE REDUCTION RATINGSSIZES M01 - M04

TRIPLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0132


5 6 .

6 3 .

7 1 .

8 0 .

1 0 0

1 1 2

1 2 5

1 6 0

1 8 0

2 0 0

6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)

M0232

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0332

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0432

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)


3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

59 794 0.806 349 61 1350 1.39 899 61 1790 1.84 680 59 2440 2.46 1290

29 58.46 795 0.4 349 30 57.03 1410 0.726 899 30 57.03 1850 0.948 680 29 58.38 2870 1.43 1620

19 795 0.265 348 20 1410 0.481 899 20 1850 0.627 680 19 2990 0.988 1610

14 795 0.199 348 15 1410 0.362 899 15 1850 0.473 680 14 2990 0.745 1610

54 794 0.73 348 55 1380 1.29 899 55 1850 1.72 680 54 2490 2.27 1390

27 64.45 795 0.362 349 27 62.87 1410 0.657 899 27 62.87 1850 0.858 680 27 64.29 2960 1.34 1620

17 795 0.24 348 18 1410 0.435 899 18 1850 0.568 680 18 2990 0.896 1610

13 795 0.181 348 13 1410 0.328 899 13 1850 0.428 680 13 2990 0.676 1610

49 794 0.663 348 50 1410 1.19 899 50 1850 1.56 680 47 2570 2.03 1570

24 70.93 795 0.329 349 25 69.19 1410 0.598 899 25 69.19 1850 0.78 680 23 73.95 2990 1.18 1610

16 795 0.218 348 16 1410 0.395 899 16 1850 0.516 680 15 2990 0.78 1610

12 795 0.164 348 12 1410 0.298 899 12 1850 0.389 680 11 2990 0.588 1610

42 794 0.566 348 43 1410 1.02 899 43 1850 1.34 680 43 2620 1.9 1610

21 83.1 795 0.281 348 21 81.07 1410 0.51 899 21 81.07 1850 0.666 680 21 80.4 2990 1.08 1610

13 795 0.186 348 14 1410 0.338 899 14 1850 0.441 680 14 2990 0.718 1610

10 795 0.14 348 10 1410 0.255 899 10 1850 0.333 680 10 2990 0.541 1610

35 794 0.472 348 35 1410 0.855 899 35 1850 1.12 680 36 2720 1.65 1610

17 99.7 795 0.235 348 17 97.26 1410 0.426 899 17 97.26 1850 0.556 680 18 96.52 2990 0.904 1610

11 795 0.155 348 11 1410 0.282 899 11 1850 0.368 680 12 2990 0.598 1610

8 795 0.117 348 8 1410 0.213 899 8 1850 0.278 680 9 2990 0.451 1610

30 795 0.405 348 30 1410 0.734 899 30 1850 0.957 680 30 2860 1.45 1610

15 116.2 795 0.202 348 15 113.4 1410 0.366 899 15 113.4 1850 0.478 680 15 115.8 2990 0.755 1610

9 795 0.133 348 10 1410 0.242 899 10 1850 0.316 680 10 2990 0.5 1610

7 795 0.1 348 7 1410 0.183 899 7 1850 0.238 680 7 2990 0.377 1610

27 795 0.365 348 27 1410 0.661 899 27 1850 0.863 680 26 2980 1.34 1610

13 129.1 795 0.182 348 13 126 1410 0.33 899 13 126 1850 0.43 680 13 130.5 2990 0.67 1610

8 795 0.12 348 9 1410 0.218 899 9 1850 0.285 680 8 2990 0.444 1610

6 795 0.091 348 6 1410 0.165 899 6 1850 0.215 680 6 2990 0.335 1610

22 795 0.302 348 23 1410 0.548 899 23 1850 0.715 680 23 2990 1.15 1610

11 155.5 795 0.15 348 11 151.7 1410 0.273 899 11 151.7 1850 0.357 680 11 151.7 2990 0.576 1610

7 795 0.1 348 7 1410 0.181 899 7 1850 0.236 680 7 2990 0.381 1610

5 795 0.075 348 5 1410 0.136 899 5 1850 0.178 680 5 2990 0.287 1610

19 795 0.264 348 20 1410 0.478 899 20 1850 0.624 680 20 2990 1.02 1610

9 178.2 795 0.131 348 10 173.9 1410 0.239 899 10 173.9 1850 0.312 680 10 172.2 2990 0.508 1610

6 795 0.087 348 6 1410 0.158 899 6 1850 0.206 680 6 2990 0.336 1610

4 795 0.066 348 5 1410 0.119 899 5 1850 0.156 680 5 2990 0.254 1610

17 795 0.232 348 17 1410 0.422 899 17 1850 0.55 680 17 2990 0.897 1610

8 202.6 795 0.116 348 8 197.6 1410 0.21 899 8 197.6 1850 0.275 680 8 195.8 2990 0.447 1610

5 795 0.077 348 5 1410 0.139 899 5 1850 0.182 680 5 2990 0.296 1610

4 795 0.058 348 4 1410 0.105 899 4 1850 0.137 680 4 2990 0.223 1610

0107


TRIPLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0532


6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)

M0632

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0732

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0832

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)


3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

59 3800 3.8 1060 59 5450 5.41 995 58 10900 10.7 2040

29 58.38 3980 1.98 1100 29 58.95 6310 3.11 1630 29 60.33 13400 6.48 3450

19 3980 1.31 1100 19 7190 2.35 1260 19 15000 4.8 3250

14 3980 0.99 1100 14 7680 1.89 1260 14 15000 3.62 3250

54 3690 3.35 1080 48 4700 3.8 1620 55 5520 5.14 1080 53 11200 9.98 2040

27 64.29 3980 1.8 1100 24 72.28 5370 2.16 1620 27 62.83 6400 2.96 1590 26 66.02 13800 6.08 3540

18 3980 1.19 1100 16 5540 1.47 1620 18 7340 2.25 1190 17 15000 4.39 3250

13 3980 0.898 1100 12 5540 1.11 1620 13 7680 1.77 1190 13 15000 3.31 3250

47 3790 2.99 1100 43 4570 3.35 1620 47 5720 4.5 1130 46 11600 9.14 2130

23 73.95 3980 1.57 1100 21 79.6 5260 1.92 1620 23 74.47 6780 2.65 1430 23 74.69 14300 5.58 3530

15 3980 1.04 1100 14 5540 1.34 1620 15 7680 1.99 1050 15 15000 3.88 3250

11 3980 0.781 1100 10 5540 1.01 1620 11 7680 1.5 1050 11 15000 2.92 3250

43 3860 2.8 1100 38 4700 2.99 1620 44 5800 4.27 1130 41 12000 8.39 2470

21 80.4 3980 1.44 1100 19 91.56 5460 1.73 1620 22 79.51 6920 2.53 1370 20 84.31 14800 5.12 3330

14 3980 0.954 1100 12 5540 1.16 1620 14 7680 1.86 1050 13 15000 3.44 3250

10 3980 0.719 1100 9 5540 0.878 1620 11 7680 1.4 1050 10 15000 2.59 3250

36 3980 2.41 1100 35 4780 2.8 1620 35 6070 3.6 1130 34 12700 7.33 2630

18 96.52 3980 1.2 1100 17 99.54 5540 1.62 1620 17 98.66 7440 2.2 1150 17 102.2 15000 4.29 3250

12 3980 0.795 1100 11 5540 1.07 1620 11 7680 1.5 1050 11 15000 2.84 3250

9 3980 0.6 1100 8 5540 0.808 1620 8 7680 1.13 1050 8 15000 2.14 3250

30 3980 2.01 1100 29 4950 2.42 1620 30 6290 3.16 1050 29 13300 6.58 3250

15 115.8 3980 1 1100 14 119.5 5540 1.35 1620 15 116.3 7680 1.92 1050 14 119.2 15000 3.68 3250

10 3980 0.664 1100 9 5540 0.894 1620 9 7680 1.27 1050 9 15000 2.44 3250

7 3980 0.501 1100 7 5540 0.674 1620 7 7680 0.961 1050 7 15000 1.84 3250

26 3980 1.79 1100 24 5180 2.11 1620 27 6430 2.96 1050 26 13700 6.16 3250

13 130.5 3980 0.891 1100 12 143.4 5540 1.13 1620 13 127.4 7680 1.76 1050 13 130.9 15000 3.35 3250

8 3980 0.59 1100 8 5540 0.746 1620 9 7680 1.16 1050 8 15000 2.22 3250

6 3980 0.445 1100 6 5540 0.563 1620 6 7680 0.878 1050 6 15000 1.67 3250

23 3980 1.53 1100 21 5340 1.93 1620 22 6880 2.58 1050 21 14600 5.33 3250

11 151.7 3980 0.765 1100 10 161.6 5540 1 1620 11 156.1 7680 1.44 1050 10 160.4 15000 2.73 3250

7 3980 0.507 1100 7 5540 0.663 1620 7 7680 0.952 1050 7 15000 1.81 3250

5 3980 0.382 1100 5 5540 0.5 1620 5 7830 0.731 1050 5 15000 1.36 3250

20 3980 1.35 1100 18 5540 1.72 1620 20 7140 2.4 1050 19 15000 5.01 3250

10 172.2 3980 0.675 1100 9 187.8 5540 0.86 1620 10 174 7680 1.29 1050 9 175.2 15000 2.51 3250

6 3980 0.447 1100 6 5540 0.569 1620 6 7680 0.855 1050 6 15000 1.66 3250

5 3980 0.337 1100 4 5540 0.429 1620 5 7860 0.659 1050 4 15000 1.25 3250

17 3980 1.19 1100 16 5540 1.52 1620 17 7410 2.23 1050 17 15000 4.38 3250

8 195.8 3980 0.595 1100 8 213.2 5540 0.758 1620 8 195.2 7680 1.15 1050 8 201.8 15000 2.18 3250

5 3980 0.394 1100 5 5540 0.502 1620 5 7780 0.773 1010 5 15000 1.45 3250

4 3980 0.297 1100 4 5540 0.379 1620 4 7860 0.589 1050 4 15300 1.11 3250

14 5540 1.34 1620

7 242.4 5540 0.668 1620

4 5540 0.443 1620

3 5540 0.334 1620

5 6 .

6 3 .

7 1 .

8 0 .

1 0 0

1 1 2

1 2 5

1 6 0

1 8 0

2 0 0

2 2 5

0107

101


TRIPLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0931


4 0 .

4 5 .

5 0 .

5 6 .

6 3 .

7 1 .

8 0 .

9 0 .

1 0 0

1 1 2

1 6 0

1 8 0

2 0 0

6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)

M1031

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1331

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1431

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)


1 2 5

1 4 0

2 2 5

2 5 0

350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875

87 35900 52.5 8540 84 62100 87.9 978043 39.93 46800 34 12400 42 41.36 80300 56.5 1570029 50800 24.4 14200 28 89700 41.8 1780021 53700 19.5 14500 21 94300 33.1 1780079 44000 58.5 8880 72 77700 94.6 998039 44.18 52700 34.8 12400 36 48.21 97300 58.9 1430026 56200 24.5 14400 24 97300 39 1760019 56200 18.5 14500 18 97300 29.4 1760069 44700 52.5 9260 63 82000 87.9 1120034 50.02 53900 31.4 13000 31 54.75 97300 51.9 1530023 56200 21.7 14500 21 97300 34.4 1870017 56200 16.3 14500 15 97300 25.9 18700

58 17600 17.2 2960 58 27800 27.1 3820 61 43500 44.7 9770 58 71600 70.6 1220029 59.85 21600 10.5 5690 29 60.23 33400 16.1 8680 30 56.93 52900 27 13700 29 59.46 89700 44 1740019 23400 7.49 5780 19 33400 10.7 9620 20 54900 18.5 14600 19 96700 31.4 2020014 23400 5.64 5780 14 33400 8.02 9620 15 54900 14 14500 14 98200 24 2030052 18100 15.9 3210 52 29100 25.4 4510 54 44500 40.5 12500 53 74500 66.6 1270026 66.49 22300 9.73 5920 26 66.93 33400 14.5 9190 27 64.17 52900 24 14400 26 65.55 91500 40.7 1800017 23400 6.75 5780 17 33400 9.59 9620 18 54900 16.4 14600 17 98200 28.9 2030013 23400 5.08 5780 13 33400 7.22 9620 13 54900 12.4 14500 13 98200 21.8 2030047 19600 15.5 4570 49 30400 25.1 5630 49 50600 41.6 13500 44 94600 70.6 1600023 74.26 24200 9.45 5930 24 71.17 37500 15.3 8880 24 71.32 56200 23 14500 22 78.7 97300 36.2 1830015 25300 6.54 5610 16 39100 10.6 9350 16 56200 15.2 14500 14 97300 23.9 2030011 25300 4.93 5610 12 39100 7.95 9350 12 56200 11.5 14500 11 97300 18.1 2030042 20300 14.4 4700 44 31400 23.3 6100 43 51700 37.8 12500 40 97300 65.9 1400021 82.51 24900 8.78 5710 22 79.08 38700 14.2 9230 21 80.39 56200 20.4 14500 20 86.76 97300 32.8 1920014 25300 5.89 5610 14 39100 9.5 9350 14 56200 13.5 14500 13 97300 21.7 2030010 25300 4.44 5610 11 39100 7.16 9350 10 56200 10.2 14500 10 97300 16.4 2030037 20100 12.5 4800 36 32400 19.8 6480 38 50700 32.7 12800 37 85600 53.3 1430018 93.92 23400 7.23 5780 18 95.44 33400 10.2 9620 19 90.75 54900 17.6 14600 18 94.35 98200 30.4 2030012 23400 4.78 5780 12 33400 6.73 9620 12 54900 11.7 14600 12 98200 20.2 203009 23400 3.6 5780 9 33400 5.07 9620 9 54900 8.81 14500 9 98200 15.2 2030033 20700 11.6 5610 31 33400 17.7 7810 34 51700 30 13000 34 88100 50.5 1530016 103.7 23400 6.54 5780 15 110 33400 8.83 9620 17 101.1 54900 15.9 14600 17 102.2 98200 28.1 2030011 23400 4.33 5780 10 33400 5.84 9620 11 54900 10.5 14600 11 98200 18.6 203008 23400 3.26 5780 7 33400 4.4 9620 8 54900 7.92 14500 8 98200 14 2030030 22500 11.3 5610 31 35000 18.1 8500 30 55200 28.6 14500 28 97300 45.9 1750015 116.5 25300 6.31 5610 15 112.8 39100 10.1 9350 15 113.7 56200 14.5 14500 14 124.9 97300 22.9 203009 25300 4.17 5610 10 39100 6.67 9350 10 56200 9.59 14500 9 97300 15.1 203007 25300 3.15 5610 7 39100 5.02 9350 7 56200 7.23 14500 7 97300 11.4 2030027 23200 10.5 5610 26 36500 16.4 8680 27 56200 26.1 14500 25 97300 42.3 1830013 128.7 25300 5.71 5610 13 129.9 39100 8.75 9350 13 126.6 56200 13 14500 12 135.3 97300 21.1 203009 25300 3.78 5610 8 39100 5.79 9350 9 56200 8.62 14500 8 97300 14 203006 25300 2.85 5610 6 39100 4.36 9350 6 56200 6.5 14500 6 97300 10.5 2030024 21800 8.86 5610 25 36800 15.9 8880 25 57200 24.3 14500 24 89500 37.1 1900012 145.2 21900 4.4 6320 12 135.9 36900 7.92 9520 12 139.1 57200 12.1 14500 12 142.7 89500 18.5 204007 21900 2.91 6320 8 36900 5.24 9520 8 57200 8.01 14500 8 89500 12.2 204006 21900 2.19 6320 6 36900 3.95 9520 6 57200 6.03 14500 6 89500 9.22 2030021 21800 8.01 5610 22 36800 13.8 9250 22 57200 21.8 14500 22 89500 34.2 2040010 160.3 21900 3.98 6320 11 156.6 36900 6.88 9520 11 154.9 57200 10.9 14500 11 154.6 89500 17 204007 21900 2.63 6320 7 36900 4.55 9520 7 57200 7.2 14500 7 89500 11.3 204005 21900 1.98 6320 5 36900 3.43 9520 5 57200 5.42 14500 5 89500 8.5 2030019 25300 8.35 5610 19 39100 13 9350 20 56200 19 14500 18 97300 30.8 204009 177 25300 4.16 5610 9 175.7 39100 6.48 9350 10 173.4 56200 9.49 14500 9 185.6 97300 15.4 203006 25300 2.75 5610 6 39100 4.29 9350 6 56200 6.28 14500 6 97300 10.2 203004 25300 2.07 5610 4 39100 3.23 9350 5 56200 4.74 14500 4 97300 7.67 2030017 25300 7.44 5610 18 39100 12.1 9350 18 56200 17.9 14500 16 97300 27.5 204008 199 25300 3.71 5610 9 188.8 39100 6.04 9350 9 184.5 56200 8.91 14500 8 208.2 97300 13.7 203005 25300 2.45 5610 6 39100 4 9350 6 56200 5.9 14500 5 97300 9.09 203004 25300 1.85 5610 4 39100 3.02 9350 4 56200 4.45 14500 4 97300 6.85 2030015 21900 5.83 5610 16 36900 10.2 9520 16 57200 15.9 14500 16 89500 24.9 204007 220.5 21900 2.9 6320 8 211.8 36900 5.09 9520 8 212.1 57200 7.92 14500 8 212 89500 12.4 204005 21900 1.92 6320 5 36900 3.37 9520 5 57200 5.24 14500 5 89500 8.22 204003 21900 1.45 6320 4 37600 2.59 9520 4 57200 3.95 14500 4 89500 6.19 2030014 21900 5.19 5610 15 36900 9.53 9520 15 57200 14.9 14500 14 89500 22.2 204007 248 21900 2.58 6320 7 227.5 36900 4.75 9520 7 225.6 57200 7.44 14500 7 237.8 89500 11.1 204004 21900 1.71 6320 5 36900 3.14 9520 5 57200 4.92 14500 4 89500 7.34 204003 21900 1.29 6320 3 37800 2.43 9520 3 57200 3.71 14500 3 89500 5.53 20300

