SEQ. #770-819 EXCAVATORS August, 2019 E-95 Excavators … · 2020-02-26 · SEQ. #770-819 E-95 Excavators EXCAVATORS DISCOUNT OFF LIST PRICING INFO SPECIFICATION 5.0 August, 2019

SEQ. #770-819 E-95 Excavators

EXCAVATORSDISCOUNT OFF LIST

PRICING INFOSPECIFICATION 5.0

August, 2019

Vendor Name: Titan Machinery IncContact Person: Andy BethelStreet Address: 644 East Beaton DriveP.O. Box:City, State, Zip West Fargo, ND Phone #: 952-445-5400Toll Free #: 800-795-9274Email Address: [email protected]

Spec Number Information Requested Answer

5.1 MANUFACTURER Case

5.2 DATE AND ID. OF PRICE LIST Compact Exc C-Series6/28/2019

5.3 PERCENTAGE DISCOUNT FROM PRICE LISTFactory Supplied Attachments may incur installation charges.

CX17C - CX26C 26.00%CX30C - CX33C - CX37C 27.00%

CX57C - CX60C 28.50%

5.4 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A

5.5 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.

CX17C Hourly Rental Rate: N/AWeekly Rental Rate: 715.00$ Monthly Rental Rate: 1,760.00$

Percent (%) of Rental Fee applied to purchase price: 80% first 90 days





CX33C - CX37C Hourly Rental Rate: N/AWeekly Rental Rate: 926.00$ Monthly Rental Rate: 2,350.00$


CX57C - CX60C Hourly Rental Rate: N/AWeekly Rental Rate: 1,038.00$ Monthly Rental Rate: 2,600.00$


N/A

5.6 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS

DELIVERY STARTING POINT - City, State, Zip code Nearest Titan Machinery Inc. Below

If the new rental equipment is purchased and finance charges are applicable for theactual rental term only, state the actual interest rate here:

mailto:[email protected]




August, 2019

Shakopee, MN 55379Fargo, ND 54108Crookston, MN 56716Hermantown, MN 55811Rogers, MN 55374Marshall, MN 56258Sioux Falls, SD 57104La Crosse, WI 54601

PRICE PER LOADED MILE 4.00$ MINIMUM DELIVERY CHARGE (if applicable) 250.00$

5.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options. Add as many extra lines as you need. (Specify years, miles or hours extended term covers.)

36 months 3,000 hrsPremier 715.00$

Power Train & Hydraulics 576.00$ Power Train Only 352.00$

48 months 4,000 hrsPremier 928.00$

Power Train & Hydraulics 773.00$ Power Train Only 433.00$

60 months 5,000 hrsPremier 2,015.00$

Power Train & Hydraulics 1,580.00$ Power Train Only 966.00$

5.8 HOURLY SHOP RATE(Installation services may be requested on an "as needed" basis) 132.50$

5.9 PRICE FOR ADDITIONAL MANUALS (1 of each included at no cost, per specs)ADDITIONAL SERVICE MANUAL

Digital INCPaper 1,000.00$

ADDITIONAL PARTS MANUAL Digital INCPaper 500.00$

PRICE FOR ADDITIONAL OPERATIONS MANUAL Digital INCPaper 150.00$

5.10 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES Attachments might incur installation charges

Case Attachments - Excludes Hammers 15%Case Attachments - Hammers only 25%

Kent Hammers size FX125 and Smaller 25%Kent Hammers size FX175 and Larger 20%

Kent Compactor Pricing 5%

FAE Pricing 10%

Werk-Brau 15%

Woods 10%




August, 2019

Vendor Name: Titan Machinery IncContact Person: Andy BethelStreet Address: 644 East Beaton DriveP.O. Box:City, State, Zip West Fargo, ND Phone #: 952-445-5400Toll Free #: 800-795-9274Email Address: [email protected]

Spec Number Information Requested Answer

5.1 MANUFACTURER Case

5.2 DATE AND ID. OF PRICE LIST Exc CX75-CX80 andD-Series

10/11/2019

5.3 PERCENTAGE DISCOUNT FROM PRICE LISTFactory Supplied Attachments may incur installation charges.

CX75C - CX80C 32.00%CX130D - CX350D LR 33.00%

5.4 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.DEDUCT cost per Used Hour from the original Contract Price N/A

5.5 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.

CX75C - CX80C Hourly Rental Rate: N/AWeekly Rental Rate: 1,450.00$ Monthly Rental Rate: 3,515.00$


CX130D Hourly Rental Rate: N/AWeekly Rental Rate: 1,685.00$ Monthly Rental Rate: 4,475.00$








CX210D LR Hourly Rental Rate: N/AWeekly Rental Rate: 3,519.00$ Monthly Rental Rate: 9,500.00$







August, 2019




CX250D LR Hourly Rental Rate: N/AWeekly Rental Rate: 4,260.00$ Monthly Rental Rate: 11,500.00$


CX290D - CX300D Hourly Rental Rate: N/AWeekly Rental Rate: 3,534.00$ Monthly Rental Rate: 9,500.00$




N/A

5.6 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS

DELIVERY STARTING POINT - City, State, Zip code Nearest Titan Machinery Inc. BelowShakopee, MN 55379Fargo, ND 54108Crookston, MN 56716Hermantown, MN 55811Rogers, MN 55374Marshall, MN 56258Sioux Falls, SD 57104La Crosse, WI 54601

PRICE PER LOADED MILE 4.00$ MINIMUM DELIVERY CHARGE (if applicable) 250.00$

5.7 EXTENDED WARRANTY OPTIONSUse this section to offer performance/warranty options. Add as many extra lines as you need. (Specify years, miles or hours extended term covers.)

CX75C - CX80C24 months 2,000 hrs

Premier 554.00$ Power Train & Hydraulics 337.00$

Power Train Only 224.00$ 36 months 3,000 hrs

Premier 1,073.00$ Power Train & Hydraulics 898.00$

Power Train Only 599.00$ 48 month 4,000 hrs

Premier 1,937.00$ Power Train & Hydraulics 1,471.00$



Power Train Only 1,873.00$

If the new rental equipment is purchased and finance charges are applicable for theactual rental term only, state the actual interest rate here:




August, 2019

CX130D - CX145D48 months 3,000 hrs

Premier 825.00$ Power Train & Hydraulics 535.00$







Power Train Only 874.00$

CX160D - CX210D - CX245D - CX250D48 months 3,000 hrs






Power Train Only 1,025.00$ 60 months 5,000 hrs



CX290D - CX300D - CX350D48 months 3,000 hrs












August, 2019

5.8 HOURLY SHOP RATE(Installation services may be requested on an "as needed" basis) 132.50$

5.9 PRICE FOR ADDITIONAL MANUALS (1 of each included at no cost, per specs)ADDITIONAL SERVICE MANUAL

Digital INCPaper 1,500.00$

ADDITIONAL PARTS MANUAL Digital INCPaper 500.00$

PRICE FOR ADDITIONAL OPERATIONS MANUAL Digital INCPaper 150.00$

5.10 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES Attachments might incur installation charges

Case Attachments - Excludes Hammers 15%Case Attachments - Hammers only 25%

Kent Hammers size FX125 and Smaller 25%Kent Hammers size FX175 and Larger 20%

Kent Compactor Pricing 5%

FAE Pricing 10%

Werk-Brau 15%

Woods 10%

SWIFT EVENT TITLE & NUMBER: EXCAVATORS AND RELATED PARTS AND ATTACHMENTS E-95(5) G0210-000009806

** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation.

** SWIFT Vendor Numbers: Provide the Swift Vendor Number (SWIFT ID) and Location Code (LOC CODE) for each Authorized Distributor. Each Authorized Distributor must have an accurate SWIFT ID.

** INSURANCE: All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditinos before any State Contract may be executed.

COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMETitan Machinery Inc. 251892 18 6340 County Road 101 E, Shakopee MN, 55379 952-445-5400 Ben PiasTitan Machinery Inc. 251892 6 4001 38th Street SW, Fargo ND, 54108 701-237-3333 Lee MengeTitan Machinery Inc. 251892 10 500 Ingersoll Ave, Crookston MN, 56716 218-281-4668 Mike MertenTitan Machinery Inc. 251892 19 4311 Haines Road, Hermantown MN, 55811 218-727-3038 Ben PiasTitan Machinery Inc. 251892 17 14375 James Road, Rogers MN, 55374 763-428-5099 Ben PiasTitan Machinery Inc. 251892 2 1201 North Hwy 59, Marshall MN, 56258 507-532-5783 Lucas HilgemannTitan Machinery Inc. 251892 5 4400W 62nd St N. Sioux Falls SD, 57104 605-336-3434 Matt LeightonTitan Machinery Inc. 251892 20 N 1626 Wuensch Road, La Crosse WI, 54601 608-788-1025 Don Benz

Titan MachineryCase Compact Excavators C-Series

June 28, 2019

SD_47181 OPERATOR'S MANUAL

SD_10181 CRAWLER TYPE

SD_30180 TRAVEL ALARM

SD_40003 COUNTERWEIGHT

SD_X5406 1ST AUX HYD TWO WAYS

SD_X6100 ARM

SD_X6207 HYDR Q/C PROV.

SD_X6210 BEACON

Factory Supplied Attachments

KLAC Buckets & Coupler

Pin-On/Mech. Buckets & Coupler

$1,535.00

48057610 Dead Pin Kit (for additional buckets)Required when ordering more than 1 bucket with a Pin-Grabber Coupler

5 LB $159.00

48057605 10"HD Bucket (Pin-on/Mechanical Coupler) 79 LB $357.0048057606 12"HD Bucket (Pin-on/Mechanical Coupler) 86 LB $384.0048057607 16"HD Bucket (Pin-on/Mechanical Coupler) 97 LB $437.0048057608 18"HD Bucket (Pin-on/Mechanical Coupler) 106 LB $505.0048057609 QUICK-HITCH

(Only compatible with C-Series buckets)Includes 1 set of dead pins for installation into a single bucket

29 LB

47422588 16" HD Bucket (KLAC Coupler) 106 LB $587.0047422589 18" HD Bucket (KLAC Coupler) 117 LB $655.0047422602 KLAC Base Plate (To adapt other buckets) 11 LB $237.0048057632 QUICK-HITCH

(Compatible with both the B/C-Series KLAC buckets)13 LB $848.00

747070 Beacon $280.00CX17C CANOPY US PRICE LIST

Order Code Description Weight Factory Data List Price

47422586 10" HD Bucket (KLAC Coupler) 88 LB $507.0047422587 12" HD Bucket (KLAC Coupler) 95 LB $534.00

747329 Long Arm - 747329Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.

$327.00

747065 W/O Q/C Provision No Charge747064 Hydraulic Q/C Provision

Includes switch & hydraulic lines to end of arm$500.00

XX6210X W/O Beacon No Charge

747996 Additional Counterweight.Additional Bolt-on weight adds 180 lb (82 kg)

$146.00

747054 2Way Aux Pedal Proportional No Charge747055 2Way Aux Joystick Proportional No Charge

747320 Short Arm - 747320 No Charge

9552700 Rubber TracksOne-piece molded rubber belt track w/ a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils & hard surfaces.

No Charge

ADDITIONAL EQUIPMENT MEX

747994 W/O Travel Alarm No Charge747453 Travel Alarm $166.00

747995 Standard Counterweight. No Charge

OPERATOR'S MANUAL

747480 Operators Manual - English No Charge747961 Operators Manual - French No Charge747464 Operators Manual- Spanish No Charge

VERSION

CX17C CANOPY US PRICE LIST

COMMERCIAL MODEL TECHNICAL TYPE Weight Factory Data List PriceCX17C CANOPY 698891711 3,910 LBS. $34,885.00



1 of 19


June 28, 2019





SD_X5405 2ND AUX. CIRCUIT


SD_X5430 THUMB CYL BRACKET

SD_X6100 ARM

SD_X6206 LINKAGE


SD_X6210 BEACONXX6210X W/O Beacon No Charge747070 Beacon $280.00

747062 Linkage With Hook No Charge747063 Linkage Without Hook ($61.00)



747059 W/O Thumb Bracket No Charge747058 Thumb Bracket $443.00



$327.00

747999 W/O 2nd Aux 2-Way Proportional No Charge747053 2nd Aux 2-Way Proportional

CX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.

$1,633.00



747995 Standard Counterweight. No Charge747996 Additional Counterweight.

Additional bolt on weight adds 286 lb (130 kg) - CX26C Additional bolt on weight adds 330 lb (150 kg) - CX37C CX37C - Add. Cwt comes w/ Angle Blade

$206.00

747961 Operators Manual - French No Charge747464 Operators Manual- Spanish No Charge

VERSION


No Charge



Order Code Description Weight Factory Data List PriceOPERATOR'S MANUAL

747480 Operators Manual - English No Charge


COMMERCIAL MODEL Weight Factory Data List PriceCX26C CANOPY 5,520 LBS. $41,575.00

2 of 19


June 28, 2019



Pin-On Buckets & Coupler

Thumbs

47457879 Dead Pin KitRequired when ordering more than 1 bucket with a Pin- Grabber Coupler

8 LB $177.00

48058019 Thumb Kit, Hyd.,Short Tines(Use with direct fit, KLAC buckets and Mechanical Pin-Grabber coupler)

150 LB $2,248.00

48094114 Thumb Kit, Hyd.,Long Tines(Use w/Hyd. Pin-Grabber coupler only)

150 LB $2,248.00

48057612 18"HD Bucket (Mech/Hyd Coupler) 70,000G

$623.00

48057613 24"HD Bucket (Mech/Hyd Coupler) 185 LB $797.0048057615 Coupler, Mechanical Pin-Grabber

(Only compatible with the C-Series bucket)Includes 1 set of dead pins for installation into a single bucket

95 LB $1,538.00

48094307 Coupler,Hydraulic Pin-Grabber(Compatible with both the B/C-Series buckets, when used with a B-Series bucket, it requires the removal of the spacer plates) Includes 1 set of dead pins for installation into a single bucket

48094117 18"HD Bucket (KLAC Coupler) 176 LB $625.00

99 LB $3,386.00

48094118 24"HD Bucket (KLAC Coupler) 209 LB $800.0048057633 Coupler, KLAC 71 LB $1,102.0047422632 KLAC Base Plate (To adapt other buckets) 20 LB $285.00

48057611 12"HD Bucket (Mech/Hyd Coupler) 121 LB $521.00




3 of 19


June 28, 2019








SD_X6100 ARM

SD_X6206 LINKAGE









$327.00



$1,633.00





$206.00

747961 Operators Manual - French No Charge747464 Operators Manual- Spanish No Charge

VERSION


No Charge


CX26C CAB US PRICE LIST


747480 Operators Manual - English No Charge


COMMERCIAL MODEL Weight Factory Data List PriceCX26C CAB 5,850 LBS. $47,535.00

4 of 19


June 28, 2019




Thumbs


99 LB $3,386.00


8 LB $177.00


150 LB $2,248.00

48094114 Thumb Kit, Hyd., Long Tines(Use w/Hyd. Pin-Grabber coupler only)

150 LB $2,248.00

48057611 12"HD Bucket (Mech/Hyd Coupler) 121 LB $521.0048057612 18"HD Bucket (Mech/Hyd Coupler) 70,000

G$623.00



95 LB $1,538.00

48094117 18"HD Bucket (KLAC Coupler) 176 LB $625.0048094118 24"HD Bucket (KLAC Coupler) 209 LB $800.0048057633 Coupler, KLAC 71 LB $1,102.0047422632 KLAC Base Plate (To adapt other buckets) 20 LB $285.00




5 of 19


June 28, 2019







SD_X6100 ARM

SD_X6206 LINKAGE






747055 2Way Aux Joystick Proportional No Charge



747453 Travel Alarm $207.00



$1,633.00

747054 2Way Aux Pedal Proportional No Charge

747464 Operators Manual- Spanish No ChargeVERSION


No Charge


747994 W/O Travel Alarm No Charge



747480 Operators Manual - English No Charge747961 Operators Manual - French No Charge


COMMERCIAL MODEL Weight Factory Data List PriceCX30C CANOPY 6,306 LBS. $47,266.00Includes the following EquipmentAdditional Counterweight. (747996) $206.00

6 of 19


June 28, 2019


1-Position Pin-On



Thumbs


8 LB $177.00


150 LB $2,248.00


150 LB $2,248.00

48057612 18"HD Bucket (Mech/Hyd Coupler) 70,000G

$623.00



95 LB $1,538.00


99 LB $3,386.00

48094118 24"HD Bucket (KLAC Coupler) 209 LB $800.0048057633 Coupler, KLAC 71 LB $1,102.0047422632 KLAC Base Plate (To adapt other buckets) 20 LB $285.00


48190705 18" High Capacity Bucket ONLY for usage w/o a coupler. $856.00


48094116 12"HD Bucket (KLAC Coupler) 143 LB $524.0048094117 18"HD Bucket (KLAC Coupler) 176 LB $625.00




7 of 19


June 28, 2019







SD_X6100 ARM

SD_X6206 LINKAGE


SD_X6210 BEACON



XX6210X W/O Beacon No Charge747070 Beacon $280.00

747058 Thumb Bracket $443.00



747053 2nd Aux 2-Way ProportionalCX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.

$1,633.00


747059 W/O Thumb Bracket No Charge


No Charge



747999 W/O 2nd Aux 2-Way Proportional No Charge

OPERATOR'S MANUAL


VERSION




COMMERCIAL MODEL Weight Factory Data List PriceCX30C CAB 6,636 LBS. $52,977.00Includes the following EquipmentAdditional Counterweight. (747996) $206.00

8 of 19


June 28, 2019


1-Position Pin-On



Thumbs


150 LB $2,248.00

48057615 Coupler, Mechanical Pin-Grabber(Only compatible with the C-Series bucket)Includes 1 set of dead pins for installation into a single bucket

95 LB $1,538.00


99 LB $3,386.00


8 LB $177.00

48058019 Thumb Kit, Hyd.,Short Tines(Use with direct fit, KLAC buckets and Mechanical Pin-Grabber coupl

150 LB $2,248.00

47422632 KLAC Base Plate (To adapt other buckets) 20 LB $285.00

48057611 12"HD Bucket (Mech/Hyd Coupler) 121 LB $521.0048057612 18"HD Bucket (Mech/Hyd Coupler) 70,000

G$623.00


48094116 12"HD Bucket (KLAC Coupler) 143 LB $524.0048094117 18"HD Bucket (KLAC Coupler) 176 LB $625.0048094118 24"HD Bucket (KLAC Coupler) 209 LB $800.0048057633 Coupler, KLAC 71 LB $1,102.00






9 of 19


June 28, 2019






(Ex Works)


SD_X6100 ARM

SD_X6206 LINKAGE


SD_X6210 BEACON

747064 Hydraulic Q/C ProvisionIncludes switch & hydraulic lines to end of arm

$500.00




747065 W/O Q/C Provision No Charge

747054 2Way Aux Pedal Proportional No Charge






$1,628.00



No Charge

9553700 Steel TracksSteel Track chain with steel grousers/shoes. Select this track for the most aggressive traction in soils & if there is no concern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. This track is intended for use on soils, but can be used on hard surfaces as well.

$1,322.00






COMMERCIAL MODEL Weight Factory Data List PriceCX33C CANOPY 7,396 LBS. $52,438.00Includes the following EquipmentAdditional Counterweight. (747996) $206.00

10 of 19


June 28, 2019




Thumbs

48058020 Thumb Kit, Hyd.,Long Tines(Use with direct fit and KLAC buckets)

150 LB $2,350.00

48058013 Coupler,Hydraulic Pin-Grabber(Compatible with both the B/C-Series buckets)

132 LB $3,386.00

48057624 Dead Pin Kit (for additional buckets)Required when ordering more than 1 bucket with a Pin- Grabber Coupler

11 LB $197.00

48057638 Ripper Tooth Pin-On 220 LB $929.00

48059646 Thumb Kit, Hyd.,Short Tines(Use with direct fit and KLAC buckets)

150 LB $2,350.00

48057617 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 161 LB $774.0048057619 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 205 LB $857.0048057620 24"HD Bucket (Pin-On & Mech/Hyd Coupler)

For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance. Always reference model lifting capacities when configuring units with attachments.

247 LB $998.00

48057623 Coupler, Mechanical Pin-Grabber (Compatible with both the B/C-Series buckets)Includes 1 set of dead pins for installation into a single bucket

43 LB $1,545.00

47422654 12"HD Bucket (KLAC Coupler) 189 LB $1,008.0047422655 18"HD Bucket (KLAC Coupler) 223 LB $1,091.0047422656 24"HD Bucket (KLAC Coupler)

For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance.Always reference model lifting capacities when configuring units with attachments

267 LB $1,233.00

48057634 Coupler, KLAC 43 LB $1,239.00



11 of 19


June 28, 2019






(Ex Works)



SD_X6100 ARM

SD_X6105 DOZER BLADE OPTION

SD_X6206 LINKAGE747062 Linkage With Hook No Charge747063 Linkage Without Hook ($61.00)



$327.00

747232 STD DOZER BLADE 747232 No Charge747981 4-Way Angle Dozer Blade

The weight of the dozer blade option adds 220 lbs. (100 kg)& includes the additional counterweight which adds 330 lbs. (150 kg) for a total added weight of 550 lbs. (250 kg)Option REQUIRES the additional counterweight 747996Includes bolt-on reversible cutting edge

$3,407.00





$210.00

747999 W/O 2nd Aux 2-Way Proportional No Charge

747053 2nd Aux 2-Way ProportionalCX37C - if ordering Angle Blade - 2nd 2-way Aux is used for the angle circuit. Cannot order 747053 with 7479814-way Angle Blade.NOTE: 2nd Aux INCLUDES 1st Aux hose options.

$1,892.00


No Charge


$1,536.00



OPERATOR'S MANUAL


VERSION

CX37C CANOPY. US PRICE LIST



COMMERCIAL MODEL Weight Factory Data List PriceCX37C CANOPY. 7,990 LBS. $50,655.00

12 of 19


June 28, 2019


SD_X6210 BEACON




Thumbs48057638 Ripper Tooth Pin-On 220 LB $929.00


150 LB $2,350.00

48058020 Thumb Kit, Hyd.,Long Tines(Use with Mech. and Hyd. Pin-Grabber couplers)

200 LB $2,350.00

48057622 36"Ditch Bucket (Pin-On & M/H Coupler) 313 LB $1,054.0048057623 Coupler, Mechanical Pin-Grabber (Compatible with both the B/C-Series

buckets)Includes 1 set of dead pins for installation into a single bucket

43 LB $1,545.00


132 LB $3,386.00


11 LB $197.00

48057617 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 161 LB $774.0048057619 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 205 LB $857.0048057620 24"HD Bucket (Pin-On & Mech/Hyd Coupler)

For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance. Always reference model lifting capacities when configuring units with attachments.

247 LB $998.00

48057621 36"HD Bucket (Pin-On & Mech/Hyd Coupler) 331 LB $1,270.00

47422655 18"HD Bucket (KLAC Coupler) 223 LB $1,091.0047422656 24"HD Bucket (KLAC Coupler)


267 LB $1,233.00

47422658 36"Ditch Bucket (KLAC Coupler) 315 LB $1,139.0048057634 Coupler, KLAC 43 LB $1,239.00




47422654 12"HD Bucket (KLAC Coupler) 189 LB $1,008.00




13 of 19


June 28, 2019








SD_X6100 ARM

SD_X6105 DOZER BLADE OPTION

SD_X6206 LINKAGE

747232 STD DOZER BLADE 747232 No Charge747981 4-Way Angle Dozer Blade

The weight of the dozer blade option adds 220 lbs. (100 kg)& includes the additional counterweight which adds 330 lbs. (150 kg) for a total added weight of 550 lbs. (250 kg)Option REQUIRES the additional counterweight 747996Includes bolt-on reversible cutting edge

$3,407.00





$327.00



$1,892.00





$210.00



No Charge


$1,536.00


CX37C CAB. US PRICE LIST




COMMERCIAL MODEL Weight Factory Data List PriceCX37C CAB. 8,300 LBS. $59,753.00

14 of 19


June 28, 2019


SD_X6210 BEACON




Thumbs



200 LB $2,350.00


132 LB $3,386.00


11 LB $197.00



150 LB $2,350.00

48057620 24"HD Bucket (Pin-On & Mech/Hyd Coupler)For CX33C models this size bucket is intended for useage w/o a coupler or thumb to achieve the optimal performance. Always reference model lifting capacities when configuring units with attachments.

247 LB $998.00

48057621 36"HD Bucket (Pin-On & Mech/Hyd Coupler) 331 LB $1,270.0048057622 36"Ditch Bucket (Pin-On & M/H Coupler) 313 LB $1,054.0048057623 Coupler, Mechanical Pin-Grabber (Compatible with both the B/C-Series

buckets)Includes 1 set of dead pins for installation into a single bucket

43 LB $1,545.00

47422658 36"Ditch Bucket (KLAC Coupler) 315 LB $1,139.0048057634 Coupler, KLAC 43 LB $1,239.00

48057617 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 161 LB $774.0048057619 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 205 LB $857.00



47422654 12"HD Bucket (KLAC Coupler) 189 LB $1,008.0047422655 18"HD Bucket (KLAC Coupler) 223 LB $1,091.0047422656 24"HD Bucket (KLAC Coupler)


267 LB $1,233.00




15 of 19


June 28, 2019




SD_X5202 TRACK GUIDE

9552613 Steel w/Pad Hole 400MMSteel track chain with steel grousers/shoes that have holes to accept bolt on rubber track pads. Select this track for the most aggressive traction in soils and if there is noconcern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. For added traction on hard surfaces such as asphalt or concrete and to help protect their surface finish it is recommended to use bolt on rubbertrack pads.

$2,200.00

9552610 Steel Tracks 450 MMSteel track chain with steel grousers/shoes. Select this track for the most aggressive traction in soils and if there is no concern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. This track is intended for use on soils, but can be used on hard surfaces as well.

$2,320.00


747453 Travel Alarm $304.00747994 W/O Travel Alarm No Charge

747096 Full Track GuideFull track guides for steel tracks and steel tracks with bolt on rubber track pads only

$676.00

747097 3-Piece Track Guide3-piece track guides for steel tracks and steel tracks with bolt on rubber track pads only

No Charge

747961 Operators Manual - French No ChargeVERSION

9552711 Rubber Tracks 400MMOne-piece molded rubber belt track with a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils and hard surfaces.

No Charge

9552710 Rubber Link Tracks 400MMSteel track chain with molded rubber grousers/shoes. These are also called hybrid tracks or roadliner tracks. Each Grouser/ shoe has a steel core completely molded in rubber and can be individually replaced since they are bolted to a steel chain.This track will offer the stability of a steel track with thesurface protection of a rubber track pad.

$11,986.00

9552612 Steel w/Pads 400 MMSteel track chain with steel grousers/shoes and bolt on rubber track pads. Each rubber track pad can be individually replaced or removed independently from the steel grouser/shoe. Select this option to gain traction on hard surfaces such as asphalt or concrete and to help protect their surface finish with the rubber track pads attached. All of the rubber track pads can be removed to perform as an all steel track as desired.

$4,241.00

CX57C COMPACT EXCAVATOR US PRICE LIST


747480 Operators Manual - English No Charge747464 Operators Manual- Spanish No Charge


COMMERCIAL MODEL Weight Factory Data List PriceCX57C CAB 12,270 LB $81,822.00Includes the following EquipmentAdditional Counterweight (747084) $676.00

16 of 19


June 28, 2019


SD_X5407 1ST AUX HYD CIRCUIT

SD_X5415 REAR AUX WORK LIGHTS

SD_X6100 ARM

SD_X6206 LINKAGE


SD_X6210 BEACON

SD_X9908 CAMERA




Thumbs


250 LB $2,453.00

48057636 Coupler, KLAC 55 LB $1,278.0047422660 KLAC Base Plate (To adapt other buckets) 31 LB $348.0047873455 ATTACHMENT, RIPPER TOOTH, 220 LB $929.00


250 LB


$2,453.00

47422704 24"HD Bucket (KLAC Coupler) 309 LB $1,379.0047422705 36"HD Bucket (KLAC Coupler) 408 LB $1,643.0047422658 36"Ditch Bucket (KLAC Coupler) 315 LB $1,139.0047872281 36"Cemetary Bucket (KLAC Coupler) 310 LB $1,200.00

48082917 Coupler, B/C-Series Universal Mechanical (Compatible with both the B/C-Series buckets)

85 LB $824.00

48057631 PINRequired when ordering more than 1 bucket with a Pin- Grabber Coupler

$209.00



48057629 36"Ditch Bucket (Pin-On & M/H Coupler) 313 LB $1,056.0048057637 36"Cemetary Bucket (Pin-On& M/H Coupler) 305 LB $1,200.0048057630 Coupler, Mechanical Pin-Grabber


74 LB $1,545.00

48058014 Coupler, Hydraulic Pin-Grabber(Only compatible with the C-Series bucket)

63 LB $3,251.00

48057625 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 190 LB $931.0048057626 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 240 LB $1,001.0048057627 24"HD Bucket (Pin-On & Mech/Hyd Coupler) 291 LB $1,143.0048057628 36"HD Bucket (Pin-On & Mech/Hyd Coupler) 388 LB $1,407.00

747087 W/O - Beacon ($47.00)

747089 W/O Rear View Camera No Charge747090 Rear View Camera $593.00



747063 Linkage Without Hook ($140.00)

747064 Hydraulic Q/C Provision $641.00747065 W/O Q/C Provision No Charge

747070 Beacon No Charge

747115 Rear Aux Work Lights No Charge

747078 Arm Short w/Thumb Bracket No Charge747079 Arm Long w/Thumb Bracket

Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.

$912.00

747062 Linkage With Hook No Charge

747053 2nd Aux 2-Way Proportional $2,641.00747999 W/O 2nd Aux 2-Way Proportional No Charge

747122 2Way Aux Joystick Proportional No Charge747123 2Way Aux Pedal Proportional $646.00


17 of 19


June 28, 2019





SD_X5202 TRACK GUIDE747097 3-Piece Track Guide

3-piece track guides for steel tracks and steel tracks with bolt on rubber track pads only

No Charge

9552613 Steel w/Pad Hole 400MMSteel track chain with steel grousers/shoes that have holes to accept bolt on rubber track pads. Select this track for the most aggressive traction in soils and if there is noconcern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. For added traction on hard surfaces such as asphalt or concrete and to help protect their surface finish it is recommended to use bolt on rubbertrack pads.

$2,200.00

9552610 Steel Tracks 450 MMSteel track chain with steel grousers/shoes. Select this track for the most aggressive traction in soils and if there is no concern for disrupting the appearance of ground conditions such as grass, asphalt or concrete. This track is intended for use on soils, but can be used on hard surfaces as well.

$2,320.00


747453 Travel Alarm $304.00747994 W/O Travel Alarm No Charge

747084 Additional CounterweightCX60C - additional bolt-on weight that adds 440 lb (200 kg)

$850.00

747995 Standard Counterweight. No Charge

747961 Operators Manual - French No ChargeVERSION

9552711 Rubber Tracks 400MMOne-piece molded rubber belt track with a steel cable core. The entire track must be replaced at time of service. Select this track for general use on soils and hard surfaces.

No Charge

9552710 Rubber Link Tracks 400MMSteel track chain with molded rubber grousers/shoes. These are also called hybrid tracks or roadliner tracks. Each Grouser/ shoe has a steel core completely molded in rubber and can be individually replaced since they are bolted to a steel chain.This track will offer the stability of a steel track with thesurface protection of a rubber track pad.

$12,502.00

9552612 Steel w/Pads 400 MMSteel track chain with steel grousers/shoes and bolt on rubber track pads. Each rubber track pad can be individually replaced or removed independently from the steel grouser/shoe. Select this option to gain traction on hard surfaces such as asphalt or concrete and to help protect their surface finish with the rubber track pads attached. All of the rubber track pads can be removed to perform as an all steel track as desired.

$4,424.00



747480 Operators Manual - English No Charge747464 Operators Manual- Spanish No Charge


COMMERCIAL MODEL Weight Factory Data List PriceCX60C CAB 12,940 LB $85,835.00

18 of 19


June 28, 2019


SD_X5407 1ST AUX HYD CIRCUIT

SD_X6100 ARM

SD_X6206 LINKAGE


SD_X6210 BEACON

SD_X9908 CAMERA




Thumbs

47422660 KLAC Base Plate (To adapt other buckets) 31 LB $348.0047873455 ATTACHMENT, RIPPER TOOTH, 220 LB $929.00


250 LB $2,453.00


47422702 12"HD Bucket (KLAC Coupler) 220 LB $1,165.0047422703 18"HD Bucket (KLAC Coupler) 256 LB $1,237.00

48059650 Thumb Kit, Hyd.,Short Tines(Use with Mech. and Hyd. Pin-Grabber couplers)

250 LB $2,453.00

47422705 36"HD Bucket (KLAC Coupler) 408 LB $1,643.0047422658 36"Ditch Bucket (KLAC Coupler) 315 LB $1,139.0047872281 36"Cemetary Bucket (KLAC Coupler) 310 LB $1,200.0048057636 Coupler, KLAC 55 LB $1,278.00

48057637 36"Cemetary Bucket (Pin-On& M/H Coupler) 305 LB $1,200.00


48057630 Coupler, Mechanical Pin-Grabber(Only compatible with the C-Series bucket)Includes 1 set of dead pins for installation into a single bucket

74 LB $1,545.00

48058014 Coupler, Hydraulic Pin-Grabber(Only compatible with the C-Series bucket)

63 LB $3,251.00

48082917 Coupler, B/C-Series Universal Mechanical (Compatible with both the B/C-Series buckets)

85 LB $824.00

48057631 PINRequired when ordering more than 1 bucket with a Pin- Grabber Coupler

$209.00

48057626 18"HD Bucket (Pin-On & Mech/Hyd Coupler) 240 LB $1,001.0048057627 24"HD Bucket (Pin-On & Mech/Hyd Coupler) 291 LB $1,143.0048057628 36"HD Bucket (Pin-On & Mech/Hyd Coupler) 388 LB $1,407.0048057629 36"Ditch Bucket (Pin-On & M/H Coupler) 313 LB $1,056.00

747089 W/O Rear View Camera No Charge747090 Rear View Camera $593.00



48057625 12"HD Bucket (Pin-On & Mech/Hyd Coupler) 190 LB $931.00

747064 Hydraulic Q/C Provision $641.00747065 W/O Q/C Provision No Charge

747070 Beacon No Charge747087 W/O - Beacon ($47.00)

747078 Arm Short w/Thumb Bracket No Charge747079 Arm Long w/Thumb Bracket

Long arm increases dig depth, resulting in a reduction in arm digging forces & lift capacity.

$912.00


747053 2nd Aux 2-Way Proportional $2,641.00747999 W/O 2nd Aux 2-Way Proportional No Charge



19 of 19

Titan MachineryCase Excavators CX75C/CX80C and all D-Series

October 11, 2019

Weight17,400 LBS

SD_E5311 BOOM481858

461025

SD_E5320 ARM/DIPPERSTICK

781172481265

481062481063

SD_E5199 TRACK SHOES95600179560002

9560018

9560020

SD_47083 OPERATOR'S MANUAL781981461540781980

SD_E5443 CAB GUARD (FOPS)XE5443X481070

SD_E5444 CAB GUARD (FRONT)XE5444X461142461024

SD_E6410 AUXILIARY HYDRAULICSXE6410X

CX75C MIN SWING RADIUS CRAWLER EXCAVATOR US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX75C W/DOZER BLADE $112,190.00


Order Code Description Weight Factory Data List PriceBOOMS

Std Boom12'4" (3.75 M) Standard Boom

No Charge

Offset Boom12'9" (3.89 M) Offset Boom

$7,730.00

ARMS

For use with Standard Boom5'7" (1.69 M) Arm No Charge7'2" (2.19 M) Arm $635.00

For use with Offset Boom5'9" (1.75 M) Standard Arm $942.006' 11" (2.11 M) Standard Arm $1,484.00

TRACK SHOES

18" (450mm) Steel Shoes, 3-bar No Charge23.6"(600mm) Steel ShoesBlade will not fully cover track width when using 24" shoes

$763.00

18"(450mm)Bolt-on Rubber TrackRubber pads bolted on regular 18" track

$5,882.00

17.7"(450mm)Full Rubber Tracks $3,588.00LANGUAGE

English Literature No ChargeFrench Canadian Literature No ChargeSpanish Literature No Charge

ADDITIONAL EQUIPMENT CXMADDITIONAL OPTIONS

No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard $1,146.00

No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L2)vertical bars (one piece/full length)

$2,324.00

No Optional Hydraulics No Charge

1 of 45


October 11, 2019

461868

461873

SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X461863

SD_E9702 REAR VIEW CAMERAXE9702X461504

SD_E9730 SAFETY VALVEXE9730X461559

SD_E9874 REFUEL PUMPXE9874X481257

For use with Standard BoomMulti Function - ProportionalMulti-Function Auxiliary Hydraulics For use with multiple applications: hammers/thumbs/grapples/crushersDoes not include the in-cab Electronic Pressure Control featureJoystick activated with Electronic Proportional Controls Provides single or dual pump, two-way flowSecondary Low-flow Auxiliary Hydraulics can be addedIncludes manually adjustable relief valve to set required pressures Is switchable to single acting flow for hammer applicationsNotes:1) Not for use with other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C Series excavators.

$6,885.00


For use with Offset BoomOffset Boom Double Aux HydOffset Boom Double Acting Auxiliary Hydraulics For use with Offset Boom option 461025 ONLY For use with Offset Short Arm 481062 ONLYFor use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C series excavators.

$3,783.00

No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858 Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional Controls

$4,039.00

No Rear View Camera No ChargeRear View Camera $646.00

No Hose Burst Check Valve No ChargeHose Burst Check ValveLocated on Boom and Arm Cylinder

$4,051.00

No Refuel Pump No ChargeRefuel Pump $1,296.00

2 of 45

















































October 11, 2019


Case Coupler

Case Coupler Buckets

Case Pin-On Buckets

Direct Link Thumb



47603261 Multi-Fit S Hyd.Pin Grabber Coupler Kit Full Kit and PinsOptimized for use with Case coupler buckets.Also can be used with a wide range of buckets from other manufacturers including pin-on types.Includes hydraulic installation kit and instructions.

