SERIE A03 SERIE SPC/SPR

Seismic detectors for indoor perimeter protections

Informative Brochure

■ 2 ■

■ 3 ■

TITOLOContents

Perimeter intrusion detection systems ................................................................................................................................. 5SERIE A03 ........................................................................................................................................................................ 6

The sensors .................................................................................................................................................................. 7The processing boards ................................................................................................................................................. 8The technology ............................................................................................................................................................ 9System configuration ................................................................................................................................................... 10

SERIE SPC/SPR ................................................................................................................................................................ 11The sensors ................................................................................................................................................................. 12Installation ................................................................................................................................................................... 14

Technical features .......................................................................................................................................................... 15SERIE A03 .................................................................................................................................................................... 16

A03B/MAS-C sensor ................................................................................................................................................. 16A03B/AS sensor ........................................................................................................................................................ 17A03AS sensor ........................................................................................................................................................... 18A03GR sensor ........................................................................................................................................................... 19A03 sensor ................................................................................................................................................................ 20SE04N board ............................................................................................................................................................ 21SE03N board ............................................................................................................................................................. 22SE02N board ............................................................................................................................................................. 23

SERIE SPC/SPR ............................................................................................................................................................. 24SPC01M sensor ......................................................................................................................................................... 24SPC01 sensor ............................................................................................................................................................ 25SPC02M sensor ........................................................................................................................................................ 26SPC02 sensor ............................................................................................................................................................ 27SPC03 sensor ............................................................................................................................................................ 28SPC03E sensor .......................................................................................................................................................... 29SPR01M sensor ......................................................................................................................................................... 30SPR01 sensor ............................................................................................................................................................ 31

■ 4 ■

■ 5 ■

TITOLO

SERIE A03 SERIE SPC/SPR

TORSUS SISMA CP 50 SISMA CA SISMA CA PFSERIR

PERIMETER INTRUSION DETECTION SYSTEMS

As far as the protection of flats, villas and buildings in general is concerned, indoor perimeter intrusion detection systems represent the latest – and often the only – defensive line. Since they are perimeter systems, they can detect any attempted break-in while the intruder is still outside the target building.

Like all the security devices, indoor detectors must be accurate and reliable, minimizing nuisance alarm rate and system maintenance. DEA Security's products can offer these guarantees thanks to their exclusive detection technology, the quality of their components and the use of technical solutions developed over years of research, development and tests in the field.

The indoor intrusion detectors produced by DEA Security are grouped into two families:

• SERIE A03, seismic detectors with relevant analysis electronic boards;• SERIE SPC/SPR, seismic detectors with built-in electronics.

DEA Security also produces a complete range of outdoor perimeter detection systems with high-level performance and reliability:

• SERIR, perimeter intrusion detection system for soft metal fences and semi-rigid panels; • TORSUS, perimeter intrusion detection system for rigid metal fences; • SISMA CP 50, buried intrusion detection system; • SISMA CA, intrusion detection system for floorings;• SISMA CA PF, intrusion detection system for raised floors;• DEA NET, centralization system; • DEA MAP, security management system.

■ 6 ■

SERIE A03

windows gratings glazed doors walls

SERIE A03 is an indoor intrusion detection system for the protection of doors, windows, glazed doors/windows, metal gratings, walls, ceilings and safes against shock, breakthrough and opening. The system is composed of a wide range of seismic sensors and the relevant processing boards.

SERIE A03 sensors do not contain any active electronic components and are connected to their own processing boards which can be calibrated and programmed according to the specific features of the structure to be protected.

■ 7 ■

SERIE A03

THE SENSORSSERIE A03 sensors perceive the vibrations generated by shock or breakthrough events against the structure to be protected.The sensors employ a piezoceramic transducer which produces electric signals if subjected to vibrations. To increase their sensitivity, some models have been provided with a piezodynamic technology which combines the piezoceramic transducer with an inertial mass to amplify the vibrations received by the sensors.

