5
news september 2015 bondura® Academy bondura® Survey & Maintenance Program OTD2015 Stavanger IADC Asset Integrity & Reliability

september 2015 - Bondura · with new customers and this means a lot to us. As our technology can be adapted to any kind of business or product, we constantly seek new op-portunity

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: september 2015 - Bondura · with new customers and this means a lot to us. As our technology can be adapted to any kind of business or product, we constantly seek new op-portunity

newsseptember 2015

bondura® Academy

bondura® Survey & Maintenance Program

OTD2015 Stavanger

IADC Asset Integrity & Reliability

Page 2: september 2015 - Bondura · with new customers and this means a lot to us. As our technology can be adapted to any kind of business or product, we constantly seek new op-portunity

bondura® technologybondura® technology designs and manufactures pin solutions to customers specifications, based on our patented and DNV GL Type Approved bondura® pin technology.

bondura® has been a leading global supplier of pivot pin technology since 1986. Our strength is the ability to develop new adaptable designs and solutions based on our technology, which give our customers competitive advantage. We achieve this by combining our practical expe-rience from the most demanding industries, operating in the worlds harshest environments with knowledge of the bondura® technology platform and different designs & solutions. Our success is based on knowledge, skilled employ-ees and our unconditional devotion to creating solutions for the future.

We are situated at Bryne, on the south-west coast of Norway.

our new web-siteWe have just got our web-site upgraded! It now includes a lot more information both regarding our products and the different types of areas where we deliver our technology.

Please have a look on www.bondura.no

bondura® academyWith bondura® technology’s expansion worldwide we have seen the need for more in depth know-ledge regarding design and assembly & inspection of the bondura® product line and technology. In this regard we want to give our customers the opportunity to learn more about the bondura®technology in general.

The bondura® academy consists of a theoretical and a practical part. The theoretical part will give you a better understanding of the bondura® technology, which pin goes where and the importance of a correct assembly procedure. In the practical session you can try out the demonstration pins of our most common bondura® designs.

It is highly recommended that everybody involved with assembly and disassembly of the bondura® pins, part take in one of our academy classes. It is bondura® technology’s opinion that use of any un-authoized personnel in assembly or disassembly of the bondura® pin will (at worst) void your warranty.

For more information, please see our web-site or contact us on [email protected].

CEO’s wordWelcome to our bondura® news - we do hope you will appreciate our up-date to you from different areas of our business.

We do appreciate your business and we experience getting into new areas with new customers and this means a lot to us. As our technology can be adapted to any kind of business or product, we constantly seek new op-portunity to let new customers take part in our technology to improve their products and services.

I hope that this newsletter will give you some new ideas about our products and services, and will give you the opportunity to challenge us in finding new product solutions based on our unique technology to your advantage.

Please call or e-mail us on any kind of questions you might have about the bondura® technology and we would be more than happy to support you in your product improvement process.

Have a nice day :)

Ragnar SandveChief Executive Officer

Page 3: september 2015 - Bondura · with new customers and this means a lot to us. As our technology can be adapted to any kind of business or product, we constantly seek new op-portunity

nordicSummer is over and we notice that the activityreally has increased with our customers in the Nordic region. Especially within the main-tenance/aftermarket it seems to be a lot planned for the next few months.

Finland is a country that we find very interesting and who has many different industries where the bondura® pin will be of use. We are lookingforward to meet a handful of new customers in Finland by the end of the year.

We will be visiting Dyrskun in Seljord (NO) from 11th - 13th of September, HI Technology & Industry Expo in Herning (DK) from 23rd - 24th of September, as well as attending with our booth at OTD Stavanger (NO) from 21st - 22nd of October.

bondura® Survey & Maintenance ProgramWe would like to turn your attention to your fleet`s preventive maintenance program, and how our technology, line of products and knowledge will benefit your fleet in this regard. Whenever we meet with new potential customers (that be an OEM or a contractor) to discuss the importance of pin joint design of major operational equipment, it never fails to amaze us how the importance of pin joint de-sign are sometimes overlooked in major operational equipment. Usually not acknowledging all of the additional costs involved with a poorly designed pin joint, at times being more focused on material cost than equipment lifecycle. Maintenance cost, downtime, service procedures, re-certification are all typical issues with a very high price tag. In a worst-case scenario, you could have a major safety hazard on your hands. One seems to forget that the pin connects all the vital and critical joints on most major operational equipment on a drilling rig, offshore support vessel or mining equipment etc. bondura® technology now wants to provide even more of a benefit to the market by establishing and developing a bondura® survey & maintenance program to help contractors identify the critical joints that will benefit from an upgrade. This is where the bondura® value chain brings a significant benefit to your assets.

bond

ura®

tech

nolo

gy e

urop

e europeThis autumn we are very busy in the various European markets. A series of meetings with French ans Spanish manufacturers will start off our major focus in those countries, and we will be looking at all new areas for the bondura® system to be fitted.

Already, our great cooperation with the rides manufacturer Vekoma has made the late parts of summer busy, and there are several interest-ing quotations made towards existing markets in Germany, Holland and the UK.

We to expect OEM’s in both Spain and France to become important parts of our ever growing port-folio before the end of the year, and to complete this autumns’ European journey, a handful of Turkish manufacturers will be visited.