205 LB $6,193.00

84422902 18" Heavy-Duty Coupler Bucket with 3 teeth (.24 cu. yd.) 440 LB $1,749.00





84404122 42" Ditching Pin-On Bucket (.60 cu. yd.) (.60 cu. yd.) $1,871.00

84404123 48" Ditching Pin-On Bucket (.70 cu. yd.) $1,947.0084422873 18" Heavy-Duty Pin-On Bucket with 3 teeth (.21 cu. yd.) 450 LB $1,375.00

84422885 24" Heavy-Duty Pin-On Bucket with 4 teeth (.31 cu. yd.) 530 LB $1,617.00




47609053 KIT, THUMB, HYD, 2-TINE,use with bucket only (2 tine - for use with buckets with odd number of teeth)

425 LB $4,043.00

47609054 KIT, THUMB, HYD, 2-TINE,use with bucket and coupler (2 tine - for use with buckets with odd number of teeth)

475 LB $4,285.00

47625914 KIT, THUMB, HYD, 2-TINE,use with bucket only (2 tine - for use with buckets with even number of teeth)

425 LB $4,043.00

47625915 KIT, THUMB, HYD, 2-TINE,use with bucket and coupler (2 tine - for use with buckets with even number of teeth)

475 LB $4,285.00

3 of 45


October 11, 2019

Weight18,900 LBS

SD_E5320 ARM/DIPPERSTICK781172481265

SD_E5199 TRACK SHOES956001795600029560018

9560020




SD_E6410 AUXILIARY HYDRAULICSXE6410X461868


SD_E9702 REAR VIEW CAMERAXE9702X461504



CX80C CRAWLER EXCAVATOR - W/ DOZER BLADE US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX80C $123,498.00


Order Code Description Weight Factory Data List PriceARMS

5'7" (1.69 M) Arm No Charge7'2" (2.19 M) Arm $635.00

TRACK SHOES

18" (450mm) Steel Shoes, 3-bar No Charge

$1,146.00

23.6"(600mm) Steel Shoes $763.0018"(450mm)Bolt-on Rubber TrackRubber pads bolted on regular 18" track

$5,882.00

17.7"(450mm)Full Rubber Tracks $3,588.00LANGUAGE

English Literature No Charge

No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L2)vertical bars (one piece/full length)

$2,324.00


French Canadian Literature No ChargeSpanish Literature No Charge

ADDITIONAL EQUIPMENT CXMADDITIONAL OPTIONS

No FOPS Top Cab Guard No ChargeFOPS Top Cab Guard

Multi Function - ProportionalMulti-Function Auxiliary Hydraulics For use with multiple applications: hammers/thumbs/grapples/crushersDoes not include the in-cab Electronic Pressure Control featureJoystick activated with Electronic Proportional Controls Provides single or dual pump, two-way flowSecondary Low-flow Auxiliary Hydraulics can be addedIncludes manually adjustable relief valve to set required pressures Is switchable to single acting flow for hammer applicationsNotes:1) Not for use with other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C Series excavators.

$6,885.00

No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments. For use with Standard Boom option 481858Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional Controls

$4,039.00

No Rear View Camera No ChargeRear View Camera $646.00

No Hose Burst Check Valve No ChargeHose Burst Check ValveLocated on Boom and Arm Cylinder

$4,051.00


4 of 45


























October 11, 2019



Case Multi Fit Coupler

Case Pin On Buckets

Direct Link Thumb








47603261 Multi-Fit S Hyd.Pin Grabber Coupler Kit Full Kit and PinsOptimized for use with Case coupler buckets.Also can be used with a wide range of buckets from other manufacturers including pin-on types.Includes hydraulic installation kit and instructions.

205 LB $6,193.00

84404122 42" Ditching Pin-On Bucket (.60 cu. yd.) (.60 cu. yd.) $1,871.00

$4,285.00

84404123 48" Ditching Pin-On Bucket (.70 cu. yd.) $1,947.0084422873 18" Heavy-Duty Pin-On Bucket with 3 teeth (.21 cu. yd.) 450 LB $1,375.00



47625914 KIT, THUMB, HYD, 2-TINE,use with bucket only (2 tine - for use with buckets with even number of teeth)

425 LB $4,043.00

47625915 KIT, THUMB, HYD, 2-TINE,use with bucket and coupler (2 tine - for use with buckets with even number of teeth)

475 LB $4,285.00



47609053 KIT, THUMB, HYD, 2-TINE,use with bucket only (2 tine - for use with buckets with odd number of teeth)

425 LB $4,043.00

47609054 KIT, THUMB, HYD, 2-TINE,use with bucket and coupler (2 tine - for use with buckets with odd number of teeth)

475 LB

5 of 45


October 11, 2019

Weight28,400 LB30,400 LB

SD_E5408 WORKING LIGHTS488134488135

SD_E5311 BOOM481858

781917

SD_E5320 ARM/DIPPERSTICK461574781174781178XE5320X

SD_E5199 TRACK SHOES9560013

9560003

9560052


CX130D CRAWLER EXCAVATOR US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX130D STD LC $186,269.00CX130D STD DZB $209,424.00


Order Code Description Weight Factory Data List PriceLIGHTS

Halogen Working Lights No ChargeLED Working Lights8 LED light and 1 side camera:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab

$2,754.00

BOOMS

Std Boom15'2" (4.63 M) Boom

No Charge

No BoomLess boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided.

($3,293.00)

ARMS

6'10" (2.11 m) HD Arm ($433.00)8'2" (2.50 m) Std Arm No Charge9'10" (3.01 m) Std Arm $737.00No Arm/DipperstickLess arm, bucket cylinder and linkage

($2,080.00)

TRACK SHOES

23.6" (600 mm) Steel ShoesTriple-Grouser Steel Shoes

No Charge

27.6" (700mm) TG Steel ShoesTriple-Grouser Steel Shoes

$1,245.00

20" (500mm) Rubber PadsSteel Chain with individual rubber pads (steel pads coated with rubber)

$10,106.00

LANGUAGE

French Canadian Literature No ChargeSpanish Literature No ChargeEnglish Literature No Charge

6 of 45


October 11, 2019


461869




461024

461552

SD_E5449 RAIN DEFLECTORXE5449X461555


ADDITIONAL EQUIPMENT CXCHYDRAULIC OPTIONS

No Optional Hydraulics No ChargeThumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.

$5,714.00

MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control featurePressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.

$9,331.00

No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsLow Flow Electrical Proportional Control Joystick ActivatedProvides low-flow for rotation or tilt of hydraulic tools.Notes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.

$6,643.00

CAB OPTIONS


No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)

$1,973.00

Front Stone Guard (OPG L2)vertical bars (one piece/full length)

$2,324.00

Vandal GuardRemovable steel panels for front windshield

$574.00

No Rain Deflector No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.

$380.00

7 of 45



































































October 11, 2019

SD_E5451 SUN VISORXE5451X461554

SD_E6300 EXCAVATOR BUCKET(S)XE6300X

SD_E5206 TRACK CHAIN GUIDEXE5206X461542

SD_E6400 MEC/HYD QUICK COUPLERXE6400X781128


SD_E9739 FULL VIEW CAMERAXE9739X488055



No Charge

No Sun Visor No ChargeSun Visor $108.00

Hydraulic Quick Coupler ReadyDoes not come with coupler. Must order coupler from Factory Supplied Attachments section

$1,974.00

No Hose Burst Check Valve No ChargeHose Burst Check Valve (HBCV)Located on Boom and Arm Cylinder

$7,913.00

No max view monitor No Charge

BUCKETS

No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments Section

No Charge

ADDITIONAL OPTIONS

No Track Chain Guide No ChargeDouble Track Chain Guide $728.00

No Quick Coupler

Case Max View Monitor $1,700.00


8 of 45


October 11, 2019


Case Coupler


Case Pin-On Buckets

Direct Link Thumb

Progressive Link Thumb



47867959 Multi-Fit S Hyd.Pin Grabber Coupler Kit 551 LB $5,197.00

84404117 24" Heavy Duty (HD) Coupler Bucket with 4 teeth (.43 cu. yd.) $4,075.00




84404093 24" Heavy-Duty Pin-On Bucket with 4 teeth (.50 cu. yd.) $2,948.00


84404103 36" Heavy-Duty Pin-On Bucket with 5 teeth (.79 cu. yd.) 1,301 LB $3,329.00


84404105 24" HD Hi-Capacity Pin-On Bucket with 4 teeth (.58 cu. yd.) $3,158.00


84404109 36" HD Hi-Capacity Pin-On Bucket with 5 teeth (.91 cu. yd.) 1,433 LB $3,838.00

84404110 42" HD Hi-Capacity Pin-On Bucket with 5 teeth (1.08 cu. yd.) $4,097.00

84404113 48" Ditching Pin-On Bucket (.79 cu. yd.) $2,992.0084404115 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,394.00

47609058 Hydraulic Main Pin Direct Link Thumb use with bucket only (2 tine) 830 LB $6,569.00

47609059 KIT, THUMB, HYD, 4-TINE,use with bucket only (3 tine)

860 LB $6,953.00

47609060 KIT, THUMB, HYD, 3-TINE,use with bucket and coupler (2 tine)

870 LB $6,813.00


910 LB $7,293.00

47609095 KIT, THUMB, PROG LINK, 3-use with bucket only (2 tine)

1,170 LB $8,256.00


1,200 LB $8,640.00

47609097 KIT, THUMB, PROG LINK, 3-use with bucket and coupler (2 tine)

1,200 LB $8,504.00


1,210 LB $8,980.00

9 of 45


October 11, 2019



SD_E5311 BOOM481858

461025

781917


461574

781178

XE5320X

SD_E5199 TRACK SHOES956001395600399560052


CX145D LC AND CX145D STD/DZ US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX145D MSR LC $182,395.00CX145D MSR W/DOZER $192,622.00



Halogen Working Lights No ChargeLED Working Lights8 LED lights:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab

$2,754.00

BOOMS

Std Boom15' 6" (4.72 M) Standard Boom

No Charge

Offset Boom15' 6" (4.72 M) Offset BoomFor use with CX145C/D MSR W/DOZER

$21,600.00

No BoomLess boom, hoist and arm cylinders and plumbing. Boom foot and cylinder pins are provided.

($3,378.00)

ARMS

8'2" (2.50 m) Std ArmFOR USE WITH STANDARD BOOM (options 481858)

No Charge

6'10" (2.11 m) HD ArmFOR USE WITH STANDARD BOOM (options 481858)(Recommended for heavy-duty applications - example: hammer)

$576.00

9'10" (3.01 m) Std ArmFOR USE WITH STANDARD BOOM (options 481858)

$1,089.00

No Arm/DipperstickLess arm, bucket cylinder and linkage

($2,051.00)

TRACK SHOES

23.6" (600 mm) Steel Shoes ($1,547.00)27.5" (700 mm) Steel Shoes No Charge20" (500mm) Rubber PadsSteel Chain with individual rubber pads (steel pads coated with rubber)

$8,277.00

LANGUAGE


10 of 45


October 11, 2019


461865

461869

461871





No Optional Hydraulics No ChargeFor use with Standard Boom

Single Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.

$7,027.00

MF w/ pressure setting - PropMulti-Function Auxiliary Hydraulics with Electronic Pressure Control (EPC)For use with multiple applications: hammers/thumbs/grapples/crushers.Includes in-cab Electronic Pressure Control feature Pressure Control feature allows hydraulic pressure setting from the cab monitor and maintaining pressure settings in memory when multiple tools are used.Joystick Activated with Electronic Proportional ControlsProvides single or dual pump, two-way flow, Secondary Low-flow Auxiliary Hydraulics can be addedIncludes in-cab electronically controlled pressure setting feature Is switchable to single acting flow for hammer application.Notes:1) Not for use with other Auxiliary Hydraulics options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.

$9,905.00

For use with Offset BoomThumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.

$5,864.00

No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858 Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.

$6,683.00

CAB OPTIONS


11 of 45


























































































October 11, 2019


461024

461552




SD_E5206 TRACK CHAIN GUIDEXE5206X461542






$1,973.00


$2,324.00


$574.00


$380.00


BUCKETS


No Charge

ADDITIONAL OPTIONS

No Track Chain Guide No ChargeDouble Track Chain Guide $728.00

No Quick Coupler No ChargeHydraulic Quick Coupler ReadyOnly available on the D series

$2,304.00


$8,667.00

No max view monitor No ChargeCase Max View Monitor $1,700.00

12 of 45


October 11, 2019



Case Pin-On Buckets

Direct Link Thumb













84404109 36" HD Hi-Capacity Pin-On Bucket with 5 teeth (.91 cu. yd.) 1,433 LB $3,838.00




$5,197.00


860 LB $6,953.00


870 LB $6,813.00


910 LB $7,293.00


1,170 LB $8,256.00


1,200 LB $8,640.00


1,200 LB $8,504.00


1,210 LB $8,980.00

47867959 Multi-Fit S Hyd.Pin Grabber Coupler Kit 551 LB

13 of 45


October 11, 2019

Weight38,400 LB


SD_E5311 BOOM481858

781917

SD_E5320 ARM/DIPPERSTICK781176781178XE5320X


9560003



461865

CX160D CRAWLER EXCAVATOR (STD LC) US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX160D STD LC $223,212.00




$2,754.00

BOOMS

Std Boom16' 11" (5.15 m) Standard Boom

No Charge


($4,767.00)

ARMS

8'7" (2.63 m) Std Arm No Charge9'10" (3.01 m) Std Arm $1,300.00No Arm/DipperstickLess arm, bucket cylinder and linkage

($2,600.00)

TRACK SHOES


No Charge


$1,612.00

LANGUAGE



No Optional Hydraulics No ChargeNot for use with No Boom


$7,271.00

14 of 45























October 11, 2019

461871

461869




461024

461552




Thumb - Proportional SWDouble Acting Auxiliary Hydraulics For use with thumb applicationsJoystick Activated with Electronic Proportional Controls Provides single pump, two-way flowHydraulic plumbing provided to the end of the boom only, no piping to the armThis system is not switchable to single acting flowNotes:1) Not for use other Auxiliary Hydraulics options with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.

$6,012.00


$9,905.00


$6,721.00

CAB OPTIONS



$380.00



$1,973.00


$2,324.00


$574.00

15 of 45





































































October 11, 2019


SD_E5206 TRACK CHAIN GUIDE461541461143






BUCKETS


No Charge

ADDITIONAL OPTIONS

Single Track Chain Guide No ChargeTriple Track Chain Guide $1,123.00

No Quick Coupler No ChargeHydraulic Quick Coupler ReadyDoes not come with coupler. Must order coupler from Factory Supplied Attachments section

$2,079.00


$7,913.00



16 of 45


October 11, 2019


Case Coupler


Case Pin-On Buckets

Direct Link Thumb




47867960 Multi-Fit S Hyd.Pin Grabber Coupler Kit 793 LB $5,620.00

84404140 24" Heavy-Duty Coupler Bucket with 4 teeth (.51 cu. yd.) $4,495.00

84404141 30" Heavy-Duty Coupler Bucket wtih 4 teeth (.66 cu. yd.) $4,924.00






84404129 42" Heavy-Duty Pin-On Bucket with 5 teeth (1.08 cu. yd.) $4,163.00




84404134 42" Heavy-Duty Pin-On Bucket wtih 5 teeth (1.22 cu. yd.) $4,392.00

$9,725.00



840 LB $7,220.00


860 LB $7,639.00

47609104 KIT, THUMB, PROG LINK, 3- 1,325 LB $9,591.0047609106 Progressive Link Thumb Kit with Coupler use with bucket and coupler (4

tine)1,345 LB $10,037.00


985 LB $7,504.00


1,005 LB $7,951.00


1,180 LB $9,307.00


1,200 LB

17 of 45


October 11, 2019



SD_E5311 BOOM481858

781917


481268

XE5320X


9560003

9560005

9560007

9560055



CX210D CRAWLER EXCAVATOR (STD LC & NRRW) US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX210D STD LC $258,171.00CX210D NRRW $256,176.00Includes the following Equipment23.6" (600 mm) Steel Shoes (9560013) ($867.00)




$2,754.00

BOOMS


No Charge

No BoomLess boom, hoist and arm cylinders and plumbing. Boom-foot and cylinder pins are provided.Not for use with CX210D NRRW

($5,374.00)

ARMS

7'10" (2.40 m) HD ArmFor use with 18'8" Standard Boom (option 481858) (Recommended for heavy-duty applications - example: hammer)

($548.00)

9'8" (2.94 M) ArmFor use with 18'8" Standard Boom (option 481858)

No Charge


($3,033.00)

TRACK SHOES

23.6" (600 mm) Steel ShoesTriple-Grouser Steel ShoesFor use with CX210D STD LC and CX210D NRRW

($867.00)

27.6" (700mm) TG Steel ShoesTriple-Grouser Steel Shoes For use with CX210D STD LC

($351.00)

31.5" (800 mm) TG Steel ShoesTriple-Grouser Steel Shoes For use with CX210D STD LC

No Charge

35.4" (900 mm) Steel ShoesTriple-Grouser Steel ShoesFor use with CX210D STD LC commercial model only

$1,456.00

23.6" (600 mm) Rubber PadsRubber pads molded to steel base on standard chain For use with CX210D STD LC and CX210D NRRW

$12,134.00

LANGUAGE




18 of 45


October 11, 2019

461865

461871

461869




461024

461552


Not for use with No BoomSingle Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.

$8,499.00


$6,599.00


$11,374.00

No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.

$7,039.00

CAB OPTIONS



$1,973.00


$2,324.00


$574.00

19 of 45


























































































October 11, 2019




SD_02005 ENGINE PRE-CLEANERX02005X488031


SD_E5407 COOLING PACKAGEXE5407X481027




SD_E9742 REVERSIBLE FANXE9742X488121




$380.00


BUCKETS


No Charge

ADDITIONAL OPTIONS

No Pre-Cleaner No ChargePre-Cleaner Cyclone $470.00


Standard Cooling Package No ChargeTropical Cooling PackageHigh ambient temperature cooling package Includes hardware to support the cooling of the main machine systems.Must also order: Pre-Cleaner Cyclone option 488031 Note: Recommended for machines operating in high heat conditions not to exceed 122°F (50°C)Not for use with CX210D NRRW

$504.00


$2,188.00


$7,913.00


No Reversible Fan No ChargeReversible FanVariable pitch reversing fan features rotating blades, that provides maximum airflow in either direction when engaged by operator.

$8,709.00


20 of 45


October 11, 2019



Case Pin On Buckets

Coupler

Direct Link Thumb






84404189 36" Heavy-Duty Coupler Bucket with 5 teeth (1.02 cu. yd.) $6,556.00











84404180 48" HD Hi-Capacity Pin-On Bucket with 6 teeth (1.72 cu. yd.) 2,650 LB $6,056.00

84404181 24" Severe-Duty Pin-On Bucket with 4 teeth (.65 cu. yd.) $5,404.00


84404183 36" Severe-Duty Pin-On Bucket with 5 teeth (1.03 cu. yd.) $6,780.00


84404185 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,620.0084404186 72" Ditching Pin-On Bucket(1.22 cu. yd.) $3,921.0084405214 48" Heavy-Duty Pin-On Bucket $5,360.00

47855901 KIT, COUPLER, MULTI-FIT S 683 LB $5,882.00

$11,660.00


1,155 LB $8,604.00


1,190 LB $9,089.00


1,300 LB $8,972.00


1,325 LB $9,573.00


1,680 LB $11,176.00


1,680 LB $11,176.00


1,825 LB $11,059.00


1,850 LB

21 of 45


October 11, 2019

Weight49,090 LB


SD_E5311 BOOM461029



9560007





461024

461552

CX210D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX210D LR $296,852.00




$2,754.00

BOOMS

Standard Long Reach Boom28'7" (8.70 M) Long Reach Boom

No Charge

ARMS

21'0" (6.40 M) Arm No ChargeTRACK SHOES

31.5" (800 mm) TG Steel ShoesTriple-Grouser Steel Shoes

No Charge


$1,456.00

LANGUAGE



No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments. Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.

$7,874.00

CAB OPTIONS



$1,973.00


$2,324.00


$574.00

22 of 45




















October 11, 2019












Case Pin On Buckets

Direct Link Thumb


$380.00



BUCKETS

No BucketBuckets may be ordered using Order Codes listed in the Factory Supplied Attachments section

No Charge

ADDITIONAL OPTIONS



Standard Cooling Package No ChargeTropical Cooling PackageHigh ambient temperature cooling package Includes Pre-Cleaner Cyclone option 488031Note: Recommended for machines operating in high heatconditions not to exceed 122°F (50°C)

$504.00


$2,187.00


$7,913.00


No Refuel Pump No Charge

KIT, THUMB, HYD, 4-TINE,use with bucket and coupler (3 tine)

910 LB $7,293.00

Refuel Pump $1,296.00CX210D LONG REACH CRAWLER EXCAVATOR (LR) US PRICE LIST





860 LB $6,953.00


870 LB $6,813.00

47609061

23 of 45


October 11, 2019



SD_E5311 BOOM481858

781917


461501

XE5320X


9560013956003995600469560055



SD_E6423 CONTROL PATTERN SELECTION461558


CX245D LC AND CX245D LC DZ US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX245D MSR LC $276,626.00CX245D MSR LC W/DOZER $318,359.00



Halogen Working Lights No ChargeLED Working Lights8 LED lights:2 LED light are mounted on the front (1 on boom, 1 on house) 2 LED lights are mounted on the rear(above the rear view camera)1 LED light mounted on each side (2)2 LED lights mounted on the top of the cab

$2,754.00

BOOMS

Std Boom18'8" (5.70 M) Standard BoomFor use with CX235C MSR LC and CX235C MSR w/dozer commercial models.

No Charge


($6,057.00)

ARMS

9'8" (2.94 M) ArmFor use wtih 18'8" Standard Boom (option 481858)

No Charge

7'10" (2.40 m) HD ArmFor use with 18'8" Standard Boom (option 481858) (Recommended for heavy-duty applications - example: hammer)

($273.00)


($3,142.00)

TRACK SHOES

35.4" (900 mm) Steel ShoesTriple-Grouser Steel ShoesNot for use with the CX245D MSR with Dozer Blade

$1,456.00

23.6" (600 mm) Steel Shoes ($1,547.00)27.5" (700 mm) Steel Shoes ($178.00)31.5" (800 mm) Steel Shoes No Charge23.6" (600 mm) Rubber PadsSteel Chain with individual rubber tracks (steel base coated with rubber)

$12,118.00

LANGUAGE


BUCKETS

No Bucket No ChargeADDITIONAL EQUIPMENT CXCPLUMBING AND ACTUATION FOR AUXILIARY HYDRAULICS

Control Pattern Selector Valve No ChargeHYDRAULIC OPTIONS


24 of 45


October 11, 2019

461865

461871

461869





$8,606.00


$6,719.00


$11,471.00


$7,105.00

CAB OPTIONS


25 of 45



























































































October 11, 2019


461024

461552





SD_E9730 SAFETY VALVEXE9730X

481064




$1,973.00


$2,324.00


$574.00


$380.00


ADDITIONAL OPTIONS


No Quick Coupler No ChargeHydraulic Quick Coupler Ready $2,304.00

No Hose Burst Check ValveLocated on Boom and Arm Cylinder

No Charge

Hose Burst Check Valve (HBCV)(BOOM/ARM) WARNING DEVICE

$8,667.00


26 of 45


October 11, 2019



Case Pin-On Buckets

Direct Link Thumb

Coupler




















84404185 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,620.0084404186 72" Ditching Pin-On Bucket(1.22 cu. yd.) $3,921.00


1,155 LB $8,604.00


1,190 LB $9,089.00


1,300 LB $8,972.00


1,325 LB $9,573.00

47855901 KIT, COUPLER, MULTI-FIT S 683 LB $5,882.00

27 of 45


October 11, 2019

Weight56,909 LBS


SD_E5311 BOOM481858

781917


781178

781149

XE5320X


9560003

9560005

9560007


CX250D STD CRAWLER EXCAVATOR US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX250D STD $335,348.00




$2,754.00

BOOMS


No Charge


($6,769.00)

ARMS

8'2" (2.50 m) HD ArmFor use with 19"2" Standard Boom (option 481858) (Recommended for heavy-duty applications - example: hammer)

$217.00

9'10" (3.01 m) Std ArmFor use with 19'2" Standard Boom (option 481858)

No Charge

11'6" (3.52 M) Standard ArmFor use with 19'2" Standard Boom (option 481858)

$1,300.00

No Arm/DipperstickLess arm, bucket cylinder and linkage.

($3,467.00)

TRACK SHOES


($1,153.00)


($568.00)


No Charge

35.4" (900 mm) Steel Shoes $1,377.00LANGUAGE


28 of 45


October 11, 2019


461871

461869

SD_E6417 SECONDARY AUXILIARY HYDRAULICSXE6417X

(Ex Works Port of Entry)461863


No Charge



$8,710.00


$6,838.00


$11,536.00

No Low Flow Circuit No Charge


No Optional Hydraulics

Secondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.For use with Standard Boom option 481858 Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.

$7,171.00

CAB OPTIONS


29 of 45

























































































October 11, 2019


461024

461552














$1,973.00


$2,324.00


$574.00


$380.00


BUCKETS


No Charge

ADDITIONAL OPTIONS



Standard Cooling Package No ChargeTropical Cooling PackageHigh ambient temperature cooling package Includes hardware to support the cooling of the main machine systems.Must also order: Pre-Cleaner Cyclone option 488031 Note: Recommended for machines operating in high heatconditions not to exceed 122°F (50°C)

$504.00


$2,304.00


$7,913.00



$8,709.00


30 of 45


October 11, 2019


Case Pin On Buckets


Coupler

Direct Link Thumb









84404230 48" Extra Heavy Duty Bucket with 6 teeth (1.88 cu. yd.) $7,103.00










47848464 Multi-Fit S Coupler Kit 1,265 LB $8,414.00

$12,795.00


1,235 LB $9,136.00


1,275 LB $9,621.00


1,380 LB $9,539.00


1,415 LB $10,155.00


1,760 LB $11,776.00


1,800 LB $12,261.00


1,905 LB $12,179.00


1,940 LB

31 of 45


October 11, 2019

Weight62,100 LBS


SD_E5311 BOOM461029







461024

461552

CX250D LONG REACH CRAWLER EXCAVATOR US PRICE LIST





$2,754.00

BOOMS

Standard Long Reach Boom33'10" (10.30 M) Long Reach Boom

No Charge

ARMS

26'3" (8.00 M) ArmFor use with 33'10" Standard Long Reach Boom (option 461029)

No Charge

TRACK SHOES


No Charge

LANGUAGE



No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments. Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.

$8,083.00

CAB OPTIONS



$1,973.00


$2,324.00


$574.00

32 of 45




















October 11, 2019







SD_E9730 SAFETY VALVEXE9730X

481064




Case Pin On Buckets

Direct Link Thumb

Fabco Buckets


$380.00



BUCKETS


No Charge

ADDITIONAL OPTIONS



Standard Cooling Package No ChargeTropical Cooling PackageHigh ambient temperature cooling package Includes Pre-Cleaner Cyclone option 488031Note: Recommended for machines operating in high heatconditions not to exceed 122°F (50°C)

$504.00

No Hose Burst Check ValveLocated on Boom and Arm Cylinder

No Charge

Hose Burst Check Valve (HBCV)boom and arm

$7,913.00




870 LB $6,813.00




84404113 48" Ditching Pin-On Bucket (.79 cu. yd.) $2,992.00


910 LB $7,293.00



84404115 60" Ditching Pin-On Bucket (1.02 cu yd.) $3,394.00



860 LB $6,953.00


33 of 45


October 11, 2019

Weight72,100 LB


SD_E5311 BOOM461031


SD_E5199 TRACK SHOES9560025956000395600139560005



SD_E5444 CAB GUARD (FRONT)461552

781986461024






SD_E9908 TELEMATICS ON BOARD461860

SD_E9909 TELEMATICS SERVICE461742

CX290D LC MATERIAL HANDLING US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX290D LC MH $495,947.00

CX290D LC MATERIAL HANDLING US PRICE LIST



$2,754.00

BOOMS

MATERIAL HANDLING B No ChargeARMS

16'5" (5.0 M) Arm No ChargeTRACK SHOES

23.6" (600mm) Flat Steel Shoes No Charge27.6" (700mm) TG Steel Shoes ($11,022.00)23.6" (600 mm) Steel Shoes ($11,749.00)31.5" (800 mm) TG Steel Shoes ($10,308.00)

LANGUAGE


ADDITIONAL EQUIPMENT CXC

No FOPS Top Cab Guard No ChargeFOPS Top Cab GuardNot for use with Vandal Guard option 461552

$1,089.00


($1,399.00)

Front Stone Guard (OPG L1) No ChargeFront Stone Guard (OPG L2) $351.00

ADDITIONAL OPTIONS



No Rain Deflector No ChargeRain DeflectorNot for use with Front Stone Guard option listed in the Cab Guard Section

$380.00

CASE SiteWatch Telematics No Charge

3 YEARS ADV SUB No Charge



$8,709.00

TELEMATICS

34 of 45


October 11, 2019

Weight71,700 LB


SD_E5311 BOOM461032


SD_E5199 TRACK SHOES9560025956000395600139560005



SD_E5444 CAB GUARD (FRONT)461552

781986461024






SD_E9908 TELEMATICS ON BOARD461860

SD_E9909 TELEMATICS SERVICE461742

CX290D LC SCRAP US PRICE LIST

COMMERCIAL MODEL Factory Data List PriceCX290D LC SC $493,587.00

CX290D LC SCRAP US PRICE LIST



$2,754.00

BOOMS

MATERIAL HANDLING S No ChargeARMS

GOOSE NECK ARM No ChargeTRACK SHOES

23.6" (600mm) Flat Steel Shoes No Charge27.6" (700mm) TG Steel Shoes ($11,022.00)23.6" (600 mm) Steel Shoes ($11,749.00)31.5" (800 mm) TG Steel Shoes ($10,308.00)

LANGUAGE


ADDITIONAL EQUIPMENT CXC

No FOPS Top Cab Guard No ChargeFOPS Top Cab GuardNot for use with Vandal Guard option 461552

$1,089.00


($1,399.00)

Front Stone Guard (OPG L1) No ChargeFront Stone Guard (OPG L2) $351.00

ADDITIONAL OPTIONS



No Rain Deflector No ChargeRain DeflectorNot for use with Front Stone Guard option listed in the Cab Guard Section

$380.00



$8,709.00

TELEMATICS

CASE SiteWatch Telematics No Charge

3 YEARS ADV SUB No Charge

35 of 45


October 11, 2019

Weight67,271 LBS


SD_E5311 BOOM481858

781917


781180

481850

XE5320X


9560003

9560005








$2,754.00

BOOMS


No Charge


($7,367.00)

ARMS


($433.00)


No Charge

12' (3.66 M) Standard ArmFor use with 20'2" Standard Boom (option 481858)

$1,127.00


($3,909.00)

TRACK SHOES


($871.00)


($672.00)


No Charge

LANGUAGE



No Optional Hydraulics No ChargeSingle Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.

$9,379.00

36 of 45























October 11, 2019

461871

461869





$6,996.00


$11,934.00


$7,647.00

CAB OPTIONS


37 of 45






































































October 11, 2019


461024

461552











No ChargeRain DeflectorNot for use with Front grill guard - 2 x 2 mesh option 461142, Front rock guard (OPG 1) option 781986, orFront rock guard (OPG 2) option 461024.

$380.00

No Front Guard No ChargeFront Guard - Wire Mesh Screen $1,326.00



BUCKETS


No Charge

ADDITIONAL OPTIONS

No Pre-Cleaner No Charge

Front Stone Guard (OPG L1)vertical bars (two piece/upper and lower)

$1,973.00


$2,324.00


$574.00

No Rain Deflector

Pre-Cleaner Cyclone $972.00



$2,764.00


$9,165.00



$8,709.00


38 of 45


October 11, 2019


Case Pin On Buckets


Coupler

Direct Link Thumb














84404266 60" Ditching Pin-On Bucket (1.71 cu yd.) $5,693.0084404267 72" Ditching Pin-On Bucket (2.09 cu yd.) $6,068.00





47848465 Multi-Fit S Hyd.Pin Grabber Coupler Kit 1,009 LB $8,414.00


1,235 LB $10,896.00


1,275 LB $11,540.00


1,380 LB $11,199.00


1,415 LB $11,740.00


1,760 LB $13,136.00


1,800 LB $13,380.00


1,905 LB $13,439.00

47609122 Progressive Link Thumb Kit with Coupler use with bucket and coupler (4 tine)

1,940 LB $13,899.00

39 of 45


October 11, 2019

Weight82,483 LBS


SD_E5311 BOOM481858

461543

781917


781184

461546

461545

XE5320X


9560005

9560006

9560049







$2,754.00

BOOMS


No Charge

Heavy-Duty Boom21'2" (6.45 M)

$2,639.00


($7,800.00)

ARMS

10' 8" (3.25 m) Std ArmFor use with 21'2" Standard Boom (option 481858)

No Charge

13'3" (4.03 m) Std ArmFor use with 21'2" Standard Boom (option 481858)

$2,769.00

8'8" (2.63 m) HD ArmFor use with Heavy-Duty Boom option 461543

$139.00

10'8" (3.25 m) HD ArmFor use with Heavy-Duty Boom option 461543

$2,279.00

No Arm/DipperstickLess arm, bucket cylinder and linkage.

($5,200.00)

TRACK SHOES


($780.00)


No Charge


$680.00

27.6" (700 mm) SG Steel ShoesSingle-Grouser Steel Shoes

$4,993.00

LANGUAGE


40 of 45


October 11, 2019


461871

461869




461024

461552


No Optional Hydraulics No ChargeSingle Acting Auxiliary HydSingle Acting Auxiliary HydraulicsFor use with hammers or vibratory compaction plate applicationsJoystick activated with Electronic Proportional Controls Provides single direction flowIncludes manually adjustable relief valve to set required pressuresNotes:1) Not for use with other Auxiliary Hydraulic options, with the exception of Low Flow.2) Heavy duty bucket linkage is standard equipment on C/D series excavators.

$9,440.00



$7,217.00


$12,571.00

No Low Flow Circuit No ChargeSecondary Auxiliary HydraulicsSecondary Low Flow Auxiliary HydraulicsProvides low-flow for rotation or tilt hydraulic attachments.Not for use with Offset Boom option 461025Joystick Activated with Electronic Proportional ControlsNotes:1) May be used stand alone or with any Case Excavator Auxiliary Hydraulics option.

$9,285.00

CAB OPTIONS



$1,973.00


$2,324.00


$574.00

41 of 45

























































































October 11, 2019




SD_E5448 CATWALKXE5448X461553







$380.00


BUCKETS


No Charge

ADDITIONAL OPTIONS

No Catwalk No ChargeCatwalk - Left and Right Sides(Note: catwalk is not compliant with ISO standards)

$2,110.00


$2,909.00


$9,501.00



42 of 45


October 11, 2019



Case Pin-On Buckets

Direct Link Thumb


Case Coupler

















1,365 LB $11,840.00


1,425 LB $12,836.00


1,445 LB $12,280.00


1,505 LB $13,323.00


1,890 LB $15,080.00


1,950 LB $15,376.00


1,970 LB $15,320.00

47609126 Progressive Link Thumb Kit with Coupler use with bucket and coupler (4 tine)

2,030 LB $15,963.00

47848466 Multi-Fit S Hyd.Pin Grabber Coupler Kit 2,100 LB $9,567.00

43 of 45


October 11, 2019

Weight88,200 LBS


SD_E5311 BOOM461029



9560006




461024

461552




SD_E5448 CATWALKXE5448X461553







$2,754.00

BOOMS

Standard Long Reach Boom No ChargeARMS

7,60 M ARM No ChargeTRACK SHOES


No Charge


$680.00

LANGUAGE

English Literature No ChargeSpanish Literature No ChargeFrench Canadian Literature No Charge

ADDITIONAL EQUIPMENT CXCCAB OPTIONS



$1,973.00


$2,324.00

$2,110.00



$574.00


$380.00


BUCKETS

No Bucket No ChargeADDITIONAL OPTIONS

No Catwalk No ChargeCatwalk - Left and Right Sides(Note: catwalk is not compliant with ISO standards)

44 of 45


October 11, 2019





Description Weight Factory Data List Price84404166 24" Heavy-Duty Pin-On Bucket with 4 teeth (.50 cu. yd.) $3,997.00



Order Code



45 of 45

SINCE 1842

Mini Excavators

PM-18258 CASE CE 01/01/19 • MHEX-1

IndexMINI EXCAVATORS

Auger ............................................................................................................................................................. MHEX-2-4

Hydraulic Compactor .........................................................................................................................................MHEX-5

Hydraulic Hammer ........................................................................................................................................ MHEX-6-8

MHEX-2 • PM-18258 CASE CE 01/01/19

AugerMINI EXCAVATORS

Base Drive Unit packages include drive head, hoses and hydraulic quick disconnects. Must order mount bracket separately for specific excavator model, plus dipper quick disconnect kit and auger bits.

