Wireless Serial Overview

Serial Interface on 195E products

• Configure Ethernet links first• Troubleshooting and diagnostic of WLAN network

Serial Data Transferred Over Ethernet System

Serial Links are Transparent

• Point to Point• Multicast

Two Modes of Operation

Serial Over Broadband

195E Serial Interface Layout

12 VDC Input (Auxiliary Connector )

Reset SwitchRS-232

ConfigurationRJ-45 10/100BaseT

Ethernet Port

Transmit LED

Receive LED

Status LED

Power over Ethernet LED

Aux Power LED

RS-232 Data Port

Second Ethernet

Port

210 Serial Interface Layout

12 VDC Input

Reset Switch

USB Configuration

RJ-45 10/100/1GB Ethernet Port

Transmit LED

Receive LED

Status LED

RS-232 Data Port

Power LED

RSSI LED Meter

Single Page Configuration on Setup

• Data Rate, Parity, Start/Stop Bits

• Transmission Characters

• Data Format

Multipoint System

• All remote sites will receive the data

• Set to multicast address

• Default Route must be set to the IP address of Root Bridge

Separate Networks with Port Number

Serial Port Configuration

Hybrid of Both Serial and Ethernet Interface

Both Serial and Ethernet Network Can Work Simultaneously

• Legacy systems

• Adding in new locations to existing site

• Providing video link on serial network

Serial Network has Little Impact on Bandwidth

Serial and Ethernet Networks