0107

102

QUADRUPLE REDUCTION RATINGSSIZES M03 - M07

QUADRUPLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0342


6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)


0107

M0442

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0542

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0642

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0742

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875

2 2 5

2 5 0

2 8 0

3 0 0

3 6 0

4 0 0

4 5 0

5 0 0

6 5 0

7 3 0

8 6 0

1 0 C

1 1 C

1 3 C

1 5 C

1 8 C

2 0 C

2 4 C

2 7 C

14.90 1859 0.462 710 15.03 3009 0.756 1620 15.03 3983 1.000 1620 15.284 7655 1.954 16207.448 235.0 1859 0.231 710 7.517 232.8 3009 0.378 1620 7.517 232.8 3983 0.500 1620 7.642 229.0 7655 0.977 16204.937 1859 0.153 710 4.983 3009 0.250 1620 4.983 3983 0.331 1620 5.065 7655 0.648 16203.724 1859 0.116 710 3.758 3009 0.189 1620 3.758 3983 0.250 1620 3.821 7655 0.489 162013.39 1859 0.416 710 13.44 3009 0.675 1620 13.44 3983 0.894 1620 13.478 7655 1.723 16207.448 261.4 1859 0.208 710 6.719 260.5 3009 0.338 1620 6.719 260.5 3983 0.447 1620 6.739 259.7 7655 0.862 16204.438 1859 0.138 710 4.453 3009 0.224 1620 4.453 3983 0.296 1620 4.467 7655 0.571 16203.348 1859 0.104 710 3.359 3009 0.169 1620 3.359 3983 0.223 1620 3.370 7655 0.431 162012.16 1859 0.377 710 12.61 3009 0.634 1620 12.61 3983 0.839 1620 12.825 5487 1.175 1620 12.220 7655 1.562 16207.448 287.8 1859 0.189 710 6.304 277.6 3009 0.317 1620 6.304 277.6 3983 0.419 1620 6.412 272.9 5487 0.588 1620 6.110 286.4 7655 0.781 16204.030 1859 0.125 710 4.178 3009 0.210 1620 4.178 3983 0.278 1620 4.251 5487 0.390 1620 4.050 7655 0.518 16203.040 1859 0.094 710 3.152 3009 0.158 1620 3.152 3983 0.210 1620 3.206 5487 0.294 1620 3.055 7655 0.391 162011.03 1859 0.342 710 11.45 3009 0.575 1620 11.45 3983 0.761 1620 11.150 5487 1.022 1620 11.097 7655 1.419 16207.448 317.3 1859 0.171 710 5.724 305.7 3009 0.288 1620 5.724 305.7 3983 0.381 1620 5.575 313.9 5487 0.511 1620 5.548 315.4 7655 0.709 16203.655 1859 0.113 710 3.794 3009 0.191 1620 3.794 3983 0.252 1620 3.695 5487 0.339 1620 3.678 7655 0.470 16202.757 1859 0.086 710 2.862 3009 0.144 1620 2.862 3983 0.190 1620 2.787 5487 0.255 1620 2.774 7655 0.355 16209.59 1859 0.298 710 9.66 3009 0.485 1620 9.66 3983 0.643 1620 9.586 5487 0.879 1620 9.690 7655 1.239 16207.448 365.0 1859 0.149 710 4.830 362.3 3009 0.243 1620 4.830 362.3 3983 0.321 1620 4.793 365.1 5487 0.439 1620 4.845 361.2 7655 0.619 16203.178 1859 0.099 710 3.202 3009 0.161 1620 3.202 3983 0.213 1620 3.177 5487 0.291 1620 3.211 7655 0.411 16202.397 1859 0.074 710 2.415 3009 0.121 1620 2.415 3983 0.161 1620 2.397 5487 0.220 1620 2.422 7655 0.310 16208.71 1859 0.270 710 8.40 3009 0.422 1620 8.40 3983 0.559 1620 8.818 5487 0.808 1620 8.424 7655 1.077 16207.448 401.7 1859 0.135 710 4.199 416.8 3009 0.211 1620 4.199 416.8 3983 0.279 1620 4.409 396.9 5487 0.404 1620 4.212 415.5 7655 0.539 16202.888 1859 0.090 710 2.783 3009 0.140 1620 2.783 3983 0.185 1620 2.922 5487 0.268 1620 2.792 7655 0.357 16202.178 1859 0.068 710 2.100 3009 0.106 1620 2.100 3983 0.140 1620 2.204 5487 0.202 1620 2.106 7655 0.269 16208.01 1859 0.249 710 7.87 3009 0.395 1620 7.87 3983 0.523 1620 7.881 5531 0.728 1620 7.451 7655 0.953 16207.448 436.7 1859 0.124 710 3.933 445.0 3009 0.198 1620 3.933 445.0 3983 0.262 1620 3.941 444.1 5531 0.364 1620 3.725 469.8 7655 0.476 16202.656 1859 0.082 710 2.607 3009 0.131 1620 2.607 3983 0.173 1620 2.612 5531 0.241 1620 2.469 7655 0.316 16202.004 1859 0.062 710 1.966 3009 0.099 1620 1.966 3983 0.131 1620 1.970 5531 0.182 1620 1.863 7655 0.238 16206.84 1859 0.212 710 7.24 3009 0.364 1620 7.24 3983 0.481 1620 6.565 5531 0.606 1620 6.853 7655 0.876 16207.448 511.7 1859 0.106 710 3.618 483.8 3009 0.182 1620 3.618 483.8 3983 0.241 1620 3.282 533.1 5531 0.303 1620 3.427 510.7 7655 0.438 16202.267 1859 0.070 710 2.398 3009 0.121 1620 2.398 3983 0.159 1620 2.176 5531 0.201 1620 2.271 7655 0.290 16201.710 1859 0.053 710 1.809 3009 0.091 1620 1.809 3983 0.120 1620 1.641 5531 0.152 1620 1.713 7655 0.219 16205.70 1859 0.177 710 5.83 3009 0.293 1620 5.83 3983 0.388 1620 6.159 5531 0.569 1620 5.911 7655 0.756 16207.448 614.2 1859 0.088 710 2.915 600.3 3009 0.147 1620 2.915 600.3 3983 0.194 1620 3.080 568.2 5531 0.285 1620 2.955 592.1 7655 0.378 16201.888 1859 0.059 710 1.932 3009 0.097 1620 1.932 3983 0.129 1620 2.041 5531 0.189 1620 1.959 7655 0.250 16201.425 1859 0.044 710 1.458 3009 0.073 1620 1.458 3983 0.097 1620 1.540 5531 0.142 1620 1.478 7655 0.189 16204.75 1859 0.147 710 4.86 3009 0.244 1620 4.86 3983 0.323 1620 5.133 5531 0.474 1620 4.924 7655 0.630 16207.448 736.9 1859 0.074 710 2.428 720.7 3009 0.122 1620 2.428 720.7 3983 0.162 1620 2.566 681.9 5531 0.237 1620 2.462 710.8 7655 0.315 16201.574 1859 0.049 710 1.610 3009 0.081 1620 1.610 3983 0.107 1620 1.701 5531 0.157 1620 1.632 7655 0.209 16201.187 1859 0.037 710 1.214 3009 0.061 1620 1.214 3983 0.081 1620 1.283 5531 0.119 1620 1.231 7655 0.157 16203.96 1859 0.123 710 4.12 3009 0.207 1620 4.12 3983 0.274 1620 4.331 5531 0.400 1620 4.128 7655 0.528 16207.448 884.3 1859 0.061 710 2.059 849.8 3009 0.103 1620 2.059 849.8 3983 0.137 1620 2.166 808.1 5531 0.200 1620 2.064 847.8 7655 0.264 16201.312 1859 0.041 710 1.365 3009 0.069 1620 1.365 3983 0.091 1620 1.435 5531 0.133 1620 1.368 7655 0.175 16200.989 1859 0.031 710 1.030 3009 0.052 1620 1.030 3983 0.068 1620 1.083 5531 0.100 1620 1.032 7655 0.132 16203.40 1859 0.105 710 3.43 3009 0.172 1620 3.43 3983 0.228 1620 3.600 5531 0.333 1620 3.440 7655 0.440 16207.448 1031 1859 0.053 710 1.716 1020 3009 0.086 1620 1.716 1020 3983 0.114 1620 1.800 972.2 5531 0.166 1620 1.720 1017 7655 0.220 16201.125 1859 0.035 710 1.138 3009 0.057 1620 1.138 3983 0.076 1620 1.193 5531 0.110 1620 1.140 7655 0.146 16200.849 1859 0.026 710 0.858 3009 0.043 1620 0.858 3983 0.057 1620 0.900 5531 0.083 1620 0.860 7655 0.110 16203.01 1859 0.094 710 3.13 3009 0.158 1620 3.13 3983 0.208 1620 3.097 5531 0.286 1620 3.141 7655 0.402 16207.448 1161 1859 0.047 710 1.567 1117 3009 0.079 1620 1.567 1117 3983 0.104 1620 1.548 1130 5531 0.143 1620 1.571 1114 7655 0.201 16200.999 1859 0.031 710 1.039 3009 0.052 1620 1.039 3983 0.069 1620 1.026 5531 0.095 1620 1.041 7655 0.133 16200.753 1859 0.023 710 0.784 3009 0.039 1620 0.784 3983 0.052 1620 0.774 5531 0.072 1620 0.785 7655 0.100 16202.71 1859 0.084 710 2.78 3009 0.140 1620 2.78 3983 0.185 1620 2.496 5531 0.231 1620 2.788 7655 0.356 16207.448 1291 1859 0.042 710 1.391 1258 3009 0.070 1620 1.391 1258 3983 0.093 1620 1.248 1402 5531 0.115 1620 1.394 1255 7655 0.178 16200.899 1859 0.028 710 0.922 3009 0.046 1620 0.922 3983 0.061 1620 0.827 5531 0.076 1620 0.924 7655 0.118 16200.678 1859 0.021 710 0.695 3009 0.035 1620 0.695 3983 0.046 1620 0.624 5531 0.058 1620 0.697 7655 0.089 16202.33 1797 0.070 710 2.27 3009 0.114 1620 2.27 3983 0.151 1620 2.199 5531 0.203 1620 2.323 7655 0.297 16207.448 1500 1797 0.035 710 1.135 1542 3009 0.057 1620 1.135 1542 3983 0.075 1620 1.099 1592 5531 0.102 1620 1.162 1506 7655 0.149 16200.773 1797 0.023 710 0.752 3009 0.038 1620 0.752 3983 0.050 1620 0.729 5531 0.067 1620 0.770 7655 0.098 16200.583 1797 0.018 710 0.567 3009 0.029 1620 0.567 3983 0.038 1620 0.550 5531 0.051 1620 0.581 7655 0.074 16201.94 1797 0.058 710 1.95 3009 0.098 1620 1.95 3983 0.130 1620 1.865 5531 0.172 1620 1.999 7655 0.256 16207.448 1807 1797 0.029 710 0.976 1792 3009 0.049 1620 0.976 1792 3983 0.065 1620 0.932 1877 5531 0.086 1620 0.999 1751 7655 0.128 16200.642 1797 0.019 710 0.647 3009 0.033 1620 0.647 3983 0.043 1620 0.618 5531 0.057 1620 0.662 7655 0.085 16200.484 1797 0.015 710 0.488 3009 0.025 1620 0.488 3983 0.032 1620 0.466 5531 0.043 1620 0.500 7655 0.064 16201.71 1797 0.051 710 1.75 3009 0.088 1620 1.75 3363 0.098 1620 1.703 5531 0.157 1620 1.737 6416 0.186 16207.448 2051 1797 0.026 710 0.876 1998 3009 0.044 1620 0.876 1998 3363 0.049 1620 0.851 2055 5531 0.079 1620 0.869 2015 6416 0.093 16200.566 1797 0.017 710 0.581 3009 0.029 1620 0.581 3363 0.033 1620 0.564 5531 0.052 1620 0.576 6416 0.062 16200.427 1797 0.013 710 0.438 3009 0.022 1620 0.438 3363 0.025 1620 0.426 5531 0.039 1620 0.434 6416 0.047 16201.49 1797 0.045 710 1.54 3009 0.078 1620 1.54 3363 0.087 1620 1.498 5531 0.138 1620 1.530 6416 0.164 16207.448 2350 1797 0.022 710 0.772 2268 3009 0.039 1620 0.772 2268 3363 0.043 1620 0.749 2337 5531 0.069 1620 0.765 2287 6416 0.082 16200.494 1797 0.015 710 0.512 3009 0.026 1620 0.512 3363 0.029 1620 0.496 5531 0.046 1620 0.507 6416 0.054 16200.372 1797 0.011 710 0.386 3009 0.019 1620 0.386 3363 0.022 1620 0.374 5531 0.035 1620 0.383 6416 0.041 16201.31 1797 0.039 710 1.36 3009 0.068 1620 1.36 3363 0.076 1620 1.390 5487 0.127 1620 1.346 6416 0.144 16207.448 2671 1797 0.020 710 0.679 2578 3009 0.034 1620 0.679 2578 3363 0.038 1620 0.695 2519 5487 0.064 1620 0.673 2600 6416 0.072 16200.434 1797 0.013 710 0.450 3009 0.023 1620 0.450 3363 0.025 1620 0.461 5487 0.042 1620 0.446 6416 0.048 16200.328 1797 0.010 710 0.339 3009 0.017 1620 0.339 3363 0.019 1620 0.347 5487 0.032 1620 0.337 6416 0.036 1620