A03B/AS and A03B/MAS-C for windows and doors (piezodynamic)To be installed on window and door frames, one sensor can protect the whole structure, including the glass (if any), from shock and breakthrough events. These two models are also suitable for the protection of armoured structures and ceilings.A03B/MAS-C sensor has the same features as A03B/AS model, but it is also provided with magnetic contact for the protection of the structure against opening.

A03GR for metal gratings (piezoceramic)It protects metal gratings, railings and metal doors against shock and breakthrough. Designed for outdoor applications, the sensor is equipped with a metal housing and the relevant connection cable is protected by flexible metal sheath.

A03AS for walls (piezodynamic)

Suitable for the protection of walls and other structures – such as safes and reinforced cabinets - which require very high detection capability.

A03 for glazed surfaces (piezoceramic)

Suitable for the protection of glazed surfaces, such as shop windows, it detects the break of the glass and its drilling with diamond core bits. Very easy and quick to install, the sensor can be fixed to the glass by means of the double-sided tape supplied with it.

■ 8 ■

SERIE A03THE PROCESSING BOARDSThe electronic processing boards amplify and process the signals coming from the sensors. Depending on the model, they are provided with either analog or digital regulations to program their functions and their sensitivity levels. Each processing board manages up to 8 piezoceramic sensors or 15 piezodynamic sensors.

SE04/N (digital)This board can be connected to all SERIE A03 sensors and can discriminate the signals produced by three different types of attack against the structure: shock (repeated light shocks), breakthrough (single strong shock), drilling with diamond core bit or other electric device (continuous vibrations). Three trimmers allow you to regulate the detection capability for each type of signal, while the features of the board (event count, reset time, buzzer and thermal expansion filter) are programmed through two dip switches. SE04/N is provided with two balanced lines, one for tamper and the other for opening, and is able to manage the reed switch of A03B/MAS-C sensor.

SE03/N (digital)Same analysis capabilities and technical features as SE04/N model, but provided with one balanced line and without thermal expansion filter.

SE02/N (analog)Analog processing board provided with an NC tamper line and two trimmers to regulate the detection capability and the event count. A typical application is the protection of safes, CCTV cabinets, alarm control panels, external sirens and video camera cases.

■ 9 ■

SERIE A03

Light shocks Strong shocks Continuous vibrations

C/NC relayoutputs

control panel

processing board

sensor1

sensor2

sensorn

THE TECHNOLOGYThe processing boards interpret and analyse the signals perceived by the sensors, discriminating the environmental nuisances and the different intrusion techniques. For each type of alarm signal – light shocks, strong shocks and continuous vibrations – custom sensitivity levels and detection thresholds can be set.

The technology employed in each sensor together with the sophisticated analysis capabilities of the processing boards provide the system with a very high tolerance towards environmental nuisances.

The processing boards can be connected to any type of control panel by means of C/NC relay outputs.

■ 10 ■

A03GR

A03

A03BMASC

processingboard

processingboard

processingboard

processingboard

A03GR on gratings

A03B/AS or A03B/MAS-C on windows

A03 on glazed surfaces

A03AS on walls

control panel

C/NC relayoutput

C/NC relayoutput

C/NC relayoutput

C/NC relayoutput

SERIE A03

A03BMASC

THE SYSTEM CONFIGURATIONWhen planning a security system with SERIE A03 devices, perimeter zoning should take into account that different types of structure may determine a different response of the sensor to the vibrations generated by an intrusion attempt. For that reason the detectors belonging to the same alarm zone must protect structures of the same type, material and dimensions.

■ 11 ■

SERIE SPC/SPR

impact

inertialmass signal

shop windows skylights glazed doors and windows doors

SERIE SPC/SPR is a line of seismic sensors for the protection of windows, doors and glazed surfaces against shock, breakthrough and opening. Evolution of the proven SERIE A03 detectors and processing boards, SPC/SPR sensors do not need any separate electronics since they are provided with built-in analyser.