ADDITIONAL COMPONENTS (Cradle or pendulum mount and dipper quick disconnect kit required for complete unit)

PART NUMBER

WEIGHT LB

X975H200 AUGER DRIVE UNIT – 2" hex output shaft 87050963 168

X975R256 AUGER DRIVE UNIT – 2-9/16" round output shaft 87050964 168

X1475H200 AUGER DRIVE UNIT – 2" hex output shaft 87050965 170

X1475R256 AUGER DRIVE UNIT– 2-9/16" round output shaft 87050966 170

Quick Disconnect Kit (includes male and female quick disconnects for dipper shut-off )

Dipper Quick Disconnect kit (B-series and prior) 47451218 5

Dipper Quick Disconnect kit (C-series, stop valve connection) 48080817 5

Dipper Quick Disconnect kit (C-series, bulkhead connection) 48080818 5

Pendulum Mount Brackets

Pendulum Mount for CX14/CX17B/CX17C 87050968 57

Pendulum Mount for CX25/CX27B/CX26C/CX30C 87050969 57

Pendulum Mount for CX31/CX31B/CX36/CX36B, CX33C/CX37C 87050970 58

Pendulum Mount for CX47,CX50/CX50B,CX55B/CX57C/CX60C 87050971 61

Cradle Mount Brackets

Cradle Mount for CX14/CX17B/CX17C 48080864 93

Cradle Mount - Universal for all models (requires pin/bushing insert kit, mounting adapter or Klac adapter)

48080865 124

Pin/Bushing/Insert Kit for CX14/CX17B 47451172 45


Pin/Bushing/Insert Kit for CX31/CX36/CX31B/CX36B 47451174 45

Pin/Bushing/Insert Kit for CX47/CX50B/CX55B 47451175 45

Pin/Bushing/Insert Kit for CX17C 48058049 31

Pin/Bushing/Insert Kit for CX26C/CX30C 48058050 36


Pin/Bushing Kit for CX57C/CX60C (Direct pin-on only) 48120314 20

Mounting Adapter for CX57C/CX60C (Use with mech or hyd pin grabber coupler)

48058052 151

Klac Coupler adapter for CX14/CX17B/CX17C 47451195 161

Klac Coupler adapter for CX25/CX27B/CX26C/CX30C 47451196 176

Klac Coupler adapter for CX31/CX36/CX31B/CX36B/CX47/CX50B/CX55B/CX33C/CX37C/CX57C/CX60C

47451197 203

Auger Options (Continued next page)

Cradle Mount

Pendulum Mount

PM-18258 CASE CE 01/01/19 • MHEX-3


AUGER OPTIONS

HDF STYLE AUGERS PART NUMBER

WEIGHT LB2-9/16" Round Coupler

6" X 4' AUGER 9863606 409" X 4' AUGER 9863607 8612" X 4' AUGER 9863608 11515" X 4' AUGER 9863609 13618" X 4' AUGER 9863610 17624" X 4' AUGER 9863611 278

HDF STYLE AUGERS PART NUMBER

WEIGHT LB2" Hex Coupler


HDC STYLE AUGERS PART NUMBER



HDC STYLE AUGERS PART NUMBER



HTF STYLE AUGERS PART NUMBER


18" X 4' AUGER 9863642 14424" X 4' AUGER 9863643 198

HTF STYLE AUGERS PART NUMBER


18" X 4' AUGER 9863622 14424" X 4' AUGER 9863623 198

AUGER EXTENSIONS AND ADAPTERSPART

NUMBERWEIGHT

LB

2" HEX FEMALE TO 2-9/16" ROUND MALE 9863646 16

2-9/16" ROUND FEMALE TO 2" HEX MALE 9863647 15

12" EXTENSION, 2-9/16" ROUND 87042598 21

24" EXTENSION, 2-9/16" ROUND 87042600 39

12" EXTENSION, 2" HEX 87042601 20

24" EXTENSION, 2" HEX 87042602 32

48" EXTENSION, 2" HEX 84514060 57

Auger Options (Continued next page)

MHEX-4 • PM-18258 CASE CE 01/01/19


FEATURES• Hydraulic relief valve protects the units from damage when the

auger hits large obstruction• Extensions and adapters available• The heavy duty all gear design gives these units a long life with

minimal maintenance and service costs.• Drive units are completely sealed with all moving components

running in oil for total lubrication on a constant basis

APPLICATIONS• Fencing, construction, nursery and landscaping

REQUIREMENTS FOR OPERATION• Standard auxiliary hydraulics• Cradle mount or pendulum mount bracket• Dipper quick disconnect kit• Auger bit

HDC STYLE AUGERSFor difficult ground conditions, compacted soils, heavy clay, asphalt, frozen ground, fracturable rock

• HD cast boring head• Hardened, drive-in teeth• Hardened “fishtail” point• HD double flighting• 4’ overall length

HDF STYLE AUGERSFor light to moderate ground conditions

• Fabricated boring head• Hardened, bolt-on teeth• Hardened “fishtail” point• HD double flighting• 4’ overall length

HTF STYLE AUGERSFor tree and shrub planting

• Fabricated boring head• Two-diameter design• Hardened, bolt-on teeth• Hardened “fishtail” point• HD double flighting• 4’ overall length

SPECIFICATIONS

X975 X1475

Flow (gpm) 6-15 10-25

RPM @ max flow 92 96

Max torque @ max flow and pressure (ft-lb) 1500 2377

Planetary Gear Reduction 3.8:1 3.8:1

Max auger diameter 24" 24"

Output shaft2-9/16" Round 2-9/16" Round

2" Hex 2" Hex

Warranty - Gearbox 5 Years 5 Years

Warranty - Other, (non-wear) 1 Year 1 Year

MODEL COMPATIBILITYC

X17

C

CX

26C

C

X30

C

CX

33C

CX

37C

CX

57C

CX

60C REQ. EQUIPMENT

DIP

PE

R A

UX

MO

UN

T B

RA

CK

ET

DIP

PE

R Q

D K

IT

CX

14C

X17

B

CX

25C

X27

B

CX

31C

X31

B

CX

36C

X36

B

CX

47/C

X50

CX

50B

CX

55B

X975 AUGER DRIVE • • R R R

X1475 AUGER DRIVE • • • • • R R R

PM-18258 CASE CE 01/01/19 • MHEX-5

Hydraulic CompactorMINI EXCAVATORS

FEATURES• Direct-drive, heavy-duty gear motor• Rubber shock mounts• Box section base plate construction• Angled shock mount suspension• Thick formed base plate• Flow control to prevent over speeding• Virtually zero-maintenance oil bathed

bearings• Readily adaptable to other compact

excavator brands• 2 year limited warranty

APPLICATIONS• Utilities, construction, road maintenance• Ideal for slope compaction

REQUIREMENTS FOR OPERATION• Uni- or bi-directional auxiliary

hydraulics• Pin/bushing/insert kit,

mounting adapter or Klac adapter for specific model

• Dipper quick disconnect kit

Unit includes compactor unit, hoses and quick disconnects.

PART NUMBER

WEIGHT LB

SC-30T HYDRAULIC COMPACTOR 47808593 450

ADDITIONAL COMPONENTS (Pin/bushing/insert kit or mount adapter and quick disconnect kit required for complete unit)

Quick Disconnect Kit (includes male and female quick disconnects for dipper)




Pin and Bushing Kits


Pin/Bushing/Insert Kit for CX47/CX50B/CX55B 47451175 45




48058052 151

Klac Coupler adapters (Pin and Bushing kits not required for these applications)

Klac Coupler adapter for CX31/CX36/CX31B/CX36B/CX47/CX50/CX50B/CX55B/CX33C/CX37C/CX57C/CX60C

47451197 203

MODEL COMPATIBILITY

CX

17C

CX

26C

C

X30

C

CX

33C

C

X37

C

CX

57X

C

X60

C REQ. EQUIPMENT

DIP

PE

R

AU

X

MO

UN

T

BR

AC

KE

T

DIP

PE

R

QD

KIT

CX

14C

X17

B

CX

25C

X27

B

CX

31C

X31

BC

X36

CX

36B

CX

47

CX

50C

X50

B

CX

55B

SC-30T HYDRAULIC COMPACTOR • • R R R

SPECIFICATIONSSC-30T

Impulse force 3,400 lbs (1540 kg)Cycles per min. 2100Operating weight 400 lbs (181 kg)Base plate size 19 x 20 in (483 x 508 mm)Input flow 10-25 gpm (38-95 l/min)Operating Pressure 1500-2100 psi (103-145 bar)

MHEX-6 • PM-18258 CASE CE 01/01/19

Hydraulic HammerMINI EXCAVATORS

CH-3M shown

Unit includes hammer body, hoses, quick disconnects, side plates and moil point.

ADDITIONAL COMPONENTS (Pin/bushing and quick disconnect kits required for complete unit)

ADDITIONAL COMPONENTS for CH-1M (Order as needed)


PART NUMBER

WEIGHT LB

CH-1M HYDRAULIC HAMMER (includes pins) 47451184 237

CH-2M HYDRAULIC HAMMER 47451185 347




Quick Disconnect Kit (includes male and female quick disconnects for dipper connection)




Pin and Bushing Kits

Pin/Bushing/Insert Kit for CX14/CX17B (use for CH-2M only) 47451172 45



Pin/Bushing/Insert Kit for CX47/CX50B/CX55BX 47451175 45

Pin/Bushing/Insert Kit for CX17C (use for CH-2M only) 48058049 31





48058052 151

Klac Coupler adapters (Pin and Bushing kits not required for these applications)

Klac Coupler adapter for CX14/CX17B/CX17C (use for CH-2M only) 47451195 161

Klac Coupler adapter for CX25/CX27B/CX26C/CX30C 47451196 176

Klac Coupler adapter for CX31/CX36/CX31B/CX36B/CX47/CX50B/CX55BX/CX33C/CX37C/CX57C/CX60C

47451197 203

Lubrication System (Optional)

Auto Lube Kit - fits CH-1M to CH-5M 47766709 9

Moil Point (1 included with base hammer) 47451178 13

Chisel Point 47451179 13

Blunt Point 47451180 13




Frost Wedge (2.0" wide) 47451010 22

Asphalt Cutter (6" wide) 47451011 36

Tamping pad (8" X 8") 47451012 43

Hydraulic Hammers (Continued next page)

PM-18258 CASE CE 01/01/19 • MHEX-7







Tamping pad (12" X 12") 47451042 130







Tamping pad (12" X 12") 47451031 126








Tamping pad (12" X 12") 47451024 119

SPECIFICATIONSCH-1M CH-2M CH-3M CH-4M CH-5M

Impact class (ft-lb) 150 250 350 550 825Blows per min. 930-1300 600-1150 550-1000 580-1060 550-1000Operating wt. – lbs. (kg)

240 (109)

348 (158)

502 (228)

561 (273)

733 (332)

Tool diam. – in. (mm)

1.8 (45)

2.0 (51)

2.3 (58)

2.5 (64)

3.0 (76)

Input flow – gpm (l/min)

5.3-7.9 (20-30)

5.3-9.2 (20-35)

6.6-12 (25-45)

8-14.5 (30-55)

9.2-16 (35-61)

MODEL COMPATIBILITY

CX

17C

CX

26C

C

X30

C

CX

33C

C

X37

C

CX

57C

C

X60

C REQ. EQUIPMENT

DIP

PE

R A

UX

PIN

/BU

SH

ING

K

IT O

R K

LAC

A

DA

PT

ER

QD

KIT

CX

14C

X17

B

CX

25C

X27

B

CX

31

CX

31B

CX

36

CX

36B

CX

47

CX

50C

X50

B

CX

55B

CH-1M HYDRAULIC HAMMER • R R RCH-2M HYDRAULIC HAMMER • • R R RCH-3M HYDRAULIC HAMMER • • • R R RCH-4M HYDRAULIC HAMMER • • R R RCH-5M HYDRAULIC HAMMER • R R R

MHEX-8 • PM-18258 CASE CE 01/01/19

CX17C

Dipp

er Q

D Ki

t 48

0808

17 o

r 480

8081

8

CH-1M47451184

Optional points

Pin/Bushing/Insert kit48058049

orKLAC Adapter

47451195

CX26C CX30C


orKLAC Adapter

47451196

CH-2M47451185

Optional points

CX33CCX37C


orKLAC Adapter

47451197

CH-3M47451186

Optional points

CX57CCX60C

Pin/Bushing kit48120314 (Direct fit only) or

Mounting Adapter48058052 (mech or

hyd pin grabber coupler) orKLAC Adapter

47451197 (Klac coupler)

CH-4M47451187

Optional points

CH-5M47451188

Optional points


FEATURES• Only 2 moving parts (piston

and control valve) means less maintenance

• Will not dry-fire• Low pressure gas charge• Low recoil• Low hydraulic surge• Dual tool retainer pins• Hoses and quick

disconnects included• Moil Point included• Gas recharge kit included• Operation/Service Parts Manual• 3 Year Warranty

APPLICATIONS• Demolition, construction,

utilities, road maintenance

REQUIREMENTS FOR OPERATION• Standard auxiliary hydraulics• Pin/bushing/insert kit,

mounting adapter or Klacadapter for specific model

• Dipper quick disconnect kit

HAMMER ORDERING GUIDE

Base Unit Model DipperQD Kit

Pin/Bushing/Insert kit or KLAC Adapter Hammer Model Points

CX14CX17B

Dipp

er Q

D Ki

t 47

4512

18

CH-1M47451184

Optional points

Pin/Bushing/Insert kit 47451172 orKLAC Adapter

47451195

CX25CX27B


47451196

CH-2M47451185

Optional points

CX31CX31B CX36

CX36B


47451197

CH-3M47451186

Optional points

CX47CX50

CX50BCX55B

Pin/Bushing/Insert kit 47451175orKLAC Adapter

47451197

CH-4M47451187

Optional points

CH-5M47451188

Optional points

SINCE 1842

Excavators

PM-18258 CASE CE 01/01/19 • EX-1

IndexEXCAVATORS

Guard Kit, Front Window ....................................................................................................................................... EX-2

Hydraulic Compactor ............................................................................................................................................. EX-3

Hydraulic Hammer .............................................................................................................................................. EX-4-6

Hammer Ordering Guide ........................................................................................................................................ EX-7

EX-2 • PM-18258 CASE CE 01/01/19

Guard Kits, Front WindowEXCAVATORS

Complete kit includes frame, guard and mounting hardware.

PART NUMBER

WEIGHT LB

FRONT WINDOW GUARD, STEEL MESH – SR MODELS 51427322 305

FRONT WINDOW GUARD, LEXAN – SR MODELS 51427323 340

FRONT WINDOW GUARD, STEEL MESH 51427324 310

FRONT WINDOW GUARD, LEXAN 51427325 345

MODEL COMPATIBILITY

CX

75C

SR

CX

80C

CX

145C

/D S

R

CX

130C

/D

CX

160C

/D

CX

210C

/D

CX

235C

SR

CX

245D

SR

CX

250C

/D

CX

300C

/D

CX

350C

/D

CX

470C

C

X49

0D

REQ’D EQUIPMENT

AU

X H

YD

HO

SE

KIT

TO

P C

AP

FRONT WINDOW GUARD, STEEL MESH – SR MODELS – 51427322 • • •

FRONT WINDOW GUARD, LEXAN – SR MODELS — 51427323 • • •

FRONT WINDOW GUARD, STEEL MESH — 51427324 • • • • • • •

FRONT WINDOW GUARD, LEXAN — 51427325 • • • • • • •

FEATURES• Provides additional layer of protection for

the front window from flying debris• Tubular frame for added strength• Bolt on design for quick and easy installation

(average installation time: two hours)• 6" spacer to allow easy access to the windshield• Welded tabs for added strength• High strength 10.8 class bolts• Crimped woven mesh gives you longer life

(¼" wire, 2" x 2" mesh)• LEXAN sheet versions available for

added protection (½" thick)• Steel components are powder coated

to protect from corrosion• Includes detailed installation instructions

and drawings• One year/2,000 hour warranty• Window guards are intended to protect

window/glass, and are not certifiedROPS guards; and do not meetOSHA Level 2 standards

APPLICATIONS• Construction• Demolition• Land clearing/maintenance

Steel Mesh

Lexan

PM-18258 CASE CE 01/01/19 • EX-3

Hydraulic CompactorsEXCAVATORS

Unit includes compactor unit and hoses.

PART NUMBER

WEIGHT LB

SC-60 HYDRAULIC COMPACTOR 47808607 900




ADDITIONAL COMPONENTS (Top cap required for complete unit)TOP CAP – CX75C SR, CX80C 47808620 254TOP CAP – CX130C/D, CX145C/D SR 47808621 409TOP CAP – CX160C/D 47808622 453TOP CAP – CX210C/D, CX235C SR, CX245D SR 47808624 631TOP CAP – CX250C/D 47808625 744TOP CAP – CX300C/D 47808629 811TOP CAP – CX350C/D 47808631 1054

MODEL COMPATIBILITY

CX

75C

SR

CX

80C

CX

130C

/DC

X14

5C/D

SR

CX

160C

/D

CX

210C

/D

CX

235C

SR

C

X24

5D S

R

CX

250C

/D

CX

300C

/D

CX

350C

/D

CX

470C

C

X49

0D

REQ’D EQUIPMENT

AU

X H

YD

HO

SE

KIT

TO

P C

AP

SC-60 HYDRAULIC COMPACTOR • R R

SC-80 HYDRAULIC COMPACTOR • • R R

SC-110 HYDRAULIC COMPACTOR • • • R R

SC-220 HYDRAULIC COMPACTOR • • R R

FEATURES• Direct-drive, heavy-duty gear motor• Rubber shock mounts• Box section base plate construction• Angled shock mount suspension• Thick formed base plate• Flow control to prevent over speeding• Virtually zero-maintenance oil bathed bearings• Readily adaptable to other excavator brands• 2 year limited warranty

APPLICATIONS• Utilities, construction, road maintenance• Ideal for slope compaction

REQUIREMENTS FOR OPERATION• Auxiliary hydraulics• Top cap

SPECIFICATIONS

SC-60 SC-80 SC-110 SC-220Impulse force (lb) 6400 8000 11350 22000Impulse force (kg) 2900 3630 5150 9980Cycles per min. 2100 2100 2100 2100Operating wt. (lbs) 850 975 1425 2200Operating wt. (kg) 386 442 646 998Base plate size (in) 24 x 26 24 x 34 27 x 30 32 x 42Base plate size (mm) 610 x 660 610 x 864 686 x 762 813 x 1067Input flow (gpm) 12-25 18-40 28-60 42-70Input flow (l/m) 45-95 68-151 106-227 159-265Operating Pressure (psi) 1700-2100 1700-2100 1800-2200 1800-2200Operating Pressure (bar) 117-145 117-145 124-152 124-152

EX-4 • PM-18258 CASE CE 01/01/19

Hydraulic HammerEXCAVATORS

HAMMER COMPONENTS (Unit includes hammer body and point as indicated)

Complete hammer package includes hammer body, standard point, top cap and hose kit for models as indicated.

PART NUMBER

WEIGHT LB

CH-6E HYDRAULIC HAMMER (includes moil point) 47575652 832

CH-7J HYDRAULIC HAMMER (includes chisel point) 47922307 2157

CH-100 HYDRAULIC HAMMER (includes chisel point) 47575660 2421





PART NUMBER

WEIGHT LB

CH-6E HYDRAULIC HAMMER (CX75C SR, CX80C) 47999864 1103

CH-7J HYDRAULIC HAMMER (CX130C/D, CX145C/D SR) 47999871 2583

CH-100 HYDRAULIC HAMMER (CX160C/D) 47999873 2891

CH-151 HYDRAULIC HAMMER (CX210C/D, CX235C SR, CX245D SR) 47999874 4042

CH-190 HYDRAULIC HAMMER (CX235C SR, CX245D SR) 47999875 5018





CH-310 HYDRAULIC HAMMER (CX470C, CX490D) 47999879 8168

CH-310 HYDRAULIC HAMMER (CX470C ME, CX500D ME) 51571343 8315

ADDITIONAL COMPONENTS (Hose kit and top cap required for complete unit)HOSE KITS HOSE KIT – CX75C SR, CX80C, CX130C/D, CX145C/D SR 47575770 17HOSE KIT – CX160C/D 47575779 17HOSE KIT – CX210C/D, CX235C SR, CX245D SR, CX250C/D 47575780 35HOSE KIT – CX300C/D, CX350C/D 47575781 39HOSE KIT – CX470C, CX490D 47600075 48TOP CAPSTOP CAP – CH-6E (CX75C,SR, CX80C) 47575722 254TOP CAP – CH-7J (CX130C/D, CX145C/D SR) 47922308 409TOP CAP – CH-100 (CX160C/D) 47575739 453TOP CAP – CH-151 (CX210C/D, CX235C SR, CX245D SR) 47575740 532TOP CAP – CH-190 (CX235C SR, CX245D SR) 47575741 631TOP CAP – CH-190 (CX250C/D, CX300C/D) 47575742 744TOP CAP – CH-230 (CX300C/D) 47575743 811TOP CAP – CH-230 (CX350C/D) 47575744 1054TOP CAP – CH-310 (CX470C, CX490D) 47575745 1380TOP CAP – CH-310 (CX470C ME, CX500D ME) 51571342 1527LUBRICATION SYSTEMSAuto Lube Kit - fits CH-6E to CH-310 47766712 12Auto Lube Shield Kit - fits CH-6E to CH-310 (use with 47766712) 47766713 5


PM-18258 CASE CE 01/01/19 • EX-5


MODEL COMPATIBILITY

CX

75C

SR

CX

80C

CX

130C

/DC

X14

5C/D

SR

CX

160C

/D

CX

210C

/D

CX

235C

SR

C

X24

5D S

R

CX

250C

/D

CX

300C

/D

CX

350C

/D

CX

470C

C

X49

0D

CX

470C

ME

CX

500D

ME

REQ’D EQUIPMENT

AU

X H

YD

HO

SE

KIT

TO

P C

AP

CH-6E HYDRAULIC HAMMER • R R R

CH-7J HYDRAULIC HAMMER • R R R

CH-100 HYDRAULIC HAMMER • R R R

CH-151 HYDRAULIC HAMMER • • R R R

CH-190 HYDRAULIC HAMMER • • • R R R



ADDITIONAL COMPONENTS for CH-190 (Order as needed)



Moil Point 47575882 275Chisel Point (1 included with base hammer) 47575883 284Blunt Point 47575884 275




ADDITIONAL COMPONENTS for CH-6E (Order as needed)

ADDITIONAL COMPONENTS for CH-7J (Order as needed)


PART NUMBER

WEIGHT LB

Moil Point (1 included with base hammer) 47575854 82Chisel Point 47575855 86Blunt Point 47575856 90



ADDITIONAL COMPONENTS for CH-151 (Order as needed)Moil Point 47575876 254Chisel Point (1 included with base hammer) 47575877 262Blunt Point 47575879 271

EX-6 • PM-18258 CASE CE 01/01/19


FEATURES• Only 2 moving parts (piston and control valve) means less maintenance• Will not dry-fire• Low pressure gas charge• Low recoil• Low hydraulic surge• Dual tool retainer pins• Point included• Gas recharge kit included• Operation/Service Parts Manual• 3 Year Warranty (CH-310 – 1 year)

APPLICATIONS• Demolition, construction, road maintenance, quarry applications

REQUIREMENTS FOR OPERATION• Auxiliary hydraulics• Hose kit and top cap for specific model

CH-151 shown

SPECIFICATIONS

CH-6E CH-7J CH-100 CH-151 CH-190 CH-230 CH-310

Impact class – ft-lb (Nm)

1500(2034)

2000(2712)

3000(4067)

4500(6101)

5500(7457)

7500(10169)

10000(13558)

Blows per min. 550-1000 450-720 430-600 490-630 370-490 380-450 370-470

Operating wt. – lbs (kg)

990 (449)

2420 (1098)

2728 (1237)

3861 (1751)

4950 (2245)

5940 (2694)

7920 (3592)

Tool diam. – in (mm)

3.7 (94)

4.1(105)

4.5(114)

5.3(135)

5.5(140)

5.8(146)

6.3(160)

Input flow – gpm (l/min)

12-21 (45-80)

21-32 (80-120)

26 -37 (100-140)

42-52.8 (160-200)

42-55.5 (160-210)

48-60.8 (180-230)

63-80 (240-303)


PM-18258 CASE CE 01/01/19 • EX-7

CX75C SR

CX80C

CX130C/D

CX145C SR

CX160C/D

CX210C/D

CX210C/D LR

CX235C SR

CX250C/D

CX250C/DLR

CX300C/D

CX350C/D

CX470C

47575652CH-6E

47575660CH-100

47575667CH-151

CX700B

CX800B

47575722Top Cap

47575770Hose kit

47922308Top Cap

47575770Hose kit

47575740Top Cap

47575780Hose kit

47575742Top Cap

47575779Hose kit

47575744Top Cap

47575745Top Cap

47600075Hose kit

47922307CH-7J

47575855Chisel

47575739Top Cap

47575854Moil (incl)

No hammeroffered

No hammer offered

47575856Blunt

47922310Chisel (incl)

47922311Blunt

47922309Moil


47575873Blunt

47575871Moil


47575879Blunt

47575876Moil

47575671CH-190


47575884Blunt

47575882Moil

47575675CH-230


47575887Blunt

47575885Moil

47575743Top Cap

47575676CH-310


47575893Blunt

47575890Moil

47575781Hose kit

47575781Hose kit

47575780Hose kit

47575741Top Cap

47575780Hose kit


HAMMER ORDERING GUIDE

BASE UNIT MODEL HOSE KIT TOP CAP HAMMER MODEL POINTS

CX75C SR

CX80C

CX130C/D

CX145C SR

CX160C/D

CX210C/D

CX210C/D LR

CX235C SR

CX250C/D

CX250C/DLR

CX300C/D

CX350C/D

CX470C

47575652 CH-6E

47575660 CH-100

47575667 CH-151

CX700B

CX800B

47575722 Top Cap

47575770 Hose kit

47922308Top Cap

47575770 Hose kit

47575740 Top Cap

47575780 Hose kit

47575742 Top Cap

47575779 Hose kit

47575744 Top Cap

47575745 Top Cap

47600075 Hose kit

47922307 CH-7J

47575855Chisel

47575739 Top Cap

47575854Moil (incl)

No hammer offered

No hammeroffered

47575856Blunt

47922310 Chisel (incl)

47922311Blunt

47922309 Moil


47575873Blunt

47575871Moil


47575879Blunt

47575876Moil

47575671 CH-190


47575884Blunt

47575882Moil

47575675 CH-230


47575887Blunt

47575885Moil

47575743 Top Cap

47575676 CH-310


47575893 Blunt

47575890Moil

47575781 Hose kit

47575781 Hose kit

47575780 Hose kit

47575741 Top Cap

47575780 Hose kit

CX470C, CX490D

CX145C/D SR

CX235C SRCX245D SR

CX470C ME, CX500D ME

47600075 Hose Kit

51571342 Top Cap

CX700B, CX800B, CX750D, CX750D ME

CX210C/D LR, CX250C/D LR,CX350D LR

PART NUMBER PART DESCRIPTION LIST PRICE

9863606 AUGER 6"X4' 256 RD- HDF 270.00$ 9863607 AUGER 9"X4' 256 RD- HDF 390.00$ 9863608 AUGER 12"X4' 256 RD- HDF 460.00$ 9863609 AUGER 15"X4' 256 RD- HDF 590.00$ 9863610 AUGER 18"X4' 256 RD- HDF 750.00$ 9863611 AUGER 24"X4' 256 RD- HDF 910.00$ 9863614 AUGER 6"X4' 256 RD- HDC 400.00$ 9863615 AUGER 9"X4' 256 RD- HDC 600.00$ 9863616 AUGER 12"X4' 256 RD- HDC 640.00$ 9863617 AUGER 15"X4' 256 RD- HDC 810.00$ 9863618 AUGER 18"X4' 256 RD- HDC 940.00$ 9863619 AUGER 24"X4' 256 RD- HDC 1,380.00$ 9863622 AUGER 18"X4' 256 RD- HTF 650.00$ 9863623 AUGER 24"X4' 256 RD- HTF 680.00$ 9863626 AUGER 6"X4' 200 HEX- HDF 270.00$ 9863627 AUGER 9"X4' 200 HEX- HDF 390.00$ 9863628 AUGER 12"X4' 200 HEX- HDF 460.00$ 9863629 AUGER 15"X4' 200 HEX- HDF 590.00$ 9863630 AUGER 18"X4' 200 HEX- HDF 750.00$ 9863631 AUGER 24"X4' 200 HEX- HDF 910.00$ 9863634 AUGER 6"X4' 200 HEX- HDC 400.00$ 9863635 AUGER 9"X4' 200 HEX- HDC 600.00$ 9863636 AUGER 12"X4' 200 HEX- HDC 640.00$ 9863637 AUGER 15"X4' 200 HEX- HDC 810.00$ 9863638 AUGER 18"X4' 200 HEX- HDC 940.00$ 9863639 AUGER 24"X4' 200 HEX- HDC 1,380.00$ 9863642 AUGER 18"X4' 200 HEX- HTF 650.00$ 9863643 AUGER 24"X4' 200 HEX- HTF 680.00$ 9863646 ADAPTER- 2 HEX F TO 256 RD M 230.00$ 9863647 ADAPTER- 256 RD F TO 2 HEX M 150.00$ 47451007 WORKING STEEL 195.00$ 47451008 TOOL- CHISEL POINT-2M 195.00$ 47451009 TOOL- BLUNT POINT-2M 195.00$ 47451010 TOOL- FROST WEDGE-2M 900.00$ 47451011 TOOL- ASPHALT CUTTER-2M 950.00$ 47451012 TOOL- TAMPING PAD-2M 1,245.00$ 47451018 WORKING STEEL 325.00$ 47451019 WORKING STEEL 325.00$ 47451021 TOOL- BLUNT POINT-3M 325.00$ 47451022 WORKING STEEL 955.00$ 47451023 TOOL- ASPHALT CUTTER-3M 980.00$ 47451024 TOOL- TAMPING PAD-3M 1,759.00$ 47451026 WORKING STEEL 400.00$ 47451027 WORKING STEEL 400.00$ 47451028 TOOL- BLUNT POINT-4M 400.00$ 47451029 TOOL- FROST WEDGE-4M 1,000.00$ 47451030 WORKING STEEL 1,040.00$ 47451031 WORKING STEEL 1,759.00$ 47451037 WORKING STEEL 450.00$ 47451039 WORKING STEEL 450.00$ 47451040 TOOL- BLUNT POINT 5M-6M 450.00$ 47451041 WORKING STEEL 1,500.00$ 47451042 WORKING STEEL 1,995.00$ 47451172 MX PIN AND BUSHING KIT 650.00$


47451173 MX PIN AND BUSHING KIT 650.00$ 47451174 MX PIN AND BUSHING KIT 650.00$ 47451175 MX PIN AND BUSHING KIT 650.00$ 47451178 TOOL- MOIL POINT-1M 215.00$ 47451179 TOOL- CHISEL POINT-1M 215.00$ 47451180 WORKING STEEL 215.00$ 47451184 HYDRAULIC HAMMER 5,775.00$ 47451185 HYDRAULIC HAMMER 6,250.00$ 47451186 HYDRAULIC HAMMER 8,400.00$ 47451187 HYDRAULIC HAMMER 9,500.00$ 47451188 HYDRAULIC HAMMER 12,750.00$ 47451195 KIT- ADAPTER- KLAC - CNH17.18 727.00$ 47451196 KIT- ADAPTER- KLAC - CNH27 805.00$ 47451197 ADAPTR KLAC-CNH31.35.36.50.55 965.00$ 47575652 HAMMER- HYD- CH-6E 18,005.00$ 47575660 HAMMER- HYD- CH-100 41,380.00$ 47575667 HAMMER- HYD- CH-151 53,795.00$ 47575671 HAMMER- HYD- CH-190 61,445.00$ 47575675 HAMMER- HYD- CH-230 77,765.00$ 47575676 HAMMER- HYD- CH-310 108,410.00$ 47575722 BRACKET- HAMMER TOP CAP 2,600.00$ 47575739 BRACKET- HAMMER TOP CAP 3,200.00$ 47575740 BRACKET- HAMMER TOP CAP 3,105.00$ 47575741 BRACKET- HAMMER TOP CAP 3,667.00$ 47575742 BRACKET- HAMMER TOP CAP 3,667.00$ 47575743 BRACKET- HAMMER TOP CAP 4,042.00$ 47575744 BRACKET- HAMMER TOP CAP 4,042.00$ 47575745 BRACKET- HAMMER TOP CAP 4,667.00$ 47575770 KIT- HOSE- 6E/7E 395.00$ 47575779 KIT- HOSE- CH-100 420.00$ 47575780 KIT- HOSE- CH-141/151/190 678.00$ 47575781 KIT- HOSE- CH-230/310 935.00$ 47575854 TOOL- MOIL POINT - 6E 595.00$ 47575855 TOOL- CHISEL POINT - 6E 595.00$ 47575856 TOOL- BLUNT POINT - 6E 595.00$ 47575871 TOOL- MOIL POINT - CH-100 1,350.00$ 47575872 TOOL- CHISEL POINT - CH-100 1,350.00$ 47575873 TOOL- BLUNT POINT - CH-100 1,350.00$ 47575876 TOOL- MOIL POINT - CH-141/151 1,450.00$ 47575877 TOOL-CHISEL POINT - CH-141/151 1,450.00$ 47575879 TOOL-BLUNT POINT - CH-141/151 1,450.00$ 47575882 TOOL- MOIL POINT - CH-190 1,825.00$ 47575883 TOOL- CHISEL POINT - CH-190 1,825.00$ 47575884 TOOL- BLUNT POINT - CH-190 1,825.00$ 47575885 TOOL- MOIL POINT - CH-230 2,195.00$ 47575886 TOOL- CHISEL POINT - CH-230 2,195.00$ 47575887 TOOL- BLUNT POINT - CH-230 2,195.00$ 47575890 TOOL- MOIL POINT - CH-310 2,625.00$ 47575891 TOOL- CHISEL POINT - CH-310 2,625.00$ 47575893 TOOL- BLUNT POINT - CH-310 2,625.00$ 47600075 KIT- HOSE- CH-310 1,417.00$ 47766709 AUTO LUBE- 1M-6M HAMMER 1,525.00$ 47766712 KIT- AUTO LUBE- 6E-310 HAMMER 2,650.00$ 47766713 SHEILD KIT-AUTO LUBE-6E-310HAM 650.00$


47808593 COMPACTOR- SC30T - CC MHEX 5,790.00$ 47808607 COMPACTOR- SC60 - CASE CX75-80 6,450.00$ 47808614 COMPACTOR SC80-CHEX CX130-160 7,290.00$ 47808615 COMPACTOR SC110-CHEX CX210-250 9,050.00$ 47808620 TOP CAP - SC60 (CX75-80) 1,695.00$ 47808621 TOP CAP - SC80 (CX130-145) 2,800.00$ 47808622 TOP CAP - SC80 (CX160) 2,800.00$ 47808624 TOP CAP - SC110 (CX210-235) 3,400.00$ 47808625 TOP CAP - SC110 (CX250) 3,400.00$ 47808629 TOP CAP - SC220 (CX300) 3,900.00$ 47808631 TOP CAP - SC220 (CX350) 3,900.00$ 47922307 HAMMER- CH-7J - CASE CHEX 29,255.00$ 47922308 TOP CAP - CH-7J 3,100.00$ 47922309 TOOL- MOIL CH-7J 1,150.00$ 47922310 TOOL- CHISEL CH-7J 1,150.00$ 47922311 TOOL- BLUNT CH-7J (HYD HAMMER) 1,150.00$ 47999864 CH-6E CMPLTE PKG FOR CX75C SR 21,000.00$ 47999871 CH-7J CMPLETE PKG FOR CX130C/D 32,750.00$ 47999873 CH-100 CMPLTE PKG FOR CX160C/D 45,000.00$ 47999874 CH-151 CMPLTE PKG FOR CX210C/D 58,000.00$ 47999875 CH-190 CMPLT PKG FOR CX235C-CP 66,500.00$ 47999876 CH-190 CMPLT PKG FOR CX250C-CP 66,500.00$ 47999877 CH-230 CMPLTE PKG FOR CX300C/D 83,000.00$ 47999878 CH-230 CMPLTE PKG FOR CX350C/D 83,000.00$ 47999879 CH-310 CMPLETE PKG FOR CX470C 115,000.00$ 48058049 KIT- PIN/BUSHING/INSERT 650.00$ 48058050 PIN/BUSHING KIT 650.00$ 48058051 IT- PIN/BUSHING/INSERT 650.00$ 48058052 KIT- MOUNT ADAPTER 1,788.00$ 48080864 KIT- AUGER MT- CRADLE 650.00$ 48080865 KIT- AUGER MT- CRADLE - UNIVER 650.00$ 51427322 KIT- FRT WINDOW GRD STEEL MESH 2,082.00$ 51427323 KIT- FRT WINDOW GRD- LEXAN 3,111.00$ 51427324 KIT- FRT WINDOW GRD STEEL MESH 2,082.00$ 51427325 KIT- FRT WINDOW GRD- LEXAN 3,111.00$ 51499028 CH-190 COMPLETE PKG FOR CX300C 66,680.00$ 51571342 TOP CAP - CH-310/CX500D ME 5,995.00$ 51571343 CH-310 COMPLETE PKG FOR CX500D ME 115,000.00$ 84514060 EXTENSION- AUGER H200 X 48" 270.00$ 87042598 AUGER EXTENSION- 12X256 RD 150.00$ 87042600 AUGER EXTENSION- 24X256 RD 200.00$ 87042601 AUGER EXTENSION- 12X2 HEX 190.00$ 87042602 AUGER EXTENSION- 24X2 HEX 220.00$ 87050963 AUGER DRIVE- X975H200 2,180.00$ 87050964 AUGER DRIVE- X975R256 2,230.00$ 87050965 AUGER DRIVE- X1475H200 2,060.00$ 87050966 AUGER DRIVE- X1475R256 2,060.00$ 87050968 PENDULUM MOUNT 610.00$ 87050969 PENDULUM MOUNT 610.00$ 87050970 PENDULUM MOUNT 390.00$ 87050971 PENDULUM MOUNT 460.00$

PRICE LIST

Fx-a Series Small Series Hydraulic Breakers

Effective Date: January 01, 2019

Energy Class Model Description List Price $

150 Ft Lb Fx15a Mono-Body Breaker designed for select Mini-Excavators

6,000.00 • Available in configuration: FB

Extra standard Working Steel (Moil point or Chisel or Blunt available) 225.00 Extra Mounting Hardware Set (Pins & Bushings) 395.00

275 Ft Lb Fx25a Mono-Body Breaker designed for select Mini-Excavators

7,140.00 • Available in configuration: FB ME FSP

Extra standard Working Steel (Moil point or Chisel or Blunt available) 275.00 Extra Mounting Hardware Set (Pins & Bushings) 395.00 Dingo Bracket and Mounting Hardware 1,175.00

375 Ft Lb Fx35a

Mono-Body Breaker designed for Mini-Excavators

•Available in configuration: CP FB FSP ME SS WB 8,600.00

Fx35aQT Mono-Body Breaker in a “Low Noise” Case with Top Cap for select Mini-Excavators 9,150.00 Extra standard Working Steel (Moil or Chisel or Blunt) 325.00 Extra Mounting Hardware Set (Pins & Bushings) – for a Universal Top Cap 525.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 1,675.00 Optional 2-Position Skid-Steer Bracket for ME, FSP, WB or QT configuration (in some instances, extra mtg req) 1,700.00 Dingo Bracket and Mounting Hardware 1,175.00

550 Ft Lb

Fx45a Mono-Body Breaker designed for select Mini-Excavators & Backhoes

•Available in configuration: CP FB FSP ME SS WB WB5010,880.00

Fx45aQT Mono-Body Breaker in a “Low Noise” Case with Top Cap for select Mini-Excavators 11.650.00 Extra standard Working Steel (Moil or Chisel or Blunt) 350.00 Extra Mounting Hardware Set (Pins & Bushings) – for a Universal Top Cap 575.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 1,675.00 Optional 2-Position Skid-Steer Bracket for ME, FSP, WB or QT configuration (in some instances, extra mtg req) 1,700.00

800 Ft Lb

Fx55a Mono-Body Breaker designed for Mini-Excavators & Backhoes

•Available in configuration: CP FB FSP ME SS WB WB5013,250.00

Fx55aQT Mono-Body Breaker in a “Low Noise” Case with Top Cap for select Mini-Excavators 14,230.00 Extra standard Working Steel (Moil or Chisel or Blunt) 450.00 Extra Mounting Hardware Set (Pins & Bushings) – for a Universal Top Cap 575.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 1,675.00 Optional 2-Position Skid-Steer Bracket for ME, FSP, WB or QT configuration (in some instances, extra mtg req) 1,700.00