103

QUADRUPLE REDUCTION RATINGSSIZES M08 - M14

QUADRUPLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0842


6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)


0206

M0941

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1041

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1341

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1441

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875350017501160875

2 2 5

2 5 0

2 8 0

3 0 0

3 6 0

4 0 0

4 5 0

5 0 0

6 5 0

7 3 0

8 6 0

1 0 C

1 1 C

1 3 C

1 5 C

1 8 C

2 0 C

2 4 C

2 7 C

15.290 12390 3.164 3645 15.144 23364 5.910 6300 15.887 39029 10.356 9000 15.419 56198 14.472 14400 14.178 93810 22.214 177757.645 228.9 12390 1.582 3645 7.572 231.1 23364 2.955 6300 7.944 220.3 39029 5.178 9000 7.709 227.0 56198 7.236 14400 7.089 246.9 93810 11.107 177755.067 12390 1.049 3645 5.019 23364 1.959 6300 5.265 39029 3.432 9000 5.110 56198 4.796 14400 4.699 93810 7.362 17775

3.822 12390 0.791 3645 3.786 23364 1.477 6300 3.972 39029 2.589 9000 3.855 56198 3.618 14400 3.544 93810 5.553 1777513.515 13275 2.996 3645 13.555 25311 5.730 6300 14.449 39029 9.418 9000 14.022 56198 13.161 14400 12.894 93810 20.202 177756.757 259.0 13275 1.498 3645 6.778 258.2 25311 2.865 6300 7.224 242.2 39029 4.709 9000 7.011 249.6 56198 6.581 14400 6.447 271.4 93810 10.101 177754.479 13275 0.993 3645 4.493 25311 1.899 6300 4.789 39029 3.121 9000 4.647 56198 4.362 14400 4.274 93810 6.696 177753.379 13275 0.749 3645 3.389 25311 1.433 6300 3.612 39029 2.355 9000 3.506 56198 3.290 14400 3.224 93810 5.051 1777511.620 13275 2.576 3645 11.659 25311 4.929 6300 12.575 39029 8.197 9000 12.204 56198 11.454 14400 11.222 93810 17.582 17775

5.810 301.2 13275 1.288 3645 5.829 300.2 25311 2.464 6300 6.287 278.3 39029 4.098 9000 6.102 286.8 56198 5.727 14400 5.611 311.9 93810 8.791 177753.851 13275 0.854 3645 3.864 25311 1.633 6300 4.168 39029 2.717 9000 4.045 56198 3.796 14400 3.719 93810 5.827 177752.905 13275 0.644 3645 2.915 25311 1.232 6300 3.144 39029 2.049 9000 3.051 56198 2.864 14400 2.805 93810 4.395 17775

10.386 13275 2.303 3645 10.422 25311 4.406 6300 11.090 39029 7.229 9000 10.763 56198 10.102 14400 9.897 93810 15.506 177755.193 337.0 13275 1.151 3645 5.211 335.8 25311 2.203 6300 5.545 315.6 39029 3.614 9000 5.381 325.2 56198 5.051 14400 4.948 353.7 93810 7.753 177753.442 13275 0.763 3645 3.454 25311 1.460 6300 3.675 39029 2.396 9000 3.567 56198 3.348 14400 3.280 93810 5.139 17775

2.596 13275 0.576 3645 2.606 25311 1.101 6300 2.772 39029 1.807 9000 2.691 56198 2.525 14400 2.474 93810 3.876 177759.744 13275 2.160 3645 9.775 25311 4.132 6300 10.051 39029 6.552 9000 9.755 56198 9.156 14400 8.970 93810 14.054 177754.872 359.2 13275 1.080 3645 4.887 358.1 25311 2.066 6300 5.026 348.2 39029 3.276 9000 4.877 358.8 56198 4.578 14400 4.485 390.2 93810 7.027 177753.229 13275 0.716 3645 3.240 25311 1.370 6300 3.331 39029 2.171 9000 3.233 56198 3.034 14400 2.973 93810 4.658 177752.436 13275 0.540 3645 2.444 25311 1.033 6300 2.513 39029 1.638 9000 2.439 56198 2.289 14400 2.242 93810 3.513 177758.222 13275 1.823 3645 8.248 25311 3.487 6300 8.779 39029 5.722 9000 8.520 56198 7.997 14400 7.834 93810 12.275 17775

4.111 425.7 13275 0.911 3645 4.124 424.4 25311 1.743 6300 4.389 398.7 39029 2.861 9000 4.260 410.8 56198 3.998 14400 3.917 446.7 93810 6.137 177752.725 13275 0.604 3645 2.734 25311 1.156 6300 2.910 39029 1.897 9000 2.824 56198 2.650 14400 2.597 93810 4.068 177752.055 13275 0.456 3645 2.062 25311 0.872 6300 2.195 39029 1.431 9000 2.130 56198 1.999 14400 1.959 93810 3.069 177757.284 13629 1.658 3645 7.425 25311 3.139 6300 7.900 39029 5.149 9000 7.557 56198 7.092 14400 7.109 95580 11.348 177753.642 480.5 13629 0.829 3645 3.713 471.4 25311 1.570 6300 3.950 443.0 39029 2.575 9000 3.778 463.2 56198 3.546 14400 3.554 492.3 95580 5.674 177752.414 13629 0.550 3645 2.461 25311 1.040 6300 2.618 39029 1.707 9000 2.504 56198 2.351 14400 2.356 95580 3.761 17775

1.821 13629 0.415 3645 1.856 25311 0.785 6300 1.975 39029 1.287 9000 1.889 56198 1.773 14400 1.777 95580 2.837 177756.822 13629 1.553 3645 6.956 25311 2.941 6300 6.985 39029 4.553 9000 6.681 56198 6.271 14400 6.286 95580 10.034 177753.411 513.0 13629 0.776 3645 3.478 503.1 25311 1.470 6300 3.493 501.1 39029 2.277 9000 3.341 523.8 56198 3.136 14400 3.143 556.8 95580 5.017 177752.261 13629 0.515 3645 2.306 25311 0.975 6300 2.315 39029 1.509 9000 2.214 56198 2.078 14400 2.083 95580 3.326 177751.706 13629 0.388 3645 1.739 25311 0.735 6300 1.746 39029 1.138 9000 1.670 56198 1.568 14400 1.571 95580 2.509 177755.628 15045 1.414 3645 5.606 25311 2.370 6300 6.025 39029 3.928 9000 5.763 56198 5.410 14400 5.422 95580 8.655 177752.814 621.9 15045 0.707 3645 2.803 624.4 25311 1.185 6300 3.013 580.9 39029 1.964 9000 2.882 607.3 56198 2.705 14400 2.711 645.5 95580 4.328 17775

1.865 15045 0.469 3645 1.858 25311 0.785 6300 1.997 39029 1.302 9000 1.910 56198 1.793 14400 1.797 95580 2.869 177751.407 15045 0.354 3645 1.401 25311 0.592 6300 1.506 39029 0.982 9000 1.441 56198 1.352 14400 1.356 95580 2.164 177754.535 15045 1.140 3645 4.754 25311 2.010 6300 5.052 39029 3.293 9000 4.832 56198 4.535 14400 4.546 95580 7.257 177752.268 771.8 15045 0.570 3645 2.377 736.2 25311 1.005 6300 2.526 692.8 39029 1.646 9000 2.416 724.3 56198 2.268 14400 2.273 769.9 95580 3.628 177751.503 15045 0.378 3645 1.576 25311 0.666 6300 1.674 39029 1.091 9000 1.602 56198 1.503 14400 1.507 95580 2.405 177751.134 15045 0.285 3645 1.189 25311 0.502 6300 1.263 39029 0.823 9000 1.208 56198 1.134 14400 1.136 95580 1.814 17775

3.889 15045 0.977 3645 3.968 25311 1.677 6300 4.225 39029 2.754 9000 4.075 56198 3.825 14400 4.366 94695 6.905 177751.944 900.0 15045 0.489 3645 1.984 882.1 25311 0.839 6300 2.113 828.4 39029 1.377 9000 2.038 858.8 56198 1.913 14400 2.183 801.7 94695 3.452 177751.289 15045 0.324 3645 1.315 25311 0.556 6300 1.400 39029 0.913 9000 1.351 56198 1.268 14400 1.447 94695 2.288 177750.972 15045 0.244 3645 0.992 25311 0.419 6300 1.056 39029 0.689 9000 1.019 56198 0.956 14400 1.091 94695 1.726 177753.298 15045 0.829 3645 3.365 25311 1.423 6300 3.542 39029 2.309 9000 3.417 56198 3.207 14400 3.766 94695 5.956 177751.649 1061 15045 0.414 3645 1.683 1040 25311 0.711 6300 1.771 988.0 39029 1.155 9000 1.708 1024 56198 1.604 14400 1.883 929.4 94695 2.978 17775

1.093 15045 0.275 3645 1.115 25311 0.471 6300 1.174 39029 0.765 9000 1.132 56198 1.063 14400 1.248 94695 1.974 177750.824 15045 0.207 3645 0.841 25311 0.356 6300 0.886 39029 0.577 9000 0.854 56198 0.802 14400 0.942 94695 1.489 177753.002 15045 0.754 3645 3.048 25311 1.289 6300 3.075 39029 2.004 9000 3.068 56198 2.879 14400 3.158 94695 4.994 177751.501 1166 15045 0.377 3645 1.524 1148 25311 0.644 6300 1.537 1138 39029 1.002 9000 1.534 1141 56198 1.440 14400 1.579 1108 94695 2.497 177750.995 15045 0.250 3645 1.010 25311 0.427 6300 1.019 39029 0.664 9000 1.017 56198 0.954 14400 1.046 94695 1.655 177750.751 15045 0.189 3645 0.762 25311 0.322 6300 0.769 39029 0.501 9000 0.767 56198 0.720 14400 0.789 94695 1.248 17775

2.742 15045 0.689 3645 2.613 25311 1.104 6300 2.808 39029 1.830 9000 2.802 56198 2.630 14400 2.884 94695 4.561 177751.371 1277 15045 0.344 3645 1.306 1340 25311 0.552 6300 1.404 1246 39029 0.915 9000 1.401 1249 56198 1.315 14400 1.442 1214 94695 2.280 177750.909 15045 0.228 3645 0.866 25311 0.366 6300 0.931 39029 0.607 9000 0.929 56198 0.872 14400 0.956 94695 1.512 177750.685 15045 0.172 3645 0.653 25311 0.276 6300 0.702 39029 0.458 9000 0.700 56198 0.657 14400 0.721 94695 1.140 177752.237 15045 0.562 3645 2.216 25311 0.937 6300 2.273 37701 1.432 9000 2.290 56198 2.150 14400 2.330 89385 3.478 177751.119 1564 15045 0.281 3645 1.108 1580 25311 0.468 6300 1.137 1540 37701 0.716 9000 1.145 1528 56198 1.075 14400 1.165 1502 89385 1.739 17775

0.742 15045 0.186 3645 0.734 25311 0.310 6300 0.753 37701 0.474 9000 0.759 56198 0.712 14400 0.772 89385 1.153 177750.559 15045 0.141 3645 0.554 25311 0.234 6300 0.568 37701 0.358 9000 0.573 56198 0.537 14400 0.583 89385 0.870 177751.826 15045 0.459 3645 2.023 25311 0.855 6300 2.076 37701 1.307 9000 1.908 56198 1.791 14400 1.941 89385 2.898 177750.913 1917 15045 0.229 3645 1.012 1730 25311 0.428 6300 1.038 1686 37701 0.654 9000 0.954 1834 56198 0.896 14400 0.971 1803 89385 1.449 177750.605 15045 0.152 3645 0.671 25311 0.283 6300 0.688 37701 0.433 9000 0.632 56198 0.594 14400 0.643 89385 0.961 177750.456 15045 0.115 3645 0.506 25311 0.214 6300 0.519 37701 0.327 9000 0.477 56198 0.448 14400 0.485 89385 0.725 17775

1.672 15045 0.420 3645 1.651 25311 0.698 6300 1.730 37701 1.089 9000 1.659 56198 1.557 14400 1.688 89385 2.519 177750.836 2094 15045 0.210 3645 0.826 2120 25311 0.349 6300 0.865 2023 37701 0.545 9000 0.829 2110 56198 0.778 14400 0.844 2074 89385 1.260 177750.554 15045 0.139 3645 0.547 25311 0.231 6300 0.573 37701 0.361 9000 0.550 56198 0.516 14400 0.559 89385 0.835 177750.418 15045 0.105 3645 0.413 25311 0.174 6300 0.432 37701 0.272 9000 0.415 56198 0.389 14400 0.422 89385 0.630 177751.500 15045 0.377 3645 1.481 25311 0.626 6300 1.504 37701 0.947 9000 1.493 56198 1.401 14400 1.519 89385 2.267 177750.750 2333 15045 0.188 3645 0.741 2363 25311 0.313 6300 0.752 2327 37701 0.473 9000 0.746 2345 56198 0.701 14400 0.759 2305 89385 1.134 17775

