Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
Technical Hotline +44 (0)1268 563720
485
Simple Fit Switching PIR Sensors
DescriptionMK Simple Fit Sensors offer cost effective presence detection for lighting control in small to medium areas. This one-box solution is easy to install and commission, and requires no additional parts. Providing cost effective presence detection for lighting control. Simple Fit dual mount sensors are easy to install and can deliver energy savings of up to 70%*
FEATURES
� Presence detection by passive infrared
� Innovative dual mount system requires only one sensor for either flush or surface mount applications
� External programming dials enable quick adjustment of time and lux levels
� Off delay adjustable between 5 seconds and 18 minutes following the last observed movement after which the lights switch off
� PIR Lens provides 360 degree detection
� Detection Range of up to 6m diameter at 25°C at 2.5m mounting height
� Manual on / off override function
� Mounting Height: Recommended ceiling mount 1.8m to 3m
� Loading up to 6 Amps
� Ability to wire more than 1 sensor in parallel to a load
� Ability to switch volt free loads
� Lens mask included to mask out any areas of unwanted detection
K5017Flush and Surface Ceiling Mount PIR Sensor in one
� For flush mount, spring clips enable ease of installation in ceilings with thickness between 5mm and 20mm
� Simple to switch between flush and surface options
� Surface mount can be fixed direct to the ceiling or on to a circular conduit or BESA box
� All screws and fixings supplied
SWITCHABLE LOAD
Max 2000W
Max 600W
Max 500W
Max 120W
Max 110W
Max 75W
For a full range of corresponding products,
see pages 63-66 in the product selector.
TECHNICAL SPECIFICATION
TECHNOLOGYPIR
MAXIMUM RECOMMENDED MOUNTING HEIGHT1.8m to 3m
RANGECone-shaped detection pattern,6m radius at 2.5m mounting height
OPERATING VOLTAGEAC220~240V/50Hz
RECOMMENDED CIRCUIT PROTECTION16A
MAXIMUM LOAD6A or 600W fluorescent lightling load capacity
PHOTOCELLApprox. 5 - 1000 Lux
OFF DELAY5sec - 18min
COLOURWhite (RAL9010)
MATERIAL/ABSFlame retardant PC
IP RATINGSurface Mount: IP44Flush Mount: IP44 (Sensor section only)IP20 (Ceiling Board onwards)
K5017
DEPTH REQUIRED BEHIND CEILING50mm
WEIGHT269g
6.0m
Dimensions (mm)Flush Mount (Hole size 75mm to 80mm)
Surface Mount
4,17
17,92
4,17
17,92
104,28
104,18
56
104,28
104,18
56
Sensors Technical
WIR
ING
DE
VIC
ES
WH
ITE
68mm
40.8
mm
21.95mm
65.4
2mm
97.18mm
97.18mm
56mm
114.
63m
m
44.4
5mm
66.7
2mm
22.27mm
2.4o
56mm
17.92mm
mkelectric.co.uk
486
FEATURES
Simple Fit Switching PIR Sensors
DescriptionMK Simple Fit Sensors offer cost effective presence detection for lighting control in small to medium areas. These one-box solutions are easy to install and commission, also no additional parts are required.