PRICE LIST

Models F6, F9, Fx125 Medium Series Hydraulic Breakers



1,000 Ft Lb F6

Hydraulic Breaker designed for select Mini-Excavators and Backhoes

•Available in configuration: FSP ME TLB SS 15,370.00

F6Qt Hydraulic Breaker in a “Low Noise” Case with Top Cap for select Mini-Exc and Backhoes 16,600.00 Extra standard Working Steel (Moil point or Chisel or Blunt available) 535.00 Extra Mounting Hardware Set (Pins & Bushings) 575.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 1,800.00

1,500 Ft Lb F9

Hydraulic Breaker designed for select Mini-Excavators and Backhoes

•Available in configuration: FSP TLB 22,760.00

F9QT Hydraulic Breaker in a “Low Noise” Case with Top Cap for select Mini-Exc and Backhoes 24,450.00 Extra standard Working Steel (Moil or Chisel or Blunt) 700.00 Extra Mounting Hardware Set (Pins & Bushings) 575.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 2,275.00

2,000 Ft Lb

Fx125 TLB Mono-Body Breaker assembled in TLB Side Plates for select Mini-Excavators 26,800.00

Fx125 Qtv Mono-Body Breaker assembled in a “Low Noise” Case with Top Cap for select Mini-Excavators 29,900.00 Extra standard Working Steel (Moil or Chisel or Blunt) 950.00 Extra Mounting Hardware Set (Pins & Bushings) – for a Universal Top Cap 1,075.00 Additional Top Cap with Mounting for Breaker using FSP or QT configuration 2,825.00

FSP Breaker assembled in full length, flanged side plates & includes: a top cap, all mounting, (2) hose whips and (1) st’d working steel (moil, chisel, or blunt)

ME Breaker assembled in full length side plates expressly for mini-exc. & includes: (2) hose whips, all mtg, and (1) st’d working steel (moil, chisel, or blunt)

Qt/Qtv Breaker assembled in a full length & protective, low noise case, includes: a top cap, mounting, (2) hose whips & (1) st’d working steel (moil, chisel, or blunt) D

esc r

ipti

on

of

Co

nfi

gura

tio

ns

PRICE LIST

Fx Series Large Hydraulic Breakers for 13 to 61 Ton Excavators



3,250 Ft Lb Fx175 Mono-Body Breaker encased in a Qtv Cradle, complete with Top Cap, required Mounting and (1) standard Working Steel (Moil or Chisel or Blunt Style) 38,150.00

Extra standard Working Steel (Moil point or Chisel or Blunt available) 1,350.00 Extra Mounting Hardware Set (Pins & Bushings) 1,700.00 Additional Top Cap (with 13” between centers) with Pins ~ for the Qtv Cradle 3,400.00


Extra standard Working Steel (Moil point or Chisel or Blunt available) 1,675.00 Extra Mounting Hardware Set (Pins & Bushings) 1,700.00 Additional Top Cap with Pins ~ for the Qtv Cradle 3,950.00







PRICE LIST

Accessories Price ListFor Small "Fx-a" Series Hammers Effective: January 1, 2019

Model Part Number Description List Price $

All Models KBM21805 Nitrogen Gas Charge Kit 375.00 K14490 Regulator & Gauge Set 925.00

Fx15a

KF125115 Moil Point, 1.42” Dia. (6 lbs.) 225.00 KF125114 Chisel Bit, 1.42” Dia. (6 lbs.) 225.00 KF125111 Blunt Tip, 1.42” Dia. (6 lbs.) 225.00 (Various) Mounting Pins & Bushing Set 395.00

Fx25a

KF225115 Moil Point, 1.77” Dia. (11 lbs.) 275.00 KF225114 Chisel Bit, 1.77” Dia. (11 lbs.) 275.00 KF225111 Blunt Tip, 1.77” Dia. (11 lbs.) 275.00 (Various) Mounting Pins & Bushing Set 395.00

Fx35a

KF325115 Moil Point, 2.0” Dia. (17.5 lbs.) 325.00 KF325114 Chisel Bit, 2.0” Dia. (17.5 lbs.) 325.00 KF325111 Blunt Tip, 2.0” Dia. (17.5 lbs.) 325.00 KF325077 Asphalt Cutter ~ Cross Cut 725.00 KF330323 Universal Top Cap with Mounting Pins 1,550.00 (Various) OEM Top Cap with Mounting Pins 1,550.00 (Various) Mounting Pins & Bushing Set 575.00

Fx45a

KF425115 Moil Point, 2.38” Dia. (24 lbs.) 350.00 KF425114 Chisel Bit, 2.38” Dia. (24 lbs.) 350.00 KF425111 Blunt Tip, 2.38” Dia. (24 lbs.) 350.00 KF425049 Asphalt Cutter ~ Cross Cut 945.00 KF425048 Asphalt Cutter ~ Inline 945.00 KF425045 Tamper Assembly - 12” square 1,075.00 KF430500 Universal Top Cap with Mounting Pins 1,550.00 (Various) OEM Top Cap with Mounting Pins 1,550.00 (Various) Mounting Pins & Bushing Set 575.00 K26666 Two-Position Skid-Steer Bracket 1,700.00 KBM16500 Auto-Lubrication System Kit (carrier mounted) 1,380.00 K18410 Pin-on, 1/4 -Yard Wain-Roy® Bracket 1,950.00

Fx55a

KF525115 Moil Point, 2.68” Dia., 33 lbs. 450.00

KF525114 Chisel Bit, 2.68” Dia., 33 lbs. 450.00 KF525111 Blunt Tip, 2.68” Dia., 33 lbs. 450.00 KF525085 Asphalt Cutter ~ Cross Cut 1,050.00 KF525084 Asphalt Cutter ~ Inline 1,050.00 KF525081 Tamper Assembly - 12” square 1,200.00 KBM630650 Universal Top Cap with Mounting Pins 1,800.00 (Various) OEM Top Cap with Mounting Pins 1,675.00 (Various) Mounting Pins & Bushing Set 575.00 K26666 Two-Position Skid-Steer Bracket 1,700.00 KBM16500 Auto-Lubrication System (carrier mounted) 1,380.00 K18410 Pin-on, 1/4 -Yard Wain-Roy® Bracket 1,950.00

PRICE LIST

Accessories Price ListFor Medium "F & Fx" Series Hammers Effective: January 1, 2019


All Models KBM21805 Nitrogen Gas Charge Kit 375.00 K14490 Regulator & Gauge Set 925.00

F6

KF625113 Moil Point, 3.0” Dia. (47 lbs.) 535.00

KF625114 Chisel Bit, 3.0” Dia. (47 lbs.) 535.00

KF625111 Blunt Tip, 3.0” Dia. (47 lbs.) 535.00

KF625057 Asphalt Cutter ~ Cross Cut 1,160.00

KF625056 Asphalt Cutter ~ Inline 1,160.00

KF625053 Tamper Assembly - 12” square 1,295.00

KBM630650 Universal Top Cap with Mounting Pins 1,800.00

(Various) OEM Top Cap with Mounting Pins 1,800.00

(Various) Mounting Pins & Bushing Set 575.00

K26666 Two-Position Skid-Steer Mounting Bracket 1,700.00

KBM16500 Auto-Lubrication System Kit (carrier mount) 1,380.00

K18410 Pin-on 1/4 -Yard Wain-Roy® Bracket 1,950.00

F9

KF925113 Moil Point, 3.5” Dia. (78 lbs.) 700.00

KF925114 Chisel Bit, 3.5” Dia. (78 lbs.) 700.00

KF925111 Blunt Tip, 3.5” Dia. (78 lbs.) 700.00

KF925065 Asphalt Cutter ~ Cross Cut 1,265.00

KF925064 Asphalt Cutter ~ Inline 1,265.00

KF925061 Tamper Assembly - 12” square 1,380.00

KBM930950 Universal Top Cap w/Pins 2,275.00


(Various) Mounting Pins & Bushing Set 575.00

K26666 Two-Position Skid-Steer Bracket 1,700.00

KBM22218 Underwater Kit 155.00

KBM16500 Auto-Lubrication System (carrier mount) 1,380.00

K18410 Pin-on, 1/4 -Yard Wain-Roy® Bracket 1,950.00

Fx125

KFX12525225 Moil Point, 4.33” Dia. (145 lbs.) 950.00

KFX12525224 Chisel Bit, 4.33” Dia. (145 lbs.) 950.00

KFX12525221 Blunt Tip, 4.33” Dia. (145 lbs.) 950.00

KF12050 Universal Top Cap with Mounting Pins 2,825.00


(Various) Mounting Pins & Bushing Set 1,075.00

KBM22221 Underwater Kit 205.00

KBM16501 Auto-Lubrication System Kit (carrier mount) 1,825.00

PRICE LIST

Accessories Price List page 1 of 2For Large "Fx" Series Hammers Effective: January 1, 2019


All Models KBM21805 Nitrogen Gas Charge Kit 375.00

K14490 Regulator & Gauge Set 925.00

Fx175

KFX17525225 Moil Point, 4.72” Dia. (220 lbs.) 1,350.00

KFX17525224 Chisel Bit, 4.72” Dia. (220 lbs.) 1,350.00

KFX17525221 Blunt Tip, 4.72” Dia. (220 lbs.) 1,350.00

KF12050 Universal Top Cap (max stick width of 13”) w/ Mounting Pins 3,400.00

KFX175050 Universal Top Cap (13” to 15” stick width) w/ Mounting Pins 3,400.00



KBM22220-FX Underwater Kit 205.00

KBM16501 Auto-Lubrication System Kit (carrier mounted) 1,825.00

KBM16556 One-Shot Lubrication System Kit (Hammer mounted) 3,090.00

Fx225









KBM16557 Continuous Lubrication System Kit (Hammer mounted) 3,090.00

Fx275





(Various) OEM Top Cap wikth Mounting Pins 3,950.00




KBM16536D One-Shot Lubrication System Kit (Hammer mounted) 3,090.00

KBM16557 Continuous Lubrication System Kit (Hammer mounted) 3,090.00

PRICE LIST

Accessories Price List page 2 of 2For Large "Fx" Series Hammers Effective: January 1, 2019


All Models KBM21805 Nitrogen Gas Charge Kit 375.00

K14490 Regulator & Gauge Set 925.00

Fx375




KF35050 4,500.00

KF35051 4,500.00

(Various) 4,500.00

(Various) 1,700.00

KBM22220-FX 205.00

KBM16502 2,215.00

KBM16558

Universal Top Cap w/ Mounting Pins; 475mm (18.7”) Centers

Universal Top Cap w/Mounting Pins; 572mm (22.52”) Centers

OEM Top Cap with Mounting Pins

Mounting Pins & Bushing Set

Underwater Kit

Auto-Lubrication System Kit (carrier mounted)

Continuous Lubrication System Kit (Hammer mounted)

3,090.00

Fx475

KFX47525225 2,550.00

KFX47525224 2,550.00

KFX47525221 2,550.00

KF45050 5,100.00

KF45051 5,100.00

(Various) 5,100.00

(Various) 1,700.00

KBM22220-FX 205.00

KBM16502 2,215.00

KBM16559

Moil Point, 6.5” Dia., 475 lbs.

Chisel Bit, 6.5” Dia., 475 lbs.

Blunt Tip, 6.5” Dia., 475 lbs.

Universal Top Cap w/ Mounting Pins; (21.14”) 537mm Centers

Universal Top Cap w/ Mounting Pins; 572mm (22.52”) Centers

OEM Top Cap with Mounting Pins

Mounting Pins & Bushing Set

Underwater Kit

Auto-Lubrication System (Carrier Mtd.)

Continuous Lubrication System Kit (Hammer Mtd.)

3,090.00

PRICE LIST

HydraPak; Vibratory Plate Soil Compactors Effective Date: January 01, 2019

Impulse Force Model Description List Price $

3,000 lbs.

HP35ME 12” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 5,095.00

Available with Hanger Bracket: UNV

HP35ME-S_ 12” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 5,490.00 Available with Hanger Bracket: TLB BOB KU80 WR CP WB WB50 OEM

HP35ME-S 12” wide Vibratory Plate Soil Compactor / Sheeting Driver; with Flat Top Hanger Bracket & Specific Top Cap 6,380.00 Available with Hanger Bracket: FT

6,500 lbs.

HP65II 18TLB 18” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 6,080.00

Available with Hanger Bracket: TLB

HP65II 18_ 18” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 6,545.00 Available with Hanger Bracket: FB WR

HP65II 18FT 18” wide Vibratory Plate Soil Compactor / Sheeting Driver; with Flat Top Hanger Bracket & Specific Top Cap 6,940.00 Available with Hanger Bracket: FT

HP65II TLB 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 6,080.00 Available with Hanger Bracket: TLB

HP65II _ 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 6,545.00 Available with Hanger Bracket: FB WR

HP65II FT 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; with Flat Top Hanger Bracket & Specific Top Cap 6,940.00 Available with Hanger Bracket: FT

7,800 lbs.

HP75 TLB 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 6,345.00

Available with Hanger Bracket: TLB

HP75 _ 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 6,890.00 Available with Hanger Bracket: FB WR

HP75 FT 24” wide Vibratory Plate Soil Compactor / Sheeting Driver; with Flat Top Hanger Bracket & Specific Top Cap 7,275.00 Available with Hanger Bracket: FT

UNV Universal mount, direct pin-on for mini-excavators not utilizing a quick coupler

TLB For direct pin-on for backhoe mounting

BOB For carriers utilizing the Bobcat Exchange System®

FT To accommodate carriers requiring specific OEM mounting by utilizing a specific top cap

KU80 For carriers utilizing the Kubota 7880® coupler

WR For carriers utilizing the Wain-Roy® mounting system

CP For carriers utilizing the CP-027® mounting system

WB For carriers utilizing the Weldco-Beales 27/35 coupler®

WB50 For carriers utilizing the Weldco-Beales 50 coupler®

OEM For carriers utilizing OEM pin spacing

FB A “Floating-Boss” mounting system for carriers requiring OEM pin centers

De s

crip

tio

n o

f C

on

figu

rati

on

s

PRICE LIST

HydraPak; Vibratory Plate Soil Compactors Effective Date: January 01, 2019

Impulse Force Model Description List Price $

13,500 lbs.

HP135II 28” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 9,850.00


Additional mounting sets to accommodate alternative mountings 1,700.00

HP135II _ 28” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 10,740.00 Available with Hanger Bracket: FT FB

Additional mounting sets to accommodate alternative mountings 1,700.00 Additional top cap to accommodate alternative mountings 3,400.00

21,000 lbs.

HP210II 28” wide Vibratory Plate Soil Compactor / Sheeting Driver; Direct Pin-on Style 14,320.00


Additional mounting sets to accommodate alternative mountings 1,700.00

HP210II _ 28” wide Vibratory Plate Soil Compactor / Sheeting Driver; for specific Mounting 15,220.00 Available with Hanger Bracket: FT FB

Additional mounting sets to accommodate alternative mountings 1,700.00 Additional top cap to accommodate alternative mountings 3,950.00

UNV Universal mount, direct pin-on for mini-excavators not utilizing a quick coupler

FB A “Floating-Boss” mounting system for carriers requiring OEM pin centers

FT To accommodate carriers requiring specific OEM mounting by utilizing a specific top cap

Note: HydraPaks are supplied with all necessary Mounting Pins and Bushings (when applicable)

De s

crip

tio

n o

f C

on

figu

rati

on

s

PRICE LIST

Boom Mounted Static Wheel Compactorsfor Mini-Excavators and Excavators Effective: January 1, 2019

Model Description Price

CW 18III Static Compaction Wheel, 18” Wide, Rectangular Padfoot, Pin-on Mounting $7,500.00

Extra Mounting Hardware Set (Pins and Bushings) for standard compactor 575.00

CW 18IV WR Static Compaction Wheel, 18” Wide, Rectangular Padfoot, Wainroy® mounting $7,000.00


Extra Mounting Hardware Set (Pins and Bushings) for standard compactor 1,075.00


Extra Mounting Hardware Set (Pins and Bushings) for standard compactor 1,700.00

FAE USA

2019PRICE LIST

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.

MULCHER WITH HAMMER/FLAIL ROTOR FOR EXCAVATORS.

from 4 to 10.5 gal/min Ø 1,5 in maxPML/HY from 1,5 to 3,5 t

OPTIONS

16cc gear motor with integrated anticavitation valve - (9 - 10.5 GPM)Customized attachment bracketAttachment plate with self levelling deviceMultiple tooth options

STANDARD EQUIPMENT

Anti dust machine bodyBelt transmission8cc gear motor with integrated anticavitation valve - (4 - 5.3 GPM)Hydraulic hosesWelded counter bladeRear rollerSelf levelling protection rubberPossibillity to have the rotor equipped with PML hammers or Y-flailsBlank attachment plate

EXCAVATOR MULCHERS

Data refers to machine as standard.

MODELFlow rate(gal/min)

Pressure(PSI)

Excavator weight (t)

Working width

(in)

Weight(Ibs)

Max shredding diameter

(in)

No. teeth type

hammers flails

min max min max min max PML Y

PML/HY 50 4 5.3 2200 3045 1.5 3.5 20 397 1,5 8 8

PML/HY 70 4 5.3 2200 3045 2.0 3.5 28 430 1,5 10 10

PML/HY 90 4 5.3 2200 3045 2.5 3.5 36 463 1,5 14 14

Hammer PML (standard) Flails Y/2 (option)

PR

ICE

LIS

T

Part number Part description Notes Price $

PML/HY010800050 PML/HY-050 Light Duty Mulcher for excavator 6,304.00 010800070 PML/HY-070 Light Duty Mulcher for excavator 6,619.00 010800090 PML/HY-090 Light Duty Mulcher for excavator 6,934.00

Options500000458-O Customized attachment bracket EX/LIGHT Pin on - Pin graber 2,060.00

D108001780-O Attachment plate with floating system for PML-M/HY 799.00 780000433-O Motor with extension shaft Casappa 16cc. From 9 to 10.5 GPM -

Spare Parts110822000 Hammer PML 20.30 D108002060 "Y" blade kit PML 20.22 900516162 Hex head set bolt UNI 5737 M16 x 80 10.9 black 1.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21 842125002 Belt XPB Gates Quad Power l=1250 2 belts per unit 51.72 500000458 Customized attachment bracket EX/LIGHT including blank plate and custom made ears 2,800.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.

PMM/HY

EXCAVATOR MULCHERS


OPTIONS

27cc gear motor with integrated anticavitation valve - (16 - 18 GPM)

17/34cc variable manual displacement hydraulic piston motor with relief and anticavitation valve - (11 - 23 GPM)

Customized attachment bracketAttachment plate with self levelling deviceMultiple tooth options

STANDARD EQUIPMENT

Anti dust machine bodyBelt transmission16cc gear motor with integrated anticavitation valve - (9 - 10.5 GPM)Hydraulic hosesFlow control system valve (only with 16 cc and 27 cc motors)Welded counter bladeRear rollerSelf levelling protection rubberPossibillity to have the rotor equipped with PML hammers or Y-flailsBlank attachment plate

Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.

from 9 to 23 gal/min Ø 2 in max from 3,5 to 5,5 t


Pressure(PSI)


Working width

(in)

Weight(Ibs)


(in)

No. teeth type

hammers flails


PMM/HY 100 9 10.5 2200 3045 3.5 5.5 40 551 2 16 16

PMM/HY 125 9 10.5 2200 3045 4.0 5.5 50 639 2 20 20

PMM/HY 150 9 10.5 2200 3045 4.5 5.5 59 728 2 24 24


PR

ICE

LIS

T


PMM/HY010801100 PMM/HY-100 Light Duty Mulcher for excavator 7,600.00 010801125 PMM/HY-125 Light Duty Mulcher for excavator 8,010.00 010801150 PMM/HY-150 Light Duty Mulcher for excavator 8,407.00

Rotor equippedD108002060-O With "Y" blade PML -


D108001780-O Attachment plate with floating system for PML-M/HY 799.00 780000434-O Motor with extension shaft Casappa 27cc. 3-17 GPM 878.00 600000153-O Motor with extension shaft BYPY variable 34/17cc. for EX/LIGHT 9 to 20 GPM 2,997.00 600000479-O Customized setting hydraulic motor BYPY 34/17 -


All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.


PML/EX

EXCAVATOR MULCHERS

OPTIONS

38cc gear motor with integrated anticavitation valve - (19.8 - 22.5 GPM)


Customized attachment bracketAttachment plate with self levelling deviceMultiple tooth options

STANDARD EQUIPMENT

Anti dust machine bodyBelt transmission27cc gear motor with integrated anticavitation valve - (9- 17 GPM)Hydraulic hosesFlow control system valve (only with 27 cc and 38 cc motors)Rear hood with mechanic adjustmentWelded counter bladeRear rollerPossibillity to have the rotor equipped with PML hammers or Y-flailsBlank attachment plate


from 9 to 22.5 gal/min Ø 2,5 in max from 5,5 to 7,5 t


Pressure(PSI)


Working width

(in)

Weight(Ibs)


(in)

No. teeth type hammers flails


PML/EX 100 9 17 2600 3000 5.5 7.5 40 705 2.5 16 16

PML/EX 125 9 17 2600 3000 6.0 7.5 50 794 2.5 20 20

PML/EX 150 9 17 2600 3000 6.5 7.5 59 882 2.5 24 24


PR

ICE

LIS

T


PML/EX010802100 PML/EX-100 Light Duty Mulcher for excavator 9,604.00 010802125 PML/EX-125 Light Duty Mulcher for excavator 10,010.00 010802150 PML/EX-150 Light Duty Mulcher for excavator 10,410.00

Rotor equippedD108002060-O With "Y" blade PML -


D108001290-O Attachment plate with floating system for PML/EX 799.00 780000462-O Motor with extension shaft Casappa 38cc. 20 -23 GPM 177.00 600000153-O Motor with extension shaft BYPY variable 34/17cc. for EX/LIGHT 9-20 GPM 2,997.00 600000479-O Customized setting hydraulic motor BYPY 34/17 -


All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.

UML/HY/RW

EXCAVATOR MULCHERS

FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR EXCAVATORS OR SPECIAL MACHINES.

STANDARD EQUIPMENT

Anti dust machine bodyBelt transmission

Hydraulic piston motor 63cc with relief and anticavitation valve -(29 - 40 GPM)

Hydraulic rear hoodWelded counter bladeMotor integrated into the frame

OPTIONS

Multiple tooth optionsCustomized attachment bracketBlank attachment plate


MODEL

Flow rate(gal/min)

Pressure(PSI)

Excavator weight (t.)

Working width

(in)

Weight (Ibs)


(in)

No. teeth

min max min max min max C/3+C/3/SS I+C/3/SS

UML/HY/RW 125 29 40 3000 3600 6 10 53 1300 5 26+2 36+2

UML/HY/RW 150 29 40 3000 3600 6 10 63 1390 5 32+2 42+2

from 29 to 40 gal/min Ø 5 in max from 6 to 10 t

C/3/HD (option)C/3 (standard) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)

PR

ICE

LIS

T


UML/HY/RW012157125 UML/HY/RW-125 Universal forestry mulcher 22,960.00 012157150 UML/HY/RW-150 Universal forestry mulcher 23,310.00

Machine equippedD121175462-O With rotor UML/ST-125 Ø220 type I - hub L 1,454.00 D121175463-O With rotor UML/ST-150 Ø220 type I - hub L 1,586.00

Rotor equipped112800071-O With tooth-blade type C/3 to be multiplied for rotor teeth quantity 31.69 111530018-O With tooth type C/3/HD to be multiplied for rotor teeth quantity 36.96

Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00 311162000-O Attachment plate for excavator U-FML/HY 497.00

600000480-O Customized setting hydraulic motor BYPY 65/32 -

Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121175480 C/3 tooth fixing kit (bolt l=120) composed by bolt, washer & nut 9.90 999999137 Bolt C/3 M20 x 1,5 x 120 12.9 black 7.53 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 846005715 Belt XPB Gates Quad Power l=1500 4 belts per unit 57.76 D115073000 Chain flap section UMM/EX l=239 98.60 D115072990 Chain flap section UMM/EX l=334 135.10 900716103 Hex head set bolt UNI 5739 M16 x 50 10.9 zn 1.93 920116001 Flat washer UNI 6592 Ø16 zn 0.60 920716006 Spring washer UNI 9195 Ø16 zn 0.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.

FML/HY/RW

EXCAVATOR MULCHERS

FORESTRY MULCHER WITH SWINGING HAMMERS ROTOR FOR EXCAVATORSOR SPECIAL MACHINES.

STANDARD EQUIPMENT


Hydraulic piston motor 63cc with relief and anticavitation valve - (29 - 40 GPM)

Hydraulic rear hoodWelded counter bladeMotor integrated into the frame

OPTIONS

Customized attachment bracketBlank attachment plate


MODEL

Flow rate(gal/min)

Pressure(PSI)

Excavator weight (t.)

Working width

(in)

Weight (Ibs)


(in)

No. teeth

min max min max min max FML

FML/HY/RW 125 29 40 3000 3600 6 10 53 1215 5 20

FML/HY/RW 150 29 40 3000 3600 6 10 63 1300 5 24


Hammer FML (standard)

PR

ICE

LIS

T


FML/HY/RW011128125 FML/HY/RW-125 Forestry mulcher 20,710.00 011128150 FML/HY/RW-150 Forestry mulcher 21,020.00

Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00 311162000-O Attachment plate for excavator U-FML/HY 497.00

600000480-O Customized setting hydraulic motor BYPY 65/32 -

Spare Parts111120000 Hammer FML 33.40 111123125 Hammer retaining shaft Ø25 -125 79.20 111123150 Hammer retaining shaft Ø25 -150 78.15 311126000 Spacer washer hardox FML 45 x 26 x 5 6.81 940100100 Plug M TE BSPP 1" DIN 910 14.62 846005715 Belt XPB Gates Quad Power l=1500 4 belts per unit 57.76 D115073000 Chain flap section UMM/EX l=239 98.60 D115072990 Chain flap section UMM/EX l=334 135.10 900716103 Hex head set bolt UNI 5739 M16 x 50 10.9 zn 1.93 920116001 Flat washer UNI 6592 Ø16 zn 0.60 920716006 Spring washer UNI 9195 Ø16 zn 0.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21

500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.



OPTIONS

Customized attachment bracketAttachment plate with self levelling deviceStronger bearing for back rollerMultiple tooth options

PMM/EX

EXCAVATOR MULCHERS

STANDARD EQUIPMENT



Flow control system valveRear hood with mechanical adjustmentAdjustable skidsWelded counter bladeRear rollerPossibillity to have the rotor equipped with PML hammers or Y-flails Blank attachment plate



Pressure(PSI)


Working width

(in)

Weight(Ibs)


(in)

No. teeth typehammers flails

min max min max min max PMM Y

PMM/EX 100 16 35 2600 3600 6 13 42 1147 3 12 12

PMM/EX 125 16 35 2600 3600 6 13 51 1323 3 16 16

PMM/EX 150 16 35 2600 3600 6 13 61 1499 3 18 18

PMM/EX 175 16 35 2600 3600 7 13 70 1676 3 22 22

Hammer PMM (standard) Hammer Y/3 (option)

PR

ICE

LIS

T


PMM/EX011004100 PMM/EX-100 Light Duty Mulcher for excavator 17,260.00 011004125 PMM/EX-125 Light Duty Mulcher for excavator 17,670.00 011004150 PMM/EX-150 Light Duty Mulcher for excavator 18,090.00 011004175 PMM/EX-175 Light Duty Mulcher for excavator 18,500.00

Rotor equipped111024000-O With "Y" blade PMM -


600300005-O Heavy duty roller support PMM 607.00 600000480-O Customized setting hydraulic motor BYPY 65/32 -

Spare Parts111023000 Hammer PMM 33.40 111024000 "Y" blades kit PMM with washers 36.11

900418202 " Hex head set bolt UNI 5712 M18 x 100 10.9 black ( wrench 30 mm) " 7.97

910618001 Nylock lock nut UNI 7473 M18 10 zn 3.71 846005514 Belt XPB Gates Quad Power l=1450 4 belts per unit 58.92

500000458 Customized attachment bracket EX/LIGHT including blank plate and custom made ears 2,800.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.

FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR EXCAVATORS.

DML/HY - DML/HY/VT

STANDARD EQUIPMENT


17/34cc variable manual displacement hydraulic piston motor with relief and anticavitation valve (DML/HY) - (13 - 30 GPM)

Safety and anticavitation valve (DML/HY)

55/38cc variable torque hydraulic piston motor (DML/HY/VT) - (24 - 30 GPM)

Flow control system valveFront hood with mechanical adjustmentRear hood with mechanical adjustmentWelded counter bladeProtection chainsMotor integrated into the frame

OPTIONS

32/65cc variable manual displacement hydraulic piston motor with relief and anticavitation valve (DML/HY) - (24 - 53 GPM)

Customized setting hydraulic motor (DML/HY/VT)Hydraulic rear hoodHydraulic front hoodDiverter valve (plug & play) + ext. wiringCustomized attachment bracketCustomized attachment bracket with extended-heelMultiple tooth options

EXCAVATOR MULCHERS

Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice.*Variable displacement hydraulic motor.



Pressure(PSI)

Excavator weight (t) Working width

(in)Weight

(Ibs)


(in)

No. bladestype E

min max min max min max

DML/HY 75 13 30 2600 3600 5 13 31 1036 5 20

DML/HY 100 13 30 2600 3600 5 13 39 1080 5 24

DML/HY 125 13 30 2600 3600 5 13 49 1125 5 30

DML/HY/VT 75* 24 30 2600 5000 5 13 31 1036 5 20

DML/HY/VT 100* 24 30 2600 5000 5 13 39 1080 5 24

DML/HY/VT 125* 24 30 2600 5000 5 13 49 1125 5 30

Blade E (standard) Blade E/HD (option)

Supporting service legBlank attachment plate

PR

ICE

LIS

T


DML/HY013200080 DML/HY-075 Universal mulcher for excavator 19,860.00 013200100 DML/HY-100 Universal mulcher for excavator 20,600.00 013200125 DML/HY-125 Universal mulcher for excavator 21,230.00

DML/HY/VT013206080 DML/HY-075 VT Universal mulcher for excavator 22,070.00 013206100 DML/HY-100 VT Universal mulcher for excavator 22,910.00 013206125 DML/HY-125 VT Universal mulcher for excavator 23,540.00


112800081-O With blade type E/HD 22.41 600000175-O Hydraulic cylinder for rear hood DML/HY Pos.1 486.00 600000176-O Hydraulic cylinder for front hood DML/HY Pos.2 486.00 600000180-O Hydraulic drive for rear hood with diverter valve 12V DML/HY Including above pos.1 1,116.00 600000181-O Hydraulic drive for front and rear hood with diverter valve 12V DML/HY Including above pos.1 and pos.2 1,867.00 600000194-O Hydraulic drive for rear hood with diverter valve 24V Including above pos.1 1,116.00 600000195-O Hydraulic drive for front and rear hood with diverter valve 24V Including above pos.1 and pos.2 1,867.00 400000012-O Extension wiring diverter valve l=10m 129.00 600000447-O Motor with extension shaft BYPY variable 65/32cc. for DML/HY mech.variable displacement motor 737.00 600000479-O Customized setting hydraulic motor BYPY 34/17 - 600000480-O Customized setting hydraulic motor BYPY 65/32 - 600000442-O Customized setting hydraulic motor Rexroth variable 55 for DML/HY to optimize the mulcher performance

Spare Parts112800098 Blade type E 60.80 112800081 Blade type E/HD 81.90 901214062 Hex socket head cap bolt UNI 5932 M14 x 1,5 x 30 12.9 black 4.35 846005514 Belt XPB Gates Quad Power l=1450 4 belts per unit 58.92

500000458 Customized attachment bracket EX/LIGHT including blank plate and custom made ears 2,800.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.


UML/HY - UML/HY/VT

EXCAVATOR MULCHERS

STANDARD EQUIPMENT


32/65cc variable manual displacement hydraulic piston motor with relief and anticavitation valve (UML/HY) - (19 - 42 GPM)

80/50cc variable torque hydraulic piston motor (UML/HY/VT) - (26 - 42 GPM)

Flow control system valveHydraulic rear hoodWelded counter bladeDouble line protection chainsMotor integrated into the frameBlank attachment plate

OPTIONS

Customized setting hydraulic motor (UML/HY/VT)Rear hood with mechanical adjustmentDiverter valve (plug & play) + ext. wiringCustomized attachment bracketCustomized attachment bracket with extended-heelMultiple tooth optionsWith rotor Bite Limiter (UML/HY/VT)



MODELLO

Flow rate(gal/min)

Pressure (PSI)Excavatorweight (t.)

Working width

(in)

Weight(Ibs)


(in)

No. teeth/hammers type


UML/HY 100 19 42 2600 3620 7 15 44 1918 6 20+2 28+2

UML/HY 125 19 42 2600 3620 7 15 53 2138 6 26+2 36+2

UML/HY 150 19 42 2600 3620 7 15 62 2359 6 32+2 42+2

UML/HY/VT 100* 26 42 2600 5070 7 15 44 1920 6 20+2 28+2

UML/HY/VT 125* 26 42 2600 5070 7 15 53 2138 6 26+2 36+2

UML/HY/VT 150* 26 42 2600 5070 7 15 62 2359 6 32+2 42+2


PR

ICE

LIS

T


UML/HY012116100 UML/HY-100 Universal forestry mulcher for excavator 24,690.00 012116125 UML/HY-125 Universal forestry mulcher for excavator 25,640.00 012116150 UML/HY-150 Universal forestry mulcher for excavator 26,690.00

UML/HY/VT012150100 UML/HY-100 VT Universal forestry mulcher for excavator 28,370.00 012150125 UML/HY-125 VT Universal forestry mulcher for excavator 28,900.00 012150150 UML/HY-150 VT Universal forestry mulcher for excavator 30,270.00

Machine equippedD121175461-O With rotor UML/ST-100 Ø220 type I - hub L 1,278.00 D121175462-O With rotor UML/ST-125 Ø220 type I - hub L 1,454.00 D121175463-O With rotor UML/ST-150 Ø220 type I - hub L 1,586.00

Machine equippedD121177771-O With rotor UML/ST-100 Ø220 Bite Limiter - hub L only for mulchers with VT motor 902.00 D121177772-O With rotor UML/ST-125 Ø220 Bite Limiter - hub L only for mulchers with VT motor 1,038.00 D121177773-O With rotor UML/ST-150 Ø220 Bite Limiter - hub L only for mulchers with VT motor 1,242.00

Rotor equipped112800071-O With tooth-blade type C/3 to be multiplied for rotor teeth quantity 31.69 111530018-O With tooth type C/3/HD to be multiplied for rotor teeth quantity 36.96 112800083-O With tooth type K to be multiplied for rotor teeth quantity 26.52

Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00

600000177-O Mechanical cylinder for U-FML/HY hood - 600000417-O Kit diverter valve 12V for U-FML/HY 885.00 600000418-O Kit diverter valve 24V for U-FML/HY 917.00 400000012-O Extension wiring diverter valve l=10m 129.00 600000480-O Customized setting hydraulic motor BYPY 65/32 - 600000349-O Customized setting hydraulic motor Danfoss variable H1 80 -

Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121175480 C/3 tooth fixing kit (bolt l=120) composed by bolt, washer & nut 9.90 999999137 Bolt C/3 M20 x 1,5 x 120 12.9 black 7.53 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 842159001 Belt XPB Gates Quad Power l=1590 for UML/HY - 5 belts per unit 51.50 891000446 Belt Poly-chain 14M-37 carbon volt l=1568 for UML/HY/VT - 1 belt per unit 479.00 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.

FML/HY


FORESTRY MULCHER WITH SWINGING HAMMER ROTOR FOR EXCAVATORS.

STANDARD EQUIPMENT



Flow control system valveHydraulic rear hoodWelded counter bladeProtection chainsMotor integrated into the frameBlank attachment plate

OPTIONS

Rear hood with mechanical adjustmentDiverter valve (plug & play) + ext. wiringCustomized attachment bracketCustomized attachment bracket with extended-heel

EXCAVATOR MULCHERS

MODELLO

Flow rate(gal/min)


Working width

(in)

Weight(Ibs)


(in)


min max min max min max FML

FML/HY 100 19 42 2600 3620 7 15 44 1830 6 16

FML/HY 125 19 42 2600 3620 7 15 53 2050 6 20

FML/HY 150 19 42 2600 3620 7 15 62 2270 6 24


Hammer FML (standard)

PR

ICE

LIS

T


FML/HY011103100 FML/HY-100 Forestry mulcher for excavator 22,590.00 011103125 FML/HY-125 Forestry mulcher for excavator 23,540.00 011103150 FML/HY-150 Forestry mulcher for excavator 24,490.00


600000177-O Mechanical cylinder for U-FML/HY hood - 600000417-O Kit diverter valve 12V for U-FML/HY 885.00 600000418-O Kit diverter valve 24V for U-FML/HY 917.00 400000012-O Extension wiring diverter valve l=10m 129.00 600000480-O Customized setting hydraulic motor BYPY 65/32 -

Spare Parts111120000 Hammer FML 33.40 111123100 Hammer retaining shaft Ø25 -100 68.80 111123125 Hammer retaining shaft Ø25 -125 79.20 111123150 Hammer retaining shaft Ø25 -150 78.15 311126000 Spacer washer hardox FML 45 x 26 x 5 6.81 940100100 Plug M TE BSPP 1" DIN 910 14.62 842159001 Belt XPB Gates Quad Power l=1590 5 belts per unit 51.50 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.