0.497 15045 0.125 3645 0.491 25311 0.208 6300 0.498 37701 0.314 9000 0.495 56198 0.464 14400 0.503 89385 0.751 177750.375 15045 0.094 3645 0.370 25311 0.157 6300 0.376 37701 0.237 9000 0.373 56198 0.350 14400 0.380 89385 0.567 177751.337 15045 0.336 3645 1.321 25311 0.558 6300 1.353 37701 0.852 9000 1.212 56198 1.137 14400 1.231 82128 1.688 177750.669 2617 15045 0.168 3645 0.660 2650 25311 0.279 6300 0.677 2586 37701 0.426 9000 0.606 2889 56198 0.569 14400 0.615 2844 82128 0.844 177750.443 15045 0.111 3645 0.438 25311 0.185 6300 0.449 37701 0.282 9000 0.402 56198 0.377 14400 0.408 82128 0.559 177750.334 15045 0.084 3645 0.330 25311 0.140 6300 0.338 37701 0.213 9000 0.303 56198 0.284 14400 0.308 82128 0.422 17775

104

QUINTUPLE REDUCTION RATINGSSIZES M03 - M07

QUINTUPLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0352


6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)


0107

M0452

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0552

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0652

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M0752

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

1.33 1859 0.041 710 1.32 3009 0.066 1620 1.32 3983 0.088 1620 1.321 5531 0.122 1620 1.336 7655 0.171 1620

0.665 2632 1859 0.021 710 0.659 2655 3009 0.033 1620 0.659 2655 3983 0.044 1620 0.661 2649 5531 0.062 1620 0.668 2619 7655 0.086 1620

0.441 1859 0.014 710 0.437 3009 0.022 1620 0.437 3983 0.029 1620 0.438 5531 0.041 1620 0.443 7655 0.057 1620

0.332 1859 0.010 710 0.330 3009 0.017 1620 0.330 3983 0.022 1620 0.330 5531 0.031 1620 0.334 7655 0.043 1620

1.14 1859 0.035 710 1.13 3009 0.066 1620 1.13 3983 0.088 1620 1.133 5531 0.122 1620 1.146 7655 0.147 1620

0.665 3068 1859 0.018 710 0.565 3095 3009 0.033 1620 0.565 3095 3983 0.044 1620 0.567 3088 5531 0.062 1620 0.573 3053 7655 0.074 1620

0.378 1859 0.012 710 0.375 3009 0.022 1620 0.375 3983 0.029 1620 0.376 5531 0.041 1620 0.380 7655 0.049 1620

0.285 1859 0.009 710 0.283 3009 0.017 1620 0.283 3983 0.022 1620 0.283 5531 0.031 1620 0.287 7655 0.037 1620

0.95 1859 0.030 710 0.96 3009 0.066 1620 0.96 3983 0.088 1620 0.913 5531 0.122 1620 0.961 7655 0.123 1620

0.665 3681 1859 0.015 710 0.479 3650 3009 0.033 1620 0.479 3650 3983 0.044 1620 0.457 3832 5531 0.062 1620 0.481 3641 7655 0.062 1620

0.315 1859 0.010 710 0.318 3009 0.022 1620 0.318 3983 0.029 1620 0.303 5531 0.041 1620 0.319 7655 0.041 1620

0.238 1859 0.007 710 0.240 3009 0.017 1620 0.240 3983 0.022 1620 0.228 5531 0.031 1620 0.240 7655 0.031 1620

0.86 1859 0.027 710 0.86 3009 0.066 1620 0.86 3983 0.088 1620 0.822 5531 0.122 1620 0.865 7655 0.111 1620

0.665 4091 1859 0.013 710 0.432 4055 3009 0.033 1620 0.432 4055 3983 0.044 1620 0.411 4258 5531 0.062 1620 0.433 4046 7655 0.056 1620

0.284 1859 0.009 710 0.286 3009 0.022 1620 0.286 3983 0.029 1620 0.272 5531 0.041 1620 0.287 7655 0.037 1620

0.214 1859 0.007 710 0.216 3009 0.017 1620 0.216 3983 0.022 1620 0.206 5531 0.031 1620 0.216 7655 0.028 1620

0.76 1859 0.024 710 0.79 3009 0.066 1620 0.79 3983 0.088 1620 0.697 5531 0.122 1620 0.790 7655 0.101 1620

0.665 4609 1859 0.012 710 0.394 4440 3009 0.033 1620 0.394 4440 3983 0.044 1620 0.349 5021 5531 0.062 1620 0.395 4431 7655 0.051 1620

0.252 1859 0.008 710 0.261 3009 0.022 1620 0.261 3983 0.029 1620 0.231 5531 0.041 1620 0.262 7655 0.034 1620

0.190 1859 0.006 710 0.197 3009 0.017 1620 0.197 3983 0.022 1620 0.174 5531 0.031 1620 0.197 7655 0.026 1620

0.63 1859 0.020 710 0.65 3009 0.066 1620 0.65 3983 0.088 1620 0.579 5531 0.122 1620 0.656 7655 0.084 1620

0.665 5550 1859 0.010 710 0.327 5347 3009 0.033 1620 0.327 5347 3983 0.044 1620 0.289 6046 5531 0.062 1620 0.328 5335 7655 0.042 1620

0.209 1859 0.007 710 0.217 3009 0.022 1620 0.217 3983 0.029 1620 0.192 5531 0.041 1620 0.217 7655 0.028 1620

0.158 1859 0.005 710 0.164 3009 0.017 1620 0.164 3983 0.022 1620 0.145 5531 0.031 1620 0.164 7655 0.021 1620

0.54 1797 0.016 710 0.53 3009 0.066 1620 0.53 3983 0.088 1620 0.529 5531 0.122 1620 0.547 7655 0.070 1620

0.665 6452 1797 0.008 710 0.267 6553 3009 0.033 1620 0.267 6553 3983 0.044 1620 0.264 6620 5531 0.062 1620 0.273 6403 7655 0.035 1620

0.180 1797 0.005 710 0.177 3009 0.022 1620 0.177 3983 0.029 1620 0.175 5531 0.041 1620 0.181 7655 0.023 1620

0.136 1797 0.004 710 0.134 3009 0.017 1620 0.134 3983 0.022 1620 0.132 5531 0.031 1620 0.137 7655 0.018 1620

0.47 1797 0.014 710 0.47 3009 0.066 1620 0.47 3983 0.088 1620 0.461 5531 0.122 1620 0.477 7655 0.061 1620

0.665 7396 1797 0.007 710 0.233 7511 3009 0.033 1620 0.233 7511 3983 0.044 1620 0.231 7588 5531 0.062 1620 0.238 7339 7655 0.031 1620

0.157 1797 0.005 710 0.154 3009 0.022 1620 0.154 3983 0.029 1620 0.153 5531 0.041 1620 0.158 7655 0.020 1620

0.118 1797 0.004 710 0.116 3009 0.017 1620 0.116 3983 0.022 1620 0.115 5531 0.031 1620 0.119 7655 0.015 1620

0.42 1797 0.013 710 0.42 3009 0.066 1620 0.42 3363 0.088 1620 0.406 5531 0.122 1620 0.415 6416 0.044 1620

0.665 8394 1797 0.006 710 0.209 8372 3009 0.033 1620 0.209 8372 3363 0.044 1620 0.203 8624 5531 0.062 1620 0.207 8443 6416 0.022 1620

0.138 1797 0.004 710 0.139 3009 0.022 1620 0.139 3363 0.029 1620 0.135 5531 0.041 1620 0.137 6416 0.015 1620

0.104 1797 0.003 710 0.105 3009 0.017 1620 0.105 3363 0.022 1620 0.101 5531 0.031 1620 0.104 6416 0.011 1620

0.37 1797 0.011 710 0.37 3009 0.066 1620 0.37 3363 0.088 1620 0.000 5487 0.122 1620 0.365 6416 0.039 1620

0.665 9540 1797 0.006 710 0.184 9514 3009 0.033 1620 0.184 9514 3363 0.044 1620 0.000 9300 5487 0.062 1620 0.182 9596 6416 0.020 1620

0.122 1797 0.004 710 0.122 3009 0.022 1620 0.122 3363 0.029 1620 0.000 5487 0.041 1620 0.121 6416 0.013 1620

0.092 1797 0.003 710 0.092 3009 0.017 1620 0.092 3363 0.022 1620 0.000 5487 0.031 1620 0.091 6416 0.010 1620

0.32 1797 0.010 710 0.33 2390 0.066 1620 0.33 2390 0.088 1620 0.000 5487 0.122 1620 0.328 6416 0.035 1620

0.665 10845 1797 0.005 710 0.164 10670 2390 0.033 1620 0.164 10670 2390 0.044 1620 0.000 10569 5487 0.062 1620 0.164 10662 6416 0.018 1620

0.107 1797 0.003 710 0.109 2390 0.022 1620 0.109 2390 0.029 1620 0.000 5487 0.041 1620 0.109 6416 0.012 1620

0.081 1797 0.002 710 0.082 2390 0.017 1620 0.082 2390 0.022 1620 0.000 5487 0.031 1620 0.082 6416 0.009 1620

2 7 C

3 2 C

3 6 C

4 0 C

4 6 C

5 5 C

6 5 C

7 4 C

8 4 C

9 5 C

1 0 K

105

106

QUINTUPLE REDUCTION RATINGSSIZES M08 - M14

QUINTUPLE REDUCTION

ColumnEntry

InputSpeed

N1(rpm)

M0852


6 7 8N2

(rpm)i

(:1)M2

(lb.in)Pm

(HP)fra

(lbf)


0107

M0951

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1051

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1351

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

M1451

N2(rpm)

i(:1)

M2(lb.in)

Pm(HP)

fra(lbf)

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

3500

1750

1160

875

1.283 15045 0.322 3645 1.347 25311 0.570 6300 1.431 39029 0.933 9000 1.380 56198 1.296 14400 1.276 94695 2.017 17775

0.641 2728 15045 0.163 3645 0.674 2598 25311 0.288 6300 0.716 2446 39029 0.503 9000 0.690 2536 56198 0.655 14400 0.638 2744 94695 1.019 17775

0.425 15071 0.108 3645 0.447 25311 0.191 6300 0.474 39029 0.312 9000 0.457 56198 0.434 14400 0.423 94695 0.676 17775

0.321 15045 0.081 3645 0.337 25311 0.144 6300 0.358 39029 0.236 9000 0.345 56198 0.327 14400 0.319 94695 0.510 17775

1.069 15045 0.269 3645 1.122 25311 0.474 6300 1.153 39029 0.752 9000 1.112 56198 1.044 14400 1.028 94695 1.626 17775

0.534 3274 15045 0.136 3645 0.561 3119 25311 0.240 6300 0.577 3035 39029 0.405 9000 0.556 3146 56198 0.528 14400 0.514 3405 94695 0.822 17775

0.354 15071 0.090 3645 0.372 25311 0.159 6300 0.382 39029 0.252 9000 0.369 56198 0.350 14400 0.341 94695 0.545 17775

0.267 15045 0.068 3645 0.281 25311 0.120 6300 0.288 39029 0.190 9000 0.278 56198 0.264 14400 0.257 94695 0.411 17775

0.917 15045 0.230 3645 0.935 25311 0.395 6300 0.978 39029 0.638 9000 0.943 56198 0.885 14400 0.872 94695 1.379 17775

0.458 3818 15045 0.116 3645 0.468 3742 25311 0.200 6300 0.489 3579 39029 0.344 9000 0.472 3710 56198 0.447 14400 0.436 4015 94695 0.697 17775

0.304 15071 0.077 3645 0.310 25311 0.132 6300 0.324 39029 0.214 9000 0.313 56198 0.297 14400 0.289 94695 0.462 17775

0.229 15045 0.058 3645 0.234 25311 0.100 6300 0.245 39029 0.161 9000 0.236 56198 0.224 14400 0.218 94695 0.348 17775

0.814 15045 0.204 3645 0.830 25311 0.351 6300 0.893 39029 0.582 9000 0.862 56198 0.809 14400 0.796 94695 1.259 17775

0.407 4302 15045 0.103 3645 0.415 4216 25311 0.177 6300 0.447 3919 39029 0.314 9000 0.431 4062 56198 0.409 14400 0.398 4396 94695 0.636 17775

0.270 15071 0.068 3645 0.275 25311 0.118 6300 0.296 39029 0.195 9000 0.286 56198 0.271 14400 0.264 94695 0.422 17775

0.203 15045 0.052 3645 0.208 25311 0.089 6300 0.223 39029 0.147 9000 0.215 56198 0.204 14400 0.199 94695 0.318 17775

0.741 15045 0.186 3645 0.752 25311 0.318 6300 0.775 39029 0.505 9000 0.773 56198 0.726 14400 0.704 89385 1.052 17775

0.370 4726 15045 0.094 3645 0.376 4655 25311 0.161 6300 0.388 4515 39029 0.272 9000 0.387 4525 56198 0.367 14400 0.352 4969 89385 0.531 17775

0.245 15071 0.062 3645 0.249 25311 0.106 6300 0.257 39029 0.169 9000 0.256 56198 0.243 14400 0.233 89385 0.352 17775

0.185 15045 0.047 3645 0.188 25311 0.080 6300 0.194 39029 0.128 9000 0.193 56198 0.183 14400 0.176 89385 0.266 17775

0.637 15045 0.160 3645 0.647 25311 0.273 6300 0.633 39029 0.412 9000 0.631 56198 0.592 14400 0.643 89385 0.960 17775

0.319 5494 15045 0.081 3645 0.323 5411 25311 0.138 6300 0.316 5533 39029 0.222 9000 0.316 5545 56198 0.299 14400 0.322 5441 89385 0.485 17775

0.211 15071 0.054 3645 0.214 25311 0.092 6300 0.210 39029 0.138 9000 0.209 56198 0.198 14400 0.213 89385 0.322 17775

0.159 15045 0.040 3645 0.162 25311 0.069 6300 0.158 39029 0.104 9000 0.158 56198 0.150 14400 0.161 89385 0.243 17775

0.520 15045 0.131 3645 0.519 21948 0.190 6300 0.573 37701 0.361 9000 0.516 56198 0.484 14400 0.525 89385 0.784 17775

0.260 6733 15045 0.066 3645 0.260 6742 21948 0.096 6300 0.287 6106 37701 0.195 9000 0.258 6783 56198 0.245 14400 0.262 6668 89385 0.396 17775

0.172 15071 0.044 3645 0.172 21948 0.064 6300 0.190 37701 0.121 9000 0.171 56198 0.162 14400 0.174 89385 0.262 17775

0.130 15045 0.033 3645 0.130 21948 0.048 6300 0.143 37701 0.091 9000 0.129 56198 0.122 14400 0.131 89385 0.198 17775