The sensors employ a piezoceramic transducer which produces electric signals if subjected to vibrations. To maximize their sensitivity, some models have been provided with a piezodynamic technology which combines the piezoceramic transducer with an inertial mass to amplify the vibrations received by the sensors.

SERIE SPC/SPR combines in a single device the DEA Security's advanced detection technology with the wide possibilities of configuration and calibration which are provided by separate processing boards in SERIE A03. This allows you to design Point ID systems where each sensor, which corresponds to a single alarm zone, can be calibrated independently from the others.

The detectors can be connected to any type of control panel by means of built-in C/NC relays.

■ 12 ■

SERIE SPC/SPR

THE SENSORS

SPC01 for doors and windows (piezodynamic, digital)

Designed without compromise, SPC01 sensor offers excellent performance and superior detection capability. The piezodynamic transducer, combined with a microcontroller, provides very high sensitivity, accurate detection and easy calibration. Thanks to its sophisticated detection algorithms, SPC01 discriminates the different types of attacks to the structure: shock, breakthrough and drilling with diamond core bit or other electrical tool.

The sensitivity levels can be calibrated via trimmer while the detector features – event count, reset time and thermal expansion filter – can be configured through a dip switch. SPC01 is provided with integrated alarm memory and detects magnetic tamper, opening of the housing and removal of the sensor.

SPC01M version includes a magnetic contact to signal the opening of the structure.

SPC02 for doors and windows (piezodynamic, analog)

SPC02 is provided with the same technology as SPC01 model, but the piezodynamic transducer is combined with an analog circuit which integrates the alarm memory feature. The sensor detects shock and breakthrough events against the structure as well as the opening of the sensor housing. The sensitivity and the event count can be adjusted using analog trimmers: the adjustment is eased by three LEDs which signal the alarm event, the alarm memory and the detected shocks.

SPC02M version includes a magnetic contact to signal the opening of the structure.

■ 13 ■

SERIE SPC/SPR

SPC03 for glazed surfaces (piezoceramic, analog)

Provided with piezoceramic transducer, alarm memory and anti-removal device, SPC03 is the most reliable seismic sensor for the glass break detection.Thanks to its digital sensitivity adjustment on four levels, this sensor can be installed on different types of glass, including multi-layer and reinforced glass.

Very easy and quick to install, the sensor is mounted to the glass by means of the double-sided tape supplied with it. The intentional or accidental detachment of the sensor from the glass is immediately detected as tamper alarm.

In SPC03 model the alarm is restored by switching the power supply off, whilst in SPC03E it is automatically restored.

SPR01 for doors and windows (piezodynamic, digital, self-powered)

SPR01 is a seismic sensor which brings DEA Security’s piezodynamic technology into wireless intrusion detection systems. Powered by two lithium batteries, which provide it with a long operation life, this sensor has been specifically designed for being combined with a radio transmitter: it is ideal for integration into wireless intrusion systems.

Sensitivity can be adjusted via trimmer and the event count can be programmed through a dip switch. Two status LEDs, one for alarm and the other for shock detection, may be deactivated to maximize the duration of the batteries.

SPR01M version includes a magnetic contact to signal the opening of the structure.

■ 14 ■

SERIE SPC/SPR

SPC03 on glazed surfaces

SPC01 or SPC02 on windows

SPC01 or SPC02 on doors

control panel

C/NC relayoutput

C/NC relayoutput

C/NC relayoutput

control panel

radio transmitterSPR01

radio receiver

INSTALLATIONSERIE SPC01 and SPC02 sensors are installed on door or window frames. Thanks to their high sensitivity, they can protect the entire structure, including the glazed surfaces.

SPC03 has been specifically designed for glass break detection. The sensor is fixed to the glazed surface, working properly with any inclination and orientation.