UML/EX - UML/EX/VT

STANDARD EQUIPMENT


Hydraulic piston motor 63cc with relief and anticavitation valve(UML/EX) - (30 - 40 GPM)

110/60cc variable torque hydraulic piston motor (UML/EX/VT) - (32 - 48 GPM)

Flow control system valveHydraulic rear hoodWelded counter bladeBolted double line protection chains

OPTIONS

Customized setting hydraulic motor (UML/EX/VT)Diverter valve (plug & play) + ext. wiringCustomized attachment bracketCustomized attachment bracket with extended-heelMultiple tooth optionsWith rotor Bite Limiter (UML/EX/VT)

EXCAVATOR MULCHERS


Blank attachment plateAnty-dust rear hoodMotor integrated into the frame


MODEL

Flow rate(gal/min)


Working width

(in)

Weight (Ibs)


(in)



UML/EX 100 30 40 3000 5000 14 20 43 2238 8 20+2 28+2

UML/EX 125 30 40 3000 5000 14 20 53 2370 8 26+2 36+2

UML/EX 150 30 40 3000 5000 14 20 62 2712 8 32+2 42+2

UML/EX/VT 100* 32 48 3000 5000 14 20 43 2403 8 20+2 28+2

UML/EX/VT 125* 32 48 3200 5000 14 20 53 2579 8 26+2 36+2

UML/EX/VT 150* 32 48 3200 5000 14 20 62 2822 8 32+2 42+2


PR

ICE

LIS

T


UML/EX012103100 UML/EX-100 Universal forestry mulcher for excavator 32,010.00 012103125 UML/EX-125 Universal forestry mulcher for excavator 33,280.00 012103150 UML/EX-150 Universal forestry mulcher for excavator 34,490.00

UML/EX/VT012138100 UML/EX-100 VT Universal forestry mulcher for excavator 38,660.00 012138125 UML/EX-125 VT Universal forestry mulcher for excavator 39,760.00 012138150 UML/EX-150 VT Universal forestry mulcher for excavator 40,960.00

Machine equippedD121175451-O With rotor UML/ST-100 Ø220 type I 1,278.00 D121175452-O With rotor UML/ST-125 Ø220 type I 1,454.00 D121175453-O With rotor UML/ST-150 Ø220 type I 1,586.00

Machine equippedD121175221-O With rotor UML/ST-100 Ø220 Bite Limiter only for mulchers with VT motor 902.00 D121175222-O With rotor UML/ST-125 Ø220 Bite Limiter only for mulchers with VT motor 1,038.00 D121175223-O With rotor UML/ST-150 Ø220 Bite Limiter only for mulchers with VT motor 1,242.00


Options500000459-O Customized attachment bracket UML/EX Pin on - Pin graber 2,900.00 500000462-O Customized attachment bracket quick coupler style special order quick coupler 2,163.00 600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00 400000012-O Extension wiring diverter valve l=10m 10 mt. length 129.00 600000336-O Customized setting hydraulic motor Danfoss variable H1 110 to optimize the mulcher performance -

Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121175480 C/3 tooth fixing kit (bolt l=120) composed by bolt, washer & nut 9.90 999999137 Bolt C/3 M20 x 1,5 x 120 12.9 black 7.53 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 846005715 Belt XPB Gates Quad Power l=1500 belt for UML/EX - 5 belts per unit 57.76 891000447 Belt Poly-chain 14M-68 carbon volt l=1568 belt for UML/EX/VT - 1 belt per unit 1,029.00 D143000590 Chain flap section 28 - 6 links l=239 124.00 D143000570 Chain flap section 28 - 6 links l=334 138.80 900516121 Hex head set bolt UNI 5737 M16 x 60 10.9 zn 2.00 920716006 Spring washer UNI 9195 Ø16 zn 0.80 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00

MODEL

Flow rate(gal/min)


Working width

(in)

Weight (Ibs)


(in)



UML/EX 100 30 40 3000 5000 14 20 43 2238 8 20+2 28+2

UML/EX 125 30 40 3000 5000 14 20 53 2370 8 26+2 36+2

UML/EX 150 30 40 3000 5000 14 20 62 2712 8 32+2 42+2

UML/EX/VT 100* 32 48 3000 5000 14 20 43 2403 8 20+2 28+2

UML/EX/VT 125* 32 48 3200 5000 14 20 53 2579 8 26+2 36+2

UML/EX/VT 150* 32 48 3200 5000 14 20 62 2822 8 32+2 42+2

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.


FORESTRY MULCHER WITH SWINGING HAMMER ROTOR FOR EXCAVATORS.

OPTIONS

Diverter valve (plug & play) + ext. wiringCustomized attachment bracket Customized attachment bracket with extended-heel

FML/EX

STANDARD EQUIPMENT


Hydraulic piston motor 63cc with relief and anticavitation valve - (30 - 40 GPM)

Flow control system valveHydraulic rear hoodWelded counter bladeBolted double line protection chainsAnty-dust rear hoodMotor integrated into the frameSupporting service legBlank attachment plate

EXCAVATOR MULCHERS


MODEL

Flow rate(gal/min)


Working width

(in)

Weight (Ibs)


(in)


min max min max min max FMM

FML/EX 100 30 40 3200 5000 14 20 43 1100 8 16

FML/EX 125 30 40 3200 5000 14 20 53 1340 8 20

FML/EX 150 30 40 3200 5000 14 20 62 1580 8 24

Hammer FMM (standard)

PR

ICE

LIS

T


FML/EX011102100 FML/EX-100 Forestry mulcher for excavator 28,170.00 011102125 FML/EX-125 Forestry mulcher for excavator 29,320.00 011102150 FML/EX-150 Forestry mulcher for excavator 30,060.00


600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00 400000012-O Extension wiring diverter valve l=10m 129.00

Spare Parts111220000 Hammer FMM 37.50 111111100 Hammer retaining shaft Ø30 -100 127.00 111111125 Hammer retaining shaft Ø30 -125 139.00 111111150 Hammer retaining shaft Ø30 -150 155.00 940100100 Plug M TE BSPP 1" DIN 910 14.62 846005715 Belt XPB Gates Quad Power l=1500 57.76 D143000590 Chain flap section 28 - 6 links l=239 124.00 D143000570 Chain flap section 28 - 6 links l=334 138.80 900516121 Hex head set bolt UNI 5737 M16 x 60 10.9 zn 2.00 920716006 Spring washer UNI 9195 Ø16 zn 0.80 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.


UML/S/EX/VT

STANDARD EQUIPMENT

Anti dust machine bodyBelt transmission110/60cc variable torque hydraulic piston motor - (40 - 53 GPM)Flow control system valveHydraulic rear hoodInterchangeable counter bladesBolted double line protection chainsAnty-dust rear hoodMotor integrated into the frameBlank attachment plate

OPTIONS

160/115cc variable torque hydraulic piston motor - (40 - 79 GPM)Customized setting hydraulic motorDiverter valve (plug & play) + ext. wiringAdditional reinforced side platesCustomized attachment bracketCustomized attachment bracket with extended-heelMultiple tooth optionsWith rotor Bite Limiter (UML/S/EX/VT)

EXCAVATOR MULCHERS




Pressure(PSI)

Excavatorweight (t)

Working width

(in)

Weight (Ibs)


(in)

No. teeth type


UML/S/EX/VT 125 40 53 3000 5000 18 25 53 3197 10 26+4 36+2

UML/S/EX/VT 150 40 53 3000 5000 18 25 62 3417 10 32+4 42+2


PR

ICE

LIS

T


UML/S/EX/VT014300125 UML/S/EX-125 VT Universal forestry mulcher for excavator 43,500.00 014300150 UML/S/EX-150 VT Universal forestry mulcher for excavator 44,770.00

Machine equippedD143002432-O With rotor UML/S/ST-125 type I HS 1,446.00 D143002433-O With rotor UML/S/ST-150 type I HS 1,794.00

Machine equippedD143000632-O With rotor UML/S/ST-125 Bite Limiter - D143000633-O With rotor UML/S/ST-150 Bite Limiter -



600000471-O Motor with extension shaft Danfoss variable H1 160/108cc. for UML/S/EX VT 54-79 GPM 1,743.00

600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00 400000012-O Extension wiring diverter valve l=10m 10 mt. length 129.00 D143000530-O Side reinforcement kit for UML/S/EX 782.00 600000336-O Customized setting hydraulic motor Danfoss variable H1 110 to optimize the mulcher performance - 600000369-O Customized setting hydraulic motor Danfoss variable H1 160 to optimize the mulcher performance -

Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121174200 C/3 tooth fixing kit (bolt l=130) composed by bolt, washer & nut 9.90 999999137 Bolt C/3 M20 x 1,5 x 120 12.9 black 7.53 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 891000448 Belt Poly-chain 14M-68 carbon volt l=1750 1 belt per unit 1,070.00 D143000590 Chain flap section 28 - 6 links l=239 124.00 D143000570 Chain flap section 28 - 6 links l=334 138.80 900516121 Hex head set bolt UNI 5737 M16 x 60 10.9 zn 2.00 920716006 Spring washer UNI 9195 Ø16 zn 0.80 500000459 Customized attachment bracket UML/EX including blank plate and custom made ears 3,750.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.


UMM/EX - UMM/EX/VT


EXCAVATOR MULCHERS


Pressure(PSI)

Excavatorweight (t)

Working width

(in)

Weight (Ibs)


(in)

No. teeth type


UMM/EX 125 34 48 3500 5000 20 30 53 4145 12 26+2 38+2

UMM/EX 150 34 48 3500 5000 20 30 62 4321 12 32+2 46+2

UMM/EX/VT 125* 34 58 3500 5000 20 30 53 4299 12 26+2 38+2

UMM/EX/VT 150* 34 58 3500 5000 20 30 62 4586 12 32+2 46+2



STANDARD EQUIPMENT


Hydraulic piston motor 63cc with relief and anticavitation valve (UMM/EX) - (34 -48 GPM)

110/60cc variable torque hydraulic piston motor (UMM/EX/VT) - (34 -58 GPM)

Flow control system valve (flow control)Hydraulic rear hoodInterchangeable counter bladesMotor integrated into the frameBolted double line protection chainsSupporting service leg

OPTIONS

Hydraulic piston motor 90cc with relief and anticavitation valve(UMM/EX) - (34 -63 GPM)

160/115cc variable torque hydraulic piston motor (UMM/EX/VT) - (34 - 79 GPM)

Customized setting hydraulic motor (UMM/EX/VT)Diverter valve (plug in and play) + ext. wiringAdditional reinforced side platesCustomized attachment bracketCustomized attachment bracket with fixed thumbMultiple tooth options

PR

ICE

LIS

T


UMM/EX011512125 UMM/EX-125 Universal forestry mulcher for excavator * 46,220.00 011512150 UMM/EX-150 Universal forestry mulcher for excavator * 48,350.00

UMM/EX/VT011513125 UMM/EX-125 VT Universal forestry mulcher for excavator 52,180.00 011513150 UMM/EX-150 VT Universal forestry mulcher for excavator 54,080.00

Machine equippedD115072412-O With rotor UMM/S/DT-125 Ø500 type I - hub Ø60 2,201.00 D115072413-O With rotor UMM/S/DT-150 Ø500 type I - hub Ø60 2,553.00


Options500000460-O Customized attachment bracket UMM/EX Pin on - Pin graber 3,000.00

600000345-O Motor with extension shaft Danfoss variable H1 160/108cc. for UMM/EX Surcharge only for UMM EX VT 1,726.00

600000421-O Kit diverter valve 12V for UMM/EX 885.00 600000422-O Kit diverter valve 24V for UMM/EX 885.00 400000012-O Extension wiring diverter valve l=10m 10 mt. length 129.00 D115073050-O Side reinforcement kit for UMM/EX 798.00 600000336-O Customized setting hydraulic motor Danfoss variable H1 110 to optimize the mulcher performance - 600000369-O Customized setting hydraulic motor Danfoss variable H1 160 to optimize the mulcher performance -

Spare Parts111530017-K Tooth type C/3 99.00 111530018-K Tooth type C/3/HD 133.40 112800093 Blade adaptor C/3 67.90 112800117 Blade type C/3 29.00 112800082-K Tooth type I Only used on type I rotor 87.90 112800083-K Tooth type K Only used on type I rotor 138.50 112700004-K Side scraper tooth type C/3/SS right 244.50 112700005-K Side scraper tooth type C/3/SS left 244.50 D121174200 C/3 tooth fixing kit (bolt l=130) composed by bolt, washer & nut 9.90 999999100 Bolt C/3 M20 x 1,5 x 130 12.9 black 8.13 921820006 Schnorr anti vibration washer Ø20 HS 4.93 910220102 High hex nut UNI 5587 M20 x 1,5 10 black 1.34 842165002 Belt XPB Gates Quad Power l=1650 belt for UMM/EX - 5 belts per unit 63.37 891000448 Belt Poly-chain 14M-68 carbon volt l=1750 belt for UMM/EX/VT - 1 belt per unit 1,070.00 D143000590 Chain flap section 28 - 6 links l=239 124.00 D143000570 Chain flap section 28 - 6 links l=334 138.80 900516121 Hex head set bolt UNI 5737 M16 x 60 10.9 zn 2.00 920716006 Spring washer UNI 9195 Ø16 zn 0.80 500000460 Customized attachment bracket UMM/EX including blank plate and custom made ears 4,400.00

* with 90 cc hy motor

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.

DISC STUMP CUTTERS FOR EXCAVATORS.

SCL/EX/VT

STANDARD EQUIPMENT

Anti dust machine bodyBelt transmission110/60cc variable torque hydraulic piston motor - (26 -42 GPM)Flow control system valveHydraulic front hoodMotor integrated into the frameBolted protection chainsAdjustable supporting service standBlank attachment plateBolted on protection chains

OPTIONS

Motor with extension shaft Sauer variable H1 80/50 (18 -32 GPM)Customized setting hydraulic motorDiverter valve (plug & play) + ext. wiringCustomized attachment bracket (without pins)Customized attachment bracket with extended heel (without pins)Front fixed heel

EXCAVATOR STUMP CUTTERS


L 1 (standard) L 4 (standard)L 3 (standard) L 2 (standard)

from 26 to 42 gal/min from 7 to 15 t


Pressure(PSI)

Excavatorweight (t)

Rotor diameter

(in)

Total width(in)

Weight(Ibs)

No. teeth typeL1/L2/L3/L4


SCL/EX/VT 26 42 2600 5000 7 15 26 27 1664 12+3+12+3

PR

ICE

LIS

T


SCL/EX/VT014600000 SCL/EX VT Stump cutter for excavator 28,190.00

Options

D146000630-O Heel for SCL/EX cpl 853.00 600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00

600000474-O Customized setting hydraulic motor Danfoss variable H1 80 for SCL/EX -

400000012-O Extension wiring diverter valve l=10m 129.00

600000429-O Customized setting hydraulic motor Danfoss variable H1 110 for SCL/EX -

Spare Parts

891000448 Belt Poly-chain 14M-68 carbon volt l=1750 1 belt per unit 1,070.00 D143000590 Chain flap section 28 - 6 links l=239 124.00 900716103 Hex head set bolt UNI 5739 M16 x 50 10.9 zn 1.93 920116001 Flat washer UNI 6592 Ø16 zn 0.60 920716006 Spring washer UNI 9195 Ø16 zn 0.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21500000462 Customized attachment bracket quick coupler style including blank plate and custom made ears 2,500.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.

DISC STUMP CUTTERS FOR EXCAVATORS.

SCM/EX/VT

STANDARD EQUIPMENT

Anti dust machine bodyBelt transmission160/115cc variable torque hydraulic piston motor (40 -58 GPM)Flow control system valveHydraulic front hoodMotor integrated into the frameBolted protection chainsAdjustable supporting service standBlank attachment plateBolted on protection chains

OPTIONS

Customized setting hydraulic motorDiverter valve (plug & play) + ext. wiringCustomized attachment bracket (without pins)Customized attachment bracket with extended heel (without pins)Front fixed heel

EXCAVATOR STUMP CUTTERS


from 40 to 58 gal/min from 14 to 20 t


Pressure(PSI)

Excavatorweight (t)

Rotor diameter

(in)

Total width(in)

Weight(Ibs)

No. teeth typeM1/M2/M3/M4


SCM/EX/VT 40 58 3200 5000 14 20 31 30 2425 12+3+12+3

M 1 (standard) M 4 (standard)M 3 (standard) M 2 (standard)

PR

ICE

LIS

T


SCM/EX/VT013800028 SCM/EX VT Stump cutter for excavator 40,350.00

Options500000461-O Customized attachment bracket SCM/EX 3,100.00

600000700-O Heel for SCM/EX cpl 881.00 600000419-O Kit diverter valve 12V for U-FML/EX 885.00 600000420-O Kit diverter valve 24V for U-FML/EX 885.00 400000012-O Extension wiring diverter valve l=10m 129.00

600000431-O Customized setting hydraulic motor Danfoss variable H1 160 for SCM/EX -

Spare Parts

891000449 Belt Poly-chain 14M-68 carbon volt l=1890 1 belt per unit 1,090.00 D138000300 Central chain flap section SCM/EX 124.00 D138000330 Side chain flap section SCM/EX 76.80 900716091 Hex head set bolt UNI 5739 M16 x 45 10.9 zn 4.47 920116001 Flat washer UNI 6592 Ø16 zn 0.60 920716006 Spring washer UNI 9195 Ø16 zn 0.80 910616001 Nylock lock nut UNI 7473 M16 10 zn 1.21

500000461 Customized attachment bracket SCM/EX including blank plate and custom made ears 3,900.00

All p

ictu

res

show

n ar

e fo

r illu

stra

tion

purp

ose

only

. Act

ual p

rodu

ct m

ay v

ary

due

to p

rodu

ct e

nhan

cem

ent.

RC

ROCK CUTTERS WITH FIXED TOOTH FOR EXCAVATORS.

EXCAVATORROCK CUTTERS

from 2,5 to 70 t

OPTIONAL

Custom made attachment plate with pinsSTANDARD EQUIPMENT

Caged frame with built-in pre-drilled attachment flat plateHydraulic block with compensating and check valveMotor safety cover

Direct drive piston motor with automatic lubrication system that requires no daily maintenance

Anti-wear plates on drum supportDrum with replaceable heavy duty rock teeth

MODEL

Power HP(CV)

RequirementsFlow gal/min

Pressure PSI Excavator weight t.

Workingwidth

(in)

Weight(Ibs)

Rotordiameter

(in)

Heightwith outbracket

(mm)min max min max min max min max

RC 25 30 50 12 21 2175 5080 2,5 7 22 660 15 770

RC 45 50 100 17 32 2610 5080 6 14 25 1040 18 900

RC 65 65 120 24 40 2610 5080 9 16 28 1410 20 960

RC 90 90 140 34 50 3190 5080 14 22 32 2515 24 1250

RC 120 140 200 45 66 3480 5080 20 34 34 3230 26 1310

RC 220 200 380 64 90 3480 5510 28 45 37 5315 30 1575

RC 260 200 400 74 106 3625 5510 35 55 39 5950 30 1675

RC 320 380 480 92 132 3625 5510 45 70 49 8050 30 1770

This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice.

Tooth type R

PR

ICE

LIS

T


RC020100000 RC-25 Rock grinder for excavator 20,600.00 020101000 RC-45 Rock grinder for excavator 26,900.00 020102000 RC-65 Rock grinder for excavator 35,500.00 020103000 RC-90 Rock grinder for excavator 49,900.00 020104000 RC-120 Rock grinder for excavator 60,800.00 020105000 RC-220 Rock grinder for excavator 86,700.00 020106000 RC-260 Rock grinder for excavator 109,700.00 020107000 RC-320 Rock grinder for excavator 132,500.00

Options

Spare Parts112800118-K Tooth type R for RC-25 RC 25 13.53 112800119-K Tooth type R for RC-45/65 RC 45/65 14.19 112800032-K Tooth type R 65 RC 90/120 43.60 112800033-K Tooth type R/HD 65 RC 90/120 65.80 112800121-K Tooth type R for RC-220 RC 220/260/320 61.55 D127001810 Spring ring Ø30 3.41

5 2018/2019-R1.0 2018/2019-R1.0 6

Excavators Exca

vato

rs

12 Metric Ton 24,000 to 32,500 lbsHeavy Duty

Cutting Edge: 1-1/4” x 10”Heavy Duty High CapCutting Edge: 1-1/4” x 10”

Severe Duty RockCutting Edge: 1-1/2” x 10”

Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested

RetailWB34687 2” 2 45 $259

7Y0203/KIT 2-3/4” 2 45 $609

15 Metric Ton 33,000 to 41,500 lbs.Heavy Duty


Severe Duty RockCutting Edge: 1-1/2“ x 10”


RetailWB34687 2” 2 45 $259

7Y0203/KIT 2-3/4” 2 45 $609

Heavy Duty Bucket • 51” Tip Radius Average

Part NumberBucket Capacity No. of

Teeth Retail

Bucket Pins Not Included

Weight SuggestedWidth Cut Struck Rated

EX15HD18 18” 20” 0.36 0.42 3 950 $3,694

EX15HD24 24” 26” 0.48 0.58 4 1125 $3,993

EX15HD30 30” 32” 0.60 0.74 4 1350 $4,337

EX15HD36 36” 38” 0.72 0.91 5 1425 $4,896

EX15HD42 42” 44” 0.84 1.08 5 1525 $5,150

EX15HD48 48” 50” 0.96 1.25 6 1725 $5,658

Heavy Duty High Capacity Bucket • 56” Tip Radius Average Bucket Pins Not IncludedEX15HDC18 18” 20” 0.41 0.47 3 1300 $4,294

EX15HDC24 24” 26” 0.55 0.65 4 1475 $4,959

EX15HDC30 30” 32” 0.68 0.84 4 1625 $5,227

EX15HDC36 36” 38” 0.82 1.03 5 1825 $5,685

EX15HDC42 42” 44” 0.96 1.22 5 2000 $6,078

EX15HDC48 48” 50” 1.09 1.41 6 2200 $6,447

Severe Duty Rock Bucket • 51” Tip Radius Average Bucket Pins Not IncludedEX15SD18 18” 20” 0.36 0.42 3 1150 $4,575

EX15SD24 24” 26” 0.48 0.58 4 1325 $4,991

EX15SD30 30” 32” 0.60 0.74 4 1500 $5,420

EX15SD36 36” 38” 0.72 0.91 5 1700 $6,120

EX15SD42 42” 44” 0.84 1.08 5 1850 $6,438



Teeth Retail



EX12HD18 18” 20” 0.31 0.36 3 850 $3,296

EX12HD24 24” 26” 0.41 0.50 4 1000 $3,688

EX12HD30 30” 32” 0.52 0.65 4 1150 $4,031

EX12HD36 36” 38” 0.62 0.79 5 1300 $4,337

EX12HD42 42” 44” 0.73 0.93 5 1425 $4,603

EX12HD48 48” 50” 0.83 1.08 6 1600 $5,011

Heavy Duty High Capacity Bucket • 51” Tip Radius Average Bucket Pins Not IncludedEX12HDC18 18” 20” 0.36 0.42 3 950 $3,594

EX12HDC24 24” 26” 0.48 0.58 4 1125 $3,933

EX12HDC30 30” 32” 0.60 0.74 4 1275 $4,276

EX12HDC36 36” 38” 0.72 0.91 5 1425 $4,834

EX12HDC42 42” 44” 0.84 1.08 5 1525 $5,090

EX12HDC48 48” 50” 0.96 1.25 6 1725 $5,598

Severe Duty Rock Bucket • 49” Tip Radius Average Bucket Pins Not IncludedEX12SD18 18” 20” 0.31 0.36 3 1075 $4,125

EX12SD24 24” 26” 0.41 0.50 4 1225 $4,610

EX12SD30 30” 32” 0.52 0.65 4 1400 $5,039

EX12SD36 36” 38” 0.62 0.79 5 1600 $5,420

EX12SD42 42” 44” 0.73 0.93 5 1750 $5,755

http://www.werk-brau.com


7 2018/2019-R1.0 2018/2019-R1.0 8

Excavators Exca

vato

rs




Bolt-On Side CuttersPart Number Add. Width Quantity Approx. Weight Suggested Retail

PDE/KIT 3” 2 85 $4068J9614/KIT 4” 2 90 $713





RetailWB34687 2” 2 45 $259

7Y0203/KIT 2-3/4” 2 45 $609



Teeth Retail



EX20HD24 24" 26" 0.55 0.65 4 1500 $5,074 EX20HD30 30" 32" 0.68 0.84 4 1675 $5,354 EX20HD36 36" 38" 0.82 1.03 5 1900 $5,812 EX20HD42 42" 44" 0.96 1.22 5 2050 $6,218 EX20HD48 48" 50" 1.09 1.41 6 2275 $6,638 EX20HD54 54" 56" 1.23 1.60 6 2450 $7,039

Heavy Duty High Capacity Bucket • 62” Tip Radius Average Bucket Pins Not IncludedEX20HDC24 24" 26" 0.67 0.79 4 1825 $5,803 EX20HDC30 30" 32" 0.84 1.02 4 2000 $6,215 EX20HDC36 36" 38" 1.01 1.25 5 2250 $6,781 EX20HDC42 42" 44" 1.18 1.48 5 2425 $7,199 EX20HDC48 48" 50" 1.35 1.72 6 2650 $7,788 EX20HDC54 54" 56" 1.52 1.96 6 2875 $8,252

Severe Duty Rock Bucket • 57” Tip Radius Average Bucket Pins Not IncludedEX20SD24 24" 26" 0.55 0.65 4 1675 $6,343 EX20SD30 30" 32" 0.68 0.84 4 1875 $6,692 EX20SD36 36" 38" 0.82 1.03 5 2100 $7,264 EX20SD42 42" 44" 0.96 1.22 5 2300 $7,773 EX20SD48 48" 50" 1.09 1.41 6 2525 $8,298



Teeth Retail



EX25HD24 24" 26" 0.67 0.79 3 1825 $5,951 EX25HD30 30" 32" 0.84 1.02 4 2000 $6,498 EX25HD36 36" 38" 1.01 1.25 5 2250 $6,994 EX25HD42 42" 44" 1.18 1.48 5 2425 $7,529 EX25HD48 48" 50" 1.35 1.72 6 2650 $8,024 EX25HD54 54" 56" 1.52 1.96 6 2875 $8,533 EX25HD60 60" 62" 1.68 2.19 6 3050 $9,258

Heavy Duty High Capacity Bucket • 67” Tip Radius Average Bucket Pins Not IncludedEX25HDC24 24" 26" 0.74 0.86 3 1900 $6,482 EX25HDC30 30" 32" 0.92 1.11 4 2100 $7,078 EX25HDC36 36" 38" 1.11 1.36 5 2350 $7,618 EX25HDC42 42" 44" 1.29 1.62 5 2525 $8,200 EX25HDC48 48" 50" 1.48 1.88 6 2750 $8,741 EX25HDC54 54” 56” 1.66 2.14 6 2950 $9,294 EX25HDC60 60" 62" 1.85 2.40 6 3125 $10,084

Severe Duty Rock Bucket • 62” Tip Radius Average Bucket Pins Not IncludedEX25SD24 24" 26" 0.67 0.79 3 2150 $7,439 EX25SD30 30" 32" 0.84 1.02 4 2375 $8,123 EX25SD36 36" 38" 1.01 1.25 5 2675 $8,743 EX25SD42 42" 44" 1.18 1.48 5 2900 $9,410 EX25SD48 48" 50" 1.35 1.72 6 3225 $10,030 EX25SD54 54” 56” 1.52 1.96 6 3550 $10,666



9 2018/2019-R1.0 2018/2019-R1.0 10

Excavators Exca

vato

rs


Cutting Edge: 2” x 14”Heavy Duty High Cap

Cutting Edge: 2” x 14”Severe Duty Rock

Cutting Edge: 2-1/4” x 14”


T1156/KIT 3” 2 85 $6788J9614/KIT 4” 2 90 $713


Cutting Edge: 2” x 14”Heavy Duty High Cap

Cutting Edge: 2” x 14”Severe Duty Rock



T1156/KIT 3” 2 85 $6788J9614/KIT 4” 2 90 $713



Teeth Retail



EX35HD24 24” 26” 0.80 0.93 3 2250 $8,350 EX35HD30 30” 32” 1.00 1.20 4 2550 $8,980 EX35HD36 36” 38” 1.20 1.47 4 2775 $9,365 EX35HD42 42” 44” 1.40 1.75 5 3075 $10,246 EX35HD48 48” 50” 1.60 2.03 5 3275 $10,595 EX35HD54 54” 56” 1.80 2.31 6 3575 $11,483 EX35HD60 60” 62” 2.00 2.60 6 3800 $11,950 EX35HD66 66” 68” 2.21 2.88 7 4075 $12,825

Heavy Duty High Capacity Buckett • 73” Tip Radius Average Bucket Pins Not IncludedEX35HDC24 24” 26” 0.94 1.09 3 2600 $9,614 EX35HDC30 30” 32” 1.18 1.39 4 2950 $10,447 EX35HDC36 36” 38” 1.41 1.71 4 3200 $10,775 EX35HDC42 42” 44” 1.65 2.03 5 3525 $12,133 EX35HDC48 48” 50” 1.88 2.36 5 3775 $12,475 EX35HDC54 54” 56” 2.12 2.69 6 4125 $13,189 EX35HDC60 60” 62” 2.35 3.03 6 4350 $13,534 EX35HDC66 66” 68” 2.59 3.36 7 4675 $14,666

Severe Duty Rock Bucket • 67” Tip Radius Average Bucket Pins Not IncludedEX35SD24 24” 26” 0.80 0.93 3 2625 $10,021 EX35SD30 30” 32” 1.00 1.20 4 2925 $10,775 EX35SD36 36” 38” 1.20 1.47 4 3225 $11,238 EX35SD42 42” 44” 1.40 1.75 5 3600 $12,294 EX35SD48 48” 50” 1.60 2.03 5 3850 $12,714 EX35SD54 54” 56” 1.80 2.31 6 4225 $13,779 EX35SD60 60” 62” 2.00 2.60 6 4475 $14,339



Teeth Retail



EX30HD24 24" 26" 0.74 0.86 3 1875 $6,811 EX30HD30 30" 32" 0.92 1.11 4 2125 $7,477 EX30HD36 36" 38" 1.11 1.36 4 2375 $8,017 EX30HD42 42" 44" 1.29 1.62 5 2575 $8,670 EX30HD48 48" 50" 1.48 1.88 5 2775 $9,210 EX30HD54 54" 56" 1.66 2.14 6 3025 $9,835 EX30HD60 60" 62" 1.85 2.40 6 3275 $10,623 EX30HD66 66” 68” 2.03 2.66 7 3425 $11,318

Heavy Duty High Capacity Bucket • 67” Tip Radius Average Bucket Pins Not IncludedEX32HDC24 24" 26" 0.80 0.93 3 2250 $8,163 EX32HDC30 30" 32" 1.00 1.20 4 2550 $8,792 EX32HDC36 36" 38" 1.20 1.47 4 2775 $9,177 EX32HDC42 42" 44" 1.40 1.75 5 3075 $10,058 EX32HDC48 48" 50" 1.60 2.03 5 3275 $10,407 EX32HDC54 54" 56" 1.80 2.31 6 3575 $11,295 EX32HDC60 60" 62" 2.00 2.60 6 3800 $11,762 EX32HDC66 66” 68” 2.21 2.88 7 4075 $12,638

Severe Duty Rock Bucket • 65” Tip Radius Average Bucket Pins Not IncludedEX30SD24 24" 26" 0.74 0.86 3 2250 $8,378 EX30SD30 30' 32" 0.92 1.11 4 2575 $9,197 EX30SD36 36" 38" 1.11 1.36 4 2850 $9,861 EX30SD42 42" 44" 1.29 1.62 5 3150 $10,663 EX30SD48 48" 50" 1.48 1.88 5 3400 $11,328 EX30SD54 54" 56" 1.66 2.14 6 3750 $12,096 EX30SD60 60” 62” 1.85 2.40 6 4100 $13,067



11 2018/2019-R1.0 2018/2019-R1.0 12

Excavators Exca

vato

rs

40 Metric Ton 82,500 to 105,000 lbs.


T1156/KIT 3” 2 90 $6788J9614/KIT 4” 2 90 $713



Severe Duty RockCutting Edge: PER SHANK” x 14”


T1156/KIT 3” 2 90 $6788J9825/KIT 6” 2 90 $948

Heavy DutyCutting Edge: 2” x 14”

Heavy Duty High CapCutting Edge: 2” x 14”




Teeth Retail



EX40HD24 24" 26" 0.94 1.09 3 2600 $9,805 EX40HD30 30" 32" 1.18 1.39 4 2950 $10,727 EX40HD36 36" 38" 1.41 1.71 4 3200 $11,393 EX40HD42 42" 44" 1.65 2.03 5 3525 $12,307 EX40HD48 48" 50" 1.88 2.36 5 3775 $12,987 EX40HD54 54" 56" 2.12 2.69 6 4125 $14,009 EX40HD60 60" 62" 2.35 3.03 6 4350 $14,713 EX40HD66 66" 68" 2.59 3.36 7 4675 $15,626 EX40HD72 72" 74" 2.83 3.69 7 4900 $16,298

Heavy Duty High Capacity Bucket • 81” Tip Radius Average Bucket Pins Not IncludedEX40HDC24 24" 26" 1.21 1.38 3 3575 $10,787 EX40HDC30 30" 32" 1.49 1.72 4 4025 $11,708 EX40HDC36 36" 38" 1.74 2.05 4 4350 $12,392 EX40HDC42 42" 44" 2.03 2.44 5 4750 $13,311 EX40HDC48 48" 50" 2.32 2.83 5 5075 $13,992 EX40HDC54 54" 56" 2.60 3.22 6 5575 $14,987 EX40HDC60 60" 62" 2.89 3.62 6 5875 $16,446 EX40HDC66 66" 68" 3.18 4.01 7 6325 $17,419 EX40HDC72 72" 74" 3.47 4.37 7 6650 $18,123

Severe Duty Rock Bucket • 73” Tip Radius Average Bucket Pins Not IncludedEX40SD24 24" 26" 0.94 1.09 3 3000 $11,765 EX40SD30 30' 32" 1.18 1.39 3 3325 $12,873 EX40SD36 36" 38" 1.41 1.71 4 3700 $13,671 EX40SD42 42" 44" 1.65 2.03 5 4100 $14,773 EX40SD48 48" 50" 1.88 2.36 5 4375 $15,582 EX40SD54 54" 56" 2.12 2.69 6 4800 $16,813 EX40SD60 60" 62" 2.35 3.03 6 5225 $17,631



Teeth Retail



EX50HD30 30" 32" 1.34 1.58 4 4250 $12,955 EX50HD36 36" 38" 1.61 1.94 4 4550 $13,781 EX50HD42 42" 44" 1.88 2.31 5 4950 $14,808 EX50HD48 48" 50" 2.15 2.68 5 5225 $15,827 EX50HD54 54" 56" 2.42 3.05 6 5650 $17,005 EX50HD60 60" 62" 2.69 3.44 6 5950 $18,271 EX50HD66 66" 68" 2.96 3.82 7 6350 $19,629 EX50HD72 72" 74" 3.23 4.20 7 6750 $21,087

Heavy Duty High Capacity Bucket • 84” Tip Radius Average Bucket Pins Not IncludedEX50HDC30 30" 32" 1.68 1.96 4 4525 $13,903 EX50HDC36 36" 38" 2.02 2.40 4 4850 $14,790 EX50HDC42 42" 44" 2.36 2.85 5 5275 $15,891 EX50HDC48 48" 50" 2.70 3.31 5 5600 $16,987 EX50HDC54 54" 56" 3.03 3.78 6 6025 $18,252 EX50HDC60 60" 62" 3.37 4.26 6 6350 $19,614 EX50HDC66 66" 68" 3.71 4.74 7 6800 $21,067 EX50HDC72 72" 74" 4.04 5.21 7 7300 $22,634

Severe Duty Rock Bucket • 80” Tip Radius Average Bucket Pins Not IncludedEX50SD30 30" 32" 1.34 1.58 3 5000 $15,547 EX50SD36 36" 38" 1.61 1.94 4 5350 $16,537 EX50SD42 42" 44" 1.88 2.31 4 5850 $17,770 EX50SD48 48" 50" 2.15 2.68 4 6225 $18,993 EX50SD54 54" 56" 2.42 3.05 5 6750 $20,406 EX50SD60 60" 62" 2.69 3.44 5 7150 $21,924



13 2018/2019-R1.0 2018/2019-R1.0 14

Excavators Exca

vato

rs



Severe Duty RockCutting Edge: PER SHANK x 18”


T1156/KIT 3” 2 90 $6788J9825/KIT 6” 2 90 $948

70 Metric Ton 150,000 to 200,000 lbs.


T1156/KIT 3” 2 90 $6788J9825/KIT 6” 2 90 $948

Heavy DutyCutting Edge: PER SHANK x 18”

Heavy Duty High CapCutting Edge: PER SHANK x 18”

Severe Duty RockCutting Edge: PER SHANK x 18”



Teeth Retail





Severe Duty Rock Bucket • 82” Tip Radius Average Bucket Pins Not IncludedEX60SD36 36" 38" 1.81 2.16 4 5350 $19,345 EX60SD42 42" 44" 2.12 2.57 4 5900 $20,579 EX60SD48 48" 50" 2.42 2.99 4 6300 $22,113 EX60SD54 54" 56" 2.72 3.41 5 6850 $23,636 EX60SD60 60" 62" 3.02 3.84 5 7250 $25,395 EX60SD66 66" 68" 3.33 4.27 6 7800 $27,284



Teeth Retail





Severe Duty Rock Bucket • 86” Tip Radius Average Bucket Pins Not IncludedEX70SD36 36" 38" 2.36 2.85 3 6175 $21,257 EX70SD42 42" 44" 2.70 3.31 4 6600 $22,612 EX70SD48 48" 50" 3.03 3.78 4 7150 $24,796 EX70SD54 54" 56" 3.37 4.26 5 7575 $25,969 EX70SD60 60" 62" 3.71 4.74 5 8150 $27,903 EX70SD66 66" 68" 4.04 5.21 6 8550 $29,979 EX70SD72 72" 74" 4.74 5.69 6 9400 $32,206



15 2018/2019-R1.0 2018/2019-R1.0 16

Excavators Exca

vato

rs

PowerGrip Bucket

Features• Increases Productivitiy• Increases Machine’s Versatility• Includes Integral Loading Holding & Pressure

Control Manifold• Single Function Control in Handling Materials• Constant Clamp Force thru Full Rotation with

Constant Swing Speed• Increases Precision & Control

v

Features• No Teeth For Grading• Tapered Side Walls• Bolt On Edge Included• Drainage Holes standard

Metric TonClass Part Number WB

ShellBucket Capacity

Weight SuggestedRetailWidth Cut Struck Rated

Long Reach

1DCG48 1 48” 49” 0.58 0.64 950 $3,8741DCG54 1 54” 55” 0.60 0.73 1000 $4,0351DCG60 1 60” 60” 0.73 1.02 1100 $4,420

12, 15 & 20

1DCG48 1 48” 49” 0.58 0.64 950 $3,8741DCG54 1 54” 54” 0.65 0.73 1000 $4,0351DCG60 1 60” 60” 0.73 1.02 1100 $4,4201DCG66 1 66” 66” 0.80 1.12 1200 $4,5981DCG72 1 72” 72” 0.87 1.22 1300 $4,7961DCG78 1 78” 72” 0.98 1.32 1350 $5,151

25


303DCG54 3 54” 56” 1.13 1.53 2000 $6,6843DCG60 3 60” 62” 1.25 1.71 2150 $7,0373DCG66 3 66” 68” 1.38 1.90 2300 $7,2813DCG72 3 72” 74” 1.51 2.09 2450 $7,5173DCG84 3 84” 85” 1.77 2.47 2750 $8,135

