Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
* Performance dependent on glass selection. Please contact your EFCO sales rep for project specific performance.
WATER RESISTANCE(ASTM E547 & E331)
AIR INFILTRATION(ASTM E283)
CRF(AAMA 1503)
U-FACTOR*(ANSI/NFRC 100/200)
STC*(ASTM E90 & E413)
OITC*(ASTM E90 & E413)
STRUCTURAL LOAD(ASTM E330)
AAMA RATING(A440)
FORCED ENTRY(ASTM F588 OR F842)
ACCESSIBILITY(AAMA 513)
S TA N D A R D F E AT U R E S
1000 COUNTY RD • MONETT, MO 65708 • 800.221.4169 • efcocorp.com Disclaimer: Info subject to change at any time Updated: 12/2019
S E R I E S 4 5 0 X / 4 5 0 G
• 35 mm E-StrutTM thermal isolator• Vertical or horizontal stacking members• Dual glazing with optional integral blinds• Pressure equalization• Angle reinforced vent corners• Wide variety of locking and operating
hardware available• Accessory line of subframes, mullions, and
architectural sills• Anodized or painted finishes available• Screen frames of extruded aluminum alloy
are available• Snap-In grid available with 450G version
The 450X and 450G XTherm™ window series, were developed to meet the increasing energy-effi-ciency demands of today’s marketplace. The deeper, strutted thermal break allows for triple glazing while also providing superior thermal separation of the framing materials. This window system is an attractive and versatile product that can be utilized on a wide range of applications from educational, to office and healthcare facilities. Offered with a complete line of thermal subframes, mullions, and architectural sills, the 450X and 450G provide the complete solution for your fenestration needs.
FX: AW150PO: AW120
FX: <0.10 CFM/FT2
PO: <0.10 CFM/FT2
FX: +/- 225.56 PSFPO: +/- 180.45 PSF
FX: 15 PSFPO: 15 PSF
FX: 0.24 - 0.54PO: 0.36 - 0.59
FX: 75PO: 74
FX: 35 - 44PO: 34 - 43
FX: 28 - 34CSMT: 27 - 32
FX: GRADE 40PO: GRADE 40
YES (OUTSWING, INSWING, & PO ONLY)
Casement-Out
Project-Out
Locking Hardware
Operating Hardware
Reduced Motion & Operating Forces Hardware (AAMA 513)
Cam Handle Pole RingCam Handle
Pull Handle
4 Bar Armw/ Limit Stop
Keyed ReleaseLimit Arm
Concealed Hinge Keyed &
Non-keyedButt Hinge
Single Arm RotoOperator
Butt Hinge
Locking Hardware
Operating Hardware
Cam Handle Pole RingCam Handle
4 Bar Arm(Loose Rivet)
4 Bar Armw/ Limit Arm
4 Bar Arm Dual ShoeRoto Operator
Cam Handle Dual ShoeRoto Operator
4 Bar Arm(Loose Rivet)
Locking Hardware
Operating Hardware
Cam Handle Pole RingCam Handle
Locking Hardware
Operating Hardware
Cam Handle Pole RingCam Handle
4 Bar Arm
Casement-In
Project-In
325X & 450X WINDOW HARDWARE CHART
Butt Hinge Concealed Hinge Keyed & Non-keyed
Some hardware options and/or combinations may not be available due to size and weight limitations. Please contact your local sales rep for more information.
Applied SinglePoint Locking
Applied MultiPoint Locking
Roto Operator Friction Adjuster
Applied Multi PointLocking w/ Extended
Lock Handle
4 Bar Armw/ Limit Stop
Shim
Applied SinglePoint Locking
Access ControlLock
Friction Adjuster 4 Bar Armw/ Limit Stop
Access ControlLock
4 Bar Armw/ Limit Stop
4 Bar Armw/ Limit Stop
Shim
Access Control Lock
Pole Pull Ring
Access Control Lock
Lift Handle
Reduced Motion & Operating Forces Hardware (AAMA 513)
Reduced Motion & Operating Forces Hardware (AAMA 513)
Cam HandleApplied Multi Point
Locking w/ Extended Lock Handle
Butt Hinge