0.458 15045 0.115 3645 0.457 21948 0.168 6300 0.468 37701 0.295 9000 0.463 56198 0.434 14400 0.471 89385 0.703 17775

0.229 7641 15045 0.058 3645 0.229 7652 21948 0.085 6300 0.234 7483 37701 0.159 9000 0.231 7561 56198 0.220 14400 0.235 7432 89385 0.355 17775

0.152 15071 0.039 3645 0.152 21948 0.056 6300 0.155 37701 0.099 9000 0.153 56198 0.146 14400 0.156 89385 0.235 17775

0.115 15045 0.029 3645 0.114 21948 0.042 6300 0.117 37701 0.074 9000 0.116 56198 0.110 14400 0.118 89385 0.178 17775

0.419 15045 0.105 3645 0.414 25311 0.175 6300 0.420 37701 0.264 9000 0.413 56198 0.387 14400 0.420 89385 0.627 17775

0.210 8344 15045 0.053 3645 0.207 8449 25311 0.088 6300 0.210 8340 37701 0.142 9000 0.206 8479 56198 0.196 14400 0.210 8335 89385 0.317 17775

0.139 15071 0.035 3645 0.137 25311 0.059 6300 0.139 37701 0.089 9000 0.137 56198 0.130 14400 0.139 89385 0.210 17775

0.105 15045 0.027 3645 0.104 25311 0.044 6300 0.105 37701 0.067 9000 0.103 56198 0.098 14400 0.105 89385 0.158 17775

0.369 15045 0.093 3645 0.364 25311 0.154 6300 0.374 37701 0.236 9000 0.369 50445 0.311 14400 0.343 82128 0.471 17775

0.184 9486 15045 0.047 3645 0.182 9605 25311 0.078 6300 0.187 9354 37701 0.127 9000 0.184 9490 50445 0.157 14400 0.172 10192 82128 0.238 17775

0.122 15071 0.031 3645 0.121 25311 0.052 6300 0.124 37701 0.079 9000 0.122 50445 0.104 14400 0.114 82128 0.158 17775

0.092 15045 0.023 3645 0.091 25311 0.039 6300 0.094 37701 0.060 9000 0.092 50445 0.079 14400 0.086 82128 0.119 17775

0.320 13718 0.073 3645 0.292 21948 0.107 6300 0.348 37436 0.218 9000 0.347 53366 0.309 14400 0.306 82128 0.420 17775

0.160 10924 13718 0.037 3645 0.146 11966 21948 0.054 6300 0.174 10048 37436 0.117 9000 0.173 10097 53366 0.156 14400 0.153 11430 82128 0.212 17775

0.106 13741 0.025 3645 0.097 21948 0.036 6300 0.115 37436 0.073 9000 0.115 53366 0.103 14400 0.101 82128 0.141 17775

0.080 13718 0.019 3645 0.073 21948 0.027 6300 0.087 37436 0.055 9000 0.087 53366 0.078 14400 0.077 82128 0.106 17775

2 7 C

3 2 C

3 6 C

4 0 C

4 6 C

5 5 C

6 5 C

7 4 C

8 4 C

9 5 C

1 0 K

s

c

nb

f

h

p3 p

a

e

i

L

L1

L12

ød

h1

ød

1

øg

6TappedHole w

TappedHole w1

k

L14

t

t1

uu

1

Low Speed Shaft

High Speed Shaft

0112

107

aSIZE b ec f hg6 i k n p s


h1

M0512

M0612

M0712

M0812

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w

High Speed Shaft Low Speed Shaft

p3

M0512

M0612

M0712

M0812

4.33 4.92 0.67 5.39 5.98 5.51 2.48 1.85 2.20 10.67 1.06 8.58 7.09 0.43

4.72 5.31 0.79 5.91 6.69 7.09 3.15 2.36 2.95 12.44 1.38 10.16 9.06 0.55

5.91 6.69 0.98 7.48 8.35 8.35 3.54 2.91 3.35 14.25 1.65 12.05 10.63 0.69

6.30 8.46 1.18 8.11 10.43 9.84 3.94 3.82 4.33 17.68 2.36 13.86 12.68 0.69

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep1.1250 2.36 2 1.23 1/4

3/8 UNF1.1245 x .87 deep

0.7500 1.575 19/32 0.829 3/161/4 UNF x

0.7495 0.63 deep1.0000 1.969 19/16 1.106 1/4

1/4 UNF x0.9995 0.71 deep1.2500 2.362 2 1.359 1/4

1/4 UNF x1.2495 0.71 deep1.6250 3.15 23/8 1.784 3/8

5/8 UNF x1.6240 1.25 deep

s

c

nb

f

h

o1

o

h1

a

e

i

L L1L12

d

d1

g2

TappedHole w

TappedHole w1

p3p

k

L14

t

t1

uu

1

Low Speed Shaft

High Speed Shaft

0112

108

aSIZE b ec f hg2 i k n o o1 p p3 s


h1

M0122

M0222

M0322

M0422

M0522

M0622

M0722

M0822

M0921

M1021

M1321

M1421

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w

M0122

M0222

M0322

M0422

M0522

M0622

M0722

M0822

M0921

M1021

M1321

M1421


4.33 4.33 0.47 5.16 5.31 5.51 2.95 - 2.28 11.26 0.98 5.98 2.99 - 5.87 0.39

5.12 4.33 0.63 5.98 5.71 5.51 3.54 - 2.95 12.48 1.38 6.69 3.31 - 7.09 0.39

5.12 4.33 0.63 5.98 5.71 5.51 3.54 - 2.95 12.48 1.38 6.69 3.31 - 7.09 0.39

6.50 5.31 0.79 7.87 7.48 7.09 4.53 - 3.54 14.53 2.17 8.03 3.82 - 8.19 0.59

6.50 5.31 0.79 7.87 7.48 7.09 4.53 - 3.94 14.92 2.17 8.03 3.82 - 8.19 0.59

7.68 5.91 0.94 9.25 8.27 7.09 5.12 0.57 3.94 15.75 2.36 8.66 4.33 9.69 8.43 0.59

8.07 6.69 0.98 9.65 9.06 8.35 5.51 - 4.53 17.32 2.36 9.92 4.69 11.61 9.84 0.75

10.24 8.46 1.38 12.20 11.42 9.84 7.09 - 5.51 21.85 2.95 12.60 6.57 14.17 12.20 0.75

12.20 9.84 1.57 14.37 13.39 11.81 8.86 - 6.30 25.98 3.54 14.65 7.87 17.05 15.51 0.91

14.57 11.42 1.77 17.32 15.75 14.17 9.84 - 7.28 30.79 4.33 16.85 8.86 19.88 17.56 1.06

16.14 13.39 1.97 19.29 17.72 15.75 10.43 - 8.66 35.71 4.33 18.50 9.53 22.17 19.02 1.34

19.69 14.96 1.97 23.23 20.87 18.11 11.81 - 10.24 40.24 5.91 21.50 10.94 24.80 21.69 1.61


1.97 deep1 UNF x

1.97 deep

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep1.1250 2.36 2 1.23 1/4

3/8 UNF1.1245 x .87 deep1.3750 3.15 213/32 1.51 5/16

1/2 UNF1.3745 x 1.10 deep1.6250 4.33 311/16 1.79 3/8

5/8 UNF1.6240 x 1.42 deep2.1250 4.33 313/16 2.35 1/2

3/4 UNF2.1240 x 1.65 deep2.1250 4.33 313/16 2.35 1/2

3/4 UNF2.1240 x 1.65 deep

0.7500 1.575 19/32 0.829 3/160.74951.0000 1.969 19/16 1.106 1/40.99951.0000 1.969 19/16 1.106 1/40.99951.2500 2.362 2 1.359 1/41.24951.3750 2.756 23/8 1.507 5/161.37451.3750 2.756 23/8 1.507 5/161.37451.6250 3.15 23/8 1.784 3/81.62402.1250 3.937 23/4 2.338 1/22.12402.3750 4.72 311/16 2.65 0.6252.37402.875 5.51 45/8 3.20 0.752.8743.625 6.69 515/16 4.01 0.8753.6244.000 8.27 71/2 4.44 1.003.999

s

c

nb

f

h

o1

o

h1

a

e

i

L L1L12

d

d1

g2

TappedHole w

TappedHole w1

p3p

k

L14

t

t1

uu

1

Low Speed Shaft

High Speed Shaft

0112

109


aSIZE b ec f hg2 i k n o o1 p p3 sh1

M0132

M0232

M0332

M0432

M0532

M0632

M0732

M0832

M0931

M1031

M1331

M1431

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w

M0132

M0232

M0332

M0432M0532

M0632

M0732

M0832

M0931

M1031

M1331

M1431


4.33 4.33 0.47 5.16 5.31 5.51 2.95 - 2.28 11.26 0.98 5.98 2.99 - 5.87 0.39

5.12 4.33 0.63 5.98 5.71 5.51 3.54 - 2.95 12.48 1.38 6.69 3.31 - 7.09 0.39

5.12 4.33 0.63 5.98 5.71 5.51 3.54 - 2.95 12.48 1.38 6.69 3.31 - 7.09 0.39

6.50 5.31 0.79 7.87 7.48 7.09 4.53 - 3.54 14.53 2.17 8.03 3.82 - 8.19 0.59

6.50 5.31 0.79 7.87 7.48 7.09 4.53 - 3.94 14.92 2.17 8.03 3.82 - 8.19 0.59

7.68 5.91 0.94 9.25 8.27 7.09 5.12 0.57 3.94 15.75 2.36 8.66 4.33 9.69 8.43 0.59

8.07 6.69 0.98 9.65 9.06 8.35 5.51 - 4.53 17.32 2.36 9.92 4.69 11.61 9.84 0.75

10.24 8.46 1.38 12.20 11.42 9.84 7.09 - 5.51 21.85 2.95 12.60 6.57 14.17 12.20 0.75

12.20 9.84 1.57 14.37 13.39 11.81 8.86 - 6.30 25.98 3.54 14.65 7.87 17.05 15.51 0.91

14.57 11.42 1.77 17.32 15.75 14.17 9.84 - 7.28 30.79 4.33 16.85 8.86 19.88 17.56 1.06

16.14 13.39 1.97 19.29 17.72 15.75 10.43 - 8.66 35.71 4.33 18.50 9.53 22.17 19.02 1.34

19.69 14.96 1.97 23.23 20.87 18.11 11.81 - 10.24 40.24 5.91 21.50 10.94 24.80 21.69 1.61


1.97 deep1 UNF x

1.97 deep

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep1.1250 2.36 2 1.23 1/4

3/8 UNF1.1245 x .87 deep1.3750 3.15 213/32 1.51 5/16

1/2 UNF1.3745 x 1.10 deep2.1250 4.33 313/16 2.35 1/2

3/4 UNF2.1240 x 1.65 deep2.1250 4.33 313/16 2.35 1/2

3/4 UNF2.1240 x 1.65 deep

0.7500 1.575 19/32 0.829 3/160.74951.0000 1.969 19/16 1.106 1/40.99951.0000 1.969 19/16 1.106 1/40.99951.2500 2.362 2 1.359 1/41.24951.3750 2.756 23/8 1.507 5/161.37451.3750 2.756 23/8 1.507 5/161.37451.6250 3.15 23/8 1.784 3/81.62402.1250 3.937 23/4 2.338 1/22.12402.3750 4.72 311/16 2.65 0.6252.37402.875 5.51 45/8 3.20 0.752.8743.625 6.69 515/16 4.01 0.8753.6244.000 8.27 71/2 4.44 1.003.999

s

c

nb

f

h

o1

o

h1

g6

v2v3

a

e

i

LL12

d

TappedHole w

p3p

k

L1

d1

g2

TappedHole w1

L14

t

t1

uu

1

Low Speed Shaft

High Speed Shaft

0206

110

aSIZE b ec f hg2 i k n o o1 p p3 s


h1

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w


v2 v3g6

M0342

M0442

M0542

M0642

M0742

M0842

M0941

M1041

M1341

M1441

M0342

M0442

M0542

M0642

M0742

M0842

M0941

M1041

M1341

M1441

5.12 4.33 0.63 5.98 5.71 5.51 5.51 3.54 - 2.95 19.80 1.38 6.69 3.31 - 7.09 0.39 2.99 -

6.50 5.31 0.79 7.87 7.48 5.51 7.09 4.53 - 3.54 22.48 2.17 8.03 3.82 - 8.19 0.59 3.58 -

6.50 5.31 0.79 7.87 7.48 5.51 7.09 4.53 - 3.94 22.87 2.17 8.03 3.82 - 8.19 0.59 3.58 -

7.68 5.91 0.94 9.25 8.27 5.51 7.09 5.12 0.57 3.94 23.70 2.36 8.66 4.33 9.69 8.43 0.59 3.58 -

8.07 6.69 0.98 9.65 9.06 5.51 8.35 5.51 - 4.53 25.16 2.36 9.92 4.69 11.61 9.84 0.75 3.58 -

10.24 8.46 1.38 12.20 11.42 7.09 9.84 7.09 - 5.51 29.57 2.95 12.60 6.57 14.17 12.20 0.75 4.53 -

12.20 9.84 1.57 14.37 13.39 7.09 9.84 8.86 - 6.30 32.76 3.54 14.65 7.87 17.05 15.51 0.91 4.45 -

14.57 11.42 1.77 17.32 15.75 7.09 11.81 9.84 - 7.28 37.64 4.33 16.85 8.86 19.88 17.56 1.06 5.43 6.10

16.14 13.39 1.97 19.29 17.72 8.35 13.78 10.43 - 8.66 42.40 4.33 18.50 9.53 22.17 19.02 1.34 7.36 6.10

19.69 14.96 1.97 23.23 20.87 8.35 13.78 11.81 - 10.24 46.93 5.91 21.50 10.94 24.80 21.69 1.61 7.36 6.10

1/4 UNF x 0.71 deep3/8 UNF x 0.86 deep3/8 UNF x 0.75 deep3/8 UNF x 0.75 deep5/8 UNF x 1.25 deep3/4 UNF x 1.50 deep3/4 UNF x 1.65 deep3/4 UNF x 1.65 deep1 UNF x

1.97 deep1 UNF x

1.97 deep

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep

1.0000 1.969 19/16 1.106 1/40.99951.2500 2.362 2 1.359 1/41.24951.3750 2.756 23/8 1.507 5/161.37451.3750 2.756 23/8 1.507 5/161.37451.6250 3.15 23/8 1.784 3/81.62402.1250 3.937 23/4 2.338 1/22.12402.3750 4.72 311/16 2.65 0.6252.37402.875 5.51 45/8 3.20 0.752.8743.625 6.69 515/16 4.01 0.8753.6244.000 8.27 71/2 4.44 1.003.999

s

c

nb

f

h

o1

o

h1

g6

v2v3

a

e

i

LL12

d

TappedHole w

p3p

k

L1

d1

g2

TappedHole w1

L14

t

t1

uu

1

Low Speed Shaft

High Speed Shaft

0206

111


aSIZE b ec f hg2 i k n o o1 p p3 sh1

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w


v2 v3g6

M0352

M0452

M0552

M0652

M0752

M0852

M0951

M1051

M1351

M1451

M0352

M0452

M0552

M0652

M0752

M0852

M0951

M1051

M1351

M1451

5.12 4.33 0.63 5.98 5.71 5.51 5.51 3.54 - 2.95 19.80 1.38 6.69 3.31 - 7.09 0.39 2.99 -