35




For High Capacity Buckets, use theNext Class up Ditching Bucket

Except Long Reach Machines

Ditching and Grading Bucket


Machine ClassPart Bucket Capacity No. of

Teeth Weight SuggestedRetailNumber Width Rated

12 PG07-24-14T 24” 0.46 4 1330 $11,902

PG07-30-14T 30” 0.62 4 1460 $13,397

PG07-36-14T 36” 0.77 5 1670 $14,266

15 & 20

PG08-36-21T 36” 0.95 5 2000 $15,425

PG08-48-21T 48” 1.18 6 2750 $21,621

PG07-48-21D 48” 1.18 n/a* 2020 $16,139

PG07-60-21D 60” 1.50 n/a* 2330 $17,786



17 2018/2019-R1.0 2018/2019-R1.0 18

Excavators Exca

vato

rs

Severe Duty Ditching and Grading Bucket

Features• Same Features as Standard DCG Bucket plus:

• Double Bottom• Side Wear Guard• Center Rib

• Bolt On Edge Included

Metric TonClass Part Number WB

ShellBucket Capacity

Width Cut Struck Rated

Long Reach

1SDDCG48 1 48” 49” 0.58 0.64 1075 $4,6011SDDCG54 1 54” 55” 0.60 0.73 1125 $4,7881SDDCG60 1 60” 60” 0.73 1.02 1250 $5,245

12, 15 & 20

1SDDCG48 1 48” 49” 0.58 0.64 1075 $4,6011SDDCG54 1 54” 54” 0.65 0.73 1125 $4,7881SDDCG60 1 60” 60” 0.73 1.02 1250 $5,2451SDDCG66 1 66” 66” 0.80 1.12 1350 $5,4541SDDCG72 1 72” 72” 0.87 1.22 1425 $5,689


303SDDCG54 3 54” 56” 1.13 1.53 2250 $7,8843SDDCG60 3 60” 62” 1.25 1.71 2425 $8,2993SDDCG66 3 66” 68” 1.38 1.9 2625 $8,5833SDDCG72 3 72” 74” 1.51 2.09 2800 $8,861




Features• 45° Tilt Each Direction• No Teeth For Grading• Tapered Side Walls• Two Cylinder Action• Manifolds For Quick Hose Replacement• Pricing Does Not Include Hydraulics• Bolt On Edge Included

Metric TonClass Part Number

Bucket CapacityRetail



12WTB48-1.00 48” 49” .75 1.00 1875 $9,131

WTB60-.75 60” 61” 0.60 0.75 1950 $9,420

WTB60-1.02 60” 61” 0.73 1.02 2000 $9,710

15 & 20WTB48.1.00A 48” 49” .75 1.00 1950 $10,019

WTB60-1.02A 60” 61” 0.86 1.02 2100 $10,019

WTB66-1.12A 66” 67” 0.92 1.12 2225 $10,490

25WTB60-1.38 60” 62” 1.13 1.38 2275 $14,641

WTB66-1.52 66” 68” 1.25 1.52 2400 $15,442

WTB72-1.77 72” 74” 1.45 1.77 2700 $15,837

30WTB66-1.52A 66” 68” 1.25 1.52 2500 $15,831

WTB72-2.09 72” 74” 1.71 2.09 2975 $17,149

35WTB66-2.07 66” 68” 1.70 2.07 3075 $20,382

WTB72-2.28 72” 74” 1.87 2.28 3650 $22,170

WTB84-2.28 84” 86” 1.87 2.28 3737 $22,443

40 & 50WTB78-2.67 78” 80” 2.19 2.67 4000 $24,263

WTB84-2.89 84” 86” 2.37 2.89 4375 $25,061

Hydraulic Tilting Grading Bucket

Weight SuggestedRetail




19 2018/2019-R1.0 2018/2019-R1.0 20

Excavators Exca

vato

rs

Bolt-On Cutting Edge

Features• AR400 Material• Doubled Beveled Edge• Counter Sunk Bolt Holes• Designed For Plow Bolts• Includes Hardware (nuts & bolts)• Included in Pricing for all DCG & WTB Buckets

Metric TonClass Part Number Edge

Length Thickness Width Bolt Size Weight Suggested

Retail

Grading Buckets:

12, 15 & 20

BOCE3/4-8-48 49 1/2 3/4 8 3/4” 84 $289

BOCE3/4-8-54 55 1/2 3/4 8 3/4” 94 $309

BOCE3/4-8-60 61 1/2 3/4 8 3/4” 105 $341

BOCE3/4-8-66 67 1/2 3/4 8 3/4” 115 $359

BOCE3/4-8-72 73 1/2 3/4 8 3/4” 125 $382

BOCE3/4-8-78 79 1/2 3/4 8 3/4 135 $411

Grading Buckets:

25

BOCE1-10-48 49 1/2 1 10 3/4” 140 $459

BOCE1-10-54 55 1/2 1 10 3/4” 157 $514

BOCE1-10-60 61 1/2 1 10 3/4” 174 $569

BOCE1-10-66 67 1/2 1 10 3/4” 191 $625

BOCE1-10-72 73 1/2 1 10 3/4” 208 $680

BOCE1-10-78 79 1/2 1 10 3/4” 225 $735

BOCE1-10-84 85 1/2 1 10 3/4” 242 $800

Grading Buckets: 30 & 35

Digging Buckets:

12, 15, 20, & 25

BOCE1.25-12-48 49 1/2 1-1/4 12 1” 140 $741

BOCE1.25-12-54 55 1/2 1-1/4 12 1” 157 $778

BOCE1.25-12-60 61 1/2 1-1/4 12 1” 174 $831

BOCE1.25-12-66 67 1/2 1-1/4 12 1” 191 $876

BOCE1.25-12-72 73 1/2 1-1/4 12 1” 208 $906

BOCE1.25-12-78 79 1/2 1-1/4 12 1” 225 $943

BOCE1.25-12-84 85 1/2 1-1/4 12 1” 242 $988

Grading Buckets: 40 & 50

Digging Buckets:

30, 35, & 40

BOCE1.5-12-60 61 1/2 1 1/2 12 1” 314 $963

BOCE1.5-12-66 67 1/2 1 1/2 12 1” 345 $1,009

BOCE1.5-12-72 73 1/2 1 1/2 12 1” 375 $1,055

BOCE1.5-12-78 79 1/2 1 1/2 12 1” 406 $1,102

BOCE1.5-12-84 85 1/2 1 1/2 12 1” 436 $1,149

Note: When ordering for an existing bucket, the Bucket Serial Number must be supplied.

Features• Non-Greasable• Soft, Non-heat treated• Ordered as single pins, most machines need two pins

Part Number Weight SuggestedRetail

BP-60MM 30 $193

BP-65MM 35 $259

BP-70MM 40 $291

BP-80MM 45 $317

BP-90MM 50 $348

BP-100MM 50 $459

BP-110MM 60 $590

BP-115MM 70 $648

BP-120MM 75 $1,055

BP-130MM 90 $1,609

Single Dead Pin

Part Number Weight Fitting SuggestedRetail

450216 3 10 SAE Oring $109

Diverter Valve

Features• Clean change from one attachment to another• Helps eliminates drift



21 2018/2019-R1.0 2018/2019-R1.0 22

Excavators Exca

vato

rs

Tilting Spring Loaded & D-Lock Coupler

Metric TonClass Part Number Pin Diameter

(mm) Type Pin spread range (mm) Weight (lbs) Suggested

Retail

12TD140-65 60-65 Hydraulic 345-425 680 $16,760

TSC140 60-65 Manual Dedicated 680 $11,135

15

TD180-70 70 Hydraulic 395-465 845 $20,539

TSC180 70 Manual Dedicated 840 $14,516

TD180-80 80 Hydraulic 390-485 1030 $20,539


20TD240-80 80 Hydraulic 430-525 1250 $29,117


25 - 30TD250-90 90 Hydraulic 455-545 1320 $29,117


Hyd Kit BR7-#### Made specifically for each machine $2,275

Features• Minimum of 180° rotation 90° each way (Manual Style)• Minimum of 120° rotation 60° each way (D-Lock Style)• Includes (1) set of non-greasable soft bucket pins• Includes machine specific hydraulic kit for coupler portion• Jumper hoses for tilt funcion required (not included)• Fail-Safe Safety Pin (Manual Style)• Adjustable Springs (Manual Style)• Heavy Duty Actuator

Hydraulic (D-Lock) Style shown. See Mini Section (pg. 60) for Manual Style

D-Lock Variable Center Hydraulic CouplerFeatures• Picks up multiple pins centers• Picks up multiple pin diameters• Single pin diameter couplers

available upon request• Only requires 2 hydraulic lines• Includes machine specific hydraulic kit• Includes (1) set of non-greasablesoft bucket pins

• Locks front pin in event rear pin isnot engaged

• Features only 7 moving parts


(mm)Base width

(mm)Pin spread range (mm) Weight (lbs) Suggested

Retail

12 HD140-65-60 60 & 65 220 340-412 345-425 410 $7,155

15 HD180-80-70 70 & 80 278 374-465 390-495 650 $8,087

20 - 30 HD250-90-80 80 & 90 320 441-517 455-545 910 $10,775

35HD350-100-90 90 & 100 345 462-566

477-595 1240 $13,092

HD350-110-100 100 & 110 368 507-596 520-622 1490 $13,707

40HD450-110-100-B 100 & 110 368 507-596

520-622 1600 $16,383

HD450-110-100-C 100 & 110 368 550-639 563-666 1600 $16,875

50 - 70 HD650 440 600-705 2420 $27,039

85 HD850 $39,220

120 HD1200 $56,140




23 2018/2019-R1.0 2018/2019-R1.0 24

Excavators Exca

vato

rs

Hydraulic Multi-Tined Thumb

Features• 120° Standard Rotation• Additional Tine Options Available• Informational Form Must be Completed When Thumb

is Working With any Non Werk-Brau Attachment

Metric TonClass Part Number Description No.

of Tines Weight SuggestedRetail

12EZG-EX12-2 EX1 - 400 2 620 $6,682

EZG-EX12-3 EX1 - 400 3 670 $6,883

EZG-EX12-4 EX1 - 400 4 740 $7,083

15EZG-EX15-2 EX1.5 - 400 2 700 $7,304

EZG-EX15-3 EX1.5 - 400 3 750 $7,545

EZG-EX15-4 EX1.5 - 400 4 800 $7,785

20EZG-EX20-3 EX2/3 - 500 3 1240 $8,996

EZG-EX20-4 EX2/3 - 500 4 1280 $9,290

25EZG-EX25-3 EX2/3 - 500 3 1240 $9,564

EZG-EX25-4 EX2/3 - 500 4 1280 $9,899

30EZG-EX30-3 EX2/3 - 500 3 1260 $10,928

EZG-EX30-4 EX2/3 - 500 4 1320 $11,302

35EZG-EX35-3 EX2/3 - 500 3 1260 $11,377

EZG-EX35-4 EX2/3 - 500 4 1320 $11,778

40EZG-EX40-3 EX4/5 - 600 3 1780 $13,479

EZG-EX40-4 EX4/5 - 600 4 1810 $13,920

50EZG-EX50-3 EX4/5 - 600 3 1930 $13,616

EZG-EX50-4 EX4/5 - 600 4 2000 $14,057

Spring Loaded Manual Coupler

Features• Fail Safe Safety Pin• Built to OEM Spacing• Lifting Loops• Adjustable Springs• Includes (1) set of bucket pins

Metric TonClass Part Number Type REF Style Weight Suggested

Retail

12SQC-EX12 Straight EX1 -400 Spring Loaded 500 $5,094

SQC-EX12C Combo EX1 - 400 Spring Loaded 500 $5,661

15SQC-EX15 Straight EX1 -400 Spring Loaded 650 $5,185


20 & 25SQC-EX20 Straight EX2/3 - 500 Spring Loaded 900 $6,619


30 & 35SQC-EX30 Straight EX2/3 - 500 Spring Loaded 1400 $8,870

SQC-EX30C Combo EX2/3 - 500 Spring Loaded 1400 $9,831



25 2018/2019-R1.0 2018/2019-R1.0 26

Excavators Exca

vato

rs

Progressive Link Hydraulic Multi-Tined Thumb

Metric TonClass Part Number Description Weight Suggested

Retail

12 EZG-EX12-PROMulti Tine Pro Link thumb

EX1 = 4001050 $8,258


EX1.5 = 4001100 $10,545


EX2/3 = 5001500 $11,770


EX2/3 = 5001500 $12,984


EX2/3 = 5001850 $14,291


EX2/3 = 5001900 $16,760


EX4/5 = 6001970 $17,698


EX4/5 = 6003100 $19,604

Features• 180° Standard Rotation• Linkage is self contained (not through sticklinkage)

• Additional Tine Options Available• Informational Form Must be Completed WhenThumb is working With any Non Werk-BrauAttachment

Stick Mounted Multi-Tine Thumb

Metric TonClass

Part Number Description No. of

TineTine

SpacingTip

Radius Weight SuggestedRetail

12 & 15

EZRGEX1-M3-52 Rigid 2 18” 52 620 $3,537

EZRGEX1-M3-52H Hydraulic 2 18” 52 620 $6,136

EZRGEX1-M3-58 Rigid 2 18” 58 650 $3,898


EZRGEX1-M3-64 Rigid 2 18” 64 680 $4,259


20, 25& 30

EZRGEX2-TC2-56 Rigid 4 24” 56 1200 $4,469

EZRGEX2-TC2-56H Hydraulic 4 24” 56 1250 $7,356

EZRGEX2-TC2-62 Rigid 4 24” 62 1300 $5,047


EZRGEX2-TC2-67 Rigid 4 24” 67 1350 $5,624


EZRGEX2-TC2-71 Rigid 4 24” 71 1400 $6,202


EZRGEX2-TC2-78 Rigid 4 24” 78 1450 $6,779


35 &40

EZRGEX3-TC2-72 Rigid 4 32” 72 1600 $7,115


EZRGEX3-TC2-84 Rigid 4 32” 84 1700 $7,836


Features• 120° Standard Rotation• Standard Designs For Quick Delivery• Easy Installation• Not recommended for machines with couplers orhigh cap buckets

Stick mounted thumbs are a universal style, the tines may or may not mesh with the bucket, sold as is



27 2018/2019-R1.0 2018/2019-R1.0 28

Excavators Exca

vato

rs

Ripper

Features• Heavy Duty Ripper Shank• Extra Heavy Duty Upper Channel• Optimized Arc for Best Rip• CAT Tooth Installed (standard)

Metric TonClass

Part Number

ShankTooth Retail


Weight SuggestedLength Width

12, 15, & 20WBRT2 30” 2-1/2” 9W-8459 850 $3,128

WBRT2-2 30” 2-1/2” (2) 9W-8459 1100 $5,161

25, 30 & 35WBRT3 30” 2-3/4” 9W-8459 1000 $4,760

WBRT3-2 30” 2-3/4” (2) 9W-8459 1400 $7,855

40, 50, 60 & 70

WBRT4 48” 4” 9W-8559 2000 $9,398

WBRT4-2 48” 4” (2) 9W-8559 2800 $14,035

Wheel Compactor

Features• Multiple Wheels• Foot Pads Standard• Offset Wheels For Better Compaction• High Quality Bearings Used• Includes Blade

Metric TonClass

Part Number Width # of Wheels Wheel Diam Weight Suggested

Retail

12, 15, 20 & 25

WBC218-2 18” 3 42” 2,250 $8,410

WBC224-2 24” 3 42” 2,500 $8,603

WBC236-2 36” 4 42” 3,750 $9,664




29 2018/2019-R1.0 2018/2019-R1.0 30

Excavators Exca

vato

rs

Pavement Removal Bucket

Features• Ribbed Bottom to Prevent Denting• Designed for Moving Concrete Slabs andAsphalt Removal

• CAT Tooth Standard

Metric TonClass

Part Number Width No./Style of

ToothThroat

Front-Back Weight SuggestedRetail

12, 15, & 20

12PRB24 24” (3) 9W8452 19” - 14” 1900 $6,739

12PRB36 36” (3) 9W8452 19” - 14” 2100 $7,012

12PRB42 42” (4) 9W8452 15 - 10” 2500 $8,282

20, 25, 30 & 35

20PRB36 36” (3) 9W8452 15” - 10” 2100 $7,619

20PRB42 42” (4) 9W8452 15” - 10” 2500 $8,282

20PRB48H 48” (4) 9W8452 15” - 10” 3100 $9,268

40 & 50 40PRB54H 54” (4) 9W8552 20” - 14” 4800 $16,526


Grading Rake

Features• High Strength Tines• Channel Used Throughout for Strength• Work With Thumb For Grappling Action

Metric TonClass

Part Number Width No. of Tines Weight Suggested

Retail

12 & 15,

WBER36-1 36” 4 815 $2,458

WBER42-1 42” 5 925 $2,785

WBER48-1 48” 6 1150 $3,112

WBER60-1 60” 7 1200 $3,771

20 & 25WBER42-2 42” 5 1350 $4,977

WBER48-2 48” 6 1535 $5,408

WBER60-2 60” 7 1800 $6,343

30, 35, 40 & 50

WBER48-3 48” 5 1815 $6,693

WBER60-3 60” 6 2200 $8,113

WBER66-3 66” 7 2400 $8,850

WBER72-3 72” 8 2650 $9,772




31 2018/2019-R1.0 2018/2019-R1.0 32

Excavators Exca

vato

rs

Box Style Grapple

Features• Wide Mouth Opening• Greasable Pivot Points• 3 Position Mount For Rigid Version• Reinforced Box Style For Longer life• Edge Pads At the End of Each Tine• Every Grapple works with and with out a coupler• One Piece Assembly• Comes with Rigid Stick

• Hydraulic Option not available

Metric TonClass

Part Number

LowerWidth

UpperWidth

JawOpening

No. OfTines Weight Suggested

Retail

12WBBG36.05 36" 22" 86" 2/3 2100 $11,292

WBBG42.05 42" 25" 86" 2/3 2200 $12,159

WBBG48.05 48" 34" 86" 3/4 2350 $13,608

15WBBG42.1 42" 35" 86" 2/3 2100 $12,159

WBBG48.1 48" 34" 86" 3/4 2350 $13,608

WBBG54.1 54" 38" 86" 3/4 2550 $14,767

20WBBG42.15 42" 25" 86" 2/3 3350 $16,703

WBBG48.15 48" 34" 86" 3/4 3700 $18,449

WBBG54.15 54" 38" 86" 3/4 3900 $19,446

25WBBG48.2 48" 28" 112" 2/3 3700 $18,449

WBBG54.2 54" 38" 112" 3/4 3900 $19,446

WBBG60.2 60" 42" 112" 3/4 4150 $20,692

30 & 35

WBBG48.3 48" 28" 116" 2/3 4300 $21,440

WBBG54.3 54" 38" 116" 3/4 4800 $23,934

WBBG60.3 60" 46" 116" 4/5 5100 $25,429

40WBBG48.4 48" 28" 120" 2/3 5900 $26,095

WBBG54.4 54" 38" 120" 3/4 6700 $29,636

WBBG60.4 60" 46" 120" 4/5 6900 $29,965

50 & 60

WBBG60.5 60" 40" 155” 2/3 6950 $30,180

WBBG72.5 72" 50" 155” 3/4 7600 $32,393

WBBG84.5 84" 60" 155” 4/5 8700 $37,081

Hangers, Flat Plates & Hammer Adaptors

Features• Standard OEM Set up• Hanger Blanks: Loose Set of Ears• Hangers on a Flat Plate: Ears Welded to a Plate• Hangers Drilled for Hammer: Ears on a Plate with

holes drilled to specific hammer/auger/compactorpattern

Metric TonClass Part Number Description Weight Suggested

Retail

12 & 15EX1-HGS Hangers Blanks 350 $1,534

EX1-HFP Hangers on a Flat Plate 500 $1,773

EX1-HHM Hangers Drilled For Hammer 500 $2,062










•

•

•

Bucket Pins Not IncludedBucket Pins Not Included



39 2018/2019-R1.0 2018/2019-R1.0 40

Mini & BH Mini

& BH

Universal 1 - Standard BackhoesHeavy Duty

Cutting Edge: 1” x 8”Severe Duty / Rock

Cutting Edge: 1” x 8”Coral


Heavy Duty Bucket


Teeth Retail



WBMN12HD 12” 14” 3.00 3.50 3 390 $1,133

WBMN16HD 16” 18” 4.00 4.80 3 410 $1,256

WBMN18HD 18” 20” 4.60 5.60 4 475 $1,286

WBMN24HD 24” 26” 6.20 8.00 5 510 $1,387

WBMN30HD 30” 32” 8.00 10.50 5 545 $1,582

WBMN36HD 36” 38” 9.50 13.00 6 625 $1,759

Heavy Duty High Capacity Bucket Bucket Pins Not Included

WBMN12HDC 12” 14” 4.00 4.60 3 410 $1,377

WBMN18HDC 18” 20” 6.00 7.20 4 460 $1,522

WBMN24HDC 24” 26” 8.00 10.00 5 530 $1,626

WBMN30HDC 30” 32” 10.00 12.80 5 585 $1,809

WBMN36HDC 36” 38” 12.00 15.50 6 660 $2,121

Coral Rock Bucket Bucket Pins Not Included

CORAL12WMN2 12 13 2.75 3.25 4 430 $1,453

CORAL16WMN2 16 17 3.64 4.30 5 465 $1,547

CORAL18WMN2 18 19 4.15 4.90 6 490 $1,767

CORAL20WMN2 20 21 4.58 5.40 6 500 $1,907

CORAL24WMN2 24 25 5.68 6.70 8 540 $2,143

CORAL30WMN2 30 31 7.29 8.60 10 595 $2,404

Severe Duty Rock Bucket Bucket Pins Not Included

WBMN12SD1 12” 14” 3.00 3.50 3 425 $1,604

WBMN18SD1 18” 20” 4.60 5.60 4 490 $1,854

WBMN24SD1 24” 26” 6.20 8.00 5 540 $2,041

WBMN30SD1 30” 32” 8.00 10.50 5 595 $2,230

WBMN36SD1 36” 38” 9.50 13.00 6 645 $2,420

High Capactiy Severe Duty Rock Bucket Bucket Pins Not Included

WBMN12SDC1 12’’ 14’’ 3.90 4.60 3 495 $1,722

WBMN18SDC1 18” 20” 6.00 7.20 4 515 $2,070

WBMN24SDC1 24” 26” 8.00 10.00 5 560 $2,160

WBMN30SDC1 30” 32” 10.00 12.80 5 620 $2,336

WBMN36SDC1 36” 38” 12.00 15.50 6 700 $2,519

Part Number Add. Width Quantity Approx. Weight Suggested RetailWBMNSC 1” 2 15 $119

Ford Style BucketsHeavy Duty Ford

High CapacityStandard Duty Ford Ford Style Cemetery

Standard Duty Ford Bucket Design


Teeth Retail



FWB12S 12” 13” 3.22 3.80 3 290 $1,586

FWB16S 16” 17” 4.66 5.50 3 325 $1,641

FWB18S 18” 19” 5.34 6.30 4 345 $1,681

FWB24S 24” 25” 7.46 8.80 5 400 $1,884

FWB30S 30” 31” 9.58 11.30 5 450 $2,034

FWB36S 36’’ 37’’ 11.69 13.80 6 510 $2,115

Heavy Duty High Capacity Ford Design Bucket Pins Not IncludedFWB12HDC 12” 13” 4.49 5.30 3 300 $1,722

FWB16HDC 16” 17” 5.93 7.00 3 330 $1,884

FWB18HDC 18” 19” 6.69 7.90 4 400 $1,972

FWB24HDC 24” 25” 8.64 10.20 5 495 $2,167

FWB30HDC 30” 31” 11.10 13.10 5 575 $2,477

FWB36HDC 36” 37” 13.56 16.00 6 670 $2,848

Standard Ford Style Cemetery Design Bucket Pins Not Included

FORD36BH 36” 37” 6.13 7.23 6 290 $2,283



41 2018/2019-R1.0 2018/2019-R1.0 42

Mini & BH Mini

& BH

Mini 04 Class 1,500 to 2,100 lbs.Heavy Duty

Cutting Edge: 3/4” x 6”

Heavy Duty Bucket Bucket Pins Not Included


Teeth Weight SuggestedRetail DNET

Width Cut Struck Rated

04MNHD8 8” 9” 0.30 0.36 2 35 $348

04MNHD10 10” 11” 0.37 0.45 3 44 $361

04MNHD12 12” 13” 0.45 0.54 3 50 $392

04MNHD16 16” 17” 0.60 0.72 3 59 $448

04MNHD18 18” 19” 0.67 0.80 4 62 $519

Mini 05 Class 2,150 to 4,900 lbs.

Severe Duty / Rock Cutting Edge: 3/4” x 6”

Heavy Duty Cutting Edge: 3/4” x 6”

CoralCutting Edge: 3/4” x 6”

Weld-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested Retail

WBMNSC 1” Additional 2 15 $119



Teeth Weight SuggestedRetail DNET

Width Cut Struck Rated05MNHD8 8” 9” 0.65 0.78 2 75 $406

05MNHD10 10” 11” 0.73 0.87 3 80 $42205MNHD12 12” 13” 0.80 1.00 3 85 $45505MNHD16 16” 17” 1.00 1.30 3 90 $51805MNHD18 18” 19” 1.10 1.50 4 105 $59705MNHD20 20” 21” 1.30 1.80 4 110 $68205MNHD24 24” 25” 1.70 2.20 5 120 $81205MNHD30 30” 31” 1.90 2.70 5 140 $986

Severe Duty Rock Bucket Bucket Pins Not Included05MNSD8 8” 9” 0.65 0.78 2 110 $546

05MNSD10 10” 11” 0.73 0.87 3 115 $56905MNSD12 12” 13” 0.80 1.00 3 120 $61205MNSD16 16” 17” 1.00 1.30 3 130 $77605MNSD18 18” 19” 1.10 1.50 4 140 $80305MNSD20 20” 21” 1.30 1.80 4 150 $1,01105MNSD24 24” 25” 1.70 2.20 5 160 $1,103

Coral Bucket Bucket Pins Not Included05MNCR8 8” 9” 0.65 0.78 3 110 $546

05MNCR10 10” 11” 0.73 0.87 3 115 $56905MNCR12 12” 13” 0.80 1.00 4 120 $61205MNCR18 18” 19” 1.10 1.50 6 140 $80305MNCR24 24” 25” 1.70 2.20 8 160 $1,103



43 2018/2019-R1.0 2018/2019-R1.0 44

Mini & BH Mini

& BH

Mini 76 Class 2,150 lbs. to 4,900 lbs.

Severe Duty / Rock Cutting Edge: 1” x 6”


CoralCutting Edge: 1” x 6”

Weld-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested RetailWBMNSC 1” 2 15 $119

Heavy Duty Bucket


Teeth Retail



76MNHD10 10” 11” 0.80 1.00 3 140 $60176MNHD12 12” 13” 1.05 1.40 3 155 $61776MNHD16 16” 17” 1.35 1.90 3 170 $66876MNHD18 18” 19” 1.70 2.20 4 180 $73876MNHD20 20” 21” 2.00 2.50 4 190 $82476MNHD24 24” 25” 2.50 3.00 5 210 $94476MNHD30 30” 31” 3.20 3.80 5 235 $1,11676MNHD36 36” 37” 3.80 4.60 6 260 $1,340

Severe Duty Rock Bucket Bucket Pins Not Included76MNSD12 12” 13” 1.05 1.40 3 160 $81276MNSD16 16” 17” 1.35 1.90 3 175 $88276MNSD18 18” 19” 1.70 2.20 4 185 $97376MNSD20 20” 21” 2.00 2.50 4 195 $1,08576MNSD24 24” 25” 2.50 3.00 5 205 $1,245

Coral Bucket Bucket Pins Not Included76MNCR12 12” 13” 1.05 1.4 4 160 $81276MNCR16 16” 17” 1.35 1.9 5 175 $88276MNCR18 18” 19” 1.70 2.2 6 185 $97376MNCR20 20” 21” 2.00 2.5 6 195 $1,08576MNCR24 24” 25” 2.50 3.0 8 210 $1,245


Severe Duty / RockCutting Edge:1” x 6”




Heavy Duty Bucket


Teeth RetailWidth Cut Struck Rated1MNHD10 10” 11” 1.48 1.78 3 150 $8991MNHD12 12” 13” 1.77 2.13 3 160 $9161MNHD16 16” 17” 2.36 2.83 3 185 $9571MNHD18 18” 19” 2.66 3.19 4 190 $1,0151MNHD20 20” 21” 2.96 3.54 4 215 $1,0831MNHD24 24” 25” 3.54 4.25 5 250 $1,1821MNHD30 30” 31” 4.43 5.31 5 275 $1,3221MNHD36 36” 37” 5.31 6.64 6 315 $1,505

Severe Duty Rock Bucket Bucket Pins Not Included1MNSD12 12” 13” 1.77 2.13 3 205 $1,2571MNSD16 16” 17” 2.36 2.83 3 235 $1,3151MNSD18 18” 19” 2.66 3.19 4 245 $1,3931MNSD20 20” 21” 2.96 3.54 4 260 $1,4901MNSD24 24” 25” 3.54 4.25 5 290 $1,623

Coral Bucket Bucket Pins Not Included1MNCR12 12” 13” 1.77 2.13 4 205 $1,3151MNCR16 16” 17” 2.36 2.83 5 235 $1,3931MNCR18 18” 19” 2.66 3.19 6 245 $1,4901MNCR20 20” 21” 2.96 3.54 6 260 $1,6231MNCR24 24” 25” 3.54 4.25 8 290 $1,709



45 2018/2019-R1.0 2018/2019-R1.0 46

Mini & BH Mini

& BH


Severe Duty / RockCutting Edge: 1” x 6”

Heavy Duty Cutting Edge: 1” x 6”



Heavy Duty Bucket


Teeth RetailWidth Cut Struck Rated15MNHD12 12” 13” 2.40 3.00 3 249 $1,10115MNHD16 16” 17” 3.20 4.00 3 275 $1,14415MNHD18 18” 19” 3.60 4.50 4 295 $1,18715MNHD20 20” 21” 4.00 5.10 4 315 $1,25215MNHD24 24” 25” 5.00 6.30 5 338 $1,35515MNHD30 30” 31” 6.40 8.00 5 365 $1,46815MNHD36 36” 37” 7.80 9.80 6 390 $1,667

Severe Duty Rock Bucket Bucket Pins Not Included15MNSD12 12” 13” 2.40 3.00 3 300 $1,38815MNSD16 16” 17” 3.20 4.00 3 320 $1,43015MNSD18 18” 19” 3.60 4.50 4 340 $1,49615MNSD20 20” 21” 4.00 5.10 4 350 $1,58115MNSD24 24” 25” 5.00 6.30 5 370 $1,707


Mini 2 & U2 BH Class 7,500 to 11,000 lbs.

Severe Duty / RockCutting Edge: 1” x 8”




Heavy Duty Bucket


Teeth RetailWidth Cut Struck Rated2MNHD12 12” 13” 2.60 3.25 3 290 $1,2162MNHD16 16” 17” 3.50 4.30 3 300 $1,2572MNHD18 18” 19” 3.90 4.90 4 330 $1,2982MNHD20 20” 21” 4.30 5.40 4 350 $1,3672MNHD24 24” 25” 5.20 6.70 5 390 $1,4662MNHD30 30” 31” 6.50 8.60 5 430 $1,6192MNHD36 36” 37” 7.80 10.60 6 475 $1,823

Severe Duty Rock Bucket Bucket Pins Not Included2MNSD12 12” 13” 2.60 3.25 3 320 $1,5322MNSD16 16” 17” 3.50 4.30 3 330 $1,5732MNSD18 18” 19” 3.90 4.90 4 350 $1,6392MNSD20 20” 21” 4.30 5.40 4 380 $1,7212MNSD24 24” 25” 5.20 6.70 5 420 $1,8502MNSD30 30” 31” 6.50 8.60 6 460 $2,040

Coral Bucket Bucket Pins Not Included2MNCR12 12” 13” 2.60 3.25 4 320 $1,5322MNCR16 16” 17” 3.50 4.30 5 330 $1,5732MNCR18 18” 19” 3.90 4.90 6 350 $1,6392MNCR20 20” 21” 4.30 5.40 6 380 $1,7212MNCR24 24” 25” 5.20 6.70 8 420 $1,8502MNCR30 30” 31” 6.50 8.60 10 460 $2,040



47 2018/2019-R1.0 2018/2019-R1.0 48

Mini & BH Mini

& BH


Severe Duty / Rock Cutting Edge: 1-1/4” x 8”


CoralCutting Edge: 1 1/4” x 8”


Heavy Duty Bucket


Teeth Retail



3MNHD12 12” 13” 3.00 3.50 3 370 $1,5603MNHD16 16” 17” 4.00 4.80 3 410 $1,5923MNHD18 18” 19” 4.60 5.60 4 460 $1,7063MNHD20 20” 21” 5.00 5.90 4 475 $1,7753MNHD24 24” 25” 6.20 8.00 5 505 $1,9393MNHD30 30” 31” 8.00 10.50 5 540 $2,0903MNHD36 36” 37” 9.50 13.00 6 630 $2,3553MNHD42 42” 43” 11.00 15.50 6 720 $2,823




Severe Duty / Rock Cutting Edge: 1 1/4” x 8”


CoralCutting Edge: 1 1/4” x 8”

Bolt-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested Retail

WBSC15/KIT 1-1/2” Additional 2 50 $175



Teeth Weight SuggestedRetailWidth Cut Struck Rated

*4MNHD12 12” 13” 4.40 5.00 3 400 $1,6104MNHD16 16” 17” 5.40 6.20 3 445 $1,7014MNHD18 18” 19” 5.80 6.80 4 490 $1,8514MNHD20 20” 21” 6.40 7.60 4 525 $1,9734MNHD24 24” 25” 7.60 9.20 5 545 $2,1934MNHD30 30” 31” 9.60 11.90 5 580 $2,4134MNHD36 36” 37” 11.50 14.40 6 660 $2,6484MNHD42 42” 43” 13.40 16.90 6 780 $2,901

*WILL NOT WORK FOR ALL MACHINES

Severe Duty Rock Bucket Bucket Pins Not Included4MNSD18 18” 19” 5.80 6.80 3 510 $2,3324MNSD20 20” 21” 6.40 7.60 4 540 $2,5414MNSD24 24” 25” 7.60 9.20 4 570 $2,7464MNSD30 30” 31” 9.60 11.90 5 620 $3,2404MNSD36 36 37” 11.50 14.40 6 670 $3,466

Coral Bucket Bucket Pins Not Included4MNCR18 18” 19” 5.80 6.80 5 490 $2,3324MNCR20 20” 21” 6.40 7.60 6 540 $2,5414MNCR24 24” 25” 7.60 9.20 6 570 $2,7464MNCR30 30” 31” 9.60 11.90 8 620 $3,240



49 2018/2019-R1.0 2018/2019-R1.0 50

Mini & BH Mini

& BH


Severe Duty / Rock Cutting Edge: 1-1/4” x 8”

Heavy Duty Cutting Edge: 1 1/4” x 8”

CoralCutting Edge: 1-1/4” x 8”

Bolt-On Side Cutters Part Number Add. Width Quantity Approx. Weight Suggested Retail

WBSC15/KIT 1-1/2” Additional 2 50 $175



Teeth Weight SuggestedRetailWidth Cut Struck Rated

5MNHD16 16” 17” 6.00 7.00 3 605 $2,3655MNHD18 18” 19” 6.80 7.90 3 615 $2,4055MNHD20 20” 21” 7.50 8.90 4 640 $2,4955MNHD24 24” 25” 9.00 10.90 4 655 $2,5865MNHD30 30” 31” 11.30 14.00 5 685 $2,7465MNHD36 36” 37” 13.50 17.10 5 760 $2,9365MNHD42 42” 43” 15.80 20.10 6 810 $3,130



PowerGrip Bucket

Features• Increases Productivitiy• Increases Machine’s Versatility• Includes Integral Loading Holding & Pressure

Control Manifold• Single Function Control in Handling Materials• Constant Clamp Force thru Full Rotation with

Constant Swing Speed• Increases Precision & Control

Machine ClassPart Bucket Capacity No. of

Teeth Weight SuggestedRetailNumber Width Rated

1 & 15 PG05-24-5T 24” 4.50 5 525 $6,422

2, 3, U2 & U1

PG06-24-9T 24” 7.50 5 700 $8,371

PG06-30-9T 30” 9.40 5 850 $8,821

4 & 5PG07-24-9T 24” 7.50 5 900 $10,619

PG07-30-9T 30” 9.40 5 980 $11,577




51 2018/2019-R1.0 2018/2019-R1.0 52

Mini & BH Mini

& BH

Features• 45° Tilt Each Direction• No Teeth for Grading• Tapered Side Walls• One Cylinder Action

• Except on Mini 5 (Two Cylinder)• Bolt on Edge Included

Hydraulic Tilting and Grading BucketDitching and Grading Bucket

Features• No Teeth for Grading and Finishing• Tapered Side Walls• Drainage holes only in Mini 5 Class• Bolt on Edge included