SPR01 has almost the same features as SPC01 model but can be combined with a radio transmitter (not included). Like SPC01 and SPC02, SPR01 is fixed to the frame of the structure.

■ 15 ■

TECHNICAL FEATURES

■ 16 ■

SERIE A03

A03B/MAS-C Sensor

A03B/MAS-C detector must be coupled with SE04N processing board.

Piezodynamic sensor for the protection of doors and windows against shock, breakthrough and opening.

Complies with:• Directive 2004/108/CE • CEI 79/2 – 2nd edition – 1st level

Technical features:• Sensor dimensions: 51 x 31 x 22 mm (L x W x H)• Magnetic contact dimensions: 50 x 13 x 16 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• IP rate: IP3X• Connections: 6 conductors + shield• Tamper-proof device• Sensitivity adjustment• Equipped with magnetic contact• Colour: white / brown

Installation specifications:• Distance from the magnetic contact to the sensor: 10 mm• Average coverage area: 4 m2

A03B/MAS-C sensors are available in the following versions:

Part number Description ColourA03BMASC Seismic sensor for doors and windows WHITE

MA03BMASC Seismic sensor for doors and windows BROWN

■ 17 ■

SERIE A03

A03B/AS SensorPiezodynamic sensor for the protection of doors and windows against shock and breakthrough.

Complies with:• Directive 2004/108/CE • CEI 79/2 – 2nd edition – 1st level

Technical features:• Dimensions: 52 x 31 x 22 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• IP rate: IP3X• Connections: 4 conductors + shield• Tamper-proof device• Sensitivity adjustment• Colour: white / brown

Installation specifications:• Average coverage area: 4 m2

A03B/AS sensors are available in the following versions:

Part number Description ColourA03BAS Seismic sensor for doors and windows WHITE

MA03BAS Seismic sensor for doors and windows BROWN

■ 18 ■

SERIE A03

A03AS SensorPiezodynamic sensor for the protection of masonry walls against breakthrough.

Complies with:• Directive 2004/108/CE • CEI 79/2 – 2nd edition – 1st level

Technical features:• Dimensions: 67 x 41 x 27 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• IP rate: IP3X• Connections: 4 conductors + shield• Sensor anti-opening device• Sensitivity adjustment• Internal terminal connections• Colour: White

Installation specifications:• Average coverage area: 1,5 m radius corresponding to approx. 10 m2

Part number Description ColourA03AS Seismic sensor for walls WHITE

■ 19 ■

SERIE A03

A03GR SensorPiezoceramic sensor for the protection of gratings and metal doors against shock and breakthrough. It is provided with connection cable protected by flexible metal sheath. Suitable for external applications.

Complies with:• Directive 2004/108/CE • CEI 79/2 – 2nd edition – 1st level

Sensor technical features:• Dimensions: 100 x 33 x 14 mm (L x W x H)• Operating temperature: -25° ÷ +80 °C• Relative humidity: <95% non condensing• Sensor IP rate: IP55• Metal housing IP rate: IP34• Connections: 4 conductors + shield• Colour: Steel grey

Metal sheath technical features:• Diameter: 10 mm• Material: Galvanized steel with single seam and PVC vacuum covered• Colour: Steel grey

Installation specifications:• Average coverage area: 4 m2

Part number Description ColourA03GR Seismic sensor for gratings STEEL GREY

■ 20 ■

SERIE A03

A03 SensorPiezodynamic sensor for the protection of glazed surfaces against shock and breakthrough.