The following versions are available:
� Flush mounted K5015 – Spring Clips enable ease of installation in plasterboard ceilings
� Surface Mounted K5016 – Screw and Plug Fixings can be mounted direct to the ceiling or on to a square pattress box (K2160 WHI)
Dimensions
K5015 K5016
11
Power requirement AC 220 ~ 240V / 50Hz
Lighting load (Max) 6A or 1500W fluorescent/incandescentlighting load capability
Detection angle Up to 360° at 25°C at 2.5m
Detection range 5m radius at 2.5m mounting height
Mounting height Recommended ceiling height 1.8m to 3m
Mounting type Flush mount
Isolation switch control AUTO/OFF
Time adjustment Adjustable 5 seconds ~ 40 minutes
Lux adjustment Approx. 30 ~ 200 Lux
Warm up time About 1 minute
Protection degree IP20
Safety CE
Product Dimensions
Specification
86mm
76mm
76mm
50042924-001 Rev.B_FM Sensor_Art.qxp:50042924 Rev.A_FM Sensor.qxp
11
Power requirement AC 220 ~ 240V / 50Hz
Lighting load (Max) 6A or 1500W fluorescent/incandescentlighting load capability
Detection angle Up to 360° at 25°C at 2.5m
Detection range 5m radius at 2.5m mounting height
Mounting height Recommended ceiling height 1.8m to 3m
Mounting type Flush mount
Isolation switch control AUTO/OFF
Time adjustment Adjustable 5 seconds ~ 40 minutes
Lux adjustment Approx. 30 ~ 200 Lux
Warm up time About 1 minute
Protection degree IP20
Safety CE
Product Dimensions
Specification
86mm
86mm
54.5mm
50042925-001 Rev.B_SM Sensor_Art.qxp:50042925 Rev.A_SM Sensor.qxp
K5016K5015
TECHNICAL SPECIFICATION
TECHNOLOGYPIR
MAXIMUM RECOMMENDED MOUNTING HEIGHT1.8m to 3m
RANGECone-shaped detection pattern,6m radius at 2.5m mounting height
OPERATING VOLTAGEAC220~240V/50Hz
RECOMMENDED CIRCUIT PROTECTION16A
MAXIMUM LOAD6A or 1500W fluorescent/incadescent lightling load capacity
PHOTOCELLApprox. 30~200 Lux
OFF DELAY5sec - 40min
COLOURWhite
MATERIALFlame retardant PCIP RATINGIP20
K5015
DEPTH REQUIRED BEHIND CEILING100mm
WEIGHT105g excluding cable
K5016
WEIGHT105g approx
6.0m
Advanced presence detection by passive infrared (PIR) technology
Passive photocell holds lights off when area becomes occupied in bright ambient conditions
0-40Off delay in minutes following the last observed movement after which lights switch off
6m Detection pattern and approx range in metres at fl oor level for 2.5m mounting height (detection pattern is cone shaped).
Sensors Technical
WIR
ING
DE
VIC
ES
WH
ITE
Technical Hotline +44 (0)1268 563720
487
DescriptionA range of high performance switching PIR sensors for dependable switching of lighting loads.
FEATURES
� High definition lenses, performance optics and software are all optimised to provide class leading sensitivity and occupancy detection ensuring that the lights are always on when required
� Superior switching sensors include integral adjustable active photocells which will hold the lights off in occupied areas or switch them off at a given light level
� Superior switching sensors deliver highly sensitive micro detection diameter of 7m within a 10m macro detection diameter (When installed at a mounting height of 2.5m)
� Colour coded connectors make superior switching sensors easy to install and reduce wiring faults
� The easy to use K4098 infrared programming tool simplifies sensor set up and commissioning
TECHNICAL SPECIFICATION
TECHNOLOGYPIR
DETECTION RANGE10m Macro / 7m Micro at 2.5m mounting height
SWITCHING CAPACITY10A (Tungsten 6A)
PHOTOCELL RANGE (LUX)Adjustable 10 to 1000 lux via K4098
DELAY TIME RANGEAdjustable 5mins to 40 mins via K4098
IP RATINGIP4X
SUPPLY VOLTAGEMains 230V
TEMPERATURE RANGE0-40 degrees
ACCESSORIESK4098 Infrared programming tool required to adjust sensor settings
Superior Switching PIR Sensors
K5030F K5030SM
Sensors Technical
WIR
ING
DE
VIC
ES
WH
ITE
Flush Mount
Surface Mount
ø 87mm
107.6mm
ø 93mm
ø 87mm
75mm
17.6mm
73mm
Aspect ratioMacro = 4:1
Micro = 2.8:1
Micro
7m
2.5m
1.5m 7m 1.5m
Micro Micro
mkelectric.co.uk
488
DescriptionA range of high performance PIR sensors for dependable control of digital dimming lighting loads.