Class Part Number Lip SizeBucket Capacity


05 05MNDCG24 3/4” X 6” 24” 25” 1.70 2.20 130 $833

05MNDCG30 3/4” X 6” 30” 31” 1.90 2.70 150 $1,029

76

76MNDCG24 3/4” X 6” 24” 25” 2.50 3.00 197 $872

76MNDCG30 3/4” X 6” 30” 31” 3.20 3.80 224 $1,016

76MNDCG36 3/4” X 6” 36” 37” 3.80 4.60 250 $1,093

76MNDCG42 3/4” X 6” 42” 43” 5.20 6.20 276 $1,247

76MNDCG48 3/4” X 6” 48” 49” 5.80 7.00 300 $1,371

1 & 15

1MNDCG24 3/4” X 6” 24” 25” 3.54 4.25 217 $963

1MNDCG30 3/4” X 6” 30” 31” 4.43 5.31 244 $1,104

1MNDCG36 3/4” X 6” 36” 37” 5.31 6.64 269 $1,232

1MNDCG42 3/4” X 6” 42” 43” 6.20 7.40 296 $1,372

1MNDCG48 3/4” X 6“ 48” 49” 7.00 8.50 323 $1,520

2, 3, U2 & U1

3MNDCG30 1” X 6” 30” 31” 6.20 7.80 484 $1,645

3MNDCG36 1” X 6” 36” 37” 6.30 8.00 524 $1,794

3MNDCG42 1” X 6” 42” 43” 8.80 11.00 552 $2,020

3MNDCG48 1” X 6” 48” 49” 10.00 12.50 584 $2,129

3MNDCG54 1” X 6” 54” 55” 11.20 14.10 614 $2,285

3MNDCG60 1” X 6” 60” 61” 12.10 15.90 655 $2,564

4

4MNDCG36 1” X 6” 36” 37” 9.80 11.70 664 $2,302

4MNDCG42 1” X 6” 42” 43” 11.30 13.70 692 $2,414

4MNDCG48 1” X 6” 48” 49” 13.00 15.80 734 $2,542

4MNDCG54 1” X 6” 54” 55” 14.50 17.80 764 $2,659

4MNDCG60 1” X 6” 60” 61” 15.80 19.80 805 $2,779

5

5MNDCG42 1” X 8” 42” 43” 12.60 15.60 775 $2,793

5MNDCG48 1” X 8” 48” 49” 14.40 18.00 834 $2,976

5MNDCG54 1” X 8” 54” 55” 16.20 20.30 898 $3,197

5MNDCG60 1” X 8” 60” 61” 18.00 22.70 855 $3,395

5MNDCG72 1” X 8” 72” 73” 22.40 27.50 960 $3,792

For High Capacity Buckets, use the Next Class up Ditching Bucket

Except Long Reach Machines


Class Part NumberBucket Capacity


76 WTB05-36 36” 37” 3.00 3.45 339 $6,086

WTB05-39 39” 40” 4.00 4.60 542 $6,315

1, 15, 2 & U2

WTB1-36 36” 37” 5.50 6.30 609 $6,283

WTB1-42 42” 43” 6.50 7.40 675 $6,487

WTB1-48 48” 49” 7.50 8.50 713 $6,827

3 & U1 WTB3-36 36” 37” 7.50 9.40 834 $7,429

WTB3-42 42” 43” 8.75 10.00 872 $7,595

WTB3-48 48” 49” 10.00 12.50 934 $8,003

4 & 5WTB5-48 48” 49” 10.00 12.50 934 $8,003

WTB5-54 54” 55” 11.20 14.10 994 $8,275

WTB5-60 60” 61” 12.50 15.70 1105 $8,589




53 2018/2019-R1.0 2018/2019-R1.0 54

Mini & BH Mini

& BH

Features• AR400 Material• Doubled Beveled Edge• Counter Sunk Bolt Holes• Designed for Plow Bolts• Includes Hardware (nuts & bolts)• Included in Pricing for all DCG & WTB Buckets

Bolt-On Cutting Edge

Class Part Number Edge Width Thickness Width Bolt

Size Weight SuggestedRetail

DCG Buckets:76, 1, & 15

WTB Buckets:76 & 1

Digging Buckets:

04, 05, 76, & 1

BOCE5/8-6-24 25 1/2 5/8 6 5/8” 27 $132

BOCE5/8-6-30 31 1/2 5/8 6 5/8” 34 $165

BOCE5/8-6-36 36 1/2 5/8 6 5/8” 39 $189

BOCE5/8-6-39 40 1/2 5/8 6 5/8” 42 $210

BOCE5/8-6-42 43 1/2 5/8 6 5/8” 46 $227

BOCE5/8-6-48 49 1/2 5/8 6 5/8” 53 $258

BOCE5/8-6-54 55 1/2 5/8 6 5/8” 94 $309

BOCE5/8-6-60 61 1/2 5/8 6 5/8” 105 $341

DCG Buckets: 2, 3, 4,

5, U2 & U1WTB Buckets: 15, 2, 3, 4, 5, U2 & U1

Digging Buckets:

15, 2, 3, 4, 5

BOCE3/4-8-30 31 1/2 3/4 8 3/4” 54 $175

BOCE3/4-8-36 37 1/2 3/4 8 3/4” 64 $209

BOCE3/4-8-42 42 1/2 3/4 8 3/4” 72 $236

BOCE3/4-8-48 49 1/2 3/4 8 3/4” 84 $275

BOCE3/4-8-54 55 1/2 3/4 8 3/4” 94 $309

BOCE3/4-8-60 61 1/2 3/4 8 3/4” 105 $341

Cemetery / Bell Hole BucketFeatures• Designed for digging graves and digging deep straight walls• Not for standard trenching• Flat Bottom• Round Back When Curled• No Drag When Curled

Standard Design: Closed Back

Class Part Number

Bucket Capacity No. of Teeth RetailWidth Cut Struck Rated

05 05MN24BH 24” 25” 2.00 2.50 5 175 $1,052

76, 1 & 15 1MN36BH 36” 37” 2.90 3.48 6 265 $1,436

2, 3, 4, U2 & U1

3MN36BH 36” 37” 7.10 8.52 6 500 $1,610

3MN42BH 42” 43” 8.25 9.95 7 550 $2,011

55MN36BH 36” 37” 8.75 11.00 5 630 $3,018

5MN42BH 42” 43” 10.00 12.50 6 660 $3,449



55 2018/2019-R1.0 2018/2019-R1.0 56

Mini & BH Mini

& BH

Cribbing Bucket

Features• Extra Heavy Duty Side Plates• Hook Shape for Prying Railroad Ties• Flat Top For Hangers• Additional Side Wear Plates

Class Part Number

Bucket Width Style No. of

Teeth Weight SuggestedRetail

1 & 15 8HDCRIB-2 8” Mini (2) 8330 200 $1,312

2, 3, 4, 5, & U1

8HDCRIB 8” Standard (2) 8340 350 $1,579

8HDCRIBL 8” Long (2) 8340 350 $1,740


Wedge Lock Coupler

Features• Works with JD ZTS (w/ same size)• Wedge is tightened by Nut and Bolt• Bucket Pins Included

Class Part Number Type Weight SuggestedRetail

76 & 1 WBMWLK-76 Wedge 55 $1,172

15 & 2 WBMWLK-15 Wedge 80 $1,367

3 & 4 WBMWLK-3 Wedge 170 $1,916

Single Dead Pin

Features• Non-Greasable• Soft, Non-heat treated• Ordered as single pins, most machines need two pins

Class Part Number Weight SuggestedRetail

04 & 05 BP-25MM 10 $85

76, 1 & 15 BP-30MM 10 $108

76, 1 & 15 BP-35MM 10 $117

15, 2 & 3 BP-40MM 12 $131

2, 3 U2 & U1 BP-45MM 15 $139

2, 3 U2 & U1 BP-50MM 20 $169

4 & 5 BP-55MM 25 $177

4 & 5 BP-60MM 30 $193



57 2018/2019-R1.0 2018/2019-R1.0 58

Mini & BH Mini

& BH

KLAC Coupler & Hanger Blanks

Class Part Number Coupler Style Part Extension

KlacClass Weight Suggested

Retail

05 (2,200-4,400 lbs)

WBKLC-M Mechanical C 30 $1,250

WBKLC-BL Blank Plate C 15 $277

76(4,400 - 7,700 lbs)

WBKLD-M Mechanical D 60 $1,531

WBKLD-PR Klac Protect D 10 $498

WBKLD-BL Blank Plate D 20 $367

1 & 15(7,700 - 12,100 lbs)

WBKLE-M Mechanical E 100 $1,542

WBKLE-PR Klac Protect E 15 $498

WBKLE-BL Blank Plate E 40 $409

3 & 4(12,100 - 22,000 lbs)

WBKLF-M Mechanical F 150 $2,054

WBKLF-PR Klac Protect F 15 $537

WBKLF-BL Blank Plate F 50 $566

KLAC Coupler (Mechanical)

KLAC BlankKLAC Protect

• Center of gravity catch for extra safety• Meets and exceeds all Europeanand North American Safety requirements

• Minimal wear from age and usestays tight

• Does not include mounting-hardened pins

• A hose protection system• Spring guarded hose• Steel cover to protectretracted hose

• Blanks Ready to install• Easy to add to existing bucketinventory

ClassPart Bucket Capacity No. of

Teeth Weight SuggestedRetailNumber Width Cut Struck Rated

0505MNHD8-KLC 8 9 0.65 0.78 2 75 $63305MNHD12-KLC 12 13 0.80 1.00 3 85 $68405MNHD18-KLC 18 19 1.10 1.50 4 105 $83805MNHD24-KLC 24 25 1.70 2.20 5 120 $1,071

7676MNHD10-KLD 10 11 0.80 1.00 3 120 $91876MNHD12-KLD 12 13 1.05 1.40 3 135 $93876MNHD18-KLD 18 19 1.70 2.20 4 155 $1,06876MNHD24-KLD 24 25 2.50 3.00 5 180 $1,29076MNHD36-KLD 36 37 3.80 4.60 6 220 $1,719

1

1MNHD12-KLE 12 13 1.77 2.13 3 160 $1,2911MNHD16-KLE 16 17 2.36 2.83 3 185 $1,3371MNHD18-KLE 18 19 2.66 3.19 4 190 $1,3981MNHD20-KLE 20 21 2.96 3.54 4 215 $1,4721MNHD24-KLE 24 25 3.54 4.25 5 250 $1,5791MNHD30-KLE 60 61 4.43 5.31 5 275 $1,7311MNHD36-KLE 36 37 5.31 6.64 6 315 $1,928

15

15MNHD12-KLE 12 13 2.40 3.00 3 249 $1,49215MNHD18-KLE 18 19 3.60 4.50 4 295 $1,58515MNHD24-KLE 24 25 5.00 6.30 5 338 $1,76515MNHD30-KLE 30 31 6.40 8.00 5 365 $1,88915MNHD36-KLE 36 37 7.80 9.80 6 390 $2,10415MNHD42-KLE 42 43 9.20 11.60 6 415 $2,28815MNHD48-KLE 48 49 10.60 13.40 7 435 $2,455

3 & 4

3MNHD12-KLF 12 13 3.00 3.50 3 370 $2,0893MNHD16-KLF 16 17 4.00 4.80 3 410 $2,1233MNHD18-KLF 18 19 4.60 5.60 4 460 $2,2443MNHD24-KLF 24 25 6.20 8.00 5 505 $2,4933MNHD30-KLF 30 31 8.00 10.50 5 540 $2,6553MNHD36-KLF 36 37 9.50 13.00 6 630 $2,9393MNHD42-KLF 42 43 11.00 15.50 6 720 $3,240

1 (DCG)

1MNDCG24-E 24 25 2.50 3.00 N/A 170 $1,2201MNDCG30-E 30 31 3.20 3.80 N/A 190 $1,3421MNDCG36-E 36 37 3.80 4.60 N/A 210 $1,4591MNDCG42-E 42 43 5.20 6.20 N/A 230 $1,5751MNDCG48-E 48 49 5.80 7.00 N/A 250 $1,708

KLAC Bucket

Features• Campatable with matching Klac Coupler (pg. 58)• Does not increase Tip Radius• Hold Machines standard break out Force• Heavy duty bucket profile



59 2018/2019-R1.0 2018/2019-R1.0 60

Mini & BH Mini

& BH

D-Lock Variable Center Hydraulic Coupler


(mm)Base width

(mm)Pin spread range (mm) Weight (lbs) Suggested

Retail

76,1, 15, 2 & 3

HD035-35 35 120 170-223 130 $5,262

HD035-40 40 120 170-223 130 $5,262

HD055-45A 45 144 220-255 130 $5,262

HD055-45D 45 144 230-265 130 $5,262

HD055-45B 45 144 242-277 130 $5,262

HD055-45C 45 144 261-296 130 $5,262

3 & 4HD080-45 45 165 280-315 187 $5,660

HD080-50 50 165 280-315 187 $5,660

HD080-55 55 165 280-315 187 $5,660

4 & 5 HD080-60 60 165 TBD 210 $5,660


Features• Picks up multiple pins centers• Only requires 2 hydraulic lines• Includes machine specific hydraulic kit• Includes (1) set of non-greasable soft bucket pins• Locks front pin in event rear pin is not engaged• Features only 7 moving parts

Tilting Spring Loaded & D-Lock Coupler

Metric TonClass Part Number Type Style Weight

(lbs)Suggested

Retail

1 TSC035 Manual Spring Loaded 160 $6,302

15 & 2TSC055 Manual Spring Loaded 320 $7,669

TD055-45 Hydraulic D-Lock 375 $12,737

3 & 4

TSC080 Manual Spring Loaded 315 $9,028





Features• Minimum of 180° rotation 90° each way (Manual Style)• Minimum of 120° rotation 60° each way (D-Lock Style)• Includes (1) set of non-greasable soft bucket pins• Includes machine specific hydraulic kit for coupler portion• Jumper hoses for tilt funcion required (not included)• Fail-Safe Safety Pin (Manual Style)• Adjustable Springs (Manual Style)• Heavy Duty Actuator•

Spring Loaded style shown. See Full-Sized Section (pg. 22) for D-Lock Style



61 2018/2019-R1.0 2018/2019-R1.0 62

Mini & BH Mini

& BH

Spring Loaded Manual Coupler

Features• Fail Safe Safety Pin• Built to OEM Spacing• Lifting Loops• Adjustable Springs• Includes (1) set of bucket pins

Class Part Number Type Style Weight SuggestedRetail

04 QT-04MN StraightPull Pin

Smaller than 30mm50 $1,499

05 & 76SLQT-05MN Straight Spring Loaded 60 $1,818

SLQT-05MN-CC Combo Spring Loaded 60 $2,127

1 & 15SLQT-1MN Straight Spring Loaded 110 $1,829


2SLQT-2MN Straight Spring Loaded 190 $1,956


3, 4, U1 & U2

SLQT-3MN Straight Spring Loaded 200 $2,301


5SLQT-5MN Straight Spring Loaded 250 $2,640


Mini Multi-Tined Thumb

Features• 120° Standard Rotation• Additional Tine Options Available• Informational Form Must be Completed When Thumbis Working with any Non Werk-Brau Attachment

• Hydraulic Cylinder and Rigid Arms Available• When quoting/ordering please specify if machine isExtenda-a-hoe & if machine has OEM CylinderMount

Class Part Number Description Weight SuggestedRetail

05EZG05MT-2(H/R) 2 Tine Main Pin Hyd or Rigid 75 $2,295

EZG05MT-3(H/R) 3 Tine Main Pin Hyd or Rigid 85 $2,355



1, 15 & 2







4EZG4MT-2H 2 Tine Main Pin Hyd 320 $3,998

EZG4MT-3H 3 Tine Main Pin Hyd 340 $4,105


5EZG5MT-2H 2 Tine Main Pin Hyd 350 $4,412





63 2018/2019-R1.0 2018/2019-R1.0 64

Mini & BH Mini

& BH

Features• 120° Standard Rotation• Additional Tine Options Available• Informational Form Must be Completed When Thumbis Working with any Non Werk-Brau Attachment

• Hydraulic Cylinder and Rigid Arms Available• When quoting/ordering please specify if machine isExtenda-a-hoe & if machine has OEM CylinderMount


U1 & U2

EZG3ML-(H/R) Toe Plate use on standard stick 260 $3,666

EZG3MT-2(H/R) Multi-tine EZ-Grip (Specify width) 275 $3,666



Special

EZG580TM-LH/R) Toe Plate use on standard stick 260 $3,596

EZG580TM-M(H/R) Multi-tine Ez-Grip (Specify width) 275 $3,740

EZG580SM-L(H/R) EZ-Grip for use on standard stick 260 $3,474

EZG580SM-M(H/R) Multi-tine Ez-Grip (Specify width) 275 $3,616

*EZG-590N-S(H/R) Multi-tine Ez-Grip (Specify width) 275 $3,474

*EZG-590N-E Multi-tine Ez-Grip (Specify width) 275 $3,613

*

**EZG-5318-64(H/R) Stick Mounted Hyd Multi Tine 195 $3,125

*

Progressive Link Hydraulic Multi-Tined

Features• 180° Standard Rotation• Linkage is self contained (not throughstick linkage)

• Informational Form Must be CompletedWhen Thumb is working With any NonWerk-Brau Attachment


1, 15& 2

EZG1P-2 2 Tine Pro Link 200 $4,880


3EZG3P-2 2 Tine Pro Link 300 $5,357











65 2018/2019-R1.0 2018/2019-R1.0 66

Mini & BH Mini

& BH

Stick Mounted Multi-Tined Thumb

Class Part Number Style TipRadius

TineWidth Weight Suggested

Retail

1, 15 & 2

EZG1-TC3-32H=Hydraulic

R= Rigid Arm

32” 8-1/2” 125 $2,195

EZG1-TC3-36 36” 8-1/2” 135 $2,223

EZG1-TC3-38 38” 8-1/2” 138 $2,253

3, 4 & 5

EZG3-TC3-42H=Hydraulic

R= Rigid Arm

42-1/2” 11” 275 $3,022

EZG3-TC3-46 46” 11” 275 $3,097

EZG3-TC3-50 50-1/2” 11” 310 $3,165

Features• 131° Standard Rotation• Standard Design For Quick Delivery• Easy Installation• Not recommended for machines with couplers

Part Number Weight Fitting SuggestedRetail

450214 3 8 SAE Oring $93

Diverter Valve

Features• Clean change from one attachment to another• Helps eliminates drift

Ripper

Features• Heavy Duty Ripper Shank• Extra Heavy Duty Upper Channel• Optimized Arc for Best Rip

Class Part Number Length Width Tooth Approx.

WeightSuggested

Retail

04 & 05 WBR04 18” 1” (1) 8623 95 $1,040

76,1 & 15 WBR05 24" 1” (1) 8623 125 $1,120

U1, U2, 2, 3 & 4 WBR1 24" 1-1/2” (1) 6Y3222T 225 $1,308

5 WBR2 24" 2” (1) 6Y3222T 250 $1,744




67 2018/2019-R1.0 2018/2019-R1.0 68

Mini & BH Mini

& BH

Wheel CompactorFeatures• Multiple Wheels• Foot Pads Standard• Offset Wheels For Better Compaction• High Quality Bearings Used• Includes Blade

Class Part Number Width # of Wheels Wheel Diam Weight Suggested

Retail

05, 76, 1, 15, & 2

WBC0512-2 12” 2 22” 375 $2,764

WBC0518-2 18” 3 22” 550 $3,187

WBC0524-2 24” 4 22” 725 $4,461

3, 4, 5, U2 & U1

WCBH18-2 18” 3 28” 1,000 $5,206

WCBH24-2 24” 3 28” 1,100 $5,420


Pavement Removal BucketFeatures• Ribbed Bottom to Prevent Denting• Designed for Moving Concrete Slabs andAsphalt Removal


Class Part Number Bucket Width

No./Style Teeth Weight Suggested

Retail

1 & 15PRB118 18” (3) 8330 275 $1,449

PRB124 24” (4) 8330 370 $1,785

2PRB218 18” (3) 8330 400 $1,940

PRB224 24” (4) 8330 600 $2,212

3, 4, U2 & U1PRB324 24” (4) 6Y3222 750 $2,163

PRB336 36” (5) 6Y3222 835 $2,667

5PRB424 24” (4) 6Y3222 950 $2,408

PRB436 36” (4) 6Y3222 750 $3,497



69 2018/2019-R1.0 2018/2019-R1.0 70

Mini & BH Mini

& BH

Grading/Grapple Rake

Features• High Strength Serrated Tines• Channel Used Throughout for Strength• Work With Thumb For Grappling Action

• Thumb not included in Pricing• Must add corresponding Thumb (EZG) tomake complete Grapple

Class Part Number Width No. of Tines Weight SuggestedRetail

1 & 151GR18 18” 3 200 $1,449

1GR24 24” 5 250 $1,694

U1, U2, 2, & 3

2GR24 24” 3 275 $1,957

2GR36 36” 5 320 $2,069

2GR42 42” 5 350 $2,244

4 & 54GR36 36” 5 350 $2,175

4GR42 42” 5 390 $2,388

4GR48 48” 5 425 $2,550


Hangers, Flat Plates & Hammer AdaptorsFeatures• Standard OEM Set up• Hanger Blanks: Loose Set of Ears• Hangers on a Flat Plate: Ears Welded to a Plate• Hangers Drilled for Hammer: Ears on a Plate with

holes drilled to specific hammer/auger/compactorpattern


04, 05, & 76

05MN-HGS Hangers Only 20 $466

05MN-HFP Hangers on a Flat Plate 35 $548

05MN-HHM Hangers drilled for hammer 35 $715

1 & 1515MN-HGS Hangers Only 40 $661


15MN-HHM Hangers drilled for hammer 60 $943

2, 3, U1 & U2

3MN-HGS Hangers Only 45 $780


3MN-HHM Hangers drilled for hammer 65 $1,100

4 & 54MN-HGS Hangers Only 50 $818


4MN-HHM Hangers drilled for hammer 70 $1,148

Bobcat X-Change 6737698 X-Change Adapter 70 $756




1/16 yard (Less than 4500 lb.) COMPACT EXCAVATOR BUCKETS & COUPLERS

BUCKETS

Gannon Pin-On

Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

GannonQuick Change

Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

HEAVY-DUTY

15

14

HDM15-9 0.59 65 0.625 2 $ 702 HEAVY-DUTY

15

14

HDM15-9 0.59 57 0.625 2 $ 653

HDM15-12 1.08 77 0.625 3 765 HDM15-12 1.08 65 0.625 3 716

HDM15-16 1.26 87 0.625 4 852 HDM15-16 1.26 75 0.625 4 777

HDM15-18 1.45 92 0.625 4 878 HDM15-18 1.45 80 0.625 4 815

HDM15-20 1.75 100 0.625 4 941 HDM15-20 1.75 85 0.625 4 866

HDM15-24 2.05 108 0.625 4 1,016 HDM15-24 2.05 92 0.625 4 903

Gannon Pin-OnBolt-On

Cutting Edge Gannon Quick ChangeBolt-On

Cutting Edge

DITCHING &GRADING

15

14

HDM15-30 2.25 135 Standard $ 991

DITCHING &GRADING

15

14

HDM15-30 2.25 130 Standard $ 866

HDM15-36 3.00 150 Standard 1,091 HDM15-36 3.00 145 Standard 953

COUPLERS

Gannon Quick Change Style / DescriptionWt.

(lbs.)List

Price

QUICK CHANGE

Quick Change 20 $ 859

Rev. 4/9/18

1/8 yard (4,500 to 9,000 lb.) COMPACT EXCAVATOR BUCKETS & COUPLERS

BUCKETS

Gannon Pin-On

Style / Width

Cap.Cu. Ft.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

Wain-Roy QC(Original, XLS)

Style / Width

Cap.Cu. Ft.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

HEAVY-DUTY

30.4

27.8

HDM30-10 1.4 163 0.75 3 $ 682 HEAVY-DUTY

31.6

28.6

HDM30-10 1.4 155 0.75 3 $ 694HDM30-12 1.6 168 0.75 3 743 HDM30-12 1.6 160 0.75 3 731HDM30-16 2.5 184 0.75 3 804 HDM30-16 2.5 176 0.75 3 792HDM30-18 2.8 199 0.75 4 840 HDM30-18 2.8 190 0.75 4 828HDM30-20 3.4 213 0.75 4 889 HDM30-20 3.4 203 0.75 4 877HDM30-24 4.0 246 0.75 5 926 HDM30-24 4.0 235 0.75 5 926HDM30-30 5.2 302 0.75 6 987 HDM30-30 5.2 296 0.75 6 974HDM30-36 6.4 362 0.75 7 1,145 HDM30-36 6.4 351 0.75 7 1,133

Optional Welded Side Cutter Extensions, Add: 174 Optional Welded Side Cutter Extensions, Add: 174

Gannon Pin-On Wain-Roy Quick Change (XLS)CEMETERY /BELLHOLE

27.0

17.5

18-12 1.5 146 0.75 3 $ 991 CEMETERY /BELLHOLE

1006242-12 2.0 198 0.75 3 $ 97218-18 2.5 180 0.75 4 1,170 1006242-16 3.0 211 0.75 3 1,09118-24 3.7 214 0.75 5 1,323 1006242-18 3.5 225 0.75 4 1,15218-30 4.9 252 0.75 6 1,425 1006242-24 5.0 253 0.75 5 1,30418-36 6.0 291 0.75 7 1,530 1006242-30 6.5 281 0.75 6 1,407

1006242-36 8.0 295 0.75 7 1,511

Gannon Pin-OnReversible

BOCE Wain-Roy Quick Change (XLS)Reversible

BOCE

DITCHING &GRADING

18

25

DGM45-24 4.0 252 Standard $ 1,291 DITCHING &GRADING

18

25

DGM45-24 4.0 238 Standard $ 999

DGM45-30 5.2 298 Standard 1,389 DGM45-30 5.2 283 Standard 1,060




Note: Optional drain holes in side plate or backsheet. Note: Optional drain holes in side plate or backsheet.

COUPLERS

CF Mechanical Quick Latch Style / Description

Wt.(lbs.)

ListPrice CF Direct Pin Style / Description

Wt.(lbs.)

ListPrice

MECHANICALQUICK COUPLER

18

11

Mechanical (with pin kit) 85 $ 2,060

18

11

DIRECT PINCOUPLER Mechanical

(with single pin kit) 54 $ 1,220

Jump latch 2,266 Jump latch 1,343

COUPLER PIN KIT 47 � COUPLER PIN KIT (SINGLE PIN) 15 �

Gannon Eliminator Wain-Roy Quick Change (XLS)MANUAL RELEASE

Manual release (Accepts 025, 026,027 style buckets and attachments)

70 $ 879

MANUAL RELEASEManual release(Fits all Original andXLS style buckets andattachments)

70 $ 879

Rev. 4/9/18

� Call for pricing.

1/8 yard (9,000 to 12,500 lb.) COMPACT EXCAVATOR BUCKETS & COUPLERS

BUCKETS

GannonPin-On

Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

Wain-Roy QC(XLS)

Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

HEAVY-DUTY

34.8

33.8

HDM45-12 2.5 205 0.75 3 $ 1,084 HEAVY-DUTY

35.0

35.3

HDM45-12 2.5 190 0.75 3 $ 780HDM45-16 3.4 245 0.75 3 1,121 HDM45-16 3.4 214 0.75 3 840HDM45-18 4.2 253 0.75 4 1,145 HDM45-18 4.2 238 0.75 4 865HDM45-24 6.0 302 0.75 5 1,291 HDM45-24 6.0 284 0.75 5 962HDM45-30 8.1 350 0.75 6 1,389 HDM45-30 8.1 330 0.75 6 1,072HDM45-36 10.1 398 0.75 7 1,583 HDM45-36 10.1 374 0.75 7 1,194

Optional Welded Side Cutter Extensions, Add: 174 Optional Welded Side Cutter Extensions, Add: 174

Gannon Pin-On Wain-Roy Quick Change (XLS)CEMETERY /BELLHOLE

27.0

17.5

18-12 1.5 146 0.75 3 $ 991 CEMETERY /BELLHOLE

1006242-12 2.0 198 0.75 3 $ 97218-18 2.5 180 0.75 4 1,170 1006242-16 3.0 211 0.75 3 1,09118-24 3.7 214 0.75 5 1,323 1006242-18 3.5 225 0.75 4 1,15218-30 4.9 252 0.75 6 1,425 1006242-24 5.0 253 0.75 5 1,30418-36 6.0 291 0.75 7 1,530 1006242-30 6.5 281 0.75 6 1,407

1006242-36 8.0 295 0.75 7 1,511


BOCE Wain-Roy Quick Change (XLS)Reversible

BOCE

DITCHING &GRADING

18

25

DGM45-24 4.0 252 Standard $ 1,291 DITCHING &GRADING

18

25

DGM45-24 4.0 238 Standard $ 999





Note: Optional drain holes in side plate or backsheet. Note: Optional drain holes in side plate or backsheet.

COUPLERS


Wt.(lbs.)


Wt.(lbs.)

ListPrice


18

11


18

11




Gannon

Eliminator Wain-Roy Quick Change (XLS)MANUAL RELEASE

Manual release (Accepts 025, 026,027 style buckets and attachments)

70 $ 879

MANUAL RELEASEManual release(Fits all Original andXLS style buckets andattachments)

70 $ 879

Rev. 4/9/18

�

1/4 yard (12,500 to 16,000 LB) COMPACT EXCAVATOR BUCKETS & COUPLERS

BUCKETS

Gannon Pin-On

Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice


Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

EXTRAHEAVY-DUTY

38.5

34.7

HD1-12 3.3 299 1.00 3 $ 1,041 EXTRAHEAVY-DUTY

38.5

37.8

HD1-12 3.3 245 1.00 3 $ 945HD1-16 4.2 330 1.00 3 1,107 HD1-16 4.2 295 1.00 3 1,018HD1-18 5.0 353 1.00 4 1,159 HD1-18 5.0 310 1.00 4 1,055HD1-24 7.2 415 1.00 5 1,314 HD1-20 6.1 347 1.00 4 1,141HD1-30 9.5 470 1.00 5 1,445 HD1-24 7.2 370 1.00 5 1,202HD1-36 11.8 525 1.00 6 1,601 HD1-30 9.5 425 1.00 5 1,325

HD1-36 11.8 475 1.00 6 1,472

Gannon Pin-On Wain-Roy Quick Change (Original, XLS)EXTRA

HEAVY-DUTY

24

29

STR1-12 2.8 250 1.00 3 $ 1,243 EXTRAHEAVY-DUTY

33.9

34.8

STR1-12 2.8 235 1.00 3 $ 1,159STR1-16 3.6 293 1.00 3 1,308 STR1-16 3.6 278 1.00 3 1,220STR1-18 4.2 310 1.00 4 1,360 STR1-18 4.2 295 1.00 4 1,270STR1-24 6.0 364 1.00 5 1,471 STR1-24 6.0 349 1.00 5 1,374STR1-30 7.8 415 1.00 5 1,581 STR1-30 7.8 400 1.00 5 1,478STR1-36 9.7 465 1.00 6 1,711 STR1-36 9.7 450 1.00 6 1,601

Note: Designed for zero tail spin machines. Note: Designed for zero tail spin machines.

Gannon Pin-On Wain-Roy Quick Change (Original, XLS)HIGH CAP. EXTRA

HEAVY-DUTY

43.5

41.2

HC1-12 4.2 338 1.00 3 $ 1,093 HIGH CAP. EXTRAHEAVY-DUTY

44.1

42.2

HC1-12 4.2 298 1.00 3 $ 993

HC1-16 5.6 375 1.00 3 1,159 HC1-16 5.6 335 1.00 3 1,068

HC1-18 6.5 405 1.00 4 1,223 HC1-18 6.5 365 1.00 4 1,104

HC1-24 9.5 480 1.00 5 1,380 HC1-24 9.5 435 1.00 5 1,251

HC1-30 12.5 541 1.00 5 1,524 HC1-30 12.5 486 1.00 5 1,374

HC1-36 15.6 613 1.00 6 1,705 HC1-36 15.6 563 1.00 6 1,534

Gannon Pin-On Wain-Roy Quick Change (Original, XLS)SEVERE-DUTY

38.5

34.7

SD1-12 3.3 321 1.00 3 $ 1,159 SEVERE-DUTY

38.5

37.8

SD1-12 3.3 281 1.00 3 $ 1,079SD1-16 4.2 357 1.00 3 1,223 SD1-16 4.2 317 1.00 3 1,141SD1-18 5.0 375 1.00 4 1,263 SD1-18 5.0 335 1.00 4 1,177SD1-24 7.2 434 1.00 5 1,419 SD1-24 7.2 389 1.00 5 1,325SD1-30 9.5 483 1.00 5 1,562 SD1-30 9.5 443 1.00 5 1,460SD1-36 11.8 547 1.00 6 1,718 SD1-36 11.8 497 1.00 6 1,607


BOCE Wain-Roy QC (Original, XLS)Reversible

BOCE

DITCHING &GRADING

21.3

25.5

72N-30 5.3 340 Standard $ 1,528 DITCHING &GRADING

22

23

30 6.1 310 Standard $ 1,34972N-36 7.3 383 Standard 1,610 36 8.1 350 Standard 1,42272N-42 8.8 430 Standard 1,803 42 9.6 390 Standard 1,59572N-48 10.3 456 Standard 1,982 48 11.1 435 Standard 1,75472N-54 11.7 510 Standard 2,202 54 12.5 480 Standard 1,95172N-60 13.2 545 Standard 2,381 60 14.0 525 Standard 2,11072N-72 16.1 628 Standard 2,835 72 17.0 615 Standard 2,514

Note: Optional drain holes in side plate or backsheet. Note: 30” & 36” wide buckets use a different profile.Optional drain holes in side plate or backsheet.

Gannon Pin-OnLip Size

(in.)No.

Teeth Wain-Roy QC (Original, XLS)Lip Size

(in.)No.

Teeth

CEMETERY /BELLHOLE

28.8

19.4

02A-12 1.9 200 1.00 3 $ 1,110 CEMETERY /BELLHOLE

12 2.0 165 1.00 3 $ 1,39502A-18 2.8 250 1.00 4 1,278 16 2.7 185 1.00 3 1,44602A-24 4.2 325 1.00 5 1,446 18 3.0 195 1.00 3 1,47202A-30 5.6 400 1.00 6 1,562 24 4.4 250 1.00 4 1,52402A-36 7.4 450 1.00 7 1,679 30 5.9 285 1.00 6 1,59502A-38 7.9 468 1.00 7 1,808 36 7.3 330 1.00 7 1,66602A-40 8.4 476 1.00 8 1,898

Rev. 4/9/18

1/4 yard (12,500 to 16,000 LB) COMPACT EXCAVATOR BUCKETS & COUPLERS (Continued)

BUCKETS (Continued)


Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

RIPPER 12 3.2 305 1.00 3 $ 2,343

16 4.3 340 1.00 5 2,551

18 4.9 356 1.00 5 2,619

24 6.5 405 1.00 5 2,907

Note: Bucket sizes shown are nominal. The Ripper Bucket will cut approximately 2 inches more than the nominal advertised width.

�

COUPLERS


Wt.(lbs.)


Wt.(lbs.)

ListPrice


18

11


18

11




� Gannon

Eliminator Wain-Roy Quick Change (XLS)MANUAL RELEASE Manual release

(Fits all Original stylebuckets and attachments,also accepts 030 stylebuckets and attachments)

198 $ 1,146

MANUAL RELEASEManual release (Fits all Original and XLS style buckets and attachments)

150 $ 1,146

Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)HYDRAULIC RELEASE Hydraulic coupler,

pin kit and selectedcomponents(Fits all Original and XLS style buckets and attachments)

175 $ 3,435

SWINGER W/ MANUAL BUCKET RELEASE Manual release

swinger coupler(Fits all Original and XLS style buckets and attachments)

240 $ 3,557

Note: Hydraulic components include valve, switch box & wiring, and hoses &connections between our valve & cylinder. Dealer is responsible for hosesfrom valve to drain (tank) and to the bucket cylinder for power.

Note: Dealer-supplied hydraulics. When providing the valve, controls & lines, besure to use two 3450 PSI relief valves. The Hydraulic Swinger Coupler is 18 inches wide. Digging depth is limited when a narrower bucket is used.

Wain-Roy Direct PinSWINGER COUPLER W/DIRECT

PIN COUPLER INTERFACE

Mechanical, with single pin kit 240 $ 3,557

Rev. 4/9/18

COMPACT EXCAVATOR ATTACHMENTS & SPECIALTY BUCKETS

SPECIALTY BUCKETS & ATTACHMENTS

Weight ClassWain-Roy Pin-On

Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

Opening(in.)

ListPrice


Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

Opening(in.)

ListPrice

1/4 yd.(12.5K – 16K)

JAW24 7.6 660 41 $ 6,727

JAW24 7.6 650 41 $ 6,648

30 9.7 740 41 7,421 30 9.7 730 41 7,359

Note: For Hydraulic Kit availability & pricing, contact Dealer Services. If you are providing the valve, controls & lines, be sure to use two 3450 PSI relief valves.

Wain-Roy Wain-Roy

1/4 yd.(12.5K – 16K)

RIPPER TOOTHJAW ATTACHMENT

180 $ 1,177

5’ BACKFILL BLADEJAW ATTACHMENT

60 165 $ 1,312

Weight Class Wain-Roy Pin-OnStyle /Width

Cap.Cu. Ft.

Wt.(lbs.)

ListPrice Wain-Roy QC (XLS)

Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

ListPrice

1/8 yd.(9K – 12.5K)

HDM45

TILTING BUCKET 24 4.0 470 $ 3,986 TILTING BUCKET 24 4.0 440 $ 3,802

36 6.2 530 4,201 36 6.2 500 4,022

42 7.6 560 4,354 42 7.6 527 4,171

48 8.8 560 4,477 48 8.8 557 4,292

1/4 yd.(12.5K – 16K)

HD1

TILTING BUCKET48 11.9 865 6,127

TILTING BUCKET48 11.9 788 5,881

60 15.1 1010 6,457 60 15.1 928 6,212

Note: 45� rotation. Bolt-on edge standard. Compact excavator must be equipped with valve and lines down to end of dipperstick. Valve must have port reliefs.

CF Pin-OnNo.

Teeth Wain-Roy QC (Original, XLS)No.

Teeth

1/4 yd. *(12.5K – 16K)

PAVEMENT SLABREMOVAL 18 3 560 $ 2,900

PAVEMENT SLABREMOVAL 18 4 540 $ 2,865

24 4 596 3,071 24 4 575 3,044

30 5 634 3,244 30 5 610 3,223

Note: See compact excavator buckets, specific weight class section for tooth options available.

*

Gannon Pin-On Wain-Roy Quick Change (Original, XLS)

1/4 yd.(12.5K – 16K)

RAILROAD / CRIBBING

RR-8 2 205 $ 1,399

RAILROAD / CRIBBING

8 2 190 $ 1,392


Rev. 4/9/18

COMPACT EXCAVATOR ATTACHMENTS & SPECIALTY BUCKETS (Continued)

SPECIALTY BUCKETS & ATTACHMENTS (Continued)

Weight ClassWain-Roy QC (Original, XLS) **

Style /Width

Cap.Cu. Ft.

Wt.(lbs.)

ListPrice

Wain-Roy QC (Original, XLS) **

Style /Width

Wt.(lbs.)

ListPrice

1/4 yd. *(12.5K – 16K)

“V” DITCHINGBUCKET

12 x 56 x45� 2 365 $ 1,717

5’ GRADING &BACKFILL BLADE

60 165 $ 1,460


*

CF Pin-On Teeth Wain-Roy QC (Original, XLS) Teeth

1/8 yd. (4.5K – 9K)RIPPER TOOTH 199 $ 1,349

RIPPER TOOTH1003035 106 $ 1,338

1/8 yd. (9K – 12.5K) 199 1,349 1003035 106 1,338

1/4 yd. (12.5K – 16K) 009004 225 1,595 1005129 220 1,582

THUMBS (MATERIAL CLAMPS)

Weight Class CF Pin-OnWt.

(lbs.)List

PriceWain-Roy Quick Change

Wt.(lbs.)