Complies with:• Directive 2004/108/CE • CEI 79/2 – 2nd edition – 1st level

Technical features:• Dimensions: 48 x 27 x 9 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• IP rate: IP55• Connections: 4 conductors + shield• Colour: white / brown

Installation specifications:• Average coverage area: 4 m2 on tempered glass (single-layer) up to 11 mm thick

3 m2 on safety/shatterproof glass (double-layer) up to 11 mm thick 2 m2 on shatterproof/bulletproof glass (triple-layer) up to 26 mm thick

A03 sensors are available in the following versions:

Part number Description ColourA03 Seismic sensor for glazed surfaces WHITE

MA03 Seismic sensor for glazed surfaces BROWN

■ 21 ■

SERIE A03

SE04N BoardHigh-performance digital processing board which can be used with any SERIE A03 sensor. It is the only one to manage the magnetic contact of A03B/MAS-C sensor.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 12 Vdc (min 11,0 - max 15,0 V)• Current: 20 mA (standby) – 55 mA (max)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Board dimensions: 104 x 82 mm (B x H)• Mounting plate dimensions: 104 x 96 mm (B x H)• Inputs:

- piezo signal line - balanced tamper lines - external reset - sporadic event-count activation control

• Outputs: - shock/breakthrough ALARM - opening ALARM - tamper ALARM

• Calibrations/Settings: - continuous vibration sensitivity adjustment - light shock sensitivity adjustment - single event sensitivity adjustment (breakthrough) - continuous vibration activation - thermal expansion filter activation - buzzer activation - event-count programming - wait-time programming

• Analysis capability: - no 8 piezoceramic sensors of the same model - no 15 piezodynamic sensors of the same model

Part number DescriptionSE04N Digital processing board

■ 22 ■

SERIE A03

SE03N BoardDigital processing board compatible with A03, A03GR, A03AS and A03B/AS.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 12 Vdc (min 11,0 - max 15,0 V)• Current: 20 mA (standby) – 42 mA (max)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Board dimensions: 104 x 82 mm (B x H)• Mounting plate dimensions: 104 x 96 mm (B x H)• Inputs:

- piezo signal line - tamper balanced lines - external reset

• Outputs: - shock/breakthrough ALARM - tamper ALARM

• Calibrations/Settings: - continuous vibration sensitivity adjustment - light shock sensitivity adjustment - single event sensitivity adjustment (breakthrough) - continuous vibration activation - buzzer activation - event-count programming - wait-time programming

• Analysis capability: - no 8 piezoceramic sensors of the same model - no 15 piezodynamic sensors of the same model

Part number DescriptionSE03N Digital processing board

■ 23 ■

SERIE A03

SE02N BoardAnalog processing board.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 12 Vdc (min 11,0 - max 15,0 V)• Curent: 20 mA (standby) – 30 mA (max)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Board dimensions: 63 x 60 mm (B x H)• Mounting plate dimensions: 90 x 60 mm (B x H)• Inputs:

- piezo signal line - tamper line (unbalanced) - external reset

• Outputs: - shock ALARM - tamper ALARM

• Calibrations/settings: - Sensitivity adjustment - event-count calibration

• Managing capability: - no 8 piezoceramic sensors of the same model - no 15 piezodynamic sensors of the same model

Part number DescriptionSE02N Analog processing board

■ 24 ■

SERIE SPC/SPR

SPC01M Sensor

SPC01M sensors are available in the following versions:

Piezodynamic sensor with integrated electronics for the protection of doors and windows against shock, breakthrough and opening.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 12 Vdc (min 11,0 - max 15,0 V)• Current: 20 mA (standby) – 26 mA (max)• Sensor dimensions: 36 x 103 x 23 mm (L x W x H)• Magnetic contact dimensions: 13 x 50 x 11 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Connection: terminal board for 10 conductors• Inputs:

- RESET - ARM

• Outputs: - shock/breakthrough ALARM - opening ALARM - tamper ALARM

• Sensor anti-opening device• Anti-removal device• Tamper-proof magnetic device• Magnetic contact• Light shock sensitivity adjustment• Strong shock sensitivity adjustment (breakthrough)• Event-count programming• Thermal expansion filter• Continuous vibration detection• Alarm memory• Colour: white / brown

Installation specifications:• Distance from the magnetic contact to the sensor: 10 mm• Average coverage area: 4 m2