6.50 5.31 0.79 7.87 7.48 5.51 7.09 4.53 - 3.54 22.48 2.17 8.03 3.82 - 8.19 0.59 3.58 -

6.50 5.31 0.79 7.87 7.48 5.51 7.09 4.53 - 3.94 22.87 2.17 8.03 3.82 - 8.19 0.59 3.58 -

7.68 5.91 0.94 9.25 8.27 5.51 7.09 5.12 0.57 3.94 23.70 2.36 8.66 4.33 9.69 8.43 0.59 3.58 -

8.07 6.69 0.98 9.65 9.06 5.51 8.35 5.51 - 4.53 25.16 2.36 9.92 4.69 11.61 9.84 0.75 3.58 -

10.24 8.46 1.38 12.20 11.42 7.09 9.84 7.09 - 5.51 29.57 2.95 12.60 6.57 14.17 12.20 0.75 4.53 -

12.20 9.84 1.57 14.37 13.39 7.09 9.84 8.86 - 6.30 32.76 3.54 14.65 7.87 17.05 15.51 0.91 4.45 -

14.57 11.42 1.77 17.32 15.75 7.09 11.81 9.84 - 7.28 37.64 4.33 16.85 8.86 19.88 17.56 1.06 5.43 6.10

16.14 13.39 1.97 19.29 17.72 8.35 13.78 10.43 - 8.66 42.40 4.33 18.50 9.53 22.17 19.02 1.34 7.36 6.10

19.69 14.96 1.97 23.23 20.87 8.35 13.78 11.81 - 10.24 46.93 5.91 21.50 10.94 24.80 21.69 1.61 7.36 6.10


1.97 deep1 UNF x

1.97 deep

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep

1.0000 1.969 19/16 1.106 1/40.99951.2500 2.362 2 1.359 1/41.24951.3750 2.756 23/8 1.507 5/161.37451.3750 2.756 23/8 1.507 5/161.37451.6250 3.15 23/8 1.784 3/81.62402.1250 3.937 23/4 2.338 1/22.12402.3750 4.72 311/16 2.65 0.6252.37402.875 5.51 45/8 3.20 0.752.8743.625 6.69 515/16 4.01 0.8753.6244.000 8.27 71/2 4.44 1.003.999

s

øe1

p3 p

c1i2

f1

L

L1

k

L12

ød

øb

1

øa

1

h1

v1

TappedHole w

TappedHole w1

L14

øg

6

ød

1

t

t1

uu

1

Low Speed Shaft

High Speed Shaft

øa1SIZE øb1 øe1c1 f1 i2h1 p p3 s v1køg6

0112


M0512

M0612

M0712

M0812

112

Note: Units are also available as C-Flange (B14) Mounting or Base andC-Flange (B14) Mounting, pleasesee page 107 for details

4.72 3.15 0.35 3.94 0.12 1.57 0.35

5.51 3.74 0.35 4.53 0.12 1.57 0.35

6.30 4.33 0.39 5.12 0.14 1.57 0.35

7.87 5.12 0.39 6.50 0.14 1.57 0.47

4.72 3.15 0.39 3.94 0.12 1.97 0.26

5.51 3.74 0.39 4.53 0.12 1.97 0.35

6.30 4.33 0.39 5.12 0.14 1.97 0.35

7.87 5.12 0.39 6.50 0.14 1.97 0.43

5.51 3.74 0.39 4.53 0.12 2.36 0.35

6.30 4.33 0.39 5.12 0.14 2.36 0.35

7.87 5.12 0.43 6.50 0.16 2.36 0.43

9.84 7.09 0.43 8.46 0.16 2.36 0.53

7.87 5.12 0.43 6.50 0.14 3.15 0.43

9.84 7.09 0.43 8.46 0.16 3.15 0.53

11.81 9.06 0.43 10.43 0.16 3.15 0.53

5.51 1.85 10.67 6.10 4.61 2.20

7.09 2.36 12.44 7.01 5.91 2.83

8.35 2.91 14.25 8.50 7.09 3.27

9.84 3.82 17.68 9.92 8.66 3.82

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w


M0512

M0612

M0712

M0812

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep1.1250 2.36 2 1.23 1/4

3/8 UNF1.1245 x .87 deep

0.7500 1.575 19/32 0.829 3/161/4 UNF x

0.7495 0.63 deep1.0000 1.969 19/16 1.106 1/4

1/4 UNF x0.9995 0.71 deep1.2500 2.362 2 1.359 1/4

1/4 UNF x1.2495 0.71 deep1.6250 3.15 23/8 1.784 3/8

5/8 UNF x1.6240 1.25 deep

h1

f1

c1

i2

LL12

ød

TappedHole w

øb

1

øa

1

k

L1

d1

g2

TappedHole w1

L14

t

t1

uu

1

Low Speed Shaft

High Speed Shaft

p3p

p5

4 x øs

øe1

8 x øs

øe1

0112

113


SIZE

M0921

M1021

M1321

M1421

øa1 øb1 c1 øe1 f1 h1 i2 k p p3 søg2

Note: Sizes 01 to 08 are also availableas C-Flange (B14) Mounting,please see page 107 for details.

Sizes1, 2, 3, 4, 5, 6, 7 and 8

Sizes9, 10, 13 and 14

M0122

M0222

M0322

M0422

M0522

M0622

M0722

M0822

p5

4.72 3.15 0.35 3.94 0.12 1.57 0.355.51 3.74 0.35 4.53 0.12 1.57 0.356.30 4.33 0.39 5.12 0.14 1.57 0.357.87 5.12 0.39 6.50 0.14 1.57 0.434.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.434.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.435.51 3.74 0.43 4.53 0.12 2.36 0.356.30 4.33 0.43 5.12 0.14 2.36 0.357.87 5.12 0.43 6.50 0.14 2.36 0.439.84 7.09 0.43 8.46 0.16 2.36 0.535.51 3.74 0.43 4.53 0.12 2.76 0.356.30 4.33 0.43 5.12 0.14 2.76 0.357.87 5.12 0.43 6.50 0.14 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.537.87 5.12 0.43 6.50 0.16 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.5311.81 9.06 0.43 10.43 0.16 2.76 0.537.87 5.12 0.43 6.50 0.14 3.15 0.439.84 7.09 0.43 8.46 0.16 3.15 0.5311.81 9.06 0.43 10.43 0.16 3.15 0.5311.81 9.06 0.67 10.43 0.16 3.94 0.5313.78 9.84 0.67 11.81 0.20 3.94 0.6917.72 13.78 0.71 15.75 0.20 11.81 - 5.51 25.98 7.80 - 9.06 0.71

17.72 13.78 0.87 15.75 0.20 14.17 - 5.51 30.79 9.65 - 10.24 0.71

21.65 17.72 0.98 19.69 0.20 15.75 - 6.69 35.71 11.34 - 10.94 0.71

21.65 17.72 0.98 19.69 0.20 18.11 - 8.27 40.24 12.60 - 12.52 0.71

5.51 - 11.26 - 2.91 2.99

5.51 - 12.48 - 3.54 3.58

5.51 - 12.48 - 3.54 3.58

7.09 - 14.53 - 3.66 4.53

7.09 - 14.92 - 3.66 4.53

7.09 0.57 15.75 4.57 3.31 5.12

8.35 - 17.32 6.10 4.33 5.51

9.84 - 21.85 7.09 5.12 7.17

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w


M0122

M0222

M0322

M0422

M0522

M0622

M0722

M0822

M0921

M1021

M1321

M1421


1.97 deep1 UNF x

1.97 deep

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep1.1250 2.36 2 1.23 1/4

3/8 UNF1.1245 x .87 deep1.3750 3.15 213/32 1.51 5/16

1/2 UNF1.3745 x 1.10 deep1.6250 4.33 311/16 1.79 3/8

5/8 UNF1.6240 x 1.42 deep2.1250 4.33 313/16 2.35 1/2

3/4 UNF2.1240 x 1.65 deep2.1250 4.33 313/16 2.35 1/2

3/4 UNF2.1240 x 1.65 deep

0.7500 1.575 19/32 0.829 3/160.74951.0000 1.969 19/16 1.106 1/40.99951.0000 1.969 19/16 1.106 1/40.99951.2500 2.362 2 1.359 1/41.24951.3750 2.756 23/8 1.507 5/161.37451.3750 2.756 23/8 1.507 5/161.37451.6250 3.15 23/8 1.784 3/81.62402.1250 3.937 23/4 2.338 1/22.12402.3750 4.72 311/16 2.65 0.6252.37402.875 5.51 45/8 3.20 0.752.8743.625 6.69 515/16 4.01 0.8753.6244.000 8.27 71/2 4.44 1.003.999

h1

f1

c1

i2

LL12

ød

TappedHole w

øb

1

øa

1

k

L1

d1

g2

TappedHole w1

L14

t

t1

uu

1

Low Speed Shaft

High Speed Shaft

p3p

p5

4 x øs

øe1

8 x øs

øe1

0112

114


Note: Sizes 01 to 08 are also availableas C-Flange (B14) Mounting,please see page 107 for details.

Sizes1, 2, 3, 4, 5, 6, 7 and 8

Sizes9, 10, 13 and 14

SIZE øa1 øb1 c1 øe1 f1 h1 i2 k p p3 søg2

M0132

M0232

M0332

M0432

M0532

M0632

M0732

M0832

p5

4.72 3.15 0.35 3.94 0.12 1.57 0.355.51 3.74 0.35 4.53 0.12 1.57 0.356.30 4.33 0.39 5.12 0.14 1.57 0.357.87 5.12 0.39 6.50 0.14 1.57 0.434.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.434.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.435.51 3.74 0.43 4.53 0.12 2.36 0.356.30 4.33 0.43 5.12 0.14 2.36 0.357.87 5.12 0.43 6.50 0.14 2.36 0.439.84 7.09 0.43 8.46 0.16 2.36 0.535.51 3.74 0.43 4.53 0.12 2.76 0.356.30 4.33 0.43 5.12 0.14 2.76 0.357.87 5.12 0.43 6.50 0.14 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.537.87 5.12 0.43 6.50 0.16 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.5311.81 9.06 0.43 10.43 0.16 2.76 0.537.87 5.12 0.43 6.50 0.14 3.15 0.439.84 7.09 0.43 8.46 0.16 3.15 0.5311.81 9.06 0.43 10.43 0.16 3.15 0.5311.81 9.06 0.67 10.43 0.16 3.94 0.5313.78 9.84 0.67 11.81 0.20 3.94 0.6917.72 13.78 0.71 15.75 0.20 11.81 - 5.51 25.98 7.80 - 9.06 0.71

17.72 13.78 0.87 15.75 0.20 14.17 - 5.51 30.79 9.65 - 10.24 0.71

21.65 17.72 0.98 19.69 0.20 15.75 - 6.69 35.71 11.34 - 10.94 0.71

21.65 17.72 0.98 19.69 0.20 18.11 - 8.27 40.24 12.60 - 12.52 0.71

5.51 - 11.26 - 2.91 2.99

5.51 - 12.48 - 3.54 3.58

5.51 - 12.48 - 3.54 3.58

7.09 - 14.53 - 3.66 4.53

7.09 - 14.92 - 3.66 4.53

7.09 0.57 15.75 4.57 3.31 5.12

8.35 - 17.32 6.10 4.33 5.51

9.84 - 21.85 7.09 5.12 7.17

M0931

M1031

M1331

M1431

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w


M0132

M0232

M0332

M0432

M0532

M0632

M0732

M0832

M0931

M1031

M1331

M1431


1.97 deep1 UNF x

1.97 deep

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep1.1250 2.36 2 1.23 1/4

3/8 UNF1.1245 x .87 deep1.3750 3.15 213/32 1.51 5/16

1/2 UNF1.3745 x 1.10 deep2.1250 4.33 313/16 2.35 1/2

3/4 UNF2.1240 x 1.65 deep2.1250 4.33 313/16 2.35 1/2

3/4 UNF2.1240 x 1.65 deep

0.7500 1.575 19/32 0.829 3/160.74951.0000 1.969 19/16 1.106 1/40.99951.0000 1.969 19/16 1.106 1/40.99951.2500 2.362 2 1.359 1/41.24951.3750 2.756 23/8 1.507 5/161.37451.3750 2.756 23/8 1.507 5/161.37451.6250 3.15 23/8 1.784 3/81.62402.1250 3.937 23/4 2.338 1/22.12402.3750 4.72 311/16 2.65 0.6252.37402.875 5.51 45/8 3.20 0.752.8743.625 6.69 515/16 4.01 0.8753.6244.000 8.27 71/2 4.44 1.003.999

h1

f1

c1

i2

LL12

ød

TappedHole w

øb

1

øa

1

v2v3

k

L1

d1

g2

TappedHole w1

L14

t t1

u u1

Low Speed Shaft High Speed Shaft

p3p

p5

4 x øs

øe1

8 x øs

øe1

0206

115


SIZE

M0941

M1041

M1341

M1441

øa1 øb1 c1 øe1 f1 h1 i2 k p p3 søg2 v2 v3

M0342

M0442

M0542

M0642

M0742

M0842


p5

Sizes3, 4, 5, 6, 7 and 8

Sizes9, 10, 13 and 14

4.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.435.51 3.74 0.43 4.53 0.12 2.36 0.356.30 4.33 0.43 5.12 0.14 2.36 0.357.87 5.12 0.43 6.50 0.14 2.36 0.439.84 7.09 0.43 8.46 0.16 2.36 0.535.51 3.74 0.43 4.53 0.12 2.76 0.356.30 4.33 0.43 5.12 0.14 2.76 0.357.87 5.12 0.43 6.50 0.14 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.537.87 5.12 0.43 6.50 0.16 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.5311.81 9.06 0.43 10.43 0.16 2.76 0.537.87 5.12 0.43 6.50 0.14 3.15 0.439.84 7.09 0.43 8.46 0.16 3.15 0.5311.81 9.06 0.43 10.43 0.16 3.15 0.5311.81 9.06 0.67 10.43 0.16 3.94 0.5313.78 9.84 0.67 11.81 0.20 3.94 0.6917.72 13.78 0.71 15.75 0.20 7.09 - 5.51 32.76 7.80 - 9.06 0.71 4.53 -

