SERGE FERRARI Flexlight Advanced 902 S2

SERGE FERRARI Flexlight Perform 702 S2

SERGE FERRARI Flexlight Perform 502 S2

Technical Specifications SERGE FERRARI Flexlight Perform 502 S2 and 702 S2

accessories

Kedar 709 and 719: high performance bolt-ropes, coated on 1 or 2 sides for perfect finish

ATS (Air Tension System): Unique tension system for perfectly taut fabrics We recommend using Serge Ferrari Cleaner, specially designed to clean and

maintain FLEXLIGHT membranes

502 s2 702 s2 standards

weight 590 g/m2 750 g/m2 EN ISO

2286-2

width 250 / 267 cm 250 / 267 cm

standard format length

50 lm - 350 lm 50 lm - 300 lm

tensile strength

280/280 daN/5 cm 280/280 daN/5 cm EN ISO

1421

tear strength

28/28 daN/5 cm 30/28 daN/5 cm DIN

53.363

finish Formula S2 fluorinated varnish weldable Formula S2 fluorinated varnish weldable

flame retardancy

B-s2, d0/EN 13501-1 M2/NFP 92-507

Method 1/NFPA 701 CSFM T19

CLASS A/ASTM E84 B1/DIN 4102-1 BS

7837 1530.2 et 3/AS/NZS Classe 2/UNI

9177-07 M2/UNE 23.727-90 VKF 5.3/SN

198898 Group 1/AS/NZS 3837

CAN/ULC-S109 Schwerbrennbar Q1

Tr1/ONORM A 3800-1 G1/GOST

30244.94

B-s2, d0/EN 13501-1 M2/NFP 92-507

Method 2/NFPA 701 CSFM T19 B1/DIN

4102-1 BS 7837 1530.2 et 3/AS/NZS SIS

650082 /ETA Schwerbrennbar Q1-

Tr1/ONORM A 3800-1 M2/UNE 23.727-

90 VKF 5.3/SN 198898 Classe 2/UNI

9177 CAN ULCS 109 CAN/ULC-S 102

G1/GOST 30244.94 Class E/EN 11925-2

(SITAC)

Warranty 5 years 7 years

Technical Specifications SERGE FERRARI Flexlight Advanced 902 S2

accessories

We recommend using Serge Ferrari detergent to clean FLEXLIGHT membranes

services

Verification of consistent colour per translucency (VISU service) Special production and colours Short production runs 50 lm rolls available upon request

value standards

surface treatment / yarn Anticapilarity low wick yarns PES HT 1100

Dtex

weight 950 g/m² EN ISO 2286-2

width 267 cm

standard format length 220 ml

tensile strength (warp/weft)

420/400 daN/5cm EN ISO 1421 ASTM D 751-00 Cut

Strip

tear strength (warp/weft) 55/50 daN DIN 53.363 ASTM D 751-00

Trapezoid

flame retardancy B-s2,d0/EN 13501-1

warranty 15 years

AGTEX 951 P1

AGTEX 851 OP1- BLOCKOUT

AGTEX 751 P1

AGTEX 751 P1 – 750 GSM

Coating Material : PVC (Polyvinyl Chloride)

Base Fabric : High Tenacity Polyester

Yarn Size : 1,100 DTex

Total Weight : 750 gr/m2

Width : 250 cm, 300 cm

Thickness : 0.65 mm

Tensile Strength (warp/weft) : 300/300 daN/5cm

Tear Strength (warp/weft) : 30/30 daN

Working Temperature : -30 ∼ +70 oC

Flame Retardancy : Yes (B1, B-s1, d0)

Adhesion (warp/weft) : 10/10 daN/5cm

Lacquering (top/bottom) : PVDF/Acrylic

Standard EN ISO 2076 : Yarn Size

Standard EN ISO 2286-2 : Total Weight & Thickness

Standard EN ISO 1421 : Tensile Strength

Standard EN ISO 2411 : Adhesion

Standard DIN 53363 : Tear Strength

Standard DIN 4101-1 : Flame Retardancy (B1)

Standard DIN 13501-1 : Flame Retardancy (B-s1, d0)