Part number Description Colour

SPC01M Seismic sensor with integrated electronics for the protection of doors and windows. Provided with magnetic contact WHITE

MSPC01M Seismic sensor with integrated electronics for the protection of doors and windows. Provided with magnetic contact BROWN

■ 25 ■

SERIE SPC/SPR

SPC01 SensorPiezodynamic sensor with integrated electronics for the protection of doors and windows against shock and breakthrough.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 12 Vdc (min 11,0 - max 15,0 V)• Current: 20 mA (standby) – 26 mA (max)• Sensor dimensions: 36 x 103 x 23 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Connection: terminal board for 8 conductors• Inputs:

- RESET - ARM

• Outputs: - Shock/breakthrough ALARM - Tamper ALARM

• Sensor anti-opening device• Anti-removal device• Tamper-proof magnetic device• Light shock sensitivity adjustment• Strong shock sensitivity adjustment (breakthrough)• Event-count programming• Thermal expansion filter• Continuous vibration detection• Alarm memory• Colour: White / Brown

Installation specifications:• Average coverage area: 4 m2

Part number Description ColourSPC01 Seismic sensor with integrated electronics for doors and windows WHITE

MSPC01 Seismic sensor with integrated electronics for doors and windows BROWN

SPC01 sensors are available in the following versions:

■ 26 ■

SERIE SPC/SPR

SPC02M Sensor

SPC02M sensors are available in the following versions:

Piezodynamic sensor with integrated electronics for the protection of doors and windows against shock, breakthrough and opening.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 12 Vdc (min 11,0 - max 15,0 V)• Current: 16 mA (standby) – 26 mA (max)• Sensor dimensions: 36 x 103 x 23 mm (L x W x H)• Magnet dimensions: 13 x 50 x 11 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Connection: terminal board for 10 conductors• Inputs:

- RESET - ARM

• Outputs: - Shock/breakthrough ALARM - Opening ALARM - Tamper ALARM

• Sensor anti-opening device• Magnetic contact• Sensitivity adjustment• Event-count programming• Alarm memory• Colour: White / Brown

Installation specifications:• Distance from the magnetic contact to the sensor: 10 mm• Average coverage area: 4 m2

Part number Description Colour

SPC02M Seismic sensor with integrated electronics for doors and windows. Provided with magnetic contact WHITE

MSPC02M Seismic sensor with integrated electronics for doors and windows. Provided with magnetic contact BROWN

■ 27 ■

SERIE SPC/SPR

SPC02 SensorPiezodynamic sensor with integrated electronics for the protection of doors and windows against shock and breakthrough.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 12 Vdc (min 11,0 - max 15,0 V)• Current: 16 mA (standby) – 26 mA (max)• Sensor dimensions: 36 x 103 x 23 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Connection: terminal board for 8 conductors• Inputs:

- RESET - ARM

• Outputs: - Shock/breakthrough ALARM - Tamper ALARM

• Sensor antiopening device• Sensitivity adjustment• Event-count adjustment• Alarm memory• Colour: White / Brown

Installation specifications:• Average coverage area: 4 m2

Part number Description ColourSPC02 Seismic sensor with integrated electronics for doors and windows WHITE

MSPC02 Seismic sensor with integrated electronics for doors and windows BROWN

SPC02 sensors are available in the following versions:

■ 28 ■

SERIE SPC/SPR

SPC03 SensorPiezoceramic sensor with integrated electronics for glass break protection. The alarm is restored by switching the power supply off.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 12 Vdc (min 11,0 - max 15,0 V)• Current: 15 mA• Sensor dimensions: 41 x 41 x 16 mm (L x W x H)• Base dimensions: 43 x 45 x 15 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Connection: 6-conductor cable: 2 for power supply, 2 for alarm signal line, 2 for tamper line• Sensitivity adjustment• Outputs:

- Shock/breakthrough ALARM - Tamper ALARM (for removal)