17.72 13.78 0.87 15.75 0.20 8.35 - 5.51 37.64 9.65 - 10.24 0.71 5.51 6.10

21.65 17.72 0.98 19.69 0.20 8.35 - 6.69 42.40 11.34 - 10.94 0.71 5.51 6.10

21.65 17.72 0.98 19.69 0.20 8.35 - 8.27 46.93 12.60 - 12.52 0.71 5.51 6.10

5.51 - 19.80 - 3.54 3.58 2.99 -

5.51 - 22.48 - 3.66 4.53 3.58 -

5.51 - 22.87 - 3.66 4.53 3.58 -

5.51 - 23.70 4.57 3.31 5.12 3.58 -

5.51 - 25.16 6.10 4.33 5.51 3.58 -

7.09 - 29.57 7.09 5.12 7.17 4.53 -

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w


M0342

M0442

M0542

M0642

M0742

M0842

M0941

M1041

M1341

M1441


1.97 deep1 UNF x

1.97 deep

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep0.8750 1.97 19/32 0.96 3/16

5/16 UNF0.8745 x .63 deep

1.0000 1.969 19/16 1.106 1/40.99951.2500 2.362 2 1.359 1/41.24951.3750 2.756 23/8 1.507 5/161.37451.3750 2.756 23/8 1.507 5/161.37451.6250 3.15 23/8 1.784 3/81.62402.1250 3.937 23/4 2.338 1/22.12402.3750 4.72 311/16 2.65 0.6252.37402.875 5.51 45/8 3.20 0.752.8743.625 6.69 515/16 4.01 0.8753.6244.000 8.27 71/2 4.44 1.003.999

0206

116

DIMENSIONS - QUINTUPLE REDUCTIONFLANGE MOUNT


Sizes3, 4, 5, 6, 7 and 8

Sizes9, 10, 13 and 14

h1

f1

c1

i2

LL12

ød

TappedHole w

øb

1

øa

1

v2v3

k

L1

d1

g2

TappedHole w1

L14

t t1

u u1

Low Speed Shaft High Speed Shaft

p3p

p5

4 x øs

øe1

8 x øs

øe1

SIZE øa1 øb1 c1 øe1 f1 h1 i2 k p p3 søg2 v2 v3

M0352

M0452

M0552

M0652

M0752

M0852

p5

4.72 3.15 0.39 3.94 0.12 1.97 0.265.51 3.74 0.39 4.53 0.12 1.97 0.356.30 4.33 0.39 5.12 0.14 1.97 0.357.87 5.12 0.39 6.50 0.14 1.97 0.435.51 3.74 0.43 4.53 0.12 2.36 0.356.30 4.33 0.43 5.12 0.14 2.36 0.357.87 5.12 0.43 6.50 0.14 2.36 0.439.84 7.09 0.43 8.46 0.16 2.36 0.535.51 3.74 0.43 4.53 0.12 2.76 0.356.30 4.33 0.43 5.12 0.14 2.76 0.357.87 5.12 0.43 6.50 0.14 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.537.87 5.12 0.43 6.50 0.16 2.76 0.439.84 7.09 0.43 8.46 0.16 2.76 0.5311.81 9.06 0.43 10.43 0.16 2.76 0.537.87 5.12 0.43 6.50 0.14 3.15 0.439.84 7.09 0.43 8.46 0.16 3.15 0.5311.81 9.06 0.43 10.43 0.16 3.15 0.5311.81 9.06 0.67 10.43 0.16 3.94 0.5313.78 9.84 0.67 11.81 0.20 3.94 0.6917.72 13.78 0.71 15.75 0.20 7.09 - 5.51 32.76 7.80 - 9.06 0.71 4.53 -

17.72 13.78 0.87 15.75 0.20 8.35 - 5.51 37.64 9.65 - 10.24 0.71 5.51 6.10

21.65 17.72 0.98 19.69 0.20 8.35 - 6.69 42.40 11.34 - 10.94 0.71 5.51 6.10

21.65 17.72 0.98 19.69 0.20 8.35 - 8.27 46.93 12.60 - 12.52 0.71 5.51 6.10

5.51 - 19.80 - 3.54 3.58 2.99 -

5.51 - 22.48 - 3.66 4.53 3.58 -

5.51 - 22.87 - 3.66 4.53 3.58 -

5.51 - 23.70 4.57 3.31 5.12 3.58 -

5.51 - 25.16 6.10 4.33 5.51 3.58 -

7.09 - 29.57 7.09 5.12 7.17 4.53 -

M0951

M1051

M1351

M1451

d1SIZE

L1 L14 t1 w1u1 d L L12 t u w


M0352

M0452

M0552

M0652

M0752

M0852

M0951

M1051

M1351

M1451


1.97 deep1 UNF x

1.97 deep

0.6250 1.57 19/32 0.70 3/161/4 UNF

0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.6250 1.57 19/32 0.70 3/16

1/4 UNF0.6245 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep0.7500 1.57 19/32 0.83 3/16

1/4 UNF0.7495 x .63 deep

1.0000 1.969 19/16 1.106 1/40.99951.2500 2.362 2 1.359 1/41.24951.3750 2.756 23/8 1.507 5/161.37451.3750 2.756 23/8 1.507 5/161.37451.6250 3.15 23/8 1.784 3/81.62402.1250 3.937 23/4 2.338 1/22.12402.3750 4.72 311/16 2.65 0.6252.37402.875 5.51 45/8 3.20 0.752.8743.625 6.69 515/16 4.01 0.8753.6244.000 8.27 71/2 4.44 1.003.999

M0512

M0612

M0712

M0812

0106

DIMENSIONS -C-FLANGE (B14) MOUNTING

Column 9 Entry

E C-Flange (B14) Mounting (For sizes M01 to M08 only)

V Base and C-Flange (B14) Mounting (available as standard for single reduction units only, other unitscan be supplied as special units)

SIZE F7 i 3 ø Q ø R

SIZE F7 i3 ø Q ø R

M01

M02 / M03

M04 / M05

M06 / M07

M08

117

2.95 4 Holes M8 x 1.25 2.13 3.86 2.0512 Deep

3.78 4 Holes M8 x 1.25 2.44 4.53 2.9515 Deep

4.13 4 Holes M12 x 1.75 2.91 / 3.31 5.12 3.3521 Deep

4.88 6 Holes M12 x 1.75 3.31 / 3.70 5.98 4.0221 Deep

6.69 8 Holes M12 x 1.75 4.72 7.68 5.7121 Deep

Single Stage Units

2, 3, 4 & 5 Stage Units

TAPPEDHOLES F7

øQ

øR

(h6)

i3

FOUR HOLEPATTERN

SIX HOLEPATTERN EIGHT HOLE

PATTERN

60

o

22.5

o

øe5

øe5 øe5

øe5

øe5

2.95 4 Holes M8 x 1.25 2.13 3.86 2.0512 Deep

3.78 4 Holes M8 x 1.25 2.44 4.53 2.9515 Deep

4.13 4 Holes M12 x 1.75 2.91 5.12 3.3521 Deep

4.88 6 Holes M12 x 1.75 3.70 5.98 4.0221 Deep

Thermal Ratings (HP)

Thermal ratings are a measure of the units ability to dissipate heat, if they are exceeded the lubricant may break downresulting in premature gear failure.

Note: When checking thermal capacities use actual load required to be transmitted, not rating of prime mover.

Thermal Power (HP) - Two Stage Units

OverallRatios

InputRev/min

Unit Size

M04 M05 M06 M07 M08 M09 M10 M13 M14

THERMAL POWER RATING0107

118

Type ofCooling M03M02M01

Units with 3500 Consult Textron Power Transmission

1.4 to 5.6 no additional 1750 5.5 8.0 8.0 13.2 13.2 15.3 19.3 29.5 41.9 56.5 71.7 97.9

cooling 1160 5.3 7.6 7.6 12.6 12.6 14.6 18.4 28.2 40.0 54.0 68.5 93.5

875 5.1 7.4 7.4 12.2 12.2 14.2 17.9 27.3 38.8 52.3 66.3 90.6

Units with 3500 3.8 5.5 5.5 9.2 9.2 10.7 13.5 20.7 29.3 39.5 50.1 68.4

6.3 & over no additional 1750 5.4 7.8 7.8 13.0 13.0 15.0 19.0 29.1 41.3 55.6 70.6 96.3

cooling 1160 5.2 7.4 7.4 12.4 12.4 14.3 18.1 27.8 39.4 53.1 67.4 92.0

875 5.0 7.2 7.2 12.0 12.0 13.9 17.6 26.9 38.2 51.4 65.3 89.1

3500 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

1.4 to 5.6 Units with 1750 - - - - - - 43.4 66.4 94.3 127.1 161.3 220.3

Fan cooling 1160 - - - - - - 36.2 55.3 78.6 105.9 134.4 183.6

875 - - - - - - 31.4 47.9 68.1 91.8 116.5 159.1

3500 - - - - - - N/A N/A N/A N/A N/A N/A

6.3 & over Units with 1750 - - - - - - 42.8 65.5 92.9 125.1 158.9 216.7

Fan cooling 1160 - - - - - - 35.6 54.6 77.4 104.3 132.4 180.6

875 - - - - - - 30.9 47.3 67.1 90.4 114.7 156.5

Thermal Power (HP) - Single Stage Units

OverallRatios

InputRev/min

Unit Size

M08

Type ofCooling M07M06M05

Units with 3500 4.0 9.7 13.9 20.3

no additional 1750 5.7 13.6 19.6 28.6

cooling 1160 5.4 13.0 18.7 27.3

All 875 5.3 12.6 18.1 26.5

3500 - - N/A N/A

Units with 1750 - - 44.1 64.4

Fan cooling 1160 - - 35.1 51.2

875 - - 29.5 43.0

119

0311

FAN COOLED UNITS

M0722 8.86 17.32 1.38 1.28

M0822 10.43 21.85 1.77 2.0

M0921 12.60 25.98 2.56 2.40

M1021 14.96 30.79 3.74 3.69

M1321 16.54 35.71 3.35 3.81

M1421 18.90 40.24 3.35 3.81

UnitSize øB8 L15 L16k

Dimensions of Fan Cooled Units

For reducer fan kit modules enter S in column 10

or if used in conjunction with a reducer backstop module kit Y CW rotation

Z CCW rotation

Column 10 Entry

FAN COOLED UNITS

Single Reduction Units

Double Reduction Units

UnitSize øB8 L15 L16k

M0712 8.86 14.25 1.38 1.28

M0812 10.43 17.68 1.77 2.00

k

L15

L16 Shaft enddetail as

standard unit

øB

8

k

L15

L16

øB

8

Shaft enddetail as

standard unit

CW

UnitSize

Rotation of outputshaft must be specified when ordering as viewedfrom the outputshaft end (as shown in the diagram)

CW - Free Rotation - ClockwiseLocked - Counterclockwise

CCW - Free Rotation - CounterclockwiseLocked - Clockwise

The reducer units listed below can be fitted with an internal backstop, this has no effect on the external unitsize. The backstop device incorporates high quality centrifugal lift off sprags which are wear free above the liftoff speed (‘n’ min). To ensure correct operation input speed must exceed lift off speed.

Suitable for ambient temperature -40oF to + 122oF (-40oC to + 50oC)

Lift offSpeed (‘n’ min)(at inputshaft)

(rev/min)

For reducer backstop modules enter W for CCW rotation (or Z if used in conjunction with a fan kit)

X for CW rotation (or Y if used in conjunction with a fan kit)

Column 10 Entry

0311

REDUCER BACKSTOP MODULE

120

RatedLocking Torque

(‘T max’)(at inputshaft)

(lb.in)

M0422 800 885

M0522 800 885

M0612 800 885

M0622 800 885

M0712 670 1504

M0722 670 1504

M0732 800 885

M0812 670 2655

M0822 670 2655

M0832 670 1504

M0921 620 8320

M0931 670 2655

M1021 550 11152

M1031 670 2655

M1321 550 21242

M1331 550 21242

M1421 550 21242

M1431 550 21242

SHIPPING SPECIFICATION

121

0311

Basemount Units Weight (Pounds)

Total Weight of Gearmotor = Gearbox Weight plus Motor Weight

IEC FRAME Motor Weight - Pounds63 1071 1480A 2180B 2490S 3090L 3290LA 44100L 53112M 68112MA 99132SA 106132M 115132MA 172132MB 194160M 249160L 293180M 368180L 399200L 512225S 633225M 710250M 849280S 1125280M 1324

NEMA FRAME Motor Weight - Pounds56C 25143TC 30145TC 40182TC 55184TC 77213TC 115215TC 160254TC 285256TC 310284TC 430286TC 445324TC 525326TC 650364TC 715365TC 840404TC 1060405TC 1200

Mass lb’s REDUCER UNIT 18 19 26 29 26 29 47 48 49 50 73 75 16 49 50 73 75 29 59 60 88 90

63 20 21 27 30 27 30 48 49 - 48 72 74 19 - 48 72 74 28 - 58 87 89

71 20 21 27 30 27 30 48 49 - 48 72 74 21 - 48 72 74 28 - 58 87 89

80 20 21 28 31 28 31 49 50 48 49 72 74 21 48 49 72 74 28 58 59 87 89

90 22 23 29 32 29 32 50 51 49 50 73 75 23 49 50 73 75 30 59 60 88 90

100/112 23 24 31 34 31 34 52 - 55 56 79 - 29 55 56 79 - 31 65 66 94 --

132 - - - - - - - - 58 - - - - 58 - - - 37 68 - - -

56C 20 21 29 32 29 32 50 51 48 49 72 74 23 48 49 72 74 30 58 59 87 89

143-145TC 20 21 29 32 29 32 50 51 48 49 72 74 23 48 49 72 74 30 58 59 87 89

182-184TC 23 24 31 34 32 34 53 54 63 64 87 89 29 63 64 87 89 45 73 74 102 104

213-215TC - - - - - - - - 63 - - - - 63 - - - 45 - - - -

MOTORISEDNEMA Unit

Without Motor

M01

22

M01

32

M02

22

M02

32

M03

22

M03

32

M03

42

M03

52

M04

22

M04

32

M04

42

M04

52

M05

12

M05

22

M05

32

M05

42

M05

52

M06

12

M06

22

M06

32

M06

42

M06

52UNIT SIZE & No OFREDUCTIONS

MOTORISEDIEC Unit

Without Motor

MOTORISEDNEMA Unit

Without Motor

M07

12

M07

22

M07

32

M07

42

M07

52

M08

12

M08

22

M08

32

M08

42

M08

52

M09

21

M09

31

M09

41

M09

51

M10

21

M10

31

M10

41

M10

51

M13

21

M13

31

M13

41

M13

51

M14

21

M14

31

M14

41

M14


MOTORISEDIEC Unit

Without Motor

Mass lb’s REDUCER UNIT 53 84 86 106 108 77 148 163 212 212 252 272 309 309 375 395 450 460 547 596 615 617 794 893 871 873