FEATURES
� High definition lenses, performance optics and software are all optimised to provide class leading sensitivity and occupancy detection ensuring that the lights are always on when required
� Dimming sensors include integral photocells which will hold the lights off in occupied areas or switch them off at a given light level. Regulating photocells enable a constant light level to be maintained through digital dimming
� Superior PIR sensors deliver highly sensitive micro detection diameter of 7m within a 10m macro detection diameter (When installed at a mounting height of 2.5m)
� Automatic detection of DALI and DSI digital dimming type luminaires reduces commissioning time and the potential for errors
� The easy to use K4098 infrared programming tool simplifies sensor set up and commissioning
Superior PIRs for DALI or DSI Dimming
TECHNICAL SPECIFICATION
TECHNOLOGYPIR
DETECTION RANGE10m Macro / 7m Micro at 2.5m mounting height
SWITCHING CAPACITY10A (Tungsten 6A)
DIGITAL DIMMINGDALI or DSI (Auto detect)
ANALOGUE DIMMING1-10V
PHOTOCELL RANGE (LUX)Adjustable 100 to 1000 lux via K4098
DELAY TIME RANGEAdjustable 5mins to 40mins via K4098
IP RATINGIP4X
SUPPLY VOLTAGEMains 230V
TEMPERATURE RANGE0-40 degrees
ACCESSORIESK4098 Infrared programming tool required to adjust sensor settings
K5040F K5040SM
Sensors Technical
WIR
ING
DE
VIC
ES
WH
ITE
Flush Mount
Surface Mount
ø 87mm
107.
6mm
ø 93mm
ø 87mm
75mm
17.6mm
73mm
Aspect ratioMacro = 4:1
Micro = 2.8:1
Micro
7m
2.5m
1.5m 7m 1.5m
Micro Micro
Technical Hotline +44 (0)1268 563720
489
FEATURES
Battenfit SwitchingPIR Sensor
DescriptionIdeal for retrofi t installations, the BattenFit sensor is a simple-to-fi t control solution for batten style luminaires which can deliver energy savings of up to 70%
K4047
14
M2
0 x
1.5
M2
0 x
1.5
29
14
107
600
40
K4047
Detection Profile
Plan Viewo
Detection pattern is a 360 o
Detection pattern is a 360 o
cone shape. Diameter is 2.25 x the mounting height.
The squares show the arrangement of the detection pattern. Sensitivity is greater when approaching at a tangent rather than heading towards the centre.
Direction of most Direction of most commonly used commonly used entry into detection entry into detection zone, i.e. start of zone, i.e. start of corridor or doorwaycorridor or doorway
5m5m
5m
5m
2.5
m2.5
m
oo97
2.5m2.5m
DETECTION ZONEDETECTION ZONE
5.6m5.6m
BATTEN LUMINAIRE
Dimensions (mm)
TECHNICAL SPECIFICATION
MAXIMUM RECOMMENDED MOUNTING HEIGHT5.0m
RANGECone-shaped detection pattern,diameter (at floor level) = 2.4 x mounting height
6.0m
2.5m
OFF DELAY1 minute – 40mins 10 second walk test mode
PHOTOCELLAdjustable 50-5000 lux
OPERATING VOLTAGE230V 50Hz
RECOMMENDED CIRCUIT PROTECTION10 Amps
MAXIMUM LOAD2A
COLOURWhite
MATERIALFlame retardant PC/ABS
WEIGHT100g
IP RATINGIP65
ACCESSORIESK4098 Infrared programming tool required to adjust sensor settings
Advanced presence detection by passive infrared (PIR) technology
5 -35Off delay in hours following the last observed movement after which lights switch off
A Passive photocell holds lights off in bright ambient conditions. Active photocell has the capability to switch lights off in occupied areas
5m Detection pattern and range in meters under normal operating conditions
One Switch Manual input to turn luminaires on or off
Infrared programming enables easy commissioning and re-commissioning via K4058
IP IP65
Sensors Technical
WIR
ING
DE
VIC
ES
WH
ITE
mkelectric.co.uk
490
Ultrasonic Sensors
Features
Active presence detection by ultrasonic technology
Passive photocell holds lights off in bright ambient conditions
5-15Off delay in minutes following the last observed movement after which the lights switch off
13m6m Detection pattern and range in metres under normal operating conditions
Dimensions
K4031K4030
71mm
51mm
120mm
60mm
60mm
83mm
A sensor will fit to its own backplate or toa standard 25mm switch sinking box.