• Colour: White

Installation specifications:• Average coverage area: 3 m2 on double-layer glass up to 11 mm thick

2 m2 on reinforced glass up to 26 mm thick

Part number Description ColourSPC03 Seismic sensor with integrated electronics for glass break protection WHITE

■ 29 ■

SERIE SPC/SPR

SPC03E SensorPiezoceramic sensor with integrated electronics for glass break protection.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 12 Vdc (min 11,0 - max 15,0 V)• Current: 15 mA• Sensor dimensions: 41 x 41 x 16 mm (L x W x H)• Base dimensions: 43 x 45 x 15 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Connection: 6-conductor cable: 2 for power supply, 2 for alarm signal line, 2 for tamper line• Sensitivity adjustment• Outputs:

- Shock/breakthrough ALARM - Tamper ALARM (for removal)

• Colour: White

Installation specifications:• Average coverage area: 3 m2 on double-layer glass up to 11 mm thick

2 m2 on reinforced glass up to 26 mm thick

Part number Description ColourSPC03E Seismic sensor with integrated electronics for glass break protection WHITE

■ 30 ■

SERIE SPC/SPR

SPR01M SensorSelf-powered piezodynamic sensor with integrated electronics, for wireless systems. It protects doors and windows against shock, breakthrough and opening.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 6 Vdc (2 x 3V lithium batteries type CR2032, provided with the sensor)• Current: 8 - 10 µA (standby)• Sensor dimensions: 36 x 103 x 23 mm (L x W x H)• Magnet dimensions: 13 x 50 x 11 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Connection: terminal board for 8 conductors• Sensor anti-opening device• Magnetic contact• Sensitivity adjustment (shock)• Event-count programming• Outputs:

- Shock/breakthrough ALARM - Opening ALARM - Tamper ALARM

• Alarm memory• Colour: White / Brown

Installation specifications:• Distance from the magnetic contact to the sensor: 10 mm• Average coverage area: 4 m2

Part number Description Colour

SPR01M Self-powered seismic sensor for doors and windows. Provided with magnetic contact. WHITE

MSPR01M Self-powered seismic sensor for doors and windows. Provided with magnetic contact BROWN

The detector does not include a radio transmitter.

SPR01M sensors are available in the following versions:

■ 31 ■

SERIE SPC/SPR

SPR01 SensorSelf-powered piezodynamic sensor with integrated electronics, for wireless systems. It protects doors and windows against shock and breakthrough.

Complies with:• Directive 2004/108/CE • EN 50130-4:2011• EN 61000-6-3:2007 + A1:2011• CEI 79/2 – 2nd edition – 1st level

Technical features:• Power supply: 6 Vdc (2 x 3V lithium batteries type CR2032, provided with

the sensor)• Current: 8 - 10 µA (standby)• Sensor dimensions: 36 x 103 x 23 mm (L x W x H)• Operating temperature: 0 ÷ +70 °C• Relative humidity: <95% non condensing• Connection: terminal board for 6 conductors• Sensor anti-opening device• Sensitivity adjustment (shock)• Event-count programming• Outputs:

- Shock/breakthrough ALARM - Tamper ALARM

• Alarm memory• Colour: White / Brown

Installation specifications:• Average coverage area: 4 m2

Part number Description ColourSPR01 Self-powered seismic sensor for doors and windows WHITE

MSPR01 Self-powered seismic sensor for doors and windows BROWN

The detector does not include the radio transmitter.

SPR01 sensors are available in the following versions:

© 2016 DEA Security S.r.l.v. 1.0.1

DEA Security reserve the right to vary at any moment and without notice the information and the specifications herein.

DEA Security S.r.l.Via Bolano, snc - 19037 Santo Stefano di Magra (SP)

tel. +39 0187 699233 - fax +39 0187 697615 VAT NO: IT00291080455

Web: www.deasecurity.com - eMail: dea@deasecurity.com