AGTEX 951 P1 – 950 GSM

Coating Material : PVC (Polyvinyl Chloride)

Base Fabric : High Tenacity Polyester

Yarn Size : 1,100 DTex

Total Weight : 950 gr/m2

Width : 250 cm, 300 cm

Thickness : 0.75 mm

Tensile Strength (warp/weft) : 400/400 daN/5cm

Tear Strength (warp/weft) : 50/50 daN

Working Temperature : -30 ∼ +70 oC

Flame Retardancy : Yes (B1, B-s1, d0)

Adhesion (warp/weft) : 12/12 daN/5cm

Lacquering (top/bottom) : PVDF/Acrylic

Standard EN ISO 2076 : Yarn Size

Standard EN ISO 2286-2 : Total Weight & Thickness

Standard EN ISO 1421 : Tensile Strength

Standard EN ISO 2411 : Adhesion

Standard DIN 53363 : Tear Strength

Standard DIN 4101-1 : Flame Retardancy (B1)

Standard DIN 13501-1 : Flame Retardancy (B-s1, d0)

AGTEX 851 OP1 – 850 GSM

Coating Material : PVC (Polyvinyl Chloride)

Base Fabric : High Tenacity Polyester

Yarn Size : 1,100 DTex

Total Weight : 850 gr/m2

Width : 250 cm, 300 cm

Thickness : 0.7 mm

Tensile Strength (warp/weft) : 300/300 daN/5cm

Tear Strength (warp/weft) : 30/30 daN

Working Temperature : -30 ∼ +70 oC

Flame Retardancy : Yes (B1, B-s1, d0)

Adhesion (warp/weft) : 10/10 daN/5cm

Lacquering (top/bottom) : PVDF/Acrylic

Standard EN ISO 2076 : Yarn Size

Standard EN ISO 2286-2 : Total Weight & Thickness

Standard EN ISO 1421 : Tensile Strength

Standard EN ISO 2411 : Adhesion

Standard DIN 53363 : Tear Strength

Standard DIN 4101-1 : Flame Retardancy (B1)

Standard DIN 13501-1 : Flame Retardancy (B-s1, d0)

HEYTEX – TECHNICAL PROPERTIES

Category H5572-0289 700 gsm H5573-0289 900 gsm H5571-0828 850 gsm (blockout)

Certificate

Basic Fabric trade mark polyester trade mark polyester trade mark polyester DIN ISO 2076

Yarn 1100/1100 dtex (low wick treatment) 1100/1100 dtex (low wick treatment) 1100/1100 dtex (low wick treatment) DIN EN ISO 2060

Weave L 1/1 P 2/2 L 1/1 DIN ISO 9354

Threads (w/f) 9/9 pro cm (22.9/22.9 per inch) 12/12 pro cm (30.4/30.4 per inch) - DIN EN 1049-2

Coating Material (Top Coat)

PVC/PVDF (PVDF Mix Weldable) PVC/PVDF (PVDF Mix Weldable) PVC (Acrylic)

Total Weight ca. 700 g/m2 (approx. 20.6 oz/yd

2) ca. 900 g/m

2 (approx. 26.5 oz/yd

2) ca. 850 g/m

2 (approx. 25 oz/yd

2) DIN EN ISO 2286-2

Tensile Strength 3400/3100 N/5 cm 4600/4200 N/5 cm 3000/2900 N/5 cm DIN EN ISO 1421

Tear Resistance (w/f)(lbs) 380/340 N 630/550 N 330/290 N DIN 53363

Welding Adhesion min. 150 N/5 cm min. 130 N/5 cm min. 130 N/5 cm IVK 3.13

Flex-Resistance

min. 100.000 Knickungen (at least 100.000 bends)

min. 100.000 Knickungen (at least 100.000 bends)

min. 100.000 Knickungen (at least 100.000 bends)