63 104 108 224 222 327

71 104 108 224 222 327

80 51 82 84 104 106 91 160 164 224 228 258 280 321 327 401 427 437 743 755 984 995

90 51 82 84 104 106 91 160 164 224 228 258 280 321 327 401 430 440 743 755 984 995

100/112 53 84 86 106 91 160 164 224 258 280 321 360 401 435 445 527 597 750 765 758 869 991 1003

132 57 88 90 91 160 164 258 360 401 440 527 597 750 765 758 869 991 1003

160 77 108 111 180 278 380 422 547 617 788 889

180 278 380 422 547 617 788 889

200 278 380 547 617 788 889

225 305 410 575 646 818 917

250 683 926

280 683 926

56C 55 86 88 108 110 87 156 146 212 210 280 308 330 448 492 779 759 948 938

143-145TC 55 86 88 108 110 87 156 146 212 210 280 308 330 448 492 779 759 948 938

182-184TC 68 99 101 121 123 87 156 159 225 225 248 280 325 346 352 394 461 505 510 581 779 772 833 948 951

213-215TC 68 99 87 156 159 225 225 248 280 325 346 352 394 461 505 510 581 779 772 746 833 948 951

254-256TC 68 99 87 156 264 280 371 410 515 586 746 838

284-286TC 269 376 415 515 586 751 838

324-326TC 273 380 419 521 592 756 844

364-365TC 661 732 889 894

404-405TC 675 746 896 998

Flangemount Units Weight (Pounds)

Total Weight of Gearmotor = Gearbox Weight plus Motor Weight

IEC FRAME Motor Weight - Pounds63 1071 1480A 2180B 2490S 3090L 3290LA 44100L 53112M 68112MA 99132SA 106132M 115132MA 172132MB 194160M 249160L 293180M 368180L 399200L 512225S 633225M 710250M 849280S 1125280M 1324

NEMA FRAME Motor Weight - Pounds56C 25143TC 30145TC 40182TC 55184TC 77213TC 115215TC 160254TC 285256TC 310284TC 430286TC 445324TC 525326TC 650364TC 715365TC 840404TC 1060405TC 1200

SHIPPING SPECIFICATION

122

0311

MOTORISEDNEMA Unit

Without Motor

M01

22

M01

32

M02

22

M02

32

M03

22

M03

32

M03

42

M03

52

M04

22

M04

32

M04

42

M04

52

M05

12

M05

22

M05

32

M05

42

M05

52

M06

12

M06

22

M06

32

M06

42

M06


MOTORISEDIEC Unit

Without Motor

Mass lb’s REDUCER UNIT 19 20 28 32 28 32 49 50 51 52 77 79 18 53 52 78 80 32 63 64 93 95

63 21 22 27 33 29 33 50 51 - 50 76 78 21 - 50 77 79 31 - 62 92 94

71 21 22 27 33 29 33 50 51 - 50 76 78 23 - 50 77 79 31 - 62 92 94

80 21 22 28 34 30 34 51 52 50 51 76 78 23 52 51 77 79 31 62 63 92 94

90 23 24 30 35 31 35 52 53 51 52 77 79 25 53 52 78 80 33 63 64 93 95

100/112 24 25 31 37 33 37 54 - 57 58 83 - 31 59 58 84 - 34 69 70 99 -

132 - - - - - - - - 60 - - - - 62 - - - 40 72 - - -

56C 21 22 29 35 31 35 52 53 50 51 76 78 25 52 51 77 79 33 62 63 92 94

143-145TC 21 22 29 35 31 35 52 53 50 51 76 78 25 52 51 77 79 33 62 63 92 94

182-184TC 24 25 31 35 34 37 55 56 65 66 91 93 31 67 66 92 94 48 77 78 107 109

213-215TC - - - - - - - - 65 - - - - 67 - - - 48 - - - -

MOTORISEDNEMA Unit

Without Motor

M07

12

M07

22

M07

32

M07

42

M07

52

M08

12

M08

22

M08

32

M08

42

M08

52

M09

21

M09

31

M09

41

M09

51

M10

21

M10

31

M10

41

M10

51

M13

21

M13

31

M13

41

M13

51

M14

21

M14

31

M14

41

M14


MOTORISEDIEC Unit

Without Motor

Mass lb’s REDUCER UNIT 57 88 90 110 112 86 157 172 221 221 259 279 316 316 384 404 441 451 540 589 608 610 750 849 827 829

63 108 112 233 231 334

71 108 112 233 231 334

80 55 86 88 108 110 100 169 173 233 237 265 287 328 334 410 418 428 736 748 940 951

90 55 86 88 108 110 100 169 173 233 237 265 287 328 334 410 421 431 736 748 940 951

100/112 57 88 90 110 100 169 173 233 265 287 328 369 410 426 436 520 590 743 758 714 825 947 959

132 61 92 94 100 169 173 265 369 410 431 520 590 743 758 714 825 947 959

160 81 112 120 189 285 389 431 540 610 744 845

180 285 389 431 540 610 744 845

200 285 389 540 610 744 845

225 312 419 568 639 774 873

250 676 882

280 676 882

56C 59 90 92 112 114 96 165 155 221 219 287 315 337 457 501 772 752 904 894

143-145TC 59 90 92 112 114 96 165 155 221 219 287 315 337 457 501 772 752 904 894

182-184TC 72 103 105 125 127 96 165 168 234 234 255 287 332 353 361 403 470 514 503 574 772 765 789 904 907

213-215TC 72 103 4 96 165 168 234 234 255 287 332 353 361 403 470 514 503 574 772 765 702 789 904 907

254-256TC 72 103 96 165 271 287 380 419 508 579 702 794

284-286TC 276 385 424 508 579 707 794

324-326TC 280 389 428 514 585 712 800

364-365TC 654 725 845 850

404-405TC 668 739 852 954

NOTES

123

NOTES

124

NOTES

125

NOTES

126

0004

PRODUCT SAFETY

Product Safety Information

General - The following information is important in ensuring safety. It must be brought to the attention of personnel involved in the selectionof Textron Power Transmission equipment, those responsible for the design of the machinery in which it is to be incorporated and thoseinvolved in its installation, use and maintenance.

Textron Power Transmission equipment will operate safely provided it is selected, installed, used and maintained properly. As with anypower transmission equipment proper precautions must be taken as indicated in the following paragraphs, to ensure safety.

Potential Hazards - these are not necessarily listed in any order of severity as the degree of danger varies in individual circumstances. It isimportant therefore that the list is studied in its entirety:-

1) Fire/Explosion(a) Oil mists and vapour are generated within gear units. It is therefore dangerous to use naked lights in the proximity of gearbox

openings, due to the risk of fire or explosion.

(b) In the event of fire or serious overheating (over 570 oF (300 oC)), certain materials (rubber, plastics, etc.) may decompose andproduce fumes. Care should be taken to avoid exposure to the fumes, and the remains of burned or overheated plastic/rubbermaterials should be handled with rubber gloves.

2) Guards - Rotating shafts and couplings must be guarded to eliminate the possibility of physical contact or entanglement of clothing. Itshould be of rigid construction and firmly secured.

3) Noise - High speed gearboxes and gearbox driven machinery may produce noise levels which are damaging to the hearing withprolonged exposure. Ear defenders should be provided for personnel in these circumstances. Reference should be made to theDepartment of Employment Code of Practice for reducing exposure of employed persons to noise.

4) Lifting - Where provided (on larger units) only the lifting points or eyebolts must be used for lifting operations (see maintenance manualor general arrangement drawing for lifting point positions). Failure to use the lifting points provided may result in personal injury and/ordamage to the product or surrounding equipment. Keep clear of raised equipment.

5) Lubricants and Lubrication(a) Prolonged contact with lubricants can be detrimental to the skin. The manufacturer's instruction must be followed when handling

lubricants.

(b) The lubrication status of the equipment must be checked before commissioning. Read and carry out all instructions on the lubricantplate and in the installation and maintenance literature. Heed all warning tags. Failure to do so could result in mechanical damageand in extreme cases risk of injury to personnel.

6) Electrical Equipment - Observe hazard warnings on electrical equipment and isolate power before working on the gearbox or associatedequipment, in order to prevent the machinery being started.

7) Installation, Maintenance and Storage(a) In the event that equipment is to be held in storage, for a period exceeding 6 months, prior to installation or commissioning, Textron

Power Transmission must be consulted regarding special preservation requirements. Unless otherwise agreed, equipment must bestored in a building protected from extremes of temperature and humidity to prevent deterioration.

The rotating components (gears and shafts) must be turned a few revolutions once a month (to prevent bearings brinelling).

(b) External gearbox components may be supplied with preservative materials applied, in the form of a "waxed" tape overwrap or waxfilm preservative. Gloves should be worn when removing these materials. The former can be removed manually, the latter usingwhite spirit as a solvent.

Preservatives applied to the internal parts of the gear units do not require removal prior to operation.

(c) Installation must be performed in accordance with the manufacturer's instructions and be undertaken by suitably qualified personnel.

(d) Before working on a gearbox or associated equipment, ensure that the load has been removed from the system to eliminate thepossibility of any movement of the machinery and isolate power supply. Where necessary, provide mechanical means to ensure themachinery cannot move or rotate. Ensure removal of such devices after work is complete.

(e) Ensure the proper maintenance of gearboxes in operation. Use only the correct tools and Textron Power Transmission approvedspare parts for repair and maintenance. Consult the Maintenance Manual before dismantling or performing maintenance work.

8) Hot Surfaces and Lubricants(a) During operation, gear units may become sufficiently hot to cause skin burns. Care must be taken to avoid accidental contact.

(b) After extended running the lubricant in gear units and lubrication systems may reach temperatures sufficient to cause burns. Allowequipment to cool before servicing or performing adjustments.

9) Selection and Design(a) Where gear units provide a backstop facility, ensure that back-up systems are provided if failure of the backstop device would

endanger personnel or result in damage.

(b) The driving and driven equipment must be correctly selected to ensure that the complete machinery installation will performsatisfactorily, avoiding system critical speeds, system torsional vibration, etc.

(c) The equipment must not be operated in an environment or at speeds, powers, torques or with external loads beyond those for whichit was designed.

(d) As improvements in design are being made continually the contents of this catalogue are not to be regarded as binding in detail, and drawings and capacities are subject to alterations without notice.

The above guidance is based on the current state of knowledge and our best assessment of the potential hazards in the operation ofthe gear units.

Any further information or clarification required may be obtained by contacting Textron Power Transmission.

IMPORTANT

AUSTRALIA

David Brown Gear

Industries Ltd

13-19 Franklin AvenueBulli, NSW 2516AustraliaTel: +61 2 4283 0300Fax: +61 2 4283 0333

AUSTRIA

Benzler Antriebst

Ges mbH

Urnenhainweg 7AT-4050 TraunAustriaTel: +43 7 229 618 91Fax: +43 7 229 618 84

BELGIUM

SA David Brown Sadi

Benzlers NV

Contact the Northern EuropeanService Centre (Netherlands)Tel: +32 13 66 10 58Fax: +32 13 66 23 37

CHINA

Textron Power Transmission

ChinaRoom 601 Lippo PlazaNo. 222 Huai Hai Zhong RdShanghai 200021China Tel: +86 21 53966 555

Fax: +86 21 53966 913

DENMARK

Benzler Transmission A/S

Hammerholmen 39DK-2650 HvidovreDenmarkTel: +45 36 34 03 00Fax: +45 36 77 02 42

FINLAND

Oy Benzler AB

PB 3FI 02211 EspooFinlandTel: +358 9 8870 630Fax: +358 9 8870 631

FRANCE

WECO

33 Rue Henri-Lebert, BP 4868801 Thann CedexFranceTel: +33 3 89 37 01 13Fax: +33 3 89 37 39 36

GERMANY

Benzler Germany

Contact the Northern EuropeanService Centre (Netherlands)Tel: 0800 350 40 00Fax: 0800 350 40 01

HUNGARY

Benzler Antriebst

Ges mbH

Urnenhainweg 7AT-4050 TraunAustriaTel: +43 7 229 618 91Fax: +43 7 229 618 84

ITALY

Benzler Ferri SpA

Via F.IIi Rosselli 16IT 42019 Scandiano (RE)ItalyTel: +39 05 22 763314Fax: +39 05 22 981758

MALAYSIA

Benzler (M) Sdn Bhd

No 24 Jalan TPJ 3Taman PerindustrianJaya SubangMY 47200 SelangorMalaysiaTel: +60 3 745 0668Fax: +60 3 746 1436

NETHERLANDS

Northern European

Service Centre & HQ

Benzlers Netherland

Postbox 3303NL 5902 Venlo RHNetherlandsTel: +31 773 245 900Fax: +31 773 245 901

NORWAY


(Norge)

Incorporating Benzler A/S &David Brown Hydraulics Norway A/SPO Box 73 LeirdalStromsveien 372NO- 1008 Oslo, NorwayTel: +47 22 90 94 30Fax: +47 22 90 94 11

PHILIPPINES

David Brown John Welsh

Custom Build (Pty) Ltd

Unit 1402Richville Corporate Tower1107 Alabang-Zapote RoadMadrigal Business ParkAlabangMuntinlupa City 1770PhilippinesTel: +63 6 807 8885Fax: +63 6 807 2658

SOUTH AFRICA

David Brown

Gear Industries Ltd

PO Box 540, Benoni 1500South AfricaTel: +27 11 748 0000Fax: +27 11 421 2963

David Brown

Gear Industries Ltd

PO Box 36882Chempet 7442Cape TownSouth AfricaTel: +27 21 551 2163Fax: +27 21 551 2164

SWEDEN

AB Benzlers

PO Box 922SE-251 09 HelsingborgSwedenTel: +46 42 18 6800Fax: +46 42 21 8803

THAILAND

David Brown

(Thailand) Ltd

Level 5 Sermsrap Building169/98 Ratchadapisek RoadDin Daeng, Bangkok 10320ThailandTel: +66 2 276 9504Fax: +66 2 276 9503

UNITED KINGDOM


Corporate HQ

Park RoadLockwood, HuddersfieldWest Yorkshire. HD4 5DDTel: +44 (0) 1484 465500Fax: +44 (0) 1484 465501

David Brown Engineering Ltd

Park RoadLockwood, HuddersfieldWest Yorkshire. HD4 5DDSales

Tel: 0800 970 4001Fax: 0800 970 4002

Service & Spare PartsTel: 0800 970 4003Fax: 0800 970 4004

USA

Cone Drive Textron

240 East 12th StreetTraverse CityMI 49684USATel: +1 231 946 8410Fax: +1 231 933 8600


4015 Executive Park DriveSuite 401CincinnatiOhio 45241USATel: +1 513 554 1811Fax: +1 513 554 1813

Contact Textron Power Transmission0311



Documents

Series M - Akron Gearsales.akrongear.com/documents/catalogs/textron/Series M...reducer Two stage base mounted reducer Two stage base mounted motorized Single stage base mounted motorized