For mechanical maintenance & our BSM program throughout Europe, we have teamed up withHydramech Solutions AS.

Stian BoreSales Manager, Nordic

[email protected]

Arne NordhagenSales Manager, Europe

[email protected]

With its unique and adaptable design and value chain bondura® gives you:

• Field-tested and proved offshore in the harshest environments worldwide for over 29 years!• DNV GL Type Approval• ABS Product Design Assessment Certificate• Full documentation: traceability, MPI report, material certificates• Eliminate wear & tear 100%• Ensure a 360 degree contact surface and 180 degree loadbearing surface between pin & support.• Reduce life expenses of equipment: Operational time of equipment is extended• Quick disassembly• Timesaving installation• Field installation made possible• Repair play and elongation in supports• Extend equipment lifecycle• Ease inspection and service procedures• No need for heat treatment• bondura® Multi Tools - our line of pin pulling tools

We at bondura® technology would like to invite your preventive maintenance team to investigate your fleet needs, develop a project pilot with bondura® technology for critical joints, and experience exactly how this will benefit your fleet and operations in the furure. Please contact us if you have any questions or thoughts regarding our bondura® Survey & Maintenance Program.

OTD2015 StavangerOTD2015 STAVANGER is a multifaceted event for continuous learning and showcasing, with innovation, solutions and tools required to suc-ceed in the accelerating technology race in this increasingly complex business.

Stop by our booth!

Hall E - Booth 4018

Page 4: september 2015 - Bondura · with new customers and this means a lot to us. As our technology can be adapted to any kind of business or product, we constantly seek new op-portunity

bondura® Engineering Dept.The Engineering Dept. is responsible for all design, modelling and drawing of standard pin solutions and special solutions, including maintaining third part certifications (DNV-GL and ABS) and patent issues.

Our standard solutions have been developed during the last 20 years, but the special solutions we develop every day, often in cooperation with our clients. Our technical and engineering staff is: Nina Killingland, Tor Fjeldheim and Øyvind Karlsen, all with an extensive knowledge of pivot pin technology, engineering in general and our clients in special.

A representative from the engineering department is often participating at exhibitions and in meetings with our clients when discussing technical issues, and continuing this process with the clients technical and engineering personell, especially when the issue relates to special design and solutions.

R & DThe bondura® special designs include all non-standard pin solutions required by our customers. Typically can be:- Asymmetric designs- Non-circular pins- Eccentric solutions- Special requirements for operating in wide temperature ranges- Special materials or corrosion protection- Special sub-sea, shipping, aeronautic and space technology requirements

bondura® technology is constantly developing our technology and generating new patents, both by improvements of existing bondura® technology and by developing new solutions. Taking into account today’s global situation we all see the need for a continously development and new thinking within not only the oil&gas and offshore industries, but most industries.

manufacturing & machiningWe have a modern machine park and a team of 6 skilled workers who are experts in machining. Thus we can offer products in the very highest quality. Our personnel follow the entire process from customer request to produc-tion of documentation, which give us extreme control of the whole process and minimizes the chances of unnecessary deviations.

Other than machining, we also offer services within cutting and NDT.

americasWithin the Americas we have teamed several partners:

The Fastener Connection INC will be handling the technical sales in the US.

ICON Mining Solutions do the technical sales and manufacturing towards the mining industry in Canada.

Alatas Americas INC will handle the mechanical maintenance and our BSM program towards the oil&gas and marine industry in the Americas.

australasia For the Australasia region, we have teamed up with Ormarc Engineering, which serves as our technical sales partner, Mechanical maintenance and manufacturer partner for the region.

singapore, malaysia and indonesiaVF Fastening Systems PTE LTD is bondura® technology`s technical sales partner for this region.

bond

ura®

tech

nolo

gy w

orld

wid

e

Tord EikenChief Business Development Officer

[email protected]

Stop by our booth at:

bondura® partnerbondura® technology has focused a lot of our energy towards creating a larger and more focused footprint internationally over the past four years. Finding the right partners for our technology, line of products and programs has been absolutely key to support our customers in the best possible way throughout the market segments that bondura® operate within.

We are always searching for proactive technical sales and mechanical maintenance partners world-wide. Would you like to become a part of our team? Then please contact us at [email protected] and use subject “The Excellence of bondura®”.

Page 5: september 2015 - Bondura · with new customers and this means a lot to us. As our technology can be adapted to any kind of business or product, we constantly seek new op-portunity

americasThe Fastener Connection14820 FM 249/Tomball ParkwayHouston, TX 77086USA

www.thefastco.comtel +1 281 377 0885

canadaICON Mining Solutions40 Mumford Drive, LivelyOntario P3Y 1L2Canada

www.iconminingsolutions.comtel +1 705 923 7030

australasiaOrmarc Engineering11 - 13 Shanahan Way, Davenport, WA 6230Australia

www.ormarc.com.autel +618 (08) 9726 0310

singapore, malaysia, indonesiaVF Fastening Systems Pte Ltd10 Admiralty Street, #06-80 North Link BuildingSingapore 757695Singapore

www.vffastening.com.sgtel +65 6752 [email protected]

headquartersbondura® technology ASVardheivegen 56b4340 BryneNorway

www.bondura.notel +47 51 77 20 [email protected]