DIN 53359 A

Cold Resistance - 30oC (-22

oF) - 30

oC (-22

oF) - 30

oC (-22

oF) DIN EN 1876-1

Flame Retardancy flame retardant flame retardant flame retardant DIN 4102 B1

DICKSON - LAC 950 SLF

DICKSON - LAC 720 SLF

DICKSON - LAC 650 SL

LAC 650 SL Technical sheet

USES

Recommended use Pergolas, Terrace awnings, Sail shade, Marquees, Glamping, Flexible doors

CHARACTERISTICS

VALUES UNITS

STANDARDS

WARP WEFT

GEN NERAL CHARACTERISTICS

Base cloth

1100 dTex PES HT

990 den

Coating PVC Lowick coating both side

Finish Cleangard lacquer both sides

Weight 680 g/m² ISO 3801

Width 250 250 250 300 300 300

cm

Roll length

30 60 250 30 60 250 ml

FABRIC RESISTANCE

Tensile strength 260 250 daN/5cm NF EN ISO 1421

Tear strength 32 28 daN DIN 53.363

Adhesion 8 daN/5cm NF EN ISO 2411

Elongation under load <1 <2 % NF EN 15619

Residual deformation <0.4 <0.8 % NF EN 15619

Cold resistance -30 °C NF EN 1876-2

Warm resistance 70 °C (24h)

Fire resistance

M2

NF P 92 503

B1 DIN 4102

BS

BS 7837

B-S2-D0

Euroclasses EN

13501-1

NFPA 701

NFPA 701

CSFM Title19 CSFM Title 19

Values may vary in a tolerance of +/-10%.

Specification maybe modified and are subject to

manufacturer's requisites. Product compatibility to

the application is reserved to the users☂ appraisal.

The buyer of our products is responsible for checking the validity of the above data.

LAC 720 SLF Technical sheet

USES

Recommended use Textile architecture

CHARACTERISTICS

VALUES UNITS

STANDARDS

WARP WEFT

GENERAL CHARACTERISTICS

Values may vary in a tolerance of +/-10%.

Specification maybe modified and are subject to

manufacturer's requisites. Product compatibility to

the application is reserved to the users☂ appraisal.

The buyer of our products is responsible for checking the validity of the above data.

Base cloth

1100 dTex PES HT

990 den

Coating PVC Lowick coating both side

Finish PVDF lacquer both sides

Weight 720 g/m² ISO 3801

Width 300 300 cm

Roll length 60 200 ml

FABRIC RESISTANCE

Tensile strength 260 250 daN/5cm NF EN ISO 1421

Tear strength 32 28 daN DIN 53.363

Adhesion 10 daN/5cm NF EN ISO 2411

Elongation under load <1 <2 % NF EN 15619

Residual deformation <0.4 <0.8 % NF EN 15619

Cold resistance -40 °C NF EN 1876-1

Warm resistance 70 °C (24h)

Fire resistance

M2

NF P 92 503

B1 DIN 4102

BS

BS 7837

B-S2-D0

Euroclasses EN

13501-1

NFPA 701 NFPA 701

LAC 950 SLF Technical sheet

USES

Recommended use Textile architecture

CHARACTERISTICS

VALUES UNITS

STANDARDS

WARP WEFT

GENERAL CHARACTERISTICS

Values may vary in a tolerance of +/-10%.

Specification maybe modified and are subject to

manufacturer's requisites. Product compatibility to

the application is reserved to the users☂ appraisal.

The buyer of our products is responsible for checking the validity of the above data.

Base cloth

1100 dTex PES HT

990 den

Coating PVC Lowick coating both side

Finish PVDF lacquer both sides

Weight 950 g/m² ISO 3801

Width 300 300 cm

Roll length 60 200 ml

FABRIC RESISTANCE

Tensile strength 400 400 daN/5cm NF EN ISO 1421

Tear strength 55 50 daN DIN 53.363

Adhesion 12 daN/5cm NF EN ISO 2411

Elongation under load <1 <2 % NF EN 15619

Residual deformation <0.4 <0.8 % NF EN 15619

Cold resistance -40 °C NF EN 1876-1

Warm resistance 70 °C (24h)

Fire resistance

M2

NF P 92 503

B1 DIN 4102

BS

BS 7837

B-S2-D0

Euroclasses EN

13501-1

NFPA 701 NFPA 701