Flush Plate & Clamp (K4078)For simple flush mounting of detector tosuspended ceilings.Max clamping distance – 25mm
20mmbackentryknockout
3 x side entry knockout
Rear View
Ultrasonic sensors utilise ultrasonic radar to monitor a space for movement. This involves transmitting an ultrasound signal and examining the reflected signal for frequency variations called “doppler shifts”. The transmitted signal is more quickly dissipated in open space and squeezed out by constraining walls and ceilings. The range of the detector also depends upon the type of movement being observed: for example, walking activity can be observed at a greater distance than the slight hand or body movement to be expected from a person working at a desk. Note that detectors can see behind themselves slightly so must be inset in a storage aisle or corridor application.
K4030 – Surface versionThe back-box can be secured directly to a hard surface or to a conduit stop end box.
K4030 – Semi Flush versionUse a hole saw to drill a 76mm hole into the ceiling tile. The flush ring is designed to clamp the tile between its two halves.
TECHNICAL SPECIFICATION
OPERATING VOLTAGE230V 50Hz
MAXIMUM RECOMMENDED MOUNTING HEIGHT5 metres
SWITCH CAPACITY10 Amps – Incandescent lamps: 1500W max (230V)
TERMINAL CAPACITY2 x 1.5mm or 1 x 2.5mm
WEIGHT148g
TIME DELAY5, 10 or 15 mins
POWER-UP CONDITIONselect on or off
DETECTOR RANGEadjustable
ON/OFF RANGES:adjustable
ULTRASONIC FREQUENCY40kHz
PHOTOCELLadjustable 50 to 5000 lux
DescriptionUltrasonic sensors are general purpose, fully automatic, directional presence detectors with photocell. They save energy by switching off lights in unoccupied areas and by holding lights off in occupied areas which have adequate natural light. They use a specially developed ultrasonic radar to monitor the controlled space for movement. This radar is sensitive enough to respond to even very small movements thus ensuring that lights are sustained whenever the controlled space is occupied. If no movement has been detected for a pre-selected period, the sensors switch the lights off until the next visitor is detected.
The sensors control feature a movement detector, photocell and 10 Amp load switching element in one easily deployed housing. The technology has been refined and improved over many years of efficient, reliable service in a wide range of industrial and commercial environments. The latest designs use state-of-the-art miniaturisation to pack the features into a small, attractive yet rugged enclosure which gives full field-of-view adjustment. Detectors are available for surface or semi-flush mounting.
71mm
51mm
120mm
60mm
60mm
83mm
A sensor will fit to its own backplate or toa standard 25mm switch sinking box.
Flush Plate & Clamp (K4078)For simple flush mounting of detector tosuspended ceilings.Max clamping distance – 25mm
20mmbackentryknockout
3 x side entry knockout
Rear View
Sensors Technical
WIR
ING
DE
VIC
ES
WHITE
Technical Hotline +44 (0)1268 563720
491
FEATURES K4058
� 3 simple time-delay settings (5 minutes/10 minutes/20 minutes)
� Presence detection mode
� Absence detection mode
� Enable/disable photocell
� Walk-test feature
FEATURES K4059
� 4 simple time-delay settings (5 minutes/10 minutes/20 minutes/40 minutes)
� Presence detection mode
� Absence detection mode
� Enable/disable photocell
� Walk-test feature
� Set regulating light level - when used in conjunction with a suitable lux meter
� Restore button functionality - press & hold reverts to factory default, short press reverts back to last configuration
� Lamp burn-in
Hand-Held Programming Tools
DescriptionMK sensors* feature a range of programmable parameters which can be adjusted using a simple, low cost hand-held programming controller.
*Not including Simple fi t
K4058 K4059
TECHNICAL SPECIFICATION
TRANSMISSION METHODInfrared
RANGE15m approx
BATTERY3Vdc CR2032 Lithium Button Cell
EXPECTED BATTERY LIFE3 years
STORAGE TEMPERATURE-25°C to +70°C
OPERATING TEMPERATURE0°C to 40°C
IP RATING4X
APPROVALCE
DIMENSIONSK4058:87mm (H) x 40mm (W) x 7mm (D)K4059:100mm (H) x 50mm (W) x 7mm (D)
WEIGHT20g approx
Sensors Technical
WIR
ING
DE
VIC
ES
WH
ITE