ListPrice

Wain-Roy Quick Change

Wt.(lbs.)

ListPrice

1/8 yd. (4.5K – 9K) HDM30WELD-ON RIGID

118 $ 1,104WELD-ON HYDRAULIC

125 $ 1,877HYDRAULIC DIRECT,MAIN PIN (NO LINKS)

CUSTOMDESIGN

125 $ 2,478

1/8 yd. (9K – 12.5K) HDM45 187 1,828 220 2,993 190 2,674

1/4 yd. (12.5K – 16K) HD1 187 1,828 220 2,993 350 3,446

GRAPPLES

Weight ClassWain-Roy QC(Original, XLS) Opening (in.)

Width AcrossTeeth (in.)

Wt.(lbs.)

ListPrice


Opening(in.)

Width AcrossTeeth (in.)

Wt.(lbs.)

ListPrice

1/4 yd.(12.5K – 16K)

HYDRAULIC58 24 605 $ 5,899

RIGID60 24 695 $3,164

Includes Anchor Mounting Kit

If used w/Swinger, Lockout Kit is required, P/N 108621 215

Rev. 4/9/18

CASECX75, CX80

DEERE/HITACHI75, 85

KOMATSUPC88, PC95

TAKEUCHITB180

TEREXTW85

VOLVOECR88

9MT (16,000 to 22,000 LB) EXCAVATOR BUCKETS & COUPLERS

BUCKETS

GannonPin-On

Style /Width

Cap.Cu. Yd.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

Wain-RoyQuick Change(Original, XLS)

Style /Width

Cap.Cu. Yd.

Wt.(lbs.)

Lip Size(in.)

No.Teeth

ListPrice

HEAVY-DUTY

32

38

HD2-16 0.27 547 1.25 3 $ 1,989 HEAVY-DUTY

32

38

HD2-16 0.27 535 1.25 3 $ 1,877

HD2-18 0.30 592 1.25 3 2,029 HD2-18 0.30 575 1.25 3 1,923

HD2-24 0.46 708 1.25 4 2,311 HD2-24 0.46 685 1.25 4 2,183

HD2-30 0.59 819 1.25 5 2,505 HD2-30 0.59 785 1.25 5 2,367

HD2-36 0.72 896 1.25 6 2,724 HD2-36 0.72 860 1.25 6 2,576

HD2-42 0.86 1058 1.25 6 2,956 HD2-42 0.86 939 1.25 6 2,796

HD2-48 1.01 1086 1.25 8 3,175 HD2-48 1.01 1015 1.25 8 3,005

CF Pin-OnReversible 0.75” BOCE,

Add: Wain-Roy Quick Change (Original, XLS)Reversible

BOCE

DITCHING &GRADING

35.4

36.8

3LD-36 0.48 425 1.00 $ 338 $ 1,875 DITCHING &GRADING

33

28

36 0.49 710 Standard $ 2,097

3LD-42 0.57 461 1.00 363 2,058 48 0.67 740 Standard 2,698

3LD-48 0.66 497 1.00 387 2,270 60 0.81 820 Standard 3,239

3LD-54 0.76 528 1.00 399 2,494

3LD-60 0.85 559 1.00 423 2,731

Note: Optional drain holes in side plate or backsheet.

Rev. 4/9/18

9MT (16,000 to 22,000 LB) EXCAVATOR BUCKETS & COUPLERS (Continued)

COUPLERS

CF Mechanical Quick Latch Style / DescriptionWt.

(lbs.)List

Price CF Direct Pin Style / DescriptionWt.

(lbs.)List

Price


23

13


23

13




� Gannon

Eliminator Wain-Roy QC (XLS)

MANUAL RELEASE

Manual release (Fits all Original style buckets andattachments)

299 $ 2,171

MANUAL RELEASE

Manual release (Fits all Original andXLS style buckets and attachments)

303 $ 2,171

Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)

HYDRAULIC RELEASE Hydraulic coupler, pin kit and selectedcomponents(Fits all Original andXLS style buckets and attachments)

330 $ 4,907

MANUAL RELEASE SWINGERManual releaseswinger coupler(Fits all Original andXLS style buckets and attachments)

400 $ 6,501



Wain-Roy Direct PinSWINGER COUPLER W/DIRECT

PIN COUPLER INTERFACE

Mechanical, with single pin kit 400 $ 6,501

TOOTH STYLES

HensleyGeneric

Additional Tooth Availability (Price per Tooth)

Edge Size Standard Hensley CAT Esco Metalogenia

1.00” Manufacturer Specified Teeth & Adapter — X160 $ 29 1U3202 $ 29 V19SYL $ 31 MG15U $ 36

1.25”Upgrade Manufacturer Specified Teeth & Adapter $ 7 X220 $ 39 1U3302 $ 70 V23SYL $ 62 MG15U $ 44

Rev. 4/9/18

CASECX130, CX135

CATERPILLAR311, 312

DEERE/HITACHI120, 135

KOMATSUPC130

TEREXTW110, TW130

VOLVOEC140


CF Pin-On Style / WidthCap.

Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList

Price CF Pin-On Style / WidthCap.

Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList

Price

STANDARDCAPACITY

HEAVY-DUTY

43.6

50.5

CF120X150-18 0.29 714 1.25 3 $ 2,932 HIGHCAPACITY

HEAVY-DUTY

55.2

52.0

CF125X150-18 0.33 980 1.25 3 $ 3,825

CF120X150-20 0.33 792 1.25 3 3,052 CF125X150-20 0.38 1025 1.25 3 4,069

CF120X150-24 0.42 893 1.25 4 3,298 CF125X150-24 0.49 1114 1.25 4 4,199

CF120X150-30 0.57 1066 1.25 4 3,683 CF125X150-30 0.66 1151 1.25 4 4,437

CF120X150-36 0.73 1081 1.25 5 3,949 CF125X150-36 0.83 1261 1.25 5 4,930

CF120X150-42 0.88 1230 1.25 5 4,431 CF125X150-42 1.01 1390 1.25 5 5,666

CF120X150-48 1.04 1312 1.25 6 4,749 CF125X150-48 1.19 1499 1.25 6 5,966

STD. CAPACITYEXTRA

HEAVY-DUTY

43.6

50.5

CF120X250-18 0.29 792 1.25 3 $ 3,144 HIGH CAPACITYEXTRA

HEAVY-DUTY

55.2

52.0

CF125X250-18 0.33 993 1.25 3 $ 4,081

CF120X250-20 0.33 835 1.25 3 3,275 CF125X250-20 0.38 1055 1.25 3 4,186

CF120X250-24 0.42 938 1.25 4 3,535 CF125X250-24 0.49 1364 1.25 4 4,396

CF120X250-30 0.57 1059 1.25 4 3,877 CF125X250-30 0.66 1472 1.25 4 4,787

CF120X250-36 0.73 1141 1.25 5 4,197 CF125X250-36 0.83 1570 1.25 5 5,225

CF120X250-42 0.88 1299 1.25 5 4,774 CF125X250-42 1.01 1651 1.25 5 5,881

CF120X250-48 1.04 1441 1.25 6 5,078 CF125X250-48 1.19 1689 1.25 6 6,081

STD. CAPACITYSEVERE-DUTY

43.6

50.5

CF120X350-18 0.29 1179 1.50 3 $ 3,746 HIGH CAPACITYSEVERE-DUTY

55.2

52.0

CF125X350-18 0.33 1509 1.50 3 $ 5,069

CF120X350-20 0.33 1205 1.50 3 3,886 CF125X350-20 0.38 1554 1.50 3 5,363

CF120X350-24 0.42 1295 1.50 3 4,171 CF125X350-24 0.49 1645 1.50 3 5,631

CF120X350-30 0.57 1411 1.50 4 4,525 CF125X350-30 0.66 1761 1.50 4 6,079

CF120X350-36 0.73 1481 1.50 5 4,865 CF125X350-36 0.83 1790 1.50 5 6,225

CF120X350-42 0.88 1727 1.50 5 5,505 CF125X350-42 1.01 1830 1.50 5 7,013

CF120X350-48 1.04 1959 1.50 6 5,794 CF125X350-48 1.19 2309 1.50 6 7,475

Wain-Roy Quick Change (Original, XLS) Wain-Roy Quick Change (Original, XLS)HEAVY-DUTY

44

38

HD3-18 0.33 698 1.25 3 $ 2,870 SEVERE-DUTY

44

38

SD3-18 0.33 715 1.25 3 $ 3,561

HD3-24 0.49 813 1.25 4 3,320 SD3-24 0.49 834 1.25 4 4,011

HD3-30 0.66 901 1.25 4 3,532 SD3-30 0.66 926 1.25 4 4,344

HD3-36 0.83 1011 1.25 5 3,819 SD3-36 0.83 1040 1.25 5 4,741

HD3-42 1.00 1129 1.25 6 4,480 SD3-42 1.00 1156 1.25 6 5,511

HD3-48 1.18 1213 1.25 6 4,693 SD3-48 1.18 1249 1.25 6 5,845

Optional Bolt-On Side Cutter Extensions, Add: 784



BOCE

DITCHING &GRADING

39.5

37.3

1DXS-42 0.62 786 1.00 $ 542 $ 3,137 DITCHING &GRADING

33

28

36 0.49 710 Standard $ 2,097

1DXS-48 0.73 848 1.00 567 3,385 48 0.67 740 Standard 2,698

1DXS-54 0.83 905 1.00 605 3,619 60 0.81 820 Standard 3,239

1DXS-60 0.94 963 1.00 630 3,867 72 1.00 935 Standard 3,544

1DXS-72 1.15 1084 1.00 668 4,596


Rev. 4/9/18

X150 Bucket: Heavier design than most OEM standard buckets. For use in soils containing low percentages of rock, loam and sand.

X250 Bucket: More demanding excavating conditions in clay,gravel, compacted soils and loose rock.

X350 Bucket: Abrasive and high impact applications in shot rock,coral, stratified materials, caliche and highly compacted material.

Bucket Capacities: Bucket capacities are based on IndustryStandard SAE J296 Heaped Capacity; bucket teeth are notincluded in this capacity calculation. For a bucket with teeth add:

� Bucket Capacity with Standard Teeth: Multiply listed bucket capacity x 1.05 (5%)

� Bucket Capacity with Flared Teeth: Multiply listed bucket capacity x 1.15 (15%)


COUPLERS

CF Pin Grabber Style / DescriptionWt.

(lbs.)List

Price CF Pin Grabber Style / DescriptionWt.

(lbs.)List

PriceQUICK-LATCHHYDRAULIC

19.4

29.8 5.5

Hydraulic (with latch,hydraulic kit and pinkit), includes “D-Ring”

725 $ 7,052

QUICK-LATCHMECHANICAL

6.928.1

13.5

Mechanical (with pinkit), includes “D-Ring” 570 $ 5,902


� Gannon

Eliminator Wain-Roy QC (XLS)MANUAL RELEASE

Manual release (Fits all Original style buckets andattachments)

299 $ 2,171

MANUAL RELEASE

Manual release (Fits all Original andXLS style buckets and attachments)

303 $ 2,171

Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)HYDRAULIC RELEASE Hydraulic coupler,

pin kit and selectedcomponents(Fits all Original andXLS style buckets and attachments)

360 $ 5,151

MANUAL RELEASE SWINGERManual releaseswinger coupler(Fits all Original andXLS style buckets and attachments)

400 $ 6,501



OPTIONS AND ADDITIONS TO BASE BUCKET (“D-Ring” bucket lifting eye and horizontal wear bars are standard)

DescriptionList

Price DescriptionList

Price

Vertical wear bars N/C Central Fabricators 6” side cutters (3 bolt) $ 759

“Anti-clatter” bushing assembly $ 277 Central Fabricators 3” wear shrouds (3 bolt) 653

Ear blanks 1,124

TOOTH STYLES

HensleyGeneric




1.50” Manufacturer Specified Teeth & Adapter — X290 $ 41 1U3351 $ 61 V29SYL $ 36MG20U $ 52

MG30U $ 100

1.50”Upgrade

Manufacturer Specified Teeth & Adapter $ 13 X290 $ 54 1U3351 $ 73 V29SYL $ 49MG20U $ 65

MG30U $ 113

Rev. 4/9/18

CASECX160

CATERPILLAR314, 315

DEERE/HITACHI160

KOMATSUPC138, PC160

TEREXTXC140, TW150

VOLVOEC160, EW160



Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList


Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList

Price

55.2

52.0

STANDARDCAPACITY

HEAVY-DUTY

CF150X150-18 0.34 732 1.25 3 $ 3,619

60.1

56.5

HIGHCAPACITY

HEAVY-DUTY

CF155X150-18 0.37 1005 1.25 4 $ 4,119

CF150X150-20 0.42 816 1.25 3 3,881 CF155X150-20 0.45 1045 1.25 4 4,250

CF150X150-24 0.50 900 1.25 4 4,181 CF155X150-24 0.54 1101 1.25 4 4,369

CF150X150-30 0.66 1068 1.25 4 4,355 CF155X150-30 0.73 1182 1.25 4 4,792

CF150X150-36 0.83 1096 1.25 5 4,781 CF155X150-36 0.92 1276 1.25 5 5,223

CF150X150-42 1.01 1238 1.25 5 5,578 CF155X150-42 1.12 1411 1.25 5 5,841

CF150X150-48 1.18 1387 1.25 6 5,929 CF155X150-48 1.31 1499 1.25 6 6,203

55.2

52.0

STD. CAPACITYEXTRA

HEAVY-DUTY

CF150X250-18 0.34 787 1.25 3 $ 3,744

60.1

56.5

HIGH CAPACITYEXTRA

HEAVY-DUTY

CF155X250-18 0.37 1270 1.25 3 $ 4,369

CF150X250-20 0.42 842 1.25 3 3,969 CF155X250-20 0.45 1320 1.25 3 4,393

CF150X250-24 0.50 942 1.25 4 4,206 CF155X250-24 0.54 1390 1.25 4 4,493

CF150X250-30 0.66 1097 1.25 4 4,555 CF155X250-30 0.73 1471 1.25 4 4,880

CF150X250-36 0.83 1198 1.25 5 4,980 CF155X250-36 0.92 1574 1.25 5 5,318

CF150X250-42 1.01 1312 1.25 5 5,791 CF155X250-42 1.12 1687 1.25 5 6,140

CF150X250-48 1.18 1490 1.25 6 6,140 CF155X250-48 1.31 1869 1.25 6 6,503

55.2

52.0


CF150X350-18 0.34 1183 1.50 3 $ 4,381

60.1

56.5

HIGH CAPACITYSEVERE-DUTY

CF155X350-18 0.37 1673 1.50 3 $ 4,977

CF150X350-20 0.42 1255 1.50 3 4,493 CF155X350-20 0.45 1693 1.50 3 5,118

CF150X350-24 0.50 1299 1.50 3 4,943 CF155X350-24 0.54 1720 1.50 3 5,404

CF150X350-30 0.66 1415 1.50 4 5,392 CF155X350-30 0.73 1777 1.50 4 5,828

CF150X350-36 0.83 1493 1.50 5 5,841 CF155X350-36 0.92 1809 1.50 5 6,315

CF150X350-42 1.01 1730 1.50 5 6,290 CF155X350-42 1.12 1862 1.50 5 7,401

CF150X350-48 1.18 1960 1.50 6 6,740 CF155X350-48 1.31 2350 1.50 6 8,050


42

50

HD4-24 0.55 1139 1.50 3 $ 4,954

39

49

HIGH CAPACITYHEAVY-DUTY

STR4-30 0.66 1102 1.25 4 $ 6,203

HD4-30 0.75 1315 1.50 4 5,380 STR4-36 0.83 1230 1.25 5 6,415

HD4-36 0.95 1435 1.50 5 5,578 STR4-42 1.01 1358 1.25 5 6,827

HD4-42 1.16 1629 1.50 5 6,004 STR4-48 1.19 1511 1.25 6 7,239

HD4-48 1.34 1805 1.50 6 6,415




BOCE

DITCHING &GRADING

39.5

37.3

1DXS-42 0.62 781 1.00 $ 568 $ 4,000 DITCHING &GRADING

36 0.50 1025 Standard $ 3,557

1DXS-48 0.73 847 1.00 586 4,010 42 0.60 1050 Standard 3,769

1DXS-54 0.83 907 1.00 616 4,335 48 0.75 1080 Standard 3,969

1DXS-60 0.94 959 1.00 635 4,560 54 0.87 1095 Standard 4,181

1DXS-72 1.15 1087 1.00 676 4,835 60 1.00 1110 Standard 4,393

72 1.13 1220 Standard 4,992


Rev. 4/9/18








COUPLERS


(lbs.)List


(lbs.)List


20.0

32.2 5.5


870 $ 7,744


6.931.9

19.8



Wain-Roy Quick Change (XLS)MANUAL RELEASE

Manual release(Fits all Original andXLS style buckets and attachments)

645 $ 4,637

Wain-Roy Quick Change (XLS) Wain-Roy Quick Change (XLS)HYDRAULIC RELEASE

Hydraulic coupler, pin kit and selectedcomponents(Fits all Original andXLS style buckets and attachments)

675 $ 6,525

SWINGER W/ MANUAL BUCKET RELEASE

Manual releaseswinger coupler(Fits all Original andXLS style buckets and attachments)

950 $ 10,414



OPTIONS AND ADDITIONS TO BASE BUCKET(“D-Ring” bucket lifting eye and horizontal wear bars are standard)

DescriptionList


Price



Ear blanks 1,401

TOOTH STYLES

HensleyGeneric





MG30U $ 100

1.50”Upgrade

Manufacturer Specified Teeth & Adapter $ 13 X290 $ 54 1U3351 $ 73 V29SYL $ 49MG20U $ 65

MG30U $ 113

Rev. 4/9/18

CASECX210, CX225

CATERPILLAR319, 320, 321

DEERE/HITACHI190, 200, 225

KOMATSUPC200, PC228

TEREXTC210, TXC225

VOLVOEW180, EC210



Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList


Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList

Price

60.1

56.5

STANDARDCAPACITY

HEAVY-DUTY

CF200X150-24 0.54 1112 1.50 4 $ 5,079

65.0

58.8

HIGHCAPACITY

HEAVY-DUTY

CF205X150-24 0.60 1289 1.50 4 $ 5,291

CF200X150-30 0.73 1227 1.50 4 5,554 CF205X150-30 0.81 1391 1.50 4 6,040

CF200X150-36 0.92 1350 1.50 5 5,977 CF205X150-36 1.02 1451 1.50 5 6,477

CF200X150-42 1.12 1490 1.50 5 6,415 CF205X150-42 1.23 1596 1.50 5 6,764

CF200X150-48 1.31 1586 1.50 6 6,976 CF205X150-48 1.45 1785 1.50 6 7,401

CF200X150-54 1.51 1720 1.50 6 7,364 CF205X150-54 1.66 2045 1.50 6 7,776

CF200X150-60 1.70 1980 1.50 7 8,100 CF205X150-60 1.88 2305 1.50 7 8,824

60.1

56.5

STD. CAPACITYEXTRA

HEAVY-DUTY

CF200X250-24 0.54 1373 1.50 4 $ 5,416

65.0

58.8

HIGH CAPACITYEXTRA

HEAVY-DUTY

CF205X250-24 0.60 1425 1.50 4 $ 5,852

CF200X250-30 0.73 1481 1.50 4 5,866 CF205X250-30 0.81 1531 1.50 4 6,253

CF200X250-36 0.92 1573 1.50 5 6,091 CF205X250-36 1.02 1651 1.50 5 6,602

CF200X250-42 1.12 1699 1.50 5 6,540 CF205X250-42 1.23 1728 1.50 5 6,902

CF200X250-48 1.31 1793 1.50 6 6,989 CF205X250-48 1.45 1853 1.50 6 7,451

CF200X250-54 1.51 1903 1.50 6 7,439 CF205X250-54 1.66 1965 1.50 6 7,975

CF200X250-60 1.70 2018 1.50 7 8,337 CF205X250-60 1.88 2075 1.50 7 9,148

60.1

56.5


CF200X350-24 0.54 1658 1.50 3 $ 6,300

65.0

58.8


CF205X350-24 0.60 1695 1.50 3 $ 7,204

CF200X350-30 0.73 1760 1.50 4 6,552 CF205X350-30 0.81 1805 1.50 4 7,627

CF200X350-36 0.92 1859 1.50 4 6,995 CF205X350-36 1.02 1943 1.50 4 8,036

CF200X350-42 1.12 2029 1.50 5 7,878 CF205X350-42 1.23 2089 1.50 5 8,400

CF200X350-48 1.31 2197 1.50 5 8,190 CF205X350-48 1.45 2305 1.50 5 9,428

CF200X350-54 1.51 2365 1.50 6 8,528 CF205X350-54 1.66 2410 1.50 6 9,990

CF200X350-60 1.70 2478 1.50 7 9,066 CF205X350-60 1.88 2560 1.50 7 10,586


42

50

HD4-24 0.55 1139 1.50 3 $ 4,954

46

52


HD5-24 0.66 1205 1.50 3 $ 5,691

HD4-30 0.75 1315 1.50 4 5,380 HD5-30 0.90 1370 1.50 4 6,096

HD4-36 0.95 1435 1.50 5 5,578 HD5-36 1.14 1535 1.50 5 6,305

HD4-42 1.16 1629 1.50 5 6,004 HD5-42 1.38 1690 1.50 5 6,709

HD4-48 1.34 1805 1.50 6 6,415 HD5-48 1.63 1845 1.50 6 7,114

Optional Bolt-On Side Cutter Extensions, Add: 699 Optional Bolt-On Side Cutter Extensions, Add: 770



BOCE

DITCHING &GRADING

39.5

37.3

1DXH-42 0.62 866 1.00 $ 568 $ 4,019 DITCHING &GRADING

42 0.60 1050 Standard $ 3,769

1DXH-48 0.73 996 1.00 586 4,031 48 0.75 1080 Standard 3,969

1DXH-54 0.84 1126 1.00 616 4,321 54 0.87 1095 Standard 4,181

3LDLF-54 0.76 770 1.00 616 4,354 60 1.00 1110 Standard 4,393

3LDLF-60 0.85 815 1.25 635 4,410 72 1.13 1220 Standard 4,992

1DXH-60 0.94 1256 1.00 635 4,581

1DXH-72 1.15 1295 1.00 676 4,857


Rev. 4/9/18








COUPLERS


(lbs.)List


(lbs.)List


21.1

34.5 5.5


925 $ 8,332


6.533.5

18.2



Wain-Roy Quick Change (XLS)

�

MANUAL RELEASE


645 $ 4,637

�



675 $ 6,525



950 $ 10,414




DescriptionList


Price



Ear blanks 1,716

TOOTH STYLES

HensleyGeneric




MG30U $ 100

2.00”Upgrade Manufacturer Specified Teeth & Adapter $ 32 X400 $ 114 9W8452 $ 180 V39SYL $ 95 MG40U $ 162

Rev. 4/9/18

CASECX240, CX290

CATERPILLAR324, 329


KOMATSUPC220, PC270

TEREXTXC255, TC260

VOLVOEC230, EC290

Refer to pages 2-8 & 2-10 for additional manufacturers and models.



Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList


Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList

Price

65.0

58.8

STANDARDCAPACITY

HEAVY-DUTY

CF250X150-24 0.60 1390 1.50 3 $ 6,096

71.4

64.7

HIGHCAPACITY

HEAVY-DUTY

CF255X150-24 0.81 1453 1.50 3 $ 6,538

CF250X150-30 0.81 1563 1.50 4 6,550 CF255X150-30 1.08 1731 1.50 4 6,979

CF250X150-36 1.02 1639 1.50 5 6,771 CF255X150-36 1.36 1845 1.50 5 7,408

CF250X150-42 1.23 1779 1.50 5 7,212 CF255X150-42 1.64 1962 1.50 5 7,850

CF250X150-48 1.45 1866 1.50 6 7,666 CF255X150-48 1.93 2068 1.50 6 8,549

CF250X150-54 1.66 2099 1.50 6 8,549 CF255X150-54 2.23 2200 1.50 6 9,187

CF250X150-60 1.88 2169 1.50 7 9,445 CF255X150-60 2.52 2430 1.50 7 9,824

65.0

58.8

STD. CAPACITYEXTRA

HEAVY-DUTY

CF250X250-24 0.60 1540 1.50 3 $ 6,243

71.4

64.7

HIGH CAPACITYEXTRA

HEAVY-DUTY

CF255X250-24 0.81 1765 1.50 3 $ 6,771

CF250X250-30 0.81 1930 1.50 4 6,696 CF255X250-30 1.08 2010 1.50 4 7,212

CF250X250-36 1.02 2075 1.50 5 6,918 CF255X250-36 1.36 2133 1.50 5 7,629

CF250X250-42 1.23 2195 1.50 5 7,359 CF255X250-42 1.64 2279 1.50 5 8,070

CF250X250-48 1.45 2359 1.50 6 7,813 CF255X250-48 1.93 2505 1.50 6 8,770

CF250X250-54 1.66 2600 1.50 6 8,697 CF255X250-54 2.23 2801 1.50 6 9,469

CF250X250-60 1.88 2836 1.50 7 9,592 CF255X250-60 2.52 3000 1.50 7 10,045

65.0

58.8


CF250X350-24 0.60 1658 1.50 3 $ 7,064

71.4

64.7


CF255X350-24 0.81 1735 1.50 3 $ 8,206

CF250X350-30 0.81 2080 1.50 4 7,518 CF255X350-30 1.08 2240 1.50 4 8,451

CF250X350-36 1.02 2179 1.50 4 7,961 CF255X350-36 1.36 2349 1.50 4 9,334

CF250X350-42 1.23 2308 1.50 4 8,402 CF255X350-42 1.64 2547 1.50 4 10,683

CF250X350-48 1.45 2519 1.50 5 9,065 CF255X350-48 1.93 2810 1.50 5 12,106

CF250X350-54 1.66 2699 1.50 6 9,726 CF255X350-54 2.23 3034 1.50 6 12,805

CF250X350-60 1.88 2929 1.50 6 13,087 CF255X350-60 2.52 3265 1.50 7 13,962

Wain-Roy Quick Change (Original, XLS)

46

52


HD5-24 0.66 1205 1.50 3 $ 5,691

HD5-30 0.90 1370 1.50 4 6,096

HD5-36 1.14 1535 1.50 5 6,305

HD5-42 1.38 1690 1.50 5 6,709

HD5-48 1.63 1845 1.50 6 7,114




BOCE

DITCHING &GRADING

50.0

46.4

2DXH-48 1.10 1398 1.25 $ 586 $ 4,720 DITCHING &GRADING

48 0.75 1080 Standard $ 3,969

2DXH-54 1.25 1480 1.25 616 4,967 60 1.00 1110 Standard 4,393

3LDLF-60 0.85 835 1.25 635 4,532 66 1.15 1165 Standard 4,693

2DXH-60 1.43 1562 1.25 635 5,215 72 1.23 1220 Standard 4,992

2DXH-66 1.59 1660 1.25 653 5,464 84 1.45 1340 Standard 5,392

2DXH-72 1.78 1759 1.25 676 5,710

2DXH-84 2.09 1956 1.25 713 6,728


Rev. 4/9/18








COUPLERS


(lbs.)List


(lbs.)List


20.1

33.95.5


1025 $ 9,503


6.533.9

19.6



Pin Grabber Pin Kit Wain-Roy Quick Change (XLS)COUPLER PIN KIT

4P 140 �

MANUAL RELEASE


650 $ 4,992

� Call for pricing.



715 $ 6,869



1000 $ 10,916




DescriptionList


Price



Ear blanks 1,915

TOOTH STYLES

HensleyGeneric



1.50” Manufacturer Specified Teeth & Adapter — X330 N/C 1U3351 $ 46 V33SYL $ 85MG20U $ 37

MG30U $ 85


Rev. 4/9/18

CASECX350

CATERPILLAR328, 336


KOMATSUPC300, PC350

TEREXTXC300, TXC420

VOLVOEC290, EC360



Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList


Cu. Yd.Wt.

(lbs.)Lip Size

(in.)No.

TeethList

Price

71.4

64.7

STANDARDCAPACITY

HEAVY-DUTY

CF300X150-24 0.81 1600 1.50 3 $ 6,770

73.9

70.4

HIGHCAPACITY

HEAVY-DUTY

CF305X150-24 0.87 1900 1.50 3 $ 7,236

CF300X150-30 1.08 1770 1.50 4 7,213 CF305X150-30 1.18 2420 1.50 4 7,434

CF300X150-36 1.36 1872 1.50 4 7,865 CF305X150-36 1.49 2550 1.50 4 8,249

CF300X150-42 1.64 1998 1.50 5 8,750 CF305X150-42 1.82 2710 1.50 5 9,006

CF300X150-48 1.93 2115 1.50 6 9,624 CF305X150-48 2.15 2815 1.50 6 10,056

CF300X150-54 2.23 2215 1.50 6 10,720 CF305X150-54 2.49 2982 1.50 6 11,023

CF300X150-60 2.52 2338 1.50 7 11,816 CF305X150-60 2.83 3089 1.50 7 11,862

CF300X150-66 2.81 2451 1.50 7 12,386 CF305X150-66 3.17 3200 1.50 7 12,933

CF300X150-72 3.10 2573 1.50 7 13,341 CF305X150-72 3.51 3141 1.50 7 13,715

71.4

64.7

STD. CAPACITYEXTRA

HEAVY-DUTY

CF300X250-24 0.81 1836 2.00 3 $ 7,107

73.9

70.4

HIGH CAPACITYEXTRA

HEAVY-DUTY

CF305X250-24 0.87 2400 2.00 3 $ 7,340

CF300X250-30 1.08 1942 2.00 4 7,505 CF305X250-30 1.18 2516 2.00 4 7,538

CF300X250-36 1.36 2057 2.00 4 7,982 CF305X250-36 1.49 2781 2.00 4 8,400

CF300X250-42 1.64 2210 2.00 5 8,786 CF305X250-42 1.82 3020 2.00 5 9,303

CF300X250-48 1.93 2324 2.00 5 9,660 CF305X250-48 2.15 3218 2.00 5 10,281

CF300X250-54 2.23 2557 2.00 6 10,906 CF305X250-54 2.49 3562 2.00 6 11,850

CF300X250-60 2.52 2700 2.00 6 11,990 CF305X250-60 2.83 3660 2.00 6 12,881

CF300X250-66 2.81 2910 2.00 6 12,502 CF305X250-66 3.17 3800 2.00 6 13,109

CF300X250-72 3.10 3140 2.00 7 13,703 CF305X250-72 3.51 4028 2.00 7 14,308

71.4

64.7


CF300X350-24 0.81 2220 2.00 3 $ 7,388

73.9

70.4


CF305X350-24 0.87 2580 2.00 3 $ 8,262

CF300X350-30 1.08 2414 2.00 3 8,016 CF305X350-30 1.18 2850 2.00 3 8,530

CF300X350-36 1.36 2578 2.00 4 8,262 CF305X350-36 1.49 3024 2.00 4 9,252

CF300X350-42 1.64 2897 2.00 4 9,066 CF305X350-42 1.82 3343 2.00 4 10,277

CF300X350-48 1.93 3049 2.00 5 9,939 CF305X350-48 2.15 3469 2.00 5 11,058

CF300X350-54 2.23 3298 2.00 5 11,326 CF305X350-54 2.49 3720 2.00 5 12,677

CF300X350-60 2.52 3456 2.00 6 12,619 CF305X350-60 2.83 3965 2.00 6 13,900

CF300X350-66 2.81 3584 2.00 6 13,633 CF305X350-66 3.17 4105 2.00 6 14,966

CF300X350-72 3.10 3766 2.00 7 15,015 CF305X350-72 3.51 4322 2.00 7 16,405


Add:

DITCHING &GRADING

50.0

46.4

2DXH-48 1.10 1470 1.25 $ 586 $ 4,720

2DXH-54 1.25 1570 1.25 616 4,967

2DXH-60 1.43 1660 1.25 635 5,215

2DXH-66 1.59 1765 1.25 653 5,464

2DXH-72 1.78 1850 1.25 676 5,710

2DXH-84 2.09 2040 1.25 713 6,728


Rev. 4/9/18








COUPLERS


(lbs.)List


(lbs.)List


22.3

39.75.5


1315 $ 10,063


6.541.4

23.0




DescriptionList


Price



Ear blanks 2,441

TOOTH STYLES

HensleyGeneric



1.50” Manufacturer Specified Teeth & Adapter — X330 N/C 1U3352 $ 64 V33SYL $ 85MG20U $ 37

MG30U $ 85

2.00” Manufacturer Specified Teeth & Adapter — X370 $ 77 9W8452 $ 148 V43SYL $ 103 MG40U $ 130


Rev. 4/9/18

EXCAVATOR ATTACHMENTS & SPECIALTY BUCKETS (Continued)


Weight ClassWain-Roy Pin-On

Style /Width

Cap.Cu. Yd.

Wt.(lbs.)

Opening(in.)

ListPrice


Style /Width

Cap.Cu. Yd.

Wt.(lbs.)

Opening(in.)

ListPrice

9MT (16K – 22K)and

12MT (22K – 30K)

JAW 24 0.39 920 51 $ 11,836 JAW 24 0.39 875 51 $ 9,910

30 0.52 1010 51 12,265 30 0.52 975 51 10,217

15MT (30K – 41K)and

20MT (41K – 52K)36 0.74 1800 51 15,895 36 0.74 1800 51 13,970

Wain-Roy Wain-Roy

9MT (16K – 22K)RIPPER TOOTH

JAW ATTACHMENT 275 $ 1,9136’ BACKFILL BLADEJAW ATTACHMENT 72 265 $ 2,546

12MT (22K – 30K) 275 2,021 72 265 2,653

Weight ClassWain-RoyPin-On

Style /Width

Cap. Cu.Yd. Wt. (lbs.)

ListPrice

Wain-Roy QC(XLS)

Style /Width

Cap. Cu.Yd. Wt. (lbs.)

ListPrice

9MT (16K – 22K)and

12MT (22K – 30K)

HYDRAULICTILTING BUCKET

48 0.70 1180 $ 8,285 HYDRAULICTILTING BUCKET

48 0.70 1135 $ 7,979

60 0.90 1367 8,614 60 0.90 1322 8,308

66 1.00 1445 8,702 66 1.00 1400 8,395

72 1.10 1513 8,905 72 1.10 1468 8,597

15MT (30K – 41K),

20MT (41K – 52K)and

25MT (52K – 65K)

60 1.00 1875 10,977 60 1.00 1830 10,671

72 1.13 2400 11,983 72 1.13 2355 11,677

CF Pin-On Weight Class Style / Width Dim “X” (in.) Dim “Y” (in.) Wt. (lbs.) Teeth List Price

RIPPER TOOTH

X

Y

9MT (16K – 22K) CF1R-30 30.0 4.5 260 24 Series $ 1,588

12MT (22K – 30K) CF1.5R-36 36.0 9.6 658 25 Series 3,618

15MT (30K – 41K) 2R-36 36.0 7.9 658 25 Series 3,850

20MT (41K – 52K) 2R-42 42.0 7.9 660 25 Series 3,966

25MT (52K – 65K) 2.5R-42 42.0 7.9 1000 35 Series 5,318

30MT (65K – 95K) 2.5R-36 36.0 6.4 1050 35 Series 5,444

45MT (95K – 110K) 3R-55 55.0 5.5 2201 35 Series 9,223

60MT (110K – 160K) 4R-55 55.0 8.0 2600 39 Series 10,659

80MT (160K – 200K) 4.5R-65 65.0 10.0 3100 39 Series 12,683

120MT (200K +) 8R-55 55.0 17.5 4300 V71 32,335

Wain-Roy Quick Change (Original, XLS)

RIPPER TOOTH

X

9MT (16K – 22K)and

12MT (22K – 30K)47.0 275 T1U3352 $ 2,441

15MT (30K – 41K),

20MT (41K – 52K)and

25MT (52K – 65K)

50.0 770 T702 4,697

Rev. 4/9/18

EXCAVATOR ATTACHMENTS & SPECIALTY BUCKETS (Continued)


Wain-Roy QC(Original, XLS) Weight Class

Style /Width

Wt.(lbs.)

No.Teeth

ListPrice

Wain-Roy QC(Original, XLS) Weight Class

Style /Width

Wt.(lbs.)

ListPrice

“V” DITCHINGBUCKET 9MT (16K – 22K)

18 x 72 x45� 617 3 $ 3,348

5’ GRADING &BACKFILL BLADE 9MT (16K – 22K) 60 235 $ 1,851

12MT (22K – 30K)18 x 72 x

45� 617 3 3,348 12MT (22K – 30K) 60 235 1,851

Note: See excavator buckets, specific weight class section for tooth options available.

THUMBS (MATERIAL CLAMPS)

Central FabricatorsPin-On Style

Wt.(lbs.)

ListPrice Style

Wt.(lbs.)

ListPrice Style

Wt.(lbs.)

ListPrice

12MT (22K – 30K) RIGID, MAIN PIN(NO LINKS)

705 $ 5,299 HYDRAULIC DIRECT,MAIN PIN (NO LINKS)

CUSTOMDESIGN

750 $ 6,860 HYDRAULIC PROGRESSIVE (WITH LINKS)

CUSTOMDESIGN

1050 $ 10,163

15MT (30K – 41K) 800 7,167 900 9,211 1100 10,977

20MT (41K – 52K) 965 8,682 1050 10,058 1200 11,889

25MT (52K – 65K) 1225 9,162 1300 10,378 1600 12,449

30MT (65K – 95K) 1520 10,224 1540 12,260 1920 13,271

45MT (95K – 110K) 2045 11,670 2190 13,997 2720 16,270

9MT (16K – 22K) WELD-ON RIGID 480 $ 3,817 WELD-ON HYDRAULIC 480 $ 4,234

12MT (22K – 30K) 660 4,256 660 6,635

15MT (30K – 41K) 660 4,256 660 6,635

20MT (41K – 52K) 870 4,649 870 7,064

25MT (52K – 65K) 1070 6,194 1070 7,184

30MT (65K – 95K) 1370 6,230 1370 8,026

45MT (95K – 110K) 1504 7,752 1504 9,087

Wain-Roy Quick Change

9MT (16K – 22K)WELD-ON HYDRAULIC

480 $ 3,986HYDRAULIC DIRECT,MAIN PIN (NO LINKS)

CUSTOMDESIGN

600 $ 6,083

12MT (22K – 30K) 615 6,635 750 6,696

Rev. 4/9/18

Documents

SEQ. #770-819 EXCAVATORS August, 2019 E-95 Excavators … · 2020-02-26 · SEQ. #770-819 E-95 Excavators EXCAVATORS DISCOUNT OFF LIST PRICING INFO SPECIFICATION 5.0 August, 2019